Encapsulation of Essential Oils via Nanoprecipitation Process: Overview, Progress, Challenges and Prospects

Enhanced Anti-Inflammatory and Skin Barrier Repair Effects of Nanoemulsions Supplemented with Boesenbergia rotunda for Atopic Dermatitis

Betamethasone dipropionate (BD) is a potent anti-inflammatory drug for atopic dermatitis (AD); however, it leads to serious adverse effects during prolonged use. We aimed to improve the biochemical properties and lower the risk of toxicity by preparing nanoemulsions containing Boesenbergia rotunda rhizome hexane extract (Hex) and essential oils (EO). Physicochemical characterization and 3-month long-term stability testing were conducted. Gas chromatography-mass spectrometry analysis was used to compare the volatile composition after nanoemulsion formulation. Further, various assays related to AD management, including antioxidant potentials, anti-inflammatory activities through inhibition of 5-lipoxygenase and cyclooxygenase-2, and nitric oxide release suppression in lipopolysaccharides-induced RAW 264.7 macrophages, were investigated. In addition, antibacterial activity against Staphylococcus aureus and cytotoxicity to RAW 264.7 macrophages and HaCaT human keratinocyte cells were also evaluated. Monodispersed nanoemulsions (<20 nm) were successfully generated by an ultrasound-assisted method. BD was successfully encapsulated into B. rotunda-based nanoemulsions with more than 95% encapsulation efficiency (EE). The major phytochemicals present in EO and Hex remained after nanoemulsion formulation. The nanoemulsions were compatible with skin pH (5.2-5.8) and exhibited stability with respect to particle size, polydispersity index, transmittance, pH, and EE when stored for 3 months at -20 °C. The BD nanoemulsions loaded with B. rotunda exhibited antioxidant activities and significantly increased the 5-lipoxygenase inhibitory activity. Furthermore, the suppression of nitric oxide release was remarkably enhanced, whereas lower cytotoxicity was observed. The BD nanoemulsions improved the level of involucrin and filaggrin in HaCaT cells, implying their valuable property for skin barrier repair. The formulation of BD into nanoemulsions also enhanced S. aureus inhibition. Either B. rotunda nanoemulsions loaded with or without BD show promise for the topical treatment and prevention of AD.

Nanoencapsulation of Ocimum basilicum L. and Satureja montana L. Essential Oil Mixtures: Enhanced Antimicrobial and Antioxidant Activity

Background/Objectives: Essential oils (EOs) represent a natural alternative to chemical additives due to their biological activity. This study evaluated the antimicrobial and antioxidant activities of basil and winter savory EO mixtures, their interactions, and the biological potential of chitosan-based nano-encapsulated EO mixtures. Methods: Mixtures of basil and winter savory EOs (ratios 1:1, 2:1, 4:1, 8:1, and 16:1) were analyzed for chemical composition via GC-MS. Antimicrobial activity was assessed using minimal inhibition (MIC) and bactericidal (MBC) concentration assays, and interactions were quantified with fractional inhibitory concentration indices (FICIs). Antioxidant activity was evaluated using the DPPH assay, with combination indices used to interpret interaction effects. Chitosan-based nanoparticles were made with the selected oil mixture (2:1), after which characterization and biological activity were performed. Results: The EO mixture with 2:1 ratio exhibited the strongest joint activity, with synergistic or additive effect against four out of six analyzed microorganisms. Antioxidant activity improved with higher basil proportions, with the 16:1 ratio achieving the lowest EC50 value of 0.052 mg/mL after 120 min and demonstrating synergistic effects at all tested ratios. Higher basil EO content also masked the strong odor of winter savory EO. The biological activity of chitosan-based nanoparticles was increased by encapsulation of the EO mixture (2:1), with an encapsulation efficiency of 75.39%. Conclusions: The EO mixture (2:1) showed best antimicrobial efficacy, with synergistic or additive effects. The nano-encapsulated mixture showed good biological potential with effective and complete odor neutralization. These results indicate the potential of basil and winter savory essential oil mixtures for sustainable food preservation applications.

The antibacterial capabilities of alginate encapsulated lemon essential oil nanocapsules against multi-drug-resistant Acinetobacter baumannii

Controlling microbial pollutants is a significant public health concern as they cause several chronic microbial infections and illnesses. In recent years, essential oils (EOs) have become intriguing alternatives for synthetic antimicrobials due to their biodegradability, natural source extraction, and strong antibacterial properties. The bactericidal properties of alginate containing lemon essential oil were examined in this investigation. Following the screening of the MDR strains, the morphological properties of the produced nanoparticles were examined using SEM, DLS, and FTIR. Additionally, the durability, effectiveness, and drug dispersion of encapsulation were assessed. Bacterial virulence factor gene amounts were measured using Q-real-time PCR. Concurrently, the cytotoxic effect of the nanomaterials was evaluated using MTT techniques. Nanoparticles of lemon essential oil encapsulated in alginate, measuring 500 ± 19.32 nm in size, with entrapment efficiency of 77.73 ± 1.78% and were stable for 60 days at 4 °C. Alginate encapsulated with lemon essential oil nanoparticles (ALN) exhibited potent antibacterial qualities, according to the biological investigation. Their ability to decrease the transcription of bacterial virulence genes at least statistically significantly (P ≤ 0.05) served as evidence for this. Between 1.56 and 100 µg/mL (P ≤ 0.01), ALN exhibited lower cytotoxicity against CCD841CoN than free lemon essential oil. The findings show that ALN nanoparticles have the potential to be a breakthrough in the fight against highly resistant illnesses. ALN nanoparticles' potent antibacterial efficacy against MDR strains of Acinetobacter baumannii may inspire new directions in antibacterial research.

Unveiling the nanoworld of antimicrobial resistance: integrating nature and nanotechnology

A significant global health crisis is predicted to emerge due to antimicrobial resistance by 2050, with an estimated 10 million deaths annually. Increasing antibiotic resistance necessitates continuous therapeutic innovation as conventional antibiotic treatments become increasingly ineffective. The naturally occurring antibacterial, antifungal, and antiviral compounds offer a viable alternative to synthetic antibiotics. This review presents bacterial resistance mechanisms, nanocarriers for drug delivery, and plant-based compounds for nanoformulations, particularly nanoantibiotics (nAbts). Green synthesis of nanoparticles has emerged as a revolutionary approach, as it enhances the effectiveness, specificity, and transport of encapsulated antimicrobials. In addition to minimizing systemic side effects, these nanocarriers can maximize therapeutic impact by delivering the antimicrobials directly to the infection site. Furthermore, combining two or more antibiotics within these nanoparticles often exhibits synergistic effects, enhancing the effectiveness against drug-resistant bacteria. Antimicrobial agents are routinely obtained from secondary metabolites of plants, including essential oils, phenols, polyphenols, alkaloids, and others. Integrating plant-based antibacterial agents and conventional antibiotics, assisted by suitable nanocarriers for codelivery, is a potential solution for addressing bacterial resistance. In addition to increasing their effectiveness and boosting the immune system, this synergistic approach provides a safer and more effective method of tackling future bacterial infections.

