Formulation and Optimization of Butenafine-Loaded Topical Nano Lipid Carrier-Based Gel: Characterization, Irritation Study, and Anti-Fungal Activity

Anti-ageing Potential of Metformin Loaded Fennel Oil-Based Nanoemulgel: A Promising Novel Approach for Ultraviolet B-Induced Ageing

BACKGROUND

Ageing produces structural alteration of skin tissue when exposed to UV radiation, pollution and smoking, resulting in functional decline and mortality of the cells. The proposed study aimed at developing a commercially scalable fennel oil (FO) based metformin-loaded nanoemulsion (MTF-NE) incorporated in the hydrogel (MTF-HYD-NEG) providing anti-ageing effect.

METHODOLOGY

The scalable development of phytocompound incorporated nanoemulsion was done using a multi-step process involving excipient screening, optimization of nanoemulsion and thermodynamic stability assessment. The MTF-NE was developed using aqueous titration method containing Tween 80 as the surfactant and Transcutol P as the co-surfactant. The optimized nanoemulsion was incorporated into a hydrogel to form MTF-HYD-NEG. The formulation was characterized based on globule size, polydispersity index (PDI), zeta potential, spreadability, viscosity, and permeability. In vitro drug release and ex vivo permeation studies were conducted to assess sustained drug release. Confocal laser scanning microscopy (CLSM) was used to evaluate skin penetration. The in vivo studies were conducted using UV-B radiation induced mice models and old mice models to assess the anti-ageing efficacy through histopathological analysis, immunohistochemistry (MMP-1 expression), and biochemical assays (GSH, SOD, CAT, and MDA levels).

RESULT AND DISCUSSION

The characterization of the optimized MTF-NE exhibited a monodispersed pattern with an average globule size of 261.1 nm, PDI of 0.1305 and zeta potential of -4.4 mV. The MTF-NE was then converted into a hydrogel. The permeability of the MTF-HYD-NEG was assessed by in vitro release and ex vivo permeation studies that demonstrated a sustained release effect of Metformin (MTF) with the value of 71.565 ± 4.995 % over 24 hours and 4.503 ± 2.669 mg/cm2 over 8 hours of study. Additionally, the release profile was further validated by the confocal microscopy through the mice's skin tissue. The mean intensity was observed to be 53.472 which was retained at 4.472 at 50 µm depth of permeation demonstrating the better penetration of the nanocarrier. The data displayed by histopathology and MMP-1 expression by immunohistochemistry showed recuperation in the dermal tissue of the mice model seen in the post-treatment group of MTF-HYD-NEG in comparison to the control group and conventional treatment groups and depletion in MMP-1 production, improved dermal collagen and diminished wrinkles.

CONCLUSION

The results of the MTF-HYD-NEG formulation displayed enhanced permeability with a prolonged effect, depicting a reduction in MMP-1 expression, which could serve as a promising anti-ageing and antioxidant preparation attributed to the presence of a fennel oil base.

Dual-action of clotrimazole loaded - nanosponges vaginal gel for spermicidal action and treatment of vaginal candidiasis: Optimization, in-vitro, ex-vivo, and in-vivo experiments

Clotrimazole (CLO) is a strong antifungal drug approved to treat vaginal candidiasis (VC). Nanosponges (NSs) were developed to maintain providing CLO in a steady pattern with amplified accumulation in the vaginal mucosa. The quasi-emulsion solvent diffusion method was utilized to prepare NSs. The optimized NSs selected by Design Expert® exhibited a production yield percent (PY%) of 60.10 ± 0.39 %, encapsulation efficiency percent (EE%) of 91.21 ± 0.59 %, particle size (PS) 275.50 ± 0.97 nm, polydispersity index (PDI) 0.425 ± 0.01, and zeta potential (ZP) of -27.40 ± 0.25 mV. The morphological results confirmed a spongy, porous structure. Fourier Transform Infrared Spectroscopy ensured the drug encapsulation. Differential scanning calorimetric studies showed no interaction between the excipients and CLO. The prepared NSs-loaded gel of optimized CLO-NSs was evaluated, the mucoadhesive strength (6065.85 ± 52.03 dyne/cm2) with spermicidal activity of (0 % sperm motility/60 s). The ex-vivo deposition depicted significantly increased vaginal retention of CLO by 2.44-fold compared to Candistan® 2 % vaginal cream (the market product). Finally, the in-vivo study on rats demonstrated thesuperior efficacy of CLO-NSs gel relative to Candestan®, with significantly reduced inflammatory biomarkers and minimal histopathological alterations in the treatment of vaginal candidiasis with a high safety profile.

