Extraction of Keratin from Rabbit Hair by a Deep Eutectic Solvent and Its Characterization

Mechanical Behaviour of Green Epoxy Composites Reinforced with Sheep and Dog Wool from Serra Da Estrela

Environmental awareness has led industries and consumers to replace products derived from oil resources with products derived from natural sources. In the case of the composite materials industry, the replacement of synthetic fibres with natural fibres has increased in recent years. To study the influence that different types of natural fibres and different textile manufacturing techniques have on the mechanical properties of composites, bio-based epoxy matrix composites reinforced with different natural animal fibres were produced, some reinforced with sheep's wool and others with dog wool, which were later subjected to bending and tensile tests. From the authors' knowledge, there are few studies of composites produced with animal fibres, and even fewer with dog hair. The textile structures used as reinforcement were created using crochet, knitting, and weaving techniques. Prior to the composites production, the fibres were characterized by X-ray Diffraction (X-RD), and the yarns produced from these fibres were subjected to tensile tests. The results obtained suggest that the number of yarns and the diameter of the needles used during the production of the reinforcement have a significant impact on the mechanical properties of the composites. The green epoxy resin composites reinforced with sheep's wool exhibit higher values of flexural strength, tensile strength, and Young's modulus than those reinforced with dog wool, with average increases of 36.97%, 45.16%, and 72.99%, respectively. It was also possible to verify that the composites reinforced with woven fabrics and crocheted fabrics exhibit the highest values of tensile strength, flexural strength, and Young's modulus. Additionally, the composites reinforced with woven fabrics exhibit the highest values of deformation at first failure/break and toughness.

Keratinous and corneous-based products towards circular bioeconomy: A research review

Keratins and corneous proteins are key components of biomaterials used in a wide range of applications and are potential substitutes for petrochemical-based products. Horns, hooves, feathers, claws, and similar animal tissues are abundant sources of α-keratin and corneous β-proteins, which are by-products of the food industry. Their close association with the meat industry raises environmental and ethical concerns regarding their disposal. To promote an eco-friendly and circular use of these materials in novel applications, efforts have focused on recovering these residues to develop sustainable, non-animal-related, affordable, and scalable procedures. Here, we review and examine biotechnological methods for extracting and expressing α-keratins and corneous β-proteins in microorganisms. This review highlights consolidated research trends in biomaterials, medical devices, food supplements, and packaging, demonstrating the keratin industry's potential to create innovative value-added products. Additionally, it analyzes the state of the art of related intellectual property and market size to underscore the potential within a circular bioeconomic model.

Keratin hydrolysate as a chrome exhaust aid and keratin filler in leather processing: A cleaner technology approach for tannery solid waste management and leather manufacturing

Hair burning unhairing and dampening of tannery wastes during the hair-saving unhairing process are becoming significant problems in the tanning industry. Therefore, this research article focuses on the extraction of keratin hydrolysate (KH) and its application as a chrome exhaust aid and keratin filler in leather manufacturing process. The structure, morphology and functional groups of the extract were examined using X-Ray Diffractometer (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FTIR), respectively. To study and contrast the degree of improvement in chromium uptake, the KH solution was applied both before tanning on the pickled pelt and after tanning during basification. The thermal stability, physical strength characteristics and organoleptic properties of the leathers obtained were characterized. Furthermore, the environmental impact of the tanning system was assessed through a comparative analysis of the spent liquors. Finally, experimental retanning process was conducted to replace the commercial protein filler (Celatan F: 50, 75, and 100 %) with KH solution, with concurrent processing of control leather using conventional chrome tanning agent at 6 % dosage of chromium. The FTIR analysis of the extract confirmed the presence of alkyl side chains of amino acids as well as carboxylic, amide, carboxyl group and aldehyde functional groups at 1400-1700 cm-1,3,303.46 cm-1,3270 cm-1 and 2752 cm-1, respectively. XRD spectrum showed two diffraction peaks at 2 theta values of 9.36° and 21.16°, respectively. Leathers with improved mechanical strength, organoleptic properties and thermal stability were obtained with 100 % substitution of Celatan F at pH 6 and 10 % chromium dosage. It was also discovered that the shrinkage temperature of the experimental leather was enhanced to more than 105 °C. Environmental impact evaluation on the spent liquor showed that the complete replacement of Celatan F with KH solution brought about a notable decrease in COD and TDS in the spent liquor. The extraction and application of tannery hair waste-based keratin hydrolysate as an efficient, environmentally friendly chrome exhaust aid and keratin filler has been attempted and established in this research article.

