Large-Area Arrays of Polymer-Tethered Gold Nanorods with Controllable Orientation and Their Application in Nano-Floating-Gate Memory Devices

In this work, it is reported that large-area (centimeter-scale) arrays of non-close-packed polystyrene-tethered gold nanorod (AuNR@PS) can be prepared through a liquid-liquid interfacial assembly method. Most importantly, the orientation of AuNRs in the arrays can be controlled by changing the intensity and direction of electric field applied in the solvent annealing process. The interparticle distance of AuNR can be tuned by varying the length of polymer ligands. Moreover, the AuNR@PS with short PS ligand are favorited to form orientated arrays with the assistance of electric field, while long PS ligands make the orientation of AuNRs difficult. The orientated AuNR@PS arrays are employed as the nano-floating gate of field-effect transistor memory device. Tunable charge trapping and retention characteristics in the device can be realized by electrical pulse with visible light illumination. The memory device with orientated AuNR@PS array required less illumination time (1 s) at the same onset voltage in programming operation, compared to the control device with disordered AuNR@PS array (illumination time: 3 s). Moreover, the orientated AuNR@PS array-based memory device can maintain the stored data for more than 9000 s, and exhibits stable endurance characteristic without significant degradation in 50 programming/reading/erasing/reading cycles.

Self-Assembly of DNA Homopolymers by Pathway Dependence to Evade Metastable States

A pathway-dependent strategy is proposed to assist single-stranded DNA polyadenine (poly(dA)) in evading metastable states and to achieve morphological regulation from microcapsules to microbowls by fractional n-butanol addition and emulsification (shaking) in a soft emulsion template (water-in-n-butanol). The first stage is the formation of small microcapsules by a fourth solvent addition and shaking. The second stage is the expansion of the small microcapsules initiated by the fifth solvent addition and shaking, drawing them to a new pathway to evade metastable states. Osmotic re-equilibrium and shaking are two indispensable conditions for overcoming the energy barriers. The third stage is the buckling of the expanded microcapsules and the evolution into microbowls after the evaporation of n-butanol to reach a global free energy minimum stable state. Conversely, the conventional one-time solvent addition and shaking pathway do not obtain microbowls. This kinetics pathway-dependent strategy evades metastability and shapes DNA oligonucleotides into desired structures via self-assembly.

Quantification of reagent mixing in liquid flow cells for Liquid Phase-TEM

Liquid-Phase Transmission Electron Microscopy (LP-TEM) offers the opportunity to study nanoscale dynamics of phenomena related to materials and life science in a native liquid environment and in real time. Until now, the opportunity to control/induce such dynamics by changing the chemical environment in the liquid flow cell (LFC) has rarely been exploited due to an incomplete understanding of hydrodynamic properties of LP-TEM flow systems. This manuscript introduces a method for hydrodynamic characterization of LP-TEM flow systems based on monitoring transmitted intensity while flowing a strongly electron scattering contrast agent solution. Key characteristic temporal indicators of solution replacement for various channel geometries were experimentally measured. A numerical physical model of solute transport based on realistic flow channel geometries was successfully implemented and validated against experiments. The model confirmed the impact of flow channel geometry on the importance of convective and diffusive solute transport, deduced by experiment, and could further extend understanding of hydrodynamics in LP-TEM flow systems. We emphasize that our approach can be applied to hydrodynamic characterization of any customized LP-TEM flow system. We foresee the implemented predictive model driving the future design of application-specific LP-TEM flow systems and, when combined with existing chemical reaction models, to a flourishing of the planning and interpretation of experimental observations.

Electric, magnetic, and shear field-directed assembly of inorganic nanoparticles

Ordered assemblies of inorganic nanoparticles (NPs) have shown tremendous potential for wide applications due to their unique collective properties, which differ from those of individual NPs. Various assembly methods, such as external field-directed assembly, interfacial assembly, template assembly, biomolecular recognition-mediated assembly, confined assembly, and others, have been employed to generate ordered inorganic NP assemblies with hierarchical structures. Among them, the external field-directed assembly method is particularly fascinating, as it can remotely assemble NPs into well-ordered superstructures. Moreover, external fields (e.g., electric, magnetic, and shear fields) can introduce a local and/or global field intensity gradient, resulting in an additional force on NPs to drive their rotation and/or translation. Therefore, the external field-directed assembly of NPs becomes a robust method to fabricate well-defined functional materials with the desired optical, electronic, and magnetic properties, which have various applications in catalysis, sensing, disease diagnosis, energy conversion/storage, photonics, nano-floating-gate memory, and others. In this review, the effects of an electric field, magnetic field, and shear field on the organization of inorganic NPs are highlighted. The methods for controlling the well-ordered organization of inorganic NPs at different scales and their advantages are reviewed. Finally, future challenges and perspectives in this field are discussed.

Vesicular self-assembly of copolymer-grafted nanoparticles with anisotropic shapes

Plasmonic nanovesicles show broad applications in areas such as cancer theranostics and drug delivery, but the preparation of nanovesicles from shaped nanoparticles remains challenging. This article describes the vesicular self-assembly of shaped nanoparticles, such as gold nanocubes grafted with amphiphilic block copolymers, in selective solvents. The nanocubes assembled within the vesicular membranes exhibit two distinctive packing modes, namely square-like and hexagonal packing, depending on the relative dimensions of the copolymer ligands and nanocubes. The corresponding optical properties of the plasmonic nanovesicles can be tuned by varying the length of the grafted copolymers and the size of the nanocubes. This work provides guidance for the fabrication of functional plasmonic vesicles for applications in catalysis, nanomedicines and optical devices.

