Tissue engineered human skin equivalents

Integrating melt electrowriting (MEW) PCL scaffolds with fibroblast-laden hydrogel toward vascularized skin tissue engineering

Three-dimensional (3D) skin equivalents (SEs) are promising platforms for studying skin disease or assessing the safety of skin-relevant products. Vascularization, which improves the functionality of reconstructed skin, is one of the remaining hurdles in SE production that, when successfully introduced, can widen SE applications. Here, combining porous polycaprolactone (PCL) melt electrowritten (MEW) scaffolds with fibroblast-laden methacrylated gelatin hydrogel (GelMA), we developed SEs with cellular vascular structure. The MEW scaffolds were composed of two layers: random fibers for culturing the keratinocytes to fabricate the epidermis; and well-aligned shapes filled with fibroblast-laden GelMA to mimic the dermis. Three dermal designs varying in porosities and pore sizes were compared to optimize the dermis reconstruction. Within one week, the design with bigger pore sizes achieved optimal cell distribution, penetration, and extracellular matrix (ECM) deposition. Additionally, Retinoic acid (RTA) was tested for improving ECM deposition. To mimic vasculature, we incorporated vascular grafts into the optimized SEs. These were fabricated by casting endothelial fibroblast-laden Matrigel onto small-diameter MEW-tubular structures. The versatility and reproducibility of the obtained SEs offer a robust new tool for in vitro testing and exploration of fundamental biological processes of skin tissue.

Role of Mitochondrial Dynamics in Skin Homeostasis: An Update

Skin aging is the most prominent phenotype of host aging and is the consequence of a combination of genes and environment. Improving skin aging is essential for maintaining the healthy physiological function of the skin and the mental health of the human body. Mitochondria are vital organelles that play important roles in cellular mechanisms, including energy production and free radical balance. However, mitochondrial metabolism, mitochondrial dynamics, biogenesis, and degradation processes vary greatly in various cells in the skin. It is well known that mitochondrial dysfunction can promote the aging and its associated diseases of the skin, resulting in the damage of skin physiology and the occurrence of skin pathology. In this review, we summarize the important role of mitochondria in various skin cells, review the cellular responses to vital steps in mitochondrial quality regulation, mitochondrial dynamics, mitochondrial biogenesis, and mitochondrial phagocytosis, and describe their importance and specific pathways in skin aging.

In vitro 3D skin culture and its sustainability in toxicology: a narrative review

In current toxicological research, 2D cell cultures and animal models are well- accepted and commonly employed methods. However, these approaches have many drawbacks and are distant from the actual environment in human. To embrace this, great efforts have been made to provide alternative methods for non-animal skin models in toxicology studies with the need for more mechanistically informative methods. This review focuses on the current state of knowledge regarding the in vitro 3D skin model methods, with different functional states that correspond to the sustainability in the field of toxicology testing. We discuss existing toxicology testing methods using in vitro 3D skin models which provide a better understanding of the testing requirements that are needed. The challenges and future landscape in using the in vitro 3D skin models in toxicology testing are also discussed. We are confident that the in vitro 3D skin models application may become an important tool in toxicology in the context of risk assessment.

Assessing Barrier Function in Psoriasis and Cornification Models of Artificial Skin Using Non-Invasive Impedance Spectroscopy

Reconstructed epidermal equivalents (REEs) consist of two distinct cell layers - the stratum corneum (SC) and the keratinocyte layer (KL). The interplay of these layers is particularly crucial in pruritic inflammatory disorders, like psoriasis, where a defective SC barrier is associated with immune dysregulation. However, independent evaluation of the skin barrier function of the SC and KL in REEs is highly challenging because of the lack of quantitative methodologies that do not disrupt the counter layer. Here, a non-invasive impedance spectroscopy technique is introduced for dissecting the distinct contributions of the SC and KL to overall skin barrier function without disrupting the structure. These findings, inferred from the impedance spectra, highlight the individual barrier resistances and maturation levels of each layer. Using an equivalent circuit model, a correlation between impedance parameters and specific skin layers, offering insights beyond traditional impedance methods that address full-thickness skin only is established. This approach successfully detects subtle changes, such as increased paracellular permeability due to mild irritants and the characterization of an immature SC in psoriatic models. This research has significant implications, paving the way for detailed mechanistic investigations and fostering the development of therapies for skin irritation and inflammatory disorders.

Efficacy of SGPP2 Modulation-Mediated Materials in Ameliorating Facial Wrinkles and Pore Sagging

Skin aging is a complex process with internal and external factors. Recent studies have suggested that enlargement and elongation of skin pores may be early signs of aging in addition to wrinkles and loss of elasticity. This study explores the potential of targeting the SGPP2 gene in keratinocytes to address these emerging concerns. Using siRNA knockdown, we demonstrated that SGPP2 modulates the production of inflammatory cytokines (interleukin (IL)-1β and IL-8). Furthermore, conditioned media experiments revealed that keratinocytes with high SGPP2 expression indirectly influence fibroblast extracellular matrix remodeling, potentially contributing to enlarged pores and wrinkle formation. Based on these findings, we explored a complex formulation containing four SGPP2-modulating compounds. In vitro and in vivo experiments demonstrated the efficacy of the formulation in mitigating fine wrinkles and pore enlargement. This study highlights the significant implications of developing a more effective antiaging cosmetic formulation by targeting underlying inflammatory processes that drive skin aging.

Ideal Living Skin Equivalents, From Old Technologies and Models to Advanced Ones: The Prospects for an Integrated Approach

The development of technologies for the generation and transplantation of living skin equivalents (LSEs) is a significant area of translational medicine. Such functional equivalents can be used to model and study the morphogenesis of the skin and its derivatives, to test drugs, and to improve the healing of chronic wounds, burns, and other skin injuries. The evolution of LSEs over the past 50 years has demonstrated the leap in technology and quality and the shift from classical full-thickness LSEs to principled new models, including modification of classical models and skin organoids with skin derived from human-induced pluripotent stem cells (iPSCs) (hiPSCs). Modern methods and approaches make it possible to create LSEs that successfully mimic native skin, including derivatives such as hair follicles (HFs), sebaceous and sweat glands, blood vessels, melanocytes, and nerve cells. New technologies such as 3D and 4D bioprinting, microfluidic systems, and genetic modification enable achievement of new goals, cost reductions, and the scaled-up production of LSEs.

Greater mechanistic understanding of the cutaneous pathogenesis of Stevens-Johnson syndrome/toxic epidermal necrolysis can shed light on novel therapeutic strategies: a comprehensive review

PURPOSE OF REVIEW

Stevens-Johnson syndrome/toxic epidermal necrolysis (SJS/TEN) are severe cutaneous adverse drug reactions (SCARs) characterized by widespread epithelial detachment and blistering, which affects the skin and mucocutaneous membranes. To date, therapeutic interventions for SJS/TEN have focused on systematic suppression of the inflammatory response using high-dose corticosteroids or intravenous immunoglobulin G (IgG), for example. No targeted therapies for SJS/TEN currently exist.

RECENT FINDINGS

Though our understanding of the pathogenesis of SJS/TEN has advanced from both an immunological and dermatological perspective, this knowledge is yet to translate into the development of new targeted therapies.

SUMMARY

Greater mechanistic insight into SJS/TEN would potentially unlock new opportunities for identifying or repurposing targeted therapies to limit or even prevent epidermal injury and blistering.