Viability Study of Serra da Estrela Dog Wool to Produce Green Composites

The environmental emergency has alerted consumers and industries to choose products derived from renewable sources over petroleum derivatives. Natural fibers of plant origin for reinforcing composite materials dominate the field of research aiming to replace synthetic fibers. The field of application of green dog wool composite materials needs to be reinforced and proven, as the industry is looking for more sustainable solutions and on the other hand this type of raw material (pet grooming waste) tends to grow. Hence, in the present work, the feasibility of applying natural fibers of dog origin (mainly composed by keratin) in green composites was studied. The green composites were developed using chemically treated dog wool of the breed Serra da Estrela (with NaOH and PVA) as reinforcement and a green epoxy resin as a matrix. The chemical treatments aimed to improve adhesion between fibers and matrix. The fibers' composition was determined using X-ray Diffraction (X-RD). Their morphology was determined using a scanning electron microscope (SEM). The wettability of the fiber was also evaluated qualitatively by analyzing drops of resin placed on the fibers treated with the different treatments. The mechanical properties of the composites were also studied through mechanical tensile, flexural, and relaxation tests. Overall, the best results were obtained for the dog wool fibers without treatment. The tensile and flexural strength of this biocomposite were 11 MPa and 26.8 MPa, respectively, while the tensile and flexural elastic modulus were 555 MPa and 1100 MPa, respectively. It was also possible to verify that the PVA treatment caused degradation of the fiber, resulting in a decrease in mechanical tensile strength of approximately 42.7%, 59.7% in flexural strength and approximately 59% of the stress after 120 min of relaxation when compared to fiber made from untreated dog wool. On the other hand, the NaOH treatment worked as a fiber wash process, removing waxes and fats naturally present on the fiber surface.

Evaluating the status quo of deep eutectic solvent in food chemistry. Potentials and limitations

Conventional organic solvents (e.g., methanol, ethanol, ethyl acetate) are widely used for extraction, reaction, and separation of valuable compounds. Although these solvents are effective, they have disadvantages, including flammability, toxicity, and persistence in the environment. Deep eutectic solvents (DESs) are valued for their biodegradability/low impact on the environment, low cost, and ease of manufacture. The objective of this review was to provide an overview of applications of DES in food chemistry, specifically in regard of extraction of polyphenols (e.g., anthocyanin, rutin, kaempferol, quercetin, resveratrol), protein, carbohydrates (e.g., chitin, pectins), lipids and lipid-soluble compounds (e.g., free fatty acids, astaxanthin, β-carotene, terpenoids), biosensor development, and use in food safety (pyrethroids, Sudan I, bisphenol A, Pb²⁺, Cd²⁺, etc.) over the past five years. A comprehensive analysis and discussion of DES types, preparation, structures, and influencing factors is provided. Furthermore, the potential and disadvantages of using DESs to extract biomolecules were assessed. We concluded that DES is a viable alternative for extracting polyphenols, carbohydrates, and lipids as well as use in food safety monitoring and biosensor development. However, more work is needed to address shortcomings, and determine whether using compounds extracted with DES can be consumed safely.

Optimization of Keratin Hydrolysate Extraction from Tannery Sheep Hair Waste

Tannery hair wastes are becoming a challenge for tanners regarding environmental pollution control and human health. In this study, an experiment had been designed to hydrolyse sheep hair in an alkaline medium, and the operational condition for the alkaline extraction of KH has been modeled and optimized. The structure, morphology, functional groups, particle size, and molecular mass of the KH extracts were evaluated experimentally by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), particle size analysis, and SDS-PAGE analysis, respectively. FTIR analysis of the extract confirmed the presence of carboxylic, amide, and aldehyde functional groups and alkyl side chains of amino acids. The molecular weight of the extracted keratin ranges between 3–15 kDa, and X-ray diffraction (XRD) analysis showed an amorphous form of structure with two peaks at 2 theta of 9.36° and 21.16° due to $\alpha$ -helix and $\beta$ - sheet structure in keratin. Response surface methodology (RSM) coupled with BOX-Behnken design was applied as a statistical tool to investigate the effect of extraction time, the concentration of the hydrolysing agent, and temperature on the response variable (yield of keratin protein). The concentration of the hydrolysing agent was found to be the most significant factor affecting the speed of extraction, but its gradual increase tends to affect the protein content of the extract. Optimum parameters of 0.5 N, 80°C, and 3.5 hr were obtained for the concentration of NaOH, temperature, and extraction time, respectively, with a maximum average protein yield of 91.5% and a percentage total nitrogen content of 14.6% using the Kjeldahl method and 86.57% using the biuret test method.

