Current situation and future prospects for beef production in Europe - A review

Relationships between European carcass evaluation and Meat Standards Australia grading scheme applied to young beef cattle

The European carcass grading scheme (EUROP) places large emphasis on meat yield and therefore on quantitative traits such as carcass conformation and superficial fat coverage. However, it falls short in considering sensory properties and consumer satisfaction. In contrast, the Meat Standards Australia (MSA) grading scheme considers, among others, animals' ossification, marbling, and ultimate pH as primary indicators of beef eating quality. This study aims to characterize MSA carcass grading scheme applied to the Italian beef production system, considering its significant role in European beef market. The study involved 3204 Charolais, Limousin, and crossbred young bulls and heifers slaughtered in a commercial Italian abattoir. Data collection spanned a broad range of variables, including animal characteristics, MSA traits, and EUROP carcass grading traits. Regardless of the sex of the animal, no significant relationship was observed between MSA traits and EUROP carcass grading scores. Factors such as sex, age, and arrival season at the fattening unit significantly affected most of MSA traits. Females had significantly higher marbling score, and lower ossification score and hump height than males. Animals imported in autumn and winter had significantly lower marbling score, but similar ossification score compared to those imported in spring and summer. Older females had the highest marbling scores. While further research is needed to assess whether the MSA grading scheme can be adapted to all different European rearing systems, results of this study are a prelude to the potential benefits that the MSA grading scheme can bring to the European beef industry.

Effect of VP, MAP and combined packaging systems on the physicochemical properties and microbiological status of veal from unweaned calves

The packaging system is one of the factors influencing the preservation of the nutritional value, microbiological safety, and sensory attributes of meat. The study investigated changes in physicochemical and microbiological properties taking place during 15-day refrigerated storage of two calf muscles, the longissimus lumborum (LL) and semitendinosus (ST), packaged in three systems, respectively, vacuum packing (VP), modified atmosphere packaging (MAP, 80% O2 + 20% CO2), and a combined system (VP + MAP, 8 d in VP followed by 7 d in MAP). LL and ST stored in VP had significantly lower levels of lipid oxidation, higher α-tocopherol content, and higher instrumentally measured tenderness in comparison with the samples stored in MAP. On the other hand, the MAP samples had lower purge loss at 5 and 15 days, a higher proportion of oxymyoglobin up to 10 days of storage, and a better microbiological status. Calf muscle samples stored in the VP + MAP system had intermediate values for TBARS and α-tocopherol content and at the same time were the most tender and had the lowest counts of Pseudomonas and Enterobacteriaceae bacteria at 15 days. All packaging systems ensured relatively good quality of veal characteristics up to the last day of storage. However, for MAP at 15 days of storage, unfavourable changes in colour (a high level of metmyoglobin and a decrease in oxymyoglobin, redness and R630/580 ratio) and in the lipid fraction (a high TBARS value and a significant decrease in α-tocopherol content) were observed.

Modelling Alternative Economic Incentive Schemes for Semi-Natural Grassland Conservation in Estonia

Semi-natural grasslands (SNGLs) in Estonia are threatened by abandonment. This threat is leading to concerns about the degradation of biodiversity within grassland communities. Despite the high relevance of economic incentives in this context, how such incentives influence land managers' decision-making regarding the agricultural use of SNGLs has not been investigated. To obtain its socio-ecological implications for policy-making, we developed regionally specific agricultural scenarios (compensation payments, livestock capacity, hey export, and bioenergy production) and an interdisciplinary modelling approach that made it possible to simulate agricultural land use changes through land managers' responses to varied economic conditions. Through this approach, we found that some economic factors hampered the use of SNGLs: the moderate profitability of beef production, labour shortages, and the relatively high profitability of mulching. We observed a positive relationship between SNGLs and habitat suitability for breeding and feeding birds. However, due to the high maintenance costs of SNGLs, the modelling results indicated that increasing the use of SNGLs through public budgets caused crowding-out effects, i.e., the deteriorating market integration of regional agriculture. This study emphasises the need for policy measures aimed at cost-effective, labour-efficient management practices for SNGLs.

Exploring the effects of ageing on instrumental and sensory characteristics of meat from Lidia breed females: A comparative study of two commercial types

The aim of this study was to assess the influence of ageing on instrumental and sensory qualities in Longissimus thoracis et lumborum (LTL) from heifers (n = 200) and cows (n = 100) of Lidia breed. The animals were slaughtered as heifers (24-48 months) or cull cows (> 48 months). For instrumental analysis, pars Thoracis aged at 7, 14 and 28 days was used; for sensory analysis, pars Lumborum aged at 14 and 28 days was evaluated. Heifers showed redder and yellower meat (P < 0.05) and cows showed slightly higher Water Holding Capacity (WHC): Thawing Loss (TL) = P < 0.05; Drip Loss (DL) = P < 0.01; Pressure Loss (PL) = P < 0.01; Cooking Loss (CL) = P < 0.05. Ageing generated changes in meat colour, with increases in lightness (L*, linear pattern, P < 0.001) and oscillations in a* and b* (quadratic patterns; P < 0.05 and P < 0.001, respectively). Ageing affected TL (increasing, P < 0.001) and PL (decreasing, P < 0.05), and generated a significant improvement in Warner Bratzler Shear Force (WBSF) values (P < 0.001). Commercial type revealed changes in consumer panel ratings for flavour (P < 0.05), juiciness (P < 0.01), tenderness (P < 0.001) and overall acceptability (P < 0.001), with better results in these parameters for cull cows. In contrast to the usual, ageing did not affect the sensory traits. There was no significant interaction between commercial type and ageing time, except for beef flavour, which worsened with ageing (P < 0.05).

The Meat Standards Australia carcass grading site affects assessment of marbling and prediction of meat-eating quality in growing European beef cattle

The lack of consumer feedback on beef eating quality contributes to reduced beef consumption in Europe. The Meat Standards Australia (MSA) grading scheme can assess the palatability of beef carcasses usually graded at the 10th thoracic vertebrae. However, the European beef industry relies on late-maturing breeds usually cut at the 5th vertebrae due to commercial reasons. Data from 55 young bulls and heifers of late-maturing breeds were collected in an Italian slaughterhouse following the MSA guidelines at both carcass grading sites and sides. Intramuscular fat levels were assessed through two scores and used with other variables to feed the MSA model, which predicts the MSA index, the meat-eating quality scores (MQ4) for 5 muscles and for each carcass grading site × side combination. The scores were analyzed using a mixed linear model. A correlation analysis was conducted to predict the variables measured at the 10th site using their correspondent at the 5th carcass grading site. A stepwise regression was conducted to understand the weight of each measured variable on marbling and MQ4 scores measured both at 5th and 10th carcass grading sites. Results showed significantly higher value for the studied traits at the 5th carcass grading site, while carcass side had no significant impact. The equations had high predictive capability and MSA marbling score played a key role in explaining the variability across carcass grading sites. The differences in marbling and MQ4 scores between the carcass grading sites suggest considering this factor if the MSA grading system will be applied to Europe.