Preparation and characterisation of esculetin-loaded nanostructured lipid carriers gels for topical treatment of UV-induced psoriasis

SIGNIFICANCE

As an inflammatory and autoimmune skin condition, psoriasis affects 2-3% of people worldwide. Psoriasis requires prolonged treatments with immunosuppressive medications which have severe adverse effects. Esculetin (Esc) is a natural medication that has been utilised to treat psoriasis.

OBJECTIVE

The goal of this work is to improve Esc's solubility by developing novel Esc nanostructured lipid carriers (NLCs) for treating psoriasis and increasing the residence time on the skin which infers better skin absorption.

METHODS

The particle size, zeta potential and entrapment efficiency (EE) of Esc NLCs were assessed. Incorporating NLCs into gum Arabic gel preparation enhances their industrial applicability, absorption and residence time on the skin. Esc NLC gels were evaluated by in vitro release and in vivo effectiveness on a rat model of UV-induced psoriasis.

RESULTS

Esc NLCs showed high EE reaching more than 95% and reasonable particle size ranging between (53.86 ± 0.38 to 236.3 ± 0.11 nm) and were spherical. The release study of Esc NLCs gel demonstrated a fast release of Esc denoting enhanced bioavailability. Compared to free Esc, Esc NLCs gel (F2) could considerably lower the level of CD34 and TNF-α in the skin. The results were validated through histopathological analysis.

CONCLUSION

As Esc NLCs gel (F2) has strong anti-inflammatory properties, our results showed that it presented a significant potential for healing psoriasis.

Magnetic targeting of lornoxicam/SPION bilosomes loaded in a thermosensitive in situ hydrogel system for the management of osteoarthritis: Optimization, in vitro, ex vivo, and in vivo studies in rat model via modulation of RANKL/OPG

Osteoarthritis is a bone and joint condition characterized pathologically by articular cartilage degenerative damage and can develop into a devastating and permanently disabling disorder. This investigation aimed to formulate the anti-inflammatory drug lornoxicam (LOR) into bile salt-enriched vesicles loaded in an in situ forming hydrogel as a potential local treatment of osteoarthritis. This was achieved by formulating LOR-loaded bilosomes that are also loaded with superparamagnetic iron oxide nanoparticles (SPIONs) for intra-muscular (IM) administration to improve joint targeting and localization by applying an external magnet to the joint. A 31.22 full factorial design was employed to develop the bilosomal dispersions and the optimized formula including SPION (LSB) was loaded into a thermosensitive hydrogel. Moreover, in vivo evaluation revealed that the IM administration of LSB combined with the application of an external magnet to the joint reversed carrageen-induced suppression in motor activity and osteoprotegerin by significantly reducing the elevations in mitogen-activated protein kinases, extracellular signal-regulated kinase, and receptor activator of nuclear factor kappa beta/osteoprotegerin expressions. In addition, the histopathological evaluation of knee joint tissues showed a remarkable improvement in the injured joint tissues. The results proved that the developed LSB could be a promising IM drug delivery system for osteoarthritis management.

