Selective Cytotoxicity of a Novel Trp-Rich Peptide against Lung Tumor Spheroids Encapsulated inside a 3D Microfluidic Device

Selective Targeting of Lung Cancer Cells with Methylparaben-Tethered-Quinidine Cocrystals in 3D Spheroid Models

The development and design of pharmaceutical cocrystals for various biological applications has garnered significant interest. In this study, we have established methodologies for the growth of the methylparaben-quinidine cocrystal (MP-QU), which exhibits a well-defined order that favors structure-property correlation. To confirm the cocrystal formation, we subjected the cocrystals to various physicochemical analyses such as powder X-ray diffraction (PXRD), single-crystal X-ray diffraction (SCXRD), Raman, and IR spectroscopy. The results of the XRD pattern comparisons indicated no polymorphisms, and density functional theory (DFT) studies in both gaseous and liquid phases revealed enhanced stability. Our in silico docking studies demonstrated the cocrystal's high-affinity binding towards cancer-specific epidermal growth factor receptor (EGFR), Janus kinase (JAK), and other receptors. Furthermore, in vitro testing against three-dimensional (3D) spheroids of lung cancer (A549) and normal fibroblast cells (L929) demonstrated the cocrystal's higher anticancer potential, supported by cell viability measurements and live/dead assays. Interestingly, the cocrystal showed selectivity between cancerous and normal 3D spheroids. We found that the MP-QU cocrystal inhibited migration and invadopodia formation of cancer spheroids in a favorable 3D microenvironment.

Advanced lung organoids and lung-on-a-chip for cancer research and drug evaluation: a review

Lung cancer has become the primary cause of cancer-related deaths because of its high recurrence rate, ability to metastasise easily, and propensity to develop drug resistance. The wide-ranging heterogeneity of lung cancer subtypes increases the complexity of developing effective therapeutic interventions. Therefore, personalised diagnostic and treatment strategies are required to guide clinical practice. The advent of innovative three-dimensional (3D) culture systems such as organoid and organ-on-a-chip models provides opportunities to address these challenges and revolutionise lung cancer research and drug evaluation. In this review, we introduce the advancements in lung-related 3D culture systems, with a particular focus on lung organoids and lung-on-a-chip, and their latest contributions to lung cancer research and drug evaluation. These developments include various aspects, from authentic simulations and mechanistic enquiries into lung cancer to assessing chemotherapeutic agents and targeted therapeutic interventions. The new 3D culture system can mimic the pathological and physiological microenvironment of the lung, enabling it to supplement or replace existing two-dimensional culture models and animal experimental models and realize the potential for personalised lung cancer treatment.

Enhancing the Activity of Surface Immobilized Antimicrobial Peptides Using Thiol-Mediated Tethering to Poly(ethylene glycol)

Considering the need for versatile surface coatings that can display multiple bioactive signals and chemistries, the use of more novel surface modification methods is starting to emerge. Thiol-mediated conjugation of biomolecules is shown to be quite advantageous for such purposes due to the reactivity and chemoselectivity of thiol functional groups. Herein, the immobilization of poly(ethylene glycol) (PEG) and antimicrobial peptides (AMPs) to silica colloidal particles based on thiol-mediated conjugation techniques, along with an assessment of the antimicrobial potential of the functionalized particles against Pseudomonas aeruginosa and Staphylococcus aureus is investigated. Immobilization of PEG to thiolated Si particles is performed by either a two-step thiol-ene "photo-click" reaction or a "one-pot" thiol-maleimide type conjugation using terminal acrylate or maleimide functional groups, respectively. It is demonstrated that both immobilization methods result in a significant reduction in the number of viable bacterial cells compared to unmodified samples after the designated incubation periods with the PEG-AMP-modified colloidal suspensions. These findings provide a promising outlook for the fabrication of multifunctional surfaces based upon the tethering of PEG and AMPs to colloidal particles through thiol-mediated biocompatible chemistry, which has potential for use as implant coatings or as antibacterial formulations that can be incorporated into wound dressings to prevent or control bacterial infections.

