1
|
Paniagua-Guerra LE, Terrones M, Ramos-Alvarado B. Effects of Moisture and Synthesis-Derived Contaminants on the Mechanical Properties of Graphene Oxide: A Molecular Dynamics Investigation. ACS APPLIED MATERIALS & INTERFACES 2022; 14:54924-54935. [PMID: 36459097 DOI: 10.1021/acsami.2c16161] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
This paper reports on the effects of the chemical composition of graphene oxide (GO) sheets on the mechanical properties of bulk GO. Three key factors were analyzed: (i) the oxygenated functional groups' concentration, (ii) the content of intersheet water (moisture), and (iii) the presence of residual contaminants observed from the synthesis of GO. Molecular dynamics simulations using the reactive force field ReaxFF were conducted to model tensile strength, indentation, and shear stress tests. The structural integrity of the carbon basal plane was the primary variable that determined mechanical behavior of GO slabs. Hydrogen-bond networks played an essential role in the tensile fracture mechanism, delaying the onset of fracture whenever strong hydrogen bonds existed in the intersheet space. The presence of interlayer sulfate ion contaminants negatively impacted the tensile strength, stiffness, and toughness of GO. Moreover, it was observed that intersheet sulfate ions improved the resistance to fracture of GO at low sulfur concentrations, while lower fracture strains were observed beyond a critical concentration. Alike the tensile stress findings, the indentation properties were determined by the integrity of the carbon basal plane. Our findings agree with experimental mechanical property measurements and reveal the importance of considering synthesis-derived contaminants in molecular models of GO.
Collapse
Affiliation(s)
- Luis E Paniagua-Guerra
- Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania16802, United States
| | - Mauricio Terrones
- Department of Physics, Department of Chemistry, Department of Material Science and Engineering and Center for 2-Dimensional and Layered Materials, The Pennsylvania State University, University Park, Pennsylvania16802, United States
- Research Initiative for Supra-Materials, Shinshu University, Nagano380-8553, Japan
| | - Bladimir Ramos-Alvarado
- Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania16802, United States
| |
Collapse
|
2
|
Champa-Bujaico E, García-Díaz P, Díez-Pascual AM. Machine Learning for Property Prediction and Optimization of Polymeric Nanocomposites: A State-of-the-Art. Int J Mol Sci 2022; 23:ijms231810712. [PMID: 36142623 PMCID: PMC9505448 DOI: 10.3390/ijms231810712] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2022] [Revised: 09/08/2022] [Accepted: 09/10/2022] [Indexed: 11/16/2022] Open
Abstract
Recently, the field of polymer nanocomposites has been an area of high scientific and industrial attention due to noteworthy improvements attained in these materials, arising from the synergetic combination of properties of a polymeric matrix and an organic or inorganic nanomaterial. The enhanced performance of those materials typically involves superior mechanical strength, toughness and stiffness, electrical and thermal conductivity, better flame retardancy and a higher barrier to moisture and gases. Nanocomposites can also display unique design possibilities, which provide exceptional advantages in developing multifunctional materials with desired properties for specific applications. On the other hand, machine learning (ML) has been recognized as a powerful predictive tool for data-driven multi-physical modelling, leading to unprecedented insights and an exploration of the system’s properties beyond the capability of traditional computational and experimental analyses. This article aims to provide a brief overview of the most important findings related to the application of ML for the rational design of polymeric nanocomposites. Prediction, optimization, feature identification and uncertainty quantification are presented along with different ML algorithms used in the field of polymeric nanocomposites for property prediction, and selected examples are discussed. Finally, conclusions and future perspectives are highlighted.
Collapse
Affiliation(s)
- Elizabeth Champa-Bujaico
- Universidad de Alcalá, Departamento de Teoría de la Señal y Comunicaciones, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| | - Pilar García-Díaz
- Universidad de Alcalá, Departamento de Teoría de la Señal y Comunicaciones, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| | - Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
- Correspondence:
| |
Collapse
|
3
|
PMMA-Based Nanocomposites for Odontology Applications: A State-of-the-Art. Int J Mol Sci 2022; 23:ijms231810288. [PMID: 36142201 PMCID: PMC9499310 DOI: 10.3390/ijms231810288] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2022] [Revised: 09/01/2022] [Accepted: 09/05/2022] [Indexed: 11/16/2022] Open
Abstract
Polymethyl methacrylate (PMMA), a well-known polymer of the methacrylate family, is extensively used in biomedicine, particularly in odontological applications including artificial teeth, dentures and denture bases, obturators, provisional or permanent crowns, and so forth. The exceptional PMMA properties, including aesthetics, inexpensiveness, simple manipulation, low density, and adjustable mechanical properties, make it a perfect candidate in the field of dentistry. However, it presents some deficiencies, including weakness regarding hydrolytic degradation, poor fracture toughness, and a lack of antibacterial activity. To further enhance its properties and solve these drawbacks, different approaches can be performed, including the incorporation of nanofillers. In this regard, different types of metallic nanoparticles, metal oxide nanofillers, and carbon-based nanomaterials have been recently integrated into PMMA matrices with the aim to reduce water absorption and improve their performance, namely their thermal and flexural properties. In this review, recent studies regarding the development of PMMA-based nanocomposites for odontology applications are summarized and future perspectives are highlighted.
Collapse
|
4
|
Advanced Carbon-Based Polymeric Nanocomposites for Forensic Analysis. Polymers (Basel) 2022; 14:polym14173598. [PMID: 36080673 PMCID: PMC9460265 DOI: 10.3390/polym14173598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2022] [Revised: 08/25/2022] [Accepted: 08/26/2022] [Indexed: 11/28/2022] Open
Abstract
Nanotechnology is a powerful tool and fast-growing research area in many novel arenas, ranging from biomedicine to engineering and energy storage. Nanotechnology has great potential to make a significant positive contribution in forensic science, which deals with the identification and investigation of crimes, finding relationships between pieces of evidence and perpetrators. Nano-forensics is related to the development of nanosensors for crime investigations and inspection of terrorist activity by analyzing the presence of illicit drugs, explosives, toxic gases, biological agents, and so forth. In this regard, carbon nanomaterials have huge potential for next-generation nanosensors due to their outstanding properties, including strength combined with flexibility, large specific surface area, high electrical conductivity, and little noise. Moreover, their combination with polymers can provide nanocomposites with novel and enhanced performance owed to synergy between the composite components. This review concisely recapitulates up-to-date advances in the development of polymer composites incorporating carbon-based nanomaterials for forensic science. The properties of the different carbon nanomaterials, several methods used to analyze functional polymeric nanocomposites, and their applications in forensic investigation are discussed. Furthermore, present challenges and forthcoming outlooks on the design of new polymer/carbon nanomaterial composites for crime prevention are highlighted.
Collapse
|
5
|
Díez-Pascual AM. Carbon-Based Nanomaterials 3.0. Int J Mol Sci 2022; 23:ijms23169321. [PMID: 36012582 PMCID: PMC9408955 DOI: 10.3390/ijms23169321] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Accepted: 08/17/2022] [Indexed: 11/16/2022] Open
Abstract
Carbon-based nanomaterials are currently attracting a lot of interest in many fields, ranging from medicine and biotechnology to electronics, energy storage, and sensing applications [...]
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| |
Collapse
|
6
|
Hunter N, Karamati A, Xie Y, Lin H, Wang X. Laser photoreduction of graphene aerogel microfibers: dynamic electrical and thermal behaviors. Chemphyschem 2022; 23:e202200417. [PMID: 35947105 PMCID: PMC10087394 DOI: 10.1002/cphc.202200417] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2022] [Revised: 08/01/2022] [Indexed: 11/08/2022]
Abstract
This work reports the dynamic behaviors of graphene aerogel (GA) microfibers during and after continuous wave (CW) laser photoreduction. The reduction results in a one-order of magnitude increase in the electrical conductivity. The experimental results reveal the exact mechanisms of photoreduction as it occurs: immediate photochemical removal of oxygen functional groups causing a sharp decrease in electrical resistance and subsequent laser heating that facilitates thermal rearrangement of GO sheets towards more graphene-like domains. X-ray and Raman spectroscopy analysis confirm that photoreduction removes virtually all oxygen and nitrogen containing functional groups. Interestingly, a dynamic period immediately following the end of laser exposure shows a slow, gradual increase in electrical resistance, suggesting that a proportion of the electrical conductivity enhancement from photoreduction is not permanent. A two-part experiment monitoring the resistance changes in real-time before and after photoreduction is conducted to investigate this critical period. The thermal diffusivity evolution of the microfiber is tracked and shows an improvement of 277% after all photoreduction experiments. A strong linear coherency between thermal diffusivity and electrical conductivity is also uncovered. This is the first known work to explore both the dynamic electrical and thermal evolution of a GO-based aerogel during and after photoreduction.