Novel nanomicelle butenafine formulation for ocular drug delivery against fungal keratitis: In Vitro and In Vivo study

Fungal keratitis (FK) is a serious infectious corneal disease that leads to blindness. Butenafine (BTF) is an allylamine drug with high antifungal activity, but its poor water solubility and low bioavailability limit its clinical application in ophthalmology. To increase its aqueous solubility and corneal permeability, butenafine was encapsulated in d-ɑ-tocopheryl polyethylene glycol succinate (TPGS) polymeric nanomicelles to improve the bioavailability of the drug for the treatment of FK. Butenafine was successfully fabricated into nanomicelles with a high EE of 96.34 ± 1.65 % and DL of 6.71 ± 0.099 %. The BTF-NM showed an average particle size of 13.12 ± 0.24 nm, a zeta potential of -0.56 ± 0.44 mV and a narrow PDI of 0.12 ± 0.02 with a nearly spherical shape. The characterization results of FTIR, XRD and DSC indicated that BTF was encapsulated in the TPGS nanomicelles. The BTF-NM formulation also showed high storage stability, and the in vitro drug release study showed typical biphasic-release characteristics. In addition, the BTF-NM formulation displayed good cellular tolerance and excellent ocular tolerance in rabbits. Significantly elevated in vitro antifungal activity was also observed in the BTF-NM formulation, and remarkable improvements regarding in vivo corneal permeation were observed compared with the BTF suspension formulation. Finally, the in vivo antifungal activity studies indicated that the BTF-NM formulation had a good therapeutic effect on FK and had similar efficacy to that of commercial natamycin suspension eye drops. These results suggest that the BTF-NM ophthalmic formulation could be a promising ocular drug delivery system for the treatment of FK.

Nanotechnology-based fungal detection and treatment: current status and future perspective

Fungal infections impose a significant impact on global health and encompass major expenditures in medical treatments. Human mycoses, a fungal co-infection associated with SARS-CoV-2, is caused by opportunistic fungal pathogens and is often overlooked or misdiagnosed. Recently, there is increasing threat about spread of antimicrobial resistance in fungus, mostly in hospitals and other healthcare facilities. The diagnosis and treatment of fungal infections are associated with several issues, including tedious and non-selective detection methods, the growth of drug-resistant bacteria, severe side effects, and ineffective drug delivery. Thus, a rapid and sensitive diagnostic method and a high-efficacy and low-toxicity therapeutic approach are needed. Nanomedicine has emerged as a viable option for overcoming these limitations. Due to the unique physicochemical and optical properties of nanomaterials and newer biosensing techniques, nanodiagnostics play an important role in the accurate and prompt differentiation and detection of fungal diseases. Additionally, nano-based drug delivery techniques can increase drug permeability, reduce adverse effects, and extend systemic circulation time and drug half-life. This review paper is aimed at highlighting recent, promising, and unique trends in nanotechnology to design and develop diagnostics and treatment methods for fungal diseases.

Enhanced drug delivery and wound healing potential of berberine-loaded chitosan-alginate nanocomposite gel: characterization and in vivo assessment

Berberine-encapsulated polyelectrolyte nanocomposite (BR-PolyET-NC) gel was developed as a long-acting improved wound healing therapy. BR-PolyET-NC was developed using an ionic gelation/complexation method and thereafter loaded into Carbopol gel. Formulation was optimized using Design-Expert® software implementing a three-level, three-factor Box Behnken design (BBD). The concentrations of polymers, namely, chitosan and alginate, and calcium chloride were investigated based on particle size and %EE. Moreover, formulation characterized in vitro for biopharmaceutical performances and their wound healing potency was evaluated in vivo in adult BALB/c mice. The particle distribution analysis showed a nanocomposite size of 71 ± 3.5 nm, polydispersity index (PDI) of 0.45, ζ-potential of +22 mV, BR entrapment of 91 ± 1.6%, and loading efficiency of 12.5 ± 0.91%. Percentage drug release was recorded as 89.50 ± 6.9% with pH 6.8, thereby simulating the wound microenvironment. The in vitro investigation of the nanocomposite gel revealed uniform consistency, well spreadability, and extrudability, which are ideal for topical wound use. The analytical estimation executed using FT-IR, DSC, and X-ray diffraction (XRD) indicated successful formulation with no drug excipients and without the amorphous state. The colony count of microbes was greatly reduced in the BR-PolyET-NC treated group on the 15th day from up to 6 CFU compared to 20 CFU observed in the BR gel treated group. The numbers of monocytes and lymphocytes counts were significantly reduced following healing progression, which reached to a peak level and vanished on the 15th day. The observed experimental characterization and in vivo study indicated the effectiveness of the developed BR-PolyET-NC gel toward wound closure and healing process, and it was found that >99% of the wound closed by 15th day, stimulated via various anti-inflammatory and angiogenic factors.