On-chip modeling of tumor evolution: Advances, challenges and opportunities

Tumor evolution is the accumulation of various tumor cell behaviors from tumorigenesis to tumor metastasis and is regulated by the tumor microenvironment (TME). However, the mechanism of solid tumor progression has not been completely elucidated, and thus, the development of tumor therapy is still limited. Recently, Tumor chips constructed by culturing tumor cells and stromal cells on microfluidic chips have demonstrated great potential in modeling solid tumors and visualizing tumor cell behaviors to exploit tumor progression. Herein, we review the methods of developing engineered solid tumors on microfluidic chips in terms of tumor types, cell resources and patterns, the extracellular matrix and the components of the TME, and summarize the recent advances of microfluidic chips in demonstrating tumor cell behaviors, including proliferation, epithelial-to-mesenchymal transition, migration, intravasation, extravasation and immune escape of tumor cells. We also outline the combination of tumor organoids and microfluidic chips to elaborate tumor organoid-on-a-chip platforms, as well as the practical limitations that must be overcome.

Microfluidics and Organoids, the Power Couple of Developmental Biology and Oncology Studies

Organoids are an advanced cell model that hold the key to unlocking a deeper understanding of in vivo cellular processes. This model can be used in understanding organ development, disease progression, and treatment efficacy. As the scientific world embraces the model, it must also establish the best practices for cultivating organoids and utilizing them to the greatest potential in assays. Microfluidic devices are emerging as a solution to overcome the challenges of organoids and adapt assays. Unfortunately, the various applications of organoids often depend on specific features in a device. In this review, we discuss the options and considerations for features and materials depending on the application and development of the organoid.

Patient-derived organoids of lung cancer based on organoids-on-a-chip: enhancing clinical and translational applications

Lung cancer is one of the most common malignant tumors worldwide, with high morbidity and mortality due to significant individual characteristics and genetic heterogeneity. Personalized treatment is necessary to improve the overall survival rate of the patients. In recent years, the development of patient-derived organoids (PDOs) enables lung cancer diseases to be simulated in the real world, and closely reflects the pathophysiological characteristics of natural tumor occurrence and metastasis, highlighting their great potential in biomedical applications, translational medicine, and personalized treatment. However, the inherent defects of traditional organoids, such as poor stability, the tumor microenvironment with simple components and low throughput, limit their further clinical transformation and applications. In this review, we summarized the developments and applications of lung cancer PDOs and discussed the limitations of traditional PDOs in clinical transformation. Herein, we looked into the future and proposed that organoids-on-a-chip based on microfluidic technology are advantageous for personalized drug screening. In addition, combined with recent advances in lung cancer research, we explored the translational value and future development direction of organoids-on-a-chip in the precision treatment of lung cancer.

Lab-on-a-chip systems for cancer biomarker diagnosis

Lab-on-a-chip (LOC) or micro total analysis system is one of the microfluidic technologies defined as the adaptation, miniaturization, integration, and automation of analytical laboratory procedures into a single instrument or "chip". In this article, we review developments over the past five years in the application of LOC biosensors for the detection of different types of cancer. Microfluidics encompasses chemistry and biotechnology skills and has revolutionized healthcare diagnosis. Superior to traditional cell culture or animal models, microfluidic technology has made it possible to reconstruct functional units of organs on chips to study human diseases such as cancer. LOCs have found numerous biomedical applications over the past five years, including integrated bioassays, cell analysis, metabolomics, drug discovery and delivery systems, tissue and organ physiology and disease modeling, and personalized medicine. This review provides an overview of the latest developments in microfluidic-based cancer research, with pros, cons, and prospects.

Organ-on-a-Chip Platforms for Drug Screening and Delivery in Tumor Cells: A Systematic Review

Simple Summary

Cancer is one of the diseases with a high mortality rate worldwide. Of the current strategies to study new diagnostic and treating tools, organs-on-chip are quite promising regarding the achievement of more personalized medicine. In this work, 75 out of 820 of the most recent published scientific articles were selected and analyzed through a systematic process. The selected articles present the different microfluidic platforms where cell culture was introduced and was used for the evaluation of cancer treatments efficacy and/or toxicity.

