Wound Healing Efficacy of Rosuvastatin Transethosomal Gel, I Optimal Optimization, Histological and In Vivo Evaluation

Type I and type III collagen immunoexpression in rabbit skin biopsy samples treated with rosuvastatin gel and autologous platelet-rich plasma

PURPOSE

To evaluate whether the joint use of autologous platelet-rich plasma (aPRP) and rosuvastatin (RSV) in biopsies of dermal wounds induced in rabbits results in an additive effect on the immunoexpression of collagens type I and III, optimizing the healing process and increasing collagen production during the proliferative phase of healing to improve the quality of tissue repair.

METHODS

Thirty-two biopsy samples from eight clinically healthy adult male New Zealand rabbits were used. They were treated with aPRP, RSV, or aPRP + RSV and analyzed zero, three, seven, ten, and 14 days post wound induction.

RESULTS

Type I collagen immunoexpression was significantly higher in wounds treated with aPRP when compared to the control group. This study demonstrated that type III collagen is predominant during the proliferation phase of the healing process, highlighting its critical role in tissue repair and regeneration.

CONCLUSION

The association of aPRP and RSV in wound treatment may have an additive effect in the immunoexpression of type III collagen and can thus be used as an alternative in tissue repair and collagen formation, optimizing the healing process.

5-Fluorouracil- and Sesamol-Loaded Transliposomal Gel for Skin Cancer: In Vitro, Ex Vivo, and Dermatokinetic Evaluation

This study explores a novel approach to managing skin conditions through a combination therapy utilizing a phospholipid-enriched edge activator-based nanoformulation. 5-Fluorouracil (5-FU)- and sesamol (SES)-loaded transliposomes (FS-TL) were developed using a thin film hydration method and optimized using Box-Behnken Design. FS-TL characterization indicated a vesicle size of 165.6 ± 1.1 nm, polydispersity index of 0.28 ± 0.01, and a zeta potential of -33.17 ± 0.9 mV, and the percent entrapment efficiencies for 5-FU and SES were found to be 63.16 ± 1.07% and 75.60 ± 3.68%, respectively. The drug loading percents for 5-FU and SES were found to be 5.87 ± 0.099% and 7.03 ± 0.34%, respectively. The morphological studies exhibit the distinctive spherical shape of the nanoformulation. The in vitro drug release demonstrated sustained release with 82.52 ± 1.2% and 86.28 ± 1.3% releases for 5-FU and SES, respectively. The ex vivo skin permeation exhibited 81.04 ± 2.1% and 78.03 ± 1.7% for 5-FU and SES. Confocal laser microscopy scanning (CLSM) revealed a deeper formulation penetration (30.0 μm) of excised mice skin membranes than for a standard rhodamine solution (10.0 μm). The dermatokinetic investigation revealed that FS-TL gel has significantly higher concentrations of 5-FU and SES (p < 0.001). The efficacy of FS-TL (p < 0.05) in eradicating the A431 melanoma cell line was satisfactory. These findings suggest the potential of FS-TL formulation over conventional approaches in skin cancer management.

Transethosomes: A Comprehensive Review of Ultra-Deformable Vesicular Systems for Enhanced Transdermal Drug Delivery

The transdermal route is one of the effective routes for delivering drugs. It also overcomes many limitations associated with oral delivery. One of the limitations of this route is the drug's poor skin permeability-stratum corneum, the skin's outermost layer that also acts as a barrier for the drug to penetrate. Traditional liposomal formulation is utilized to overcome these limitations. However, these liposomes also have certain difficulty in delivering drugs across the barriers. Ultra-deformable vesicles are novel vesicular structures that are flexible and stable, they can easily bypass the skin barriers more efficiently and thus enhance bioavailability. These vesicles consist of ethosomes, transethosomes, and transferosomes. Transethosomes are more advanced than other vesicular systems because they contain ethanol, phospholipids, and edge activators, making them more deformable and easier to penetrate deeper skin membranes. These vesicular systems can be prepared by various methods, such as cold, hot, and thin film hydration. Characterization of transethosomes includes vesicular size, zeta potential, polydispersity index and encapsulation efficiency, stability, and drug release studies. These vesicular systems can be utilized to deliver a variety of medications transdermally, including analgesics, antibiotics, and arthritis medications. Despite their promising potential, ethanol-based formulations present several problems requiring additional study. This review aims to describe various vesicular structures that have been used to overcome the barrier for the transdermal delivery of drugs and also describe brief composition, method of preparation, characterization, mechanism of penetration of transethosomes, as well as highlighted various applications of transethosomes in medicine, clinical trials and patents.

