Automated liquid microjunction surface sampling-HPLC-MS/MS analysis of drugs and metabolites in whole-body thin tissue sections

Combining MALDI mass spectrometry imaging and droplet-base surface sampling analysis for tissue distribution, metabolite profiling, and relative quantification of cyclic peptide melanotan II

Peptides have become a fast-growing segment of the pharmaceutical industry over the past few decades. It is essential to develop cutting edge analytical techniques to support the discovery and development of peptide therapeutics, especially to examine their absorption, distribution, metabolism and excretion (ADME) properties. Herein, we utilized two label-free mass spectrometry (MS) based techniques to investigate representative challenges in developing therapeutic peptides, such as tissue distribution, metabolic stability and clearance. A tool proof-of-concept cyclic peptide, melanotan II, was used in this study. Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI), which is a well-developed label-free imaging technique, was used to map the detailed molecular distribution of melanotan II and its metabolites. Droplet-based liquid microjunction surface sampling liquid chromatography-high resolution mass spectrometry (LMJ-SSP-LC-HRMS) was used in combination with MALDI-MSI to rapidly profile molecular information and provide structural insights on drug and metabolites. Using both techniques in parallel allowed a more comprehensive and complementary data set than using either technique independently. We envision MALDI-MSI and droplet-based LMJ-SSP-LC-HRMS, which can be used in combination or as standalone techniques, to become valuable tools for assessing the in vivo fate of peptide therapeutics in support of drug discovery and development.

Mapping the Fungal Battlefield: Using in situ Chemistry and Deletion Mutants to Monitor Interspecific Chemical Interactions Between Fungi

Fungi grow in competitive environments, and to cope, they have evolved strategies, such as the ability to produce a wide range of secondary metabolites. This begs two related questions. First, how do secondary metabolites influence fungal ecology and interspecific interactions? Second, can these interspecific interactions provide a way to “see” how fungi respond, chemically, within a competitive environment? To evaluate these, and to gain insight into the secondary metabolic arsenal fungi possess, we co-cultured Aspergillus fischeri, a genetically tractable fungus that produces a suite of mycotoxins, with Xylaria cubensis, a fungus that produces the fungistatic compound and FDA-approved drug, griseofulvin. To monitor and characterize fungal chemistry in situ, we used the droplet-liquid microjunction-surface sampling probe (droplet probe). The droplet probe makes a microextraction at defined locations on the surface of the co-culture, followed by analysis of the secondary metabolite profile via liquid chromatography-mass spectrometry. Using this, we mapped and compared the spatial profiles of secondary metabolites from both fungi in monoculture versus co-culture. X. cubensis predominantly biosynthesized griseofulvin and dechlorogriseofulvin in monoculture. In contrast, under co-culture conditions a deadlock was formed between the two fungi, and X. cubensis biosynthesized the same two secondary metabolites, along with dechloro-5′-hydroxygriseofulvin and 5′-hydroxygriseofulvin, all of which have fungistatic properties, as well as mycotoxins like cytochalasin D and cytochalasin C. In contrast, in co-culture, A. fischeri increased the production of the mycotoxins fumitremorgin B and verruculogen, but otherwise remained unchanged relative to its monoculture. To evaluate that secondary metabolites play an important role in defense and territory establishment, we co-cultured A. fischeri lacking the master regulator of secondary metabolism laeA with X. cubensis. We found that the reduced secondary metabolite biosynthesis of the ΔlaeA strain of A. fischeri eliminated the organism’s ability to compete in co-culture and led to its displacement by X. cubensis. These results demonstrate the potential of in situ chemical analysis and deletion mutant approaches for shedding light on the ecological roles of secondary metabolites and how they influence fungal ecological strategies; co-culturing may also stimulate the biosynthesis of secondary metabolites that are not produced in monoculture in the laboratory.

