Searching Nanoplastics: From Sampling to Sample Processing

Nanoplastics as Gene and Epigenetic Modulators of Endocrine Functions: A Perspective

Nanoplastics (NPs) represent a major challenge in environmental contamination resulting from the physical, chemical, and biological degradation of plastics. Their characterization requires advanced and expensive methods, which limit routine analyses. The biological effects of NPs depend on their chemical and physical properties, which influence toxicity and interactions with biological systems. Studies in animal models, such as Daphnia magna and Danio rerio, show that NPs induce oxidative stress, inflammation, DNA damage, and metabolic alterations, often related to charge and particle size. NPs affect endocrine functions by acting as endocrine disruptors, interfering with thyroid and sex hormones and showing potential transgenerational effects through epigenetic modifications, including DNA hyper- and hypomethylation. Behavioral and neurofunctional alterations have been observed in Danio rerio and mouse models, suggesting a link between NP exposure and neurotransmitters such as dopamine and serotonin. Despite limited human studies, the presence of NPs in breast milk and placenta underscores the need for further investigation of health effects. Research focusing on genetic and epigenetic markers is encouraged to elucidate the molecular mechanisms and potential risks associated with chronic exposure.

Electrophoresis and Quartz Crystal Microbalance Instrumentation to Sense Nanoplastics in Water

We report a Technical Note on detecting nanoplastics in water samples through electrophoresis and quartz crystal microbalance (QCM) instrumentation. We conducted electrophoresis experiments by immersing a QCM in a sample of ultrapure water containing polyethylene (PE) nanoplastics. It was interesting to observe that nanoplastics were attracted toward the QCM and adhered to one side of the QCM electrode. The attached particles introduced mass loading to the QCM and were characterized by a decrease in resonance frequency of the crystal. Furthermore, when a small region around the center of electrode was alone exposed for direct contact in water and the rest of the electrode was masked using photoresist, the nanoplastics were concentrated only in the exposed electrode region, significantly enhancing detection sensitivity. To further investigate the applicability for real-life water samples, we experimented with the technique with readily available bottled drinking water and mineral water, where we spiked these water samples with nanoplastics. It was observed that the resonance frequency shifts were significantly larger for samples with nanoplastics compared to samples without nanoplastics. In addition, Raman spectroscopy and microscopy imaging were used to further confirm the presence and locations of nanoplastics on the electrode surface. This study highlights the combination of electrophoresis and QCM effectiveness in detecting nanoplastics across different water types and their potential for broader applications in environmental monitoring.

Plastic Fly: What Drosophila melanogaster Can Tell Us about the Biological Effects and the Carcinogenic Potential of Nanopolystyrene

Today, plastic pollution is one of the biggest threats to the environment and public health. In the tissues of exposed species, micro- and nano-fragments accumulate, leading to genotoxicity, altered metabolism, and decreased lifespan. A model to investigate the genotoxic and tumor-promoting potential of nanoplastics (NPs) is Drosophila melanogaster. Here we tested polystyrene, which is commonly used in food packaging, is not well recycled, and makes up at least 30% of landfills. In order to investigate the biological effects and carcinogenic potential of 100 µm polystyrene nanoparticles (PSNPs), we raised Oregon [R] wild-type flies on contaminated food. After prolonged exposure, fluorescent PSNPs accumulated in the gut and fat bodies. Furthermore, PSNP-fed flies showed considerable alterations in weight, developmental time, and lifespan, as well as a compromised ability to recover from starvation. Additionally, we noticed a decrease in motor activity in DNAlig4 mutants fed with PSNPs, which are known to be susceptible to dietary stressors. A qPCR molecular investigation of the larval intestines revealed a markedly elevated expression of the genes drice and p53, suggesting a response to cell damage. Lastly, we used warts-defective mutants to assess the carcinogenic potential of PSNPs and discovered that exposed flies had more aberrant masses than untreated ones. In summary, our findings support the notion that ingested nanopolystyrene triggers metabolic and genetic modifications in the exposed organisms, eventually delaying development and accelerating death and disease.