Ocular mucoadhesive and biodegradable spanlastics loaded cationic spongy insert for enhancing and sustaining the anti-inflammatory effect of prednisolone Na phosphate; Preparation, I-optimal optimization, and In-vivo evaluation

This study aimed to formulate and statistically optimize spanlastics loaded spongy insert (SPLs-SI) of prednisolone Na phosphate (PRED) to enhance and sustain its anti-inflammatory effect in a controlled manner. An I-optimal optimization was employed using Design-Expert® software. The formulation variables were sonication time, the Span 60: EA ratio and type of edge activator (Tween 80 or PVA) while Entrapment efficiency (EE%), Vesicles' size (VS) and Zeta potential (ZP) were set as the dependent responses. This resulted in an optimum spanlastics (SPLs) formulation with a desirability of 0.919. It had a Span60:Tween80 ratio of 6:1 with a sonication time of 9.5 min. It was evaluated in terms of its EE%, VS, ZP, release behavior in comparison to drug solution in addition to the effect of aging on its characteristics. It had EE% of 87.56, VS of 152.2 nm and ZP of -37.38 Mv. It showed sustained release behavior of PRED in comparison to drug solution with good stability for thirty days. TEM images of the optimized PRED SPLs formulation showed spherical non-aggregated nanovesicles. Then it was loaded into chitosan spongy insert and evaluated in terms of its visual appearance, pH and mucoadhesion properties. It showed good mucoadhesive properties and pH in the safe ocular region. The FTIR, DSC and XRD spectra showed that PRED was successfully entrapped inside the SPLs vesicles. It was then exposed to an in-vivo studies where it was capable of enhancing the anti-inflammatory effect of PRED in a sustained manner with once daily application compared to commercial PRED solution. The spongy insert has the potential to be a promising carrier for the ocular delivery of PRED.

Ethosomes as a carrier for transdermal drug delivery system: methodology and recent developments

Transdermal drug delivery systems (TDDS) have received significant attention in recent years. TDDS are flexible systems that transport active components to the skin for either localized or systemic delivery of drugs through the skin. Among the three main layers of skin, the outermost layer, called the stratum corneum (SC), prevents the entry of water-loving bacteria and drugs with a high molecular weight. The challenge lies in successfully delivering drugs through the skin, which crosses the stratum corneum. The popularity of lipid-based vesicular delivery systems has increased in recent years due to their ability to deliver both hydrophilic and hydrophobic drugs. Ethosomes are specialized vesicles made of phospholipids that can store large amounts of ethanol. Ethosome structure and substance promote skin permeability and bioavailability. This article covers ethosome compositions, types, medication delivery techniques, stability, and safety. In addition to this, an in-depth analysis of the employment of ethosomes in drug delivery applications for a wide range of diseases has also been discussed. This review article highlights different aspects of ethosomes, such as their synthesis, characterization, marketed formulation, recent advancements in TDDS, and applications.

Development and Evaluation of Nano-Vesicular Emulsion-Based Gel as a Promising Approach for Dermal Atorvastatin Delivery Against Inflammation

Introduction

Atorvastatin (ATV), a medication used to reduce cholesterol levels, possesses properties that can counteract the damaging effects of free radicals and reduce inflammation. However, the administration of ATV orally is associated with low systemic bioavailability due to its limited capacity to dissolve in water and significant first-pass effect. This study aimed to assess the appropriateness of employing nano-vesicles for transdermal administration of ATV in order to enhance its anti-inflammatory effects.

Methods

ATV-loaded transethosomes (ATV-TEs) were optimized using the 33 Box-Behnken design. The ATV-TEs that were created were evaluated for their vesicle size, encapsulation efficiency (% EE), and percent release of drug. The optimum formulation was integrated into a hydroxypropyl methylcellulose (HPMC) emulsion-based gel (ATV-TEs emulgel) using jojoba oil. ATV-TEs emulgel was examined for its physical characteristics, ex vivo permeability, histological, and anti-inflammatory effect in a rat model of inflamed paw edema.