Nutrient intake, productive and metabolic parameters of Nellore bulls feed a forage free diet using cottonseed cake as a fiber source

We hypothesized that cottonseed cake in confined Nellore young bulls' diet as fiber source, could maintain or improve the nutrient intake, and productive and metabolic parameters. It was evaluated the total replacement of whole plant corn silage (WPCS) by cottonseed cake (CSC) as a source of fiber in the diet. A completely randomized design with two treatments and 12 replications was used. The treatments were two experimental diets containing 300 g/kg of WPCS or CSC as roughage. All animals at 0, 15, 30, 60 and 112 days were weighed to monitor productive performance and nutrient intake. Dry matter intakes, organic matter, neutral detergent fiber, physically effective neutral detergent fiber, crude protein and non-fiber carbohydrates of the WPCS treatment cattle were higher (p < 0.05), and the ethereal extract intake of cattle fed CSC diet was higher. The BW of cattle fed WPCS was higher in the two initial periods of confinement (p < 0.05). Animals from both treatments showed linear growth during the confinement period. There was a fiber source × period interaction for total weight gain (TWG), average daily gain (ADG) and feed efficiency (FE) (p < 0.05), with the lowest in the first 15 days and the highest at 30 days, reflecting a compensatory gain in animals fed with CSC. Bulls fed with CSC showed negative TWG and ADG in the first period (p < 0.05), but recovered in the following periods, surpassing that of the SC treatment in the last two periods. There was negative EF of bulls fed with CSC in the first period (P < 0.05), but in the following periods the CSC diet did not differ from the WPCS diet. The animals fed CSC diet showed a higher concentration of cholesterol and glucose in the blood plasma (p < 0.05). The forage-free diet containing cottonseed cake as a source of fiber replacing corn silage promoted better animal performance.

Distribution characteristics and potential risks of bioaerosols during scattered farming

In most economically underdeveloped areas, scattered farming and human‒livestock cohabitation are common. However, production of bioaerosols and their potential harm in these areas have not been previously researched. In this study, bioaerosol characteristics were analyzed in scattered farming areas in rural Northwest China. The highest bacteria, fungi, and Enterobacteria concentrations were 125609 ± 467 CFU/m³, 25175 ± 10305 CFU/m³, and 4167 ± 592 CFU/m³, respectively. Most bioaerosols had particle sizes >3.3 μm. A total of 71 bacterial genera and 16 fungal genera of potential pathogens were identified, including zoonotic potential pathogenic genera. Moreover, our findings showed that the scattered farming pattern of human‒animal cohabitation can affect the indoor air environment in the surrounding area, leading to chronic respiratory diseases in the occupants. Therefore, relevant government departments and farmers should enhance their awareness of bioaerosol risks and consider measures that may be taken to reduce them.

Environmental Impacts of High-Quality Brazilian Beef Production: A Comparative Life Cycle Assessment of Premium and Super-Premium Beef

When individual purchasing power increases in society, there is a trend toward a quantitative and qualitative increase in the consumption of products. Considering the magnitude of beef production in Brazil, environmental impacts are important factors for the domestic and international markets. This study assessed a Brazilian feedlot system characterized by high animal welfare standards that produces high-quality beef that is more marbled than that produced in grass-fed systems. We assessed the environmental impacts and compared premium and super-premium beef produced in a feedlot system using a partial Life Cycle Assessment (LCA). Data were collected directly on the property analyzed, considering environmental inputs and outputs and economic factors associated with the production stages of each line (premium versus super-premium). The results show that high-quality beef has, beyond a greater financial cost, an environmental cost, with the super-premium line producing a 286% higher carbon footprint, 297% more eutrophication, and three times higher acidification potential and land use than the premium line. The results of the environmental impacts agree with the results of production costs, reflecting a 282.82% higher production cost in super-premium than in premium animals. Footprints of 5.0323 kg, 4.7746 kg, and 8.8858 kg CO2 eq./kg live weight gain at the feedlot were found in the three lines.

Transportation of Cattle and Pigs between EU Member States 2014-2018 - Can Data from TRACES be used to Create Overview and Inform about Potential Welfare Consequences?

Animal transport is debated due to welfare concerns. In this paper, data from 2014-2018 on animal transportation between EU member states (MS) (for slaughter, breeding, and production), are evaluated to create basis for discussion of TRACES database as tool to inform about pig and cattle welfare. Approximately 33million pigs were transported between EU MS peryear with considerable changes within categories.The majority of pigs was transported for production (57 to 73%), transportation for slaughter constituted 29% (34 to 25%), and the remaining (2-9%) were transported for breeding. Approximately 4 million cattle was transported peryear. The majority was transported for production (62 to 71%), 15-16% for slaughter, and the rest for breeding (23 to 14%). For each species and purpose category, 10 MS transporting the highest numbers are presented, suggesting acomplex underlying pattern with potential animal welfare consequences. Based on adiscussion of selected examples, however, we suggest that usefulness of TRACES as basis of an informed animal welfare evaluation would improve by including data from relevant animal types in addition to purpose categories.

Characterization of Three Different Mediterranean Beef Fattening Systems: Performance, Behavior, and Carcass and Meat Quality

Simple Summary

Beef fattening systems present a large diversity according to the effect of the type (genetics and gender) of animals fattened, the nutrition programs, the housing conditions, and days on feed, resulting in different carcass traits and meat qualities. New beef fattening systems are arising in Mediterranean countries raising crossbred Angus bulls seeking new marketing opportunities. One of the strengths of the present study is that all animals of the three compared different production systems, two conventional (crossbred heifers, Holstein bulls) and one innovative (crossbred Angus bulls), were raised following their own commercial program (days on feed, nutrition) under the same housing, care, and weather conditions. Furthermore, the carcass and meat quality parameters were analyzed by using a common methodology. With this experimental design, potential factors like the housing conditions or the methodology used to analyze carcass and meat quality (aging time, cooling temperatures, lab equipment) did not interfere in data interpretation. The results indicated that fattening crossbred Angus bulls is suitable in an intensive fattening program but technical data (performance, meat quality or consumer preferences) do not support it as a better alternative to the current Holstein bull production.

Abstract

The aim of this study was to characterize three different commercial dairy beef fattening systems for intensive Mediterranean fattening programs differing in gender, breed, nutrition, and days of feed in order to describe their performance, behavior, and carcass and meat quality when they were raised simultaneously under the same housing and care conditions. Treatments were three different production systems: (1) crossbred Holstein x beef breeds such as Charolais or Limousine heifers, slaughtered at 10 months of age (CBH10, n = 41); (2) Holstein bulls, slaughtered at 11 months of age (HB11, n = 42); and (3) crossbred Holstein x Angus bulls, slaughtered at 12 months of age (CAB12, n = 37). According to our results, moving from a production system based on Holstein bulls to the crossbred Angus production system has no technical support as no large production and meat quality improvements were observed, and only marketing strategies for meat differentiation and consumer trends could favor this decision.

Consumer Perception of Beef Quality and How to Control, Improve and Predict It? Focus on Eating Quality

Quality refers to the characteristics of products that meet the demands and expectations of the end users. Beef quality is a convergence between product characteristics on one hand and consumers’ experiences and demands on the other. This paper reviews the formation of consumer beef quality perception, the main factors determining beef sensory quality, and how to measure and predict beef eating quality at scientific and industrial levels. Beef quality is of paramount importance to consumers since consumer perception of quality determines the decision to purchase and repeat the purchase. Consumer perception of beef quality undergoes a multi-step process at the time of purchase and consumption in order to achieve an overall value assessment. Beef quality perception is determined by a set of quality attributes, including intrinsic (appearance, safety, technological, sensory and nutritional characteristics, convenience) and extrinsic (price, image, livestock farming systems, commercial strategy, etc.) quality traits. The beef eating qualities that are the most valued by consumers are highly variable and depend mainly on the composition and characteristics of the original muscle and the post-mortem processes involved in the conversion of muscle into meat, the mechanisms of which are summarized in this review. Furthermore, in order to guarantee good quality beef for consumers in advance, the prediction of beef quality by combining different traits in scenarios where the animal, carcass, and muscle cuts can be evaluated is also discussed in the current review.