A modified methodology for extraction and quantification of microplastics in soil

The ubiquitousness of microplastics (<5 mm) has become a pressing environmental concern globally due to the extensive use of plastics. Microplastics have been well-studied in aquatic environments but not well-characterized in soils. Present analytical processes to quantify microplastics accurately in soil samples are quite challenging and require improved and validated analytical steps to eliminate the obscurities and biases. We aimed to develop an effective method for the extraction and quantification of microplastics from soil samples. Different ratios of low-(NaCl) and high-density solutions (ZnCl2/ NaBr) were tested to determine the most efficient combination for density-dependent separation of microplastics from soil. The combination of low- (1:6) and high-density (1:3) solutions {as weight of soil(g)/volume of density solution(ml)} accounted for 95% recovery of the spiked microplastic particles from soil samples. Likewise, different soil-to-solution ratios of H2O2 were tested for the removal of soil organic matter with heating and non-heating steps. Prior removal of organic matter from soil samples achieved a clear supernatant that facilitated 99% recovery of microplastic particles. The validation of individually spiked microplastic particles of small (10-100 μm) and large scale (100-5000 μm) resulted in recovery ranging from 88 to 99%. A validated modified method with prior digestion followed by density-dependent separation was further tested using the field samples with microplastic contamination. The microplastics of different shapes, sizes, colours and polymeric compositions were reported efficiently and well characterized in the field-collected soil samples using this method.

Material-specific binding peptides empower sustainable innovations in plant health, biocatalysis, medicine and microplastic quantification

Material-binding peptides (MBPs) have emerged as a diverse and innovation-enabling class of peptides in applications such as plant-/human health, immobilization of catalysts, bioactive coatings, accelerated polymer degradation and analytics for micro-/nanoplastics quantification. Progress has been fuelled by recent advancements in protein engineering methodologies and advances in computational and analytical methodologies, which allow the design of, for instance, material-specific MBPs with fine-tuned binding strength for numerous demands in material science applications. A genetic or chemical conjugation of second (biological, chemical or physical property-changing) functionality to MBPs empowers the design of advanced (hybrid) materials, bioactive coatings and analytical tools. In this review, we provide a comprehensive overview comprising naturally occurring MBPs and their function in nature, binding properties of short man-made MBPs (<20 amino acids) mainly obtained from phage-display libraries, and medium-sized binding peptides (20-100 amino acids) that have been reported to bind to metals, polymers or other industrially produced materials. The goal of this review is to provide an in-depth understanding of molecular interactions between materials and material-specific binding peptides, and thereby empower the use of MBPs in material science applications. Protein engineering methodologies and selected examples to tailor MBPs toward applications in agriculture with a focus on plant health, biocatalysis, medicine and environmental monitoring serve as examples of the transformative power of MBPs for various industrial applications. An emphasis will be given to MBPs' role in detecting and quantifying microplastics in high throughput, distinguishing microplastics from other environmental particles, and thereby assisting to close an analytical gap in food safety and monitoring of environmental plastic pollution. In essence, this review aims to provide an overview among researchers from diverse disciplines in respect to material-(specific) binding of MBPs, protein engineering methodologies to tailor their properties to application demands, re-engineering for material science applications using MBPs, and thereby inspire researchers to employ MBPs in their research.

Microplastic in an apex predator: evidence from Barn owl (Tyto alba) pellets in two sites with different levels of anthropization

Plastic pollution in terrestrial and freshwater environments and its accumulation along food chains has been poorly studied in birds. The Barn owl (Tyto alba) is an opportunistic and nocturnal apex predator feeding mostly on small mammals. In this note, we reported evidence of microplastics (MPs) contamination in Barn owl pellets collected, for the first time, in two sites with different levels of anthropization (low: natural landscape mosaic vs. high extensive croplands). The following polymers have been recorded: polyvinylchloride (PVC), polyethylene (PE), expanded polyester (EPS), polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyester (PL), viscose, and starch-based biopolymer. We found significant higher MPs frequency in the most anthropized site. Our results suggest that pellet' analysis may represent a cost-effective method for monitoring MP contamination along food chains in terrestrial ecosystems.

Assessing Microplastics and Nanoparticles in the Surface Seawater of Venice Lagoon-Part I: Methodology of Research