Non-Destructive Chemical Analysis of a Garcinia mangostana L. (Mangosteen) Herbarium Voucher Specimen

Herbarium voucher specimens are used primarily for taxonomic confirmation. However, they also afford a record of the metabolic profile of a plant, potentially at the time it was collected, or at the very least, at the time of analysis. Even with the enhanced sensitivity of modern analytical techniques, analysis of the metabolites of a herbarium voucher requires removal and consumption of at least part of an entire specimen. We present herein a non-destructive method to analyze the metabolites of herbarium voucher specimens with the droplet-liquid microjunction-surface sampling probe (droplet probe) coupled to ultra-performance liquid chromatography and highresolution mass spectrometry. As proof of concept, a herbarium voucher specimen of Garcinia mangostana (mangosteen) was utilized due to the well-characterized xanthones biosynthesized by this plant, which are of interest as potential anticancer agents. Also, the juice of the fruits of this plant is used widely in the United States and in other countries as a botanical dietary supplement. Metabolite profiles of the sampled surfaces were compared to a subset of xanthone standards. Using this innovative method on the herbarium voucher specimen, we were able to readily identify cytotoxic prenylated xanthones while maintaining the integrity of the entire specimen.

Rapid In Situ Profiling of Lipid C═C Location Isomers in Tissue Using Ambient Mass Spectrometry with Photochemical Reactions

Rapid and in situ profiling of lipids using ambient mass spectrometry (AMS) techniques has great potential for clinical diagnosis, biological studies, and biomarker discovery. In this study, the online photochemical reaction involving carbon-carbon double bonds was coupled with a surface sampling technique to develop a direct tissue-analysis method with specificity to lipid C═C isomers. This method enabled the in situ analysis of lipids from the surface of various tissues or tissue sections, which allowed the structural characterization of lipid isomers within 2 min. Under optimized reaction conditions, we have established a method for the relative quantitation of lipid C═C location isomers by comparing the abundances of the diagnostic ions arising from each isomer, which has been proven effective through the established linear relationship ( R² = 0.999) between molar ratio and diagnostic ion ratio of the FA 18:1 C═C location isomers. This method was then used for the rapid profiling of unsaturated lipid C═C isomers in the sections of rat brain, lung, liver, spleen, and kidney, as well as in normal and diseased rat tissues. Quantitative information on FA 18:1 and PC 16:0-18:1 C═C isomers was obtained, and significant differences were observed between different samples. To the best of our knowledge, this is the first study to report the direct analysis of lipid C═C isomers in tissues using AMS. Our results demonstrated that this method can serve as a rapid analytical approach for the profiling of unsaturated lipid C═C isomers in biological tissues and should contribute to functional lipidomics and clinical diagnosis.

Spatially-Resolved Top-down Proteomics Bridged to MALDI MS Imaging Reveals the Molecular Physiome of Brain Regions

Tissue spatially-resolved proteomics was performed on 3 brain regions, leading to the characterization of 123 reference proteins. Moreover, 8 alternative proteins from alternative open reading frames (AltORF) were identified. Some proteins display specific post-translational modification profiles or truncation linked to the brain regions and their functions. Systems biology analysis performed on the proteome identified in each region allowed to associate sub-networks with the functional physiology of each brain region. Back correlation of the proteins identified by spatially-resolved proteomics at a given tissue localization with the MALDI MS imaging data, was then performed. As an example, mapping of the distribution of the matrix metallopeptidase 3-cleaved C-terminal fragment of α-synuclein (aa 95–140) identified its specific distribution along the hippocampal dentate gyrus. Taken together, we established the molecular physiome of 3 rat brain regions through reference and hidden proteome characterization.

In situ mass spectrometry monitoring of fungal cultures led to the identification of four peptaibols with a rare threonine residue

Peptaibols are an intriguing class of fungal metabolites due both to their wide range of reported bioactivities and to the structural variability that can be generated by the exchange of variable amino acid building blocks. In an effort to streamline the discovery of structurally diverse peptaibols, a mass spectrometry surface sampling technique was applied to screen the chemistry of fungal cultures in situ. Four previously undescribed peptaibols, all containing a rare threonine residue, were identified from a fungal culture (MSX53554), which was identified as Nectriopsis Maire (Bionectriaceae, Hypocreales, Ascomycota). These compounds not only increased the known threonine-containing peptaibols by nearly 20%, but also, the threonine residue was situated in a unique place compared to the other reported threonine-containing peptaibols. After the initial in situ detection and characterization, a large-scale solid fermentation culture was grown. The four peptaibols were isolated and characterized by mass spectrometry. In addition, one of the peptaibols was fully characterized by NMR and amino acid analysis using Marfey's reagent and exhibited moderate in vitro anticancer activity.