Superficial Venous Disease-An Updated Review

BACKGROUND

This review article provides an updated review of a relatively common pathology with various manifestations. Superficial venous diseases (SVDs) are a broad spectrum of venous vascular disease that predominantly affects the body's lower extremities. The most serious manifestation of this disease includes varicose veins, chronic venous insufficiency, stasis dermatitis, venous ulcers, superficial venous thrombosis, reticular veins, and spider telangiectasias.

METHODS

The anatomy, pathophysiology, and risk factors of SVD were discussed during this review. The risk factors for developing SVD were related to race, age, sex, lifestyle, and certain genetic conditions as well as comorbid deep vein thrombosis. Various classification systems were listed, focusing on the most common one-the revised Clinical-Etiology-Anatomy-Pathophysiology classification. The clinical features including history and physical examination findings elicited in SVD were outlined.

RESULTS

Imaging modalities utilized in SVD were highlighted. Duplex ultrasound is the first line in evaluating SVD but magnetic resonance imaging and computed tomography venography, plethysmography, and conventional venography are feasible options in the event of an ambiguous venous duplex ultrasound study. Treatment options highlighted in this review ranged from conservative treatment with compression stockings, which could be primary or adjunctive to pharmacologic topical and systemic agents such as azelaic acid, diuretics, plant extracts, medical foods, nonsteroidal anti-inflammatory drugs, anticoagulants and skin substitutes for different stages of SVD. Interventional treatment modalities include thermal ablative techniques like radiofrequency ablationss, endovenous laser ablation, endovenous steam ablation, and endovenous microwave ablation as well as nonthermal strategies such as the Varithena (polidocanol microfoam) sclerotherapy, VenaSeal (cyanoacrylate) ablation, and Endovenous mechanochemical ablation. Surgical treatments are also available and include debridement, vein ligation, stripping, and skin grafting.

CONCLUSIONS

SVDs are prevalent and have varied manifestations predominantly in the lower extremities. Several studies highlight the growing clinical and financial burden of these diseases. This review provides an update on the pathophysiology, classification, clinical features, and imaging findings as well as the conservative, pharmacological, and interventional treatment options indicated for different SVD pathologies. It aims to expedite the timely deployment of therapies geared toward reducing the significant morbidity associated with SVD especially varicose veins, venous ulcers, and venous insufficiency, to improve the quality of life of these patients and prevent complications.

Development of 3D skin equivalents for application in photodynamic biostimulation therapy assays using curcumin nanocapsules

For decades, animal models have been the standard approach in drug research and development, as they are required by regulations in the transition from preclinical to clinical trials. However, there is growing ethical and scientific concern regarding these trials, as 80 % of the therapeutic potential observed in pre-clinical studies are often unable to be replicated, despite demonstrating efficacy and safety. In response to this, Tissue Engineering has emerged as a promising alternative that enables the treatment of various diseases through the production of biological models for advanced biological assays or through the direct development of tissue repairs or replacements. One of the promising applications of Tissue Engineering is the development of three-dimensional (3D) models for in vitro tests, replacing the need for in vivo animal models. In this study, 3D skin equivalents (TSE) were produced and used as an in vitro model to test photobiostimulation using curcumin-loaded nanocapsules. Photodynamic biostimulation therapy uses photodynamic processes to generate small amounts of reactive oxygen species (ROS), which can activate important biological effects such as cell differentiation, modulation of inflammatory processes and contribution to cell regeneration. The PLGA nanocapsules (NC) used in the study were synthesized through a preformed polymer deposition method, exhibiting particle size <200 nm, Zeta potential >|30| and polydispersity index between 0.5 and 0.3. Atomic force microscopy analyzes confirmed that the particle size was <200 nm, with a spherical morphology and a predominantly smooth and uniform surface. The NC biocompatibility assay did not demonstrate cytotoxicity for the concentrations tested (2.5-25 μg mL-1).The in vitro release assay showed a slow and sustained release characteristic of the nanocapsules, and cellular uptake assays indicated a significant increase in cellular internalization of the curcumin-loaded nanostructure. Monolayer photobiostimulation studies revealed an increase in cell viability of the HDFn cell line (viability 134 %-228 %) for all LED fluences employed at λ = 450 nm (150, 300, and 450 mJ cm-2). Additionally, the scratch assays, monitoring in vitro scar injury, demonstrated more effective effects on cell proliferation with the fluence of 300 mJ cm-2. Staining of TSE with hematoxylin and eosin showed the presence of cells with different morphologies, confirming the presence of fibroblasts and keratinocytes. Immunohistochemistry using KI-67 revealed the presence of proliferating cells in TSE after irradiation with LED λ = 450 nm (150, 300, and 450 mJ cm-2).

Fabrication of gelatin-based antibacterial bilayer wound dressing using direct writing and electrospinning methods

Fabricating a fibrous well-ordered wound dressing for accelerating full-thickness wounds is a desirable treatment vector. Here, through modifications in the material extrusion device and adding a pneumatic-based injection, a material extrusion method for gelatin was introduced with the ability to fabricate 3D structure with repeat layers to support cell activity for the under layer. Furthermore, in the upper layer, the co-electrospinning of PU with gelatin was designed to simultaneously exploit the oxygen permeability and mechanical stability of PU with regenerative properties and collagen-like structure of gelatin. Moreover, zinc oxide nanoparticles (ZnO) was added into the 3D-printed under layer to synergistically benefit from the antibacterial properties of ZnO and the excellent biocompatibility of gelatin. The controllable porosity of the under layer, enabled through the additive manufacturing method, was adjusted to mimic the extracellular matrix of natural tissue with around (127.28 ± 20.70) μm pore size after swelling with smooth fibers. S. aureus, E. coli, Bacillus subtilis, and Pseudomonas with inhibition zone diameters at ∼ 2.14 cm and ∼ 1.96 cm, ∼ 4.01 cm, and ∼ 2.24 cm, respectively. Moreover, the scaffold showed great biocompatibility toward fibroblast cells after 7 days of cell culture with ∼ 89 % cell viability.

The Goettingen minipig as an experimental model in wound-healing studies

Background

Deep dermal wounds in extensive burns and chronic wound-healing disorders represent a significant medical problem and require a high level of therapy to reduce the risk of infection and other long-term consequences, such as amputation. A better understanding of the wound-healing processes is essential, and animal models are indispensable to fundamental research.

Objective

This study aimed to provide a transparent protocol and prove the effectiveness of an in vivo porcine model using Goettingen minipigs for wound-healing studies.

Material and methods

Thirteen female Goettingen minipigs were kept in species-appropriate housing and were treated according to the German law for the protection of animals. The study was performed with permission from the local ethical review committee of animal welfare. The experimental procedure for studying dermal regeneration in 102 full-thickness wounds through clinical observation and histological analysis, focusing on neodermal formation, is described in detail.

Results

The Goettingen minipig model proved to be suitable in wound-healing studies. The dermal regeneration was evident and viewable without wound contamination or any rejection reaction. The histological evaluations were also reliable and clearly presented the optimized wound healing of deep dermal wounds using the different therapeutic approaches.

Conclusion

Given the great clinical need for alternative or complementary therapies, we considered the Goettingen minipig trial a reliable, ethically justifiable, effective, and reproducible in vivo model for wound-healing studies.