Assessment of Quality Indices and Their Influence on the Texture Profile in the Dry-Aging Process of Beef

The aim of this study was to investigate the effects of the dry-aging method on the sensory properties, chemical composition, and profile parameters of the texture of beef obtained from local farms. The qualitative characteristics of the beef were investigated for five samples, respectively, fresh meat, and dry-aged beef for 14, 21, 28, and 35 days, in aging rooms with controlled parameters: temperature (1 ± 1 °C), relative humidity (80 ± 5%), and air circulation speed (0.5–2 m/s). During the dry-aging period, there was a decrease in humidity by about 6.5% in the first 21 days, which allowed the concentration of fat, protein, and total collagen content. The dry-aging process considerably influenced the pH value of the meat, which, in the second part of the dry-aging process (14–35 days), increased from 5.49 to 5.66. These values favored the increase by 37.33% of the water retention capacity and the activation of the meat’s own enzymes (calpain, cathepsin, collagenase). This influenced the solubilization process of proteins and collagen, thus contributing to the improvement of the texture profile. Because variations in organoleptic and physicochemical parameters occurred simultaneously during dry-aging and storage, the method of analyzing the information was applied. Mutual information on the influence of physicochemical indicators on the texture profile parameters was followed, a factor of major importance in the consumer’s perception. The degree of influence of soluble proteins, sarcoplasmic and myofibrillar proteins, fats, and soluble collagen content on the texture profile parameters (hardness, cohesiveness, springiness, gumminess, and chewiness) of the dry-aged beef for 35 days was established. These investigations allowed the optimization of the beef dry-aging technological process in order to obtain a product with a sensory profile preferred by the consumer.

Creating a Rainbow for Sustainability: The Case of Sustainable Beef

Sustainability is a complex, multi-dimensional issue that requires contributions from diverse disciplines, perspectives, and actors. Research and innovation are recognised as having the potential to help address some of the trade-offs and synergies associated with sustainability, and interactive innovation in particular offers many advantages. The beef sector has faced significant sustainability challenges in recent times, with criticisms relating to greenhouse gas (GHG) production, biodiversity, water quality, human health, and animal welfare, along with economic challenges to the viability of the sector. Furthermore, the low level of adoption of solutions proposed by research to address these challenges indicates the need for a pan-European multi-actor network to produce actionable and usable information to support European beef farmers. Drawing on practice-based research, the purpose of this exploratory paper was to examine how interactive innovation can be supported in a sector that, to date, has been the focus of limited interactive innovation efforts. It concluded that a “rainbow” of actors and diverse knowledges, along with different types of innovation intermediaries, can enhance the sustainability of the beef sector.

Current perspective on veterinary drug and chemical residues in food of animal origin

The marked increase in the demand for animal protein of high quality necessitates protecting animals from infectious diseases. This requires increasing the use of veterinary therapeutics. The overuse and misuse of veterinary products can cause a risk to human health either as short-term or long-term health problems. However, the biggest problem is the emergence of resistant strains of bacteria or parasites. This is in addition to economic losses due to the discarding of polluted milk or condemnation of affected carcasses. This paper discusses three key points: possible sources of drug and chemical residues, human health problems, and the possible method of control and prevention of veterinary drug residues in animal products.

Cotton cake as an economically viable alternative fibre source of forage in a high-concentrate diet for finishing beef cattle in feedlots

Cotton cake can be a sustainable and economically viable alternative to maize silage as an effective fibre source in the finishing diet of feedlot beef cattle. Thus, the objective was to evaluate the economic viability and the productive performance of Nellore steers finished in feedlots using cotton cake as a source of fibre, replacing maize silage in the diet. Twenty-four non-castrated Nellore steers, with an average weight of 377.8 kg and an age of approximately 24 months, kept in individual pens, were used. The diet was 30% roughage, in the form of maize silage, and a diet without forage containing 30% cotton cake as an effective fibre source, based on dry matter. The design used was completely randomised with two treatments and 12 replications. Effects (p < 0.05) of the dietary fibre source were observed for final body weight (BW), total weight gain, hot carcass weight (HCW) and carcass yield (CY). Revenue and net margin were higher for the treatment with cotton cake. The corn silage diet promoted higher total costs per animal (U$ 408.41 vs. U$ 336.06) and daily costs (U$ 3.65 vs. U$ 3.00). Greater differences were observed between fibre sources for the concentrate cost, and the maize silage diet had a cost U$ 98.29 higher than the treatment with cotton cake (U$ 314.04 vs. U$ 215.75). The cotton cake treatment had a higher cost of U$106.98/animal for the net margin. Cotton cake is a viable alternative and can be used as a source of fibre in forage-free diets without affecting production performance, promoting benefits in economic performance for finishing beef steers in feedlots.

Review: On-farm and processing factors affecting bovine carcass and meat quality

This paper reviews the current state of knowledge on beef carcass and meat quality, with particular emphasis on on-farm and processing factors associated with its high and inconsistent variability. The diversity of livestock systems comes from the diversity of breeds (dairy or beef), ages and gender (bulls, steers, heifers, cull cows) used to produce either mainly beef or beef and milk. In addition, there are factors linked to farming practices (including diet, especially grazing) which significantly influence the sensory, nutritional, technological and extrinsic (such as image) quality attributes of meat. These can become factors of positive differentiation when controlled by the application and certification of technical specifications. Finally, preslaughter (such as stress), slaughter (such as the chilling and hanging method of carcasses) and postslaughter (such as ageing, packaging and cooking) conditions have a strong influence on the microbiological, sensory, technological and image quality attributes of beef. In this review, potential synergisms or antagonisms between the different quality attributes are highlighted. For example, finishing cattle on grass, compared to indoor fattening on a high concentrate diet, has the advantage of producing leaner meat with a higher proportion of omega-3 fatty acids while exhibiting superior oxidative stability, but with the consequence of a darker meat colour and lower productivity, as well as higher seasonality and land surface requirements. Moreover, the control of on-farm factors is often guided by productivity (growth rate, feed conversion ratio) and carcass quality attributes (weight, conformation and fatness). Genetic selection has often been oriented in this direction, without taking other quality attributes into account. Finally, the interactions between all these factors (and especially between on-farm and slaughter or processing factors) are not considered in the quality grading schemes in European countries. This means that positive efforts at farm level may be mitigated or even eliminated by poor slaughtering or processing conditions. All these considerations explain why between-animal variability in quality can be high, even when animals come from the same farming system. The ability to predict the sensory and nutritional properties of meat according to production factors has become a major objective of the supply chain.

Beef from Calves Finished with a Diet Based on Concentrate Rich in Agro-Industrial By-Products: Acceptability and Quality Label Preferences in Spanish Meat Consumers

Conjoint analysis was used to estimate the relative importance of some of the main extrinsic attributes and quality labels of beef in three Spanish cities (Córdoba, Marbella, and Santa Pola) in a study performed with 300 individuals. Consumers were segmented according to their frequency of consumption. Willingness to pay for different meats was also calculated from the conjoint analysis results. Consumer liking of beef that had been finished with an alternative concentrate rich in agro-industrial by-products and aged for three different durations as compared to conventionally finished beef was also evaluated using the same consumers. The most important attribute for Spanish consumers was the price (28%), followed by origin (25%), animal welfare certification (19%), protected geographical indication (14%), and organic agriculture certification (14%). Most consumers preferred beef from Spain at the lowest possible price and with the highest number of quality labels. Consumers were willing to pay a premium of 1.49, 3.61, and 5.53 EUR over 14 EUR/kg for organic certification, protected geographical indication, and animal welfare certification, respectively. Sensory analysis revealed that, for regular consumers, beef finished with an alternative concentrate rich in agro-industrial by-products offered several hedonic advantages (color, flavor, and tenderness) when compared to beef finished using a conventional diet, while occasional consumers did not find any difference between the two kinds of meat.