Results

The optimized transethosomes exhibited a vesicle size of 158.00 nm and an encapsulation efficiency of 80.14 ± 1.42%. Furthermore, the use of transethosomal vesicles effectively prolonged the release of ATV for a duration of 24 hours, in contrast to the pure drug suspension. In addition, the transethosomal emulgel loaded with ATV exhibited a 3.8-fold increase in the transdermal flow of ATV, in comparison to the pure drug suspension. ATV-TEs emulgel demonstrated a strong anti-inflammatory impact in the carrageenan-induced paw edema model.

Discussion

This was evident from the significant reduction in paw edema, which was equivalent to the effect of the standard anti-inflammatory medicine, Diclofenac sodium.

Conclusion

In summary, transethosomes, as a whole, might potentially serve as an effective method for delivering drugs via the skin. This could improve the ability of ATV to reduce inflammation by increasing its absorption through the skin.

Evaluation of Mucoadhesive Nano-Bilosomal In Situ Gels Containing Anti-Psychotic Clozapine for Treatment of Schizophrenia: In Vitro and In Vivo Studies

Background/Objectives: Patients with schizophrenia have significant challenges in adhering to and complying with oral medicines, resulting in adverse consequences such as symptom worsening and psychotic relapse. Methods: This study aimed to develop clove oil-based bilosomes using definitive screening design (DSD) to maximize the anti-schizophrenic action of clozapine and promote its nose-to-brain delivery. The target was to optimize the physicochemical properties of bilosomes and incorporate them into mucoadhesive intranasal in situ gels, searching for augmented ex vivo and in vivo clozapine delivery. Results: The bilosomes' particle size was decreased by increasing the span, SDC, and clove oil amounts. In addition to using a high lipid amount, the aforementioned components also helped increase the entrapment efficiency values. Increased zeta potential was only observed by increasing surfactant amount and reducing clozapine concentration. After incorporation of optimized liquid clove oil-based bilosomes, which had a spherical nano-sized vesicular shape, into P 407-dependent gels, an HPMC (2% w/w)/P 407 (20% w/w)-containing formulation (G6) was selected as an optimized gel owing to its acceptable gelation time (13.28 s), gel strength (27.72 s), viscosity (12,766.67 cP), and mucoadhesive strength (4273.93 dyne/cm2). The optimized G6 exhibited higher Jss (50.86 μg/cm2·h-1) through the nasal mucosa compared to the control gel (23.03 μg/cm2·h-1). Compared to the control gel, G6 displayed higher relative bioavailability (491.37%) than a commercial tablet (264.46%). Following ELISA analysis, dopamine and serotonin were significantly reduced, while BDNF was remarkably increased after administration of optimized G6 into schizophrenic rats. Conclusion: Our study indicates the potential of intranasal bilosomal gels in upgrading the anti-schizophrenic and neuroprotective activity of clozapine.

Sabry S, El-Nahas HM, Ayoub MM. Maximizing the Use of Ivermectin Transethosomal Cream in the Treatment of Scabies

In an effort to tackle the skin reactions frequently observed with topical application of ivermectin (IVM), a study was conducted to develop and optimize transethosomes (TESMs) loaded with IVM for scabies treatment. A three-factor, two-level (23) full factorial design was employed. Soyabean phosphatidylcholine concentration (A), ethanol concentration (B) and Span 60 amount (C) were studied as independent factors, while entrapment efficiency (EE), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and drug release after 6 h (Q6h) were characterized. The skin sensitivity of the optimized formulation was evaluated by skin irritation test and histopathological examination. The EE% ranged from 88.55 ± 0.576% to 94.13 ± 0.305%, PS was from 318.033 ± 45.61 nm to 561.400 ± 45.17 nm, PDI was from 0.328 ± 0.139 to 0.671 ± 0.103, ZP was from -54.13 ± 1.09 mV to -60.50 ± 2.34 mV and Q6h was from 66.20 ± 0.30% to 93.46 ± 0.86%. The IVM-loaded transethosomal cream showed lower skin irritation and a more intact epidermal layer with intact keratinocyte, compared to the marketed cream which showed severe destruction of the keratin layer. Therefore, patient compliance can be improved by encapsulating IVM within TESMs to minimize its skin reactions.

Lipid-based nanosystems for wound healing

INTRODUCTION

Wounds, resulting from traumas, surgery, burns or diabetes, are important medical problems due to the complexity of wound healing process regarding healing times and healthcare costs. Nanosystems have emerged as promising candidates in this field thank to their properties and versatile applications in drugs delivery.

