Exploring the correlation between lipid packaging in lipoplexes and their transfection efficacy

Enhanced Adhesion of Mildly Positively Charged Vesicles to Endothelial Cells with Shed Glycocalyx

The glycocalyx of endothelial cells is a dynamic, gel-like layer of glycoproteins, proteoglycans, and glycolipids that lines the luminal surface of blood vessels, playing a critical role in vascular permeability, mechanotransduction, and protection against shear stress. In this study, we investigated the in vitro adhesion of giant unilamellar vesicles (GUVs) composed of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). Specifically, we examined mildly positively charged DOTAP-DMPC (20:80) GUVs, based on positively charged DOTAP and neutral DMPC but exhibiting an overall mild positive charge in physiological buffer, and neutral DMPC GUVs, which show a negative charge in physiological buffer. Adhesion to human umbilical vein endothelial cells (HUVEC) was studied under three culture conditions: dynamic (intact glycocalyx), static (underdeveloped glycocalyx), and glycocalyx-shed (degraded glycocalyx). Vesicles were produced via electroformation, stained with Texas Red dye, and perfused over endothelial cells at a controlled velocity to simulate slow blood flow. Adhesion was tracked using fluorescence microscopy combined with cell segmentation techniques. Adhesion of DOTAP-DMPC vesicles was significantly enhanced-by approximately 3.5-fold-on glycocalyx-shed cells compared to cells with an intact glycocalyx. In contrast, DMPC vesicles showed no adhesion under any condition. Analysis of vesicle size distributions revealed no significant differences between adherent and nonadherent vesicles or between DOTAP-DMPC and DMPC vesicles. These findings provide insights into the role of the endothelial glycocalyx in regulating adhesion, with potential implications for tumor cell interactions with the endothelium and mechanisms underlying DOTAP-based transfection.

Novel Efficient Lipid-Based Delivery Systems Enable a Delayed Uptake and Sustained Expression of mRNA in Human Cells and Mouse Tissues

Over the past decade, mRNA-based therapy has displayed significant promise in a wide range of clinical applications. The most striking example of the leap in the development of mRNA technologies was the mass vaccination against COVID-19 during the pandemic. The emergence of large-scale technology and positive experience of mRNA immunization sparked the development of antiviral and anti-cancer mRNA vaccines as well as therapeutic mRNA agents for genetic and other diseases. To facilitate mRNA delivery, lipid nanoparticles (LNPs) have been successfully employed. However, the diverse use of mRNA therapeutic approaches requires the development of adaptable LNP delivery systems that can control the kinetics of mRNA uptake and expression in target cells. Here, we report effective mRNA delivery into cultured mammalian cells (HEK293T, HeLa, DC2.4) and living mouse muscle tissues by liposomes containing either 1,26-bis(cholest-5-en-3β-yloxycarbonylamino)-7,11,16,20-tetraazahexacosane tetrahydrochloride (2X3) or the newly applied 1,30-bis(cholest-5-en-3β-yloxycarbonylamino)-9,13,18,22-tetraaza-3,6,25,28-tetraoxatriacontane tetrahydrochloride (2X7) cationic lipids. Using end-point and real-time monitoring of Fluc mRNA expression, we showed that these LNPs exhibited an unusually delayed (of over 10 h in the case of the 2X7-based system) but had highly efficient and prolonged reporter activity in cells. Accordingly, both LNP formulations decorated with 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000] (DSPE-PEG2000) provided efficient luciferase production in mice, peaking on day 3 after intramuscular injection. Notably, the bioluminescence was observed only at the site of injection in caudal thigh muscles, thereby demonstrating local expression of the model gene of interest. The developed mRNA delivery systems hold promise for prophylactic applications, where sustained synthesis of defensive proteins is required, and open doors to new possibilities in mRNA-based therapies.

Characterization of lipid bilayers adsorbed to functionalized air/water interfaces

Lipid bilayers immobilized in planar geometries, such as solid-supported or "floating" bilayers, have enabled detailed studies of biological membranes with numerous experimental techniques, notably X-ray and neutron reflectometry. However, the presence of a solid support also has disadvantages as it complicates the use of spectroscopic techniques as well as surface rheological measurements that would require surface deformations. Here, in order to overcome these limitations, we investigate lipid bilayers adsorbed to inherently soft and experimentally well accessible air/water interfaces that are functionalized with Langmuir monolayers of amphiphiles. The bilayers are characterized with ellipsometry, X-ray scattering, and X-ray fluorescence. Grazing-incidence X-ray diffraction reveals that lipid bilayers in a chain-ordered state can have significantly different structural features than regular Langmuir monolayers of the same composition. Our results suggest that bilayers at air/water interfaces may be well suited for fundamental studies in the field of membrane biophysics.