Light-Programmed Bistate Colloidal Actuation Based on Photothermal Active Plasmonic Substrate

Active particles have been regarded as the key models to mimic and understand the complex systems of nature. Although chemical and field-powered active particles have received wide attentions, light-programmed actuation with long-range interaction and high throughput remains elusive. Here, we utilize photothermal active plasmonic substrate made of porous anodic aluminum oxide filled with Au nanoparticles and poly( N -isopropylacrylamide) (PNIPAM) to optically oscillate silica beads with robust reversibility. The thermal gradient generated by the laser beam incurs the phase change of PNIPAM, producing gradient of surface forces and large volume changes within the complex system. The dynamic evolution of phase change and water diffusion in PNIPAM films result in bistate locomotion of silica beads, which can be programmed by modulating the laser beam. This light-programmed bistate colloidal actuation provides promising opportunity to control and mimic the natural complex systems.

Merging Porphyrins with Gold Nanorods: Self Assembly Construct to High Fluorescent Polyelectrolyte Microcapsules

Dual probe porphyrin-gold nanorod polyelectrolyte microcapsules were developed to explore the enhancing effects of a plasmonic interface of self-assembled gold nanoparticles in the fluorescence emission from porphyrins loaded into the capsules’ core. An analysis of fluorescence lifetime imaging microscopy (FLIM) data reports a notable 10⁵–10⁶-fold increase in the maximum detected photon rates from diffraction-limited spots and an overall six-fold increase in fluorescence as averaged over the whole microcapsule area. Large emission enhancements were correlated with decreases in fluorescence lifetimes. The microcapsule’s design proved effective in achieving high fluorescent hybrids and may shed light on new possibilities for advanced materials imaging applications.

Diversified applications of self-assembled nanocluster delivery systems- A state-of-the- art review

BACKGROUND

Self-assembled nanoclusters arrange the components into an organized structure for the nanoparticulate system and also in the transportation of cellular elements for the fabrication of microelectronic devices. Nanoclusters reduce transcytosis and increase endocytosis in intestinal mucin to strengthen the retrograde pathway that helped in the delivery of actives to the Golgi apparatus.

OBJECTIVES

This review article focuses on the self-assembled nanoclusters for cellular transportation, applications of self-assembled structures in the delivery of essential elements like the use of a peptide in targeted and stimuli-responsive drug delivery systems, self-assembly of tocopherol nanoclusters that promotes vitamin E delivery across the endothelial barrier. Methods Current innovation in the self-assembly of peptides includes the formation of nanostructures like vesicles, fibers, and rod-coil in the applications of wound healing, tissue engineering, treatment of atherosclerosis, in sensing heavy metals from biological and environmental samples and advanced drug delivery.

RESULTS

Self-assembled biodegradable nanoclusters are used as biomimetic structures for synergistic effect. Improvement in the methods of preparation like the addition of a copolymer is used for temperature-triggered drug release nanoclusters.

CONCLUSION

Green synthesis of nanoclusters, nanocluster-based biosensor and artificial intelligence are the future concept in the manufacturing and the prevention of toxicity in humans.

Application of Microfluidic Systems for Breast Cancer Research

Cancer is a disease in which cells in the body grow out of control; breast cancer is the most common cancer in women in the United States. Due to early screening and advancements in therapeutic interventions, deaths from breast cancer have declined over time, although breast cancer remains the second leading cause of cancer death among women. Most deaths are due to metastasis, as cancer cells from the primary tumor in the breast form secondary tumors in remote sites in distant organs. Over many years, the basic biological mechanisms of breast cancer initiation and progression, as well as the subsequent metastatic cascade, have been studied using cell cultures and animal models. These models, although extremely useful for delineating cellular mechanisms, are poor predictors of physiological responses, primarily due to lack of proper microenvironments. In the last decade, microfluidics has emerged as a technology that could lead to a paradigm shift in breast cancer research. With the introduction of the organ-on-a-chip concept, microfluidic-based systems have been developed to reconstitute the dominant functions of several organs. These systems enable the construction of 3D cellular co-cultures mimicking in vivo tissue-level microenvironments, including that of breast cancer. Several reviews have been presented focusing on breast cancer formation, growth and metastasis, including invasion, intravasation, and extravasation. In this review, realizing that breast cancer can recur decades following post-treatment disease-free survival, we expand the discussion to account for microfluidic applications in the important areas of breast cancer detection, dormancy, and therapeutic development. It appears that, in the future, the role of microfluidics will only increase in the effort to eradicate breast cancer.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Giant Polymer Vesicles with a Latticelike Membrane

Hierarchical self-assembly offers great possibilities to mimic biological systems with finely arranged complex structures. Herein, we demonstrate the preparation and formation mechanism of an unusual giant polymer vesicle with a latticelike membrane (GVLM). This GVLM is formed by fusion-induced particle assembly (FIPA) of small vesicles that are self-assembled from poly(ethylene oxide)-block-poly[(2-(tetrahydrofuranyloxy)ethyl methacrylate)-stat-(6-(3,3-diphenylnaphthopyranyloxy)hexyl methacrylate)] [PEO₄₃-b-P(TMA₂₂-stat-NMA₄)]. Flexible TMA units with high chain mobility and relatively rigid NMA units with intrinsic π-π stacking form the hydrophobic block. These units act as "antifusion" and "profusion" components, respectively. The latticelike membrane of the final GVLM consists of hundreds of small polymer vesicles that are interconnected via multiple interactions. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) studies show that the diameter of the GVLMs is 800-1000 nm. Overall, we provide a new insight into the judicious preparation of hierarchical nanostructures via chemical synthesis and FIPA.