Microplastics (MPs) and nanoplastics (NPs) both represent significant concerns in environmental sciences. This paper aims to develop a convenient and efficient methodology for the detection and measurement of MPs and nanoparticles from surface seawater and to apply it to the water samples collected from the UNESCO site of Venice and its lagoon, more precisely in the Venice-Lido Port Inlet, Grand Canal under Rialto Bridge, and Saint Marc basin. In this study, MPs were analyzed through optical microscopy for their relative abundance and characterized based on their color, shape, and size classes, while the concentration and the mean of nanoparticles were estimated via the Nanoparticle Tracking Analysis technique. Bulk seawater sampling, combined with filtration through a cascade of stainless-steel sieves and subsequent digestion, facilitates the detection of MPs of relatively small sizes (size classes distribution: >1 mm, 1000-250 μm, 250-125 μm, 125-90 μm, and 90-32 μm), similar to the size of MPs ingested by marine invertebrates and fishes. A protocol for minimizing interference from non-plastic nanoparticles through evaporation, digestion, and filtration processes was proposed to enrich the sample for NPs. The findings contribute to the understanding of the extent and characteristics of MPs and nanoparticle pollution in the Venice Lagoon seawater, highlighting the potential environmental risks associated with these pollutants and the need for coordinated approaches to mitigate them. This article is based on scientific research carried out within the framework of the H2020 In-No-Plastic-Innovative approaches towards prevention, removal and reuse of marine plastic litter project (G.A. ID no. 101000612).

Sublethal effects induced by different plastic nano-sized particles in Daphnia magna at environmentally relevant concentrations

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards.

When microplastics meet electroanalysis: future analytical trends for an emerging threat

Microplastics are a major modern challenge that must be addressed to protect the environment, particularly the marine environment. Microplastics, defined as particles ≤5 mm, are ubiquitous in the environment. Their small size for a relatively large surface area, high persistence and easy distribution in water, soil and air require the development of new analytical methods to monitor their presence. At present, the availability of analytical techniques that are easy to use, automated, inexpensive and based on new approaches to improve detection remains an open challenge. This review aims to outline the evolution and novelties of classical and advanced methods, in particular the recently reported electroanalytical detectors, methods and devices. Among all the studies reviewed here, we highlight the great advantages of electroanalytical tools over spectroscopic and thermal analysis, especially for the rapid and accurate detection of microplastics in the sub-micron range. Finally, the challenges faced in the development of automated analytical methods are discussed, highlighting recent trends in artificial intelligence (AI) in microplastics analysis.

A review on constructive classification framework of research trends in analytical instrumentation for secondary micro(nano)plastics: What is new and what needs next?

Secondary micro(nano)plastics generated from the degradation of plastics pose a major threat to environmental and human health. Amid the growing research on microplastics to date, the detection of secondary micro(nano)plastics is hampered by inadequate analytical instrumentation in terms of accuracy, validation, and repeatability. Given that, the current review provides a critical evaluation of the research trends in instrumental methods developed so far for the qualitative and quantitative determination of micro(nano)plastics with an emphasis on the evolution, new trends, missing links, and future directions. We conducted a meta-analysis of the growing literature surveying over 800 journal articles published from 2004 to 2022 based on the Web of Science database. The significance of this review is associated with the proposed novel classification framework to identify three main research trends, viz. (i) preliminary investigations, (ii) current progression, and (iii) novel advances in sampling, characterization, and quantification targeting both micro- and nano-sized plastics. Field Flow Fractionation (FFF) and Hydrodynamic Chromatography (HDC) were found to be the latest techniques for sampling and extraction of microplastics. Fluorescent Molecular Rotor (FMR) and Thermal Desorption-Proton Transfer Reaction-Mass Spectrometry (TD-PTR-MS) were recognized as the modern developments in the identification and quantification of polymer units in micro(nano)plastics. Powerful imaging techniques, viz. Digital Holographic Imaging (DHI) and Fluorescence Lifetime Imaging Microscopy (FLIM) offered nanoscale analysis of the surface topography of nanoplastics. Machine learning provided fast and less labor-intensive analytical protocols for accurate classification of plastic types in environmental samples. Although the existing analytical methods are justifiable merely for microplastics, they are not fully standardized for nanoplastics. Future research needs to be more inclined towards secondary nanoplastics for their effective and selective analysis targeting a broad range of environmental and biological matrices.

A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices

Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.

Simulation and Characterization of Nanoplastic Dissolution under Different Food Consumption Scenarios

Understanding of the potential leaching of plastic particles, particularly nanoplastics (NPs), from food packaging is crucial in assessing the safety of the packaging materials. Therefore, the objective of this study was to investigate potential exposure risks by simulating the release of NPs from various plastic packaging materials, including polypropylene (PP), general casting polypropylene (GCPP) or metalized casting polypropylene (MCPP), polyethylene (PE), polyethylene terephthalate (PET), and polyphenylene sulfone (PPSU), under corresponding food consumption scenarios. Surface-enhanced Raman scattering (SERS) and scanning electron microscopy (SEM) were utilized to identify and characterize the NPs leached from plastic packaging. The presence of separated NPs was observed in PP groups subjected to 100 °C hot water, GCPP plastic sterilized at a high temperature (121 °C), and PE plastic soaked in 100 °C hot water, exhibited a distorted morphology and susceptibility to aggregation. The findings suggest that the frequent consumption of takeaway food, hot beverages served in disposable paper cups, and foods packaged with GCPP materials may elevate the risk of ingestion of NPs. This reminds us that food packaging can serve as an important avenue for human exposure to NPs, and the results can offer valuable insights for food safety management and the development of food packaging materials.