AREAS COVERED

Lipid-based nanosystems (LBN) are described for wound treatment, highlighting their different behaviors when interacting with the cutaneous tissue. The role of nanosystems in delivering mostly natural compounds on skin as well as the technological and engineering strategies to increase their efficiency in wound healing effect are reviewed. Finally, in vitro, ex-vivo and in vivo studies are reported.

EXPERT OPINION

LBN have shown promise in addressing the challenges of wound healing as they can improve the stability of drugs used in wound therapy, leading to higher efficacy and fewer adverse effects as compared to traditional formulations. LBNs being involved in the inflammatory and proliferation stages of the wound healing process, enable the modification of wound healing through multiple ways. In addition, the use of new technologies, including 3D bioprinting and photobiomodulation, may lead to potential breakthroughs in wound healing. This would provide clinicians with more potent forms of therapy for wound healing.

Ocular Mucoadhesive and Biodegradable Sponge-Like Inserts for the Sustained and Controlled Delivery of Voriconazole; Preparation, D-optimal Factorial Optimization and in-vivo Evaluation

The aim of this study was to formulate and optimize by statistical means mucoadhesive and biodegradable sponge-like inserts loaded with voriconazole (VCZ) which increases the contact time of the drug with the eye and sustain its release from the formula in a controlled manner. This avoids the pulsed effect reported for the drug suspension and results in reducing the number of drug instillations in the eye with the result of enhancing the patient compliance. Also, the sponge like nature of the insert reduces the foreign body sensation caused by other ocular solid dosage forms. They were prepared using casting/freeze-drying technique using five polymers namely high molecular weight chitosan (CH), sodium alginate (AL), sodium carboxy methyl cellulose (CMC), gellan gum (GG) and xanthan gum (XG). The prepared inserts were subjected to evaluations of their visual appearance, weight variation, drug content, surface pH, in-vitro release (percent drug released after 1h (Q1 (%)), mean dissolution time (MDT) and dissolution efficiency (DE)) in addition to kinetic analysis of the release data, water uptake, mucoadhesion and rheology of the forming plain polymer solution at the maximum rate of shear. The independent variables of the D-optimal factorial design were the polymer type and concentration while Q1 (%), MDT, DE, % water uptake after 15 minutes and rheology at the maximum rate of shear were chosen as dependant variables. The performed optimization process using design expert software showed an optimum formula consisting of 2 % GG. It showed slow release behavior compared to the drug suspension. FTIR and DSC studies showed that there is no interaction between VCZ and GG. The optimum formula has good in-vitro mucoadhesive properties and pH in the safe ocular range. Moreover, it showed promising in-vivo results of rapid hydration and gelling in addition to good mucoadhesive behavior when instilled in the eye, high ocular safety and biocompatibility, sustained antifungal activity in comparison to the drug suspension and finally biodegradation. So, it may be taken into consideration as an outstanding carrier for the ocular delivery of VCZ.

A comprehensive review on transethosomes as a novel vesicular approach for drug delivery through transdermal route

Drug delivery through transdermal route is one of the effective methods for the application of drugs. It overcomes many drawbacks which are encountered with the oral route. Moreover, many drugs are not able to pass through the stratum corneum, which is the main barrier for the transdermal drug delivery. Formation of ultra-deformable vesicles (UDVs) is a novel technique for the transdermal applications of the drugs. Transethosomes (TEs), ethosomes, and transferosomes are all part of the UDV. Because of the presence of increased concentrations of ethanol, phospholipids, and edge activators, TEs provide improved drug permeation through the stratum corneum. Because of the elasticity of TEs, drug penetration into the deeper layer of skin also increases. TEs can be prepared using a variety of techniques, including the cold method, hot method, thin film hydration method, and the ethanol injection method. It increases patient adherence and compliance because it is a non-invasive procedure of administering drugs. Characterization of the TEs includes pH determination, size and shape, zeta potential, particle size determination, transition temperature, drug content, vesicle stability, and skin permeation studies. These vesicular systems can be utilized to deliver a variety of medications transdermally, including analgesics, antibiotics, antivirals, and anticancer and arthritis medications. This review aims to describe vesicular approaches that had been used to overcome the barrier for the transdermal delivery of drug and also describes brief composition, method of preparation, characterization tests, mechanism of penetration of TEs, as well as highlighted various applications of TEs in medicine.

