Fluorinated Surfactant Adsorption on Mineral Surfaces: Implications for PFAS Fate and Transport in the Environment

Curvature- and temperature-dependent transport of soluble surfactant mixtures to the air-aqueous surface with applications in fluorine-free firefighting foams

Understanding surfactant adsorption to air-water interfaces is crucial to eliminating toxic fluorocarbon-based surfactants while retaining firefighting performance. The adsorption of commercial siloxane and Glucopon surfactants is investigated by measuring dynamic surface tension at different length scales using a pendant drop tensiometer and capillary pressure microtensiometer (CPM) for millimeter and micrometer sized bubbles at 23 °C and 60 °C. Higher surfactant concentration and higher curvature favor surfactant adsorption. The effect of interfacial curvature can be rationalized by rescaling respective times scales for diffusion-limited adsorption. For constant area adsorption in the capillary pressure microtensiometer, surfactants relevant to firefighting foams show stepwise adsorption. Model mixtures of ethoxylated surfactants of different chain lengths also show this stepwise adsorption, suggesting heterogeneity in tail lengths in the commercial surfactants. Surfactant adsorption is modeled by treating the mixtures as a quasi-single component using the Ward-Tordai equation and the Langmuir adsorption isotherm to characterize the temperature-dependent surfactant properties. While temperature increases the diffusivity of both Dow 502W and Triton X100, Dow 502W demonstrates key differences in surfactant adsorption compared to Triton X100 and the Glucopon surfactants at elevated temperatures. A deeper understanding of how different head and tail group lengths and temperature affect surfactant adsorption will help optimize new surfactant replacements for enhanced firefighting performance.

Interference of PFAS sorption on zeolites from natural water characteristics

Per- and polyfluoroalkyl substances (PFAS) are emerging anthropogenic pollutants of concern and are associated with potential human and environmental health concerns. PFAS removal can be achieved using adsorbents such as activated carbon and ion exchange resins. Recently, zeolites have been identified as another potential adsorption technology with increased selectivity and product regenerability that is not currently achieved with other adsorbents. Zeolite CP814E∗ (BEA) was tested in batch reactions for PFAS removal in different water matrix characteristics, including pH, select cations, humic acids (HA), fulvic acids (FA), and natural organic matter (NOM). In synthetic EPA waters, BEA performance increased compared to ultrapure water testing. BEA performance also significantly increased in the presence of Na+, Ca2+, and Mg2+ ions compared to ultrapure waters. PFOA and PFOS sorption did not vary significantly in the 6-9 pH range. HA, FA, and NOM did not significantly impact the sorption of PFOA and PFOS on the BEA at 1 g/L zeolite loading. One organic interferent, Suwannee River humic acids, did reduce PFOA sorption when the ratio of adsorbent to liquid was reduced to 0.1 mg/L. BEA retained sorption capacity over seven thermal regeneration cycles, and a BEA test with a real water demonstrated PFOA, PFOS and PFHxS adsorption at the parts per trillion level.

PFAS removal via adsorption: A synergistic review on advances of experimental and computational approaches

Per- and polyfluoroalkyl substances (PFAS), commonly known as "forever chemicals", have become a major focus of current research due to their toxicity and persistence in the environment. These synthetic compounds are notoriously difficult to degrade, accumulating in water systems and posing long-term health and environmental risks. Adsorption is one of the most investigated technologies for PFAS removal. This review comprehensively reviewed the PFAS adsorption process, focusing not only on the adsorption itself, but also on the behavior of PFAS in the aquatic environment prior to adsorption because these behaviors directly affect PFAS adsorption. Significantly, this review summarized in detail the advances made in PFAS adsorption from the computational approach and emphasized the importance of integrated experimental and computational studies in gaining molecular-level understanding on the adsorption mechanisms of PFAS. Toward the end, the review identified several critical research gaps and suggested key interdisciplinary research needs for further advancing our understanding on PFAS adsorption.

Sorption and desorption of per-fluoroalkyl substances (PFAS) on waste containment liner components

This paper examines the sorption kinetics, isotherms and desorption behaviour of six per-fluoroalkyl substances (PFAS) from single- and multi-compound solutions with various landfill liner materials currently in use and those proposed for future lining systems. The compounds examined include perfluorooctanesulfonic acid, perfluorooctanoic acid, perfluorohexanoic acid, perfluorobutanesulfonic acid, pentafluoropropionic acid and trifluoromethanesulfonic acid. The impact of landfill leachate on the sorption properties of selected liner components, namely geotextiles, bentonite and a proposed bentonite modifier, was also investigated. No significant competitive effects on sorption were observed at typical environmental PFAS concentrations (1-80 nM). Biexponential and pseudo-second-order kinetics models sufficiently described the sorption process. Furthermore, the Freundlich isotherm model generally provided a better fit to the experimental data than the Langmuir model. The maximum PFAS sorption capacity for each material followed the order: ion exchange resin > activated carbon amended bentonite > clays > nonwoven polypropylene geotextile > woven polypropylene geotextile > bentonite > polyester nonwoven geotextile. Sorption generally increased with longer carbon-chain lengths, with sulfonate species exhibiting a stronger affinity than carboxylic acids. The desorption of PFAS from the liner constituents aligned with their sorption behaviour. The presence of matrix co-constituents in leachate reduced the sorptive affinity of most PFAS. The results suggest that incorporating activated carbon into geosynthetic clay liners may reduce the migration of long-chain PFAS but may be less effective for shorter-chain compounds. Adding additional sorptive materials to lining systems, such as ion exchange resins, may be necessary to effectively attenuate short and ultrashort PFAS compounds.

Structure, orientation, and dynamics of per- and polyfluoroalkyl substance (PFAS) surfactants at the air-water interface: Molecular-level insights

HYPOTHESIS

Understanding the intricate molecular-level details of toxic per- and polyfluoroalkyl substances (PFAS) partitioning to the air-water interface holds paramount importance in evaluating their fate and transport, as well as for finding safer alternatives for various applications, including aqueous film forming foams. The behavior of these substances at interfaces strongly depends on molecular architecture, chemistry, and concentration, which define molecular packing, self-assembly, interfacial diffusion, and the surface tension.

SIMULATIONS

Modeling of three PFAS surfactants, namely, longer-tail (perfluorooctanoate (PFOA)) and shorter-tail (perfluorobutanoate (PFBA) and 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy) propanoate (GenX)) has been conducted using atomistic molecular dynamics simulations. A systematic comparison between these representative PFAS of different sizes and structure reveals factors influencing their association behavior, mechanism of surface tension reduction, and interfacial mobility as a function of surface coverage.