Collapse
Affiliation(s)
- Nicholas Hunter
- Iowa State University of Science and Technology: Iowa State University, Mechanical Engineering, 1915 Scholl Road, 50011, Ames, CHINA
| | - Amin Karamati
- Iowa State University of Science and Technology: Iowa State University, Mechanical Engineering, 1915 Scholl Road, 50011, Ames, UNITED STATES
| | - Yangsu Xie
- Shenzhen University, Chemistry and Environmental Engineering, College of Chemistry and Environmental Engineering, Shenzhen, CHINA
| | - Huan Lin
- Qingdao University of Technology, Environmental and Municipal Engineering, School of Environmental and Municipal Engineering, Qingdao, CHINA
| | - Xinwei Wang
- Iowa State University, 2025 Black Engr. Bldg., 50011, Ames, UNITED STATES
| |
Collapse
|
7
|
Díez-Pascual AM, Rahdar A. Graphene-Based Polymer Composites for Flexible Electronic Applications. MICROMACHINES 2022; 13:mi13071123. [PMID: 35888940 PMCID: PMC9317206 DOI: 10.3390/mi13071123] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 07/10/2022] [Accepted: 07/14/2022] [Indexed: 12/27/2022]
Abstract
Graphene-based nanomaterials have gained a lot of interest over the last years in flexible electronics due to their exceptional electrical, mechanical, and optoelectronic properties, as well as their potential of surface modification. Their flexibility and processability make them suitable for electronic devices that require bending, folding, and stretching, which cannot be fulfilled by conventional electronics. These nanomaterials can be assembled with various types of organic materials, including polymers, and biomolecules, to generate a variety of nanocomposites with greater stretchability and healability, higher stiffness, electrical conductivity, and exceptional thermal stability for flexible lighting and display technologies. This article summarizes the main characteristics and synthesis methods of graphene, its oxidized form graphene oxide (GO), and reduced GO derivative, as well as their corresponding polymeric composites, and provides a brief overview about some recent examples of these nanocomposites in flexible electronic applications, including electrodes for solar cells and supercapacitors, electronic textiles, and transistors.
Collapse
Affiliation(s)
- Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
- Correspondence:
| | - Abbas Rahdar
- Department of Physics, University of Zabol, Zabol P.O. Box 98613-35856, Iran;
| |
Collapse
|
8
|
Shah V, Bhaliya J, Patel GM, Deshmukh K. Advances in polymeric nanocomposites for automotive applications: A review. POLYM ADVAN TECHNOL 2022. [DOI: 10.1002/pat.5771] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Vraj Shah
- Department of Chemistry, School of Science ITM SLS Baroda University Vadodara India
| | - Jaydip Bhaliya
- Department of Chemistry, School of Science ITM SLS Baroda University Vadodara India
| | - Gautam M. Patel
- Department of Industrial Chemistry, Institute of Science & Technology for Advanced Studies & Research (ISTAR) CVM University India
| | - Kalim Deshmukh
- New Technologies ‐ Research Centre University of West Bohemia Plzeň Czech Republic
| |
Collapse
|
9
|
Alberti SAN, Schneider J, Müller-Plathe F. Mobility of Polymer Melts in a Regular Array of Carbon Nanotubes. J Chem Theory Comput 2022; 18:3285-3295. [PMID: 35616542 DOI: 10.1021/acs.jctc.1c01281] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
In polymer nanocomposites, mechanical properties essentially depend on the alignment of nanoparticles and polymers. In this work, we investigate an entangled polymer melt in a confinement computationally, in order to get an insight into the mobility behavior of the polymer chains. The confinement consists of nanotubes, arranged in a hexagonal array. We use dissipative particle dynamics, a fast, soft-core simulation method, and reintroduce entanglement dynamics via slip-springs. We observe a distinct influence of the confinement as diffusion is increased in the direction parallel to the nanotubes. Furthermore, we observe that an orientation of the polymers parallel to the nanotubes and chains are compressed in the direction orthogonal to their primitive path. The diffusion parallel to the nanotubes increases further as we increase the nanotube volume fraction in our systems. Moreover, we investigate the slip-spring distribution in the proximity of the nanotube surfaces of our fast and simple slip-spring model, which we find to coincide with results reported for more sophisticated and expensive methods. Our DPD model shows potential applicability to a wide range of polymer nanocomposites while preserving reptation behavior, which is typically lost due to the use of soft-core models.
Collapse
Affiliation(s)
- Simon A N Alberti
- Eduard-Zintl-Institute of Inorganic and Physical Chemistry and Profile Area Thermofluids and Interfaces, Technical University of Darmstadt, Alarich-Weiss-Strasse 8, D-64287 Darmstadt, Germany
| | - Jurek Schneider
- Eduard-Zintl-Institute of Inorganic and Physical Chemistry and Profile Area Thermofluids and Interfaces, Technical University of Darmstadt, Alarich-Weiss-Strasse 8, D-64287 Darmstadt, Germany
| | - Florian Müller-Plathe
- Eduard-Zintl-Institute of Inorganic and Physical Chemistry and Profile Area Thermofluids and Interfaces, Technical University of Darmstadt, Alarich-Weiss-Strasse 8, D-64287 Darmstadt, Germany
| |
Collapse
|
10
|
Díez-Pascual AM. Graphene-Based Polymer Nanocomposites: Recent Advances. Polymers (Basel) 2022; 14:2102. [PMID: 35631984 PMCID: PMC9147770 DOI: 10.3390/polym14102102] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2022] [Accepted: 05/17/2022] [Indexed: 02/05/2023] Open
Abstract
Carbon-based nanomaterials are currently attracting a great deal of interest due to their unique chemical, optical, and electronic properties, which make them suitable for a broad range of uses, including supercapacitors, solar cells, fuel cells, lithium batteries, biomedicine, and so forth [...].
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| |
Collapse
|
11
|
Velasco Davoise L, Peña Capilla R, Díez-Pascual AM. Assessment of the Refractive Index and Extinction Coefficient of Graphene-Poly(3-hexylthiophene) Nanocomposites. Polymers (Basel) 2022; 14:polym14091828. [PMID: 35566999 PMCID: PMC9103999 DOI: 10.3390/polym14091828] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2022] [Revised: 04/23/2022] [Accepted: 04/26/2022] [Indexed: 02/01/2023] Open
Abstract
Poly(3-hexylthiophene) (P3HT) is one of the most attractive polymeric donor materials used in organic solar cells because of its high electrical conductivity and solubility in various solvents. However, its carrier mobility is low when compared to that of inorganic semiconductors; hence, the incorporation of appropriate nanomaterials to improve its electrical mobility and optical properties are pursued. In this work, a review of the changes in electrical conductivity, bandgap, hole collection properties and carrier mobility of P3HT when adding graphene (G) is presented. The main aim is to assess how the addition of different G contents influences the optical constants: refractive index (n) and extinction coefficient (k). The values of n and k as a function of the wavelength for six P3HT/G nanocomposites with G loadings in the range of 0.1-5 wt% have been fitted to two different models, Forouhi Bloomer and Cauchy, showing very good agreement between the experimental and the theoretical values. Furthermore, a rule of mixtures was successfully applied to calculate n using mass fraction instead of volume fraction, with errors lower than 6% for all the nanocomposites studied.
Collapse
Affiliation(s)
- Lara Velasco Davoise
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain;
| | - Rafael Peña Capilla
- Universidad de Alcalá, Departamento de Teoría de la Señal y Comunicaciones, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain;
| | - Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain;
- Correspondence:
| |
Collapse
|
12
|
Carbon-Based Polymer Nanocomposites for High-Performance Applications II. Polymers (Basel) 2022; 14:polym14050870. [PMID: 35267693 PMCID: PMC8912748 DOI: 10.3390/polym14050870] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2022] [Accepted: 02/15/2022] [Indexed: 12/10/2022] Open
Abstract
In the field of science and technology, carbon-based nanomaterials, such as carbon nanotubes (CNTs), graphene, graphene oxide, graphene quantum dots (GQDs), fullerenes, and so forth, are becoming very attractive for a wide number of applications [...].
Collapse
|
13
|
Fadil Y, Thickett SC, Agarwal V, Zetterlund PB. Synthesis of graphene-based polymeric nanocomposites using emulsion techniques. Prog Polym Sci 2022. [DOI: 10.1016/j.progpolymsci.2021.101476] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
14
|
Leakage Current Mitigation of Photovoltaic System Using Optimized Predictive Control for Improved Efficiency. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12020643] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
This paper proposes an optimized predictive control strategy to mitigate the potential leakage current of grid-tied photovoltaic (PV) systems to improve the lifespans of PV modules. In this work, the PV system is controlled with an optimized predictive control algorithm that selects the switching voltage vectors intelligently to reduce the number of computational burdens. Thus, it improves the dynamic performance of the overall system. This is achieved through a specific cost function that minimizes the change in common-mode voltage generated by the parasitic capacitance of PV modules. The proposed controller does not require any additional modulation schemes. Normalization techniques and weighting factors are incorporated to obtain improved results. The steady state and dynamic performance of the proposed control scheme is validated in this work through simulations and a 600 W experimental laboratory prototype.
Collapse
|
15
|
Witjaksono G, Junaid M, Khir MH, Ullah Z, Tansu N, Saheed MSBM, Siddiqui MA, Ba-Hashwan SS, Algamili AS, Magsi SA, Aslam MZ, Nawaz R. Effect of Nitrogen Doping on the Optical Bandgap and Electrical Conductivity of Nitrogen-Doped Reduced Graphene Oxide. Molecules 2021; 26:6424. [PMID: 34770833 PMCID: PMC8588234 DOI: 10.3390/molecules26216424] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2021] [Revised: 08/29/2021] [Accepted: 08/31/2021] [Indexed: 11/16/2022] Open
Abstract
Graphene as a material for optoelectronic design applications has been significantly restricted owing to zero bandgap and non-compatible handling procedures compared with regular microelectronic ones. In this work, nitrogen-doped reduced graphene oxide (N-rGO) with tunable optical bandgap and enhanced electrical conductivity was synthesized via a microwave-assisted hydrothermal method. The properties of the synthesized N-rGO were determined using XPS, FTIR and Raman spectroscopy, UV/vis, as well as FESEM techniques. The UV/vis spectroscopic analysis confirmed the narrowness of the optical bandgap from 3.4 to 3.1, 2.5, and 2.2 eV in N-rGO samples, where N-rGO samples were synthesized with a nitrogen doping concentration of 2.80, 4.53, and 5.51 at.%. Besides, an enhanced n-type electrical conductivity in N-rGO was observed in Hall effect measurement. The observed tunable optoelectrical characteristics of N-rGO make it a suitable material for developing future optoelectronic devices at the nanoscale.