Smart Lipid-Based Nanosystems for Therapeutic Immune Induction against Cancers: Perspectives and Outlooks

Cancer immunotherapy, a promising and widely applied mode of oncotherapy, makes use of immune stimulants and modulators to overcome the immune dysregulation present in cancer, and leverage the host's immune capacity to eliminate tumors. Although some success has been seen in this field, toxicity and weak immune induction remain challenges. Liposomal nanosystems, previously used as targeting agents, are increasingly functioning as immunotherapeutic vehicles, with potential for delivery of contents, immune induction, and synergistic drug packaging. These systems are tailorable, multifunctional, and smart. Liposomes may deliver various immune reagents including cytokines, specific T-cell receptors, antibody fragments, and immune checkpoint inhibitors, and also present a promising platform upon which personalized medicine approaches can be built, especially with preclinical and clinical potentials of liposomes often being frustrated by inter- and intrapatient variation. In this review, we show the potential of liposomes in cancer immunotherapy, as well as the methods for synthesis and in vivo progression thereof. Both preclinical and clinical studies are included to comprehensively illuminate prospects and challenges for future research and application.

Knowledge-Based Design of 5-Fluororacil Prodrug Liposomal Formulation: Molecular Packing and Interaction Revealed by Interfacial Isotherms and X-ray Scattering Techniques

Prodrugs and nanoformulations are two effective strategies for sustained drug release and targeting drug delivery. In this study, we combined the two strategies to judiciously design the liposome formulation incorporating an amphiphilic prodrug of 5-fouroracil (5-FU), named 5-FCPal, for sustained drug release and enhanced bioavailability. 5-FCPal is an analogue of capecitabine (N⁴-pentyloxycarbonyl-5'-deoxy-5-fluorocytidine, Xeloda) by substituting the pentyl group at the N⁴ position with the palmityl. The amphiphilic molecule of 5-FCPal can self-assemble with the phospholipids to form stable vesicle structures with high drug loading. Although lipid vesicles have been widely studied and commercially used for clinical applications, because of the enormous options of the lipids and the equitable balance of hydrophobicity and bioavailability, it is essential to fundamentally understand the molecular interactions when designing and optimizing the liposomal prodrug formulations. We report the study of using X-ray liquid surface scattering techniques integrated with a Langmuir trough to explicitly reveal the interfacial behavior of the monolayer membrane of 5-FCPal with various saturated and unsaturated lipids with positively charged, neutral, and negatively charged head groups. More specifically, interfacial packing of the molecules was quantified using interfacial isotherms, X-ray reflectivity (XR), and grazing-incidence diffraction (GIXD). The results indicate that the interactions between the prodrug and the cationic lipids are most favorable. The highest drug loading is quantified by increasing the molar ratio of the prodrug until stable monolayer structures were disrupted by the multiple-layer domain of prodrug aggregates. Stable liposomes of 100 nm with 50% drug loading of 5-FCPal were generated based on the findings from the X-ray studies.

Interactions between the Cell Membrane Repair Protein S100A10 and Phospholipid Monolayers and Bilayers

Protein S100A10 participates in different cellular mechanisms and has different functions, especially at the membrane. Among those, it forms a ternary complex with annexin A2 and the C-terminal of AHNAK and then joins the dysferlin membrane repair complex. Together, they act as a platform enabling membrane repair. Both AHNAK and annexin A2 have been shown to have membrane binding properties. However, the membrane binding abilities of S100A10 are not clear. In this paper, we aimed to study the membrane binding of S100A10 in order to better understand its role in the cell membrane repair process. S100A10 was overexpressed by E. coli and purified by affinity chromatography. Using a Langmuir monolayer as a model membrane, the binding parameters and ellipsometric angles of the purified S100A10 were measured using surface tensiometry and ellipsometry, respectively. Phosphorus-31 solid-state nuclear magnetic resonance spectroscopy was also used to study the interaction of S100A10 with lipid bilayers. In the presence of a lipid monolayer, S100A10 preferentially interacts with unsaturated phospholipids. In addition, its behavior in the presence of a bilayer model suggests that S100A10 interacts more with the negatively charged polar head groups than the zwitterionic ones. This work offers new insights on the binding of S100A10 to different phospholipids and advances our understanding of the parameters influencing its membrane behavior.