FINDINGS

Shorter-chain PFAS surfactants (GenX or PFBA) require lower surface coverage compared to longer chain (PFOA) PFAS to achieve the same decrease in surface tension. However, a higher concentration of GenX and PFBA is necessary in the bulk aqueous solution to achieve the same surface coverage as PFOA, due to their higher solubility in water. The PFAS molecular orientation and mobility at the interface are found to be vastly influenced by the length and architecture of the hydrophobic fluorocarbon tail. A significant ordering of the water dipole moment near the anionic headgroup is apparent at high surface concentration. A direct correlation is established between the PFAS interfacial properties and PFAS-PFAS, PFAS-counterion, and PFAS-water interactions.

Out of sight, into the spotlight: Beyond the current state of science on per- and poly-fluoroalkyl substances in groundwater

Per- and poly-fluoroalkyl substances (PFAS) have emerged as a silent menace, infiltrating groundwater systems worldwide. Many countries, preoccupied with tackling legacy pollutants, have inadvertently neglected the emerging threat of PFAS. This review provides an exhaustive analysis beyond the current state of knowledge and sustainable pathways vis-a-vis addressing PFAS in groundwater systems globally. Despite the positive progression in PFAS research, significant knowledge gaps and paucity of data persist globally. Sampling trains, smart contaminant detectors, filters, and sensors offer promising pathways for the complete extraction and detection of novel and transformed PFAS species. Major hotspots are firefighting locations, landfills, and superfund sites. While studies have documented the global occurrence of PFAS in groundwater, with concentrations increasing over time and varying across regions, the factors influencing these trends, transport, fate, toxicity, and interactions with co-contaminants, remain largely unexplored. Advanced models accounting for environmental complexities and interactions are crucial for understanding PFAS migration in groundwater, however, their development is hindered by a scarcity of studies on the complexities and PFAS interactions. Emerging technologies, including nanotechnology, enzyme, genetic engineering, flexible treatment train, and machine learning algorithms present exciting opportunities for PFAS treatment, however, their cost-effectiveness, scalability, and long-term stability must be thoroughly investigated. Sustainable management requires addressing nomenclature inconsistencies and developing region-specific mitigative measures. These serve as a clarion call for the scientific community, policymakers, and stakeholders to unite in confronting the formidable challenges posed by PFAS contamination, as the fate of our groundwater resources and the well-being of countless lives hang in the balance.

Fractionation and tidal characteristics of per- and polyfluoroalkyl substances in the estuarine maximum turbidity zone

Complex tidal processes and suspended particulate matter (SPM) behavior influence the land-sea transport of terrestrial contaminants in estuaries. Contaminants are generally trapped within the estuarine maximum turbidity zone (MTZ), where SPM concentrations peak, misleading flux estimation. Here, we conducted high-resolution continuous sampling over two tidal cycles within the MTZ of a semidiurnal estuary. Tidal variations of per- and polyfluoroalkyl substances (PFAS), a class of persistent organic pollutants, were analyzed in dissolved water and size-fractionated SPM. Results showed that variations in dissolved PFAS may related to the mixing of upstream and downstream. The predominant size range for SPM was found in 1-31 μm (75 %, mainly 10-31 μm), but the PFAS tended to be sorbed by 0.22-1 μm (60 %) and > 31 μm (37 %) fractions. Except during periods of sediment resuspension when particulate PFAS concentration decreased, the PFAS concentration in the 1-31 μm increased during flood tides and decreased during ebb tides, which may not be related to organic carbon/elemental carbon levels. The hourly dynamic flux of dissolved-phase and particulate-phase PFAS transport to the sea in the MTZ was calculated by combining it with a hydrodynamic model. This study first highlights the size-fractionated PFAS transport under tidal influences and provides hourly flux estimation with a hydrodynamic model.

Bioaccumulation potentials of per-and polyfluoroalkyl substances (PFAS) in recreational fisheries: Occurrence, health risk assessment and oxidative stress biomarkers in coastal Biscayne Bay

Per-and polyfluoroalkyl substances (PFAS) are a group of synthetic, highly fluorinated, and emerging chemicals that are reported to be used for both industrial and domestic applications. Several PFAS have demonstrated persistent, bioaccumulative and toxic tendencies in marine organisms. Therefore, this research aims to characterize and quantify these compounds in both recreational fisheries and surface water samples, including estimating their bioaccumulation potentials. In addition, we assessed the potential contribution of biomonitoring tools such as oxidative stressors and morphological index on fish and ecological health. Finally, human health risk assessment was performed based on available toxicological data on limited PFAS. All PFAS were detected in at least one sample except for N-EtFOSAA in lobster which was below the method detection limit. ƩPFAS body burden ranged from 0.15 to 3.40 ng/g wet weight (ww) in blackfin tuna samples and 0.37-5.15 ng/g ww in lobster samples, respectively. Wilcoxon rank paired test (α = 0.05) shows that there is statistical significance (ρ < 0.05) of ƩPFAS between species. Bioaccumulation factors (BAF) suggest an increasing trend in PFAS classes (PFCAs < PFSAs < FTSs), with higher BAFs observed in tuna compared to lobster. Long-chain PFESAs and FASAA were reported at higher concentrations in lobster compared to Blackfin tuna due to their bioavailability through sediment-sorption interactions. Although Fulton's condition factor (FCF) indicates healthy fish conditions, oxidative stress biomarkers suggest that tuna and lobster might be under stress, which can weaken their immune system against exposure to emerging contaminants such as PFAS. Hazard risk (HR) suggests a low risk to human health based on the consumption of the studied species; however, the risk of contaminant exposure may be higher than estimated. This study is aimed at improving food safety by providing better understanding of how PFAS infiltrate into human diet and incorporating data on influence of contaminant exposure and environmental stressors on marine health.