Preparation Methods and Functional Characteristics of Regenerated Keratin-Based Biofilms

The recycling, development, and application of keratin-containing waste (e.g., hair, wool, feather, and so on) provide an important means to address related environmental pollution and energy shortage issues. The extraction of keratin and the development of keratin-based functional materials are key to solving keratin-containing waste pollution. Keratin-based biofilms are gaining substantial interest due to their excellent characteristics, such as good biocompatibility, high biodegradability, appropriate adsorption, and rich renewable sources, among others. At present, keratin-based biofilms are a good option for various applications, and the development of keratin-based biofilms from keratin-containing waste is considered crucial for sustainable development. In this paper, in order to achieve clean production while maintaining the functional characteristics of natural keratin as much as possible, four important keratin extraction methods—thermal hydrolysis, ultrasonic technology, eco-friendly solvent system, and microbial decomposition—are described, and the characteristics of these four extraction methods are analysed. Next, methods for the preparation of keratin-based biofilms are introduced, including solvent casting, electrospinning, template self-assembly, freeze-drying, and soft lithography methods. Then, the functional properties and application prospects of keratin-based biofilms are discussed. Finally, future research directions related to keratin-based biofilms are proposed. Overall, it can be concluded that the high-value conversion of keratin-containing waste into regenerated keratin-based biofilms has great importance for sustainable development and is highly suggested due to their great potential for use in biomedical materials, optoelectronic devices, and metal ion detection applications. It is hoped that this paper can provide some basic information for the development and application of keratin-based biofilms.

Novel Deep Eutectic Solvent-Based Protein Extraction Method for Pottery Residues and Archeological Implications

Proteomic analysis of absorbed residues is increasingly used to identify the foodstuffs processed in ancient ceramic vessels, but detailed methodological investigations in this field remain rare. Here, we present three interlinked methodological developments with important consequences in paleoproteomics: the comparative absorption and identification of various food proteins, the application of a deep eutectic solvent (DES) for extracting ceramic-bound proteins, and the role of database choice in taxonomic identification. Our experiments with modern and ethnoarcheological ceramics show that DES is generally more effective at extracting ceramic-bound proteins than guanidine hydrochloride (GuHCl), and cereal proteins are absorbed and subsequently extracted and identifiedat least as readily as meat proteins. We also highlight some of the challenges in cross-species proteomics, whereby species that are less well-represented in databases can be attributed an incorrect species-level taxonomic assignment due to interspecies similarities in protein sequence. This is particularly problematic in potentially mixed samples such as cooking-generated organic residues deposited in pottery. Our work demonstrates possible proteomic separation of fishes and birds, the latter of which have so far eluded detection through lipidomic analyses of organic residue deposits in pottery, which has important implications for tracking the exploitation of avian species in various ancient communities around the globe.

Application of deep eutectic solvents in protein extraction and purification

Deep eutectic solvents (DESs) are a mixture of hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA) molecules that can consist, respectively, of natural plant metabolites such as sugars, carboxylic acids, amino acids, and ionic molecules, which are for the vast majority ammonium salts. Media such as DESs are modular tools of sustainability that can be pointed toward the extraction of bioactive molecules due to their excellent physicochemical properties, their relatively low price, and accessibility. The present review focuses on the application of DESs for protein extraction and purification. The in-depth effects and principles that apply to DES-mediated extraction using various renewable biomasses will be discussed as well. One of the most important observations being made is that DESs have a clear ability to maintain the biological and/or functional activity of the extracted proteins, as well as increase their stability compared to traditional solvents. They demonstrate true potential for a reproducible but more importantly, scalable protein extraction and purification compared to traditional methods while enabling waste valorization in some particular cases.