Improvement in Facial Wrinkles Using Materials Enhancing PPARGC1B Expression Related to Mitochondrial Function

Skin aging is an unavoidable natural phenomenon caused by intrinsic and extrinsic factors. In modern society, the pursuit of a wrinkle-free and aesthetically appealing face has gained considerable prominence. Numerous studies have aimed at mitigating the appearance of facial wrinkles. Antiaging research focused on regulating the function of mitochondria, the main reactive oxygen species-generating organelles, has been extensively conducted. In this study, we investigated the correlation between facial wrinkles and the expression of PPARGC1B, considering the association of this gene with mitochondrial function, to identify its potential as a target for exploring antiaging cosmetic materials. We elucidated the role of PPARGC1B in the skin and identified five bioactive materials that modulated its expression. The effectiveness of these materials was verified through in vitro experiments on human dermal fibroblasts. We prepared cosmetic formulations incorporating the five materials and confirmed their ability to enhance dermal collagen in three-dimensional skin models and reduce facial wrinkles under the eyes and nasolabial fold areas in human subjects. The study findings have significant implications for developing novel antiaging cosmetic formulations by reinforcing mitochondrial functions.

Bringing innovative wound care polymer materials to the market: Challenges, developments, and new trends

The development of innovative products for treating acute and chronic wounds has become a significant topic in healthcare, resulting in numerous products and innovations over time. The growing number of patients with comorbidities and chronic diseases, which may significantly alter, delay, or inhibit normal wound healing, has introduced considerable new challenges into the wound management scenario. Researchers in academia have quickly identified promising solutions, and many advanced wound healing materials have recently been designed; however, their successful translation to the market remains highly complex and unlikely without the contribution of industry experts. This review article condenses the main aspects of wound healing applications that will serve as a practical guide for researchers working in academia and industry devoted to designing, evaluating, validating, and translating polymer wound care materials to the market. The article highlights the current challenges in wound management, describes the state-of-the-art products already on the market and trending polymer materials, describes the regulation pathways for approval, discusses current wound healing models, and offers a perspective on new technologies that could soon reach consumers. We envision that this comprehensive review will significantly contribute to highlighting the importance of networking and exchanges between academia and healthcare companies. Only through the joint of these two actors, where innovation, manufacturing, regulatory insights, and financial resources act in harmony, can wound care products be developed efficiently to reach patients quickly and affordably.

Advancements in Regenerative Hydrogels in Skin Wound Treatment: A Comprehensive Review

This state-of-the-art review explores the emerging field of regenerative hydrogels and their profound impact on the treatment of skin wounds. Regenerative hydrogels, composed mainly of water-absorbing polymers, have garnered attention in wound healing, particularly for skin wounds. Their unique properties make them well suited for tissue regeneration. Notable benefits include excellent water retention, creating a crucially moist wound environment for optimal healing, and facilitating cell migration, and proliferation. Biocompatibility is a key feature, minimizing adverse reactions and promoting the natural healing process. Acting as a supportive scaffold for cell growth, hydrogels mimic the extracellular matrix, aiding the attachment and proliferation of cells like fibroblasts and keratinocytes. Engineered for controlled drug release, hydrogels enhance wound healing by promoting angiogenesis, reducing inflammation, and preventing infection. The demonstrated acceleration of the wound healing process, particularly beneficial for chronic or impaired healing wounds, adds to their appeal. Easy application and conformity to various wound shapes make hydrogels practical, including in irregular or challenging areas. Scar minimization through tissue regeneration is crucial, especially in cosmetic and functional regions. Hydrogels contribute to pain management by creating a protective barrier, reducing friction, and fostering a soothing environment. Some hydrogels, with inherent antimicrobial properties, aid in infection prevention, which is a crucial aspect of successful wound healing. Their flexibility and ability to conform to wound contours ensure optimal tissue contact, enhancing overall treatment effectiveness. In summary, regenerative hydrogels present a promising approach for improving skin wound healing outcomes across diverse clinical scenarios. This review provides a comprehensive analysis of the benefits, mechanisms, and challenges associated with the use of regenerative hydrogels in the treatment of skin wounds. In this review, the authors likely delve into the application of rational design principles to enhance the efficacy and performance of hydrogels in promoting wound healing. Through an exploration of various methodologies and approaches, this paper is poised to highlight how these principles have been instrumental in refining the design of hydrogels, potentially revolutionizing their therapeutic potential in addressing skin wounds. By synthesizing current knowledge and highlighting potential avenues for future research, this review aims to contribute to the advancement of regenerative medicine and ultimately improve clinical outcomes for patients with skin wounds.

Recreating Human Skin In Vitro: Should the Microbiota Be Taken into Account?

Skin plays crucial roles in the human body: besides protecting the organism from external threats, it acts as a thermal regulator, is responsible for the sense of touch, hosts microbial communities (the skin microbiota) involved in preventing the invasion of foreign pathogens, contains immunocompetent cells that maintain a healthy immunogenic/tolerogenic balance, and is a suitable route for drug administration. In the skin, four defense levels can be identified: besides the physical, chemical, and immune barriers that are inherent to the tissue, the skin microbiota (i.e., the numerous microorganisms living on the skin surface) provides an additional barrier. Studying the skin barrier function or the effects of drugs or cosmetic agents on human skin is a difficult task since snapshot evidence can only be obtained using bioptic samples where dynamic processes cannot properly be followed. To overcome these limitations, many different in vitro models of human skin have been developed that are characterized by diverse levels of complexity in terms of chemical, structural, and cellular composition. The aim of this review is to summarize and discuss the advantages and disadvantages of the different human skin models so far available and to underline how the insertion of a proper microbiota would positively impact an in vitro human skin model in an attempt to better mimic conditions in vivo.

3D human foreskin model for testing topical formulations of sildenafil citrate

Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.

Development of a membrane and a bilayer of chitosan, gelatin, and polyhydroxybutyrate to be used as wound dressing for the regeneration of rat excisional wounds

The skin is the largest organ in the human body that acts as a protective barrier from the outside environment. Certain dermatological pathologies or significant skin lesions can result in serious complications. Several studies have focused on the development of tissue-engineered skin substitutes. In this study, a new bilayer scaffold composed of a chitosan-gelatin membrane and a chitosan-polyhydroxybutyrate (PHB) porous matrix was synthesized and populated with human adipose-derived mesenchymal stem cells (hASCs) to be potentially used for wound dressing applications. By combining this membrane and porous matrix with the stem cells, we aimed to provide immunomodulation and differentiation capabilities for the wound environment, as well as mechanical strength and biocompatibility for the underlying tissue. The membrane was prepared from the mixture of chitosan and gelatin in a 2:1 ratio and the porous matrix was prepared from the mixture of chitosan and PHB, in equal proportions to form a final solution at 2.5% (m/v). Fourier transform infrared spectroscopy analysis showed the formation of blends, and micro-computed tomography, scanning electron microscopy and atomic force microscopy images demonstrated membrane roughness and matrix porosity. The MTT assay showed that the scaffolds were biocompatible with hASC. The membrane and the bilayer were used as dressing and support for cell migration in the dorsal excisional wound model in Wistar rats. Histological and gene transcriptional analyses showed that the animals that received the scaffolds regenerated the hair follicles in the deep dermis in the central region of the wound. Our results demonstrate the potential of these new biomaterials as dressings in wound healing studies, favoring tissue regeneration.