Vesicle Formation by the Self-Assembly of Gold Nanoparticles Covered with Fluorinated Oligo(ethylene glycol)-Terminated Ligands and Its Stability in Aqueous Solution

Water-stable gold nanoparticle vesicles (GNVs) with hollow interiors have attracted attention due to their great potential for biological applications; however, their preparation through the self-assembly approaches has been restricted due to the limited understanding of their critical mechanistic issues. In this paper, we demonstrate that a fluorinated tetra (ethylene glycol) (FTEG)-terminated tetra (ethylene glycol) (EG4), namely, FTEG-EG4, ligand can self-assemble with gold nanoparticles (5 and 10 nm) into GNVs with a hollow structure in THF due to the solvophobic feature of the ligand. Time-dependent studies showed that the GNVs with a closely packed surface derived from the incomplete and irregular GNVs, but not through the fusion of the GNV precursors. After dialysis in water, the assemblies retained vesicular structures in water, even though GNVs aggregated together, which was initiated by the hydrophobic interactions between the FTEG heads of the surface ligands on GNVs. This study provides a new insight into the design of novel small surface ligands to produce water-stable GNVs for biological applications.

Formulation of tunable size PLGA-PEG nanoparticles for drug delivery using microfluidic technology

Amphiphilic block co-polymer nanoparticles are interesting candidates for drug delivery as a result of their unique properties such as the size, modularity, biocompatibility and drug loading capacity. They can be rapidly formulated in a nanoprecipitation process based on self-assembly, resulting in kinetically locked nanostructures. The control over this step allows us to obtain nanoparticles with tailor-made properties without modification of the co-polymer building blocks. Furthermore, a reproducible and controlled formulation supports better predictability of a batch effectiveness in preclinical tests. Herein, we compared the formulation of PLGA-PEG nanoparticles using the typical manual bulk mixing and a microfluidic chip-assisted nanoprecipitation. The particle size tunability and controllability in a hydrodynamic flow focusing device was demonstrated to be greater than in the manual dropwise addition method. We also analyzed particle size and encapsulation of fluorescent compounds, using the common bulk analysis and advanced microscopy techniques: Transmission Electron Microscopy and Total Internal Reflection Microscopy, to reveal the heterogeneities occurred in the formulated nanoparticles. Finally, we performed in vitro evaluation of obtained NPs using MCF-7 cell line. Our results show how the microfluidic formulation improves the fine control over the resulting nanoparticles, without compromising any appealing property of PLGA nanoparticle. The combination of microfluidic formulation with advanced analysis methods, looking at the single particle level, can improve the understanding of the NP properties, heterogeneities and performance.

A hypoxia responsive nanoassembly for tumor specific oxygenation and enhanced sonodynamic therapy

The hypoxic tumor microenvironment (TME) and non-specific distribution of sonosensitizers are two major obstacles that limit practical applications of sonodynamic therapy (SDT) in combating tumors. Here we report a hypoxia-responsive nanovesicle (hMVs) as delivery vehicles of a sonosensitizer to enhance the efficacy of SDT via specific payload release and local oxygenation in the tumor. The nanovesicles are composed of densely packed manganese ferrite nanoparticles (MFNs) embedded in hypoxia-responsive amphiphilic polymer membranes. With δ-aminolevulinic acid (ALA) loaded in the hollow cavities, the hMVs could rapidly dissociate into discrete nanoparticles in the hypoxic TME to release the payload and induce the generation of reactive oxygen species (ROS) under ultrasound (US) radiation. Meanwhile, the released MFNs could catalytically generate O₂ to overcome the hypoxic TME and thus enhance the efficacy of SDT. After treatment, the dissociated MFNs could be readily excreted from the body via renal clearance to reduce long term toxicity. In vitro and in vivo experiments displayed effective tumor inhibition via hMVs-mediated SDT, indicating the great potential of this unique nanoplatform in effective SDT by generating sufficient ROS in deep-seated hypoxic tumors that are not readily accessible by conventional photodynamic therapy.

Quantitative Study of the Nonlinearly Enhanced Photoacoustic/Photothermal Effect by Strong LSPR-Coupled Nanoassemblies

The extensive exploration of the collective optical and thermal effects for localized surface plasmon resonance (LSPR)-coupled nanoassemblies has propelled much recent research and development in fields of photoacoustic (PA) imaging and photothermal (PT) therapy, while the rational design and proper engineering of these assemblies under quantitative guidance is still a highly challenging task. In this work, by utilizing the finite element analysis (FEA) method and taking gold nanochains as example, the authors quantitatively studied the coupling optical/thermal response of the nanoassemblies and the associated nonlinearly enhanced PA/PT effect. Results show that compared with their individuals, the strong electromagnetic/thermal coupling between the individuals of the nanoassemblies results in a several-time enhancement of the per-particle-weighted optical absorption, consequential thermal field enhancement, and initial PA pressure, resulting in nonlinearly amplified energy conversion from incident light to heat and PA waves. The dependence of the nonlinear PA/PT enhancement on the assembly chain length, the size of the individuals, the interparticle distance, and the size uniformity of the building blocks is quantitatively discussed. PA experiments on gold nanochains and gold nanospheres are performed to validate the proposition, and the experiments well silhouetted the theoretical discussion. This work paves the way for the rational construction and optimization of plasmonic nanoassemblies with improved PA/PT conversion efficiency.