Extraction efficiency and implications for absolute quantitation of propranolol in mouse brain, liver and kidney tissue sections using droplet-based liquid microjunction surface sampling high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

RATIONALE

Currently, the absolute quantitation aspects of droplet-based surface sampling for tissue analysis using a fully automated autosampler/high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS) system have not been fully evaluated. Knowledge of extraction efficiency and its reproducibility is required to judge the potential of the method for absolute quantitation of analytes from tissue sections.

METHODS

Adjacent tissue sections of propranolol-dosed mouse brain (10-μm-thick), kidney (10-μm-thick) and liver (8-, 10-, 16- and 24-μm-thick) were obtained. The absolute concentration of propranolol was determined in tissue punches from serial sections using standard bulk tissue extraction protocols and subsequent HPLC separations and MS/MS analysis. These values were used to determine propranolol extraction efficiency from the tissues with the droplet-based surface sampling approach.

RESULTS

Extraction efficiency of propranolol using 10-μm-thick brain, kidney and liver tissues using droplet-based surface sampling varied between ~45 and 63%. The extraction efficiency decreased from ~65% to ~36% with liver thickness increasing from 8 μm to 24 μm. Selecting half of the samples as standards, the precision and accuracy of propranolol concentrations were determined for the other half of the samples that were employed as a quality control data set. The resulting precision (±15%) and accuracy (±3%) were within acceptable limits.

CONCLUSIONS

Quantitation of adjacent mouse tissue sections of different organs and of various thicknesses by droplet-based surface sampling in comparison with bulk extraction of tissue punches showed that extraction efficiency was incomplete using the former method, and that it depended on the organ and tissue thickness. However, once extraction efficiency was determined and applied, the droplet-based approach provided satisfactory quantitation accuracy and precision for assay validations. Thus, once the extraction efficiency was calibrated for a given tissue type, tissue thickness and drug, the droplet-based approach provides a non-labour-intensive and high-throughput means to acquire spatially resolved quantitative analysis of multiple samples of the same type. Published in 2016. This article is a U.S. Government work and is in the public domain in the USA.

Optimizing production and evaluating biosynthesis in situ of a herbicidal compound, mevalocidin, from Coniolariella sp

Mevalocidin is a fungal secondary metabolite produced by Coniolariella sp. It is a unique phytotoxin that demonstrates broad spectrum post-emergent herbicidal properties. With limited options for weed control, the commercialization of a natural product pesticide would be beneficial to organic farming. In this study, two mevalocidin-producing fungal strains, coded MSX56446 and MSX92917, were explored under a variety of growth conditions, including time, temperature, and media. The concentration of mevalocidin was quantitatively measured via LC-MS to determine the optimal setting for each condition. Maximum production was achieved for each condition at 20 days, at 30 °C, with YESD + agar, and with a media containing 2.5 % dextrose. Furthermore, an advanced surface sampling technique was incorporated to gain a better understanding of the fungal culture's natural ability to biosynthesize and distribute this herbicide into its environment. It was shown that both fungi actively exude mevalocidin into their environment via liquid droplet formations known as guttates.

Online, Absolute Quantitation of Propranolol from Spatially Distinct 20- and 40-μm Dissections of Brain, Liver, and Kidney Thin Tissue Sections by Laser Microdissection-Liquid Vortex Capture-Mass Spectrometry