Nanoplastics exposure disrupts circadian rhythm associated with dysfunction of the endolysosomal pathway and autophagy in Caenorhabditis elegans

Nanoplastics (NPs), an emerging pollutant, have raised great safety concerns due to their widespread applications and continuous release into the environment, which lead to potential human and environmental risks. Recently, polystyrene NPs (100 nm; 100 mg/L) exposure has been reported to disrupt circadian rhythms under five days temperature entrainment and be associated with stress resistance decline in Caenorhabditis elegans. This study explored the possible relationship between circadian rhythm disruption and endocytosis and autophagy under polystyrene NPs exposure in C. elegans. We show that the disrupted circadian rhythm induced by NPs exposure reduced stress resistance via endocytosis and autophagy impairment. Furthermore, we found that most NPs taken up by intestinal cells were localized to early endosomes, late endosomes, and lysosomes and delivered to autophagosomes. In addition, the disruption of circadian rhythm inhibited NPs localization to these organelles. These findings indicate that NPs exposure disrupts circadian rhythm and alters its subcellular trafficking, leading to enhanced toxicity in C. elegans. Our results shed light on the prominent role of NPs exposure in circadian rhythm disruption associated with endocytosis and autophagy impairments, which may be conserved in higher animals such as humans.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

Effects of petroleum-based and biopolymer-based nanoplastics on aquatic organisms: A case study with mechanically degraded pristine polymers

Mismanaged plastic litter submitted to environmental conditions may breakdown into smaller fragments, eventually reaching nano-scale particles (nanoplastics, NPLs). In this study, pristine beads of four different types of polymers, three oil-based (polypropylene, PP; polystyrene, PS; and low-density polyethylene, LDPE) and one bio-based (polylactic acid, PLA) were mechanically broken down to obtain more environmentally realistic NPLs and its toxicity to two freshwater secondary consumers was assessed. Thus, effects on the cnidarian Hydra viridissima (mortality, morphology, regeneration ability, and feeding behavior) and the fish Danio rerio (mortality, morphological alterations, and swimming behavior) were tested at NPLs concentrations in the 0.001 to 100 mg/L range. Mortality and several morphological alterations were observed on hydras exposed to 10 and 100 mg/L PP and 100 mg/L LDPE, whilst regeneration capacity was overall accelerated. The locomotory activity of D. rerio larvae was affected by NPLs (decreased swimming time, distance or turning frequency) at environmentally realistic concentrations (as low as 0.001 mg/L). Overall, petroleum- and bio-based NPLs elicited pernicious effects on tested model organisms, especially PP, LDPE and PLA. Data allowed the estimation of NPLs effective concentrations and showed that biopolymers may also induce relevant toxic effects.

Cocktail effects of emerging contaminants on zebrafish: Nanoplastics and the pharmaceutical diphenhydramine

Nanoplastics (NPLs) became ubiquitous in the environment, from the air we breathe to the food we eat. One of the main concerns about the NPLs risks is their role as carrier of other environmental contaminants, potentially increasing their uptake, bioaccumulation and toxicity to the organisms. Therefore, the main aim of this study was to understand how the presence of polystyrene NPLs (∅ 44 nm) will influence the toxicity (synergism, additivity or antagonism) of the antihistamine diphenhydramine (DPH), towards zebrafish (Danio rerio) embryos, when in dual mixtures. After 96 hours (h) exposure, at the organismal level, NPLs (0.015 or 1.5 mg/L) + DPH (10 mg/L) induced embryo mortality (90%) and malformations (100%) and decreased hatching (80%) and heartbeat rates (60%). After 120 h exposure, NPLs (0.015 or 1.5 mg/L) + DPH (0.01 mg/L) decreased larvae swimming distance (30-40%). At the biochemical level, increased glutathione S-transferases (55-122%) and cholinesterase (182-343%) activities were found after 96 h exposure to NPLs (0.015 or 1.5 mg/L) + DPH (0.01 mg/L). However, catalase (CAT) activity remained similar to the control group in the mixtures, inhibiting the effects detected after the exposure to 1.5 mg/L NPLs alone (increased 230% of CAT activity). In general, the effects of dual combination - NPLs + DPH (even at concentrations as low as 10 μg/L of DPH) - were more harmful than the correspondent individual exposures, showing the synergistic interactions of the dual mixture and answering to the main question of this work. The obtained results, namely the altered toxicity patterns of NPLs + DPH compared with the individual exposures, show the importance of an environmental risk assessment considering NPLs as a co-contaminant due to the potential NPLs role as vector for other contaminants.

