Towards Long-Term Photostability of Nickel Hydroxide/BiVO4 Photoanodes for Oxygen Evolution Catalysts via In Situ Catalyst Tuning

Ultrathin-FeOOH-coated MnO2 nanozyme with enhanced catalase-like and oxidase-like activities for photoelectrochemical and colorimetric detection of organophosphorus pesticides

Herein, we develop a dual-mode biosensor for photoelectrochemical and colorimetric detection of organophosphate pesticides (OPPs) based on ultrathin-FeOOH-coated MnO2 (MO@FHO) nanozyme. In this biosensor, OPPs can inhibit the alkaline phosphatase (ALP) activity and hinder the dephosphorylation of l-ascorbic acid-2-phosphate, preventing the decomposition of MO@FHO nanozyme and inducing both a photoelectrochemical (PEC) signal and the colorimetric change. The MO@FHO nanozyme not only possesses an enhanced catalase-like activity to degrade H2O2 for the generation of an improved cathodic photocurrent, but also exhibits an excellent oxidase-like activity to oxidize 3,3,5,5-tetramethylbenzidine with high catalytic efficiency. This biosensor displays a detection limit of 50 pmol/L for the PEC mode and a detection limit of 0.8 nmol/L for the colorimetric mode. Moreover, this biosensor exhibits excellent performance in complex biological matrices, and the smartphone-based visual sensing platform facilitates rapid and sensitive detection of OPPs, holding promising applications in food safety monitoring, and on-site detection.

Enhancing Iron(III) Oxide Photoelectrochemical Water Splitting Performance Using Defect Engineering and Heterostructure Construction

Fe2O3 is a promising semiconductor for photoelectrochemical (PEC) water decomposition. However, severe charge recombination problems limit its applications. In this study, a F-Fe2O3-x/MoS2 nanorod array photoanode was designed and prepared to facilitate charge separation. Detailed characterization and experimental results showed that F doping in Fe2O3 regulated the electronic structure to improve the conductivity of Fe2O3 and induced abundant oxygen vacancies to increase the carrier concentration and promote charge separation in bulk. In addition, the internal electric field between F-Fe2O3-x and MoS2 facilitated the qualitative transfer of the photogenerated charge, thus inhibiting their recombination. The synergistic effect between the oxygen vacancy and F-Fe2O3-x/MoS2 heterojunction significantly enhanced the PEC performance of Fe2O3. This study provides a universal strategy for designing other photoanode materials with high-efficiency charge separation.

Constructing Sequential Type II Heterojunction CQDs/Bi2S3/TiNbO Photoanode with Superior Charge Transfer Capability Toward Stable Photoelectrochemical Water Splitting

Efficient charge transfer and light-trapping units are pivotal prerequisites in the realm of Ti-based photoanode photoelectrochemical (PEC) water splitting. In this work, we successfully synthesized a ternary carbon quantum dots/Bi2S3 quantum dots/Nb-doped TiO2 nanotube arrays (CQDs/Bi2S3/TiNbO) composite photoanode for PEC water splitting. CQDs/Bi2S3/TiNbO composite photoanode exhibited a considerably elevated photocurrent density of 8.80 mA cm-2 at 1.23 V vs the reversible hydrogen electrode, which was 20.00 times better than that of TiO2 (0.44 mA cm-2). Furthermore, the CQDs/Bi2S3/TiNbO composite photoanode attested to exceptional stability, maintaining 92.54% of its initial current after 5 h of stability measurement. Nb-doping boosted the electrical conductivity, facilitating charge transfer at the solid-liquid interface. Moderate amounts of Bi2S3 quantum dots (QDs) and CQDs deposited on TiNbO provided abundant active sites for the electrolyte-photoanode interaction. Simultaneously, Bi2S3 QDs and CQDs synergistically functioned as light-trapping units to broaden the light absorption range from 396 to 530 nm, stimulating increased carrier generation within the composite photoanode. In comparison with pristine TiO, CQDs/Bi2S3/TiNbO photoanodes possessed a superior ability to promote interfacial reactions. This study may provide a strategy for developing high-performance Ti-based photoanodes with efficient charge transfer and light trapping units for highly driving solar-to-hydrogen conversion.

Enhanced Charge Carrier Dynamics on Sb2 Se3 Photocathodes for Efficient Photoelectrochemical Nitrate Reduction to Ammonia

Ammonia (NH3 ) is recognized as a transportable carrier for renewable energy fuels. Photoelectrochemical nitrate reduction reaction (PEC NO3 RR) offers a sustainable solution for nitrate-rich wastewater treatment by directly converting solar energy to ammonia. In this study, we demonstrate the highly selective PEC ammonia production from NO3 RR by constructing a CoCu/TiO2 /Sb2 Se3 photocathode. The constructed CoCu/TiO2 /Sb2 Se3 photocathode achieves an ammonia Faraday efficiency (FE) of 88.01 % at -0.2 VRHE and an ammonia yield as high as 15.91 μmol h-1  cm-2 at -0.3 VRHE with an excellent onset potential of 0.43 VRHE . Dynamics experiments and theoretical calculations have demonstrated that the CoCu/TiO2 /Sb2 Se3 photocathode possesses high light absorption capacity, excellent carrier transfer capability, and high charge separation and transfer efficiencies. The photocathode can effectively adsorb the reactant NO3 - and intermediate, and the CoCu co-catalyst increases the maximum Gibbs free energy difference between NO3 RR and HER. Meanwhile, the Co species enhances the spin density of Cu, and increases the density of states near the Fermi level in pdos, which results in a high PEC NO3 RR activity on CoCu/TiO2 /Sb2 Se3 . This work provides a new avenue for the feasibility of efficient PEC ammonia synthesis from nitrate-rich wastewater.