Spatial resolved quantitation of chemical species in thin tissue sections by mass spectrometric methods has been constrained by the need for matrix-matched standards or other arduous calibration protocols and procedures to mitigate matrix effects (e.g., spatially varying ionization suppression). Reported here is the use of laser "cut and drop" sampling with a laser microdissection-liquid vortex capture electrospray ionization tandem mass spectrometry (LMD-LVC/ESI-MS/MS) system for online and absolute quantitation of propranolol in mouse brain, kidney, and liver thin tissue sections of mice administered with the drug at a 7.5 mg/kg dose, intravenously. In this procedure either 20 μm × 20 μm or 40 μm × 40 μm tissue microdissections were cut and dropped into the flowing solvent of the capture probe. During transport to the ESI source drug related material was completely extracted from the tissue into the solvent, which contained a known concentration of propranolol-d7 as an internal standard. This allowed absolute quantitation to be achieved with an external calibration curve generated from standards containing the same fixed concentration of propranolol-d7 and varied concentrations of propranolol. Average propranolol concentrations determined with the laser "cut and drop" sampling method closely agreed with concentration values obtained from 2.3 mm diameter tissue punches from serial sections that were extracted and quantified by HPLC/ESI-MS/MS measurements. In addition, the relative abundance of hydroxypropranolol glucuronide metabolites were recorded and found to be consistent with previous findings.

Spatial and Temporal Profiling of Griseofulvin Production in Xylaria cubensis Using Mass Spectrometry Mapping

A large portion of natural products research revolves around the discovery of new, bioactive chemical entities; however, studies to probe the biological purpose of such secondary metabolites for the host organism are often limited. Mass spectrometry mapping of secondary metabolite biosynthesis in situ can be used to probe a series of ecological questions about fungi that may be lost through traditional natural products chemistry extraction protocols. A griseofulvin-producing fungal culture of the Xylariaceae family, isolated as an endophyte of the tree Asimina triloba, was analyzed through a series of spatial and temporal mapping experiments. This fungus produced unique fungal characteristics, such as guttates and stroma, both of which were explored spatially. The distribution of griseofulvin on this culture in isolation was compared to its dispersal when grown in co-culture with a competing Penicillium species via a droplet–based surface sampling system. The fungistatic properties of griseofulvin were visualized, including the consequences for biosynthesis of polyhydroxyanthraquinones in a rival culture.

Analysis of small molecule antibody-drug conjugate catabolites in rat liver and tumor tissue by liquid extraction surface analysis micro-capillary liquid chromatography/tandem mass spectrometry

RATIONALE

Antibody-drug conjugates (ADCs) are some of the most promising antibody-related therapeutics. The fate of the cytotoxic moiety of ADCs in vivo after proteolytic degradation of the antibody needs to be well understood in order to mitigate toxicity risks and design proper first in patient studies.

METHODS

The feasibility of liquid extraction surface analysis micro-capillary liquid chromatography/tandem mass spectrometry (LESA-μLC/MS/MS) was tested for direct surface sampling of two possible ADC catabolites composed of synthetically modified maytansinoid (DM1) and 4-[N-maleimidomethyl]cyclohexane-1-carbonyl (MCC) from rat liver and tumor tissue. Moreover, the iMatrixSpray was incorporated to prepare calibration standards (Cs) and quality control (QC) samples by spraying analyte solution at different concentrations directly on blank tissue.

RESULTS

Lys-MCC-DM1 sprayed on blank liver tissue was homogeneously distributed (12.3% variability). The assay was selective (inference ≤20%) and linear from 50.0 to 1000 ng/mL without any carry-over. Inter-run accuracy and precision were ≤2.3% and ≤25.9% meeting acceptance. Lys-MCC-DM1 was the only catabolite detected in liver and tumor tissue and was most likely responsible for the total radioactivity signal in liver tissue 72 h post-dose measured by quantitative whole body autoradiography (QWBA).

CONCLUSIONS

Both analytical assays (LESA-μLC/MS/MS and QWBA) are complementary to each other and provide useful quantitative and qualitative information in spatial tissue distribution of ADCs and their related catabolites. Copyright © 2016 John Wiley & Sons, Ltd.