Biomimicry of Cellular Motility and Communication Based on Synthetic Soft-Architectures

Cells, sophisticated membrane-bound units that contain the fundamental molecules of life, provide a precious library for inspiration and motivation for both society and academia. Scientists from various disciplines have made great endeavors toward the understanding of the cellular evolution by engineering artificial counterparts (protocells) that mimic or initiate structural or functional cellular aspects. In this regard, several works have discussed possible building blocks, designs, functions, or dynamics that can be applied to achieve this goal. Although great progress has been made, fundamental-yet complex-behaviors such as cellular communication, responsiveness to environmental cues, and motility remain a challenge, yet to be resolved. Herein, recent efforts toward utilizing soft systems for cellular mimicry are summarized-following the main outline of cellular evolution, from basic compartmentalization, and biological reactions for energy production, to motility and communicative behaviors between artificial cell communities or between artificial and natural cell communities. Finally, the current challenges and future perspectives in the field are discussed, hoping to inspire more future research and to help the further advancement of this field.

Flow-Induced Micellar Morphological Transformation in Microfluidic Chips under Nonequilibrium State: From Aggregates to Spherical Micelles

Self-assembly of block copolymers (BCPs) in microfluidic chips is a versatile yet effective route to produce micellar aggregates with various controllable sizes and morphologies. In this study, the morphological transformation of the BCP of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) assemblies from irregular aggregates to multicompartment micelles and ultimately to ordered spherical micelles is demonstrated in microfluidic chips. Our experimental and computational simulation results indicate that the transverse diffusion of solvents plays an important role in the morphological transformation of PS-b-P4VP assemblies in the confined flow condition. We find that the mixing time (t_mix) between a BCP/tetrahydrofuran (THF) solution and water affects the morphological transformation. Micellar morphologies are intended to transform from aggregates to ordered spherical structures under a relatively long mixing time (t_mix). In addition, it is observed that the size of the micelles decreases with the increase of the flow velocity ratio by tuning the hydrodynamic conditions of the flows. Moreover, by adjusting the initial polymer solution concentration, temperature, and weight fraction of the introduced homopolystyrene (hPS), which can affect the viscosity of the BCP solution, the flow diffusion in the microfluidic chip and the resulted micellar structures can also be readily adjusted. The current study provides a new flow-driven method to adjust the micellar ordered structural transformation under the nonequilibrium state.

In silico design and 3D printing of microfluidic chips for the preparation of size-controllable siRNA nanocomplexes

Small interfering RNA (siRNA) is regarded as one of the most powerful tools for the treatment of various diseases by downregulating the expression of aberrant proteins. Delivery vehicle is often necessary for getting siRNA into the cells. Nanocomplex using polyamidoamine (PAMAM) is regarded a promising approach for the delivery of siRNA. The size of siRNA nanocomplexes is a critical attribute in order to achieve high gene silencing efficiency in vivo. Microfluidics provides advantages in the preparation of siRNA nanocomplexes due to better reproducibility and a potential for more robust process control. The mixing efficiency of siRNA and PAMAM is different in microfluidics systems with different geometries, therefore, resulting in nanocomplexes with varying size attributes. In this study, hydrodynamic flow focusing microfluidic chips with different channel designs, i.e. diameters/widths, channel shapes (cylindrical/rectangular) and inter-channel spacings were optimized in silico and rapidly prototyped using 3D printing and finally, used for production of siRNA nanocomplexes. The fluid mixing inside the microfluidic chips was simulated using the finite element method (FEM) with the single-phase laminar flow interface in connection with the transport of diluted species interface. The digital design and optimization of microfluidic chips showed consistency with experimental results. It was concluded that the size of siRNA nanocomplexes can be controlled by adjusting the channel geometry of the microfluidic chips and the simulation with FEM could be used to facilitate the design and optimization of microfluidic chips in order to produce nanocomplexes with desirable attributes.

Polymer-guided assembly of inorganic nanoparticles

The self-assembly of inorganic nanoparticles is of great importance in realizing their enormous potentials for broad applications due to the advanced collective properties of nanoparticle ensembles. Various molecular ligands (e.g., small molecules, DNAs, proteins, and polymers) have been used to assist the organization of inorganic nanoparticles into functional structures at different hierarchical levels. Among others, polymers are particularly attractive for use in nanoparticle assembly, because of the complex architectures and rich functionalities of assembled structures enabled by polymers. Polymer-guided assembly of nanoparticles has emerged as a powerful route to fabricate functional materials with desired mechanical, optical, electronic or magnetic properties for a broad range of applications such as sensing, nanomedicine, catalysis, energy storage/conversion, data storage, electronics and photonics. In this review article, we summarize recent advances in the polymer-guided self-assembly of inorganic nanoparticles in both bulk thin films and solution, with an emphasis on the role of polymers in the assembly process and functions of resulting nanostructures. Precise control over the location/arrangement, interparticle interaction, and packing of inorganic nanoparticles at various scales are highlighted.

Selectively Permeable Double Emulsions

Natural organisms are made of different types of microcompartments, many of which are enclosed by cell membranes. For these organisms to display a proper function, the microcompartments must be selectively permeable. For example, cell membranes are typically permeable toward small, uncharged molecules such as water, selected nutrients, and cell signaling molecules, but impermeable toward many larger biomolecules. Here, it is reported for the first time dynamic compartments, namely surfactant-stabilized double emulsions, that display selective and tunable permeability. Selective permeability is imparted to double emulsions by stabilizing them with catechol-functionalized surfactants that transport molecules across the oil shell of double emulsions only if they electrostatically or hydrophobically attract encapsulants. These double emulsions are employed as semipermeable picoliter-sized vessels to controllably perform complexation reactions inside picoliter-sized aqueous cores. This thus far unmet level of control over the transport of reagents across oil phases opens up new possibilities to use double emulsion drops as dynamic and selectively permeable microcompartments to initiate and maintain chemical and biochemical reactions in picoliter-sized cell-mimetic compartments.