Collapse
Affiliation(s)
- Gunawan Witjaksono
- BRI Institute, Jl. Harsono RM No. 2, Ragunan, Jakarta 12550, Passsar Minggu, Indonesia
| | - Muhammad Junaid
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
- Department of Electronic Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta 87300, Balochistan, Pakistan
| | - Mohd Haris Khir
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Zaka Ullah
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Nelson Tansu
- School of Electrical and Electronic Engineering, The University of Adelaide, Adelaide, SA 5005, Australia;
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA 5005, Australia
| | | | - Muhammad Aadil Siddiqui
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Saeed S. Ba-Hashwan
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Abdullah Saleh Algamili
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Saeed Ahmed Magsi
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Muhammad Zubair Aslam
- Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; (M.H.K.); (Z.U.); (M.A.S.); (S.S.B.-H.); (A.S.A.); (S.A.M.); (M.Z.A.)
| | - Rab Nawaz
- Department of Fundamental Science, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak, Malaysia; or
| |
Collapse
|
16
|
Díez-Pascual AM. State of the Art in the Antibacterial and Antiviral Applications of Carbon-Based Polymeric Nanocomposites. Int J Mol Sci 2021; 22:10511. [PMID: 34638851 PMCID: PMC8509077 DOI: 10.3390/ijms221910511] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2021] [Revised: 09/25/2021] [Accepted: 09/26/2021] [Indexed: 12/15/2022] Open
Abstract
The development of novel approaches to prevent bacterial infection is essential for enhancing everyday life. Carbon nanomaterials display exceptional optical, thermal, and mechanical properties combined with antibacterial ones, which make them suitable for diverse fields, including biomedical and food applications. Nonetheless, their practical applications as antimicrobial agents have not been fully explored yet, owing to their relatively poor dispersibility, expensiveness, and scalability changes. To solve these issues, they can be integrated within polymeric matrices, which also exhibit antimicrobial activity in some cases. This review describes the state of the art in the antibacterial applications of polymeric nanocomposites reinforced with 0D fullerenes, 1D carbon nanotubes (CNTs), and 2D graphene (G) and its derivatives such as graphene oxide (GO) and reduced graphene oxide (rGO). Given that a large number of such nanocomposites are available, only the most illustrative examples are described, and their mechanisms of antimicrobial activity are discussed. Finally, some applications of these antimicrobial polymeric nanocomposites are reviewed.
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| |
Collapse
|
17
|
Al Faruque MA, Syduzzaman M, Sarkar J, Bilisik K, Naebe M. A Review on the Production Methods and Applications of Graphene-Based Materials. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2414. [PMID: 34578730 PMCID: PMC8469961 DOI: 10.3390/nano11092414] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/08/2021] [Revised: 09/12/2021] [Accepted: 09/13/2021] [Indexed: 12/15/2022]
Abstract
Graphene-based materials in the form of fibres, fabrics, films, and composite materials are the most widely investigated research domains because of their remarkable physicochemical and thermomechanical properties. In this era of scientific advancement, graphene has built the foundation of a new horizon of possibilities and received tremendous research focus in several application areas such as aerospace, energy, transportation, healthcare, agriculture, wastewater management, and wearable technology. Although graphene has been found to provide exceptional results in every application field, a massive proportion of research is still underway to configure required parameters to ensure the best possible outcomes from graphene-based materials. Until now, several review articles have been published to summarise the excellence of graphene and its derivatives, which focused mainly on a single application area of graphene. However, no single review is found to comprehensively study most used fabrication processes of graphene-based materials including their diversified and potential application areas. To address this genuine gap and ensure wider support for the upcoming research and investigations of this excellent material, this review aims to provide a snapshot of most used fabrication methods of graphene-based materials in the form of pure and composite fibres, graphene-based composite materials conjugated with polymers, and fibres. This study also provides a clear perspective of large-scale production feasibility and application areas of graphene-based materials in all forms.
Collapse
Affiliation(s)
| | - Md Syduzzaman
- Nano/Micro Fiber Preform Design and Composite Laboratory, Department of Textile Engineering, Faculty of Engineering, Erciyes University, Kayseri 38039, Turkey; (M.S.); (K.B.)
- Department of Textile Engineering Management, Bangladesh University of Textiles, Dhaka 1208, Bangladesh
| | - Joy Sarkar
- Department of Textile Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh;
| | - Kadir Bilisik
- Nano/Micro Fiber Preform Design and Composite Laboratory, Department of Textile Engineering, Faculty of Engineering, Erciyes University, Kayseri 38039, Turkey; (M.S.); (K.B.)
| | - Maryam Naebe
- Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia;
| |
Collapse
|
18
|
Díez-Pascual AM. Development of Graphene-Based Polymeric Nanocomposites: A Brief Overview. Polymers (Basel) 2021; 13:2978. [PMID: 34503017 PMCID: PMC8433988 DOI: 10.3390/polym13172978] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2021] [Revised: 08/30/2021] [Accepted: 08/31/2021] [Indexed: 12/30/2022] Open
Abstract
Graphene (G) and its derivatives, such as graphene oxide (GO) and reduced GO (rGO), have outstanding electrical, mechanical, thermal, optical, and electrochemical properties, owed to their 2D structure and large specific surface area. Further, their combination with polymers leads to novel nanocomposites with enhanced structural and functional properties due to synergistic effects. Such nanocomposites are becoming increasingly useful in a wide variety of fields ranging from biomedicine to the electronics and energy storage applications. In this review, a brief introduction on the aforementioned G derivatives is presented, and different strategies to develop polymeric nanocomposites are described. Several functionalization methods including covalent and non-covalent approaches to increase their interaction with polymers are summarized, and selected examples are provided. Further, applications of this type of nanocomposites in the field of energy are discussed, including lithium-ion batteries, supercapacitors, transparent conductive electrodes, counter electrodes of dye-sensitized solar cells, and active layers of organic solar cells. Finally, the challenges and future outlook for G-based polymeric nanocomposites are discussed.
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain
| |
Collapse
|
19
|
Díez-Pascual AM. Environmentally Friendly Synthesis of Poly(3,4-Ethylenedioxythiophene): Poly(Styrene Sulfonate)/SnO 2 Nanocomposites. Polymers (Basel) 2021; 13:2445. [PMID: 34372048 PMCID: PMC8348352 DOI: 10.3390/polym13152445] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2021] [Revised: 07/21/2021] [Accepted: 07/22/2021] [Indexed: 11/30/2022] Open
Abstract
Conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is widely used for practical applications such as energy conversion and storage devices owing to its good flexibility, processability, high electrical conductivity, and superior optical transparency, among others. However, its hygroscopic character, short durability, and poor thermoelectric performance compared to inorganic counterparts has greatly limited its high-tech applications. In this work, PEDOT:PSS/SnO2 nanocomposites have been prepared via a simple, low cost, environmentally friendly method without the use of organic solvents or compatibilizing agents. Their morphology, thermal, thermoelectrical, optical, and mechanical properties have been characterized. Electron microscopy analysis revealed a uniform dispersion of the SnO2 nanoparticles, and the Raman spectra revealed the existence of very strong SnO2-PEDOT:PSS interactions. The stiffness and strength of the matrix gradually increased with increasing SnO2 content, up to 120% and 65%, respectively. Moreover, the nanocomposites showed superior thermal stability (as far as 70 °C), improved electrical conductivity (up to 140%), and higher Seebeck coefficient (about 80% increase) than neat PEDOT:PSS. On the other hand, hardly any change in optical transparency was observed. These sustainable nanocomposites show considerably improved performance compared to commercial PEDOT:PSS, and can be highly useful for applications in energy storage, flexible electronics, thermoelectric devices, and related fields.
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain)
| |
Collapse
|
20
|
Díez-Pascual AM. Effect of Graphene Oxide on the Properties of Poly(3-Hydroxybutyrate- co-3-Hydroxyhexanoate). Polymers (Basel) 2021; 13:polym13142233. [PMID: 34300993 PMCID: PMC8309387 DOI: 10.3390/polym13142233] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/12/2021] [Revised: 07/01/2021] [Accepted: 07/05/2021] [Indexed: 12/28/2022] Open
Abstract
The main shortcomings of polyhydroxybutyrate (PHB), which is a biodegradable and biocompatible polymer used for biomedical and food packaging applications, are its low thermal stability, poor impact resistance and lack of antibacterial activity. This issue can be improved by blending with other biodegradable polymers such as polyhydroxyhexanoate to form poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), which is a copolymer with better impact strength and lower melting point. However, PHBHHx shows reduced stiffness than PHB and poorer barrier properties against moisture and gases, which is a drawback for use in the food industry. In this regard, novel biodegradable PHBHHx/graphene oxide (GO) nanocomposites have been prepared via a simple, cheap and environmentally friendly solvent casting method to enhance the mechanical properties and antimicrobial activity. The morphology, mechanical, thermal, barrier and antibacterial properties of the nanocomposites were assessed via several characterization methods to show the enhancement in the biopolymer properties. The stiffness and strength of the biopolymer were enhanced up to 40% and 28%, respectively, related to the strong matrix-nanofiller interfacial adhesion attained via hydrogen bonding interactions. Moreover, the nanocomposites showed superior thermal stability (as far as 40 °C), lower water uptake (up to 70%) and better gas and vapour barrier properties (about 45 and 35% reduction) than neat PHBHHx. They also displayed strong biocide action against Gram positive and Gram negative bacteria. These bio-based nanocomposites with antimicrobial activity offer new perspectives for the replacement of traditional petroleum-based synthetic polymers currently used for food packaging.