Nanoscale exopolymer reassembly-trap mechanism determines contrasting PFOS exposure patterns in aquatic animals with different feeding habitats: A nano-visualization study

The behavior and fate of PFOS (perfluorooctanesulfonate) in the aquatic environment have received great attention due to its high toxicity and persistence. The nanoscale supramolecular mechanisms of interaction between PFOS and ubiquitous EPS (exopolymers) remain unclear though EPS have been widely-known to influence the bioavailability of PFOS. Typically, the exposure patterns of PFOS in aquatic animals changed with the EPS-PFOS interaction are not fully understood. This study hypothesized that PFOS exposure and accumulation pathways depended on the PFOS-EPS interactive assembly behavior and animal species. Two model animals, zebrafish and chironomid larvae, with different feeding habitats were chosen for the exposure and accumulation tests at the environmental concentrations of PFOS in the absence and presence of EPS. It was found that PFOS triggered the self-assembly of EPS to form large aggregates which significantly trapped PFOS. PFOS accumulation was significantly promoted in zebrafish but drastically reduced in chironomid larvae because of the nanoscale interactive assembly between EPS and PFOS. The decreased dermal uptake but increased oral uptake of PFOS by zebrafish with large mouthpart size could be ascribed to the increased ingestion of PFOS-enriched EPS aggregates as food. For the chironomid larvae with small mouthpart size, the PFOS-EPS assemblies reduced the dermal, oral and intestinal uptake of PFOS. The nano-visualization evidences confirmed that the PFOS-enriched EPS-PFOS assemblies blocked PFOS penetration through skin of both animals. These findings provide novel knowledge about the ecological risk of PFOS in aquatic environments.

Causative mechanisms limiting the removal efficiency of short-chain per- and polyfluoroalkyl substances (PFAS) by activated carbon

Short-chain per and polyfluoroalkyl substances (PFAS) have been found to be relatively high in water treatment systems compared to long-chain PFAS because of the unsatisfactory adsorption efficiency of short-chain PFAS. Knowledge about why short-chain PFAS are less removed by porous carbon is very limited. The study focused on providing causal mechanisms that link the low adsorption of short-chain PFAS and proposing an improved method for removing both short- and long-chain PFAS. The long-chain PFAS with higher hydrophobicity diffused more quickly than the short-chain PFAS due to stronger partitioning driving forces. In the initial adsorption stage, therefore, pores of activated carbon were blocked by long-chain PFAS, which makes it difficult for the short-chain PFAS to enter the internal pores. Although several short-chain PFAS diffuse into the pores, the relatively more hydrophilic short-chain congeners cannot be fully adsorbed on activated carbon due to limited positively charged sites. Moreover, compared to larger particle sizes, smaller activated carbon particles have shorter pore channels near the surface, reducing the risk of pore-blocking and ensuring the pores remain accessible for more efficient adsorption. Additionally, these smaller particles offer a greater external surface area and more functional groups, which enhance the adsorption capacity. It indicates that the smaller particle size of activated carbon would have a positive effect on the short-chain PFAS removal.

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Super-resistance of PFOS in water: Is it beatable?

In this study, we present research on PFOS occurrence in surface and groundwater in Croatia. PFOS was detected and quantified at ultra-low concentrations (even ng/L) by means of LC-QTOF-MS analysis. PFOS was treated with solar photocatalysis using different reactor types, different irradiation intensities and photocatalytic formulations. Most experiments ended with only a slight change in PFOS concentrations, proving its super-resistance toward UV irradiation and oxidative species, e.g. OH radicals. In certain experiments, PFOS degradation extents were approximately 20% after 120 min of the photocatalytic process. Additionally, photocatalysis was coupled with ultrasound to increase PFOS degradation products, we discussed the tentative degradation mechanism and proposed a solution how to possibly beat its super-resistance.

Surface Science View of Perfluoroalkyl Acids (PFAAs) in the Environment

Per- and polyfluoroalkyl substances (PFAS) constitute a notorious category of anthropogenic contaminants, detected across various environmental domains. Among these PFAS, perfluoroalkyl acids (PFAAs) stand out as a focal point in discussions due to their historical industrial utilization and environmental prominence. Their extensive industrial adoption is a direct consequence of their remarkable stability and outstanding amphiphilic properties. However, these very traits that have made PFAAs industrially desirable also render them environmentally catastrophic, leading to adverse consequences for ecosystems. The amphiphilic nature of PFAAs has made them highly unique in the landscape of anthropogenic contaminants and, thereby, difficult to study. We believe that well-established principles from surface science can connect the amphiphilic nature of PFAAs to their accumulation and transport in the environment. Specifically, we discuss the role of interfacial science in describing the stability, interfacial uptake (air-liquid and solid-liquid), and wetting capability of PFAAs. Surface science principles can provide new insights into the environmental fate of PFAAs, as well as provide context on their deleterious effects on both the environment and human health.

Influence of surfactant molecular features on tetracycline transport in saturated porous media of varied surface heterogeneities

This study aims to understand how surfactants affect the mobility of tetracycline (TC), an antibiotic, through different aquifer media. Two anionic and cationic surfactants, sodium dodecylbenzene sulfonate (SDBS) and cetyltrimethyl ammonium bromide (CTAB), were used to study their influence on TC mobility through clean sand and humic acid (HA)-coated sand. HA coating inhibits TC mobility due to its strong interaction with TC. Both surfactants promoted TC mobility at pH 7.0 due to competitive deposition, steric effect, and increased hydrophilicity of TC. CTAB had a more substantial effect than SDBS, related to the surfactants' molecular properties. Each surfactant's promotion effects were greater in HA-coated sand than in quartz sand due to differences in surfactant retention. CTAB inhibited TC transport at pH 9.0 due to its significant hydrophobicity effect. Furthermore, in the presence of Ca2+, SDBS enhanced TC transport by forming deposited SDBS-Ca2+-TC complexes. On the other hand, CTAB increased TC mobility due to its inhibition of cation bridging between TC and porous media. The findings highlight surfactants' crucial role in influencing the environmental behaviors of tetracycline antibiotics in varied aquifers.

The Dynamics of Per- and Polyfluoroalkyl Substances (PFAS) at Interfaces in Porous Media: A Computational Roadmap from Nanoscale Molecular Dynamics Simulation to Macroscale Modeling

Managing and remediating perfluoroalkyl and polyfluoroalkyl substance (PFAS) contaminated sites remains challenging. The major reasons are the complexity of geological media, partly unknown dynamics of the PFAS in different phases and at fluid-fluid and fluid-solid interfaces, and the presence of cocontaminants such as nonaqueous phase liquids (NAPLs). Critical knowledge gaps exist in understanding the behavior and fate of PFAS in vadose and saturated zones and in other porous media such as concrete and asphalt. The complexity of PFAS-surface interactions warrants the use of advanced characterization and computational tools to understand and quantify nanoscale behavior of the molecules. This can then be upscaled to the microscale to develop a constitutive relationship, in particular to distinguish between surface and bulk diffusion. The dominance of surface diffusion compared to bulk diffusion results in the solutocapillary Marangoni effect, which has not been considered while investigating the fate of PFAS. Without a deep understanding of these phenomena, derivation of constitutive relationships is challenging. The current Darcy scale mass-transfer models use constitutive relationships derived from either experiments or field measurements, which makes their applicability potentially limited. Here we review current efforts and propose a roadmap for developing Darcy scale transport equations for PFAS. We find that this needs to be based on systematic upscaling of both experimental and computational studies from nano- to microscales. We highlight recent efforts to undertake molecular dynamics simulations on problems with similar levels of complexity and explore the feasibility of conducting nanoscale simulations on PFAS dynamics at the interface of fluid pairs.