Review of factors affecting consumer acceptance of cultured meat

Concerns about animal welfare and sustainable meat production are growing among consumers. The awareness of carbon emissions linked to livestock and ethical concerns have triggered interest in more sustainable meat alternatives, among which cultured meat (also known as laboratory grown meat) is a recent entry. Like any new food, the ultimate success of cultured meat depends on consumer acceptance. This study analyses the peer-reviewed literature on consumer attitudes towards cultured meat to synthesize the existing evidence and identify priorities for future research. A systematic literature review was undertaken using the Web of Science, Science Direct and Scopus databases over 2008-2020, resulting in a final number of 43 articles meeting our selection criteria. The most important factors influencing consumer acceptance/rejection of cultured meat include public awareness, perceived naturalness, and food-related risk perception. Ethical and environmental concerns prompted consumers to be willing to pay a premium price for purchasing meat substitutes, but not necessarily cultured meat. Also, food neophobia and uncertainties about safety and health seem to be important barriers to uptake of this technology. Availability of other alternatives such as plant-based meat substitutes and product features, such as price and sensory appeal, are considered determinants of consumer reception of this technology. The effect of demographic factors is mixed. More research on the interrelationships between livestock production, food security, and alternative meat products is recommended.

Biosecurity at Cattle Farms: Strengths, Weaknesses, Opportunities and Threats

Biosecurity is a key component of any animal and public health strategy and disease prevention and control programs. This study reviewed the main findings of different studies implemented from 2015 to 2021 to analyse the biosecurity situation at Belgian cattle farms, including attitudes and behaviours of cattle farmers and rural veterinarians regarding biosecurity measures. Specifically, the objective was to perform a SWOT (strengths, weaknesses, opportunities and threats) analysis of the situation and propose a new conceptual framework improving the level of biosecurity in the cattle sector. Biosecurity in cattle farming remains relatively low and faces multiple challenges. Its future improvement requires the different stakeholders to agree on shared goals and objectives and to carefully consider animal, public and environmental health, as well as socioeconomic and cultural factors. Further cost efficiency studies are required to identify the most important biosecurity measures and convince the stakeholders of their utility and benefits. Cattle farmers rely mainly on rural veterinarians for technical guidance and consider them as trustful informants. To be more effective in promoting these good practices, rural veterinarians need a proper guidance from the authorities, a proper training on biosecurity and communication, as well as an enabling environment.

Animal board invited review - Beef for future: technologies for a sustainable and profitable beef industry

The global consumption, notably in developing countries, and production of beef are increasing continuously, and this requires the industry to improve performance and to reduce the environmental impact of the production chain. Since the improvement in efficiency and the highest impacts occur at farm level, it is appropriate to focus on the profitability and environmental sustainability of these enterprises. In many areas of the world, beef production is economically and socially relevant because it accounts for a significant portion of the agricultural production and represents a vital economic activity in mountain and hill districts of many regions, where few alternatives for other agricultural production exist. Due to the important role in the agricultural and food economy worldwide, the future of the beef industry is linked to the reduction of ecological impacts, mainly adopting the agroecological mitigation practices, and the simultaneous improvement of production performances and of product quality. This review analyses the technical and managerial solutions currently available to increase the efficiency of the beef industry and, at the same time, to reduce its environmental impacts in response to the growing concerns and awareness of citizens and consumers.

Bacterial quality and safety of raw beef: A comparison between Finland and Nigeria

Beef can easily be contaminated with bacteria during the meat production chain. In this work, we studied the contamination levels of mesophilic aerobic bacteria (MAB) and thermotolerant coliform bacteria (TCB) on raw beef surfaces from small shops in Helsinki, Finland and meat markets in Benin City, Nigeria. We also investigated the prevalence of Salmonella, Campylobacter, Yersinia, Shiga toxin-producing Escherichia coli (STEC), Listeria, and cephalosporin-resistant E. coli (CREC). In total, one hundred unpacked raw beef samples from Finland and Nigeria were collected in 2019. The median MAB and TCB counts were significantly (P < 0.001) higher on beef from Nigeria than from Finland. The median MAB and TCB counts in Nigeria were 7.5 and 4.0 log₁₀ cfu/cm², respectively, and 6.5 and 2.8 log₁₀ cfu/cm² in Finland, respectively. Most (94%) Nigerian samples were unacceptable according to limits set by the EU. Beef samples from meat markets in Benin City were significantly (P < 0.05) more frequently contaminated with Salmonella, STEC, and CREC than beef samples from small shops in Helsinki. Salmonella, STEC, and CREC were isolated from 30, 36, and 96% of Nigerian samples, respectively, and from <2, 12, and 2% of Finnish samples, respectively. Our study demonstrates a significant difference between the bacterial contaminations of raw beef in Nigeria and Finland, along with a possible misuse of cephalosporins in animal husbandry in Nigeria.

Effect of ovulation synchronization program and season on pregnancy to timed artificial insemination in suckled beef cows

This study was conducted to (i) evaluate the requirement for the administration of GnRH coincident with insertion of a progesterone-releasing intravaginal device (PRID) and (ii) the effect of supplementing with 400 IU eCG at PRID removal on pregnancy per AI (P/AI) in spring and autumn calving suckled beef cows, subjected to a 7-d CO-Synch + PRID timed artificial insemination (TAI) program. Suckled beef cows (n = 1408) on 62 commercial farms were enrolled and randomly assigned to either of three treatments: 1) cows received a PRID and 100 μg GnRH on Day -10, followed by 25 mg PGF_2α at PRID removal (Day -3) and 100 μg GnRH 72 h later (Day 0) at TAI (Treatment 1; n: spring = 236, autumn = 248); 2) as Treatment 1, but without GnRH at PRID insertion on Day -10 (Treatment 2; n: spring = 232, autumn = 227); 3) as Treatment 1, but cows also received 400 IU eCG at PRID removal on Day -3 (Treatment 3; n: spring = 233, autumn = 232). At Day -10, ovaries were examined by ultrasonography to evaluate the presence or absence of a corpus luteum (CL) and follicle(s) ≥ 10 mm in diameter. Body condition score (BCS) was assessed on a scale of 1-5. Pregnancy diagnosis was carried out 30-35 d after TAI by transrectal ultrasonography. Data were analyzed using the GENMOD and LOGISTIC procedures of SAS. There was a treatment by season interaction for P/AI (P < 0.001). In spring, overall P/AI was 59.1% (414/701) and was affected by treatment (59.3 v 49.6 v 68.2%, for Treatments 1, 2 and 3, respectively P < 0.05). In contrast, in autumn, overall P/AI (51.5%, 364/707) was unaffected (P > 0.05) by treatment (50.1 v 53.7 v 48.7% for Treatments 1, 2 and 3, respectively). Overall, eCG had a positive effect on P/AI for cows lacking a CL at treatment initiation (P < 0.05). In addition, in cows with low BCS (≤2.25), eCG supplementation tended (P = 0.09) to improve P/AI. Seasonal differences in response to synchronization treatment may be reflective of different management regimens (grazing v confinement) and breed type and remain to be elucidated.