Gellan gum-based bi-polymeric hydrogel scaffolds loaded with Rosuvastatin calcium: A useful tool for tendon tissue regeneration

Statins have been long used in tissue engineering, besides their marketed hypolipidemic benefits. The aim of this research was to sustain the release of rosuvastatin calcium from bi-polymeric hydrogel scaffolds. A bi-polymer blend technique was used to enhance the mechanical properties of the fabricated hydrogels. Briefly, hydrogels were prepared via crosslinking gellan gum as the main polymer together with a secondary polymer in the presence of Ca2+. The fabricated hydrogels were assessed in terms of % swelling capacity, hydrolytic degradation and % drug released to determine the most efficient carrier system. The selected hydrogel exhibited a swelling capacity of 131.45±1.49 % following 3 weeks in an aqueous environment with a % weight loss of 15.73±1.86 % after 4 weeks post-equilibrium in aqueous medium. The results ensure a proper window for adequate drug diffusion and nutrient exchange. Sustained release was attained where 94.61±2.77 % of rosuvastatin was released at the 4-week mark. Later, FT-IR and DSC, were carried out and suggested the successful crosslinking and formation of new matrix. SEM images demonstrated the porous surface of the hydrogel while a Young's modulus of 888.558±73.549 kPa indicated the suitability of the hydrogel for soft tissue engineering. In-vivo testing involved implanting the selected hydrogel at precisely surgical cuts in the Achilles tendon of male Wistar Albino rats. Upon visual and microscopic evaluation, enhanced rates of fibrous tissue formation, vascularization and collagen expression were clearly noticed in the treatment group.

Box Behnken optimization of cubosomes for enhancing the anticancer activity of metformin: Design, characterization, and in-vitro cell proliferation assay on MDA-MB-231 breast and LOVO colon cancer cell lines

This study aimed to formulate and statistically optimize cubosomal formulations of metformin (MTF) to enhance its breast anticancer activity. A Box Behnken design was employed using Design-Expert® software. The formulation variables were glyceryl monooleate concentration (GMO) w/w%, Pluronic F-127 concentration (PF127) w/w% and Tween 80 concentration w/w% whereas Entrapment efficiency (EE%), Vesicles' size (VS) and Zeta potential (ZP) were set as the dependent responses. The design expert software was used to perform the process of optimization numerically. X ray diffraction (XRD), Transmission electron microscope (TEM), in-vitro release study, short-term stability study, and in in-vitro cell proliferation assay on the MDA-MB-231 breast cancer and LOVO cancer cell lines were used to validate the optimized cubosomal formulation. The optimized formulation had a composition of 4.35616 (w/w%) GMO, 5 (w/w%) PF127 and 7.444E-6 (w/w%) Tween 80 with a desirability of 0.733. The predicted values for EE%, VS and ZP were 78.0592%, 307.273 nm and - 26.8275 mV, respectively. The validation process carried out on the optimized formula revealed that there were less than a 5% variance from the predicted responses. The XRD thermograms showed that MTF was encapsulated inside the cubosomal vesicles. TEM images of the optimized MTF cubosomal formulation showed spherical non-aggregated nanovesicles. Moreover, it revealed a sustained release profile of MTF in comparison to the MTF solution. Stability studies indicated that optimum cubosomal formulation was stable for thirty days. Cytotoxicity of the optimized cubosomal formulation was enhanced on the MDA-MB-231 breast and LOVO cancer cell lines compared to MTF solution even at lower concentrations. However, it showed superior cytotoxic effect on breast cancer cell line. So, cubosomes could be considered a promising carrier of MTF to treat breast and colon cancers.

Breaking barriers: bilosomes gel potentials to pave the way for transdermal breast cancer treatment with Tamoxifen

OBJECTIVE

Breast cancer affects women globally, regardless of age or location. On the other hand, Tamoxifen (TXN), a class II biopharmaceutical drug is acting as a prophylactic/treating agent for women at risk of and/or with hormone receptor-positive breast cancer. However, its oral administration has life-threatening side effects, which have led researchers to investigate alternative delivery methods. One such method is transdermal drug delivery utilizing bile salts as penetration enhancers, aka Bilosomes.

METHODS

Bilosomes formulations were optimized statistically for the outcome of vesicle shape, size, and entrapment efficiency using two types of bile, i.e. sodium taurocholate and sodium cholate. These bilosomes were then loaded into HPMC base gel and further characterized for their morphology, drug content, pH, viscosity, spreadability and eventually ex-vivo skin penetration and deposition studies.