Valorisation of keratinous wastes: A sustainable approach towards a circular economy

The valorisation of keratinous wastes involves biorefining and recovering the bioresource materials from the keratinous wastes to produce value-added keratin-based bioproducts with a broad application, distribution, and marketability potential. Valorisation of keratinous wastes increases the value of the wastes and enables more sustainable waste management towards a circular bioeconomy. The abundance of keratinous wastes as feedstock from agro-industrial processing, wool processing, and grooming industry benefits biorefinery and extraction of keratins, which could be the optimal solution for developing an ecologically and economically sustainable keratin-based economy. The transition from the current traditional linear models that are deleterious to the environment, which end energy and resources recovery through disposal by incineration and landfilling, to a more sustainable and closed-loop recycling and recovery approach that minimises pollution, disposal challenges, loss of valuable bioresources and potential revenues are required. The paper provides an overview of keratinous wastes and the compositional keratin proteins with the descriptions of the various keratin extraction methods in biorefinery and functional material synthesis, including enzymatic and microbial hydrolysis, chemical hydrolysis (acid/alkaline hydrolysis, dissolution in ionic liquids, oxidative and sulphitolysis) and chemical-free hydrolysis (steam explosion and ultrasonic). The study describes various uses and applications of keratinases and keratin-based composites fabricated through various manufacturing processes such as lyophilisation, compression moulding, solvent casting, hydrogel fabrication, sponge formation, electrospinning, and 3D printing for value-added applications.

Current understanding and insights towards protein stabilization and activation in deep eutectic solvents as sustainable solvent media

Deep eutectic solvents (DESs) have emerged as a new class of green, designer and biocompatible solvents, an alternative to conventional organic solvents and ionic liquids (ILs) which are comparatively toxic and non-biodegradable. DESs are eutectic mixtures that are formed when a hydrogen bond acceptor (HBA) is mixed with a hydrogen bond donor (HBD) at particular molar ratios by mechanical grinding or under mild heating conditions. Very recently, these solvents have been the center of attention for researchers in biotechnology, biomedicine and various scientific applications. These environmentally benign solvents have a close analogy with ILs; however, they offer certain unique merits over traditional ILs. DESs display remarkable properties such as easy preparation, tunable composition, biodegradability, recyclability, inherently low toxicity, sustainability and biocompatibility; these special features validate DESs as new potential solvents/co-solvents for biomolecules. Mechanistically, the biocompatibility and protein friendly nature of DESs depend on various factors, which include the composition of the DES, viscosity and hydration level. Therefore, it becomes an essential task to bring together all the studies related to protein behaviour in DESs to unlock their biomolecular proficiency. This review specifically highlights recent insights into the biomacromolecular functionality in DESs, including outlines of the solubilization and stabilization of proteins, long term protein packaging, different extraction methods and enzyme activation in the presence of DESs. A literature survey reveals that DESs act as green media in which the protein structure and activity are retained. In some cases, proteins refolded and enzymatic activity was enhanced several fold in the presence of DESs. Furthermore, we have reviewed the possible mechanistic behaviour behind protein stabilization, refolding and activation in DESs. Overall, the main objective of this review is to explicate the advantages of the introduction of DESs for biomolecules and to demonstrate the versatility of these eco-friendly solvents for future bio-based applications.

Protein by-products: Composition, extraction, and biomedical applications

Significant upsurge in animal by-products such as skin, bones, wool, hides, feathers, and fats has become a global challenge and, if not properly disposed of, can spread contamination and viral diseases. Animal by-products are rich in proteins, which can be used as nutritional, pharmacologically functional ingredients, and biomedical materials. Therefore, recycling these abundant and renewable by-products and extracting high value-added components from them is a sustainable approach to reclaim animal by-products while addressing scarce landfill resources. This article appraises the most recent studies conducted in the last five years on animal-derived proteins' separation and biomedical application. The effort encompasses an introduction about the composition, an overview of the extraction and purification methods, and the broad range of biomedical applications of these ensuing proteins.