Collapse
Affiliation(s)
- Ana M Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, Alcalá de Henares, 28805 Madrid, Spain
| |
Collapse
|
21
|
Díez-Pascual AM, Luceño-Sánchez JA. Antibacterial Activity of Polymer Nanocomposites Incorporating Graphene and Its Derivatives: A State of Art. Polymers (Basel) 2021; 13:2105. [PMID: 34206821 PMCID: PMC8271513 DOI: 10.3390/polym13132105] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/09/2021] [Revised: 06/22/2021] [Accepted: 06/23/2021] [Indexed: 11/16/2022] Open
Abstract
The incorporation of carbon-based nanostructures into polymer matrices is a relevant strategy for producing novel antimicrobial materials. By using nanofillers of different shapes and sizes, and polymers with different characteristics, novel antimicrobial nanocomposites with synergistic properties can be obtained. This article describes the state of art in the field of antimicrobial polymeric nanocomposites reinforced with graphene and its derivatives such as graphene oxide and reduced graphene oxide. Taking into account the vast number of articles published, only some representative examples are provided. A classification of the different nanocomposites is carried out, dividing them into acrylic and methacrylic matrices, biodegradable synthetic polymers and natural polymers. The mechanisms of antimicrobial activity of graphene and its derivatives are also reviewed. Finally, some applications of these antimicrobial nanocomposites are discussed. We aim to enhance understanding in the field and promote further work on the development of polymer-based antimicrobial nanocomposites incorporating graphene-based nanomaterials.
Collapse
Affiliation(s)
- Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona, Km. 33.6, 28805 Alcalá de Henares, Madrid, Spain;
| | | |
Collapse
|
22
|
Graphene nanoplatelets/organic wood dust hybrid composites: physical, mechanical and thermal characterization. IRANIAN POLYMER JOURNAL 2021. [DOI: 10.1007/s13726-021-00946-5] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
23
|
Burgos-Mármol JJ, Patti A. Molecular Dynamics of Janus Nanodimers Dispersed in Lamellar Phases of a Block Copolymer. Polymers (Basel) 2021; 13:1524. [PMID: 34065148 PMCID: PMC8126030 DOI: 10.3390/polym13091524] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 05/02/2021] [Accepted: 05/03/2021] [Indexed: 12/29/2022] Open
Abstract
We investigate structural and dynamical properties of Janus nanodimers (NDs) dispersed in lamellar phases of a diblock copolymer. By performing molecular dynamics simulations, we show that an accurate tuning of the interactions between NDs and copolymer blocks can lead to a close control of NDs' space distribution and orientation. In particular, NDs are preferentially found within the lamellae if enthalpy-driven forces offset their entropic counterpart. By contrast, when enthalpy-driven forces are not significant, the distribution of NDs, preferentially observed within the inter-lamellar spacing, is mostly driven by excluded-volume effects. Not only does the degree of affinity between host and guest species drive the NDs' distribution in the polymer matrix, but it also determines their space orientation. In turn, these key structural properties influence the long-time dynamics and the ability of NDs to diffuse through the polymer matrix.
Collapse
Affiliation(s)
- J. Javier Burgos-Mármol
- Institute of Systems, Molecular & Integrative Biology, University of Liverpool, Crown St., Liverpool L69 7ZB, UK;
| | - Alessandro Patti
- Department of Chemical Engineering and Analytical Science, The University of Manchester, The Mill. Sackville Street, Manchester M13 9PL, UK
| |
Collapse
|
24
|
Luceño-Sánchez JA, Charas A, Díez-Pascual AM. Effect of HDI-Modified GO on the Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene):Poly(Styrenesulfonate) Nanocomposite Films. Polymers (Basel) 2021; 13:1503. [PMID: 34067010 PMCID: PMC8124150 DOI: 10.3390/polym13091503] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/13/2021] [Revised: 04/26/2021] [Accepted: 05/04/2021] [Indexed: 11/16/2022] Open
Abstract
Composite films based on conducting polymers and carbon nanomaterials have attracted much attention for applications in various devices, such as chemical sensors, light-emitting diodes (LEDs), organic solar cells (OSCs), among others. Graphene oxide (GO) is an ideal filler for polymeric matrices due to its unique properties. However, GO needs to be functionalized to improve its solubility in common solvents and enable the processing by low-cost solution deposition methods. In this work, hexamethylene diisocyanate (HDI)-modified GO and its nanocomposites with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) were developed, and their morphology, thermal, electrical, thermoelectrical and mechanical performance were characterized. The influence of the HDI functionalization degree and concentration on the nanocomposite properties were assessed. The HDI-GO increased the crystallinity, lamella stacking and interchain coupling of PEDOT:PSS chains. A strong improvement in electrical conductivity, thermal stability, Young's modulus and tensile strength was found, showing an optimum combination at 2 wt% loading. Drop and spin casting techniques were applied onto different substrates, and the results from deposition tests were analyzed by atomic force microscopy (AFM) and UV-vis spectroscopy. A number of parameters influencing the depositions process, namely solvent nature, sonication conditions and ozone plasma treatment, have been explored. This study paves the way for further research on conducting polymer/modified GO nanocomposites to optimize their composition and properties (i.e., transparency) for use in devices such as OSCs.
Collapse
Affiliation(s)
- José A. Luceño-Sánchez
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain);
| | - Ana Charas
- Instituto de Telecomunicações, Instituto Superior Técnico, Av. Rovisco Pais, P-1049-001 Lisbon, Portugal;
| | - Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid-Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain);
| |
Collapse
|
25
|
Liu H, Lee J, Kang J. Improving the Sensitivity of an Organic Photodetector by Adding a Polar Solvent to the Hole-Transport Layer for Indirect X-ray Detection. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2021; 21:2992-2997. [PMID: 33653470 DOI: 10.1166/jnn.2021.19130] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
In this work, we investigated how the performance enhancement of an organic X-ray detector was improved by adding a dimethyl sulfoxide (DMSO) polar solvent to poly(3, 4-ethylene dioxythiophene):poly(4-styrene sulfonate) (PEDOT:PSS) hole-transport layer. The changes in the properties, such as surface roughness, chemical structure, sheet resistance, and absorbance, of the PEDOT:PSS film caused by the DMSO treatment were examined. The application of DMSO treatment lowered the resistance of the PEDOT:PSS film because of the removal of PSS and the chemical structure change after DMSO treatment, and thus the transport of light-induced carriers was increased. The organic detector treated with 10 vol% DMSO showed the highest collected current density (CCD) of 357.42 nA/cm² and highest sensitivity of 2.58 mA/Gy ·cm², which were 31.88% and 32.31% higher than the CCD and sensitivity of the detector without DMSO treatment.
Collapse
Affiliation(s)
- Hailiang Liu
- Department of Electronics and Electrical Engineering, Dankook University 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do, 16890, Korea
| | - Jehoon Lee
- Department of Electronics and Electrical Engineering, Dankook University 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do, 16890, Korea
| | - Jungwon Kang
- Department of Electronics and Electrical Engineering, Dankook University 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do, 16890, Korea
| |
Collapse
|
26
|
Gun'ko VM. Polymer Adsorbents vs. Functionalized Oxides and Carbons: Particulate Morphology and Textural and SurfaceCharacteristics. Polymers (Basel) 2021; 13:1249. [PMID: 33921494 PMCID: PMC8069040 DOI: 10.3390/polym13081249] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2021] [Revised: 04/08/2021] [Accepted: 04/09/2021] [Indexed: 01/15/2023] Open
Abstract
Various methods for morphological, textural, and structural characterization of polymeric, carbon, and oxide adsorbents have been developed and well described. However, there are ways to improve the quantitative information extraction from experimental data for describing complex sorbents and polymer fillers. This could be based not only on probe adsorption and electron microscopies (TEM, SEM) but also on small-angle X-ray scattering (SAXS), cryoporometry, relaxometry, thermoporometry, quasi-elastic light scattering, Raman and infrared spectroscopies, and other methods. To effectively extract information on complex materials, it is important to use appropriate methods to treat the data with adequate physicomathematical models that accurately describe the dependences of these data on pressure, concentration, temperature, and other parameters, and effective computational programs. It is shown that maximum accurate characterization of complex materials is possible if several complemented methods are used in parallel, e.g., adsorption and SAXS with self-consistent regularization procedures (giving pore size (PSD), pore wall thickness (PWTD) or chord length (CLD), and particle size (PaSD) distribution functions, the specific surface area of open and closed pores, etc.), TEM/SEM images with quantitative treatments (giving the PaSD, PSD, and PWTD functions), as well as cryo- and thermoporometry, relaxometry, X-ray diffraction, infrared and Raman spectroscopies (giving information on the behavior of the materials under different conditions).