Self-assembly of colloids based on microfluidics

Self-assembly of colloids provides a powerful way for the construction of complex multi-scale materials. Microfluidic techniques possess great potential to precisely control the assembly of micro- and nano-scale building blocks via the rational design of various microfluidic environments. In this review, we first discuss the self-assembly of colloids without templates by using the laminar microfluidic technique. The self-assembly of colloids based on a droplet as a template was subsequently summarized and discussed via droplet microfluidic technique. Moreover, the evaporation-driven self-assembly of colloids in microfluidic channels has been discussed and analysed. Finally, the representative applications in this field have been pointed out. The aim of this review is to summarize the state-of-art on the self-assembly of colloids based on various microfluidic techniques, exhibit their representative applications, and point out the current challenges in this field, hoping to inspire and guide future work.

3D Micromachined Polyimide Mixing Devices for in Situ X-ray Imaging of Solution-Based Block Copolymer Phase Transitions

Advances in modern interface- and material sciences often rely on the understanding of a system's structure-function relationship. Designing reproducible experiments that yield in situ time-resolved structural information at fast time scales is therefore of great interest, e.g., for better understanding the early stages of self-assembly or other phase transitions. However, it can be challenging to accurately control experimental conditions, especially when samples are only available in small amounts, prone to agglomeration, or if X-ray compatibility is required. We address these challenges by presenting a microfluidic chip for triggering dynamics via rapid diffusive mixing for in situ time-resolved X-ray investigations. This polyimide/Kapton-only-based device can be used to study the structural dynamics and phase transitions of a wide range of colloidal and soft matter samples down to millisecond time scales. The novel multiangle laser ablation three-dimensional (3D) microstructuring approach combines, for the first time, the highly desirable characteristics of Kapton (high X-ray stability with low background, organic solvent compatibility) with a 3D flow-focusing geometry that minimizes mixing dispersion and wall agglomeration. As a model system, to demonstrate the performance of these 3D Kapton microfluidic devices, we selected the non-solvent-induced self-assembly of biocompatible and amphiphilic diblock copolymers. We then followed their structural evolution in situ at millisecond time scales using on-the-chip time-resolved small-angle X-ray scattering under continuous-flow conditions. Combined with complementary results from 3D finite-element method computational fluid dynamics simulations, we find that the nonsolvent mixing is mostly complete within a few tens of milliseconds, which triggers initial spherical micelle formation, while structural transitions into micelle lattices and their deswelling only occur on the hundreds of milliseconds to second time scale. These results could have an important implication for the design and formulation of amphiphilic polymer nanoparticles for industrial applications and their use as drug-delivery systems in medicine.

Time-Resolved Analysis of the Structural Dynamics of Assembling Gold Nanoparticles

The hydrophobic collapse is a structural transition of grafted polymer chains in a poor solvent. Although such a transition seems an intrinsic event during clustering of polymer-stabilized nanoparticles in the liquid phase, it has not been resolved in real time. In this work, we implemented a microfluidic 3D-flow-focusing mixing reactor equipped with real-time analytics, small-angle X-ray scattering (SAXS), and UV-vis-NIR spectroscopy to study the early stage of cluster formation for polystyrene-stabilized gold nanoparticles. The polymer shell dynamics obtained by in situ SAXS analysis and numerical simulation of the solvent composition allowed us to map the interaction energy between the particles at early state of solvent mixing, 30 ms behind the crossing point. We found that the rate of hydrophobic collapse depends on water concentration, ranging between 100 and 500 nm/s. Importantly, we confirmed that the polymer shell collapses prior to the commencement of clustering.

Microscale droplets covered by amphiphilic gold nanoparticles with various ligand ratios and concentrations

We describe a simple and reliable route for forming microscale droplets covered with amphiphilic gold nanoparticles (AuNPs) functionalized with mixed hydrophilic and hydrophobic ligands on the AuNP surface. When an aqueous solution of amphiphilic AuNPs was mixed with hexane, the hexane (or water) droplets covered with amphiphilic AuNPs in the water (or hexane) phase were created, in which amphiphilic AuNPs in water phase migrated to the hexane-water interface. The extent of AuNP migration to the interface could be tuned by the ratio of the hydrophobic to hydrophilic ligands on the AuNP surface and the overall concentration of AuNPs. Importantly, the extent of the AuNP migration to the interface depending on the AuNP concentration followed the Langmuir isotherm model well. The equilibrium constant and maximum uptake of AuNPs at the interface were estimated using the Langmuir isotherm model. To the best of our knowledge, this is the first report of the equilibrium constant determination of amphiphilic AuNPs at the liquid-liquid interface. Based on the maximum uptake of AuNPs at the hexane-water interface, we demonstrated that the AuNPs could be closely packed at the interface.