Quantitation of repaglinide and metabolites in mouse whole-body thin tissue sections using droplet-based liquid microjunction surface sampling-high-performance liquid chromatography-electrospray ionization tandem mass spectrometry

Herein, quantitation aspects of a fully automated autosampler/HPLC-MS/MS system applied for unattended droplet-based surface sampling of repaglinide dosed thin tissue sections with subsequent HPLC separation and mass spectrometric analysis of parent drug and various drug metabolites were studied. Major organs (brain, lung, liver, kidney and muscle) from whole-body thin tissue sections and corresponding organ homogenates prepared from repaglinide dosed mice were sampled by surface sampling and by bulk extraction, respectively, and analyzed by HPLC-MS/MS. A semi-quantitative agreement between data obtained by surface sampling and that by employing organ homogenate extraction was observed. Drug concentrations obtained by the two methods followed the same patterns for post-dose time points (0.25, 0.5, 1 and 2 h). Drug amounts determined in the specific tissues was typically higher when analyzing extracts from the organ homogenates. In addition, relative comparison of the levels of individual metabolites between the two analytical methods also revealed good semi-quantitative agreement.

An open port sampling interface for liquid introduction atmospheric pressure ionization mass spectrometry

RATIONALE

A simple method to introduce unprocessed samples into a solvent for rapid characterization by liquid introduction atmospheric pressure ionization mass spectrometry has been lacking. The continuous flow, self-cleaning open port sampling interface introduced here fills this void.

METHODS

The open port sampling interface used a vertically aligned, co-axial tube arrangement enabling solvent delivery to the sampling end of the device through the tubing annulus and solvent aspiration down the center tube and into the ionization source of the mass spectrometer via the commercial APCI emitter probe. The solvent delivery rate to the interface was set to exceed the aspiration rate, creating a continuous sampling interface along with a constant, self-cleaning spillover of solvent from the top of the probe.

RESULTS

Using the open port sampling interface with positive ion mode APCI and a hybrid quadrupole time-of-flight mass spectrometer, rapid, direct sampling and analysis possibilities are exemplified with plastics, ballpoint and felt tip ink pens, skin, and vegetable oils. These results demonstrated that the open port sampling interface could be used as a simple, versatile and self-cleaning system to rapidly introduce multiple types of unprocessed, sometimes highly concentrated and complex, samples into a solvent flow stream for subsequent ionization and analysis by mass spectrometry. The basic setup presented here could be incorporated with any self-aspirating liquid introduction ionization source (e.g., ESI, APCI, APPI, ICP, etc.) or any type of atmospheric pressure sampling-ready mass spectrometer system.

CONCLUSIONS

The open port sampling interface provides a means to introduce and quickly analyze unprocessed solid or liquid samples with the liquid introduction atmospheric pressure ionization source without fear of sampling interface or ionization source contamination.

Dereplicating and Spatial Mapping of Secondary Metabolites from Fungal Cultures in Situ

Ambient ionization mass spectrometry techniques have recently become prevalent in natural product research due to their ability to examine secondary metabolites in situ. These techniques retain invaluable spatial and temporal details that are lost through traditional extraction processes. However, most ambient ionization techniques do not collect mutually supportive data, such as chromatographic retention times and/or UV/vis spectra, and this can limit the ability to identify certain metabolites, such as differentiating isomers. To overcome this, the droplet-liquid microjunction-surface sampling probe (droplet-LMJ-SSP) was coupled with UPLC-PDA-HRMS-MS/MS, thus providing separation, retention times, MS data, and UV/vis data used in traditional dereplication protocols. By capturing these mutually supportive data, the identity of secondary metabolites can be confidently and rapidly assigned in situ. Using the droplet-LMJ-SSP, a protocol was constructed to analyze the secondary metabolite profile of fungal cultures without any sample preparation. The results demonstrate that fungal cultures can be dereplicated from the Petri dish, thus identifying secondary metabolites, including isomers, and confirming them against reference standards. Furthermore, heat maps, similar to mass spectrometry imaging, can be used to ascertain the location and relative concentration of secondary metabolites directly on the surface and/or surroundings of a fungal culture.