Peptide-Modified Gemini Surfactants: Preparation and Characterization for Gene Delivery

Diquaternary ammonium-based gemini surfactants have been investigated widely as nonviral gene delivery systems. These unique cationic lipids have versatility in their chemical structure, show relatively low toxicity, are able to compact genetic material (pDNA, RNA) into nano-sized lipoplexes, and can be easily produced. In addition, the gemini surfactants show significant improvement in the transfection activity and biocompatibility compared to other cationic lipids used as nonviral gene delivery agents. The successful applications of gemini surfactant-based lipoplexes as topical gene delivery systems in animal models indicate their potential as noninvasive carriers for genetic immunization, theranostic agents, and in other gene therapy treatments. Detailed physicochemical characterization of gemini surfactant lipoplexes is a key factor in terms of formulation optimization and elucidation of the cellular uptake and stability of the lipoplexes system. In this chapter, we describe in detail different formulation methods to prepare gemini surfactant lipoplexes and comprehensive physicochemical characterization. In addition, we illustrate general protocols for in vitro evaluations.

AHNAK C-Terminal Peptide Membrane Binding-Interactions between the Residues 5654-5673 of AHNAK and Phospholipid Monolayers and Bilayers

The dysferlin membrane repair complex contains a small complex, S100A10-annexin A2, which initiates membrane repair by recruiting the protein AHNAK to the membrane, where it interacts via binding sites in the C-terminal region. However, no molecular data are available for the membrane binding of the various proteins involved in this complex. Therefore, the present study investigated the membrane binding of AHNAK to elucidate its role in the cell membrane repair process. A chemically synthesized peptide (pAHNAK), comprising the 20 amino acids in the C-terminal domain of AHNAK, was applied to Langmuir monolayer models, and the binding parameters and insertion angles were measured with surface tensiometry and ellipsometry. The interaction of pAHNAK with lipid bilayers was studied using ³¹P solid-state nuclear magnetic resonance. pAHNAK preferentially and strongly interacted with phospholipids that comprised negatively charged polar head groups with unsaturated lipids. This finding provides a better understanding of AHNAK membrane behavior and the parameters that influence its function in membrane repair.

Branched lipid chains to prepare cationic amphiphiles producing hexagonal aggregates: supramolecular behavior and application to gene delivery

Cationic amphiphiles featuring ramified lipid chains self-organized in water as inverted hexagonal aggregates. They demonstrated high gene delivery efficiencies.

Evaluation of novel cationic gene based liposomes with cyclodextrin prepared by thin film hydration and microfluidic systems

In gene delivery, non-viral vectors have become the preferred carrier system for DNA delivery. They can overcome major viral issues such as immunogenicity and mutagenicity. Cationic lipid-mediated gene transfer is one of the most commonly used non-viral vectors, which have been shown to be a safe and effective carrier. However, their use in gene delivery often exhibits low transfection efficiency and stability. The aim of this study was to examine the effectiveness of novel non-viral gene delivery systems. This study has investigated the encapsulation and transfection efficiency of cationic liposomes prepared from DOTAP and carboxymethyl-β-cyclodextrin (CD). The encapsulation efficiency of the CD-lipoplex complexes were also studied with and without the addition of Pluronic-F127, using both microfluidic and thin film hydration methods. In vitro transfection efficiencies of these complexes were determined in COS7 and SH-SY5Y cell lines. Formulation stability was evaluated using liposomes size, zeta potential and polydispersity index. In addition, the external morphology was studied using transmission electron microcopy (TEM). Results revealed that formulations produced by microfluidic method had smaller, more uniform and homogenious size and zeta-potential as well as higher encapsulation efficiency when compared with liposomes manufactured by thin film hydration method. Overall, the results of this study show that carboxymethyl-β-cyclodextrin increased lipoplexes' encapsulation efficiency using both NanoAssemblr and rotary evaporator manufacturing processes. However, this increase was reduced slightly following the addition of Pluronic-F127. The addition of carboxymethyl-β-cyclodextrin to cationic liposomes resulted in an increase in transfection efficiency in mammalian cell lines. However, this increase appeared to be cell line specific, COS7 showed higher transfection efficiency compared to SH-SY5Y.