Dual Shield: Bifurcated Coating Analysis of Multilayered WO3/BiVO4/TiO2/NiOOH Photoanodes for Sustainable Solar-to-Hydrogen Generation from Challenging Waters

The heterostructure WO3/BiVO4-based photoanodes have garnered significant interest for photoelectrochemical (PEC) solar-driven water splitting to produce hydrogen. However, challenges such as inadequate charge separation and photocorrosion significantly hinder their performance, limiting overall solar-to-hydrogen conversion efficiency. The incorporation of cocatalysts has shown promise in improving charge separation at the photoanode, yet mitigating photocorrosion remains a formidable challenge. Amorphous metal oxide-based passivation layers offer a potential solution to safeguard semiconductor catalysts. We examine the structural, surface morphological, and optical properties of two-step-integrated sputter and spray-coated TiO2 thin films and their integration onto WO3/BiVO4, both with and without NiOOH cocatalyst deposition. The J-V experiments reveal that the NiOOH cocatalyst enhances the photocurrent density of the WO3/BiVO4 photoanode in water splitting reactions from 2.81 to 3.87 mA/cm2. However, during prolonged operation, the photocurrent density degrades by 52%. In contrast, integrated sputter and spray-coated TiO2 passivation layer-coated WO3/BiVO4/NiOOH samples demonstrate a ∼88% enhancement in photocurrent density (5.3 mA/cm2) with minimal degradation, emphasizing the importance of a strategic coating protocol to sustain photocurrent generation. We further explore the feasibility of using natural mine wastewater as an electrolyte feedstock in PEC generation. Two-compartment PEC cells, utilizing both fresh water and metal mine wastewater feedstocks exhibit 66.6 and 74.2 μmol/h cm2 hydrogen generation, respectively. Intriguingly, the recovery of zinc (Zn2+) heavy metals on the cathode surface in the mine wastewater electrolyte is confirmed through surface morphology and elemental analysis. This work underscores the significance of passivation layer and cocatalyst coating methodologies in a sequential order to enhance charge separation and protect the photoanode from photocorrosion, contributing to sustainable hydrogen generation. Additionally, it suggests the potential of utilizing wastewater in electrolyzers as an alternative to freshwater resources.

Unveiling the Influence of Sulfur Doping on Photoelectrochemical Performance in BiVO4/FeOOH Heterostructures

BiVO4 is a promising photoanode for photoelectrochemical (PEC) water splitting but suffers from high charge carrier recombination and sluggish surface water oxidation kinetics that limit its efficiency. In this work, a model of sulfur-incorporated FeOOH cocatalyst-loaded BiVO4 was constructed. The composite photoanode (BiVO4/S-FeOOH) demonstrates an enhanced photocurrent density of 3.58 mA cm-2, which is 3.7 times higher than that of the pristine BiVO4 photoanode. However, the current explanations for the generation of enhanced photocurrent signals through the incorporation of elements and cocatalyst loading remain unclear and require further in-depth research. In this work, the hole transfer kinetics were investigated by using a scanning photoelectrochemical microscope (SPECM). The results suggest that the incorporation of sulfur can effectively improve the charge transfer capacity of FeOOH. Moreover, the oxygen evolution reaction model provides evidence that S-doping can induce a "fast" surface catalytic reaction at the cocatalyst/solution interface. The work not only presents a promising approach for designing a highly efficient photoanode but also offers valuable insights into the role of element doping in the PEC water-splitting system.

Electron confinement promoted the electric double layer effect of BiOI/β-Bi2O3 in photocatalytic water splitting

In the realm of photocatalysis, understanding the interface issues (solid/solid and solid/liquid) inherent in heterojunction at the atomic level is the ultimate for engineering an efficient photocatalyst. Herein, an electrophoretic deposition technique is adopted to synthesize BiOI/β-Bi2O3 heterojunction, exhibiting superior photocatalytic activity and stability in H2 evolution (91.5 μmol g-1 h-1) and H2O2 production (11.3 mg L-1 h-1). Combined with the experimental and computational results, a lower free energy of hydrogen evolution reaction (252.4 meV) has been observed contrast to BiOI and β-Bi2O3 samples. A carrier transfer process of like S-scheme heterojunction is proposed based on density of states (DOS) and carrier distribution calculations. The theoretical calculations illustrate the transition dipole moment, migration and accumulation of carrier in BiOI/β-Bi2O3 heterojunction. Subsequent ab initio molecular dynamics (AIMD) results of solid/liquid interface systems (BiOI/β-Bi2O3/H2O and β-Bi2O3/H2O) unravel the interface H2O (solvent) behaviors. The local aggregation of photo-generated electrons in BiOI/β-Bi2O3/H2O leads to a large potential drop, high proton migration rate and the steady electric double layer (EDL) structure compared to the β-Bi2O3/H2O, which facilitates the occurrence of photocatalytic reactions in solution. In addition to offering new insights into the hydrogen evolution and proton transfer in the EDL model and the association between the heterojunction effect and EDL structure, this work also introduces a novel design strategy for Bi-based heterojunctions.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Superhydrophilic CoFe Dispersion of Hydrogel Electrocatalysts for Quasi-Solid-State Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy to convert solar energy to hydrogen. However, the lifetime of PEC devices is restricted by the photocorrosion of semiconductors and the instability of co-catalysts. Herein, we report a feasible in situ inherent cross-linking method for stabilizing semiconductors that uses a CoFe-dispersed polyacrylamide (PAM) hydrogel as a transparent protector. The CoFe-PAM hydrogel protected BiVO4 (BVO) photoanode reached a photocurrent density of 5.7 mA cm-2 at 1.23 VRHE under AM 1.5G illumination with good stability. The PAM hydrogel network improved the loading of Fe sites while enabling the retention of more CoFe co-catalysts and increasing the electron density of the reaction active sites, further improving the PEC performance and stability. More importantly, by tuning the polymerization network, we pioneer the use of quasi-solid-state electrolytes in photoelectrochemistry, where the high concentration of ionic solvent in the PAM hydrogel ensures effective charge transport and good water storage owing to the hydrophilic and porous structure of the hydrogel. This work expands the scope of PEC research by providing a class of three-dimensional hydrogel electrocatalysts and quasi-solid-state electrolytes with huge extension potential, and the versatility of these quasi-solid-state electrolytes can be employed for other semiconductors.