The significance of fluorinated compound chain length, treatment technology, and influent composition on per- and polyfluoroalkyl substances removal in worldwide wastewater treatment plants

Wastewater treatment plants (WWTPs) are deemed major conveyors and point sources of per- and polyfluoroalkyl substances (PFAS) to the environment. This statistical meta-analysis of existing literature from the past 15 years focused on the significance of treatment type for PFAS removal efficiencies and the influence of PFAS sources (domestic vs. industrial) on their removal. Different sampling events, WWTPs across the world, different treatment technologies, configurations, and processes, as well as different PFAS classes and compounds were considered. This study evaluated 13 PFAS analyzed predominantly in 161 WWTPs across the world. The statistical test results revealed that these 13 frequently detected and reported PFAS can be divided into four groups based on their behavior during wastewater treatment, namely (1) C6-10 perfluorocarboxylic acids (PFCAs), (2) C4,5,11,12 PFCAs, (3) C4,6,8 perfluoroalkane sulfonic acids (PFSAs), and (4) C10 PFSA. In this study, biological treatments such as (1) membrane bioreactors, (2) combination of two or more biological treatments, and (3) biofilm processes revealed the highest PFAS removals, although the addition of a tertiary treatment actually had a nonbeneficial effect on PFAS removal. Moreover, a strong statistical correlation was observed between industrial wastewater sources and the presence of high influent PFAS concentrations in the receiving WWTPs. This indicates that industrial sources were the main contributors of the PFAS load in the analyzed WWTPs. Integr Environ Assess Manag 2024;20:59-69. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Evaluation of Pure PFAS Decrease in Controlled Settings

Since 1940, poly- or perfluorinated alkyl substances (PFAS) have been largely used in many applications, including paints, fire foaming, household items, product packaging, and fabrics. Because of their extremely high persistency, they have been defined as "forever chemicals". Although the EU is taking action to reduce their use, their widespread occurrence in environmental matrices and their harmful effects on human health require the use of highly performing analytical methods for efficient monitoring. Furthermore, novel PFAS are constantly revealed by both EU and National environmental agencies. The objective of this work is to investigate the cause of the signal decrease during the analysis of a standard PFAS mixture in water-based matrices, by proposing an efficient technical procedure for laboratory specialists. The analyses were carried out on a mixture of 30 PFAS, including both regulated and unknown substances (which are expected to be introduced in the guidelines), characterized by different chemical features, using LC-vials of two different materials, namely, glass and polypropylene, and dissolved in two solvents, namely, water and water-methanol. The temperature of analysis and the concentration of PFAS were also considered through LC-MS analyses at different times, in the 0-15 h range. Depending on the chemical structure and length of the PFAS, sampling and treatment procedures may be adopted to tackle the decrease and the release from the containers, reducing the risk of underestimating PFAS also in real water matrices.

Prevalence and Source Tracing of PFAS in Shallow Groundwater Used for Drinking Water in Wisconsin, USA

Samples from 450 homes with shallow private wells throughout the state of Wisconsin (USA) were collected and analyzed for 44 individual per- and polyfluoroalkyl substances (PFAS), general water quality parameters, and indicators of human waste as well as agricultural influence. At least one PFAS was detected in 71% of the study samples, and 22 of the 44 PFAS analytes were detected in one or more samples. Levels of PFOA and/or PFOS exceeded the proposed Maximum Contaminant Levels of 4 ng/L, put forward by the U.S. Environmental Protection Agency (EPA) in March 2023, in 17 of the 450 samples, with two additional samples containing PFHxS ≳ 9 ng/L (the EPA-proposed hazard index reference value). Those samples above the referenced PFAS levels tend to be associated with developed land and human waste indicators (artificial sweeteners and pharmaceuticals), which can be released to groundwater via septic systems. For a few samples with levels of PFOA, PFOS, and/or PFHxS > 40 ng/L, application of wastes to agricultural land is a possible source. Overall, the study suggests that human waste sources, septic systems in particular, are important sources of perfluoroalkyl acids, especially ones with ≤8 perfluorinated carbons, in shallow groundwater.

Research Priorities for the Environmental Risk Assessment of Per- and Polyfluorinated Substances

Per- and polyfluorinated substances (PFAS) are a group of thousands of ubiquitously applied persistent industrial chemicals. The field of PFAS environmental research is developing rapidly, but suffers from substantial biases toward specific compounds, environmental compartments, and organisms. The aim of our study was therefore to highlight current developments and to identify knowledge gaps and subsequent research needs that would contribute to a comprehensive environmental risk assessment for PFAS. To this end, we consulted the open literature and databases and found that knowledge of the environmental fate of PFAS is based on the analysis of <1% of the compounds categorized as PFAS. Moreover, soils and suspended particulate matter remain largely understudied. The bioavailability, bioaccumulation, and food web transfer studies of PFAS also focus on a very limited number of compounds and are biased toward aquatic biota, predominantly fish, and less frequently aquatic invertebrates and macrophytes. The available ecotoxicity data revealed that only a few PFAS have been well studied for their environmental hazards, and that PFAS ecotoxicity data are also strongly biased toward aquatic organisms. Ecotoxicity studies in the terrestrial environment are needed, as well as chronic, multigenerational, and community ecotoxicity research, in light of the persistency and bioaccumulation of PFAS. Finally, we identified an urgent need to unravel the relationships among sorption, bioaccumulation, and ecotoxicity on the one hand and molecular descriptors of PFAS chemical structures and physicochemical properties on the other, to allow predictions of exposure, bioaccumulation, and toxicity. Environ Toxicol Chem 2023;42:2302-2316. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Molecular detection of per- and polyfluoroalkyl substances in water using time-of-flight secondary ion mass spectrometry