Macrocystis pyrifera Lipids Reduce Cytokine-Induced Pro-Inflammatory Signalling and Barrier Dysfunction in Human Keratinocyte Models

Atopic dermatitis is a chronic condition where epidermal barrier dysfunction and cytokine production by infiltrating immune cells exacerbate skin inflammation and damage. A total lipid extract from Macrocystis pyrifera, a brown seaweed, was previously reported to suppress inflammatory responses in monocytes. Here, treatment of human HaCaT keratinocytes with M. pyrifera lipids inhibited tumour necrosis factor (TNF)-α induced TNF receptor-associated factor 2 and monocyte chemoattractant protein (MCP)-1 protein production. HaCaT cells stimulated with TNF-α, interleukin (IL)-4, and IL-13 showed loss of claudin-1 tight junctions, but little improvement was observed following lipid pre-treatment. Three-dimensional cultures of HaCaT cells differentiated at the air-liquid interface showed increased MCP-1 production, loss of claudin-1 tight junctions, and trans-epidermal leakage with TNF-α, IL-4, and IL-13 stimulation, with all parameters reduced by lipid pre-treatment. These findings suggest that M. pyrifera lipids have anti-inflammatory and barrier-protective effects on keratinocytes, which may be beneficial for the treatment of atopic dermatitis or other skin conditions.

Mitochondrial dynamics and metabolism across skin cells: implications for skin homeostasis and aging

Aging of human skin is a complex process leading to a decline in homeostasis and regenerative potential of this tissue. Mitochondria are important cell organelles that have a crucial role in several cellular mechanisms such as energy production and free radical maintenance. However, mitochondrial metabolism as well as processes of mitochondrial dynamics, biogenesis, and degradation varies considerably among the different types of cells that populate the skin. Disturbed mitochondrial function is known to promote aging and inflammation of the skin, leading to impairment of physiological skin function and the onset of skin pathologies. In this review, we discuss the essential role of mitochondria in different skin cell types and how impairment of mitochondrial morphology, physiology, and metabolism in each of these cellular compartments of the skin contributes to the process of skin aging.

Artificial Skin Therapies; Strategy for Product Development

Significance: Tissue-engineered artificial skin for clinical reconstruction can be regarded as an established practice. Bi-layered skin equivalents are available as established allogenic or autologous therapy, and various acellular skin replacements can support tissue repair. Moreover, there is considerable commonality between the skin and other soft tissue reconstruction products. This article presents an attempt to create a comprehensive global landscape review of advanced replacement materials and associated strategies for skin and soft tissue reconstruction. Recent Advances: There has been rapid growth in the number of commercial and pre-commercial products over the past decade. In this survey, 263 base products for advanced skin therapy have been identified, across 8 therapeutic categories, giving over 350 products in total. The largest market is in the United States, followed by the E.U. zone. However, despite these advances, and the investment of resources in each product development, there are key issues concerning the clinical efficacy, cost-benefit of products, and clinical impact. Each therapeutic strategy has relative merits and limitations. Critical Issues: A critical consideration in developing and evaluating products is the therapeutic modality, associated regulatory processes, and the potential for clinical adoption geographically, determined by regulatory territory, intellectual property, and commercial distribution factors. The survey identifies an opportunity for developments that improve basic efficacy or cost-benefit. Future Directions: The economic pressures on health care systems, compounded by the demands of our increasingly ageing population, and the imperative to distribute effective health care, create an urgent global need for effective and affordable products.

Nano-Enabled Antivirals for Overcoming Antibody Escaped Mutations Based SARS-CoV-2 Waves

This review discusses receptor-binding domain (RBD) mutations related to the emergence of various SARS-CoV-2 variants, which have been highlighted as a major cause of repetitive clinical waves of COVID-19. Our perusal of the literature reveals that most variants were able to escape neutralizing antibodies developed after immunization or natural exposure, pointing to the need for a sustainable technological solution to overcome this crisis. This review, therefore, focuses on nanotechnology and the development of antiviral nanomaterials with physical antagonistic features of viral replication checkpoints as such a solution. Our detailed discussion of SARS-CoV-2 replication and pathogenesis highlights four distinct checkpoints, the S protein (ACE2 receptor coupling), the RBD motif (ACE2 receptor coupling), ACE2 coupling, and the S protein cleavage site, as targets for the development of nano-enabled solutions that, for example, prevent viral attachment and fusion with the host cell by either blocking viral RBD/spike proteins or cellular ACE2 receptors. As proof of this concept, we highlight applications of several nanomaterials, such as metal and metal oxide nanoparticles, carbon-based nanoparticles, carbon nanotubes, fullerene, carbon dots, quantum dots, polymeric nanoparticles, lipid-based, polymer-based, lipid-polymer hybrid-based, surface-modified nanoparticles that have already been employed to control viral infections. These nanoparticles were developed to inhibit receptor-mediated host-virus attachments and cell fusion, the uncoating of the virus, viral gene expression, protein synthesis, the assembly of progeny viral particles, and the release of the virion. Moreover, nanomaterials have been used as antiviral drug carriers and vaccines, and nano-enabled sensors have already been shown to enable fast, sensitive, and label-free real-time diagnosis of viral infections. Nano-biosensors could, therefore, also be useful in the remote testing and tracking of patients, while nanocarriers probed with target tissue could facilitate the targeted delivery of antiviral drugs to infected cells, tissues, organs, or systems while avoiding unwanted exposure of non-target tissues. Antiviral nanoparticles can also be applied to sanitizers, clothing, facemasks, and other personal protective equipment to minimize horizontal spread. We believe that the nanotechnology-enabled solutions described in this review will enable us to control repeated SAR-CoV-2 waves caused by antibody escape mutations.

Guanidinylated/PEGylated chitosan in the bioink promotes the formation of multi-layered keratinocytes in a human skin equivalent

The biological differences of skin between rodent and human beings and the strong appeal to replace the experimental animals have led to the development of alternative models with structures similar to the real human skin. Keratinocytes cultured in vitro on conventional dermal scaffolds tend to form monolayer rather than multi-layer epithelial tissue architectures. How to construct human skin or epidermal equivalents with multi-layered keratinocytes similar to real human epidermis remains one of the greatest challenges. Herein, a human skin equivalent with multi-layered keratinocytes was constructed by 3D bioprinting fibroblasts and subsequent culturing epidermal keratinocytes. Biocompatible guanidinylated/PEGylated chitosan (GPCS) was used as the main component of bioink to 3D bioprint tissue-engineered dermis. The function of GPCS to promote HaCat cell proliferation and connection was confirmed at the genetic, cellular, and histological levels. Compared with the skin tissues with mono-layered keratinocytes engineered with collagen and gelatin, adding GPCS in the bioink generated tissue-engineered human skin equivalents with multi-layered keratinocytes. Such human skin equivalents could be alternative models for biomedical, toxicological, and pharmaceutical research.

Technology platform for facile handling of 3D hydrogel cell culture scaffolds

Hydrogels are used extensively as cell-culture scaffolds for both 2D and 3D cell cultures due to their biocompatibility and the ease in which their mechanical and biological properties can be tailored to mimic natural tissue. The challenge when working with hydrogel-based scaffolds is in their handling, as hydrogels that mimic e.g. brain tissue, are both fragile and brittle when prepared as thin (sub-mm) membranes. Here, we describe a method for facile handling of thin hydrogel cell culture scaffolds by molding them onto a polycaprolactone (PCL) mesh support attached to a commonly used Transwell set-up in which the original membrane has been removed. In addition to demonstrating the assembly of this set-up, we also show some applications for this type of biological membrane. A polyethylene glycol (PEG)-gelatin hydrogel supports cell adhesion, and the structures can be used for biological barrier models comprising either one or multiple hydrogel layers. Here, we demonstrate the formation of a tight layer of an epithelial cell model comprising MDCK cells cultured over 9 days by following the build-up of the transepithelial electrical resistances. Second, by integrating a pure PEG hydrogel into the PCL mesh, significant swelling is induced, which leads to the formation of a non-adherent biological scaffold with a large curvature that is useful for spheroid formation. In conclusion, we demonstrate the development of a handling platform for hydrogel cell culture scaffolds for easy integration with conventional measurement techniques and miniaturized organs-on-chip systems.