Cobalt Oxide-Coated Single Crystalline Bismuth Vanadate Photoanodes for Efficient Photoelectrochemical Chlorine Generation

Bismuth vanadate (BiVO4) is an outstanding photoanode material for photoelectrochemical water splitting. In this work, a series of single crystalline BiVO4 photoanodes are synthesized by pulsed laser deposition (PLD). Once coated with a thin layer of cobalt oxide (CoOx) cocatalyst, also by PLD, the photoanodes support efficient photoelectrochemical generation of chlorine (Cl2) from brine under simulated solar light. The activity of the chlorine generation reaction (ClER) is optimized when the thickness of CoOx is about 3 nm, with the faradic efficiency of ClER exceeding 60%. Detailed studies show that the CoOx cocatalyst layer is amorphous, uniform in thickness, and chemically robust. As such, the cocatalyst also effectively protects the underlying BiVO4 photoanodes against chlorine corrosion. This work provides insights into using artificial photosynthesis for byproducts that carry significant economic value while avoiding the energetically expensive oxygen evolution reactions.

Insight into the Key Restriction of BiVO4 Photoanodes Prepared by Pyrolysis Method for Scalable Preparation

Bismuth Vanadate (BiVO4 ) photoanode has been popularly investigated for promising solar water oxidation, but its intrinsic performance has been greatly retarded by the direct pyrolysis method. Here we insight the key restriction of BiVO4 prepared by metal-organic decomposition (MOD) method. It is found that the evaporation of vanadium during the pyrolysis tends to cause a substantial phase impurity, and the unexpected few tetragonal phase inhibits the charge separation evidently. Consequently, suitably excessive vanadium precursor was adopted to eliminate the phase impurity, based on which the obtained intrinsic BiVO4 photoanode could exhibit photocurrent density of 4.2 mA cm-2 at 1.23 VRHE under AM 1.5 G irradiation, as comparable to the one fabricated by the currently popular two-step electrodeposition method. Furthermore, the excellent performance can be maintained on the enlarged photoanode (25 cm2 ), demonstrating the advantage of MOD method in scalable preparation. Our work provides new insight and highlights the glorious future of MOD method for the design of scale-up efficient BiVO4 photoanode.

Surface Rh-Boosted Photoelectrochemical Water Oxidation of α-Fe2O3 by Reduced Overpotential in the Rate-Determining Step

The photoelectrochemical behavior of Rh cluster-deposited hematite (α-Fe2O3) photoanodes (α-Fe2O3@Rh) was investigated. The interactions between Rh clusters and α-Fe2O3 nanorods were elucidated both experimentally and computationally. A facile UV-assisted solution casting deposition method allowed the deposition of 2 nm Rh clusters on α-Fe2O3. The deposited Rh clusters effectively enhanced the photoelectrochemical performance of the α-Fe2O3 photoanode, and electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis were applied to understand the working mechanism for the α-Fe2O3@Rh photoanodes. The results revealed a distinctive carrier transport mechanism for α-Fe2O3@Rh and increased carrier density, while the absorbance spectra remained unchanged. Furthermore, density functional theory (DFT) calculations of the oxygen evolution reaction (OER) mechanism corresponded well with the experimental results, indicating a reduced overpotential of the rate-determining step. In addition, DFT calculation models based on the X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS) results provided precise water-splitting mechanisms for the fabricated α-Fe2O3 and α-Fe2O3@Rh nanorods. Owing to enhanced carrier generation and hole transfer, the optimum α-Fe2O3@Rh3 sample showed 78% increased photocurrent density, reaching 1.12 mA/cm-2 at 1.23 VRHE compared to that of the pristine α-Fe2O3 nanorods electrode.

Single-atomic-site platinum steers photogenerated charge carrier lifetime of hematite nanoflakes for photoelectrochemical water splitting

Although much effort has been devoted to improving photoelectrochemical water splitting of hematite (α-Fe₂O₃) due to its high theoretical solar-to-hydrogen conversion efficiency of 15.5%, the low applied bias photon-to-current efficiency remains a huge challenge for practical applications. Herein, we introduce single platinum atom sites coordination with oxygen atom (Pt-O/Pt-O-Fe) sites into single crystalline α-Fe₂O₃ nanoflakes photoanodes (SAs Pt:Fe₂O₃-Ov). The single-atom Pt doping of α-Fe₂O₃ can induce few electron trapping sites, enhance carrier separation capability, and boost charge transfer lifetime in the bulk structure as well as improve charge carrier injection efficiency at the semiconductor/electrolyte interface. Further introduction of surface oxygen vacancies can suppress charge carrier recombination and promote surface reaction kinetics, especially at low potential. Accordingly, the optimum SAs Pt:Fe₂O₃-Ov photoanode exhibits the photoelectrochemical performance of 3.65 and 5.30 mA cm^-2 at 1.23 and 1.5 V_RHE, respectively, with an applied bias photon-to-current efficiency of 0.68% for the hematite-based photoanodes. This study opens an avenue for designing highly efficient atomic-level engineering on single crystalline semiconductors for feasible photoelectrochemical applications.