Bis-Thioether-Containing Lipid Chains in Cationic Amphiphiles: Physicochemical Properties and Applications in Gene Delivery

Cationic amphiphiles featuring two thioether functions in each lipid chain of bicatenar cationic amphiphiles are reported here for the first time. The physicochemical properties and transfection abilities of these new amphiphiles were compared with those of already reported analogues featuring either (i) saturated, (ii) unsaturated or (iii) mono-thioether containing lipid chains. The homogeneity of the series of new compounds allowed to clearly underscore the effect of bis-thioether containing lipid chains. This study shows that besides previous strategies based on unsaturation or ramification, the incorporation of two thioether functions per lipid chain constitutes an original complementary alternative to tune the supramolecular properties of amphiphilic compounds. The potential of this strategy was evaluated in the context of gene delivery and report that two cationic amphiphiles (i. e. 4 a and 4 b) can be proposed as new efficient transfection reagents.

Effect of PEGylation on Ligand-Targeted Magnetoliposomes: A Missed Goal

We tested the targeting efficiency of magnetoliposomes (MLPs) labeled with tripeptide arginine-glycine-aspartic acid (RGD) on two types of cells: HeLa cells expressing RGD receptors and 3T3 cells lacking RGD receptors. The targeting ability of RGD-MLPs was compared to that of bare MLPs and MLPs stabilized with poly(ethylene glycol) (PEG). Cellular internalization of these liposomes was determined by flow cytometry and confocal microscopy, which showed that both types of cells took up more nontargeting MLPs than targeting RGD-MLPs or PEG-MLPs, with PEG-MLPs showing the lowest degree of internalization. The presence of specific receptors on HeLa cells did not facilitate the binding of RGD-MLPs, probably due to the presence of PEG chains on the liposomal surface. The polymer increases the circulation time of the liposomes in the organism but reduces their interactions with cells. Despite the localization of the RGD peptide on the tip of PEG in RGD-MLPs, the interaction between the liposome and cell was still limited. To avoid this drawback, targeting drug delivery systems can be prepared with two types of PEG: one of a short length to enable biocompatibility and the other of a longer chain to carry the ligand.

Disordering Effects of Digitonin on Phospholipid Monolayers

Digitonin, a steroidal saponin obtained from the foxglove plant (Digitalis purpurea), displays a wide spectrum of biological properties and is often used as a model in mechanistic investigations of the biological activity of saponins. In the present study, Langmuir monolayers of zwitterionic (DPPC, DMPE, POPC, POPE, DSPC, DSPE, and DPPE) and ionic (DPPS and DPPG) phospholipids were employed in order to better understand the effect of digitonin on the lipid organization. For this purpose, a combination of surface pressure relaxation, infrared reflection absorption spectroscopy (IRRAS), and fluorescence microscopy measurements was used. The observed increase in surface pressure (Π) suggests that digitonin can adsorb at the air/water interface, both bare and covered with the uncompressed phospholipid monolayers. However, the detailed analysis of IRRAS and fluorescence microscopy data shows that digitonin interacts with the lipid monolayers in a very selective way, and both the headgroup and the lipid tails affect this interaction. Nevertheless, it should be noted that in no case did digitonin cause any disruptive effects on the monolayers. The DPPE and DPPS monolayers get disordered by penetration with digitonin, despite an increase in surface pressure, leading to an unprecedented LC-LE transition. Interestingly, saponin could be easily squeezed out of these monolayers by mechanical compression.

Di-Peptide-Modified Gemini Surfactants as Gene Delivery Vectors: Exploring the Role of the Alkyl Tail in Their Physicochemical Behavior and Biological Activity