Development and validation of a method for simultaneous analysis of hair underivatized amino acids and damage biomarkers, using liquid chromatography-tandem mass spectrometry

The forensic and medical fields are seeing growing interest in the amino acid and damage biomarker composition of hair, in order to identify adulteration of drug hair testing and for diagnostic purposes. Therefore, there is an increased demand for quick and accurate analytical methods. This study presents the first liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay for the simultaneous quantification of hair amino acids and four damage biomarkers, which also implements an isotopic dilution strategy to improve recovery and precision of the acid hydrolysis-sensitive analytes. The applied strategy enabled a recovery of the hydrolysis-sensitive amino acids between 83 and 120% (vs. 33-77%, without isotopic dilution) for two different protein standards, and a precision with a relative standard deviation (RSD) between 1.3 and 7.5% (vs. 9.0-29.4%, without isotopic dilution). All 21 analytes could be measured without interferences by matrix and sample components, thus demonstrating satisfactory selectivity of the method. For spiked samples of hair hydrolyzate, recovery was between 88 and 120%, whereas precision and intermediate precision were below 10.1%. The high sensitivity of the method made it possible to reduce sample preparation to a 10000-fold dilution of the raw hydrolyzate. The wide linear range displayed by the method allowed the simultaneous quantification of minor (0.3 μmol/g of hair) and major (up to 1000 μmol/g of hair) components of the biological fiber. This method was successfully applied to the analysis of real hair samples submitted to six different treatments. Statistical data analysis by means of t-test and principal component analysis (PCA) showed a clear discrimination of the treated from the untreated hair samples and of the different treatments. Since these hair treatments can interfere with hair drug testing, the method possesses the ability of identifying hair samples with potential for attempted drug test evasion. In addition, lanthionine emerged as a new biomarker for heat damaged hair.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Closing the Loop with Keratin-Rich Fibrous Materials

One of the agro-industry's side streams that is widely met is the-keratin rich fibrous material that is becoming a waste product without valorization. Its management as a waste is costly, as the incineration of this type of waste constitutes high environmental concern. Considering these facts, the keratin-rich waste can be considered as a treasure for the producers interested in the valorization of such slowly-biodegradable by-products. As keratin is a protein that needs harsh conditions for its degradation, and that in most of the cases its constitutive amino acids are destroyed, we review new extraction methods that are eco-friendly and cost-effective. The chemical and enzymatic extractions of keratin are compared and the optimization of the extraction conditions at the lab scale is considered. In this study, there are also considered the potential applications of the extracted keratin as well as the reuse of the by-products obtained during the extraction processes.

Study on the Structure and Properties of Biofunctional Keratin from Rabbit Hair

Keratin is widely recognized as a high-quality renewable protein resource for biomedical applications. A large amount of rabbit hair waste is produced in textile industries, because it has high medullary layer content, but poor spinnability. Therefore, it is of great significance to extract keratin from waste rabbit hair for recycling. In this research, an ultrasonic-assisted reducing agent-based extraction method was developed and applied to extract keratin from rabbit hair. The results showed that the ultrasonic treatment had a certain destructive effect on the structure of the fiber, and when combined with reducing agent, it could effectively promote the dissolution of rabbit hair, and extract keratin with high molecular weight between 31 and 94 kDa. The structure and properties of keratin were studied. Compared to the rabbit hair, the cystine content of keratin was significantly reduced, and the secondary structure changed from α-helix to β-sheet. The keratin products show excellent biocompatibility and antioxidant capacity. In addition, large keratin particles can be formed by assembly with a balance between intermolecular hydrophobic attraction as the concentration of urea in keratin solution decreased during dialysis.

Ion transfer channel network formed by flower and rod shape crystals of hair hydrolysate in poly(vinyl alcohol) matrix and its application as anion exchange membrane in fuel cells