2,3-Dihydroxynaphthalene invoked surface oxygen vacancy effect on Fe2O3 nanorods for photoanodic signal transduction tactic

The state-of-art signal transduction mechanism of anodic photoelectrochemistry is constrained to the hole oxidation reaction, which greatly hinders its application for prospective biosensing applications. Herein, we present an innovative strategy for signal transduction by exploiting the in situ formation of surface oxygen vacancies (V_Os) on Fe₂O₃ nanorods (NRs) through the self-coordination of 2,3-dihydroxynaphthalene (2,3-DHN) on their surfaces. The 2,3-DHN was connected with Fe(Ⅲ) on the surface of Fe₂O₃ NRs vis the formation of the five-membered ring structures accompanied by the generation of V_Os. And the generated V_Os introduced a new defect energy level for trapping the photogenerated holes, which enhanced the charge separation and realized the enhancement of photocurrent signal. The developed signal transduction strategy was validated by the first photoelectrochemical (PEC) sensing platform for β-glucoside (β-Glu) and lipase (LPS), which can catalyze the hydrolysis of 3-hydroxy-2-naphthalenyl-β-D-glucoside and naphthalene-2,3-diol diacetate, respectively, to produce 2,3-DHN for signal stimuli. The β-Glu and LPS were detected with linear ranges of 0.01-10.0 U/mL and 0.001-5.0 mg/mL, respectively. Detection limits of 3.3 × 10^-3 U/mL and 0.32 μg/mL (S/N = 3) were achieved, for β-Glu and LPS, respectively. The present study not only provides a new strategy for spontaneous induction of V_Os in situ for n-type semiconductors, but also innovates the anodic PEC signal transduction strategy with broadened biosensing applications.

Photoelectrocatalytic peroxymonosulfate activation over CoFe2O4-BiVO4 photoanode for environmental purification: Unveiling of multi-active sites, interfacial engineering and degradation pathways

This work reported on the development of CoFe₂O₄-BiVO₄ photoanode based photoelectrocatalytic system collaborating with peroxymonosulfate activation for organic contaminants removal. CoFe₂O₄ layer not only provided active sites for direct peroxymonosulfate activation but also accelerated charge separation process for the enhancement of photocurrent density and photoelectrocatalytic performance. Junction of CoFe₂O₄ layer on BiVO₄ photoanode led to the improvement of photocurrent density to 4.43 mA/cm² at 1.23 V_RHE, which was approximately 4.06 times higher than that of pure BiVO₄. Subsequently, the corresponding optimal degradation efficiency toward the tetracycline model contaminant achieved to be 89.1% with total organic carbon removal value of about 43.7% within 60 min. Moreover, the degradation rate constant of CoFe₂O₄-BiVO₄ photoanode in photoelectrocatalytic system was 0.037 min^-1, which was about 1.23, 2.64 and 3.70 times higher than the values in photocatalysis, electrocatalysis and PMS only based systems, respectively. In addition, radical scavenging experiments and electron spin resonance spectra indicated a synergy of radical and nonradical coupling process where •OH and ¹O₂ played vital roles during tetracycline degradation. Plausible photoelectrocatalytic mechanism and degradation pathway were proposed. This work provided an effective strategy to construct peroxymonosulfate assisted photoelectrocatalytic system toward green environmental applications.

Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO4 Photoanode

The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO₄ photoanode, while the PEC performance of most BiVO₄ photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO₄ photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO₄ photoanode results in a photocurrent density of 6.04 mA cm^-2 and a DHA production rate of 325.2 mmol m^-2 h^-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO₄ to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄ ) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x ) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄ /VO_x photoanode exhibits a photocurrent density of 6.29 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.

Process Accumulated 8% Efficient Cu2 ZnSnS4 -BiVO4 Tandem Cell for Solar Hydrogen Evolution with the Dynamic Balance of Solar Energy Storage and Conversion

A process accumulated record solar to hydrogen (STH) conversion efficiency of 8% is achieved on the Cu₂ ZnSnS₄ -BiVO₄ tandem cell by the synergistic coupling effect of solar thermal and photoelectrochemical (PEC) water splitting with the dynamic balance of solar energy storage and conversion of the greenhouse system. This is the first report of a Cu₂ ZnSnS₄ -BiVO₄ tandem cell with a high unbiased STH efficiency of over 8% for solar water splitting due to the greenhouse device system. The greenhouse acts as a solar thermal energy storage cell, which absorbs infrared solar light and storage as thermal energy with the solar light illumination time, while thermoelectric device (TD) converts thermal energy into electric power, electric power is also recycled and added onto Cu₂ ZnSnS₄ -BiVO₄ tandem cell for enhanced overall water splitting. Finally, the solar water splitting properties of the TD-Cu₂ ZnSnS₄ -BiVO₄ integrated tandem cell in pure natural seawater are demonstrated, and a champion STH efficiency of 2.46% is presented, while a large area (25 cm² ) TD-Cu₂ ZnSnS₄ -BiVO₄ integrated tandem device with superior long-term stability is investigated for 1 week, which provides new insight into photoelectrochemical solar water splitting devices.