RESULTS

Findings showed that sodium cholate has superiority as a penetration enhancer over sodium taurocholate in terms of morphological characterizes, zeta potential, and cumulative amounts of tamoxifen permeated per unit area (15.13 ± 0.71 μg/cm2 and 6.51 ± 0.6 μg/cm2 respectively). In fact, bilosomes designed with sodium cholate provided around 9 folds of skin deposition compared to TXN non-bilosomal gel.

CONCLUSION

Bilosomes gels could be a promising option for locally delivering tamoxifen to the breast through the skin, offering an encouraging transdermal solution.

Numerical Optimization of Prednisolone-Tacrolimus Loaded Ultraflexible Transethosomes for Transdermal Delivery Enhancement; Box-Behnken Design, Evaluation, Optimization, and Pharmacokinetic Study

The aim of the present study is to formulate highly permeable carriers (i.e., transethosomes) for enhancing the delivery of prednisolone combined with tacrolimus for both topical and systemic pathological conditions. A Box-Behnken experimental design was implemented in this research. Three independent variables: surfactant concentration (X1), ethanol concentration (X2), and tacrolimus concentration (X3) were adopted in the design while three responses: entrapment efficiency (Y1), vesicle size (Y2), and zeta potential (Y3) were investigated. By applying design analysis, one optimum formulation was chosen to be incorporated into topical gel formulation. The optimized transethosomal gel formula was characterized in terms of pH, drug content, and spreadability. The gel formula was challenged in terms of its anti-inflammatory effect and pharmacokinetics against oral prednisolone suspension and topical prednisolone-tacrolimus gel. The optimized transethosomal gel achieved the highest rate of rat hind paw edema reduction (98.34%) and highest pharmacokinetics parameters (Cmax 133.266 ± 6.469 µg/mL; AUC_0-∞ 538.922 ± 49.052 µg·h/mL), which indicated better performance of the formulated gel.

Formulation Development, Optimization by Box-Behnken Design, and In Vitro and Ex Vivo Characterization of Hexatriacontane-Loaded Transethosomal Gel for Antimicrobial Treatment for Skin Infections

There are many different infections and factors that can lead to skin illnesses, but bacteria and fungi are the most frequent. The goal of this study was to develop a hexatriacontane-loaded transethosome (HTC-TES) for treating skin conditions caused by microbes. The HTC-TES was developed utilizing the rotary evaporator technique, and Box-Behnken design (BBD) was utilized to improve it. The responses chosen were particle size (nm) (Y1), polydispersity index (PDI) (Y2), and entrapment efficiency (Y3), while the independent variables chosen were lipoid (mg) (A), ethanol (%) (B), and sodium cholate (mg) (C). The optimized TES formulation with code F1, which contains lipoid (mg) (A) 90, ethanol (%) (B) 25, and sodium cholate (mg) (C) 10, was chosen. Furthermore, the generated HTC-TES was used for research on confocal laser scanning microscopy (CLSM), dermatokinetics, and in vitro HTC release. The results of the study reveal that the ideal formulation of the HTC-loaded TES had the following characteristics: 183.9 nm, 0.262 mV, -26.61 mV, and 87.79% particle size, PDI, and entrapment efficiency, respectively. An in vitro study on HTC release found that the rates of HTC release for HTC-TES and conventional HTC suspension were 74.67 ± 0.22 and 38.75 ± 0.23, respectively. The release of hexatriacontane from TES fit the Higuchi model the best, and the Korsmeyer-Peppas model indicates the release of HTC followed a non-Fickian diffusion. By having a higher negative value for cohesiveness, the produced gel formulation demonstrated its stiffness, whereas good spreadability indicated better gel application to the surface. In a dermatokinetics study, it was discovered that TES gel considerably increased HTC transport in the epidermal layers (p < 0.05) when compared to HTC conventional formulation gel (HTC-CFG). The CLSM of rat skin treated with the rhodamine B-loaded TES formulation demonstrated a deeper penetration of 30.0 µm in comparison to the hydroalcoholic rhodamine B solution (0.15 µm). The HTC-loaded transethosome was determined to be an effective inhibitor of pathogenic bacterial growth (S. aureus and E. coli) at a concentration of 10 mg/mL. It was discovered that both pathogenic strains were susceptible to free HTC. According to the findings, HTC-TES gel can be employed to enhance therapeutic outcomes through antimicrobial activity.