Advanced In Vitro Three-Dimensional Skin Models of Atopic Dermatitis

Atopic dermatitis (AD) is one of the most prevalent inflammatory skin diseases that is characterized by eczematous rashes, intense itching, dry skin, and sensitive skin. Although AD significantly impacts the quality of life and the number of patients keeps increasing, its pathological mechanism is still unknown because of its complexity. The importance of developing new in vitro three-dimensional (3D) models has been underlined in order to understand the mechanisms for the development of therapeutics since the limitations of 2D models or animal models have been repeatedly reported. Thus, the new in vitro AD models should not only be created in 3D structure, but also reflect the pathological characteristics of AD, which are known to be associated with Th2-mediated inflammatory responses, epidermal barrier disruption, increased dermal T-cell infiltration, filaggrin down-regulation, or microbial imbalance. In this review, we introduce various types of in vitro skin models including 3D culture methods, skin-on-a-chips, and skin organoids, as well as their applications to AD modeling for drug screening and mechanistic studies.

Chronic Wound Healing Models

In this paper, we review and analyze the commonly available wound healing models reported in the literature and discuss their advantages and issues, considering their relevance and translational potential to humans. Our analysis includes different in vitro and in silico as well as in vivo models and experimental techniques. We further explore the new technologies in the study of wound healing to provide an all encompassing review of the most efficient ways to proceed with wound healing experiments. We revealed that there is not one model of wound healing that is superior and can give translatable results to human research. Rather, there are many different models that have specific uses for studying certain processes or stages of wound healing. Our analysis suggests that when performing an experiment to assess stages of wound healing or different therapies to enhance healing, one must consider not only the species that will be used but also the type of model and how this can best replicate the physiology or pathophysiology in humans.

The Skin Microbiome: Current Landscape and Future Opportunities

Our skin is the largest organ of the body, serving as an important barrier against the harsh extrinsic environment. Alongside preventing desiccation, chemical damage and hypothermia, this barrier protects the body from invading pathogens through a sophisticated innate immune response and co-adapted consortium of commensal microorganisms, collectively termed the microbiota. These microorganisms inhabit distinct biogeographical regions dictated by skin physiology. Thus, it follows that perturbations to normal skin homeostasis, as occurs with ageing, diabetes and skin disease, can cause microbial dysbiosis and increase infection risk. In this review, we discuss emerging concepts in skin microbiome research, highlighting pertinent links between skin ageing, the microbiome and cutaneous repair. Moreover, we address gaps in current knowledge and highlight key areas requiring further exploration. Future advances in this field could revolutionise the way we treat microbial dysbiosis associated with skin ageing and other pathologies.

Preparation of polyvinyl alcohol hydrogel containing chlorogenic acid microspheres and its evaluation for use in skin wound healing

Chlorogenic acid (CGA) is a phenolic compound widely found in plants. Several studies have shown that CGA possesses antioxidant, antibacterial, anti-inflammatory and wound healing properties. Because of their three-dimensional structure, good permeability, excellent biocompatibility and moisturizing properties, hydrogels are ideal candidates for wound dressing. The aim of the present study was to preparation and characterization of Polyvinyl alcohol (PVA) hydrogel containing CGA microspheres and evaluation its wound healing activity. The double-emulsion solvent evaporation technique was applied for preparing the CGA containing microspheres. The microspheres were characterized using scanning electron microscopy (SEM) and Fourier transformation infrared spectroscopy (FTIR) and subsequently incorporated in the structure of a PVA hydrogel. The effects of prepared hydrogel on NIH3T3 cell line viability were evaluated using MTT method and wound healing activity was investigated in full thickness wound model in rabbit. SEM images showed formation of homogenous CGA microspheres with diameters in the range of 1-2 μm, embedded in the porous structure of the hydrogel. Infra-red results indicated successful incorporation of CGA microspheres into PVA hydrogel. The NIH3T3 cell viability percentage in CGA 2.5% hydrogel treated group significantly (p < .05) increased after 24 h and 48 h comparing to control group. In vivo studies showed that CGA hydrogel significantly (p < .001) stimulated the rate of wounds closures. Histological studies revealed that administration of CGA hydrogel significantly increased epithelialization and production of collagen fibers compared to the control group. It can be concluded that the CGA microsphere loaded PVA hydrogel has the potential for wound healing.

Development of a Vascularized Human Skin Equivalent with Hypodermis for Photoaging Studies

Photoaging is an important extrinsic aging factor leading to altered skin morphology and reduced function. Prior work has revealed a connection between photoaging and loss of subcutaneous fat. Currently, primary models for studying this are in vivo (human samples or animal models) or in vitro models, including human skin equivalents (HSEs). In vivo models are limited by accessibility and cost, while HSEs typically do not include a subcutaneous adipose component. To address this, we developed an "adipose-vascular" HSE (AVHSE) culture method, which includes both hypodermal adipose and vascular cells. Furthermore, we tested AVHSE as a potential model for hypodermal adipose aging via exposure to 0.45 ± 0.15 mW/cm² 385 nm light (UVA). One week of 2 h daily UVA exposure had limited impact on epidermal and vascular components of the AVHSE, but significantly reduced adiposity by approximately 50%. Overall, we have developed a novel method for generating HSE that include vascular and adipose components and demonstrated potential as an aging model using photoaging as an example.

Targeting Hydroxybenzoic Acids to Mitochondria as a Strategy to Delay Skin Ageing: An In Vitro Approach

Targeting antioxidants to mitochondria is considered a promising strategy to prevent cellular senescence and skin ageing. In this study, we investigate whether four hydroxybenzoic acid-based mitochondria-targeted antioxidants (MitoBENs, MB1-4) could be used as potential active ingredients to prevent senescence in skin cells. Firstly, we evaluated the chemical stability, cytotoxicity, genotoxicity and mitochondrial toxicity of all compounds. We followed this by testing the antioxidant protective capacity of the two less toxic compounds on human skin fibroblasts. We then assessed the effects of the best hit on senescence, inflammation and mitochondrial remodeling on a 3D skin cell model, while also testing its mutagenic potential. Cytotoxicity and mitochondrial toxicity rankings were produced: MB3 < MB4 ≃ MB1 < MB2 and MB3 < MB1 < MB4 < MB2, respectively. These results suggest that pyrogallol-based compounds (MB2 and MB4) have lower cytotoxicity. The pyrogallol derivative, MB2, containing a 6-carbon spacer, showed a more potent antioxidant protective activity against hydrogen peroxide cytotoxicity. In a 3D skin cell model, MB2 also decreased transcripts related to senescence. In sum, MB2’s biological safety profile, good chemical stability and lack of mutagenicity, combined with its anti-senescence effect, converts MB2 into a good candidate for further development as an active ingredient for skin anti-ageing products.