Review: An overview of beef production from pasture and feedlot globally, as demand for beef and the need for sustainable practices increase

Beef is a high-quality source of protein that also can provide highly desirable eating experiences, and demand is increasing globally. Sustainability of beef industries requires high on-farm efficiency and productivity, and efficient value-chains that reward achievement of target-market specifications. These factors also contribute to reduced environmental and animal welfare impacts necessary for provenance and social licence to operate. This review provides an overview of beef industries, beef production, and beef production systems globally, including more productive and efficient industries, systems and practices. Extensive beef production systems typically include pasture-based cow-calf and stocker-backgrounding or grow-out systems, and pasture or feedlot finishing. Cattle in pasture-based systems are subject to high levels of environmental variation to which specific genotypes are better suited. Strategic nutritional supplementation can be provided within these systems to overcome deficiencies in the amount and quality of pasture- or forage-based feed for the breeding herd and for younger offspring prior to a finishing period. More intensive systems can maintain more control over nutrition and the environment and are more typically used for beef and veal from dairy breeds, crosses between beef and dairy breeds, and during finishing of beef cattle to assure product quality and specifications. Cull cows and heifers from beef seedstock and cow-calf operations and dairy enterprises that are mostly sent directly to abattoirs are also important in beef production. Beef production systems that use beef breeds should target appropriate genotypes and high productivity relative to maintenance for the breeding herd and for growing and finishing cattle. This maximizes income and limits input costs particularly feed costs which may be 60% or more of production costs. Digital and other technologies that enable rapid capture and use of environmental and cattle performance data, even within extensive systems, should enhance beef industry productivity, efficiency, animal welfare and sustainability.

A Retrospective, Observational Study on Antimicrobial Drug Use in Beef Fattening Operations in Northwestern Italy and Evaluation of Risk Factors Associated with Increased Antimicrobial Usage

Simple Summary

Antimicrobial usage in veterinary medicine is thought to be a source of antimicrobial resistance, with possible implications for human health. Certain antibiotics are considered critical for human health, and their use is being judiciously reduced in animal productions. The monitoring of antimicrobial consumption in animal production is key to lowering the risk of the development of antimicrobial resistance. With this study, we quantified antimicrobial usage in beef fattening operations in northwestern Italy before the implementation of a program intended to control antimicrobial usage in veterinary medicine. We found that antimicrobials defined as critical for human health (e.g., fluroquinolones) were often used also for metaphylactic treatment.

Abstract

The abuse or misuse of antimicrobials in animal production is thought to be a potential factor in the development of antimicrobial resistance in veterinary and human medicine. With this study, we wanted to quantify antimicrobial usage in beef fattening operations in northwestern Italy and to identify factors potentially influencing antimicrobial usage. The sample was composed of 26 beef fattening operations that import heifers and bulls from France. Data were extracted from the 2014 and 2015 treatment registers kept by the farmers. The mean (±SD) number of animal daily doses per animal (nADDa) per year for each farm was 3 (±2.1) during the study period (2014–2015). Group antimicrobial treatments (57.5% of all treatments) were often administered orally (70.5%) and consisted overwhelmingly of doxycycline (97%). Individual treatments (42.5% of all treatments) were administered parenterally (98.1%) and the most often used active substances were florfenicol (19.9%), marbofloxacin (19.5%), and tylosin (12.4%). There was a negative correlation between the nADDa for total and group treatments and average batch weight at arrival and between the amount of straw added per animal per day and the nADDa (p ≤ 0.05). Our data show that antimicrobials critical for human medicine were often used in beef fattening operations in northwestern Italy before the European guidelines for the prudent use of antimicrobials in veterinary medicine were issued. Additionally, the use of antimicrobials as a preventive group treatment was still widespread, mostly in lighter weight animals.

Are Marbling and the Prediction of Beef Eating Quality Affected by Different Grading Sites?

For the European abattoirs, the preferred carcass grading site is at the fifth rib, and cutting at the tenth rib as in Australia could lead to a lower economic value of the carcass. Therefore, the objective of this study was to compare the grading scores of marbling and the meat and fat color on Musculus longissimus thoracis et lumborum (LTL) at the fifth and the tenth thoracic vertebrae. The consequences on the prediction of beef eating quality using the Meat Standards Australia (MSA) grading scheme were also evaluated for cull cows, which produce the majority of beef consumed in France. Carcasses from 208 French cattle, mainly Limousine cows, were graded according to the Australian Beef Carcase Chiller Assessment System (ABCAS) used for the implementation of the MSA system. The results indicate that there was no significant difference in the marbling score, between the fifth and the tenth ribs and hence in the MSA index and in the Global Quality [meat quality (MQ4)] scores calculated from marbling values from either the fifth rib or the tenth rib. However, the meat color at the tenth rib was significantly darker than that at the fifth rib (p < 0.01), and the fat color at the tenth rib was significantly yellower than that at the fifth rib (p < 0.001). The results of this study suggest that the grading of marbling can be conducted on M. LTL at the fifth thoracic vertebrae for routine use of the MSA system in France and, more generally, in Europe. However, further investigation and adjustment would be needed for other critical MSA scores (such as rib fat thickness) while respecting the European carcass quartering practices.

Implementation of management recommendations in unweaned dairy calves in western Germany and associated challenges

To improve the welfare of livestock, it is important to assess management practices on farms and to identify areas where current scientific recommendations are rarely implemented. Differences in the implementation of recommendations might be explained by the individual farm as well as the characteristics of survey respondents and their attitude toward animal welfare. Hence, the aim of this study was to assess dairy calf management practices, compare them with current scientific recommendations, and to explore factors that influence implementation of the recommended management practices. A 1.5-h interview was performed with stockpersons on 42 dairy farms (mean herd size ± SD = 149.9 ± 16.6 cows) distributed across western Germany in 2018 to 2019. We observed that the management of unweaned calves varied greatly from farm to farm in aspects such as milk-feeding protocols; timing of grouping and disbudding; and access to water, roughage, and concentrate. Major deviations from management recommendations were (1) cleaning calving pen only by removal of bedding without a following disinfection before restocking on 23.8% farms, cleaning of teat buckets without detergents and disinfection (23.8 and 11.9% of farms, respectively), and failure to disinfect navels (29.3% of farms); (2) separating calf and dam after only 5 to 8 h postpartum for calving at night in 97.6% farms and unchecked colostrum quality by 23.8% of survey respondents; (3) feeding waste milk by 72.4% of the farms surveyed; and (4) removing supernumerary teats and disbudding without local anesthesia (90 and 80% farms surveyed, respectively). The number of implemented recommendations on the farms surveyed correlated with who was responsible for calf rearing, and whether prioritizing animal welfare was considered important by the respondents. This study indicated that limitations of individual housing systems, time management, the stockperson's knowledge, and the stockperson's ability to relate to animals posed challenges in implementation of the recommendations. Further research on challenges in calf management and how to overcome them would be helpful to improve calves' welfare in current husbandry systems.

The Welfare of Beef Cattle in the Scientific Literature From 1990 to 2019: A Text Mining Approach

Beef cattle are the third most numerous terrestrial farmed animals worldwide. Factors such as geographical region, animal category, breed, and rearing system pose specific animal welfare challenges that can have an impact on animal and public health. This article uses text mining (TM) and topic analysis (TA) to explore the scientific literature on beef cattle welfare published in English from 1990 to 2019. Our aim was to reveal the main research topics and their evolution over time. Our analysis showed that the three most relevant themes in research since 1990 have to do with calf behaviour and management, efficiency, and environmental sustainability, and the effects of transport and slaughter on meat quality. Topics showing the most marked increase in the number of papers published deal with stakeholders' perceptions and market opportunities for added-value beef products and risk factors for morbidity and mortality, especially in relation to calf health, antimicrobial use, and antimicrobial resistance. The results indicate a particular focus on the welfare of calves, especially in the veal industry. Pain relief during the castration of calves and bulls also featured prominently. Research is also increasingly assessing aspects of beef cattle welfare that are interlinked to meat quality, the social and environmental sustainability of the sector in relation to market opportunities, and public health. The identified topics represent a basic source of information that can be used for further and more detailed analyses (e.g., systematic reviews) focussed on specific research themes or geographical areas.