Collapse
Affiliation(s)
- Volodymyr M Gun'ko
- Chuiko Institute of Surface Chemistry, 17 General Naumov Street, 03164 Kyiv, Ukraine
| |
Collapse
|
27
|
Sainz-Urruela C, Vera-López S, San Andrés MP, Díez-Pascual AM. Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review. Int J Mol Sci 2021; 22:3316. [PMID: 33804997 PMCID: PMC8037795 DOI: 10.3390/ijms22073316] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2021] [Revised: 03/20/2021] [Accepted: 03/22/2021] [Indexed: 02/07/2023] Open
Abstract
Over the last years, different nanomaterials have been investigated to design highly selective and sensitive sensors, reaching nano/picomolar concentrations of biomolecules, which is crucial for medical sciences and the healthcare industry in order to assess physiological and metabolic parameters. The discovery of graphene (G) has unexpectedly impulsed research on developing cost-effective electrode materials owed to its unique physical and chemical properties, including high specific surface area, elevated carrier mobility, exceptional electrical and thermal conductivity, strong stiffness and strength combined with flexibility and optical transparency. G and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the area of optical and electrochemical sensors. The presence of oxygenated functional groups makes GO nanosheets amphiphilic, facilitating chemical functionalization. G-based nanomaterials can be easily combined with different types of inorganic nanoparticles, including metals and metal oxides, quantum dots, organic polymers, and biomolecules, to yield a wide range of nanocomposites with enhanced sensitivity for sensor applications. This review provides an overview of recent research on G-based nanocomposites for the detection of bioactive compounds, providing insights on the unique advantages offered by G and its derivatives. Their synthesis process, functionalization routes, and main properties are summarized, and the main challenges are also discussed. The antioxidants selected for this review are melatonin, gallic acid, tannic acid, resveratrol, oleuropein, hydroxytyrosol, tocopherol, ascorbic acid, and curcumin. They were chosen owed to their beneficial properties for human health, including antibiotic, antiviral, cardiovascular protector, anticancer, anti-inflammatory, cytoprotective, neuroprotective, antiageing, antidegenerative, and antiallergic capacity. The sensitivity and selectivity of G-based electrochemical and fluorescent sensors are also examined. Finally, the future outlook for the development of G-based sensors for this type of biocompounds is outlined.
Collapse
Affiliation(s)
- Carlos Sainz-Urruela
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain); (C.S.-U.); (S.V.-L.); (M.P.S.)
| | - Soledad Vera-López
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain); (C.S.-U.); (S.V.-L.); (M.P.S.)
- Universidad de Alcalá, Instituto de Investigación Química Andrés M. del Río (IQAR), Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain)
| | - María Paz San Andrés
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain); (C.S.-U.); (S.V.-L.); (M.P.S.)
- Universidad de Alcalá, Instituto de Investigación Química Andrés M. del Río (IQAR), Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain)
| | - Ana M. Díez-Pascual
- Universidad de Alcalá, Facultad de Ciencias, Departamento de Química Analítica, Química Física e Ingeniería Química, Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain); (C.S.-U.); (S.V.-L.); (M.P.S.)
- Universidad de Alcalá, Instituto de Investigación Química Andrés M. del Río (IQAR), Ctra. Madrid‐Barcelona Km. 33.6, 28805 Alcalá de Henares, Madrid, España (Spain)
| |
Collapse
|
28
|
Hassan T, Salam A, Khan A, Khan SU, Khanzada H, Wasim M, Khan MQ, Kim IS. Functional nanocomposites and their potential applications: A review. JOURNAL OF POLYMER RESEARCH 2021. [DOI: 10.1007/s10965-021-02408-1] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
29
|
Graphene Oxides Derivatives Prepared by an Electrochemical Approach: Correlation between Structure and Properties. NANOMATERIALS 2020; 10:nano10122532. [PMID: 33348545 PMCID: PMC7766825 DOI: 10.3390/nano10122532] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 12/14/2020] [Accepted: 12/15/2020] [Indexed: 01/04/2023]
Abstract
Graphene oxide (GO) can be defined as a single monolayer of graphite with oxygen-containing functionalities such as epoxides, alcohols, and carboxylic acids. It is an interesting alternative to graphene for many applications due to its exceptional properties and feasibility of functionalization. In this study, electrochemically exfoliated graphene oxides (EGOs) with different amounts of surface groups, hence level of oxidation, were prepared by an electrochemical two-stage approach using graphite as raw material. A complete characterization of the EGOs was carried out in order to correlate their surface topography, interlayer spacing, defect content, and specific surface area (SSA) with their electrical, thermal, and mechanical properties. It has been found that the SSA has a direct relationship with the d-spacing. The EGOs electrical resistance decreases with increasing SSA while rises with increasing the D/G band intensity ratio in the Raman spectra, hence the defect content. Their thermal stability under both nitrogen and dry air atmospheres depends on both their oxidation level and defect content. Their macroscopic mechanical properties, namely the Young’s modulus and tensile strength, are influenced by the defect content, while no correlation was found with their SSA or interlayer spacing. Young moduli values as high as 54 GPa have been measured, which corroborates that the developed method preserves the integrity of the graphene flakes. Understanding the structure-property relationships in these materials is useful for the design of modified GOs with controllable morphologies and properties for a wide range of applications in electrical/electronic devices.
Collapse
|
30
|
Thermal Mechanical Properties of Graphene Nano-Composites with Kevlar-Nomex Copolymer: A Comparison of the Physical and Chemical Interactions. Polymers (Basel) 2020; 12:polym12112740. [PMID: 33227943 PMCID: PMC7699200 DOI: 10.3390/polym12112740] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2020] [Revised: 11/16/2020] [Accepted: 11/17/2020] [Indexed: 11/16/2022] Open
Abstract
This paper reports the preparation of Kevlar-Nomex copolymer nano-composites with exfoliated pristine and functionalized graphene sheets (Grs). The graphene oxide (GrO) platelets were amidized by the reaction of amine-terminated aramid (Ar) with the functional groups present on the GrO surface to prepare the nano-composites films with different loadings of GrO. Chemical changes involved during the oxidation and subsequent amidation were monitored by Raman, FTIR and XP spectroscopic analyses. Morphology of the composite films was studied by atomic force and scanning electron microscopies. Viscoelastic properties of the hybrid films were studied for their glass transition temperature (Tg) and storage modulus by dynamical mechanical thermal analysis (DMTA). A higher shift in glass transition temperature was obtained by chemically binding the aramid copolymer chains on the functionalized Gr sheets. The increase in tensile strength and modulus at various loadings of GrO are compared with the composites using pristine Gr. The effect of interfacial interactions between the matrix chains and the reinforcement on the properties of these hybrids have been explained.
Collapse
|
31
|
You SM, Tasi CK, Millet P, Doong RA. Electrochemically capacitive deionization of copper (II) using 3D hierarchically reduced graphene oxide architectures. Sep Purif Technol 2020. [DOI: 10.1016/j.seppur.2020.117368] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
32
|
Chen WC, Liu YT, Kuo SW. Highly Thermal Stable Phenolic Resin Based on Double-Decker-Shaped POSS Nanocomposites for Supercapacitors. Polymers (Basel) 2020; 12:polym12092151. [PMID: 32967220 PMCID: PMC7570050 DOI: 10.3390/polym12092151] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2020] [Revised: 09/15/2020] [Accepted: 09/19/2020] [Indexed: 12/21/2022] Open
Abstract
In this study we incorporated various amounts of a double-decker silsesquioxane (DDSQ) into phenolic/DDSQ hybrids, which we prepared from a bifunctionalized phenolic DDSQ derivative (DDSQ-4OH), phenol, and CH2O under basic conditions (with DDSQ-4OH itself prepared through hydrosilylation of nadic anhydride with DDSQ and subsequent reaction with 4-aminophenol). We characterized these phenolic/DDSQ hybrids using Fourier transform infrared spectroscopy; 1H, 13C, and 29Si nuclear magnetic resonance spectroscopy; X-ray photoelectron spectroscopy (XPS); and thermogravimetric analysis. The thermal decomposition temperature and char yield both increased significantly upon increasing the DDSQ content, with the DDSQ units providing an inorganic protection layer on the phenolic surface, as confirmed through XPS analyses. We obtained carbon/DDSQ hybrids from the phenolic/DDSQ hybrids after thermal curing and calcination at 900 °C; these carbon/DDSQ hybrids displayed electrochemical properties superior to those of previously reported counterparts.
Collapse
Affiliation(s)
- Wei-Cheng Chen
- Department of Materials and Optoelectronic Science, Center of Crystal Research, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan; (W.-C.C.); (Y.-T.L.)
| | - Yuan-Tzu Liu
- Department of Materials and Optoelectronic Science, Center of Crystal Research, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan; (W.-C.C.); (Y.-T.L.)
| | - Shiao-Wei Kuo
- Department of Materials and Optoelectronic Science, Center of Crystal Research, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan; (W.-C.C.); (Y.-T.L.)