Abstract

The development of cancer models that rectify the simplicity of monolayer or static cell cultures physiologic microenvironment and, at the same time, replicate the human system more accurately than animal models has been a challenge in biomedical research. Organ-on-a-chip (OoC) devices are a solution that has been explored over the last decade. The combination of microfluidics and cell culture allows the design of a dynamic microenvironment suitable for the evaluation of treatments’ efficacy and effects, closer to the response observed in patients. This systematic review sums the studies from the last decade, where OoC with cancer cell cultures were used for drug screening assays. The studies were selected from three databases and analyzed following the research guidelines for systematic reviews proposed by PRISMA. In the selected studies, several types of cancer cells were evaluated, and the majority of treatments tested were standard chemotherapeutic drugs. Some studies reported higher drug resistance of the cultures on the OoC devices than on 2D cultures, which indicates the better resemblance to in vivo conditions of the former. Several studies also included the replication of the microvasculature or the combination of different cell cultures. The presence of vasculature can influence positively or negatively the drug efficacy since it contributes to a greater diffusion of the drug and also oxygen and nutrients. Co-cultures with liver cells contributed to the evaluation of the systemic toxicity of some drugs metabolites. Nevertheless, few studies used patient cells for the drug screening assays.

The Influence of Antitumor Unsymmetrical Bisacridines on 3D Cancer Spheroids Growth and Viability

The culture of 3D spheroids is a promising tool in drug development and testing. Recently, we synthesized a new group of compounds, unsymmetrical bisacridines (UAs), which exhibit high cytotoxicity against various human cell lines and antitumor potency against several xenografts. Here, we describe the ability of four UAs—C-2028, C-2041, C-2045, and C-2053—to influence the growth of HCT116 and H460 spheres and the viability of HCT116 cells in 3D culture compared with that in 2D standard monolayer culture. Spheroids were generated using ultra-low-attachment plates. The morphology and diameters of the obtained spheroids and those treated with UAs were observed and measured under the microscope. The viability of cells exposed to UAs at different concentrations and for different incubation times in 2D and 3D cultures was assessed using 7-AAD staining. All UAs managed to significantly inhibit the growth of HCT116 and H460 spheroids. C-2045 and C-2053 caused the death of the largest population of HCT116 spheroid cells. Although C-2041 seemed to be the most effective in the 2D monolayer experiments, in 3D conditions, it turned out to be the weakest compound. The 3D spheroid culture seems to be a suitable method to examine the efficiency of new antitumor compounds, such as unsymmetrical bisacridines.

A novel design of microfluidic platform for metronomic combinatorial chemotherapy drug screening based on 3D tumor spheroid model

For treating cancer at various stages, chemotherapy drugs administered in combination provide better treatment results with lower side effects compared to single-drug therapy. However, finding the potential drug combinations has been challenging due to the large numbers of possible combinations from approved drugs and the failure of in vitro 2D well plate-based cancer models. 3D spheroid-based high-throughput microfluidic platforms recapitulate some of the important features of native tumor tissue and offer a promising alternative to evaluate the combinatory effects of the drugs. This study develops a novel polydimethylsiloxane (PDMS) based microfluidic design with a dynamic environment and strategically placed U-shaped wells for testing all seven possible combinations (three single-drug treatments, three pairwise combinations, treatment with all three drugs) of three chemotherapy drugs (Paclitaxel, Vinorelbine, and Etoposide) on lung tumor spheroids. The design of U-shaped wells has been validated with computational results. Firstly, we test all combinations of drugs on the conventional well plate in static conditions with 3D tumor spheroids. Based on static drug testing results, we show a proof-of-concept by testing the most effective drug combination on the microfluidic device in a dynamic environment. The concentration of the drugs used in combination falls below the maximum tolerated dose (MTD) of the individual drugs, towards low dose metronomic (LDM) chemotherapy. LDM combinatorial chemotherapy identified in this study can potentially lower toxicity and provide better treatment results in cancer patients. The device can be further used to culture patient-specific tumor spheroids and identify synergistic drug combinations for personalized medicine.