Animal food products: policy, market and social issues and their influence on demand and supply of meat

The present paper aims to contribute to the contentious debate regarding the role of meat as part of a sustainable diet. It uses secondary data to examine the patterns of meat consumption across the globe, and drawing on academic and grey literature, it outlines some of the policy, market and social trends and issues influencing demand and supply of meat. It also presents an overview of the scientific evidence base regarding the pros and cons of meat consumption. The results show that consumption patterns are not homogeneous globally, nor across meat types, with overall meat consumption increasing strongly in developing countries but stagnating in developed countries, and demand for poultry increasing in most regions in contrast to beef. They also illustrate the evolving impact of factors such as income on consumption and the increasing impact of non-economic factors, such as social and policy influences relating to health and the environment, on food choice behaviours, to the extent that such behaviours are increasingly entering a moral space. Given the solid scientific evidence that simultaneously substantiates arguments to increase and decrease meat consumption, it is clear that dietary recommendations need to be context-specific. An important part of the context is the strategies being pursued by researchers and supply chain actors, from farmers through to processors, retailers and food service operators, to improve the sustainability credentials of livestock production. As new evidence emerges from such initiatives, the context will change which means that dietary guidelines will require continuous review.

Exploring potential risk factors of antimicrobial use in beef cattle

Livestock species are major contributors to the increase of antimicrobial (AM) resistance which is a worldwide concern for both human and animal health. The over-use of AM is widely acknowledged, however, unlike pigs, poultry and dairy cattle, knowledge on potential risk factors affecting AM usage (AMU) in beef industry is limited. Hence, this study aimed to investigate the impact of farm, breed, sex and season of arrival of purchased beef cattle on AMU in Italian beef cattle. Data on 1063 batches were collected from January 2016 to April 2019 from specialised beef fattening farms located in the north of Italy. Information on breed, sex, date of arrival, performance traits and AM agents used on farm was collected, and the treatment incidence 100 (TI100) indexes per batch were calculated using the defined daily dose animal estimated according to Italian summaries of product characteristics. Factors affecting TI100 indexes were investigated using a cross-classified multilevel model. Farms largely differed in terms of AMU. Males had greater AMU than females (P < 0.001), likely due to their higher susceptibility to disease. Statistically significant differences were observed between seasons of arrival with summer and spring having lower TI100 indexes than winter and autumn (P < 0.001). Indeed, winter is commonly linked to an increase in respiratory diseases in beef cattle. Finally, the TI100it indexes tended to be different among breeds with Blonde d'Aquitaine and Limousine having greater AMU compared to the other breeds. Results of this study provided valuable information on potential risk factors of AMU in beef production which may be useful to address its reduction. For instance, the development of tailored management strategies for specific breeds, targeted approaches to improve the health of males as well as greater care towards batches purchased in winter are possible advice to implement on-farm for a more responsible AM stewardship.

Evaluation of Greek Cattle Carcass Characteristics (Carcass Weight and Age of Slaughter) Based on SEUROP Classification System

In Greece, all cattle carcasses produced from a variety of breed types are classified according to the SEUROP system. The objective of this study was to evaluate Greek carcass characteristics such as carcass weight and age of slaughter based on SEUROP classification system (muscle conformation and fat deposit classes) and to describe the effect of main factors such as breed, gender, year of slaughter, farm's geographical region and month of slaughter on these carcass parameters. It is the first study that evaluates local breeds, revealing the wide diversity of the Greek cattle breeding conditions. The analyzed records consisted of 323,046 carcasses from 2011 to 2017. All the examined factors significantly affected the mean carcass weight (298.9 ± 0.2 kg) and the mean slaughter age (559.1 ± 0.3 days). Carcasses from beef meat breeds had on average higher mean carcass weight while the local breeds had lower. The mean slaughter age and carcass weight were higher in winter than in summer. The local and the dairy breeds were classified in similar muscle conformation classes. Finally, Greek cattle carcasses from almost all regions were satisfactory for their quality carcass traits with good muscle conformation (R, O and U class) and low-fat deposit (class 1 to 3).

Validation of a beef cattle maternal breeding objective based on a cross-sectional analysis of a large national cattle database

Despite the importance of validating any technology prior to recommendation for use, few studies exist in the scientific literature which have demonstrated the superior performance of high-ranking animals in a given total merit index; this is especially true for maternal cattle selection indexes. The objective of the present study was to demonstrate the impact of the Irish total merit maternal-based index and provide the benefits of using the Irish total merit maternal-based beef index as part of a breeding policy. The validation exercise was undertaken using 269,407 records (which included the cow's own records and her progeny records) from 92,300 females differing in a total merit index for maternal value; a comparison was also made with the Irish terminal index. Association analyses were undertaken within the framework of linear and threshold mixed models; the traits analyzed were fertility (e.g., calving interval), slaughter (e.g., harvest weight), live weight (e.g., weaning weight), and producer-recorded traits (e.g., docility). All traits were analyzed with the maternal index and terminal index fitted as covariate(s) separately. Depending on the independent variable analyzed, the other fixed effects included: parity of cow, heterosis and recombination loss of cow and/or progeny, gender of progeny, and the estimated breeding value of the sire; contemporary group was included as a random effect. The results demonstrate the effectiveness of using total merit indexes to improve performance in a whole range of different traits, despite the often antagonistic genetic correlations among traits that underpin the index. Cows excelling on the maternal index had less calving difficulty, superior fertility performance, lighter carcasses, and live weight, as well as being more easily managed. Additionally, progeny of higher maternal index cows were lighter at birth and more docile albeit with a small impact on slaughter traits. In contrast, higher terminal index cows had more calving difficulty, compromised fertility and had heavier carcasses themselves as well as their progeny. While the differences in phenotypic performance between groups on maternal index was, in most instances, relatively small, the benefits are: (1) expected to be greater when more genetically extreme groups of animals are evaluated and (2) expected to accumulate over time given the cumulative and permanent properties of breeding schemes.

Ruminal Fermentation Pattern, Bacterial Community Composition, and Nutrient Digestibility of Nellore Cattle Submitted to Either Nutritional Restriction or Intake of Concentrate Feedstuffs Prior to Adaptation Period

Beef cattle are key contributors to meat production and represent critical drivers of the global agricultural economy. In Brazil, beef cattle are reared in tropical pastures and finished in feedlot systems. The introduction of cattle into a feedlot includes a period where they adapt to high-concentrate diets. This adaptation period is critical to the success of incoming cattle, as they must adjust to both a new diet and environment. Incoming animals are typically reared on a variety of diets, ranging from poor quality grasses to grazing systems supplemented with concentrate feedstuffs. These disparate pre-adaptation diets present a challenge, and here, we sought to understand this process by evaluating the adaptation of Nellore calves raised on either grazing on poor quality grasses (restriction diet) or grazing systems supplemented with concentrate (concentrate diet). Given that nutrient provisioning from the diet is the sole responsibility of the ruminal microbial community, we measured the impact of this dietary shift on feeding behavior, ruminal fermentation pattern, ruminal bacterial community composition (BCC), and total tract digestibility. Six cannulated Nellore bulls were randomly assigned to two 3 × 3 Latin squares, and received a control, restriction, or concentrate diet. All cohorts were then fed the same adaptation diet to mimic a standard feedlot. Ruminal BCC was determined using Illumina-based 16S rRNA amplicon community sequencing. We found that concentrate-fed cattle had greater dry matter intake (P < 0.01) than restricted animals. Likewise, cattle fed concentrate had greater (P = 0.02) propionate concentration during the adaptation phase than control animals and a lower Shannon’s diversity (P = 0.02), relative to the restricted animals. We also found that these animals had lower (P = 0.04) relative abundances of Fibrobacter succinogenes when compared to control animals during the pre-adaptation phase and lower abundances of bacteria within the Succinivibrio during the finishing phase, when compared to the control animals (P = 0.05). Finally, we found that animals previously exposed to concentrate were able to better adapt to high-concentrate diets when compared to restricted animals. Our study presents the first investigation of the impact of pre-adaptation diet on ruminal BCC and metabolism of bulls during the adaptation period. We suggest that these results may be useful for planning adaptation protocols of bulls entering the feedlot system and thereby improve animal production.