Dynamic semiconductor-electrolyte interface for sustainable solar water splitting over 600 hours under neutral conditions

Photoelectrochemical (PEC) water splitting that functions in pH-neutral electrolyte attracts increasing attention to energy demand sustainability. Here, we propose a strategy to in situ form a NiB layer by tuning the composition of the neutral electrolyte with the additions of nickel and borate species, which improves the PEC performance of the BiVO₄ photoanode. The NiB/BiVO₄ exhibits a photocurrent density of 6.0 mA cm^-2 at 1.23 V_RHE with an onset potential of 0.2 V_RHE under 1 sun illumination. The photoanode displays a photostability of over 600 hours in a neutral electrolyte. The additive of Ni²⁺ in the electrolyte, which efficiently inhibits the dissolution of NiB, can accelerate the photogenerated charge transfer and enhance the water oxidation kinetics. The borate species with B─O bonds act as a promoter of catalyst activity by accelerating proton-coupled electron transfer. The synergy effect of both species suppresses the surface charge recombination and inhibits the photocorrosion of BiVO₄.

Hybrid Ce-Fe2O3/ZIF-67 Photoanode with Efficient Photoelectrochemical Water Oxidation Performance

Surface states and slow water oxidation kinetics greatly limit the photoelectrochemical (PEC) water oxidation performance of Fe₂O₃. To solve the above problems, coupling Fe₂O₃ with a passivation layer and an oxygen evolution cocatalyst, respectively, is the common method. Though this method may improve its PEC performance, this also results in a low charge-transfer efficiency caused by the interface resistance between Fe₂O₃ and the modification materials (passivation layer and oxygen evolution cocatalyst). Therefore, it is important to identify a multifunctional modifier material to reduce the interfacial resistance due to the presence of multiple different materials. In this work, we introduced a thin cobalt-based metal-organic framework layer (ZIF-67) as a dual-functional material that acted as both a passivation layer and a water oxidation cocatalyst for a photoanode based on Ce-Fe₂O₃ nanorod arrays. The ZIF-67 layer inhibited charge carrier recombination by passivating the surface states. The PEC performance was improved due to the rich Co²⁺ photogenerated hole-capture sites, which facilitated charge transfer and separation. As expected, the Ce-Fe₂O₃/ZIF-67 photoanode exhibited superior water oxidation performance, with a photocurrent of 2.07 mA cm^-2 at 1.23 V_RHE, which is 1.74 times higher than that of the Ce-Fe₂O₃ photoanode. The onset potential was negatively shifted by 71 mV. This study provides basic insights and a strategy for reducing interfacial resistance in hybrid materials.

Boosting H2 Production from a BiVO4 Photoelectrochemical Biomass Fuel Cell by the Construction of a Bridge for Charge and Energy Transfer

Utilizing a photoelectrochemical (PEC) fuel cell to replace difficult water oxidation with facile oxidation of organic wastes is regarded as an effective method to improve the H₂ production efficiency. However, in most reported PEC fuel cells, their PEC activities are still low and the energy in organic fuels cannot be effectively utilized. Here, a unique BiVO₄ PEC fuel cell is successfully developed by utilizing the low-cost biomass, tartaric acid, as an organic fuel. Thanks to the strong complexation between BiVO₄ and tartaric acid, a bridge for the charge and energy transfer is successfully constructed, which not only improves the photoelectric conversion efficiency of BiVO₄ , but also effectively converts the chemical energy of biomass into H₂ . Remarkably, under AM1.5G illumination, the optimal nanoporous BiVO₄ photoanode exhibits a high current density of 13.54 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE) for H₂ production, which is higher than that of previously reported PEC water splitting systems or PEC fuel cell systems. This work opens a new path for solving the low PEC H₂ production efficiency and provides a new idea for improving the performances and energy conversion efficiency in traditional PEC fuel cells.

Ultrathin-FeOOH-Coated MnO2 Sonosensitizers with Boosted Reactive Oxygen Species Yield and Remodeled Tumor Microenvironment for Efficient Cancer Therapy

Sonodynamic therapy (SDT) typically suffers from compromised anticancer efficacy owing to the low reactive oxygen species (ROS) yield and complicated tumor microenvironment (TME) which can consume ROS and support the occurrence and development of tumors. Herein, ultrathin-FeOOH-coated MnO₂ nanospheres (denoted as MO@FHO) as sonosensitizers which can not only facilitate ultrasound (US)-triggered ROS but also tune the TME by hypoxia alleviation, H₂ O₂ consumption as well as glutathione (GSH) depletion are designed. The FeOOH coating will boost the production yield of singlet oxygen (¹ O₂ ) and hydroxyl radicals (^• OH) by inhibiting the recombination of US-initiated electron-hole pairs and Fenton-like reaction, respectively. Additionally, the catalase-like and GSH peroxidase-like activities of MO@FHO nanospheres enable them to break the TME equilibrium via hypoxia alleviation and GSH depletion. The combination of high ROS yield and fundamental destruction of TME equilibrium results in satisfactory antitumor outcomes, as demonstrated by the high tumor suppression efficacy of MO@FHO on MDA-MB-231-tumor-bearing mice. No obvious toxicity is detected to normal tissues at therapeutic doses in vivo. The capability to modulate the ROS production and TME simultaneously can afford new probability for the development of advanced sonosensitizers for synergistic comprehensive cancer therapy.