Self-Assembly of Polymer-Coated Plasmonic Nanocrystals: From Synthetic Approaches to Practical Applications

Self-assembly of plasmonic nanocrystals (PNCs) and polymers provides access to a variety of functionalized metallic-polymer building blocks and higher-order hybrid plasmonic assemblies, and thus is of considerable fundamental and practical interest. The hybrid assemblies often not only inherit individual characteristics of polymers and PNCs but also exhibit distinct photophysical and catalytic properties compared to that of a single PNC building block. The tailorable plasmonic coupling between PNCs within assemblies enables the precise control over localized surface plasmon resonance, which subsequently affords a series of light-driven or photo-activated applications, such as surface-enhanced Raman scattering detection, photoacoustic imaging, photothermal therapy, and photodynamic therapy. In this review, the synthetic strategies of a library of PNC-polymer hybrid building blocks and corresponding assemblies are summarized along with the mechanisms of polymer-assisted self-assembly of PNCs and the concepts for bridging the intrinsic properties of PNC-polymer assemblies to widespread practical applications.

Plasmonic microgels of Au nanorods: Self-assembly and applications in chemophotothermo-synergistic cancer therapy

Plasmonic microgels (PMgels) of the self-assembled gold nanorods (Au NRs) with side-by-side piles in ionic liquid microgels were prepared. Transmission electron microscopy (TEM) images revealed unique self-growth and self-arrangement of Au NRs in the microgel systems. The fabrication of PMgels occurs through co-assembling Au NRs and an ionic liquid microgel system, therefore differs from the fabrication of conventional plasmonic hybrid nanocomposites. These PMgels showed strong absorption in the near-infrared window and enhanced photothermal conversion efficiency, up to 52.8%, compared to the Au NRs (22%) as a result of the ordering and dense packing of Au NRs in the microgels. When the PMgels were exposed to a near-IR laser, the doxorubicin hydrochloride (Dox) released from PMgels and the resulting thermal effect can immensely inhibit tumor growth both in vitro and in vivo. The tests demonstrated that no tumor metastasis occurred. This platform of the PMgels with the laser-controlled delivery system could provide chemo-photothermal synergistic therapy for a wide spectrum of diseases.

Size-Defined Cracked Vesicle Formation via Self-Assembly of Gold Nanoparticles Covered with Carboxylic Acid-Terminated Surface Ligands

The self-assembly of gold nanoparticles (GNPs) into a defined structure, particularly hollow capsule structures, provides great potential for applications in materials science and medicine. However, the complexity of the parameters for the preparation of those structures through self-assembly has limited access to critical mechanistic questions. With this in mind, we have studied GNP vesicle (GNV) formation through self-assembly by the surface modification of GNPs with low-molecular-weight ligands. Here, we successfully prepared GNVs composed of GNPs with a diameter of 30 nm by surface modification with carboxylic acid-terminated fluorinated oligo(ethylene glycol) ligands (CFLs). As the carboxylic acid has two states (protonated and deprotonated), the balance of the attraction and repulsion between GNPs covered with CFLs is tunable. Sodium carboxylate-terminated fluorinated oligo(ethylene glycol) ligands (SCFLs) provided smaller GNVs than did CFLs at 0.8 × 10¹¹ NPs/mL. Time-course study revealed that CFL-covered GNPs quickly form small aggregates and gradually grow to larger GNVs (ca. 200 nm), but no gradual growth was observed for SCFL-covered GNPs. This result indicated that the electrostatic repulsion inhibits fusion of the small GNVs. The size of the GNVs formed with the aid of CFLs was independent of the initial GNP concentration, but the extinction spectra were concentration-dependent. Electron microscopy imaging and simulations supported the defect formation in the assemblies. These results provided new insights into the vesicle formation mechanism.

Polymer Brushes: Efficient Synthesis and Applications

Polymer brushes are special macromolecular structures with polymer chains densely tethered to another polymer chain (one-dimensional, 1D) or the surface of a planar (two-dimensional, 2D), spherical or cylindrical (three-dimensional, 3D) solid via a stable covalent or noncovalent bond linkage. In comparison with the corresponding linear counterpart with similar molecular composition, one-dimension polymer brushes have some fascinating properties including wormlike conformation, compact molecular dimension, and notable chain end effects due to their compact and confined densely grafted structure. The introduction of polymer chains onto the surface of planar and spherical or cylindrical matrix will not only significantly change the surface-related properties of the matrix but also endows the obtained hybrid polymer brushes with new functionalities. Thus, polymer brushes are of great interest in the fields of polymer and material science due to their broad applications, such as catalysis, nanolithography, biomineralization, drug delivery, medical diagnosis, optoelectronics, and so on. Although a variety of 1D, 2D, and 3D polymer brushes have been prepared with the advent of living/controlled polymerization, the development of more efficient and facile synthetic protocols that permit access to polymer brushes with precisely controlled composition, structure, and functionality still represents a key contemporary challenge. In this Account, we summarize our recent efforts on the development of efficient methods to prepare 1D, 2D, and 3D polymer brushes and exploration of their potential applications in drug delivery, antifouling coating, catalysis, and lithium-ion batteries and also highlight related achievements by other groups. First, we briefly introduce the precedent examples of efficient synthesis of polymer brushes with different structures and functionalities by the combination of monomer design with living/controlled polymerization. Given the excellent tolerance and use of the same catalytic system without any mutual interference of ATRP and Cu-catalyzed alkyne-azide cyclization (CuAAC) click reaction, a versatile and efficient platform for precise synthesis of complex asymmetric (Janus-type) 1D polymer brushes was developed on the basis of the "trifunctional monomer" strategy without polymeric functionality transformation. Subsequently, a noncovalent strategy based on crystallization-driven self assembly to prepare well-defined polymer brushes with precise control over their composition and dimensions is described. Notably, the crystallization-driven self assembly can be treated as a living/controlled polymerization of "polymeric monomer" with a special building segment for crystallization, which allows for preparing linear polymer brushes with length as high as tens of micrometers. Moreover, the properties and related applications of polymer brushes as interesting building blocks for constructing hierarchical nanostructures, efficient drug deliver carriers, antifouling films, and lithium-ion batteries are addressed by some typical examples. These advancements in this field will provide a new avenue for obtaining fascinating polymer-brush-based functional materials.