Effects of A Concentrate Rich in Agro-Industrial By-Products on Productivity Results, Carcass Characteristics and Meat Quality Traits of Finishing Heifers

Finishing diets in intensive beef production systems are mainly based on cereals, which does not take advantage of the capacity of the ruminant digestive system to digest fibrous feeds, cannot be considered sustainable and does not contribute to the circular bioeconomy. Our aim was to investigate the effects of an alternative concentrate rich in agro-industrial by-products for finishing crossbred Limousine heifers. Four pens with 12 heifers and four pens with 13 heifers were randomly allocated to one of two treatments: control (CON), a commercial concentrate with a 43.3% cereal composition, and alternative (ALT), a concentrate with a composition of 26% cereals and up to 73.5% agro-industrial by-products. Growth performance data were collected along the 91 days of the experimental period. Carcass characteristics were collected after slaughter and 24 h later. Vacuum-packaged samples from longissimus muscle were aged for 7, 21 or 28 days to study meat quality traits. Feed intake was higher and feed conversion rate was lower in the ALT treatment, but no differences were found in average daily gain and feeding costs. Treatment had no effects on any of the measured carcass traits (grading, hot and cold carcass weight, dressing out, chilling losses, subcutaneous fat depth, pH, temperature and lean and fat colour) nor on the meat quality traits (drip loss, cooking loss, shear force, oxidative stability, chromatic indices and pigment contents). Ageing time decreased drip loss and shear force, increased lightness and did not affect redness or surface colour stability. In conclusion, feeding crossbred Limousine heifers a finishing diet rich in agro-industrial by-products did not have any negative effects on performance, carcass and meat quality traits, which might be considered positive from the point of view of sustainability of beef production. Under the conditions assayed, ageing for 21 and 28 days improved tenderness of meat, without detrimental effects on oxidative stability or traits related to visual acceptability.

Trade and safety issues of raw beef from the countryside of Bahia state, Brazil

Background: Brazil is one of the world's largest meat exporters. However, there is a paradox in this situation due to existing non-inspected meat trade and technical-sanitary failures in retail marketing. Design and methods: This study aimed at characterizing the issues of trade, food safety and quality of raw beef in the street market of a municipality in the state of Bahia. An exploratory, quantitative and census study was carried out, at 17 raw beef vending locations. A questionnaire was administered and meat samples were collected (n=34), which were submitted to a physicochemical assessment, color analysis and microbiological analyses. Results: Meat sellers were between 20 and 64 years of age, predominantly males (82.4%), with limited education and without professional training (64.7%). Medians for temperature and pH in the small butcher shops samples were 18.10ºC and 5.75 respectively, and 21.80ºC and 5.50, in small supermarkets samples. The difference in pH was significant (p<0.05). The filtration test suggested quality changes in 17.65% of the samples. No frauds were detected. Total coliform count medians were 4.90 and 4.78 log CFU/g, for the samples taken from butcher shops and supermarkets, respectively. E. coli was identified in approximately 40.0% of the samples. Salmonella spp. were confirmed in two samples collected in the butcher shops. There was a significant association between inadequate storage conditions and microorganism counts (p<0.02). Conclusions: The results evidenced a meat supply with preservation failures and non-compliance with hygiene requirements, constituting a consumers' health hazard, not in line with an agroexporting country model.

European conformation and fat scores of bovine carcasses are not good indicators of marbling

Marbling is one of the primary carcass attributes utilized in most beef grading systems for eating quality evaluation. In Europe, the current beef grading system is the EUROP grid, which is focused on carcass commercial value and production yield rather than eating quality estimation. The aim of this study was to investigate the relationship between marbling and the most common scores for carcass classification in Europe. If there are strong associations between marbling and European classification scores, marbling score may be estimated from the carcass characteristics. However, this study indicated that European classification scores explain only a slight proportion of the variance in marbling score (32%, 46%, 34% and 21% for the entire cattle group, young bulls, females and steers, respectively). Therefore, whereas the EUROP grid is well adapted to estimate yield, it does not reflect marbling at all. The European beef industry should take into account additional indicators related to beef palatability to assist the determination of the commercial value of carcasses.

Use of antimicrobials in beef cattle: an observational study in the north of Italy

Antimicrobial resistance is a worldwide issue whereby a more prudent use of medications is needed, especially for those antimicrobials (AM) classified as 'highest priority critically important antimicrobials' (HPCIAs) which are likely contributors to the development of resistance. So far, data on antimicrobial use (AMU) in EU are mainly reported at sales level while information on real use, mostly in beef production, is poor. The most reliable indicator to measure AMU is the treatment incidence (TI100) calculated by using the Defined Daily Dose Animal (DDDA) as stated by the European Medicines Agency (EMA). Although Italy ranks second among EU countries with regard to the AM sales in livestock production, data on AMU of the Italian beef production is still lacking, whereby the aim of this study was to provide information on the current scenario of AMU in Italian beef cattle. Data were collected from January 2016 to April 2019 from specialized beef fattening farms located in the north of Italy yielding a final dataset of 1376 batches. Data on performance and AM agents used in the study were collected and TI100 indexes per batch were calculated according to both Italian and EMA's DDDA. A Kruskal-Wallis test was used to check for differences between years and seasons. Results showed a significant variation between years and seasons with a reduction of TI100 based on Italian DDDA as time progressed (P < 0.05). However, about 40% of the total amount of treatments administered were HPCIAs with macrolides accounting for the 27.7% of the total amount. The most common reasons of administration of AM were respiratory diseases (68.9%) and lameness (17.6%). Penicillins was the class of AM used on the highest proportion of batches (84.4%) showing that broad-spectrum AM were widely exploited among herds. In summary, despite a general reduction of AMU in beef cattle over time, a great use of HPCIAs was still observed suggesting that AM stewardship for Italian beef production should pay particular emphasis on the reduction of HPCIAs use. This shows how overall knowledge on where efforts need to be optimized is important to develop targeted strategies for a more responsible AM stewardship. Results of the current study may also contribute to define national and EU benchmark criteria for AMU, as a comparison with studies carried out in other countries or on other food-producing sectors is still challenging to achieve.