Ion transfer phenomena occurring in nature are known to be most efficient. Many efforts have been made to mimic such phenomena, especially in the area of energy transfer. Proteins consisting of various amino acids are known to be the fundamental materials behind these phenomena. In the current study, an effort was made to extract proteinaceous material from human hair bio-waste by a green chemical-free thermal hydrolysis process. A simple heat treatment of the human hairs in presence of water led to the formation of a water soluble material, which was called hair hydrolysate (HH), contains 70 wt% proteinaceous material. It was utilized for the fabrication of poly(vinyl alcohol) (PVA) matrix-based anion exchange membrane (AEM). Presence of 27 wt% charged amino acids and 19 wt% polarizable amino acids in the HH provided effective charge transfer sites. 7 wt% arginine present in the HH, having continuous delocalized net positive charge helped the membrane to be stable in highly alkaline conditions, which was confirmed by an indirect analysis of alkaline stability. Formation of rod and flower shaped crystal morphology by the HH in glutaraldehyde crosslinked PVA matrix, created a continuous channel network at higher loadings, which provided a simple path for ion transfer, achieving OH^- conductivity of 7.46 mS/cm at 70 °C. Swelling of the PVA matrix was minimized by annealing of the HH loaded sample, which resulted in reduction of ionic conductivity to 6.16 mS/cm (at 70 °C). At the same time, improvement in the properties like increase in thermal, mechanical and thermo-mechanical stability, reduction in water uptake, %swelling and methanol permeability was observed. The selectivity of the membrane was increased to almost a decimal place. Thus, the HH obtained from simple green thermal hydrolysis of human hair bio-waste is a cheap material, which is found to be suitable as ion conductive material for alkaline fuel cells.

Functionalization of biopolymer fibers with magnetic nanoparticles

Hybrid fibers consisting of biopolymers and inorganic nanoparticles are receiving increasing attention due to their unique properties. Commonly, the nanoparticles are chosen for their intrinsic properties such as magnetic, thermal, or electrical conductivity. The biopolymer component of the hybrid fiber is chosen for its mechanical properties and ability to act as a scaffold or matrix for the nanoparticles. While there are many fiber-forming synthetic polymers, there has been a recent interest in replacing these systems with biopolymers due to their sustainability, biocompatibility, nontoxicity, and biodegradability. Fibers made from biopolymers have one additional benefit over synthetic polymers as they make good scaffolds for embedding nanoparticles without the need of any additional bonding agents. In particular, naturally occurring biopolymers such as proteins exhibit a myriad of interactions with nanoparticles, including ionic, H-bonding, covalent, Van der Waals, and electrostatic interactions. The diverse range of interactions between magnetic nanoparticles and biopolymers makes resulting hybrid fibers of particular interest as magnetic-responsive materials. Magnetically responsive hybrid biopolymer fibers have many features, including enhanced thermal stabilities, strong mechanical toughness, and perhaps most interestingly multifunctionality, allowing for a wide range of applications. These applications range from biosensing, filtration, UV shielding, antimicrobial, and medical applications, to name a few. Here, we review established hybrid fibers consisting of biopolymers and nanoparticles with a primary focus on biopolymers doped with magnetic nanoparticles and their various putative applications.

Keratin Associations with Synthetic, Biosynthetic and Natural Polymers: An Extensive Review

Among the biopolymers from animal sources, keratin is one the most abundant, with a major contribution from side stream products from cattle, ovine and poultry industry, offering many opportunities to produce cost-effective and sustainable advanced materials. Although many reviews have discussed the application of keratin in polymer-based biomaterials, little attention has been paid to its potential in association with other polymer matrices. Thus, herein, we present an extensive literature review summarizing keratin's compatibility with other synthetic, biosynthetic and natural polymers, and its effect on the materials' final properties in a myriad of applications. First, we revise the historical context of keratin use, describe its structure, chemical toolset and methods of extraction, overview and differentiate keratins obtained from different sources, highlight the main areas where keratin associations have been applied, and describe the possibilities offered by its chemical toolset. Finally, we contextualize keratin's potential for addressing current issues in materials sciences, focusing on the effect of keratin when associated to other polymers' matrices from biomedical to engineering applications, and beyond.

Polymer Science and Engineering Using Deep Eutectic Solvents

The green and versatile character of deep eutectic solvents (DES) has turned them into significant tools in the development of green and sustainable technologies. For this purpose, their use in polymeric applications has been growing and expanding to new areas of development. The present review aims to summarize the progress in the field of DES applied to polymer science and engineering. It comprises fundamentals studies involving DES and polymers, recent applications of DES in polymer synthesis, extraction and modification, and the early developments on the formulation of DES–polymer products. The combination of DES and polymers is highly promising in the development of new and ‘greener’ materials. Still, there is plenty of room for future research in this field.

Green process to regenerate keratin from feathers with an aqueous deep eutectic solvent

In the present study, waste feathers were processed into uniform keratin feedstock using an aqueous, inexpensive and non-toxic deep eutectic solvent.