The aim of this work was to elucidate the structure-activity relationship of new peptide-modified gemini surfactant-based carriers. Glycyl-lysine modified gemini surfactants that differ in the length and degree of unsaturation of their alkyl tail were used to engineer DNA nano-assemblies. To probe the optimal nitrogen to phosphate (N/P) ratio in the presence of helper lipid, in vitro gene expression and cell toxicity measurements were carried out. Characterization of the nano-assemblies was accomplished by measuring the particle size and surface charge. Morphological characteristics and lipid organization were studied by small angle X-ray scattering technique. Lipid monolayers were studied using a Langmuir-Blodgett trough. The highest activity of glycyl-lysine modified gemini surfactants was observed with the 16-carbon tail compound at 2.5 N/P ratio, showing a 5- to 10-fold increase in the level of reporter protein compared to the 12 and 18:1 carbon tail compounds. This ratio is significantly lower compared to the previously studied gemini surfactants with alkyl or amino- spacers. In addition, the 16-carbon tail compound exhibited the highest cell viability (85%). This high efficiency is attributed to the lowest critical micelle concentration of the 16-tail gemini surfactant and a balanced packing of the nanoparticles by mixing a saturated and unsaturated lipid together. At the optimal N/P ratio, all nanoparticles exhibited an inverted hexagonal lipid assembly. The results show that the length and nature of the tail of the gemini surfactants play an important role in determining the transgene efficiency of the delivery system. We demonstrated here that the interplay between the headgroup and the nature of tail is specific to each series, thus in the process of rational design, the contribution of the latter should be assessed in the appropriate context.

EpCAM-targeted liposomal si-RNA delivery for treatment of epithelial cancer

BACKGROUND

RNA interference (RNAi) technology using short interfering RNA (si-RNA) has shown immense potential in the treatment of cancers through silencing of specific genes. Cationic non-viral vectors employed for gene delivery exhibit toxic effects in normal cells limiting their widespread use, therefore, site-specific delivery using benign carriers could address this issue.

OBJECTIVE

Design of a non-toxic carrier that enables site-specific delivery of si-RNA into the cancer cells is of prime importance to realize the promise of gene silencing.

METHODS

In the present study, non-cationic liposomes encapsulating si-RNA against epithelial cell adhesion molecule (EpCAM) were developed and characterized for encapsulation efficiency, colloidal stability, in vitro and in vivo gene silencing efficacy.

RESULTS

PEGylated liposomes containing phosphatidyl choline and phosphatidyl ethanolamine exhibited maximum si-RNA encapsulation efficiency of 47%, zeta potential of -21 mV, phase transition temperature of 51 °C and good colloidal stability in phosphate-buffered saline (PBS) containing bovine serum albumin (BSA) and plasma protein (PP) at 37 °C. Conjugation of epithelial cell adhesion molecule (EpCAM) antibody to the liposomes resulted in enhanced cell internalization and superior down-regulation of EpCAM gene in MCF-7 cell lines when compared with free si-RNA and the non-targeted liposomes. In vivo evaluation of immunoliposomes for their efficacy in regressing the tumor volume in Balb/c SCID mice showed about 35% reduction of tumor volume in comparison with the positive control when administered with an extremely low dose of 0.15 mg/kg twice a week for 4 weeks.

CONCLUSION

Our results exhibit that the nanocarrier-mediated silencing of EpCAM gene is a promising strategy to treat epithelial cancers.

High-throughput manufacturing of size-tuned liposomes by a new microfluidics method using enhanced statistical tools for characterization

Microfluidics has recently emerged as a new method of manufacturing liposomes, which allows for reproducible mixing in miliseconds on the nanoliter scale. Here we investigate microfluidics-based manufacturing of liposomes. The aim of these studies was to assess the parameters in a microfluidic process by varying the total flow rate (TFR) and the flow rate ratio (FRR) of the solvent and aqueous phases. Design of experiment and multivariate data analysis were used for increased process understanding and development of predictive and correlative models. High FRR lead to the bottom-up synthesis of liposomes, with a strong correlation with vesicle size, demonstrating the ability to in-process control liposomes size; the resulting liposome size correlated with the FRR in the microfluidics process, with liposomes of 50 nm being reproducibly manufactured. Furthermore, we demonstrate the potential of a high throughput manufacturing of liposomes using microfluidics with a four-fold increase in the volumetric flow rate, maintaining liposome characteristics. The efficacy of these liposomes was demonstrated in transfection studies and was modelled using predictive modeling. Mathematical modelling identified FRR as the key variable in the microfluidic process, with the highest impact on liposome size, polydispersity and transfection efficiency. This study demonstrates microfluidics as a robust and high-throughput method for the scalable and highly reproducible manufacture of size-controlled liposomes. Furthermore, the application of statistically based process control increases understanding and allows for the generation of a design-space for controlled particle characteristics.