Detection of per- and polyfluoroalkyl substances (PFASs) is crucial in environmental mitigation and remediation of these persistent pollutants. We demonstrate that time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a viable technique to analyze and identify these substances at parts per trillion (ppt) level in real field samples without complicated sample preparation due to its superior surface sensitivity. Several representative PFAS compounds, such as perfluorooctanesulfonic acid (PFOS), perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluoheptanoic acid (PFHpA), and perfluorononanoic acid (PFNA), and real-world groundwater samples collected from monitoring wells installed around at a municipal wastewater treatment plant located in Southern California were analyzed in this work. ToF-SIMS spectral comparison depicts sensitive identification of pseudo-molecular ions, characteristic of reference PFASs. Additionally, principal component analysis (PCA) shows clear discrimination among real samples and reference compounds. Our results show that characteristic molecular ion and fragments peaks can be used to identify PFASs. Furthermore, SIMS two-dimensional (2D) images directly exhibit the distribution of perfluorocarboxylic acid (PFCA) and PFOS in simulated mixtures and real wastewater samples. Such findings indicate that ToF-SIMS is useable to determine PFAS compounds in complex environmental water samples. In conclusion, ToF-SIMS provides simple sample preparation and high sensitivity in mass spectral imaging, offering an alternative solution for environmental forensic analysis of PFASs in wastewater in the future.

Uptake and release of perfluoroalkyl carboxylic acids (PFCAs) from macro and microplastics

Microplastics and per- and polyfluoroalkyl substances (PFAS) are two of the most notable emerging contaminants reported in the environment. Micron and nanoscale plastics possess a high surface area-to-volume ratio, which could increase their potential to adsorb pollutants such as PFAS. One of the most concerning sub-classes of PFAS are the perfluoroalkyl carboxylic acids (PFCAs). PFCAs are often studied in the same context as other environmental contaminants, but their amphiphilic properties are often overlooked in determining their fate in the environment. This lack of consideration has resulted in a diminished understanding of the environmental mobility of PFCAs, as well as their interactions with environmental media. Here, we investigate the interaction of PFCAs with polyethylene microplastics, and identify the role of environmental weathering in modifying the nature of interactions. Through a series of adsorption-desorption experiments, we delineate the role of the fluoroalkyl tail in the binding of PFCAs to microplastics. As the number of carbon atoms in the fluoroalkyl chain increases, there is a corresponding increase in the adsorption of PFCAs onto microplastics. This relationship can become modified by environmental weathering, where the PFCAs are released from the macro and microplastic surface after exposure to simulated sunlight. This study identifies the fundamental relationship between PFCAs and plastic pollutants, where they can mutually impact their thermodynamic and transport properties.

Transport behavior difference and transport model of long- and short-chain per- and polyfluoroalkyl substances in underground environmental media: A review

Perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFSAs), which are the most commonly regulated and most widely concerned per- and polyfluoroalkyl substances (PFAS) have received increasing attention on a global scale due to their amphiphilicity, stability, and long-range transport. Thus, understanding the typical PFAS transport behavior and using models to predict the evolution of PFAS contamination plumes is important for evaluating the potential risks. In this study, the effects of organic matter (OM), minerals, water saturation, and solution chemistry on the transport and retention of PFAS were investigated, and the interaction mechanism between long-chain/short-chain PFAS and the surrounding environment was analyzed. The results revealed that high content of OM/minerals, low saturation, low pH, and divalent cation had a great retardation effect on long-chain PFAS transport. The retention caused by hydrophobic interaction was the prominent mechanism for long-chain PFAS, whereas, the retention caused by electrostatic interaction was more relevant for short-chain PFAS. Additional adsorption at the air-water and nonaqueous-phase liquids (NAPL)-water interface was another potential interaction for retarding PFAS transport in the unsaturated media, which preferred to retard long-chain PFAS. Furthermore, the developing models for describing PFAS transport were investigated and summarized in detail, including the convection-dispersion equation, two-site model (TSM), continuous-distribution multi-rate model, modified-TSM, multi-process mass-transfer (MPMT) model, MPMT-1D model, MPMT-3D model, tempered one-sided stable density transport model, and a comprehensive compartment model. The research revealed PFAS transport mechanisms and provided the model tools, which supported the theoretical basis for the practical prediction of the evolution of PFAS contamination plumes.

Effect of two sorbents on the distribution and transformation of N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA) in soil-soybean systems

The broad application of perfluoroalkyl acid (PFAA) precursors has led to their occurrence in soil, resulting in potential uptake and bioaccumulation in plants. In this study, we investigated the effect of powdered activated carbon (PAC) and montmorillonite on the distribution and transformation of a perfluorooctanesulfonic acid (PFOS) precursor, N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA), in soil-plant systems. The results showed that N-EtFOSAA at 300 μg/kg was taken up by soybean roots and shoots together with its transformation products (i.e., perfluorooctane sulfonamide (PFOSA), PFOS), while decreasing the biomass of shoots and roots by 47.63% and 61.16%, respectively. PAC amendment significantly reduced the water leachable and methanol extractable N-EtFOSAA and its transformation products in soil. In the presence of soybean and after 60 days, 73.5% of the initially spiked N-EtFOSAA became non-extractable bound residues. Compared to the spiked controls, the PAC addition also decreased the total plant uptake of N-EtFOSAA by 94.96%. In contrast, montmorillonite showed limited stabilization performance for N-EtFOSAA and its transformation products and was ineffective to lower their bioavailability. Overall, the combination of PAC and soybean was found to be effective in immobilizing N-EtFOSAA in soil.

Adsorption of PFAAs in the Vadose Zone and Implications for Long-Term Groundwater Contamination

Perfluoroalkyl acids (PFAAs) are persistent environmental contaminants that sorb to air-water and solid interfaces throughout the vadose zone. These sorption processes lead to decadal leaching of PFAS from the source zones to groundwater systems. While these processes are increasingly well understood, critical gaps exist in describing the vertically variable adsorption in the presence of vadose zone heterogeneity and methods for efficiently upscaling the laboratory observations to predict field-scale PFAA transport and retardation. In this work, we build upon fundamental theories and scalable relationships to define a semi-analytical framework for synthesizing and upscaling PFAA adsorption in heterogeneous vadose zone systems. Solid-phase and air-water interfacial adsorption are quantified mechanistically for several PFAAs and then applied to a contaminated site in Northern Wisconsin. The results highlight the dominance of air-water and organic carbon solid-phase adsorption processes in the vadose zone. Strong sorption heterogeneity─driven by depth-dependent adsorption mechanisms─produces complex spatially variable retardation profiles. We develop vadose zone retardation potentials to quantify this field-scale heterogeneity and propose vertical integration methods to upscale spatially resolved information for transport modeling. This work highlights the importance of accounting for multiscale and multiprocess heterogeneity for accurately describing and predicting the long-term fate and transport of PFAAs in the subsurface.