- Department of Medicinal and Applied Chemistry, Kaohsiung Medical University, Kaohsiung 807, Taiwan
- Correspondence: ; Tel.: +886-7-525-4099
| |
Collapse
|
33
|
Shrestha UM, Han L, Saito T, Schweizer KS, Dadmun MD. Mechanism of Soft Nanoparticle Diffusion in Entangled Polymer Melts. Macromolecules 2020. [DOI: 10.1021/acs.macromol.0c00870] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Affiliation(s)
- Umesh M. Shrestha
- Department of Chemistry, University of Tennessee, Knoxville, Tennessee 37996, United States
| | - Lu Han
- Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| | - Tomonori Saito
- Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| | - Kenneth S. Schweizer
- Department of Materials Science, University of Illinois, Urbana, Illinois 61801, United States
- Department of Chemistry, University of Illinois, Urbana, Illinois 61801, United States
- Materials Research Laboratory, University of Illinois, Urbana, Illinois 61801, United States
| | - Mark D. Dadmun
- Department of Chemistry, University of Tennessee, Knoxville, Tennessee 37996, United States
- Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States
| |
Collapse
|
34
|
Ida S, Wilson P, Neppolian B, Sathish M, Mahammed Shaheer AR, Ravi P. Tuning the type of nitrogen on N-RGO supported on N-TiO 2 under ultrasonication/hydrothermal treatment for efficient hydrogen evolution - A mechanistic overview. ULTRASONICS SONOCHEMISTRY 2020; 64:104866. [PMID: 31983561 DOI: 10.1016/j.ultsonch.2019.104866] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2019] [Revised: 11/04/2019] [Accepted: 11/05/2019] [Indexed: 06/10/2023]
Abstract
Efficient hydrogen production through water splitting has been the challenging task to be achieved in the present context of energy crisis. Among the various catalysts employed, nitrogen doped Titanium dioxide/Reduced graphene oxide (N-TiO2/RGO) nanocomposite has been established to be a promising photocatalytic material for this purpose. However, nuances of doping nitrogen on TiO2 and the type of nitrogen (pyridinic, pyrrolic and graphitic) stabilized on RGO responsible for facilitating the H2 production has not yet been addressed mechanistically. In the present investigation, an attempt has been made to synthesise N-Titanium dioxide/N-Reduced graphene oxide (NTNG) nanocomposite under ultrasonication followed by hydrothermal treatment. A stainlesssteel ultrasonic bath, of 6.5 L tank size (LxBxH) 300 × 150 × 150 mm, was used for ultrasonic treatments. The transducers located at the bottom of the ultrasonic bath generate a frequency of 40 kHz with maximum power of 200 W. A mechanism has been proposed including the nuances of formation and the stabilisation of each type of nitrogen on N-RGO as a function of ultrasonication time. The present work supports the stabilization of a given type of nitrogen on RGO through keto enol tautomerism. XPS and FTIR studies have been undertaken to identify the different types of nitrogen doping and the presence of functional groups respectively. XRD, UV-Vis DRS and PL investigations have been made to establish morphological profile and band gap structure of the nanocomposite. It was observed that pyrrolic type nitrogen stabilized on N-RGO augments the efficiency of photocatalytic activity through hydrogen production by water splitting.
Collapse
Affiliation(s)
- S Ida
- Department of Chemistry, Madras Christian College (Autonomous), University of Madras, Chennai 600005, Tamil Nadu, India
| | - P Wilson
- Department of Chemistry, Madras Christian College (Autonomous), University of Madras, Chennai 600005, Tamil Nadu, India.
| | - B Neppolian
- SRM Research Institute, SRM University, Kattankulathur, Chennai 603203, Tamil Nadu, India
| | - M Sathish
- Functional Materials Division, CSIR-Central Electrochemical Research Institute, Karaikudi 630003, Tamilnadu, India
| | - A R Mahammed Shaheer
- SRM Research Institute, SRM University, Kattankulathur, Chennai 603203, Tamil Nadu, India
| | - P Ravi
- Functional Materials Division, CSIR-Central Electrochemical Research Institute, Karaikudi 630003, Tamilnadu, India
| |
Collapse
|
35
|
Díez-Pascual AM. Antibacterial Action of Nanoparticle Loaded Nanocomposites Based on Graphene and Its Derivatives: A Mini-Review. Int J Mol Sci 2020; 21:E3563. [PMID: 32443558 PMCID: PMC7278957 DOI: 10.3390/ijms21103563] [Citation(s) in RCA: 55] [Impact Index Per Article: 13.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2020] [Revised: 05/12/2020] [Accepted: 05/13/2020] [Indexed: 12/18/2022] Open
Abstract
Bacterial infections constitute a severe problem in various areas of everyday life, causing pain and death, and adding enormous costs to healthcare worldwide. Besides, they cause important concerns in other industries, such as cloth, food packaging, and biomedicine, among others. Despite the intensive efforts of academics and researchers, there is lack of a general solutions to restrict bacterial growth. Among the various approaches, the use of antibacterial nanomaterials is a very promising way to fight the microorganisms due to their high specific surface area and intrinsic or chemically incorporated antibacterial action. Graphene, a 2D carbon-based ultra-thin biocompatible nanomaterial with excellent mechanical, thermal, and electrical properties, and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), are highly suitable candidates for restricting microbial infections. However, the mechanisms of antimicrobial action, their cytotoxicity, and other issues remain unclear. This mini-review provides select examples on the leading advances in the development of antimicrobial nanocomposites incorporating inorganic nanoparticles and graphene or its derivatives, with the aim of providing a better understanding of the antibacterial properties of graphene-based nanomaterials.
Collapse
Affiliation(s)
- Ana María Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Institute of Chemistry Research “Andrés M. del Río” (IQAR), University of Alcalá, Ctra. Madrid-Barcelona, Km. 33.6, 28871 Alcalá de Henares, Madrid, Spain
| |
Collapse
|
36
|
Carbon-Based Polymer Nanocomposites for High-Performance Applications. Polymers (Basel) 2020; 12:polym12040872. [PMID: 32290251 PMCID: PMC7240536 DOI: 10.3390/polym12040872] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2020] [Accepted: 04/08/2020] [Indexed: 12/20/2022] Open
|
37
|
Díez-Pascual AM, Sainz-Urruela C, Vallés C, Vera-López S, San Andrés MP. Tailorable Synthesis of Highly Oxidized Graphene Oxides via an Environmentally-Friendly Electrochemical Process. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E239. [PMID: 32013166 PMCID: PMC7075238 DOI: 10.3390/nano10020239] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2019] [Revised: 01/19/2020] [Accepted: 01/27/2020] [Indexed: 12/11/2022]
Abstract
Graphene oxide (GO) is an attractive alternative to graphene for many applications due to its captivating optical, chemical, and electrical characteristics. In this work, GO powders with a different amount of surface groups were synthesized from graphite via an electrochemical two-stage process. Many synthesis conditions were tried to maximize the oxidation level, and comprehensive characterization of the resulting samples was carried out via elemental analysis, microscopies (TEM, SEM, AFM), X-ray diffraction, FT-IR and Raman spectroscopies as well as electrical resistance measurements. SEM and TEM images corroborate that the electrochemical process used herein preserves the integrity of the graphene flakes, enabling to obtain large, uniform and well exfoliated GO sheets. The GOs display a wide range of C/O ratios, determined by the voltage and time of each stage as well as the electrolyte concentration, and an unprecedented minimum C/O value was obtained for the optimal conditions. FT-IR evidences strong intermolecular interactions between neighbouring oxygenated groups. The intensity ratio of D/G bands in the Raman spectra is high for samples prepared using concentrated H2SO4 as an electrolyte, indicative of many defects. Furthermore, these GOs exhibit smaller interlayer spacing than that expected according to their oxygen content, which suggests predominant oxidation on the flake edges. Results point out that the electrical resistance is conditioned mostly by the interlayer distance and not simply by the C/O ratio. The tuning of the oxidation level is useful for the design of GOs with tailorable structural, electrical, optical, mechanical, and thermal properties.
Collapse
Affiliation(s)
- Ana María Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, University of Alcalá, Alcalá de Henares, 28805 Madrid, Spain (S.V.-L.); (M.P.S.)
- Institute of Chemistry Research, “Andrés M. del Río” (IQAR), University of Alcalá, Ctra. Madrid- Barcelona Km. 33.6, Alcalá de Henares, 28805 Madrid, Spain
| | - Carlos Sainz-Urruela
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, University of Alcalá, Alcalá de Henares, 28805 Madrid, Spain (S.V.-L.); (M.P.S.)
| | - Cristina Vallés
- Department of Materials and National Graphene Institute, University of Manchester, Oxford Road, Manchester M13 9PL, UK;
| | - Soledad Vera-López
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, University of Alcalá, Alcalá de Henares, 28805 Madrid, Spain (S.V.-L.); (M.P.S.)
- Institute of Chemistry Research, “Andrés M. del Río” (IQAR), University of Alcalá, Ctra. Madrid- Barcelona Km. 33.6, Alcalá de Henares, 28805 Madrid, Spain
| | - María Paz San Andrés
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, University of Alcalá, Alcalá de Henares, 28805 Madrid, Spain (S.V.-L.); (M.P.S.)
- Institute of Chemistry Research, “Andrés M. del Río” (IQAR), University of Alcalá, Ctra. Madrid- Barcelona Km. 33.6, Alcalá de Henares, 28805 Madrid, Spain
| |
Collapse
|
38
|
Nano-Level Damage Characterization of Graphene/Polymer Cohesive Interface under Tensile Separation. Polymers (Basel) 2019; 11:polym11091435. [PMID: 31480660 PMCID: PMC6780271 DOI: 10.3390/polym11091435] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2019] [Revised: 07/24/2019] [Accepted: 07/24/2019] [Indexed: 11/17/2022] Open
Abstract
The mechanical behavior of graphene/polymer interfaces in the graphene-reinforced epoxy nanocomposite is one of the factors that dictates the deformation and damage response of the nanocomposites. In this study, hybrid molecular dynamic (MD) and finite element (FE) simulations of a graphene/polymer nanocomposite are developed to characterize the elastic-damage behavior of graphene/polymer interfaces under a tensile separation condition. The MD results show that the graphene/epoxy interface behaves in the form of elastic-softening exponential regressive law. The FE results verify the adequacy of the cohesive zone model in accurate prediction of the interface damage behavior. The graphene/epoxy cohesive interface is characterized by normal stiffness, tensile strength, and fracture energy of 5 × 10−8 (aPa·nm−1), 9.75 × 10−10 (nm), 2.1 × 10−10 (N·nm−1) respectively, that is followed by an exponential regressive law with the exponent, α = 7.74. It is shown that the commonly assumed bilinear softening law of the cohesive interface could lead up to 55% error in the predicted separation of the interface.