Activating a Semiconductor-Liquid Junction via Laser-Derived Dual Interfacial Layers for Boosted Photoelectrochemical Water Splitting

The semiconductor-liquid junction (SCLJ), the dominant place in photoelectrochemical (PEC) catalysis, determines the interfacial activity and stability of photoelectrodes, whcih directly affects the viability of PEC hydrogen generation. Though efforts dedicated in past decades, a challenge remains regarding creating a synchronously active and stable SCLJ, owing to the technical hurdles of simultaneously overlaying the two advantages. The present work demonstrates that creating an SCLJ with a unique configuration of the dual interfacial layers can yield BiVO₄ photoanodes with synchronously boosted photoelectrochemical activity and operational stability, with values located at the top in the records of such photoelectrodes. The bespoke dual interfacial layers, accessed via grafting laser-generated carbon dots with phenolic hydroxyl groups (LGCDs-PHGs), are experimentally verified effective, not only in generating the uniform layer of LGCDs with covalent anchoring for inhibited photocorrosion, but also in activating, respectively, the charge separation and transfer in each layer for boosted charge-carrier kinetics, resulting in FeNiOOH-LGCDs-PHGs-MBVO photoanodes with a dual configuration with the photocurrent density of 6.08 mA cm^-2 @ 1.23 V_RHE , and operational stability up to 120 h @ 1.23 V_RHE . Further work exploring LGCDs-PHGs from catecholic molecules warrants the proposed strategy as being a universal alternative for addressing the interfacial charge-carrier kinetics and operational stability of semiconductor photoelectrodes.

Engineering MoOx /MXene Hole Transfer Layers for Unexpected Boosting of Photoelectrochemical Water Oxidation

The development of semiconductor photoanodes is of great practical interest for the realization of photoelectrochemical (PEC) water splitting. Herein, MXene quantum dots (MQD) were grafted on a BiVO₄ substrate, then a MoO_x layer by combining an ultrathin oxyhydroxide oxygen evolution cocatalyst (OEC) was constructed as an integrated photoanode. The OEC/MoO_x /MQD/BiVO₄ array not only achieves a current density of 5.85 mA cm^-2 at 1.23 V versus a reversible hydrogen electrode (vs. RHE), but also enhances photostability. From electrochemical analysis and density functional theory calculations, high PEC performance is ascribed to the incorporation of MoO_x /MQD as hole transfer layers, retarding charge recombination, promoting hole transfer and accelerating water splitting kinetics. This proof-of-principle work not only demonstrates the potential utilization of hole transfer layers, but also sheds light on rational design and fabrication of integrated photoanodes for feasible solar energy conversion.

Promoting effects of Y doping and FeOOH loading for efficient photoelectrochemical activity on BiVO4 electrodes

An FeOOH/Y-BiVO4 photoelectrode with high PEC performance was obtained using a combination of Y-doping and modification with FeOOH. The FeOOH/Y-BiVO4 photoelectrode exhibited efficient PEC activity for solar water oxidation and wastewater treatment.

Boosting photoelectrochemical activity of bismuth vanadate by implanting oxygen-vacancy-rich cobalt (oxy)hydroxide

Surface charge recombination is regarded as a detrimental factor that severely downgrades the photoelectrochemical (PEC) performance of bismuth vanadate (BiVO₄). In this work, we demonstrate defect-rich cobalt (oxy)hydroxides (Co(O)OH) as an excellent cocatalyst nanolayer sheathed on BiVO₄ to substantially improve the PEC water oxidation activity. The self-transformation of metal-organic framework produces an ultrathin Co(O)OH layer rich in oxygen vacancies, which could serve as a powerful hole extraction engine to promote the charge transfer/separation efficiency as well as an excellent oxygen evolution reaction catalyst to accelerate the surface water oxidation kinetics. As a result, the BiVO₄/Co(O)OH hybrid photoanode achieves remarkably inhibited surface charge recombination and presents a prominent photocurrent density of 4.2 mA cm^-2 at 1.23 V vs. RHE, which is around 2.6-fold higher than that of the pristine BiVO₄. Moreover, the Co(O)OH cocatalyst nanolayer significantly reduces the onset potential of BiVO₄ photoanodes by 200 mV. This work provides a versatile strategy for rationally preparing oxygen-vacancy-rich cocatalysts on various photoanodes toward high-efficient PEC water oxidation.

Solar-to-Pharmaceutical Raw Material Production: Photoelectrochemical Naphthoquinone Formation Using Stabilized BiVO4 Photoanodes in Acid Media