Probiotic Adhesion to Skin Keratinocytes and Underlying Mechanisms

The effects of probiotics on the skin are not yet well understood. Their topical application and benefits derived thereafter have recently been investigated. Improvements in different skin disorders such as atopic dermatitis, acne, eczema, and psoriasis after their use have, however, been reported. One of the mechanisms through which such benefits are documented is by inhibiting colonization by skin pathogens. Bacterial adhesion is the first step for colonization to occur; therefore, to avoid pathogenic colonization, inhibiting adhesion is crucial. In this study, invasion and adhesion studies have been carried out using keratinocytes. These showed that Escherichia coli is not able to invade skin keratinocytes, but adhered to them. Lacticaseibacillus rhamnosus and Propioniferax innocua decreased the viable counts of the three pathogens under study. L. rhamnosus significantly inhibited S. aureus adhesion. P. innocua did not inhibit pathogenic bacteria adhesion, but when added simultaneously with S. aureus (competition assay) a significant adhesion reduction (1.12 ± 0.14 log10CFU/mL) was observed. Probiotic bacteria seem to use carbohydrates to adhere to the keratinocytes, while S. aureus uses proteins. Lacticaseibacillus rhamnosus showed promising results in pathogen inhibition in both in vitro and ex vivo experiments and can potentially be used as a reinforcement of conventional therapies for skin dysbiosis.

Evaluation of native and non-native biomaterials for engineering human skin tissue

A variety of human skin models have been developed for applications in regenerative medicine and efficacy studies. Typically, these employ matrix molecules that are derived from non-human sources along with human cells. Key limitations of such models include a lack of cellular and tissue microenvironment that is representative of human physiology for efficacy studies, as well as the potential for adverse immune responses to animal products for regenerative medicine applications. The use of recombinant extracellular matrix proteins to fabricate tissues can overcome these limitations. We evaluated animal- and non-animal-derived scaffold proteins and glycosaminoglycans for the design of biomaterials for skin reconstruction in vitro. Screening of proteins from the dermal-epidermal junction (collagen IV, laminin 5, and fibronectin) demonstrated that certain protein combinations when used as substrates increase the proliferation and migration of keratinocytes compared to the control (no protein). In the investigation of the effect of components from the dermal layer (collagen types I and III, elastin, hyaluronic acid, and dermatan sulfate), the primary influence on the viability of fibroblasts was attributed to the source of type I collagen (rat tail, human, or bovine) used as scaffold. Furthermore, incorporation of dermatan sulfate in the dermal layer led to a reduction in the contraction of tissues compared to the control where the dermal scaffold was composed primarily of collagen type I. This work highlights the influence of the composition of biomaterials on the development of complex reconstructed skin models that are suitable for clinical translation and in vitro safety assessment.

3D Bioprinting: An Enabling Technology to Understand Melanoma

Melanoma is a potentially fatal cancer with rising incidence over the last 50 years, associated with enhanced sun exposure and ultraviolet radiation. Its incidence is highest in people of European descent and the ageing population. There are multiple clinical and epidemiological variables affecting melanoma incidence and mortality, such as sex, ethnicity, UV exposure, anatomic site, and age. Although survival has improved in recent years due to advances in targeted and immunotherapies, new understanding of melanoma biology and disease progression is vital to improving clinical outcomes. Efforts to develop three-dimensional human skin equivalent models using biofabrication techniques, such as bioprinting, promise to deliver a better understanding of the complexity of melanoma and associated risk factors. These 3D skin models can be used as a platform for patient specific models and testing therapeutics.

Reconstruction of functional human epidermis equivalent containing 5%IPS-derived keratinocytes treated with mitochondrial stimulating plant extracts

Reconstructed human epidermis equivalents (RHE) have been developed as a clinical skin substitute and as the replacement for animal testing in both research and industry. KiPS, or keratinocytes derived from induced pluripotent stem cells (iPSCs) are frequently used to generate RHE. In this study, we focus on the mitochondrial performance of the KiPS derived from iPSCs obtained from two donors. We found that the KiPS derived from the older donor have more defective mitochondria. Treatment of these KiPS with a plant extract enriched in compounds known to protect mitochondria improved mitochondrial respiration and rendered them fully competent to derive high-quality RHE. Overall, our results suggest that improving mitochondrial function in KiPS is one of the key aspects to obtain a functional RHE and that our plant extracts can improve in this process.

Impact of microstructure on cell behavior and tissue mechanics in collagen and dermal decellularized extra-cellular matrices

Skin models are used for many applications such as research and development or grafting. Unfortunately, most lack a proper microenvironment producing poor mechanical properties and inaccurate extra-cellular matrix composition and organization. In this report we focused on mechanical properties, extra-cellular matrix organization and cell interactions in human skin samples reconstructed with pure collagen or dermal decellularized extra-cellular matrices (S-dECM) and compared them to native human skin. We found that Full-thickness S-dECM samples presented stiffness two times higher than collagen gel and similar to ex vivo human skin, and proved for the first time that keratinocytes also impact dermal mechanical properties. This was correlated with larger fibers in S-dECM matrices compared to collagen samples and with a differential expression of F-actin, vinculin and tenascin C between S-dECM and collagen samples. This is clear proof of the microenvironment's impact on cell behaviors and mechanical properties. STATEMENT OF SIGNIFICANCE: In vitro skin models have been used for a long time for clinical applications or in vitro knowledge and evaluation studies. However, most lack a proper microenvironment producing a poor combination of mechanical properties and appropriate biological outcomes, partly due to inaccurate extra-cellular matrix (ECM) composition and organization. This can lead to limited predictivity and weakness of skin substitutes after grafting. This study shows, for the first time, the importance of a complex and rich microenvironment on cell behaviors, matrix macro- and micro-organization and mechanical properties. The increased composition and organization complexity of dermal skin decellularized extra-cellular matrix populated with differentiated cells produces in vitro skin models closer to native human skin physiology.

The Role of Interstitial Fluid Pressure in Cerebral Porous Biomaterial Integration

Recent advances in biomaterials offer new possibilities for brain tissue reconstruction. Biocompatibility, provision of cell adhesion motives and mechanical properties are among the present main design criteria. We here propose a radically new and potentially major element determining biointegration of porous biomaterials: the favorable effect of interstitial fluid pressure (IFP). The force applied by the lymphatic system through the interstitial fluid pressure on biomaterial integration has mostly been neglected so far. We hypothesize it has the potential to force 3D biointegration of porous biomaterials. In this study, we develop a capillary hydrostatic device to apply controlled in vitro interstitial fluid pressure and study its effect during 3D tissue culture. We find that the IFP is a key player in porous biomaterial tissue integration, at physiological IFP levels, surpassing the known effect of cell adhesion motives. Spontaneous electrical activity indicates that the culture conditions are not harmful for the cells. Our work identifies interstitial fluid pressure at physiological negative values as a potential main driver for tissue integration into porous biomaterials. We anticipate that controlling the IFP level could narrow the gap between in vivo and in vitro and therefore decrease the need for animal screening in biomaterial design.

Burn Wound Healing: Clinical Complications, Medical Care, Treatment, and Dressing Types: The Current State of Knowledge for Clinical Practice

According to the World Health Organization (WHO), it is estimated that each year approximately 11 million people suffer from burn wounds, 180,000 of whom die because of such injuries. Regardless of the factors causing burns, these are complicated wounds that are difficult to heal and are associated with high mortality rates. Medical care of a burn patient requires a lot of commitment, experience, and multidirectional management, including surgical activities and widely understood pharmacological approaches. This paper aims to comprehensively review the current literature concerning burn wounds, including classification of burns, complications, medical care, and pharmacological treatment. We also overviewed the dressings (with an emphasis on the newest innovations in this field) that are currently used in medical practice to heal wounds.