Collapse
|
39
|
Luceño-Sánchez JA, Díez-Pascual AM. Grafting of Polypyrrole-3-carboxylic Acid to the Surface of Hexamethylene Diisocyanate-Functionalized Graphene Oxide. NANOMATERIALS (BASEL, SWITZERLAND) 2019; 9:E1095. [PMID: 31370134 PMCID: PMC6723346 DOI: 10.3390/nano9081095] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/19/2019] [Revised: 07/27/2019] [Accepted: 07/28/2019] [Indexed: 01/03/2023]
Abstract
A polypyrrole-carboxylic acid derivative (PPy-COOH) was covalently anchored on the surface of hexamethylene diisocyanate (HDI)-modified graphene oxide (GO) following two different esterification approaches: activation of the carboxylic acids of the polymer by carbodiimide, and conversion of the carboxylic groups to acyl chloride. Microscopic observations revealed a decrease in HDI-GO layer thickness for the sample prepared via the first strategy, and the heterogeneous nature of the grafted samples. Infrared and Raman spectroscopies corroborated the grafting success, demonstrating the emergence of a peak associated with the ester group. The yield of the grafting reactions (31% and 42%) was roughly calculated from thermogravimetric analysis, and it was higher for the sample synthesized via formation of the acyl chloride-functionalized PPy. The grafted samples showed higher thermal stability (~30 and 40 °C in the second decomposition stage) and sheet resistance than PPy-COOH. They also exhibited superior stiffness and strength both at 25 and 100 °C, and the reinforcing efficiency was approximately maintained at high temperatures. Improved mechanical performance was attained for the sample with higher grafting yield. The developed method is a valuable approach to covalently attach conductive polymers onto graphenic nanomaterials for application in flexible electronics, fuel cells, solar cells, and supercapacitors.
Collapse
Affiliation(s)
- José Antonio Luceño-Sánchez
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Alcalá University, 28805 Madrid, Spain
| | - Ana Maria Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Alcalá University, 28805 Madrid, Spain.
| |
Collapse
|
40
|
Díez-Pascual AM, Chen G. Selected Papers from the 1st International Online Conference on Nanomaterials. NANOMATERIALS 2019; 9:nano9071021. [PMID: 31319500 PMCID: PMC6669614 DOI: 10.3390/nano9071021] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Received: 07/01/2019] [Accepted: 07/12/2019] [Indexed: 12/12/2022]
Affiliation(s)
- Ana María Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, University of Alcalá, 28805 Alcalá de Henares, Madrid, Spain.
| | - Guanying Chen
- School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China.
| |
Collapse
|
41
|
Li S, Chen Y, He X, Mao X, Zhou Y, Xu J, Yang Y. Modifying Reduced Graphene Oxide by Conducting Polymer Through a Hydrothermal Polymerization Method and its Application as Energy Storage Electrodes. NANOSCALE RESEARCH LETTERS 2019; 14:226. [PMID: 31289953 PMCID: PMC6616605 DOI: 10.1186/s11671-019-3051-6] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2018] [Accepted: 06/17/2019] [Indexed: 05/27/2023]
Abstract
We report chemical in situ deposition of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT) on reduced graphene oxide (rGO) nanosheets through a simple hydrothermal polymerization method. The functional groups on graphene oxide (GO) were directly employed as an oxidant to trigger the polymerization of 3,4-ethylenedioxythiophene (EDOT), and the GO nanosheets were reduced into rGO accordingly in an aqueous environment. Well anchoring of ultrathin PEDOT on rGO through this oxidant-free method was confirmed by UV-Vis spectrum, FT-IR spectrum, SEM, and TEM analysis. The obvious enhancement of conductivity was observed after the covering of PEDOT on rGO, and this composite showed high conductivity about 88.5 S/cm. The electrochemical performance results revealed that rGO/PEDOT composite electrode exhibits high specific capacitance about 202.7 F/g. The good synergetic effect between PEDOT and rGO also makes sure highly stable reversibility of composite electrode during charging/discharging process, and more than 90% initial capacitance retains after 9000 times cycles. In addition, the electrode based on rGO/PEDOT deposited on the cotton fabric shows excellent flexible ability with the evidence that 98% of the initial capacitance of electrode maintained after three thousands of free bending, which shows promising energy storage performance for flexible devices. .
Collapse
Affiliation(s)
- Shiyuan Li
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| | - Yan Chen
- College of Optoelectronic Technology, University of Information Technology, Chengdu, 610225 People’s Republic of China
| | - Xin He
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| | - Xiling Mao
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| | - Yujiu Zhou
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| | - Jianhua Xu
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| | - Yajie Yang
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China (UESTC), Chengdu, 610054 People’s Republic of China
| |
Collapse
|
42
|
Zhong J, Ding Y, Gao F, Wen J, Zhou J, Zheng W, Shen L, Fu C, Wang B. Free volume correlation with electrical conductivity of polycarbonate/reduced graphene oxide nanocomposites studied by positron annihilation lifetime spectroscopy. J Appl Polym Sci 2019. [DOI: 10.1002/app.48207] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Jiang Zhong
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Yang Ding
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Fei Gao
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Jia Wen
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Jiyong Zhou
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Wenbin Zheng
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Liang Shen
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Changqing Fu
- Jiangxi Engineering Laboratory of Waterborne Coating, School of Chemistry and Chemical EngineeringJiangxi Science and Technology Normal University Nanchang 330013 People's Republic of China
| | - Bo Wang
- Key Laboratory of Nuclear Solid Physics, School of Physics and TechnologyWuhan University Wuhan 430072 People's Republic of China
| |
Collapse
|
43
|
The Effect of Hexamethylene Diisocyanate-Modified Graphene Oxide as a Nanofiller Material on the Properties of Conductive Polyaniline. Polymers (Basel) 2019; 11:polym11061032. [PMID: 31212625 PMCID: PMC6630901 DOI: 10.3390/polym11061032] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2019] [Revised: 06/06/2019] [Accepted: 06/07/2019] [Indexed: 11/17/2022] Open
Abstract
Conducting polymers like polyaniline (PANI) have gained a lot of interest due to their outstanding electrical and optoelectronic properties combined with their low cost and easy synthesis. To further exploit the performance of PANI, carbon-based nanomaterials like graphene, graphene oxide (GO) and their derivatives can be incorporated in a PANI matrix. In this study, hexamethylene diisocyanate-modified GO (HDI-GO) nanosheets with two different functionalization degrees have been used as nanofillers to develop high-performance PANI/HDI-GO nanocomposites via in situ polymerization of aniline in the presence of HDI-GO followed by ultrasonication and solution casting. The influence of the HDI-GO concentration and functionalization degree on the nanocomposite properties has been examined by scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile tests, zeta potential and four-point probe measurements. SEM analysis demonstrated a homogenous dispersion of the HDI-GO nanosheets that were coated by the matrix particles during the in situ polymerization. Raman spectra revealed the existence of very strong PANI-HDI-GO interactions via π-π stacking, H-bonding, and hydrophobic and electrostatic charge-transfer complexes. A steady enhancement in thermal stability and electrical conductivity was found with increasing nanofiller concentration, the improvements being higher with increasing HDI-GO functionalization level. The nanocomposites showed a very good combination of rigidity, strength, ductility and toughness, and the best equilibrium of properties was attained at 5 wt % HDI-GO. The method developed herein opens up a versatile route to prepare multifunctional graphene-based nanocomposites with conductive polymers for a broad range of applications including flexible electronics and organic solar cells.
Collapse
|
44
|
Díez-Pascual AM. Nanoparticle Reinforced Polymers. Polymers (Basel) 2019; 11:polym11040625. [PMID: 30960608 PMCID: PMC6523703 DOI: 10.3390/polym11040625] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2019] [Accepted: 04/01/2019] [Indexed: 01/14/2023] Open
Affiliation(s)
- Ana María Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Institute of Chemistry Research "Andrés M. del Río" (IQAR), University of Alcalá, Ctra. Madrid-Barcelona, Km. 33.6, 28871 Madrid, Spain.
| |
Collapse
|
45
|
Facile Preparation of Highly Conductive Poly(amide-imide) Composite Films beyond 1000 S m -1 through Ternary Blend Strategy. Polymers (Basel) 2019; 11:polym11030546. [PMID: 30960530 PMCID: PMC6473783 DOI: 10.3390/polym11030546] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2019] [Revised: 03/12/2019] [Accepted: 03/18/2019] [Indexed: 12/02/2022] Open
Abstract
Highly conductive thin films with suitable mechanical performances play a significant role in modern electronic industry. Herein, a series of ternary conductive polymer composites were fabricated by incorporating carbon black (CB) into binary conductive polymer composites of poly(amide-imide) (PAI) and polyaniline (PANI) to enhance their mechanical and conductive properties simultaneously. By varying the composition of PAI/PANI/CB ternary films, the conductivity enhanced by two orders of magnitude compared with the sum of PAI/PANI and PAI/CB binary conductive polymer composites, and a high conductivity of 1160 S m−1 was achieved. The improved conductivity is mainly because much more continuous conductive networks were constructed in the ternary conductive polymer composites. With the help of the unusual morphology, the tensile strength was also enhanced by more than 80% from 21 to 38 MPa. The origin for the improved morphology was discussed for further improvement.