In the quest for efficient use of solar energy to produce high-value-added chemicals, we first achieved the photoelectrochemical (PEC) diketonization of naphthalene, using a BiVO₄/WO₃ photoanode, to obtain naphthoquinone, an important pharmaceutical raw material with excellent efficiency by solar energy conversion. In the electrochemical (EC) reaction using F-doped SnO₂ (FTO) substrates and a 0.5 M H₂SO₄ H₂O-acetone (60 vol %) mixed solution containing 5 mM naphthalene, we produced a small amount of naphthoquinone evolution in the dark. However, naphthoquinone (η_NQ)'s Faradic efficiency and its evolution rate at 1.7 V_Ag/AgCl were only 28.5% and 0.48 μmol·cm^-2·h^-1, respectively. The PEC reaction using a WO₃ photoanode had very low efficiency for naphthalene diketonization, with low η_NQ and evolution rate values at 1.1 V_Ag/AgCl of 0.3% and 0.039 μmol·cm^-2·h^-1, respectively. In contrast, the BiVO₄/WO₃ photoanode strongly enhanced the PEC reaction, and the η_NQ and evolution rates at 1.1 V_Ag/AgCl were boosted up to 37.5% and 4.7 μmol·cm^-2·h^-1, respectively. The evolution rate of the PEC reaction in the BiVO₄/WO₃ photoanode was 10 times higher than that of the EC reaction with the FTO substrate regardless of the very low bias voltage. This result suggests that the BiVO₄-based photoanode was very efficient for the selective oxidation of naphthalene even in acid media because of the acetone-mixed electrolyte's anti-photocorrosion effect and the multilayering of WO₃ and BiVO₄. At a naphthalene concentration of 20 mM, the naphthoquinone evolution rate reached its maximum value of 7.1 μmol·cm^-2·h^-1. Although η_NQ tended to decrease with the increase in the electric charge, it reached 100% at a low bias voltage of 0.7 V_Ag/AgCl. An intensity-modulated photocurrent spectroscopy analysis indicated the rate constant of charge transfer at the photoanode surface to the naphthalene molecules was strongly enhanced at a low bias voltage of 0.7-1.1 V_Ag/AgCl, resulting in the high η_NQ value. The acid-resistant BiVO₄/WO₃ photoanode functioned in acetone-mixed electrolytes enabled the realization of a new PEC oxidation reaction driven by solar energy to produce high-value-added pharmaceutical raw materials.

The hydrophilic treatment of a novel co-catalyst for greatly improving the solar water splitting performance over Mo-doped bismuth vanadate

In this work, Molybdenum (Mo) doped bismuth vanadate (BiVO₄) is carried out by traditional calcination method, while carbon-based cobalt (Co-Ci) is prepared by photoelectric deposition (PED) and used as co-catalyst to decorate the surface, its photocurrent density reached 3.15 mA/cm² at 1.23 V vs RHE. More importantly, the H-Co-Ci/Mo: BiVO₄ photoanode obtained by plasma etching of Co-Ci/Mo: BiVO₄ has greatly improved surface hydrophilicity. The photocurrent density of H-Co-Ci/Mo: BiVO₄ photoanode is 4.8 times that of BiVO₄ photoanode, reaching 3.95 mA/cm². In addition, the incident photon-current conversion efficiency (IPCE) value of the H-Co-Ci/Mo: BiVO₄ photoanode is as high as 60%, and both the injection and separation efficiency have also been enhanced. The enhanced photoelectrochemical (PEC) performance is attributed to the good wettability of the material surface and improvement of water oxidation kinetics. These findings provide a mild and efficient modification method for improving BiVO₄ used for water splitting, and are expected to provide new ideas for other photoanodes.

Photo-driven Oxygen Vacancies Extends Charge Carrier Lifetime for Efficient Solar Water Splitting

A photocharge/discharge strategy is proposed to initiate the WO₃ photoelectrode and suppress the main charge recombination, which remarkably improves the photoelectrochemical (PEC) performance. The photocharged WO₃ surrounded by a 8-10 nm overlayer and oxygen vacancies could be operated more than 25 cycles with 50 h durability without significant decay on PEC activity. A photocharged WO₃ /CuO photoanode exhibits an outstanding photocurrent of 3.2 mA cm^-2 at 1.23 V_RHE with a low onset potential of 0.6 V_RHE , which is one of the best performances of p-n heterojunction structure. Using nonadiabatic molecular dynamics combined with time-domain DFT, we clarify the prolonged charge carrier lifetime of photocharged WO₃ , as well as how electronic systems of photocharged WO₃ /CuO semiconductors enable the effective photoinduced electrons transfer from WO₃ into CuO. This work provides a feasible route to address excessive defects existed in photoelectrodes without causing extra recombination.

Metal Oxy-Hydroxides with a Hierarchical and Hollow Structure for Highly Efficient Solar-Thermal Water Evaporation

Solar-thermal water evaporation is a promising technology for pure water production. However, the design of low-cost systems for efficient antifouling solar-thermal water evaporation remains a challenge. Herein, an evaporator based on metal oxy-hydroxides with a hierarchical and hollow structure is rationally designed through material selection and structural engineering. The obtained evaporator possesses good light absorption performance, excellent antifouling property against oil, and enhanced heat localization ability. Consequently, the water evaporation rate reaches as high as 1.65 kg m^-2 h^-1 with a solar-thermal conversion efficiency up to 82.3% under 1 sun illumination. More importantly, the evaporator exhibits almost identical evaporation performance in oily wastewater and natural seawater due to its superhydrophilicity and underwater superoleophobicity. This work provides a worth-adopted approach to prepare solar-thermal evaporators with high efficiency and anti-oil-fouling property, highlighting the new application of metal oxy-hydroxide-based materials and the importance of a hierarchical and hollow structure for efficient solar-thermal water evaporation.