Wettability Alteration Using Silane to Improve Water-Alternating-Gas Injectivity

Wettability is a main component that determines multiphase flow characteristics in a porous medium. Altering the wettability of a rock has a wide range of applications in the field of geosystems engineering, such as enhanced oil recovery, improving gas well deliverability, and geological CO₂ sequestration. Considering how injectivity in many field water-alternating-gas (WAG) processes is lower than expected, wettability alteration is especially suitable to address the reduction in relative permeability encountered during water injection. Several methods for injectivity improvement exist, including the use of surfactants, nanoparticles, salts, and alkalis. Using silanes to modify wettability has been a prominent technique in surface chemistry for decades but has very rarely been applied to porous mineral rocks, especially carbonates. This work explores the use of silanes to render sandstone and limestone surfaces more hydrophobic, thereby reducing gas blockage that causes injectivity loss. Contact angle measurements were taken and showed good wettability alteration away from water wet, exhibiting contact angles well above 90°, regardless of treatment conditions. Centrifuge tests were carried out, and the resulting residual fluid saturations and capillary pressure curves proved that the treatment is also effective on the pore scale. Corefloods conducted in sandstone and limestone cores showed a 45 and 65% increase in water relative permeability after WAG cycles after treatment, respectively. This translates directly to improvements in injectivity based on this treatment method.

Pollutant source or sink? Adsorption and mobilization of PFOS and PFOA from sediments in a large shallow lake with extended reed belt

In this study, we i) assessed the occurrence of perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) in sediments, pore water, and bulk water from three different areas in Lake Neusiedl, Austria, and ii) investigated mechanisms regulating adsorption and remobilization of these substances under different conditions via multiple lab-scale experiments. The adsorption capacity was mainly influenced by sediments' organic matter content, oxide composition, and pre-loading. Results suggest that a further increase of PFAS-concentrations in the open lake can be partly buffered by sediment transport to the littoral zone and adsorption to sediments in the extended reed belt. But, under current conditions, the conducted experiments revealed a real risk for mobilization of PFOS and PFOA from reed belt sediments that may lead to their transport back into the lake. The amount of desorbed PFAS is primarily dependent on water/sediment- or pore water/water-ratios and the concentration gradient. In contrast, water matrix characteristics and oxygen levels played a minor role in partitioning. The highest risk for remobilizing PFOS and PFOA was observed in experiments with sediments taken near the only major tributary to the lake (river Wulka), which had the highest pre-loading. The following management advice for water transport between high and low polluted areas can be derived based on the results. First, to reduce emissions into Lake waters from polluted tributaries like the Wulka river, we recommend diffuse pathways through the reed belt in the lake's littoral to reduce pollutant transport into the Lake and avoid high local sediment loadings. Second, water exchange with dried-up areas with probable higher loadings should be carefully handled and monitored to avoid critical back transport in the open lake. And third, general work in the reed belt or generally in the reed should be accompanied by monitoring to prevent uncontrolled remobilization in the future.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Changing bioavailability of per- and polyfluoroalkyl substances (PFAS) to plant in biosolids amended soil through stabilization or mobilization

Biosolids containing per- and polyfluoroalkyl substances (PFAS) could contaminate the receiving environments once they are land applied. In this study, we evaluated the feasibility of controlling the bioavailability of PFAS in biosolids to timothy-grass through stabilization or mobilization approaches. Stabilization was accomplished by adding a sorbent (i.e. granular activated carbon (GAC), RemBind, biochar) to biosolids, while mobilization was achieved by adding a surfactant, sodium dodecyl sulphate (SDS), to biosolids. The results showed that the ΣPFAS concentration in grass shoots grown in biosolids amended soil treated by GAC or RemBind at 2% was only 2.77% and 3.35% of the ΣPFAS concentration detected in shoots grown in biosolids amended soil without a sorbent, respectively, indicating the effectiveness of GAC and RemBind for stabilizing PFAS and reduce their bioavailability. On the other hand, mobilization by adding SDS to biosolids at a dose range of 10-100 mg/kg significantly increased the plant uptake of ΣPFAS by 15.48%-108.57%. Thus, mobilization by adding SDS could be a valuable approach for enhancing the PFAS removal if phytoremediation is applied. Moreover, higher rate of PFAS uptake took place after grass cutting was observed in this study. Thus, proper mowing and regrowth of timothy-grass could lead to efficient and cost-effective removal of PFAS from biosolids amended soil through phytoremediation and leave the site clean to be used for other purposes.

Functionalized-MXene Thin-Film Nanocomposite Hollow Fiber Membranes for Enhanced PFAS Removal from Water

Due to adverse health effects and the broad sources of per- and polyfluoroakyl substances (PFAS), PFAS removal is a critical research area in water purification. We demonstrate the functionalization of thin-film composite (TFC) hollow fiber nanofiltration (HFN) membranes by MXene nanosheets during the interfacial polymerization (IP) process for enhanced removal of perfluorooctane sulfonic acid (PFOS) from water. A MXene-polyamide (PA) selective layer was fabricated on top of a polysulfone (PSF) hollow fiber support via IP of trimesoyl chloride (TMC) and a mixture of piperazine (PIP) and MXene nanosheets to form MXene-PA thin-film nanocomposite (TFN) membranes. Incorporating MXene nanosheets during the IP process tuned the morphology and negative surface charge of the selective layer, resulting in enhanced PFOS rejection from 72% (bare TFC) to more than 96% (0.025 wt % MXene TFN), while the water permeability was also increased from 13.19 (bare TFC) to 29.26 LMH/bar (0.025 wt % MXene TFN). Our results demonstrate that both electrostatic interaction and size exclusion are the main factors governing the PFOS rejection, and both are determined by PA selective layer structural and chemical properties. The lamella structure and interlayer of MXene nanosheets inside the PA layer provided different transport mechanisms for water, ions, and PFAS molecules, resulting in enhanced water permeability and PFAS rejection due to traveling through the membrane by both diffusions through the PA layer and the MXene intralayer channels. MXene nanosheets showed very promising capability as a 2D additive for tuning the structural and chemical properties of the PA layer at the permeability-rejection tradeoff.