Novel cationic polyene glycol phospholipids as DNA transfer reagents--lack of a structure-activity relationship due to uncontrolled self-assembling processes

Cationic glycol phospholipids were synthesized introducing chromophoric, rigid polyenoic C20:5 and C30:9 chains next to saturated flexible alkyl chains of variable lengths C6-20:0. Surface properties and liposome formation of the amphiphilic compounds were determined, the properties of liposome/DNA complexes (lipoplexes) were established using three formulations (no co-lipid, DOPE as a co-lipid, or cholesterol as a co-lipid), and the microstructure of the best transfecting compounds inspected using small angle X-ray diffraction to explore details of the partially ordered structures of the systems that constitute the series. Transfection and cytotoxicity of the lipoplexes were evaluated by DNA delivery to Chinese hamster ovary (CHO-K1) cells using the cationic glycerol phospholipid 1,2-dioleoyl-sn-glycero-3-ethylphosphocholine (EPC) as a reference compound. The uncontrollable self-association of the molecules in water resulted in aggregates and liposomes of quite different sizes without a structure-property relationship. Likewise, adding DNA to the liposomes gave rise to unpredictable sized lipoplexes, which, again, transfected without a structure-activity relationship. Nevertheless, one compound among the novel lipids (C30:9 chain paired with a C20:0 chain) exhibited comparable transfection efficiency and toxicity to the control cationic lipid EPC. Thus, the presence of a rigid polyene chain in this best performing achiral glycol lipid did not have an influence on transfection compared with the chiral glycerolipid reference ethyl phosphocholine EPC with two flexible saturated C14 chains.

DNA association-enhanced physical stability of catanionic vesicles composed of ion pair amphiphile with double-chain cationic surfactant

Physical stability control of vesicle/DNA complexes is a key issue for the development of catanionic vesicles composed of ion pair amphiphile (IPA) as DNA carriers. In this work, physical stability characteristics of the complexes of DNA with positively charged catanionic vesicles composed of an IPA and a double-chain cationic surfactant, dihexadecyldimethylammonium bromide (DHDAB), were explored. It was found that in water, the mixed IPA/DHDAB catanionic vesicles became stable when the mole fraction of DHDAB (xDHDAB) was increased up to 0.5. The improved physical stability of the vesicles with a high xDHDAB could be related to the enhanced electrostatic interaction between the vesicles. When the catanionic vesicles interacted with DNA, excellent physical stability was detected for the vesicle/DNA complexes especially with a high xDHDAB. However, this could not be fully explained by the electrostatic interaction effect, and the role of molecular packing within the vesicular bilayers was apparently important. The corresponding Langmuir monolayer study demonstrated that the molecular packing of mixed IPA/DHDAB layers became ordered with DNA association due to inhibited desorption of the positively charged moiety of the IPA. Moreover, the DNA association-induced improvement in the molecular packing of the mixed IPA/DHDAB layers became pronounced with increased xDHDAB. The results imply that one can fabricate catanionic vesicle/DNA complexes with excellent physical stability through the improved molecular packing in the IPA vesicular bilayers with DHDAB addition and DNA association.

The role of lipid geometry in designing liposomes for the solubilisation of poorly water soluble drugs

Liposomes are well recognised for their ability to improve the delivery of a range of drugs. More commonly they are applied for the delivery of water-soluble drugs, but given their structural attributes, they can also be employed as solubilising agents for low solubility drugs as well as drug targeting agents. To further explore the potential of liposomes as solubilising agents, we have investigated the role of bilayer packaging in promoting drug solubilisation in liposome bilayers. The effect of alkyl chain length and symmetry was investigated to consider if using 'mis-matched' phospholipids could create 'voids' within the bilayers, and enhance bilayer loading capacity. Lipid packing was investigated using Langmuir studies, which demonstrated that increasing the alkyl chain length enhanced lipid packing, with condensed monolayers forming, whilst asymmetric lipids formed less condensed monolayers. However, this more open packing did not translate into improved drug loading, with the longer chain, condensed bilayers formed from long-chain, saturated lipids offering higher drug loading capacity. These studies demonstrate that liposomes formulated from longer chain, saturated lipids offer enhanced solubilisation capacity. However the molecular size, rather than lipophilicity, of the drug to be incorporated was also a key factor dominating bilayer incorporation efficiency.