Structure and behaviour of vesicles in the presence of colloidal particles

This review highlights recent studies that investigate the structural changes and behaviour of synthetic vesicles when they are exposed to colloidal particles. We will show examples to demonstrate the power of combining particles and vesicles in generating exciting supracolloidal structures. These suprastructures have a wide range of often responsive behaviours that take advantage of both the mechanical and morphological support provided by the vesicles and the associated particles with preset functionality. This review includes applications spanning a variety of disciplines, including chemistry, biology, physics and medicine.

Self-Assembly-Mediated Release of Peptide Nanoparticles through Jets Across Microdroplet Interfaces

The release of nanoscale structures from microcapsules, triggered by changes in the capsule in response to external stimuli, has significant potential for active component delivery. Here, we describe an orthogonal strategy for controlling molecular species' release across oil/water interfaces by modulating their intrinsic self-assembly state. We show that although the soluble peptide Boc-FF can be stably encapsulated for days, its self-assembly into nanostructures triggers jet-like release within seconds. Moreover, we exploit this self-assembly-mediated release to deliver other molecular species that are transported as cargo. These results demonstrate the role of self-assembly in modulating the transport of peptides across interfaces.

Microfluidics for Cancer Nanomedicine: From Fabrication to Evaluation

Self-assembled drug delivery systems (sDDSs), made from nanocarriers and drugs, are one of the major types of nanomedicines, many of which are in clinical use, under preclinical investigation, or in clinical trials. One of the hurdles of this type of nanomedicine in real applications is the inherent complexity of their fabrication processes, which generally lack precise control over the sDDS structures and the batch-to-batch reproducibility. Furthermore, the classic 2D in vitro cell model, monolayer cell culture, has been used to evaluate sDDSs. However, 2D cell culture cannot adequately replicate in vivo tissue-level structures and their highly complex dynamic 3D environments, nor can it simulate their functions. Thus, evaluations using 2D cell culture often cannot correctly correlate with sDDS behaviors and effects in humans. Microfluidic technology offers novel solutions to overcome these problems and facilitates studying the structure-performance relationships for sDDS developments. In this Review, recent advances in microfluidics for 1) fabrication of sDDSs with well-defined physicochemical properties, such as size, shape, rigidity, and drug-loading efficiency, and 2) fabrication of 3D-cell cultures as "tissue/organ-on-a-chip" platforms for evaluations of sDDS biological performance are in focus.

Nanocomplexes of Photolabile Polyelectrolyte and Upconversion Nanoparticles for Near-Infrared Light-Triggered Payload Release

A new approach to encapsulating charged cargo molecules into a nanovector and subsequently using near-infrared (NIR) light to trigger the release is demonstrated. NIR light-responsive nanovector was prepared through electrostatic interaction-driven complexation between negatively charged silica-coated upconversion nanoparticles (UCNP@silica, 87 nm hydrodynamic diameter, polydispersity index ∼0.05) and a positively charged UV-labile polyelectrolyte bearing pendants of poly(ethylene glycol) and o-nitrobenzyl side groups; whereas charged fluorescein (FLU) was loaded through a co-complexation process. By controlling the amount of polyelectrolyte, UCNP@silica can be covered by the polymer, whereas remaining dispersed in aqueous solution. Under 980 nm laser excitation, UV light emitted by UCNP is absorbed by photolytic side groups within polyelectrolyte, which results in cleavage of o-nitrobenzyl groups and formation of carboxylic acid groups. Such NIR light-induced partial reversal of positive charge to negative charge on the polyelectrolyte layer disrupts the equilibrium among UCNP@silica, polyelectrolyte, and FLU and, consequently, leads to release of FLU molecules.

Generation of Well-Defined Micro/Nanoparticles via Advanced Manufacturing Techniques for Therapeutic Delivery

Micro/nanoparticles have great potentials in biomedical applications, especially for drug delivery. Existing studies identified that major micro/nanoparticle features including size, shape, surface property and component materials play vital roles in their in vitro and in vivo applications. However, a demanding challenge is that most conventional particle synthesis techniques such as emulsion can only generate micro/nanoparticles with a very limited number of shapes (i.e., spherical or rod shapes) and have very loose control in terms of particle sizes. We reviewed the advanced manufacturing techniques for producing micro/nanoparticles with precisely defined characteristics, emphasizing the use of these well-controlled micro/nanoparticles for drug delivery applications. Additionally, to illustrate the vital roles of particle features in therapeutic delivery, we also discussed how the above-mentioned micro/nanoparticle features impact in vitro and in vivo applications. Through this review, we highlighted the unique opportunities in generating controllable particles via advanced manufacturing techniques and the great potential of using these micro/nanoparticles for therapeutic delivery.