Nanoencapsulated Essential Oils for Post-Harvest Preservation of Stored Cereals: A Review

Cereal grains are frequently attacked by microorganisms and insects during storage and processing, which negatively affects their quality, safety, and market value. Therefore, protecting stored grains from microbial contamination is crucial for food industries, farmers, public health associations, and environmental agencies. Due to the negative impact of synthetic gray chemicals, antimicrobial plant-based essential oils (EOs) can serve as alternative, safer, environmentally friendly preservatives that can prolong the shelf life of cereals. However, high volatility, low solubility, hydrophobicity, and quick oxidation limit their practical applicability. Using nanotechnology for the nanoencapsulation of EOs into polymeric matrices allows sustained release and ensures targeted delivery without significantly altering the organoleptic attributes of cereals, making EOs a new-generation green preservative. This ultimately overcomes the challenges of practical applications. The application of nanoencapsulated EOs in grain storage provides an effective and novel defense against microbes, insects, and other contaminants. Hence, the current review thoroughly examines the preservative potential of nanoencapsulated EOs in terms of antimicrobial and insecticidal efficacy for protecting stored cereal grains. It also highlights the challenges encountered during application and the safety concerns of using nanoencapsulated EOs in protecting cereal grains during post-harvest storage.

Nanoencapsulation of Achyrocline satureioides (Lam) DC-Essential Oil and Controlled Release: Experiments and Modeling

Background/Objectives: Degradation by physical and chemical agents affects the properties of essential oils; therefore, this study aimed to protect the volatile compounds present in essential oils through biopolymer encapsulation. Methods: The Achyrocline satureioides (Lam) DC. essential oil was obtained by steam distillation at 2.5 bar. The nano-sized physical coating of the active oil core resulted in an optimal polymer/oil ratio of 1:3 and particle diameter of 178 nm. The particle morphology was evaluated using scanning electron microscopy and transmission electron microscopy. The inclusion of the essential oil in the polymer was confirmed using thermogravimetric analysis. Results: The pH of the formulation remained stable for 90 days, and controlled release and encapsulation efficiencies were evaluated. Formulations were evaluated using the perfumery radar technique, which indicated a predominantly woody profile. The diffusion of fragrant compounds in the air was assessed over time and mathematically modeled. Conclusions: The produced nanostructures were efficient for the controlled release of volatile compounds from the essential oil of Achyrocline satureioides.

Preparation and characterization of polyphenol-chitosan conjugate-eugenol essential oil microcapsule and its effect on storage behavior of cherry tomato

Given the high volatility, low water solubility, and oxidative sensitivity of essential oils, this study synthesized microcapsules of essential oil (EEO) (quercetin-chitosan-EEO [QE-CS-EEO]) using a QE-CS graft copolymer as the wall material and EEO as the core material. Research findings indicate that QE-CS exhibits superior in vitro antioxidant activity, with scavenging abilities for 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) ABTS+ radicals being 58.71% and 77.03% greater than those of CS, respectively, thereby providing more effective protection for the essential oil. In comparison to CS essential oil, microcapsules (CS-EEO), QE-CS-EEO demonstrated an 18.65% increase in EEO encapsulation efficiency, achieving a total encapsulation efficiency of 41.29%. Based on these results, various edible coating solutions were formulated, including Control, E1 (1% CS), E2 (0.5% CS + 0.5% CS-EEO), E3 (0.5% CS + 0.5% QE-CS-EEO), and E4 (1% EEO), to extend the shelf life of cherry tomatoes. Notably, cherry tomatoes treated with the E3 formulation maintained superior freshness indicators, exhibiting an extended shelf life of approximately 9-12 days compared to the control group. This study aims to explore a novel microcapsule wall material and provide a strategy for extending the shelf life of fruits and vegetables, thereby minimizing food waste.

Hydrogels with Essential Oils: Recent Advances in Designs and Applications

The innovative fusion of essential oils with hydrogel engineering offers an optimistic perspective for the design and development of next-generation materials incorporating natural bioactive compounds. This review provides a comprehensive overview of the latest advances in the use of hydrogels containing essential oils for biomedical, dental, cosmetic, food, food packaging, and restoration of cultural heritage applications. Polymeric sources, methods of obtaining, cross-linking techniques, and functional properties of hydrogels are discussed. The unique characteristics of polymer hydrogels containing bioactive agents are highlighted. These include biocompatibility, nontoxicity, effective antibacterial activity, control of the sustained and prolonged release of active substances, optimal porosity, and outstanding cytocompatibility. Additionally, the specific characteristics and distinctive properties of essential oils are explored, along with their extraction and encapsulation methods. The advantages and disadvantages of these methods are also discussed. We have considered limitations due to volatility, solubility, environmental factors, and stability. The importance of loading essential oils in hydrogels, their stability, and biological activity is analyzed. This review highlights through an in-depth analysis, the recent innovations, challenges, and future prospects of hydrogels encapsulated with essential oils and their potential for multiple applications including biomedicine, dentistry, cosmetics, food, food packaging, and cultural heritage conservation.

Optimization of organogels prepared with turpentine oil and wax mixtures via response surface methodology and determination of vaporization kinetic parameters

BACKGROUND

The main aim of the study is to investigate the thermal, textural and vaporization behaviors of turpentine oil (representing essential oils) organogels prepared with wax mixtures (beeswax, BW; shellac wax, SHW) instead of a single wax. The second aim was to determine the optimum level of wax addition to minimize vaporization of volatiles using response surface methodology.

RESULTS

Both weighing and thermogravimetric analyses showed that when the total wax concentration increased, the vaporization was decelerated. The variation of the hardness and melting point values depended on both wax types and amounts in the mixtures. Additionally, the kinetics of the vaporization of the volatile compounds at 37 °C were evaluated, and both first- and second-order reaction kinetic models fitted well for the vaporization with R2 values of 0.96-0.99. The organogelation increased the thermal stability and limited the release of volatiles. The multiple response optimization results showed that the melting point, the reaction rate constant and the weight loss of the organogels produced with 24.43% BW and 17.68% SHW were 44.40 °C, 4.00 × 10-3 day-1 and 30.02%, respectively.

CONCLUSION

As a result, essential oil organogels produced with a wax mixture instead of a single wax can provide controlled release of volatiles as well as tailored texture and melting range. © 2024 Society of Chemical Industry.

Phytochemical-Based Nanoantioxidants Stabilized with Polyvinylpyrrolidone for Enhanced Antibacterial, Antioxidant, and Anti-Inflammatory Activities

Despite the inhibitory effect of phytoncide (Pht) on food-borne pathogenic bacterial growth, the hydrophobic nature and susceptibility to biodegradation under physiological conditions limits its applications. Here, we developed Pht-loaded polyvinylpyrrolidone (PVP) micelles (Pht@PVP MC) via micelle packing. Pht was solubilized using different types of PVP as micellar vehicles. The as-prepared Pht@PVP MCs were characterized using dynamic light scattering and transmission electron microscopy. The sizes of the Pht@PVP MCs were controlled from 301 ± 51 to 80 ± 3 nm by adjusting the PVP content. The polydispersity index of Pht@PVP MC was between 0.21 ± 0.03 and 0.16 ± 0.04, indicating homogeneous size. A colony-counting method was employed to evaluate the improvement in antibacterial activity after Pht encapsulation in PVP micelles. The reactive oxygen species (ROS)-scavenging activity and anti-inflammatory efficacy of Pht@PVP MC were analyzed in a concentration range of 10-100 μg/mL by evaluating in vitro ROS and nitric oxide levels using DCFDA and Griess reagents. PVP with both hydrophobic and hydrophilic moieties improved the aqueous solubility of Pht and stabilized it via steric hindrance. Higher-molecular-weight PVP at higher concentrations resulted in a smaller hydrodynamic diameter of Pht@PVP MC with uniform size distribution. The spherical Pht@PVP MC maintained its size and polydispersity index in a biological buffer for 2 weeks. Pht@PVP MC exhibited enhanced antibacterial activity compared to bare Pht. The growth of Staphylococcus aureus was effectively inhibited by Pht@PVP MC treatment. Furthermore, biocompatible Pht@PVP MC exhibited dose-dependent antioxidant and anti-inflammatory activities in vitro. Overall, Pht@PVP MC is an effective alternative to synthetic antibacterial, antioxidant, and anti-inflammatory chemicals.

Polymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review

Wound healing can result in complex problems, and discovering an effective method to improve the healing process is essential. Polymeric biomaterials have structures similar to those identified in the extracellular matrix of the tissue to be regenerated and also avoid chronic inflammation, and immunological reactions. To obtain smart and effective dressings, bioactive agents, such as essential oils, are also used to promote a wide range of biological properties, which can accelerate the healing process. Therefore, we intend to explore advances in the potential for applying hybrid materials in wound healing. For this, fifty scientific articles dated from 2010 to 2023 were investigated using the Web of Science, Scopus, Science Direct, and PubMed databases. The principles of the healing process, use of polymers, type and properties of essential oils and processing techniques, and characteristics of dressings were identified. Thus, the plants Syzygium romanticum or Eugenia caryophyllata, Origanum vulgare, and Cinnamomum zeylanicum present prospects for application in clinical trials due to their proven effects on wound healing and reducing the incidence of inflammatory cells in the site of injury. The antimicrobial effect of essential oils is mainly due to polyphenols and terpenes such as eugenol, cinnamaldehyde, carvacrol, and thymol.

Chitosan nanoparticles incorporate with curry leaf essential oil: Physicochemical characterization and in vitro release properties

The use of essential oils as natural antioxidant, antimicrobial and insect repellent agent was limited by the loss of bioactive components especially volatile compounds. This study aimed to improve biological properties of curry leaf essential oil (CLEO) by producing nanometer sized particles through two different synthesis techniques; nanoencapsulation and nanoprecipitation. The methods produced different nanostructures; nanocapsules and nanospheres distinguished by the morphological structure (TEM analysis). Successful loading of CLEO into chitosan nanocarrier was proven by FTIR spectra. Zeta potential values for both nanostructures were more than +30 mV implying their stability against aggregation. CLEO loaded nanocapsules exhibited highest antibacterial properties against Gram-positive bacteria compared to nanospheres. Meanwhile, CLEO loaded nanospheres recorded up until 90.44 % DPPH radical scavenging properties, higher compared to nanocapsules. Both nanostructures demonstrated further improvement in antioxidant and antibacterial activities with the incorporation of higher chitosan concentration. In vitro release analysis indicated that CLEO undergo two-stage discharge mechanism where fast discharge occurred up until 12 h followed by sustained released afterwards. The two synthesis methods applied synergistically with greater chitosan concentration successfully produced nanostructures with >60 % encapsulation efficiency (EE). This concluded that both techniques were reliable to protect the bioactive constituents of CLEO for further used.

Chitosan-Based Nanoencapsulated Essential Oils: Potential Leads against Breast Cancer Cells in Preclinical Studies

Since ancient times, essential oils (EOs) derived from aromatic plants have played a significant role in promoting human health. EOs are widely used in biomedical applications due to their medicinal properties. EOs and their constituents have been extensively studied for treating various health-related disorders, including cancer. Nonetheless, their biomedical applications are limited due to several drawbacks. Recent advances in nanotechnology offer the potential for utilising EO-loaded nanoparticles in the treatment of various diseases. In this aspect, chitosan (CS) appears as an exceptional encapsulating agent owing to its beneficial attributes. This review highlights the use of bioactive EOs and their constituents against breast cancer cells. Challenges associated with the use of EOs in biomedical applications are addressed. Essential information on the benefits of CS as an encapsulant, the advantages of nanoencapsulated EOs, and the cytotoxic actions of CS-based nanoencapsulated EOs against breast cancer cells is emphasised. Overall, the nanodelivery of bioactive EOs employing polymeric CS represents a promising avenue against breast cancer cells in preclinical studies.

Essential oils and their nanoformulations for breast cancer therapy

Breast Cancer (BC) is the most prevalent type of cancer in the world. Current treatments include surgery, radiation, and chemotherapy but often are associated with high toxicity to normal tissues, chemoresistance, and relapse. Thus, developing novel therapies which could combat these limitations is essential for effective treatment. In this context, phytochemicals are increasingly getting popular due to their safety profile, ability to efficiently target tumors, and circumvent limitations of existing treatments. Essential Oils (EOs) are mixtures of various phytochemicals which have shown potential anticancer activity in preclinical BC models. However, their clinical translation is limited by factors such as high volatility, low stability, and poor solubility. Nanotechnology has facilitated their encapsulation in a variety of nanostructures and proven to overcome these limitations. In this review, we have efficiently summarized the current knowledge on the anticancer effect of EOs and constituents in both in in vitro and in in vivo BC models. Further, we also provide a descriptive account on the potential of nanotechnology in enhancing the anti-BC activity of EOs and their constituents. The papers discussed in this review were selected using the keywords "antiproliferative Essential Oils in breast cancer," "anticancer activity of Essential Oil in breast cancer," and "cytotoxicity of Essential Oils in breast cancer" performed in PubMed and ScienceDirect databases.

"Review of strategic methods for encapsulating essential oils into chitosan nanosystems and their applications"

Essential oils (EOs) are hydrophobic, concentrated extracts of botanical origin containing diverse bioactive molecules that have been used for their biomedical properties. On the other hand, the volatility, toxicity, and hydrophobicity limited their use in their pure form. Therefore, nano-encapsulation of EOs in a biodegradable polymeric platform showed a solution. Chitosan (CS) is a biodegradable polymer that has been intensively used for EOs encapsulation. Various approaches such as homogenization, probe sonication, electrospinning, and 3D printing have been utilized to integrate EOs in CS polymer. Different CS-based platforms were investigated for EOs encapsulation such as nanoparticles (NPs), nanofibers, films, nanoemulsions, 3D printed composites, and hydrogels. Biological applications of encapsulating EOs in CS include antioxidant, antimicrobial, and anticancer functions. This review explores the principles for nanoencapsulation strategies, and the available technologies are also reviewed, in addition to an in-depth overview of the current research and application of nano-encapsulated EOs.

Progress of nanopreparation technology applied to volatile oil drug delivery systems

Traditional Chinese medicine volatile oil has a long history and possesses extensive pharmacological activity. However, volatile oils have characteristics such as strong volatility, poor water solubility, low bioavailability, and poor targeting, which limit their application. The use of volatile oil nano drug delivery systems can effectively improve the drawbacks of volatile oils, enhance their bioavailability and chemical stability, and reduce their volatility and toxicity. This article first introduces the limitations of the components of traditional Chinese medicine volatile oils, discusses the main classifications and latest developments of volatile oil nano formulations, and briefly describes the preparation methods of traditional Chinese medicine volatile oil nano formulations. Secondly, the limitations of nano formulation technology are discussed, along with future challenges and prospects. A deeper understanding of the role of nanotechnology in traditional Chinese medicine volatile oils will contribute to the modernization of volatile oils and broaden their application value.

Novel delivery system with a dual–trigger release of savory essential oil by mesoporous silica nanospheres and its possible targets in leukemia cancer cells: in vitro study

Introduction

Essential oils (EOs) are complex structures and possess several pharmacological effects. Nanomedicine offers a solution for their major limitations, including poor solubility, volatility, and non–controlled release, preventing their clinical use.

Methods

Here, we developed a novel delivery system by nanoformulations that were prepared by impregnating savory essential oil (SA) into mesoporous silica nanoparticles (MSNs). The nanoformulations were characterized and examined for their anticancer activities on cancer cells (HepG2 liver and HL60 leukemia cells) and MRC5 normal cells. We further tested the mechanisms of action and possible molecular targets against HL60 cells.