Remediation plan of nano/microplastic toxicity in food

Microplastic pollution is causing a stir globally due to its persistent and ubiquitous nature. The scientific collaboration is diligently working on improved, effective, sustainable, and cleaner measures to control the nano/microplastic load in the environment especially wrecking the aquatic habitat. This chapter discusses the challenges encountered in nano/microplastic control and improved technologies like density separation, continuous flow centrifugation, oil extraction protocol, electrostatic separation to extract and quantify the same. Although it is still in the early stages of research, biobased control measures, like meal worms and microbes to degrade microplastics in the environment have been proven effective. Besides the control measures, practical alternatives to microplastics can be developed like core-shell powder, mineral powder, and biobased food packaging systems like edible films and coatings developed using various nanotechnological tools. Lastly, the existing and ideal stage of global regulations is compared, and key research areas are pinpointed. This holistic coverage would enable manufacturers and consumers to reconsider their production and purchase decisions for sustainable development goals.

Nanoplastics in the soil environment: Analytical methods, occurrence, fate and ecological implications

Soils play a very important role in ecosystems sustainability, either natural or agricultural ones, serving as an essential support for living organisms of different kinds. However, in the current context of extremely high plastic pollution, soils are highly threatened. Plastics can change the chemical and physical properties of the soils and may also affect the biota. Of particular importance is the fact that plastics can be fragmented into microplastics and, to a final extent into nanoplastics. Due to their extremely low size and high surface area, nanoplastics may even have a higher impact in soil ecosystems. Their transport through the edaphic environment is regulated by the physicochemical properties of the soil and plastic particles themselves, anthropic activities and biota interactions. Their degradation in soils is associated with a series of mechanical, photo-, thermo-, and bio-mediated transformations eventually conducive to their mineralisation. Their tiny size is precisely the main setback when it comes to sampling soils and subsequent processes for their identification and quantification, albeit pyrolysis coupled with gas chromatography-mass spectrometry and other spectroscopic techniques have proven to be useful for their analysis. Another issue as a consequence of their minuscule size lies in their uptake by plants roots and their ingestion by soil dwelling fauna, producing morphological deformations, damage to organs and physiological malfunctions, as well as the risks associated to their entrance in the food chain, although current conclusions are not always consistent and show the same pattern of effects. Thus, given the omnipresence and seriousness of the plastic menace, this review article pretends to provide a general overview of the most recent data available regarding nanoplastics determination, occurrence, fate and effects in soils, with special emphasis on their ecological implications.

Quantification of ternary microplastic mixtures through an ultra-compact near-infrared spectrometer coupled with chemometric tools

The ubiquitous distribution of plastics and microplastics (MPs) and their resistance to biological and chemical decay is adversely affecting the environment. MPs are considered as emerging contaminants of concern in all the compartments, including terrestrial, aquatic, and atmospheric environments. Efficient monitoring, detection, and removal technologies require reliable methods for a qualitative and quantitative analysis of MPs, considering point-of-need testing a new evolution and a great trend at the market level. In the last years, portable spectrometers have gained popularity thanks to the excellent capability for fast and on-site measurements. Ultra-compact spectrometers coupled with chemometric tools have shown great potential in the polymer analysis, showing promising applications in the environmental field. Nevertheless, systematic studies are still required, in particular for the identification and quantification of fragments at the microscale. This study demonstrates the proof-of-concept of a Miniaturized Near-Infrared (MicroNIR) spectrometer coupled with chemometrics for the quantitative analysis of ternary mixtures of MPs. Polymers were chosen representing the three most common polymers found in the environment (polypropylene, polyethene, and polystyrene). Daily used plastic items were mechanically fragmented at laboratory scale mimicking the environmental breakdown process and creating "true-to-life" MPs for the assessment of analytical methods for MPs identification and quantification. The chemical nature of samples before and after fragmentation was checked by Raman spectroscopy. Sixty three different mixtures were prepared: 42 for the training set and 21 for the test set. Blends were investigated by the MicroNIR spectrometer, and the dataset was analysed using Principal Component Analysis (PCA) and Partial Least Square (PLS) Regression. PCA score plot showed a samples distribution consistent with their composition. Quantitative analysis by PLS showed the great capability prediction of the polymer's percentage in the mixtures, with R² greater than 0.9 for the three analytes and a low and comparable Root-Mean Square Error. In addition, the developed model was challenged with environmental weathered materials to validate the system with real plastic pollution. The findings show the feasibility of employing a portable tool in conjunction with chemometrics to quantify the most abundant forms of MPs found in the environment.