Microemulsions, nanoemulsions and emulgels as carriers for antifungal antibiotics

According to estimates, up to 25% of the world's population has fungal skin diseases, making them the most prevalent infectious disease. Several chemical classes of antifungal drugs are available to treat fungal infections. However, the major challenges of conventional formulations of antifungal drugs include poor pharmacokinetic profiles like solubility, low permeability, side effects and decreased efficacy. Novel drug delivery is a promising approach for overcoming pharmacokinetic limitations and increasing the effectiveness of antibiotics. In this review, we have shed light on microemulsions, nanoemulsions, and emulgels as novel drug delivery approaches for the topical delivery of antifungal antibiotics. We believe these formulations have potential translational value and could be developed for treating fungal infections in humans.

A Gellan Gum/Sodium Alginate-based gastric-protective hydrogel loaded with a combined herbal extract consisting of Panax notoginseng, Bletilla striata and Dendrobium officinale

One Chinese herbal combination consisting of Panax notoginseng, Bletilla striata and Dendrobium officinale (PBD) is an effective Traditional Chinese Medicine (TCM) prescription and is widely used in clinics to treat gastric ulcers due to their safety and effectiveness compared with chemical agents, such as aspirin and omeprazole. Herein, an in situ forming gel (ISFG) based on Gellan Gum (GG) and Sodium Alginate (SA) was designed to deliver extracts of PBD prescription (EPBDP). The central composite design optimized prescription dosage was 0.1 % w/v of GG and 0.5 % w/v of SA. Gels prepared with this formulation demonstrated outstanding fluidity and instantaneous gel formation. In vitro release data showed that sustained drug release occurred in the gel, and the gel was pH-sensitive. The rheological tests confirmed the formation of stable gel, which exhibited strong viscosity and elasticity. In vitro adhesion assays revealed that the gel had strong gastric mucosal adhesion, while in vivo residual rate experiments of active ingredients revealed that the gel might greatly improve the gastric retention of active ingredients. Animal studies demonstrated that the gel was effective in treating gastric ulcers. Hence, the results of the study show that EPBDP-ISFG, a highly pH-sensitive sustained-release system, is effective.

Current Advances in Lipid Nanosystems Intended for Topical and Transdermal Drug Delivery Applications

Skin delivery is an exciting and challenging field. It is a promising approach for effective drug delivery due to its ease of administration, ease of handling, high flexibility, controlled release, prolonged therapeutic effect, adaptability, and many other advantages. The main associated challenge, however, is low skin permeability. The skin is a healthy barrier that serves as the body's primary defence mechanism against foreign particles. New advances in skin delivery (both topical and transdermal) depend on overcoming the challenges associated with drug molecule permeation and skin irritation. These limitations can be overcome by employing new approaches such as lipid nanosystems. Due to their advantages (such as easy scaling, low cost, and remarkable stability) these systems have attracted interest from the scientific community. However, for a successful formulation, several factors including particle size, surface charge, components, etc. have to be understood and controlled. This review provided a brief overview of the structure of the skin as well as the different pathways of nanoparticle penetration. In addition, the main factors influencing the penetration of nanoparticles have been highlighted. Applications of lipid nanosystems for dermal and transdermal delivery, as well as regulatory aspects, were critically discussed.