Results

The results demonstrated that SA was governed by nanoformulations under the dual–trigger release of pH/glutathione, and it typically fit the Korsmeyer–Peppas kinetic model. The nanoformulations enhanced the anticancer effect against HepG2 cells and HL60 cells compared to SA but were less cytotoxic to MRC5 normal cells and regulated various molecular pathways of apoptosis. Most importantly, new results were obtained on the genetic regulation principle through the high inhibition of long noncoding RNAs (HOTAIR, HULC, CCAT1, and H19) and matrix metalloproteinases (MMP–2 and MMP–9), providing a novel leukemia target.

Conclusions

These results suggest potential impacts for nanoformulations composed of SA with a sustained release pattern controlled by dual–trigger release of pH/GSH that enhanced anticancer cells. This approach may offer a new route for using EOs as new targets for cancers and open the door for deep preclinical investigations.

Development of Essential Oil-Loaded Polymeric Nanocapsules as Skin Delivery Systems: Biophysical Parameters and Dermatokinetics Ex Vivo Evaluation

Essential oils (EOs) are natural antioxidant alternatives that reduce skin damage. However, EOs are highly volatile; therefore, their nanoencapsulation represents a feasible alternative to increase their stability and favor their residence time on the skin to guarantee their effect. In this study, EOs of Rosmarinus officinalis and Lavandula dentata were nanoencapsulated and evaluated as skin delivery systems with potential antioxidant activity. The EOs were characterized and incorporated into polymeric nanocapsules (NC-EOs) using nanoprecipitation. The antioxidant activity was evaluated using the ferric thiocyanate method. The ex vivo effects on pig skin were evaluated based on biophysical parameters using bioengineering techniques. An ex vivo dermatokinetic evaluation on pig skin was performed using modified Franz cells and the tape-stripping technique. The results showed that the EOs had good antioxidant activity (>65%), which was maintained after nanoencapsulation and purification. The nanoencapsulation of the EOs favored its deposition in the stratum corneum compared to free EOs; the highest deposition rate was obtained for 1,8-cineole, a major component of L. dentata, at 1 h contact time, compared to R. officinalis with a major deposition of the camphor component. In conclusion, NC-EOs can be used as an alternative antioxidant for skin care.

Red sacaca essential oil-loaded nanostructured lipid carriers optimized by factorial design: cytotoxicity and cellular reactive oxygen species levels

Amazonian flora includes several species with the potential to develop pharmaceutical and biotechnological products. The essential oils from Amazonian species possess some biological properties, such as antioxidant, antibacterial, and cytotoxic activities. The essential oil of red sacaca (RSO), Croton cajucara Benth., contains metabolites characterized by antioxidant and anti-inflammatory activities. Nanostructured lipid carriers (NLC) are an advantageous alternative for the effective delivery of drugs because they can solubilize lipophilic actives and reduce their cytotoxicity. This study aimed to optimize the synthesis of RSO-loaded nanostructured lipid carriers (NLC-RSO) using a 23 factorial design and investigate their antioxidant and cytotoxic effects. The red sacaca essential oil (RSO) metabolite profile was characterized using gas chromatography coupled with a mass spectrometer (GC-MS), identifying 33 metabolites, with linalool and 7-hydroxy-calamenene as the major ones, as reported in the literature. The optimized NLC-RSO formulation had a particle size less than 100 nm and a polydispersity index lower than 0.25. After characterizing NLC-RSO using Fourier-transform infrared spectroscopy, powder X-ray diffraction, zeta potential, moisture content, and wettability, in vitro cytotoxicity were performed in A549 and BEAS-2B cell lines using the resazurin metabolism assay. The data indicated a lower IC50 for RSO than for NLC-RSOs in both cell lines. Furthermore, low cytotoxicity of blank nanoparticles (blank NP) and medium chain triglycerides-loaded nanostructured lipid carriers (NLC-MCT) towards both pulmonary cell lines was noted. At a concentration of 50-100 μg/mL, free RSO exhibited higher cytotoxicity than NLC-RSO, demonstrating the protective effect of this lipid carrier in reducing cytotoxicity during metabolite delivery. Similarly, free RSO showed higher 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging than NLC-RSO, also indicating this protective effect. The 2',7'-dichlorofluorescein diacetate (DCFH-DA) intracellular reactive oxygen species (ROS) level assay did not show differences between the treatments at higher but non-cytotoxic dosages. Taken together, our results suggest that NLC-RSOs are potential RSO delivery systems for applications related to cancer treatment.

Fabrication of a protein-dextran conjugates formed oral nanoemulsion and its application to deliver the essential oil from Alpinia zerumbet Fructus

The injury of vascular endothelial cells caused by high glucose (HG) is one of the driving factors of vascular complications of diabetes. Oral administration is the most common route of administration for the treatment of diabetes and its vascular complications. Essential oil extracts from Chinese medicine possess potential therapeutic effects on vascular endothelial injury. However, low solubility and volatility of essential oils generally result in poor oral absorption. Development of nanocarriers for essential oils is a promising strategy to overcome the physiological barriers of oral absorption. In this study, a nanoemulsion composed of bovine serum albumin (BSA)-dextran sulfate (DS) conjugate and sodium deoxycholate (SD) was constructed. The nanoemulsions were verified with promoted oral absorption and prolonged circulation time. After the primary evaluation of the nanoemulsion, essential oil from Alpinia zerumbet Fructus (EOFAZ)-loaded nanoemulsion (denoted as EOFAZ@BD5/S) was prepared and characterized. Compared to the free EOFAZ, EOFAZ@BD5/S increased the protective effects on HG-induced HUVEC injury in vitro and ameliorative effects on the vascular endothelium disorder and tunica media fibroelastosis in a T2DM mouse model. Collectively, this study provides a nanoemulsion for the oral delivery of essential oils, which holds strong promise in the treatment of diabetes-induced vascular endothelial injury.

Liquid-Liquid Phase Separation Induced by Vapor Transfer in Evaporative Binary Sessile Droplets

Drying of binary sessile droplets consisting of ethanol and octamethyltrisiloxane on a high-energy surface is investigated. During the process of evaporation, the droplets undergo liquid-liquid phase separation, resulting in the appearance of microdroplets at the liquid-air interface, which subsequently violently burst. This phase separation is attributed to water vapor transfer into the droplet, which modifies the solubility and leads to the formation of a ternary mixture. The newly formed ternary mixture may undergo nucleation and growth or spinodal decomposition, depending on the droplet composition path. By control of the relative humidity of air, phase separation can be mitigated or even eliminated. The droplets also display high mobility and complex wetting behavior due to phase separation, with two contracting and two spreading stages. The mass loss experiments reveal that the droplets undergo three distinct drying stages with an enhanced evaporation rate observed during the phase separation stage. A modified diffusion-limited model was employed to predict the evaporation rate, accounting for the physiochemical changes during evaporation and proved to be consistent with experimental observations. The findings of this work enhance our understanding of a coupled fundamental process involving the evaporation of multicomponent mixtures, wetting, and phase separation.

Advances in the Discovery of Efflux Pump Inhibitors as Novel Potentiators to Control Antimicrobial-Resistant Pathogens

The excessive use of antibiotics has led to the emergence of multidrug-resistant (MDR) pathogens in clinical settings and food-producing animals, posing significant challenges to clinical management and food control. Over the past few decades, the discovery of antimicrobials has slowed down, leading to a lack of treatment options for clinical infectious diseases and foodborne illnesses. Given the increasing prevalence of antibiotic resistance and the limited availability of effective antibiotics, the discovery of novel antibiotic potentiators may prove useful for the treatment of bacterial infections. The application of antibiotics combined with antibiotic potentiators has demonstrated successful outcomes in bench-scale experiments and clinical settings. For instance, the use of efflux pump inhibitors (EPIs) in combination with antibiotics showed effective inhibition of MDR pathogens. Thus, this review aims to enable the possibility of using novel EPIs as potential adjuvants to effectively control MDR pathogens. Specifically, it provides a comprehensive summary of the advances in novel EPI discovery and the underlying mechanisms that restore antimicrobial activity. In addition, we also characterize plant-derived EPIs as novel potentiators. This review provides insights into current challenges and potential strategies for future advancements in fighting antibiotic resistance.