Environmental challenges of COVID-19 pandemic: resilience and sustainability - A review

The emergence of novel respiratory disease (COVID-19) caused by SARS-CoV-2 has become a public health emergency worldwide and perturbed the global economy and ecosystem services. Many studies have reported the presence of SARS-CoV-2 in different environmental compartments, its transmission via environmental routes, and potential environmental challenges posed by the COVID-19 pandemic. None of these studies have comprehensively reviewed the bidirectional relationship between the COVID-19 pandemic and the environment. For the first time, we explored the relationship between the environment and the SARS-CoV-2 virus/COVID-19 and how they affect each other. Supporting evidence presented here clearly demonstrates the presence of SARS-CoV-2 in soil and water, denoting the role of the environment in the COVID-19 transmission process. However, most studies fail to determine if the viral genomes they have discovered are infectious, which could be affected by the environmental factors in which they are found.The potential environmental impact of the pandemic, including water pollution, chemical contamination, increased generation of non-biodegradable waste, and single-use plastics have received the most attention. For the most part, efficient measures have been used to address the current environmental challenges from COVID-19, including using environmentally friendly disinfection technologies and employing measures to reduce the production of plastic wastes, such as the reuse and recycling of plastics. Developing sustainable solutions to counter the environmental challenges posed by the COVID-19 pandemic should be included in national preparedness strategies. In conclusion, combating the pandemic and accomplishing public health goals should be balanced with environmentally sustainable measures, as the two are closely intertwined.

In Situ Fluorescent Illumination of Microplastics in Water Utilizing a Combination of Dye/Surfactant and Quenching Techniques

Although plastics have benefited our lives in terms of cost and convenience, the disposal of end-of-life plastics poses environmental problems, such as microplastics (MPs). Although the separation (e.g., filtration) and staining of MPs with fluorescent dye/solvent are generally accepted steps to observe MPs in an environmental matrix, in this study, an in situ selective fluorescent illumination of the MPs in water was attempted with the aid of surfactant. Nonpolar fluorescent dye in combination with surfactant affords nanometer-sized dye particles in water, which adsorb on MPs and penetrate the polymer matrix for effective staining and stable fluorescent behaviors. The effects of different staining parameters, including different dyes, surfactants, staining temperatures, staining times, dye/surfactant ratios, dye/MP ratios, and MP concentrations in aqueous solutions were investigated to better understand staining conditions. More interestingly, non-adsorbed free dye molecules in the staining solution were almost completely fluorescence-quenched by introducing the quenching agent, aniline, while the fluorescence intensity of the stained MP was maintained. By staining MPs with a dye/surfactant combination and subsequently quenching with aniline, in situ selective fluorescent illumination of the MPs in water was successfully achieved, which may eliminate the tedious separation/filtration procedure of MPs to accomplish the quick detection or monitoring of MPs.

Nanoplastics: Status and Knowledge Gaps in the Finalization of Environmental Risk Assessments

Nanoplastics (NPs) are particles ranging in size between 1 and 1000 nm, and they are a form of environmental contaminant of great ecotoxicological concern. Although NPs are widespread across ecosystems, they have only recently garnered growing attention from both the scientific community and regulatory bodies. The present study reviews scientific literature related to the exposure and effects of NPs and identifies research gaps that impede the finalization of related environmental risk assessments (ERAs). Approximately 80 articles published between 2012 and 2021 were considered. Very few studies (eight articles) focused on the presence of NPs in biotic matrices, whereas the majority of the studies (62 articles) assessed the lethal and sublethal effects of NPs on aquatic and terrestrial organisms. Whilst many studies focused on nude NPs, only a few considered their association with different aggregates. Amongst NPs, the effects of polystyrene are the most extensively reported to date. Moreover, the effects of NPs on aquatic organisms are better characterized than those on terrestrial organisms. NP concentrations detected in water were close to or even higher than the sublethal levels for organisms. An ERA framework specifically tailored to NPs is proposed.