Cooperative Assembly of Magneto-Nanovesicles with Tunable Wall Thickness and Permeability for MRI-Guided Drug Delivery

This article describes the fabrication of nanosized magneto-vesicles (MVs) comprising tunable layers of densely packed superparamagnetic iron oxide nanoparticles (SPIONs) in membranes via cooperative assembly of polymer-tethered SPIONs and free poly(styrene)- b-poly(acrylic acid) (PS- b-PAA). The membrane thickness of MVs could be well controlled from 9.8 to 93.2 nm by varying the weight ratio of PS- b-PAA to SPIONs. The increase in membrane thickness was accompanied by the transition from monolayer MVs, to double-layered MVs and to multilayered MVs (MuMVs). This can be attributed to the variation in the hydrophobic/hydrophilic balance of polymer-grafted SPIONs upon the insertion and binding of PS- b-PAA onto the surface of nanoparticles. Therapeutic agents can be efficiently encapsulated in the hollow cavity of MVs and the release of payload can be tuned by varying the membrane thickness of nanovesicles. Due to the high packing density of SPIONs, the MuMVs showed the highest magnetization and transverse relaxivity rate ( r₂) in magnetic resonance imaging (MRI) among these MVs and individual SPIONs. Upon intravenous injection, doxorubicin-loaded MuMVs conjugated with RGD peptides could be effectively enriched at tumor sites due to synergetic effect of magnetic and active targeting. As a result, they exhibited drastically enhanced signal in MRI, improved tumor delivery efficiency of drugs as well as enhanced antitumor efficacy, compared with groups with only magnetic or active targeting strategy. The unique nanoplatform may find applications in effective disease control by delivering imaging and therapy to organs/tissues that are not readily accessible by conventional delivery vehicles.

Current developments and applications of microfluidic technology toward clinical translation of nanomedicines

Nanoparticulate drug delivery systems hold great potential for the therapy of many diseases, especially cancer. However, the translation of nanoparticulate drug delivery systems from academic research to industrial and clinical practice has been slow. This slow translation can be ascribed to the high batch-to-batch variations and insufficient production rate of the conventional preparation methods, and the lack of technologies for rapid screening of nanoparticulate drug delivery systems with high correlation to the in vivo tests. These issues can be addressed by the microfluidic technologies. For example, microfluidics can not only produce nanoparticles in a well-controlled, reproducible, and high-throughput manner, but also create 3D environments with continuous flow to mimic the physiological and/or pathological processes. This review provides an overview of the microfluidic devices developed to prepare nanoparticulate drug delivery systems, including drug nanosuspensions, polymer nanoparticles, polyplexes, structured nanoparticles and theranostic nanoparticles. We also highlight the recent advances of microfluidic systems in fabricating the increasingly realistic models of the in vivo milieu for rapid screening of nanoparticles. Overall, the microfluidic technologies offer a promise approach to accelerate the clinical translation of nanoparticulate drug delivery systems.

Self-assembly of noble metal nanoparticles into sub-100 nm colloidosomes with collective optical and catalytic properties

Self-assembly at the nanoscale represents a powerful tool for creating materials with new structures and intriguing collective properties. Here, we report a novel strategy to synthesize nanoscale colloidosomes of noble metals by assembling primary metal nanoparticles at the interface of emulsion droplets formed by their capping agent. This strategy produces noble metal colloidosomes of unprecedentedly small sizes (<100 nm) in high yield and uniformity, which is highly desirable for practical applications. In addition, it enables the high tunability of the composition, producing a diversity of monometallic and bimetallic alloy colloidosomes. The colloidosomes exhibit interesting collective properties that are different from those of individual colloidal nanoparticles. Specifically, we demonstrate Au colloidosomes with well-controlled interparticle plasmon coupling and Au-Pd alloy colloidosomes with superior electrocatalytic performance, both thanks to the special structural features that arise from the assembly. We believe this strategy provides a general platform for producing a rich class of miniature colloidosomes that may have fascinating collective properties for a broad range of applications.

Self-Assembly of Semiconducting-Plasmonic Gold Nanoparticles with Enhanced Optical Property for Photoacoustic Imaging and Photothermal Therapy

Although various noble metal and semiconducting molecules have been developed as photoacoustic (PA) agents, the use of semiconducting polymer-metal nanoparticle hybrid materials to enhance PA signal has not been explored. A novel semiconducting-plasmonic nanovesicle was fabricated by self-assembly of semiconducting poly(perylene diimide) (PPDI) and poly(ethylene glycol (PEG) tethered gold nanoparticles (Au@PPDI/PEG). A highly localized and strongly enhanced electromagnetic (EM) field is distributed between adjacent gold nanoparticles in the vesicular shell, where the absorbing collapsed PPDI is present. Significantly, the EM field in turn enhances the light absorption efficiency of PPDI, leading to a much greater photothermal effect and a stronger photoacoustic signal compared to PDI nanoparticle or gold nanovesicle alone. The optical property of the hybrid vesicle can be further tailored by controlling the ratio of PPDI and gold nanoparticle as well as the adjustable interparticle distance of gold nanoparticles localized in the vesicular shell. In vivo imaging and therapeutic evaluation demonstrated that the hybrid vesicle is an excellent probe for cancer theranostics.

Microfluidic-assisted fabrication of carriers for controlled drug delivery

The microfluidic technique has brought unique opportunities toward the full control over the production processes for drug delivery carriers, owing to the miniaturisation of the fluidic environment. In comparison to the conventional batch methods, the microfluidic setup provides a range of advantages, including the improved controllability of material characteristics, as well as the precisely controlled release profiles of payloads. This review gives an overview of different fluidic principles used in the literature to produce either polymeric microparticles or nanoparticles, focusing on the materials that could have an impact on drug delivery. We also discuss the relations between the particle size and size distribution of the obtained carriers, and the design and configuration of the microfluidic setups. Overall, the use of microfluidic technologies brings exciting opportunities to expand the body of knowledge in the field of controlled drug delivery and great potential to clinical translation of drug delivery systems.