Synergy between amikacin and Protium heptaphyllum essential oil against polymyxin resistance Klebsiella pneumoniae

AIMS

We investigated the chemical composition and the in vitro and in vivo antibacterial effects of Protium heptaphyllum essential oil (PHEO) alone and in combination with antibiotics against polymyxin-resistant Klebsiella pneumoniae isolates.

METHODS AND RESULTS

Hydrodistillation was used to obtain PHEO, and gas chromatography coupled with mass spectrometry revealed α-pinene, δ-3-carene, and β-pinene as major components present in PHEO. Minimum inhibitory concentration was determined using the broth microdilution technique and ranged from 256 to 512 µg ml-1. The checkerboard method showed synergy with the combination of PHEO and amikacin (AMK) against the polymyxin-resistant K. pneumoniae isolates. In 8 of the 10 isolates tested, the fractional inhibitory concentration indexes (FICIs) ranged from 0.06 to 0.5, while in the remaining two isolates, the combination exerted an additive effect (FICI of 0.6 and 1.0), resulting in AMK dose reduce of range 2- to 16-fold, in the presence of PHEO. Analysis using zero interaction potency revealed high synergy score (63.9). In the in vivo assay, the survival of Caenorhabditis elegans was significantly improved in the presence of PHEO (1 µg ml-1) + AMK (µg ml-1) combination as compared to 32 µg ml-1 AMK alone. Furthermore, PHEO concentrations of 256 and 512 µg ml-1 were found to be non-toxic on the experimental model.

CONCLUSION

To our knowledge, this is the first report of such type of synergism demonstrating an antimicrobial effect against polymyxin-resistant K. pneumoniae isolates.

The mechanism, biopolymers and active compounds for the production of nanoparticles by anti-solvent precipitation: A review

The anti-solvent precipitation method has been investigated to produce biopolymeric nanoparticles in recent years. Biopolymeric nanoparticles have better water solubility and stability when compared with unmodified biopolymers. This review article focuses on the analysis of the state of the art available in the last ten years about the production mechanism and biopolymer type, as well as the used of these nanomaterials to encapsulate biological compounds, and the potential applications of biopolymeric nanoparticles in food sector. The revised literature revealed the importance to understand the anti-solvent precipitation mechanism since biopolymer and solvent types, as well as anti-solvent and surfactants used, can alter the biopolymeric nanoparticles properties. In general, these nanoparticles have been produced using polysaccharides and proteins as biopolymers, especially starch, chitosan and zein. Finally, it was identified that those biopolymers produced by anti-solvent precipitation were used to stabilize essential oils, plant extracts, pigments, and nutraceutical compounds, promoting their application in functional foods.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Ameliorating the antiparasitic activity of the multifaceted drug ivermectin through a polymer nanocapsule formulation

Ivermectin (IVM) is a potent antiparasitic widely used in human and veterinary medicine. However, the low oral bioavailability of IVM restricts its therapeutic potential in many parasitic infections, highlighting the need for novel formulation approaches. In this study, poly(ε-caprolactone) (PCL) nanocapsules containing IVM were successfully developed using the nanoprecipitation method. Pumpkin seed oil (PSO) was used as an oily core in the developed nanocapsules. Previously, PSO was chemically analyzed by headspace solid-phase microextraction coupled to gas chromatography/mass spectrometry (HS-SPME/GC-MS). The solubility of IVM in PSO was found to be 4,266.5 ± 38.6 μg/mL. In addition, the partition coefficient of IVM in PSO/water presented a logP of 2.44. A number of nanocapsule batches were produced by factorial design resulting in an optimized formulation. Negatively charged nanocapsules measuring around 400 nm demonstrated unimodal size distribution, and presented regular spherical morphology under transmission electron microscopy. High encapsulation efficiency (98-100%) was determined by HPLC. IVM-loaded capsules were found to be stable in nanosuspensions at 4°C and 25°C, with no significant variations in particle size observed over a period of 150 days. Nanoencapsulated IVM (0.3 mM) presented reduced toxicity to J774 macrophages and L929 fibroblasts compared to free IVM. Moreover, IVM-loaded nanocapsules also demonstrated enhanced in vitro anthelmintic activity against Strongyloides venezuelensis in comparison to free IVM. Collectively, the present findings demonstrate the promising potential of PCL-PSO nanocapsules to improve the antiparasitic effects exerted by IVM.

Efficiency of conventional and nanoparticle oxytetracycline in treatment of clinical endometritis in postpartum dairy cows

The incidence of clinical endometritis in dairy cows postpartum is one of the important reasons for financial losses in the dairy industry. The costs of treatment, milk losses, infertility, repeated breeding, and high annual culling rate of dairy cows present immediate losses in case of treatment failure. The commonly used therapeutic methods for clinical endometritis have not been successful nor have given definitive solutions to overcome the complications of the disease in dairy cows. Therefore, it was necessary to propose an innovative treatment program to overcome the reasons for the failure and lack of effectiveness of the treatment of clinical endometritis. This was tackled in the current study; oxytetracycline with different concentrations, oxytetracycline 5% (OTCC5%), oxytetracycline 20% (OTCC20%), and oxytetracycline 20% nanoparticles (OTC-NPs) were used for the treatment of clinical endometritis. Diagnosis of clinical endometritis was based on the assessment of high serum concentration of pro-inflammatory cytokines, acute phase protein, increased endometrium thickness, and intrauterine discharges with different degrees of echogenicity monitored by ultrasonography. Application of OTC-NPs revealed a decrease in serum concentration of pro-inflammatory cytokines (IL-1, IL-6, and TNF-α) and acute phase proteins compared to OTCC20% and OTCC5% groups. The improvement achieved by OTC-NPs may be attributed to the reduction of OTC particles into nano size which facilitates its tissue bioavailability, dispersion, penetration power to deeper tissues, and its more broad-spectrum activities. These activities were clearly apparent after the evacuation of uterine contents using a single dose of PGF2α. The OTC-NPs revealed a reduction in serum concentration of cytokines compared to OTCC20% and OTCC5% groups arranged as follows: 10.11, 25.45, 35.56 for IL-1; 99, 300, 319 for IL-6; 1.01, 4.40, 8.06 for CRP; and 46, 183, 266 for TNF-α. Furthermore, an increase in serum concentration of albumin (3.34) was obtained by OTC-NPs compared to OTCC5% (1.70). This improvement can be taken as evidence of liver resumption functions and inflammatory reactions. On the other side, globulin concentration recorded an increase like albumin and total proteins in OTC-NPs compared to others. A reduction in the endometrium thickness in OTC-NPs with the disappearance of intrauterine discharges was monitored by ultrasonography. This confirmed the subsiding of clinical endometritis in OTC-NPs group. Moreover, a significant improvement in conception and pregnancy rate in OTC-NPs compared to other groups were observed.