Rationally designed short cationic α-helical peptides with selective anticancer activity

HYPOTHESIS

Naturally derived or synthetic anticancer peptides (ACPs) have emerged as a new generation of anticancer agents with higher selectivity for cancer cells and less propensity for drug resistance. Despite the structural diversity of ACPs, α-helix is the most common secondary structure among them. Herein we report the development of a new library of short cationic amphiphilic α-helical ACPs with selective cytotoxicity against colorectal and cervical cancer.

EXPERIMENTS

The peptides had a general formula C(XXYY)₃ with C representing amino acid cysteine (providing a -SH group for molecular conjugation), X representing hydrophobic amino acids (isoleucine (I) or leucine (L)), and Y representing cationic amino acids (arginine (R) or lysine (K)). Two variants of the peptides were synthesized by adding additional Isoleucine residues to the C-terminal and replacing the N-terminal cysteine with LC-propargylglycine (LC-G) to investigate the effect of N-terminal and C-terminal variation on the anticancer activity. The structure and physicochemical properties of the peptides were determined by RP-HPLC, LC-MS and CD spectroscopy. The cytotoxicity of the peptides in different cell lines was assessed by MTT test, cell proliferation assay and mitochondrial damage assay. The mechanism of cell selectivity of the peptides was investigated by studying their interfacial behaviour at the air/water and lipid/water interface using Langmuir trough.

FINDINGS

The peptides consisting of K residues in their hydrophilic domains exhibited more selective anticancer activity whereas the peptides containing R exhibited strong toxicity in normal cells. The anticancer activity of the peptides was a function of their helical content and their hydrophobicity. Therefore, the addition of two I residues at C-terminal enhanced the anticancer activity of the peptides by increasing their hydrophobicity and their helical content. These two variants also exhibited strong anticancer activity against colorectal cancer multicellular tumour spheroids (MCTS). The higher toxicity of the peptides in cancer cells compared to normal cells was the result of higher penetration into the negatively charged cancer cell membranes, leading to higher cellular uptake, and their cytotoxic effect was mainly exerted by damaging the mitochondrial membranes leading to apoptosis. The results from this study provide a basis for rational design of new α-helical ACPs with enhanced anticancer activity and selectivity.

CpACpP: In Silico Cell-Penetrating Anticancer Peptide Prediction Using a Novel Bioinformatics Framework

Cell-penetrating anticancer peptides (Cp-ACPs) are considered promising candidates in solid tumor and hematologic cancer therapies. Current approaches for the design and discovery of Cp-ACPs trust the expensive high-throughput screenings that often give rise to multiple obstacles, including instrumentation adaptation and experimental handling. The application of machine learning (ML) tools developed for peptide activity prediction is importantly of growing interest. In this study, we applied the random forest (RF)-, support vector machine (SVM)-, and eXtreme gradient boosting (XGBoost)-based algorithms to predict the active Cp-ACPs using an experimentally validated data set. The model, CpACpP, was developed on the basis of two independent cell-penetrating peptide (CPP) and anticancer peptide (ACP) subpredictors. Various compositional and physiochemical-based features were combined or selected using the multilayered recursive feature elimination (RFE) method for both data sets. Our results showed that the ACP subclassifiers obtain a mean performance accuracy (ACC) of 0.98 with an area under curve (AUC) ≈ 0.98 vis-à-vis the CPP predictors displaying relevant values of ∼0.94 and ∼0.95 via the hybrid-based features and independent data sets, respectively. Also, the predicting evaluation of Cp-ACPs gave accuracies of ∼0.79 and 0.89 on a series of independent sequences by applying our CPP and ACP classifiers, respectively, which leaves the performance of our predictors better than the earlier reported ACPred, mACPpred, MLCPP, and CPPred-RF. The described consensus-based fusion method additionally reached an AUC of 0.94 for the prediction of Cp-ACP (http://cbb1.ut.ac.ir/CpACpP/Index).