Environmental Impacts of Beef as Corrected for the Provision of Ecosystem Services

We aimed to assess whether the environmental impacts in terms of global warming potential (GWP), acidification potential (AP), eutrophication potential (EP), and land occupation (LO) of beef can be decreased when ecosystem and cultural/provisioning services are included in the evaluation. We used four Italian production systems: Fat, with beef imported calves kept in confinement; CoCaI, with beef cows and calves kept in confinement; SpEx, with beef cows and calves kept on pasture and finishing conducted in confinement; and Pod, with Podolian cows and calves kept on pasture and finishing conducted in confinement. After the economic allocation, the GWP of system Pod decreased considerably and showed values lower than those computed for systems CoCaI and SpEx (P < 0.05 and P < 0.001, respectively). System Pod showed the lowest AP and EP as compared with all the other systems (P < 0.01). Systems Fat and CoCaI showed the smallest LO, with values lower than systems Pod (P < 0.05) and SpEx (P < 0.001). We conclude that the environmental impacts of extensive and local beef production systems in terms of GWP, AP, and EP was markedly reduced when the provision of accessory services was included in the calculation. Conversely, LO did not markedly change due to the high absolute values needed to allow pasture-based feeding. The estimation of additional positive aspects linked to the use of natural pastures, such as removal of carbon dioxide, increased biodiversity, and exploitation of feeds nonedible by humans, may allow a further reduction of LO.

Various Statistical Approaches to Assess and Predict Carcass and Meat Quality Traits

The beef industry is organized around different stakeholders, each with their own expectations, sometimes antagonistic. This article first outlines these differing perspectives. Then, various optimization models that might integrate all these expectations are described. The final goal is to define practices that could increase value for animal production, carcasses and meat whilst simultaneously meeting the main expectations of the beef industry. Different models previously developed worldwide are proposed here. Two new computational methodologies that allow the simultaneous selection of the best regression models and the most interesting covariates to predict carcass and/or meat quality are developed. Then, a method of variable clustering is explained that is accurate in evaluating the interrelationships between different parameters of interest. Finally, some principles for the management of quality trade-offs are presented and the Meat Standards Australia model is discussed. The "Pareto front" is an interesting approach to deal jointly with the different sets of expectations and to propose a method that could optimize all expectations together.

The Effect of Animal Welfare Training on the Knowledge and Attitudes of Abattoir Stakeholders in China

Globally, China is one of the largest producers and exporters of meat, and animal welfare is an emerging focal issue for Chinese society and for primary producers. We assessed the effectiveness of a "train the trainer" program to increase awareness of animal welfare issues in stakeholders in the livestock industries of China. Chinese abattoir employees were trained in slaughter and transportation standards in either a classroom setting or using posted materials. They subsequently held training sessions within their own workplace and the participants were surveyed either before (n = 161) or after (n = 147) their training. The post-training group had more confidence to improve the welfare of animals in their care than the pre-training group (p = 0.03), and also scored better on the knowledge section of the survey (p = 0.006) only when the facilitator was trained in the classroom setting. The participants' knowledge of animal welfare was also affected by living area (p = 0.005) and education (p = 0.005). Participants with the least formal education (to middle school only) scored lower than all other participants. Female respondents reported more positive attitudes towards animal welfare than males (p = 0.009). These results indicate that training can effectively improve stakeholder knowledge on animal welfare during slaughter and transport, however, the mode of delivery has an important influence on learning success, and participant demographics, such as gender and education level, need to be considered when preparing training material.

Health, behaviour and growth performance of Charolais and Limousin bulls fattened on different types of flooring

Intensive fattening of late-maturing breeds on concrete or rubberized slatted floors is the prevalent beef production system in mainland Europe. The rationale behind this study is that specific beef breeds with different slaughter weights might have a diverse response to different flooring systems. The study aimed at assessing whether growth performance, health, behaviour and claw condition of two beef breeds, Charolais (CH) and Limousine (LIM), would be affected by their housing on concrete (CS) or rubber-covered (RCS) fully slatted floor. A total of 228 CH (116 on CS; 112 on RCS) and 115 LIM (57 on CS; 58 on RCS) were housed in four and two commercial farms, respectively, in groups of 9.0 ± 2.1 animals/pen with an average space allowance of 3.1 ± 0.2 m2. Draining gaps of CS and RCS pens were 16.9 ± 1.7% and 11.6 ± 1.2% of the total surface, respectively. Bulls of both breeds had similar initial body weight (429.4 ± 31.5 kg for CH; 369.6 ± 31.7 kg for LIM), and they were slaughtered when they reached suitable finishing. Charolais had a higher final body weight (BW) than LIM (750.8 ± 8.6 v. 613.7 ± 10.9 kg; P < 0.01), and bulls of both breeds on RCS had higher average daily gain than on CS (1.47 ± 0.02 v. 1.39 ± 0.02 kg/day; P < 0.05). The percentage of bulls early culled or treated for locomotor disorders were reduced by RCS only for LIM, while RCS tended to prevent the occurrence of bursitis for both breeds. During two 8-h behavioural observations, bulls on RCS performed more head butt/displacements and chases than on CS, and they reduced the frequency of abnormal lying down events. The use of RCS increased mounts' frequency only in LIM, while its reduced drainage capacity impaired only the cleanliness of CH. Postmortem hoof inspection showed longer claw dorsal wall and diagonal lengths, and sharper toe angles for CH on RCS than LIM on both floors. Results of this study point out that fully slatted floors, regardless of being rubberized or not, are not suitable for bulls finished at a final BW above 700 kg due to their detrimental effects on health and welfare. The use of RCS could be recommended as an alternative to CS only if bulls are slaughtered at a lower final BW (around 600 kg), like in the case of LIM breed.

Epidemiological Survey and Retrospective Analysis of Salmonella Infections between 2000 and 2017 in Warmia and Masuria Voivodship in Poland

Background and Objectives: Salmonellosis is a major foodborne bacterial infection throughout the world. Epidemiological surveillance is one of the key factors to reduce the number of infections caused by this pathogen in both humans and animals. The first outcome measure was the prevalence of non-typhoid Salmonella (NTS) infections between 2000 and 2017 among the population of the predominantly agricultural and touristic Polish region of Warmia and Masuria (WaM). The second outcome measure was the comparison of the NTS hospitalization rate of all registered NTS cases, an investigation of the monthly reports of infections, and the exploration of the annual minimal and maximal NTS infection number in WaM in the above-mentioned time period. The last outcome was a comparison of the prevalence of NTS infections in the region and in its administrative districts by considering both rural and urban municipalities three years before and three years after the accession of Poland into the European Union (EU) in 2004. Materials and Methods: The total number of infections and hospitalizations in the 19 districts of the WaM voivodship in Poland was registered monthly between 2000–2017 by the Provincial Sanitary-Epidemiological Station in Olsztyn, Poland. Results: Between 2000 and 2017, the number of diagnosed salmonellosis cases decreased significantly in WaM; the decrease was higher in urban districts than in rural ones, and the ratio of hospitalizations and the total number of NTS cases increased significantly across all districts. The lowest number of cases was reported in the winter months and was stable from 2007, whereas the highest number was reported in the summer months with a higher tendency of outbreaks. Conclusion: The falling number of salmonellosis cases in 2000–2017 in WaM reflects the general trend in Poland and Europe. The decrease of NTS infections in WaM is related to the accession of Poland into the EU.

Characterisation of beef production systems and their effects on carcass and meat quality traits of Piemontese young bulls

Using the Piemontese breed as a case study, we characterised beef production systems within the EU classification, and investigated their effects on carcass and meat quality traits. The research involved 1,327 young bulls fattened on 115 farms. The production systems identified by hierarchical cluster analysis were: traditional (restricted feeding and either tie-stalls or loose-housing), modern breeders and fatteners and specialised fatteners (the last two were divided in those using or not using total mixed rations). Despite the large variability in management techniques within production systems, production systems affected (P < 0.05) farm size, animal density, environmental scoring, diet, slaughter age and all carcass traits except weight. Lightness (L*) of Longissimus thoracis was the only meat quality trait affected (P < 0.05), with values greater in the traditional tie-stall system (+0.9 L*). Given the very limited effect of production systems on meat quality traits, factors related to individual animals within farms, such as genetics, should be considered for their improvement.