Chitosan nanocarriers containing essential oils as a green strategy to improve the functional properties of chitosan: A review

Large amounts of agricultural waste, especially marine product waste, are produced annually. These wastes can be used to produce compounds with high-added value. Chitosan is one such valuable product that can be obtained from crustacean wastes. Various biological activities of chitosan and its derivatives, especially antimicrobial, antioxidant, and anticancer properties, have been confirmed by many studies. The unique characteristics of chitosan, especially chitosan nanocarriers, have led to the expansion of using chitosan in various sectors, especially in biomedical sciences and food industries. On the other hand, essential oils, known as volatile and aromatic compounds of plants, have attracted the attention of researchers in recent years. Like chitosan, essential oils have various biological activities, including antimicrobial, antioxidant, and anticancer. In recent years, one of the ways to improve the biological properties of chitosan is to use essential oils encapsulated in chitosan nanocarriers. Among the various biological activities of chitosan nanocarriers containing essential oils, most studies conducted in recent years have been in the field of antimicrobial activity. It was documented that the antimicrobial activity was increased by reducing the size of chitosan particles in the nanoscale. In addition, the antimicrobial activity was intensified when essential oils were in the structure of chitosan nanoparticles. Essential oils can increase the antimicrobial activity of chitosan nanoparticles with synergistic effects. Using essential oils in the structure of chitosan nanocarriers can also improve the other biological properties (antioxidant and anticancer activities) of chitosan and increase the application fields of chitosan. Of course, using essential oils in chitosan nanocarriers for commercial use requires more studies, including stability during storage and effectiveness in real environments. This review aims to overview recent studies on the biological effects of essential oils encapsulated in chitosan nanocarriers, with notes on their biological mechanisms.

Assessment of the Oxidative Damage and Genotoxicity of Titanium Dioxide Nanoparticles and Exploring the Protective Role of Holy Basil Oil Nanoemulsions in Rats

This study was designed to evaluate the oxidative damage, genotoxicity, and DNA damage in the liver of rats treated with titanium nanoparticles (TiO2-NPs) with an average size of 28.0 nm and ξ-potential of - 33.97 mV, and to estimate the protective role of holy basil essential oil nanoemulsion (HBEON). Six groups of Male Sprague-Dawley rats were treated orally for 3 weeks as follows: the control group, HBEO or HBEON-treated groups (5 mg/kg b.w), TiO2-NPs-treated group (50 mg/kg b.w), and the groups treated with TiO2-NPs plus HBEO or HBEON. Samples of blood and tissues were collected for different analyses. The results revealed that 55 compounds were identified in HBEO, and linalool and methyl chavicol were the major compounds (53.9%, 12.63%, respectively). HBEON were semi-round with the average size and ζ-potential of 120 ± 4.5 nm and - 28 ± 1.3 mV, respectively. TiO2-NP administration increased the serum biochemical indices, oxidative stress markers, serum cytokines, DNA fragmentation, and DNA breakages; decreased the antioxidant enzymes; and induced histological alterations in the liver. Co-administration of TiO2-NPs plus HBEO or HBEON improved all the tested parameters and the liver histology, and HBEON was more effective than HBEO. Therefore, HEBON is a promising candidate able to protect against oxidative damage, disturbances in biochemical markers, gene expression, DNA damage, and histological changes resulting from exposure to TiO2-NPs and may be applicable in the food and pharmaceutical sectors.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

Yeast Particles for Encapsulation of Terpenes and Essential Oils

Terpenes and essential oils are materials of great commercial use due to their broad spectra of antibacterial, antifungal, membrane permeation enhancement and antioxidant biological properties, as well as for their use as flavors and fragrances. Yeast particles (YPs) are 3-5 µm hollow and porous microspheres, a byproduct of some food-grade yeast (Saccharomyces cerevisiae) extract manufacturing processes, that have been used for the encapsulation of terpenes and essential oils with high payload loading capacity (up to 500% weight) and efficiency, providing stability and sustained-release properties. This review focuses on encapsulation approaches for the preparation of YP-terpene and essential oil materials that have a wide range of potential agricultural, food and pharmaceutical applications.

Recent advances in mixing-induced nanoprecipitation: from creating complex nanostructures to emerging applications beyond biomedicine

Mixing-induced nanoprecipitation (MINP) is an efficient, controllable, scalable, versatile, and cost-effective technique for the preparation of nanoparticles. In addition to the formulation of drugs, MINP has attracted tremendous interest in other fields. In this review, we highlight recent advances in the preparation of nanoparticles with complex nanostructures via MINP and their emerging applications beyond biomedicine. First, the mechanisms of nanoprecipitation and four mixing approaches for MINP are briefly discussed. Next, three strategies for the preparation of nanoparticles with complex nanostructures including sequential nanoprecipitation, controlling phase separation, and incorporating inorganic nanoparticles, are summarized. Then, emerging applications including the engineering of catalytic nanomaterials, environmentally friendly photovoltaic inks, colloidal surfactants for the preparation of Pickering emulsions, and green templates for the synthesis of nanomaterials, are reviewed. Furthermore, we discuss the structure-function relationships to gain more insight into design principles for the development of functional nanoparticles via MINP. Finally, the remaining issues and future applications are discussed. This review will stimulate the development of nanoparticles with complex nanostructures and their broader applications beyond biomedicine.

Core-Shell Type Lipidic and Polymeric Nanocapsules: the Transformative Multifaceted Delivery Systems

Amongst the several nano-drug delivery systems, lipid or polymer-based core-shell nanocapsules (NCs) have garnered much attention of researchers owing to its multidisciplinary properties and wide application. NCs are structured core-shell systems in which the core is an aqueous or oily phase protecting the encapsulated drug from environmental conditions, whereas the shell can be lipidic or polymeric. The core is stabilized by surfactant/lipids/polymers, which control the release of the drug. The presence of a plethora of biocompatible lipids and polymers with the provision of amicable surface modifications makes NCs an ideal choice for precise drug delivery. In the present article, multiple lipidic and polymeric NC (LNCs and PNCs) systems are described with an emphasis on fabrication methods and characterization techniques. Far-reaching applications as a carrier or delivery system are demonstrated for oral, parenteral, nasal, and transdermal routes of administration to enhance the bioavailability of hard-to-formulate drugs and to achieve sustained and targeted delivery. This review provide in depth understanding on core-shell NC's mechanism of absorption, surface modification, size tuning, and toxicity moderation which overshadows the drawbacks of conventional approaches. Additionally, the review shines a spotlight on the current challenges associated with core-shell NCs and applications in the foreseeable future.

Protection and Disinfection Activities of Oregano and Thyme Essential Oils Encapsulated in Poly(ε-caprolactone) Nanocapsules

The biocolonization of building materials by microorganisms is one of the main causes of their degradation. Fungi and bacteria products can have an undesirable impact on human health. The protection and disinfection of sandstone and wood materials are of great interest. In this study, we evaluated the protection and disinfection activity of oregano and thyme essential oils encapsulated in poly(ε-caprolactone) nanocapsules (Or-NCs, Th-NCs) against four types of environmental microorganisms: Pleurotus eryngii, Purpureocillium lilacinum (fungal strains), Pseudomonas vancouverensis, and Flavobacterium sp. (bacterial strains). The surfaces of sandstone and whitewood samples were inoculated with these microorganisms before or after applying Or-NCs and Th-NCs. The concentration-dependent effect of Or-NCs and Th-NCs on biofilm viability was determined by the MTT reduction assay. The results showed that Or-NCs and Th-NCs possess effective disinfection and anti-biofilm activity. Diffuse reflectivity measurements revealed no visible color changes of the materials after the application of the nanoencapsulated essential oils.