Facile Route for 3D Printing of Transparent PETg-Based Hybrid Biomicrofluidic Devices Promoting Cell Adhesion

3D printing has emerged as a promising fabrication technique for microfluidic devices, overcoming some of the challenges associated with conventional soft lithography. Filament-based polymer extrusion (popularly known as fused deposition modeling (FDM)) is one of the most accessible 3D printing techniques available, offering a wide range of low-cost thermoplastic polymer materials for microfluidic device fabrication. However, low optical transparency is one of the significant limitations of extrusion-based microfluidic devices, rendering them unsuitable for cell culture-related biological applications. Moreover, previously reported extrusion-based devices were largely dependent on fluorescent dyes for cell imaging because of their poor transparency. First, we aim to improve the optical transparency of FDM-based microfluidic devices to enable bright-field microscopy of cells. This is achieved using (1) transparent polymer filament materials such as poly(ethylene terephthalate) glycol (PETg), (2) optimized 3D printing process parameters, and (3) a hybrid approach by integrating 3D printed microfluidic devices with cast poly(dimethylsiloxane) (PDMS) blocks. We begin by optimizing four essential 3D printing process parameters (layer height, printing speed, cooling fan speed, and extrusion flow), affecting the overall transparency of 3D printed devices. Optimized parameters produce exceptional optical transparency close to 80% in 3D printed PETg devices. Next, we demonstrate the potential of FDM-based 3D printing to fabricate transparent micromixing devices with complex planar and nonplanar channel networks. Most importantly, cells cultured on native 3D printed PETg surfaces show excellent cell attachment, spreading, and proliferation during 3 days of culture without extracellular matrix coating or surface treatment. Next, we introduce L929 cells inside hybrid PETg-PDMS biomicrofluidic devices as a proof of concept. We demonstrate that 3D printed hybrid biomicrofluidic devices promote cell adhesion, allow bright-field microscopy, and maintain high cell viability for 3 days. Finally, we demonstrate the applicability of the proposed fabrication approach for developing 3D printed microfluidic devices from other FDM-compatible transparent polymers such as polylactic acid (PLA) and poly(methyl methacrylate) (PMMA).

Indirect co-culture of lung carcinoma cells with hyperthermia-treated mesenchymal stem cells influences tumor spheroid growth in a collagen-based 3-dimensional microfluidic model

BACKGROUND

Mesenchymal stem cells (MSCs) have paradoxically been reported to exert either pro- or anti-tumor effects in vitro. Hyperthermia, in combination with chemotherapy, has tumor-inhibiting effects; however, its role, together with MSCs, so far is not well understood. Furthermore, a lot of research is conducted using conventional 2-dimensional in vitro models that do not mimic the actual tumor microenvironment.

AIM

In light of this fact, an indirect method of co-culturing human amniotic membrane-derived MSCs (AMMSCs) with collagen-encapsulated human lung carcinoma cells (A549) was performed using a 3-dimensional (3D) tumor-on-chip device.

METHODS

The conditioned medium of AMMSCs (AMMSC-CM) or heat-treated AMMSCs (heat-AMMSC-CM) was utilized to create indirect co-culture conditions. Tumor spheroid growth characterization, immunocytochemistry and cytotoxicity assays, and anti-cancer peptide (P1) screening were performed to determine the effects of the conditioned medium.

RESULTS

The A549 cells cultured inside the 3D microfluidic chip developed into multicellular tumor spheroids over five days of culture. The AMMSC-CM, contrary to previous reports claiming its tumor-inhibiting potential, led to significant proliferation of tumor spheroids. Heat-AMMSC-CM led to reductions in both spheroid diameter and cell proliferation. The medium containing the P1 peptide was found to be the least cytotoxic to tumor spheroids in co-culture compared with the monoculture and heat-co-culture groups.

CONCLUSIONS

Hyperthermia, in combination with the anticancer peptide, exhibited highest cytotoxic effects. This study highlights the growing importance of 3D microfluidic tumor models for testing stem-cell-based and other anti-cancer therapies.

Recent progress of therapeutic peptide based nanomaterials: from synthesis and self-assembly to cancer treatment

This review has described the synthesis, self-assembly and the anti-cancer application of therapeutic peptides and their conjugates, particularly polymer–peptide conjugates (PPCs).