Melanin decolorization by lysosome-related extract in Saccharomyces cerevisiae modified to overproduce glutathione peroxidase

All eukaryotes have lysosomes that contain hydrolytic enzymes, such as protease, that degrade waste materials and cellular fragments. As a cellular organelle, lysosomes function as the digestive system of the cell, serving both to degrade material taken up from outside the cell and to digest obsolete components of the cell itself. In a previous study, melanin compounds were bleached using lysosome-related organelle extract (LOE) in which glutathione peroxidase (GPX) contributed decisively to melanin decolorization. In this study, Saccharomyces cerevisiae was engineered to overproduce GPX, which increases the melanin color reduction activity of LOE. In addition, the peroxidase activity of the recombinant yeast was measured for each compartment. In spite of the modification to overexpress the GPX protein, with the peroxidase activity of the lysosome fraction specifically higher, the overall peroxidase activity of the cells remained constant. The overexpression of GPX2 among the GPX present in S. cerevisiae increased both the melanin-decolorization activity and the peroxidase activity of LOE. These results indicate that the peroxidase activity is related to the melanin decomposition and antioxidant enzymes such as GPX. In an artificial skin tissue test, the LOE extracted from the recombinant yeast was efficient in reducing the melanin. These results confirmed the enzyme's ability to penetrate corneous tissue, and they suggest the possibility of further development as a new whitening cosmetic. KEY POINTS: • Modification of Saccharomyces cerevisiae to overexpress glutathione peroxidase (GPX). • The lysosome fraction of the recombinant strain enhanced the decolorizing function. • The LOE penetrates the skin barrier and works effectively on artificial skin tissue.

Addressing Human Skin Ethnicity: Contribution of Tissue Engineering to the Development of Cosmetic Ingredients

Recent publications describe various skin disorders in relation to phototypes and aging. The highest phototypes (III to VI) are more sensitive to acne, with the appearance of dark spots due to the inflammation induced by Cutibacterium acnes (previously Propionibacterium acnes). Dryness with aging is due to a lower activity of specific enzymes involved in the maturation of lipids in the stratum corneum. To observe and understand these cutaneous issues, tissue engineering is a perfect tool. Since several years, pigmented epidermis with melanocytes derived from specific phototypes allow to develop in vitro models for biological investigations. In the present study, several models were developed to study various skin disorders associated with phototypes and aging. These models were also used to evaluate selected ingredients’ ability to decrease the negative effects of acne, inflammation, and cutaneous dryness. Hyperpigmentation was observed on our reconstructed pigmented epidermis after the application of C. acnes, and pollutant (PM10) application induced increased inflammatory cytokine release. Tissue engineering and molecular biology offer the capability to modify genetically cells to decrease the expression of targeted proteins. In our case, GCase was silenced to decrease the maturation of lipids and in turn modify the epidermal barrier function. These in vitro models assisted in the development of ethnic skin-focused cosmetic ingredients.

Green and Scalable Preparation of Colloidal Suspension of Lignin Nanoparticles and Its Application in Eco-friendly Sunscreen Formulations

Lignin nanoparticles (LNPs) are applied in several industrial applications. The nanoprecipitation of LNPs is fast and inexpensive but currently still limited to the use of hazardous organic solvents, making it difficult to apply them on a large scale. Here, we report a scalable nanoprecipitation procedure for the preparation of colloidal lignin nanoparticles (cLNPs) by the use of the green solvents dimethylisosorbide and isopropylidene glycerol. Irrespective of the experimental conditions, cLNPs showed higher UV absorbing properties and radical scavenging activity than parent LNPs and raw lignin. cLNPs were successively used in the preparation of eco-friendly sunscreen formulations (SPF 15, 30, and 50+, as evaluated by the COLIPA assay), which showed high UV-shielding activity even in the absence of synthetic boosters (microplastics) and physical filters (TiO2 and ZnO). Biological assays on human HaCaT keratinocytes and human skin equivalents demonstrated the absence of cytotoxicity and genotoxicity, associated with an optimal protection of the skin from UV-A damage.

Applications of Bacterial Cellulose as a Natural Polymer in Tissue Engineering

Choosing the material with the best regeneration potential and properties closest to that of the extracellular matrix is one of the main challenges in tissue engineering and regenerative medicine. Natural polymers, such as collagen, elastin, and cellulose, are widely used for this purpose in tissue engineering. Cellulose derived from bacteria has excellent mechanical properties, high hydrophilicity, crystallinity, and a high degree of polymerization and, therefore, can be used as scaffold/membrane for tissue engineering. In the current study, we reviewed the latest trends in the application of bacterial cellulose (BC) polymers as a scaffold in different types of tissue, including bone, vascular, skin, and cartilage. Also, we mentioned the biological and mechanical advantages and disadvantages of BC polymers. Given the data presented in this study, BC polymer could be suggested as a favorable natural polymer in the design of tissue scaffolds. Implementing novel composites that combine this polymer with other materials through modern or rapid prototyping methods can open up a great prospect in the future of tissue engineering and regenerative medicine.

Polysaccharide-based skin scaffolds with enhanced mechanical compatibility with native human skin

We report a custom-made technique to synthesize process-convenient skin scaffolds by tuning the mechanical properties of hydrogels based on a few naturally occurring polysaccharides to match the rheological properties of previously established benchmarks, i.e., the ex vivo native human skins. We studied the mechanical parameters using oscillatory shear rheology. At small strain amplitudes, the intrinsic elastic modulus showed an almost linear dependence in the middle and a changing rate profile at the two ends with concentration of the principal hydrogel component variant, i.e., kappa (κ)-carrageenan. At large strain amplitudes, the hydrogels demonstrated intercycle strain-softening behavior, the onset of which was directly proportional to the κ-carrageenan concentration. We observed a concentration match for the intrinsic elastic modulus of the benchmark within this sigmoidal curve fit. Contextually, we need to explore other potent polymeric hydrogel systems to achieve mechanical affinity in terms of multiple rheological parameters derived from both strain amplitude and angular frequency sweeps. Additionally, we carried out diffusion experiments to study caffeine permeation attributes. The hydrogels show improved barrier features with increasing κ-carrageenan concentration. In terms of the penetration flux and total cumulative amount of permeated caffeine, this enhanced mechanical adherence demonstrates comparable penetration features with the commercial 3D skin model.

Mechanical and Immunological Regulation in Wound Healing and Skin Reconstruction

In the past decade, a new frontier in scarless wound healing has arisen because of significant advances in the field of wound healing realised by incorporating emerging concepts from mechanobiology and immunology. The complete integumentary organ system (IOS) regeneration and scarless wound healing mechanism, which occurs in specific species, body sites and developmental stages, clearly shows that mechanical stress signals and immune responses play important roles in determining the wound healing mode. Advances in tissue engineering technology have led to the production of novel human skin equivalents and organoids that reproduce cell–cell interactions with tissue-scale tensional homeostasis, and enable us to evaluate skin tissue morphology, functionality, drug response and wound healing. This breakthrough in tissue engineering has the potential to accelerate the understanding of wound healing control mechanisms through complex mechanobiological and immunological interactions. In this review, we present an overview of recent studies of biomechanical and immunological wound healing and tissue remodelling mechanisms through comparisons of species- and developmental stage-dependent wound healing mechanisms. We also discuss the possibility of elucidating the control mechanism of wound healing involving mechanobiological and immunological interaction by using next-generation human skin equivalents.