Encapsulation of Thymol and Eugenol Essential Oils Using Unmodified Cellulose: Preparation and Characterization

Essential oils (EOs) are volatile natural organic compounds, which possess pesticidal properties. However, they are vulnerable to heat and light, limiting their range of applications. Encapsulation of EOs is a useful approach to overcome some of these limitations. In this study, a novel emulsification technique is utilized for encapsulation of thymol (TY) and eugenol (EU) (EOs) within microcapsules with an unmodified cellulose shell. Use of low cost materials and processes can be beneficial in agricultural applications. In the encapsulation process, unmodified cellulose was dissolved in 7% aqueous NaOH at low temperature, regenerated to form a dispersion of cellulose hydrogels, which was rigorously mixed with the EOs by mechanical mixing followed by high-pressure homogenization (HPH). Cellulose:EO ratios of 1:1 and 1:8 utilizing homogenization pressures of 5000, 10,000 and 20,000 psi applied in a microfluidizer were studied. Light microscopy, high-resolution cryogenic scanning electron microscopy (cryo-SEM) and Fourier transform infrared spectroscopy (FTIR) revealed successful fabrication of EO-loaded capsules in size range of 1 to ~8 µm. Stability analyses showed highly stabilized oil in water (O/W) emulsions with instability index close to 0. The emulsions exhibited anti-mold activity in post-harvest alfalfa plants, with potency affected by the cellulose:EO ratio as well as the EO type; TY showed the highest anti-mold activity. Taken together, this study showed potential for anti-fungal activity of cellulose-encapsulated EOs in post-harvest hay.

Biotechnological Applications of Nanoencapsulated Essential Oils: A Review

Essential oils (EOs) are complex mixtures of volatile and semi-volatile organic compounds that originate from different plant tissues, including flowers, buds, leaves and bark. According to their chemical composition, EOs have a characteristic aroma and present a wide spectrum of applications, namely in the food, agricultural, environmental, cosmetic and pharmaceutical sectors. These applications are mainly due to their biological properties. However, EOs are unstable and easily degradable if not protected from external factors such as oxidation, heat and light. Therefore, there is growing interest in the encapsulation of EOs, since polymeric nanocarriers serve as a barrier between the oil and the environment. In this context, nanoencapsulation seems to be an interesting approach as it not only prevents the exposure and degradation of EOs and their bioactive constituents by creating a physical barrier, but it also facilitates their controlled release, thus resulting in greater bioavailability and efficiency. In this review, we focused on selecting recent articles whose objective concerned the nanoencapsulation of essential oils from different plant species and highlighted their chemical constituents and their potential biotechnological applications. We also present the fundamentals of the most commonly used encapsulation methods, and the biopolymer carriers that are suitable for encapsulating EOs.

Formation and Characterization of Oregano Essential Oil Nanocapsules Applied onto Polyester Textile

Oregano essential oil was encapsulated in poly-ϵ-caprolactone nanoparticles by a nanoprecipitation method using glycerin as a moisturizer. Nanocapsule characterization was performed by measuring the particle size, colloidal stability and encapsulation efficiency using dynamic light scattering, UV-Vis spectrophotometry and scanning electron microscopy (SEM). The nanoparticles had a mean particle size of 235 nm with a monomodal distribution. In addition, a low polydispersity index was obtained, as well as a negative zeta potential of -36.3 mV and an encapsulation efficiency of 75.54%. Nanocapsules were applied to polyester textiles through bath exhaustion and foulard processing. Citric acid and a resin were applied as crosslinking agents to improve the nanocapsules' adhesion to the fabric. The adsorption, desorption, moisture content and essential oil extraction were evaluated to determine the affinity between the nanocapsules and the polyester. The adsorption was higher when the citric acid and the resin were applied. When standard oregano nanocapsules were used, almost all of the impregnated nanoparticles were removed when washed with water. The moisture content was evaluated for treated and non-treated textiles. There was a significant increase in the moisture content of the treated polyester compared to the non-treated polyester, which indicates that the polyester hydrophilicity increased with an important absorption of the essential oil nanocapsules; this can improve fabric comfort and probably promote antibacterial properties.

Pickering Emulsions as Vehicles for Bioactive Compounds from Essential Oils

Pickering emulsions are emulsion systems stabilized by solid particles at the interface of oil and water. Pickering emulsions are considered to be natural, biodegradable, and safe, so their applications in various fields-such as food, cosmetics, biomedicine, etc.-are very promising, including as a vehicle for essential oils (EOs). These oils contain volatile and aromatic compounds and have excellent properties, such as antifungal, antibacterial, antiviral, and antioxidant activities. Despite their superior properties, EOs are prone to evaporation, decompose when exposed to light and oxygen, and have low solubility, limiting their industrial applications. Several studies have shown that EOs in Pickering emulsions displays less sensitivity to evaporation and oxidation, stronger antibacterial activity, and increased solubility. In brief, the application of Pickering emulsions for EOs is interesting to explore. This review discusses recent progress in the application of Pickering emulsions, particularly as EO carriers, drug carriers, antioxidant and antimicrobial carriers, and in active packaging.

Using of Essential Oils and Plant Extracts against Pseudomonas savastanoi pv. glycinea and Curtobacterium flaccumfaciens pv. flaccumfaciens on Soybean

The bacteria Pseudomonas savastanoi pv. glycinea (Coerper, 1919; Gardan et al., 1992) (Psg) and Curtobacterium flaccumfaciens pv. flaccumfaciens (Hedges 1922) (Cff) are harmful pathogens of soybean (Glycine max). Presently, there are several strategies to control these bacteria, and the usage of environmentally friendly approaches is encouraged. In this work, purified essential oils (EOs) from 19 plant species and total aqueous and ethanolic plant extracts (PEs) from 19 plant species were tested in vitro to observe their antimicrobial activity against Psg and Cff (by agar diffusion and broth microdilution method). Tested EOs and PEs produced significant bacterial growth inhibition with technologically acceptable MIC and MBC values. Non-phytotoxic concentrations for Chinese cinnamon and Oregano essential oils and leather bergenia ethanolic extract, which previously showed the lowest MBC values, were determined. Testing of these substances with artificial infection of soybean plants has shown that the essential oils of Chinese cinnamon and oregano have the maximum efficiency against Psg and Cff. Treatment of leaves and seeds previously infected with phytopathogens with these essential oils showed that the biological effectiveness of leaf treatments was 80.6-77.5% and 86.9-54.6%, respectively, for Psg and Cff. GC-MS and GC-FID analyzes showed that the major compounds were 5-Methyl-3-methylenedihydro-2(3H)-furanone (20.32%) in leather bergenia ethanolic extract, cinnamaldehyde (84.25%) in Chinese cinnamon essential oil and carvacrol (62.32%) in oregano essential oil.

Nano-Encapsulation of Citrus Essential Oils: Methods and Applications of Interest for the Food Sector

Citrus essential oils possess many health-promoting benefits and properties of high interest in the food and agri-food sector. However, their large-scale application is limited by their sensitivity to environmental factors. Nanostructures containing citrus essential oils have been developed to overcome the high volatility and instability of essential oils with respect to temperature, pH, UV light, etc. Nanostructures could provide protection for essential oils and enhancement of their bioavailability and biocompatibility, as well as their biological properties. Nano-encapsulation is a promising method. The present review is mainly focused on methods developed so far for the nano-encapsulation of citrus essential oils, with emphasis on lipid-based (including liposomes, solid lipid nanoparticles, nanostructured lipid particles, and nano- and micro-emulsions) and polymer-based nanostructures. The physico-chemical characteristics of the obtained structures, as well as promising properties reported, with relevance for the food sector are also discussed.