A dual grafted fluorinated hydrocarbon amine weak anion exchange resin polymer for adsorption of perfluorooctanoic acid from water

Perfluorooctanoic acid (PFOA) is a persistent and recalcitrant organic contaminant of exceptional environmental concern, and its removal from water has increasingly attracted global attention due to its wide distribution and strong bioaccumulation. Adsorption is considered an effective technique for PFOA removal and more efficient PFOA sorbents are still of interest. This study developed a dual grafted fluorinated hydrocarbon amine weak anion exchange (WAX) polymeric resin (Sepra-WAX-KelF-PEI) for PFOA removal from water. This polymer was synthesized by a two-step amine grafting reaction procedure involving first the reaction of the Sepra-WAX hydrocarbon polymer with poly(vinylidinefluoride-chlorotrifluoroethylene) (Kel-F 800) and then a second reaction with polyethyleneimine (PEI). Characterization of the synthesized polymers was performed using scanning electron microscopy and elemental analysis (F and Cl) by energy dispersive X-ray spectroscopy. The PFOA adsorption performance evaluations were conducted by packed column flow analyses with on-line detection. The results show the breakthrough of the Sepra-WAX-KelF-PEI synthesized with optimum stoichiometry was two times better than the starting anion exchange polymer Sepra-WAX, and six times better than powdered activated carbon, when using the same column size. The adsorption mechanisms of this novel adsorbent including hydrophobic interaction and electrostatic interaction were also clarified in this study. The adsorption kinetic parameters of the two optimum synthesized sorbents were determined using the Thomas model, the Yoon-Nelson model, and batch isotherm studies, and compared with those found with activated carbon and the starting WAX resin. Good agreement of the batch isotherm and column studies with respect to adsorption capacities trends between all three polymers (Sepra-WAX, Sepra-WAX-KelF, and Sepra-WAX-KelF-PEI) were noted.

Surfactants for Electrophoretic Deposition of Polyvinylidene Fluoride–Silica Composites

This investigation is motivated by the numerous advantages of electrophoretic deposition (EPD) for the fabrication of polyvinylidene fluoride (PVDF) and composite coatings and the various applications of such coatings. It is demonstrated that gallic acid (GA), caffeic acid (CFA), cholic acid (CA) and 2,3,4 trihydroxybenzoic acid (THB) can be used as charging and dispersing agents for the EPD of PVDF. The deposition yield of PVDF increases in the following order: THB < CFA < CA < GA. Test results indicate that the chemical structure of the dispersants exerts influence on the deposition efficiency. Potentiodynamic and impedance spectroscopy studies show the corrosion protection properties of PVDF coatings. GA is used for the co-EPD of PVDF with nanosilica and micron-size silica. The silica content in the composite coatings is varied by the variation of silica content in the suspensions. The ability to use GA as a charging and dispersing agent for the co-EPD of materials of different types paves the way for the fabrication of advanced organic–inorganic composites using EPD.

Ultra-Short-Chain PFASs in the Sources of German Drinking Water: Prevalent, Overlooked, Difficult to Remove, and Unregulated

Per- and polyfluoroalkyl substances (PFASs) have been a focal point of environmental chemistry and chemical regulation in recent years, culminating in a shift from individual PFAS regulation toward a PFAS group regulatory approach in Europe. PFASs are a highly diverse group of substances, and knowledge about this group is still scarce beyond the well-studied, legacy long-chain, and short-chain perfluorocarboxylates (PFCAs) and perfluorosulfonates (PFSAs). Herein, quantitative and semiquantitative data for 43 legacy short-chain and ultra-short-chain PFASs (≤2 perfluorocarbon atoms for PFCAs, ≤3 for PFSAs and other PFASs) in 46 water samples collected from 13 different sources of German drinking water are presented. The PFASs considered include novel compounds like hexafluoroisopropanol, bis(trifluoromethylsulfonyl)imide, and tris(pentafluoroethyl)trifluorophosphate. The ultra-short-chain PFASs trifluoroacetate, perfluoropropanoate, and trifluoromethanesulfonate were ubiquitous and present at the highest concentrations (98% of sum target PFAS concentrations). "PFAS total" parameters like the adsorbable organic fluorine (AOF) and total oxidizable precursor (TOP) assay were found to provide only an incomplete picture of PFAS contamination in these water samples by not capturing these highly prevalent ultra-short-chain PFASs. These ultra-short-chain PFASs represent a major challenge for drinking water production and show that regulation in the form of preventive measures is required to manage them.

Fluorinated surfactants: A review on recent progress on synthesis and oilfield applications

The selection of appropriate chemicals and the synthetic method plays an important role in oilfield application. The objectives of this study are to describe the various synthetic route for the preparation of fluorinated surfactants and highlight their oilfield applications. Fluorinated surfactants are the type of surfactants where the hydrophobic tail is either partially fluorinated or replaced totally with fluorine molecules. Fluorinated surfactants have distinct properties compared to corresponding hydrocarbon surfactants such as lower surface tension, better efficiency in lowering the interfacial tension, both oleophobic and hydrophobic nature, high thermal stability, and better chemical tolerance. These properties make them a material of choice for several applications which include but are not limited to fire-fighting, household items, foaming, coating, and paints. Despite these attractive properties, environmental concerns associated with fluorinated surfactants is a major hurdle in extending the application of such surfactants. This review discusses the various synthetic routes for the synthesis of different classes of surfactants such as cationic, anionic, non-ionic, and zwitterionic surfactants. The fundamental surface/interface properties of the synthesized surfactants are also highlighted. In addition, the review highlights the application of fluorinated surfactants in the oil & gas industry.

GenX in water: Interactions and self-assembly

2,3,3,3-tetrafluoro-2-(heptafluoropropoxy) propanoate, a.k.a. "GenX", is a surfactant introduced as a safer alternative to replace perfluorooctanoate (PFOA) in the manufacturing of fluorinated polymers, however, GenX is shown to cause adverse health effects similar to, or even worse than, those of the legacy PFOA. With an overarching goal to understand the behavior of GenX molecules in aqueous media, we report here on GenX micelle formation and structure in aqueous solutions, on the basis of results obtained from a combination of experimental techniques such as surface tension, fluorescence, viscosity, and small-angle neutron scattering (SANS), and molecular dynamics (MD) simulations. To our best knowledge, this is the first report on GenX micelles. The critical micelle concentration (CMC) of GenX ammonium salt in water is 175 mM. GenX forms small micelles with association number 6-8 and 10 Å radius. GenX molecules prefer to align along the micelle surface, and the ether oxygen of GenX has very little interaction with and exposure to water. Information on the surfactant and interfacial properties of GenX is crucial, since such properties are manifestations of interactions between GenX molecules and between GenX and water molecules and, in turn, the amphiphilic character of GenX dictates its fate and transport in the aqueous environment, its interactions with various biomolecules, and its binding to adsorbent materials.