Human pluripotent stem cells: An alternative for 3D in vitro modelling of skin disease

To effectively study the skin and its pathology, various platforms have been used to date, with in vitro 3D skin models being considered the future gold standard. These models have generally been engineered from primary cell lines. However, their short life span leading to the use of various donors, imposes issues with genetic variation. Human pluripotent stem cell (hPSC)-technology holds great prospects as an alternative to the use of primary cell lines to study the pathophysiology of human skin diseases. This is due to their potential to generate an unlimited number of genetically identical skin models that closely mimic the complexity of in vivo human skin. During the past decade, researchers have therefore started to use human embryonic and induced pluripotent stem cells (hESC/iPSC) to derive skin resident-like cells and components. These have subsequently been used to engineer hPSC-derived 3D skin models. In this review, we focus on the advantages, recent developments, and future perspectives in using hPSCs as an alternative cell source for modelling human skin diseases in vitro.

Utilization of patterned bioprinting for heterogeneous and physiologically representative reconstructed epidermal skin models

Organotypic skin tissue models have decades of use for basic research applications, the treatment of burns, and for efficacy/safety evaluation studies. The complex and heterogeneous nature of native human skin however creates difficulties for the construction of physiologically comparable organotypic models. Within the present study, we utilized bioprinting technology for the controlled deposition of separate keratinocyte subpopulations to create a reconstructed epidermis with two distinct halves in a single insert, each comprised of a different keratinocyte sub-population, in order to better model heterogonous skin and reduce inter-sample variability. As an initial proof-of-concept, we created a patterned epidermal skin model using GPF positive and negative keratinocyte subpopulations, both printed into 2 halves of a reconstructed skin insert, demonstrating the feasibility of this approach. We then demonstrated the physiological relevance of this bioprinting technique by generating a heterogeneous model comprised of dual keratinocyte population with either normal or low filaggrin expression. The resultant model exhibited a well-organized epidermal structure with each half possessing the phenotypic characteristics of its constituent cells, indicative of a successful and stable tissue reconstruction. This patterned skin model aims to mimic the edge of lesions as seen in atopic dermatitis or ichthyosis vulgaris, while the use of two populations within a single insert allows for paired statistics in evaluation studies, likely increasing study statistical power and reducing the number of models required per study. This is the first report of human patterned epidermal model using a predefined bioprinted designs, and demonstrates the relevance of bioprinting to faithfully reproduce human skin microanatomy.

Environmental toxicology wars: Organ-on-a-chip for assessing the toxicity of environmental pollutants

Environmental pollution is a widespread problem, which has seriously threatened human health and led to an increase of human diseases. Therefore, it is critical to evaluate environmental pollutants quickly and efficiently. Because of obvious inter-species differences between animals and humans, and lack of physiologically-relevant microenvironment, animal models and in vitro two-dimensional (2D) models can not accurately describe toxicological effects and predicting actual in vivo responses. To make up the limitations of conventional environmental toxicology screening, organ-on-a-chip (OOC) systems are increasingly developing. OOC systems can provide a well-organized architecture with comparable to the complex microenvironment in vivo and generate realistic responses to environmental pollutants. The feasibility, adjustability and reliability of OCC systems make it possible to offer new opportunities for environmental pollutants screening, which can study their metabolism, collective response, and fate in vivo. Further progress can address the challenges to make OCC systems better investigate and evaluate environmental pollutants with high predictive power.

A comparison of the in vitro permeation of 3-O-ethyl-l-ascorbic acid in human skin and in a living skin equivalent (LabSkin™)

OBJECTIVES

The safety assessment of personal care products often entails determining dermal absorption of their ingredients. Such experiments are typically performed in human or animal skin in vitro; however, ethical and safety considerations are associated with obtaining these tissues. Several human skin equivalent models (HSEs) have been developed as alternatives to human tissue. The barrier function of such models however, is normally less developed than human skin. Here, we examine the permeability of the HSE LabSkin^TM to a model compound, 3-O-ethyl-l-ascorbic acid (EA) compared with human skin.

METHODS

Skin uptake and permeation of EA was investigated in vitro using heat-separated human epidermis and LabSkin^TM . Finite dose (5 μL cm^-2 ) Franz-diffusion studies were conducted using 2 % (w/w) EA in a ternary solvent mixture comprising propylene glycol (PG), propylene glycol monolaurate (PGML), and isopropyl myristate (IPM). These excipients are commonly used in cosmetic products and they have been reported to promote permeation of EA in a different model, namely porcine skin.

RESULTS

Permeation of EA through LabSkin^TM was evident from 2 h; however, EA permeation in human skin was not detected until 5 h. Similar amounts of EA permeated through the two membranes at time points 8, 10, 12 and 24 h (p > 0.05). The cumulative amounts of EA delivered through LabSkin^TM at 24 h were 41.3 ± 2.0 µg cm^-2 , corresponding to 55.1 ± 1.8 % of the applied dose. Similar amounts permeated across human skin, 49.4 ± 4.1 µg cm^-2 , accounting for 58.0 ± 4.2 % of the dose applied (p > 0.05).

CONCLUSION

The permeation of EA in LabSkin^TM compared well with results for human epidermis in terms of the permeation profiles and the cumulative amounts of EA that permeated. The data suggest that the skin barrier of the two models was similar with regard to their overall permeability to the hydrophilic active EA. The findings are promising for the use of LabSkin^TM as a surrogate for human skin in permeability testing. Future studies will focus on exploring the reproducibility and robustness of LabSkin^TM for delivery of other actives that span a range of physicochemical properties.

Facilitated self-assembly of a prevascularized dermal/epidermal collagen scaffold

Introduction: Resurfacing complex full thickness wounds requires free tissue transfer which creates donor site morbidity. We describe a method to fabricate a skin flap equivalent with a hierarchical microvascular network. Materials & methods: We fabricated a flap of skin-like tissue containing a hierarchical vascular network by sacrificing Pluronic^® F127 macrofibers and interwoven microfibers within collagen encapsulating human pericytes and fibroblasts. Channels were seeded with smooth muscle and endothelial cells. Constructs were topically seeded with keratinocytes. Results: After 28 days in culture, multiphoton microscopy revealed a hierarchical interconnected network of macro- and micro-vessels; larger vessels (>100 μm) were lined with a monolayer endothelial neointima and a subendothelial smooth muscle neomedia. Neoangiogenic sprouts formed in the collagen protodermis and pericytes self-assembled around both fabricated vessels and neoangiogenic sprouts. Conclusion: We fabricated a prevascularized scaffold containing a hierarchical 3D network of interconnected macro- and microchannels within a collagen protodermis subjacent to an overlying protoepidermis with the potential for recipient microvascular anastomosis.

Tissue-scale tensional homeostasis in skin regulates structure and physiological function

Tensional homeostasis is crucial for organ and tissue development, including the establishment of morphological and functional properties. Skin plays essential roles in waterproofing, cushioning and protecting deeper tissues by forming internal tension-distribution patterns, which involves aligning various cells, appendages and extracellular matrices (ECMs). The balance of traction force is thought to contribute to the formation of strong and pliable physical structures that maintain their integrity and flexibility. Here, by using a human skin equivalent (HSE), the horizontal tension-force balance of the dermal layer was found to clearly improve HSE characteristics, such as the physical relationship between cells and the ECM. The tension also promoted skin homeostasis through the activation of mechano-sensitive molecules such as ROCK and MRTF-A, and these results compared favourably to what was observed in tension-released models. Tension-induced HSE will contribute to analyze skin physiological functions regulated by tensional homeostasis as an alternative animal model.