Collapse
|
46
|
Luceño-Sánchez JA, Díez-Pascual AM, Peña Capilla R. Materials for Photovoltaics: State of Art and Recent Developments. Int J Mol Sci 2019; 20:E976. [PMID: 30813428 PMCID: PMC6412461 DOI: 10.3390/ijms20040976] [Citation(s) in RCA: 53] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2019] [Revised: 02/14/2019] [Accepted: 02/19/2019] [Indexed: 12/18/2022] Open
Abstract
In recent years, photovoltaic cell technology has grown extraordinarily as a sustainable source of energy, as a consequence of the increasing concern over the impact of fossil fuel-based energy on global warming and climate change. The different photovoltaic cells developed up to date can be classified into four main categories called generations (GEN), and the current market is mainly covered by the first two GEN. The 1GEN (mono or polycrystalline silicon cells and gallium arsenide) comprises well-known medium/low cost technologies that lead to moderate yields. The 2GEN (thin-film technologies) includes devices that have lower efficiency albeit are cheaper to manufacture. The 3GEN presents the use of novel materials, as well as a great variability of designs, and comprises expensive but very efficient cells. The 4GEN, also known as "inorganics-in-organics", combines the low cost/flexibility of polymer thin films with the stability of novel inorganic nanostructures (i.e., metal nanoparticles and metal oxides) with organic-based nanomaterials (i.e., carbon nanotubes, graphene and its derivatives), and are currently under investigation. The main goal of this review is to show the current state of art on photovoltaic cell technology in terms of the materials used for the manufacture, efficiency and production costs. A comprehensive comparative analysis of the four generations is performed, including the device architectures, their advantages and limitations. Special emphasis is placed on the 4GEN, where the diverse roles of the organic and nano-components are discussed. Finally, conclusions and future perspectives are summarized.
Collapse
Affiliation(s)
- José Antonio Luceño-Sánchez
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Alcalá University, 28871 Madrid, Spain.
| | - Ana María Díez-Pascual
- Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, Faculty of Sciences, Alcalá University, 28871 Madrid, Spain.
| | - Rafael Peña Capilla
- Department of Signal Theory and Communication, Polytechnic High School, Alcalá University, 28871 Madrid, Spain.
| |
Collapse
|
47
|
Scarfato P, Schiavone N, Rossi G, Incarnato L. An Easy Route to Wettability Changes of Polyethylene Terephthalate⁻Silicon Oxide Substrate Films for High Barrier Applications, Surface-Modified with a Self-Assembled Monolayer of Fluoroalkylsilanes. Polymers (Basel) 2019; 11:E257. [PMID: 30960241 PMCID: PMC6419057 DOI: 10.3390/polym11020257] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2018] [Revised: 01/25/2019] [Accepted: 01/29/2019] [Indexed: 11/16/2022] Open
Abstract
Inorganic⁻organic multilayer films consisting of polymers coated with thin inorganic oxidic layers (e.g., SiOx) ensure very high barrier performances against gas and vapor permeation, what makes them packaging materials suitable for sophisticated technical applications, including the encapsulation of photovoltaic devices or quantum dots, barrier films for optical displays, and transparent greenhouse screens. In these fields, surface coating or texturing of the multilayer protective films are effective technologies to improve their self-clean ability, thus reducing the required maintenance and ensuring longer durability and better performances. In this work, we used the self-assembled monolayer (SAM) technique to modify the surface and wetting properties of commercial polyethylene terephthalate-silicon oxide substrate (PET-SiOx) films developed for technical applications requiring a combined high barrier and transparency. The selected surface modifier was the 1H,1H,2H,2H-per-fluorodecyltrichlorosilane (FDTS). The reagent mixture composition was optimized for the lowest water and oil wettability, as well as the highest self-cleaning capacity and performance stability. In particular, for the used PET-SiOx film the best FDTS/film surface for both the lowest water and oil wettability was found to be equal to 26.5 mM/dm², which changes the surface behavior from very hydrophilic (static water contact angle (CAw) = 21.5°) to hydrophobic (CAw = 101°), and gives a significant increment of the static oil contact angle (CAo) from 27° to 60°. Interestingly, the results demonstrated that the SAM reaction occurred also on the uncoated the PET side. After the SAM treatment, a small increase of the water vapor permeability is observed, probably due to a crack or defect onset of the SiOx coating of the SAM modified films. On this point, atomic force measurements demonstrated an increment of the SiOx coating layer roughness after the SAM treatment execution. Finally, the transparency changes of the SAM treated films, measured in the wavelength range 400⁻800 nm, were always small, so that the results were acceptable for the films' use in applications where high transparency is required.
Collapse
Affiliation(s)
- Paola Scarfato
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano (SA), Italy.
| | - Nicola Schiavone
- Université Clermont Auvergne, CNRS, SIGMA Clermont, ICCF F-63000 Clermont⁻Ferrand, France.
| | - Gabriella Rossi
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano (SA), Italy.
| | - Loredana Incarnato
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano (SA), Italy.
| |
Collapse
|
48
|
Fakharan Z, Naji L, Madanipour K. Surface roughness regulation of reduced-graphene oxide/iodine - Based electrodes and their application in polymer solar cells. J Colloid Interface Sci 2019; 540:272-284. [PMID: 30660080 DOI: 10.1016/j.jcis.2019.01.029] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2018] [Revised: 12/20/2018] [Accepted: 01/08/2019] [Indexed: 11/30/2022]
Abstract
The current work presents an iodine-mediated fine-tuning method for the electrical and electrochemical properties of reduced-graphene oxide (r-GO)/iodine - based electrodes for application in ITO-free polymer solar cells (PSCs). A multi-technique investigation was applied to correlate the morphological features of GO thin films (GO TFs) with iodine adsorption during the reduction process by HI vapor, electrochemical band gap, Fermi potential, charge carrier mobility and charge density of iodine/r-GO based electrodes. The electrical and electrochemical characteristics of iodine/r-GO electrodes changed considerably by alteration of their surface roughness and iodine content. Iodine/r-GO TFs with the lowest surface roughness and the highest iodine content exhibited the highest charge carrier density and Fermi potential. Electrochemical impedance spectroscopy (EIS) and quantum Hall effect (QHE) results confirmed the p-type conductivity of r-GOs/iodine-based electrodes. PSCs were fabricated using r-GO/iodine electrodes as the photo-anode to follow the influences of iodine content and surface roughness on the photovoltaic performance of the cells. PSCs prepared based on r-GO/iodine electrodes possessing the lowest surface roughness and the highest iodine content provided the lowest charge transfer resistance (Rct) and remarkably higher (∼48%) PCE.
Collapse
Affiliation(s)
- Zahra Fakharan
- Department of Chemistry, AmirKabir University of Technology, 424 Hafez Avenue, Tehran P.O Box 15875-4413, Iran
| | - Leila Naji
- Department of Chemistry, AmirKabir University of Technology, 424 Hafez Avenue, Tehran P.O Box 15875-4413, Iran.
| | - Khosro Madanipour
- Optics, Laser and Photonics Research Institute, Amirkabir University of Technology, 424 Hafez Avenue, Tehran P.O Box 15875-4413, Iran
| |
Collapse
|
49
|
Investigations of Novel High-Temperature Resistant Polymers for Electro-Optical Applications in Signal Processing Systems. Symmetry (Basel) 2019. [DOI: 10.3390/sym11010060] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023] Open
Abstract
In this paper the novel high-temperature resistant polymers with nonlinear optical properties have been synthesized, characterized and tested for use in electro-optical components with high bit rate optical signal processing systems and for dynamic holography. The characterization that has been reported include the measurement of second-order nonlinear susceptibility by second harmonic generation, UV-VIS spectroscopy, XRD measurement dielectric relaxation, glass transition temperature and molecular weight distribution before and after artificial ageing. Also, we have done AFM investigations and profilometry measurements for stamp patterning layers. The application of the new polyimides for electro-optic devices has been evaluated by creation of thin oriented polymer films on various substrates and preparation of planar and strip waveguides.
Collapse
|
50
|
Shobukhov A, Koibuchi H. Parallel Tempering Monte Carlo Studies of Phase Transition of Free Boundary Planar Surfaces. Polymers (Basel) 2018; 10:E1360. [PMID: 30961285 PMCID: PMC6401898 DOI: 10.3390/polym10121360] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2018] [Revised: 12/02/2018] [Accepted: 12/05/2018] [Indexed: 11/26/2022] Open
Abstract
We numerically study surface models defined on hexagonal disks with a free boundary. 2D surface models for planar surfaces have recently attracted interest due to the engineering applications of functional materials such as graphene and its composite with polymers. These 2D composite meta-materials are strongly influenced by external stimuli such as thermal fluctuations if they are sufficiently thin. For this reason, it is very interesting to study the shape stability/instability of thin 2D materials against thermal fluctuations. In this paper, we study three types of surface models including Landau-Ginzburg (LG) and Helfirch-Polyakov models defined on triangulated hexagonal disks using the parallel tempering Monte Carlo simulation technique. We find that the planar surfaces undergo a first-order transition between the smooth and crumpled phases in the LG model and continuous transitions in the other two models. The first-order transition is relatively weak compared to the transition on spherical surfaces already reported. The continuous nature of the transition is consistent with the reported results, although the transitions are stronger than that of the reported ones.
Collapse
Affiliation(s)
- Andrey Shobukhov
- Faculty of Computational Mathematics and Cybernetics, Lomonosov Moscow State University, Leninskiye Gory, MSU, 2-nd Educational Building, Moscow 119991, Russia.
| | - Hiroshi Koibuchi
- Department of Industrial Engineering, National Institute of Technology, Ibaraki College, Nakane 866, Hitachinaka, Ibaraki 312-8508, Japan.
| |
Collapse
|