Adsorption of perfluorooctanoic acid from water by pH-modulated Brönsted acid and base sites in mesoporous hafnium oxide ceramics

Per- and polyfluoroalkyl substances (PFAS) are increasingly appearing in drinking water sources globally. Our work focuses specifically on the adsorption of the legacy perfluorooctanoic acid (PFOA) using mesoporous hafnium oxide (MHO) ceramic synthesized via a sol-gel process. Experiments were performed at varying pH to determine the effect of surface charge on adsorption capacity of PFOA by MHO, and to postulate adsorption behavior. At pH 2.3, the adsorption capacity of PFOA on MHO was 20.9 mg/g, whereas at a higher pH of 6.3, it was much lower at 9.2 mg/g. This was due to increased coulombic attractions at lower pH between the positively charged conjugate acid active sites on MHO surface and negatively charged deprotonated PFOA anion in solution. After adsorption, the solid MHO was regenerated via calcination, reducing the amount of toxic solid waste to be disposed since the adsorbent is regenerated, and the PFOA is completely removed.

•

The adsorption capacity of PFOA by MHO was determined to be 20.9 mg/g at pH 2.3

•

As pH increased, the adsorption capacity of MHO decreased due to Coulombic repulsions

•

MHO could be regenerated via calcination to limit the amount of toxic waste produced

Per- and poly-fluoroalkyl substance remediation from soil and sorbents: A review of adsorption behaviour and ultrasonic treatment

Per- and poly-fluoroalkyl substances (PFAS) are xenobiotics, present at variable concentrations in soils and groundwater worldwide. Some of the current remediation techniques being researched or applied for PFAS-impacted soils involve solidification-stabilisation, soil washing, excavation and disposal to landfill, on site or in situ smouldering, thermal desorption, ball milling and incineration. Given the large volumes of soil requiring treatment, there is a need for a more environmentally friendly technique to remove and treat PFASs from soils. Sorbents such as granular/powdered activated carbon, ion exchange resins and silicas are used in water treatment to remove PFAS. In this work, PFAS adsorption mechanisms and the effect of pore size, pH and organic matter on adsorption efficacy are discussed. Then, adsorption of PFAS to soils and sorbents is considered when assessing the viability of remediation techniques. Sonication-aided treatment was predicted to be an effective removal technique for PFAS from a solid phase, and the effect of varying frequency, power and particle size on the effectiveness of the desorption process is discussed. Causes and mitigation strategies for possible cavitation-induced particle erosion during ultrasound washing are also identified. Following soil remediation, degrading the extracted PFAS using sonolysis in a water-organic solvent mixture is discussed. The implications for future soil remediation and sorbent regeneration based on the findings in this study are given.

Synthesis and Study of a New Type of Fluorinated Polyether Demulsifier for Heavy Oil Emulsion Demulsification

To solve the problem of heavy oil demulsification difficulties in Liaohe Oilfield, phenolamine resin initiator was synthesized from p-trifluoromethyl phenol, and then FB series fluorinated polyether demulsifiers were synthesized by block polymerization using ethylene oxide (EO) and propylene oxide (PO) as raw materials. The demulsifiers were characterized by infrared spectroscopy, cloud point, hydrophilic-lipophilic balance (HLB) value, and surface tension. The demulsifying and dehydrating properties were tested by demulsifying and dehydrating experiments, the demulsification mechanism was analyzed by the microscopic demulsification process test, and the influence of demulsifier addition and demulsifying temperature on demulsifying performance was also studied. The results showed that under the condition of the optimum demulsification temperature of 60 °C and the optimum demulsifier dosage of 100 mg/L, the water removal (%) of fluorinated polyether demulsifier of FB 4 was the highest, and the overall water removal (%) of 50 mL crude oil emulsion in Liaohe Oilfield reached 90.33% within 2 h, which was better than the current demulsifier used in Liaohe crude oil.

Diffusion of perfluoroalkyl acids through clay-rich soil

Diffusion through a water saturated silty clay soil column was measured for six perfluoroalkyl acids (PFAAs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). An aqueous pore diffusion model, which incorporated linear adsorption parameters measured independently in batch tests and a tortuosity factor determined independently using a bromide tracer test, was used to describe the experimental diffusion data. The diffusion model substantially underpredicted PFAA diffusion through the soil column for the more strongly sorbing PFAAs (most notably PFOS). Instead, application of a diffusion model that included a surface diffusion-like process provided substantially improved prediction of PFAA diffusion through the soil. The ratio of the observed pore diffusion coefficient to the observed surface diffusion coefficient ranged from 13 (for perfluorohexane sulfonate) to 0.88 for PFOS. These results suggest that surface diffusion serves a potentially important role for strongly sorbing PFAAs in clay-rich soils, and highlights the need for additional studies into the coupled adsorption and diffusion of PFAAs in low permeability media.

Structure and Interactions in Perfluorooctanoate Micellar Solutions Revealed by Small-Angle Neutron Scattering and Molecular Dynamics Simulations Studies: Effect of Urea

The self-assembly of surfactants in aqueous solution can be modulated by the presence of additives including urea, which is a well-known protein denaturant and also present in physiological fluids and agricultural runoff. This study addresses the effects of urea on the structure of micelles formed in water by the fluorinated surfactant perfluoro-n-octanoic acid ammonium salt (PFOA). Analysis of small-angle neutron scattering (SANS) experiments and atomistic molecular dynamics (MD) simulations provide consensus strong evidence for the direct mechanism of urea action on micellization: urea helps solvate the hydrophobic micelle core by localizing at the surface of the core in the place of some water molecules. Consequently, urea decreases electrostatic interactions at the micelle shell, changes the micelle shape from prolate ellipsoid to sphere, and decreases the number of surfactant molecules associating in a micelle. These findings inform the interactions and behavior of surface active per- and polyfluoroalkyl substances (PFAS) released in the aqueous environment and biota.

Synthesis of size-controlled and highly monodispersed silica nanoparticles using a short alkyl-chain fluorinated surfactant

Highly monodispersed silica nanoparticles (SiNPs) were synthesised using a fluorinated surfactant, HOCH2CH(CF3)CO2H, and its efficiency was compared with efficiencies of five other surfactants. The size of the SiNPs (∼50-200 nm) was controlled by controlling the surfactant amount. The short alkyl-chain fluoro surfactant was found to be more efficient at producing monodispersed SiNPs than its long alkyl-chain fluoro or non-fluorinated surfactant counterparts.