Profiling of adrenocorticotropic hormone and arginine vasopressin in human pituitary gland and tumor thin tissue sections using droplet-based liquid-microjunction surface-sampling-HPLC-ESI-MS-MS

Described here are the results from the profiling of the proteins arginine vasopressin (AVP) and adrenocorticotropic hormone (ACTH) from normal human pituitary gland and pituitary adenoma tissue sections, using a fully automated droplet-based liquid-microjunction surface-sampling-HPLC-ESI-MS-MS system for spatially resolved sampling, HPLC separation, and mass spectrometric detection. Excellent correlation was found between the protein distribution data obtained with this method and data obtained with matrix-assisted laser desorption/ionization (MALDI) chemical imaging analyses of serial sections of the same tissue. The protein distributions correlated with the visible anatomic pattern of the pituitary gland. AVP was most abundant in the posterior pituitary gland region (neurohypophysis), and ATCH was dominant in the anterior pituitary gland region (adenohypophysis). The relative amounts of AVP and ACTH sampled from a series of ACTH-secreting and non-secreting pituitary adenomas correlated with histopathological evaluation. ACTH was readily detected at significantly higher levels in regions of ACTH-secreting adenomas and in normal anterior adenohypophysis compared with non-secreting adenoma and neurohypophysis. AVP was mostly detected in normal neurohypophysis, as expected. This work reveals that a fully automated droplet-based liquid-microjunction surface-sampling system coupled to HPLC-ESI-MS-MS can be readily used for spatially resolved sampling, separation, detection, and semi-quantitation of physiologically-relevant peptide and protein hormones, including AVP and ACTH, directly from human tissue. In addition, the relative simplicity, rapidity, and specificity of this method support the potential of this basic technology, with further advancement, for assisting surgical decision-making. Graphical Abstract Mass spectrometry based profiling of hormones in human pituitary gland and tumor thin tissue sections.

Highlights from the 2014 Applied Pharmaceutical Analysis Conference

The 10th annual Applied Pharmaceutical Analysis (APA) conference was held from 8th to 10th September in Cambridge, MA, USA. This year's APA conference focused on three different ‘workshops’ over the 3 days: Regulated Bioanalysis, Biotransformation, and Discovery. There was a great amount of information discussed by a variety of experts over the 3 days. This included, among other things; speakers from the US FDA discussing statute changes and guidelines, leaders from academic laboratories discussing innovation in bioanalytical tools, and industry scientists discussing current trends in the industry. The conference afforded attendees the opportunity to learn from the speakers during their sessions. In addition, there was ample opportunity for attendees and speakers both to learn from each other through informal interactions.

Liquid Extraction Surface Analysis Mass Spectrometry (LESA MS): Combining Liquid Extraction, Surface Profiling and Ambient Ionization Mass Spectrometry in One Novel Analysis Technique

In this chapter we give an overview of liquid extraction surface analysis mass spectrometry (LESA-MS), a novel analysis technique that combines liquid extraction from a surface of interest and ambient nanoelectrospray ionization combined with mass spectrometry to analyze compounds of interest. LESA MS was first described by van Berkel and Kertesz in 2009 and subsequently made commercially available by Advion Inc. by way of its TriVersa-NanoMate™ robotic nanoelectrospray ionization source. LESA was initially intended as a complementary analysis technique to MALDI imaging in pharmaceutical drug distribution and development; however, soon after the commercial availability of this technique, a broader use became apparent with applications ranging from biofilms on contact lenses, antibiotics expressed by bacteria cultured in agar, dried blood spot analysis, surface properties of aged plastics and aerosols from compactor material – to mention only a few. In this chapter, we will discuss selected applications and provide an outlook of LESA developments as they currently unfold, knowing full well that such a new technology will develop unexpectedly and in application areas not previously envisioned.

An enhanced droplet-based liquid microjunction surface sampling system coupled with HPLC-ESI-MS/MS for spatially resolved analysis

Droplet-based liquid microjunction surface sampling coupled with high-performance liquid chromatography (HPLC)-electrospray ionization (ESI)-tandem mass spectrometry (MS/MS) for spatially resolved analysis provides the possibility of effective analysis of complex matrix samples and can provide a greater degree of chemical information from a single spot sample than is typically possible with a direct analysis of an extract. Described here is the setup and enhanced capabilities of a discrete droplet liquid microjunction surface sampling system employing a commercially available CTC PAL autosampler. The system enhancements include incorporation of a laser distance sensor enabling unattended analysis of samples and sample locations of dramatically disparate height as well as reliably dispensing just 0.5 μL of extraction solvent to make the liquid junction to the surface, wherein the extraction spot size was confined to an area about 0.7 mm in diameter; software modifications improving the spatial resolution of sampling spot selection from 1.0 to 0.1 mm; use of an open bed tray system to accommodate samples as large as whole-body rat thin tissue sections; and custom sample/solvent holders that shorten sampling time to approximately 1 min per sample. The merit of these new features was demonstrated by spatially resolved sampling, HPLC separation, and mass spectral detection of pharmaceuticals and metabolites from whole-body rat thin tissue sections and razor blade ("crude") cut mouse tissue.