Quality by Design Assisted Optimization and Risk Assessment of Black Cohosh Loaded Ethosomal Gel for Menopause: Investigating Different Formulation and Process Variables

Black cohosh (Cimicifuga racemosa) (CR) is a popular herb and is medically lauded for ameliorating myriad symptoms associated with menopause. However, its pharmaceutical limitations and non-availability of a patient-compliant drug delivery approach have precluded its prevalent use. Henceforth, the current research premise is aimed at developing an ethosomal gel incorporating triterpene enriched fraction (TEF) obtained from CR and evaluating its effectiveness through the transdermal application. TEF-loaded ethosomes were formulated using solvent injection, optimized and characterised. The optimized ethosomes were then dispersed into a polymeric gel base to form ethosomal gel which was further compared with the conventional gel by in-vitro and ex-vivo experiments. Here, the quality by design (QbD) approach was exploited for the optimization and development of ethosomal gel. The elements of QbD comprising initial risk assessment, design of experimentation (DoE), and model validation for the development of formulation have all been described in detail. The optimized ethosomes (F03) showed a nanometric size range, negative zeta potential and good entrapment. The in vitro release profile of gel revealed a burst release pattern following the Korsmeyer Peppas model having Fickian diffusion. The transdermal flux of ethosomal gel was observed to be more than that of conventional gel. Texture analysis and rheological characterization of the gel, revealed good strength showing shear thinning and pseudoplastic behaviour. The confocal microscope investigation revealed the deeper skin permeation of ethosomal gel than conventional gel. This result was further strengthened by DSC, IR and histological assessment of the animal skin (Wistar rat), treated with the optimized formulation. Conclusively, the implementation of QbD in the formulation resulted in a better understanding of the process and the product. It aids in the reduction of product variability and defects, hence improving product development efficiencies. Additionally, the ethosomal gel was found to be a more effective and successful carrier for TEF than the conventional gel through the transdermal route. Moreover, this demands an appropriate animal study, which is underway, for a stronger outcome.

Sensitive and effective electrochemical determination of butenafine in the presence of itraconazole using titanium nanoparticles-ionic liquid based nanocomposite sensor

The evaluation of the bioavailability of topically applied medications that act inside or under the skin is a challenging task. Herein, the current study describes a simple, quick, and low-cost electrochemical platform for determining butenafine hydrochloride (BTH) that is mainly prescribed as a treatment of dermatophytosis, applying titanium nanoparticles and an ionic liquid as outstanding mediators. In terms of low detection limits (61.63 nM) and extensive range of 2.21 × 10^-7-13.46 × 10^-5 M, the established electrochemical technique provided worthy analytical performance for butenafine hydrochloride sensing. The suggested sensor's practical applicability was effectively demonstrated in pharmaceutical preparations, actual stratum corneum samples, and simultaneous detection of butenafine hydrochloride and Itraconazole in pharmaceutical preparation for the first time. All of the experimental factors, like the pH and scan rate, have been investigated and optimized. Diffusion coefficients of butenafine hydrochloride at bare and modified sensors were calculated.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11696-022-02593-3.

Editorial on Special Issue "Pharmaceutical Formulations with Antimicrobial Properties"

Even though numerous studies on the systemic administration of antimicrobial drugs can be found in the literature, they still have many shortcomings related to the site-specific drug delivery, unwanted side effects and even potential toxicity [...].

Compritol-Based Nanostrucutured Lipid Carriers (NLCs) for Augmentation of Zolmitriptan Bioavailability via the Transdermal Route: In Vitro Optimization, Ex Vivo Permeation, In Vivo Pharmacokinetic Study

Migraine is a severe neurovascular disease manifested mainly as unilateral throbbing headaches. Triptans are agonists for serotonin receptors. Zolmitriptan (ZMP) is a biopharmaceutics classification system (BCS) class III medication with an absolute oral bioavailability of less than 40%. As a result, our research intended to increase ZMP bioavailability by developing transdermal nanostructured lipid carriers (NLCs). NLCs were prepared utilizing a combination of hot melt emulsification and high-speed stirring in a 3² full factorial design. The studied variables were liquid lipid type (X₁) and surfactant type (X₂). The developed NLCs were evaluated in terms of particle size (Y₁, nm), polydispersity index (Y₂, PDI), zeta potential (Y₃, mV), entrapment efficacy (Y₄, %) and amount released after 6 h (Q6h, Y₅, %). At 1% Mygliol as liquid lipid component and 1% Span 20 as surfactant, the optimized formula (NLC9) showed a minimum particle size (138 ± 7.07 nm), minimum polydispersity index (0.39 ± 0.001), acceptable zeta potential (−22.1 ± 0.80), maximum entrapment efficiency (73 ± 0.10%) and maximum amount released after 6 h (83.22 ± 0.10%). The optimized formula was then incorporated into gel preparation (HPMC) to improve the system stability and ease of application. Then, the pharmacokinetic study was conducted on rabbits in a cross-over design. The calculated parameters showed a higher area under the curve (AUC_0–24, AUC_0–∞ (ng·h/mL)) of the developed ZMP-NLCs loaded gel, with a 1.76-fold increase in bioavailability in comparison to the orally administered marketed product (Zomig^®). A histopathological examination revealed the safety of the developed nanoparticles. The declared results highlight the potential of utilizing the proposed NLCs for the transdermal delivery of ZMP to improve the drug bioavailability.