Microfluidic-Based Formulation of Essential Oils-Loaded Chitosan Coated PLGA Particles Enhances Their Bioavailability and Nematocidal Activity

In this study, poly (lactic-co-glycolic) acid (PLGA) particles were synthesized and coated with chitosan. Three essential oil (EO) components (eugenol, linalool, and geraniol) were entrapped inside these PLGA particles by using the continuous flow-focusing microfluidic method and a partially water-miscible solvent mixture (dichloromethane: acetone mixture (1:10)). Encapsulation of EO components in PLGA particles was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction, with encapsulation efficiencies 95.14%, 79.68%, and 71.34% and loading capacities 8.88%, 8.38%, and 5.65% in particles entrapped with eugenol, linalool, and geraniol, respectively. The EO components’ dissociation from the loaded particles exhibited an initial burst release in the first 8 h followed by a sustained release phase at significantly slower rates from the coated particles, extending beyond 5 days. The EO components encapsulated in chitosan coated particles up to 5 μg/mL were not cytotoxic to bovine gut cell line (FFKD-1-R) and had no adverse effect on cell growth and membrane integrity compared with free EO components or uncoated particles. Chitosan coated PLGA particles loaded with combined EO components (10 µg/mL) significantly inhibited the motility of the larval stage of Haemonchus contortus and Trichostrongylus axei by 76.9%, and completely inhibited the motility of adult worms (p < 0.05). This nematocidal effect was accompanied by considerable cuticular damage in the treated worms, reflecting a synergistic effect of the combined EO components and an additive effect of chitosan. These results show that encapsulation of EO components, with a potent anthelmintic activity, in chitosan coated PLGA particles improve the bioavailability and efficacy of EO components against ovine gastrointestinal nematodes.

Combination of Poly(ε-Caprolactone) Biomaterials and Essential Oils to Achieve Anti-Bacterial and Osteo-Proliferative Properties for 3D-Scaffolds in Regenerative Medicine

Biomedical implants, an essential part of the medical treatments, still suffer from bacterial infections that hamper patients’ recovery and lives. Antibiotics are widely used to cure those infections but brought antibiotic resistance. Essential oils (EOs) demonstrate excellent antimicrobial activity and low resistance development risk. However, EO application in medicine is still quite scarce and almost no research work considers its use in combination with bioresorbable biomaterials, such as the poly(ε-caprolactone) (PCL) polymer. This work aimed to combine the antibacterial properties of EOs and their components, particularly eugenol and cinnamon oil, against Staphylococcus aureus, S. epidermidis and Escherichia coli, with those of PCL for medical applications in which good tissue regeneration and antimicrobial effects are required. The PCL porous scaffolds, added with increasing (from 30% to 50%) concentrations of eugenol and cinnamon oil, were characterized by square-shaped macropores. Saos-2 cells’ cell viability/proliferation was hampered by 40 and 50% EO-enriched PCL, whereas no cytotoxic effect was recorded for both 30% EO-added PCL and pure-PCL. The antibacterial tests revealed the presence of a small inhibition halo around the 30% eugenol and cinnamon oil-functionalized PCL scaffolds only for staphylococci, whereas a significant decrease on both adherent and planktonic bacteria was recorded for all the three microorganisms, thus proving that, even if the EOs are only in part released by the EO-added PCL scaffolds, an anti-adhesive feature is anyway achieved. The scaffold will have the ability to support new tissue formation and simultaneously will be able to prevent post-surgical infection. This research shows the great potential in the use of EOs or their single components, at low concentrations, for biomaterial functionalization with enhanced anti-bacterial and biointegration properties.

Antimicrobial potential of probiotic cell-free and Carum copticum L. seed extracts co-nanoencapsulated in cellulose acetate fibers

The aim of this work was to co-nanoencapsulate Lactobacillus acidophilus (LCFE) and Bifidobacterium bifidum (BCFE) cell-free extract and zenyan (Carum copticum L.) seed water (ZWE) and ethanolic (ZEE) extract in electrospun cellulose acetate (CA) nanofibers and evaluate antimicrobial potential. The zeta potential, SEM image, antibacterial (MIC and MBC), and antifungal (MIC and MFC) activities were evaluated. TPC (total phenol content) of water and ethanol extract of zenyan seed were 14.05 and 136.44 mg GAE/g, respectively. A zeta potential of -40.25, -45.80, -43.71, 48.55, 35.50, 47.93, 31.50, 44.69, and -29.61 mV was found for nanofibers of pure CA (cellulose acetate), CA/LCFE, CA/BCFE, CA/ZWE, CA/ZEE, CA/LCFE/ZWE, CA/LCFE/ZEE, CA/BCFE/ZWE, and CA/LCFE/ZEE, respectively. CA electrospun nanofiber loaded with different extracts showed nanosized diameter and uniform structure. Nanoencapsulated extracts showed considerably higher antibacterial and antifungal activity compared to free extracts. Antibacterial activity of lactobacilli cell-free extract was higher than bifidobacteria, which indicated the presence of the higher amount of antibacterial compounds in lactobacilli extract. Gram-positive bacteria (S. aureus and L. monocytogenes) had the lowest MIC and MBC of free and nanoencapsulated extracts while Gram-negatives (E. coli, S. dysenteriae, and S. enteritidis) had higher MIC and MBC. CA-coated zenyan extracts (water and ethanolic) inhibited the growth of the assayed fungi at the MIC ranging 0.25 to 0.95%. These concentrations were 1.5-2 times lower than those obtained for pure extracts. For nanoencapsulated cell-free extracts of both probiotics, the MIC values were about five times lower than the free extracts. The highest antimicrobial activity obtained for CA nanofibers contained zenyan ethanolic extract and cell-free extract of lactobacilli or bifidobacteria.

Spray drying encapsulation of essential oils; process efficiency, formulation strategies, and applications

Essential oils (EOs) have many beneficial qualities, including antimicrobial, antioxidant, antiviral, and antifungal activities, along with good aroma, which have played a significant role in pharmaceutical, textile, and food industries. However, their high volatility and sensibility to external factors, as well as susceptibility to deterioration caused by environmental and storage conditions, or even common processing, and consequently limited water solubility, makes it difficult to incorporate them into aqueous food matrices and limits their industrial application. Spray-drying encapsulation has been proposed as a solution and a challenging research field to retard oil oxidation, extend EO's shelf life, improve their physicochemical stability, achieve controlled release, suggest novel uses, and therefore boost their added value. The objective of this review is to discuss various used wall materials, infeed emulsion properties, the main formulation and process variables affecting the physicochemical properties and release characteristics of the EOs-loaded particles obtained by spray-drying, the stability of EOs during storage, and the applications of encapsulated EOs powders in foods and nutrition, pharmaceuticals, and textile industries. The current review also summarizes recent advances in spray drying approaches for improving encapsulation efficiency, flavor retention, controlled release, and applicability of encapsulated EOs, thereby expanding their use and functionalities.

Nanotechnology Advances in the Detection and Treatment of Cancer: An Overview

Over the last few years, progress has been made across the nanomedicine landscape, in particular, the invention of contemporary nanostructures for cancer diagnosis and overcoming complexities in the clinical treatment of cancerous tissues. Thanks to their small diameter and large surface-to-volume proportions, nanomaterials have special physicochemical properties that empower them to bind, absorb and transport high-efficiency substances, such as small molecular drugs, DNA, proteins, RNAs, and probes. They also have excellent durability, high carrier potential, the ability to integrate both hydrophobic and hydrophilic compounds, and compatibility with various transport routes, making them especially appealing over a wide range of oncology fields. This is also due to their configurable scale, structure, and surface properties. This review paper discusses how nanostructures can function as therapeutic vectors to enhance the therapeutic value of molecules; how nanomaterials can be used as medicinal products in gene therapy, photodynamics, and thermal treatment; and finally, the application of nanomaterials in the form of molecular imaging agents to diagnose and map tumor growth.