Liquid microjunction surface sampling of acetaminophen, terfenadine and their metabolites in thin tissue sections

Background: The aim of this work was to evaluate the analytical performance of a fully automated droplet-based surface-sampling system for determining the distribution of the drugs acetaminophen and terfenadine, and their metabolites, in rat thin tissue sections. Results: The rank order of acetaminophen concentration observed in tissues was stomach > small intestine > liver, while the concentrations of its glucuronide and sulfate metabolites were greatest in the liver and small intestine. Terfenadine was most concentrated in the liver and kidney, while its major metabolite, fexofenadine, was found in the liver and small intestine. Conclusion: The spatial distributions of both drugs and their respective metabolites observed in this work were consistent with previous studies using radiolabeled drugs.

Sampling reliability, spatial resolution, spatial precision, and extraction efficiency in droplet-based liquid microjunction surface sampling

RATIONALE

Droplet-based liquid extraction approaches for spatially resolved surface sampling coupled with high-performance liquid chromatography/mass spectrometry (HPLC/MS) provide the ability to deal with complex sample matrices and to identify isomeric compounds not distinguishable by MS methods alone. Improvements in sampling reliability, spatial resolution, spatial precision and extraction efficiency are required to further the analytical utility of such sampling systems.

METHODS

An autosampler capable of droplet-based liquid extraction was coupled with an HPLC/MS system. Visual inspection of the junction formation between the probe and a glass surface allowed evaluation of the liquid junction formation reliability, spatial location and size as a function of variable parameters such as solvent composition, probe-to-surface distance and droplet volume during solvent dispense and aspiration. Quantitative analysis of a component from a model surface using a weak extraction solvent was used to evaluate the effect of extraction time and number of extraction cycles on analyte extraction efficiency.

RESULTS

Reliable junction formation, independent of other variable parameters, was realized simply by maintaining a maximum distance of 0.4 mm between the probe and the sample surface. The smallest liquid junction diameter (1.6 mm) was observed when using a 1 μL dispensed volume and 90% aqueous extraction solvent with either methanol or acetonitrile. Good sampling precision was always achieved using an extraction solvent with at least 50% methanol or acetonitrile by volume. Quantitative sampling of rhodamine B from a magenta Sharpie ink surface using a weak extraction solvent showed that extraction efficiency could be improved by increasing the extraction time or the number of extraction cycles.

CONCLUSIONS

A platform employing a commercially available autosampler coupled to HPLC/MS was developed and successfully applied to investigate the effect of different sampling parameters on the reliability, spatial resolution, spatial precision and extraction efficiency of the liquid junction surface sampling process. This article is a U.S. Government work and is in the public domain in the USA.

An industry perspective on tiered approach to the investigation of metabolites in drug development

Background: A tiered approach to drug metabolite measurement and identification is often used industry wide to fulfill regulatory requirements specified in recent US FDA and European Medicines Agency guidance. Although this strategy is structured in its intent it can be customized to address unique challenges which may arise during early and late drug development activities. These unconventional methods can be applied at any stage to facilitate metabolite characterization. Results: Two case studies are described NVS 1 and 2. NVS 1: plasma concentrations, measured using a radiolabeled MS-response factor exploratory method, were comparable to those from a validated bioanalytical method. The NVS 2 example showed how in vitro analysis helped to characterize an unexpectedly abundant circulating plasma metabolite M3. Conclusion: A tiered approach incorporating many aspects of conventional and flexible analytical methodologies can be pulled together to address regulatory questions surrounding drug metabolite characterization.