Formulation and Evaluation of Topical Nano-Lipid-Based Delivery of Butenafine: In Vitro Characterization and Antifungal Activity

The present research work was designed to prepare butenafine (BN)-loaded bilosomes (BSs) by the thin-film hydration method. BN is a sparingly water-soluble drug having low permeability and bioavailability. BSs are lipid-based nanovesicles used to entrap water-insoluble drugs for enhanced permeation across the skin. BSs were prepared by the thin-film hydration method and optimized by the Box-Behnken design (BBD) using lipid (A), span 60 (B), and sodium deoxycholate (C) as independent variables. The selected formulation (BN-BSo) was converted into the gel using Carbopol 940 as a gelling agent. The prepared optimized gel (BN-BS-og) was further evaluated for the gel characterization, drug release, drug permeation, irritation, and anti-fungal study. The optimized bilosomes (BN-BSo) showed a mean vesicle size of 215 ± 6.5 nm and an entrapment efficiency of 89.2 ± 1.5%. The DSC study showed that BN was completely encapsulated in the BS lipid matrix. BN-BSog showed good viscosity, consistency, spreadability, and pH. A significantly (p < 0.05) high release (81.09 ± 4.01%) was achieved from BN-BSo compared to BN-BSog (65.85 ± 4.87%) and pure BN (17.54 ± 1.37 %). The permeation study results revealed that BN-BSo, BN-BSog, and pure BN exhibited 56.2 ± 2.7%, 39.2 ± 2.9%, and 16.6 ± 2.3%. The enhancement ratio of permeation flux was found to be 1.4-fold and 3.4-fold for the BN-BS-og and pure BN dispersion. The HET-CAM study showed that BN-BSog was found to be nonirritant as the score was found within the limit. The antifungal study revealed a significant (p < 0.05) enhanced antifungal activity against C. albicans and A. niger. The findings of the study revealed that BS is an important drug delivery system for transdermal delivery.

Formulation and evaluation of butenafine loaded PLGA-nanoparticulate laden chitosan nano gel

The present research work is designed to prepare and optimize butenafine (BT) loaded poly lactic co glycolic acid (PLGA) nanoparticles (BT-NPs). BT-NPs were prepared by emulsification probe sonication method using PLGA (A), PVA (B) as polymer and stabilizer, respectively. The optimum composition of BT-NPs was selected based on the point prediction method given by the Box Behnken design software. The optimized composition of BT-NPop showed a particle size of 267.21 ± 3.54 nm with an entrapment efficiency of 72.43 ± 3.11%. The optimum composition of BT-NPop was further converted into gel formulation using chitosan as a natural polymer. The prepared topical gel formulation (BT-NPopG) was further evaluated for gel characterization, drug release, permeation study, irritation, and antifungal studies. The prepared BT-NPopG formulation showed optimum pH, viscosity, spreadability, and drug content. The release and permeation study results revealed slow BT release (42.76 ± 2.87%) with significantly enhanced permeation across the egg membrane. The irritation study data showed negligible irritation with a cumulative score of 0.33. The antifungal study results conclude higher activity than marketed as well as pure BT. The overall conclusion of the results revealed BT-NPopG as an ideal delivery system to treat topical fungal infection.