Deposition of zinc cobaltite nanoparticles onto bismuth vanadate for enhanced photoelectrochemical water splitting

During the past few decades, photoelectrochemical (PEC) water splitting has attracted significant attention because of the reduced production cost of hydrogen obtained by utilizing solar energy. Significant efforts have been invested by the scientific community to produce stable ternary metal oxide semiconductors, which can enhance the stability and increase the overall production of oxygen. Herein, we present the ternary metal oxide deposition of ZnCo₂O₄ as a route to obtain a novel photocatalyst layer on BiVO₄ to form BiVO₄/ZnCo₂O₄ a novel composite photoanode for PEC water splitting. The structural, topographical, and optical analyses were performed using field emission scanning electron microscopy, X-ray diffraction, high-resolution transmission electron microscopy, and UV-Vis spectroscopy to confirm the structure of the ZnCo₂O₄ grafted over BiVO₄. A remarkable 4.4-fold enhancement of the photocurrent was observed for the BiVO₄/ZnCo₂O₄ composite compared with bare BiVO₄ under visible illumination. The optimum loading of ZnCo₂O₄ over BiVO₄ yields unprecedented stable photocurrent density with an apparent cathodic shift of 0.46 V under 1.5 AM simulated light illumination. This is also evidenced by the flat-band potential change through Mott-Schottky analysis, which reveals the formation of p-ZnCo₂O₄ on n-BiVO₄. The improvement in the PEC performance of the composite with respect to bare BiVO₄ is ascribed to the formation of thin passivating layer of p-ZnCo₂O₄ on n-BiVO₄ which improves the kinetics of interfacial charge transfer. Based on our study, we have gained an in-depth understanding of the BiVO₄/ZnCo₂O₄ composite as high potential in efficient PEC water splitting devices.

Improving light absorption and photoelectrochemical performance of thin-film photoelectrode with a reflective substrate

The charge separation/transport efficiency is relatively high in thin-film hematite photoanodes in which the distance for charge transport is short, but simultaneously the high loss of light absorption due to transmission is confronted. To increase light absorption in thin-film Fe₂O₃:Ti, commercial substrates such as Cu foil, Ag foil, and a mirror are adopted acting as back-reflectors and individually integrated with the Fe₂O₃:Ti electrode. The promotion effect of the commercial back-reflectors on the light absorption efficiency and photoelectrochemical (PEC) performance of the hydrothermally prepared Fe₂O₃:Ti electrodes with a variety of film thicknesses is investigated. As a result, Ag foil and the mirror show favorable and equal efficacy while the promoting effect of Cu foil is limited. In addition, the photocurrent increment achieved by the Ag back-reflector decreases linearly along with the logarithmic of the film thickness and the optimized film thickness of the Fe₂O₃:Ti electrode is decreased from 520 to 290 nm. The high durability of Ag foil in the alkaline electrolyte during solar light irradiation is demonstrated. Furthermore, the reflective substrate also shows a promotion effect on the BiVO₄ photoanode and CuBi₂O₄ photocathode, as well as the unbiased photocurrent from a tandem cell constituted by TiO₂ and CuBi₂O₄.

The charge separation/transport efficiency is relatively high in thin-film hematite photoanodes in which the distance for charge transport is short, but simultaneously the high loss of light absorption due to transmission is confronted.

Insight into interface charge regulation through the change of the electrolyte temperature toward enhancing photoelectrochemical water oxidation

The desired photoelectrochemical performance can be achieved by temperature regulation, but the nature for this improvement remains a controversial topic. Herein, we employed BiVO₄/CoO_x as a typical model system, and explored the fate of photogenerated holes at the different interfaces among BiVO₄/CoO_x/electrolyte by means of intensity modulated photocurrent spectroscopy (IMPS), scanning photoelectrochemical microscopy (SPECM) and traditional electrocatalysis characterization methods. Systematic quantitative analysis of the kinetics of photogenerated holes transfer at the BiVO₄/CoO_x interface under illumination and surface water oxidation at the CoO_x/electrolyte interface in the dark indicates that increasing temperature could not only enhance the surface catalytic reaction kinetics but also facilitate the interfacial charge transfer. As expected, the integrated system exhibited a remarkable photocurrent density of 3.6 mA cm^-2 (1.23 V_RHE, AM 1.5G, 45 °C), which is approximately 2.1 times higher than that of BiVO₄/CoO_x (15 °C). This work provides a promising strategy for achieving efficient photoelectrochemical water splitting.

Acid-Resistant BiVO4 Photoanodes: Insolubility Control by Solvents and Weak W Diffusion in the Lattice

We have revealed for the first time that BiVO₄ photoanodes can be used even in strong acid media by mixing organic solvents into the electrolyte and depositing multilayers with a WO₃ bottom layer. In general, the BiVO₄ photoanodes are photocorrosive, especially in acid solutions. However, this shortcoming has been overcome using a combination of the two aforementioned modifications. We deduced that the contribution of each mixing organic solvent for the anti-photocorrosion of BiVO₄ in sulfuric acid solutions can be evaluated on the basis of a new empirical indicator that incorporates molecular density, the Hansen solubility parameter, and molecular polarizability. Acetone and tert-butyl alcohol were especially promising solvents for stabilizing BiVO₄ in acid media. We confirmed that the mixed organic solvents stabilized surface-emergent Bi oxide species as a passivation layer, which was generated via multilayering with a WO₃ bottom layer. During heat treatment in the fabrication process, W weakly diffused into the BiVO₄ layer and a Bi oxide layer was formed on the outermost surface because of the Bi segregation that arose from the charge compensation between W⁶⁺ and V⁵⁺ in the BiVO₄ lattice. The surface Bi oxide layer, which was protected by the mixed organic solvents, steadily served as a passivation layer for anti-photocorrosion of the underlying BiVO₄ layer. We have confirmed that the BiVO₄/WO₃ photoanodes in acetone-mixed aqueous sulfuric acid solution reliably functioned for a photoelectrochemical reaction under simulated sunlight illumination, and photoelectrochemical production of S₂O₈^2- ions was confirmed under light irradiation at λ > 480 nm. These results suggest that the BiVO₄-based photoanodes have significant potential for use in acid media in conjunction with very straightforward modifications.

Enhanced Photoelectrochemical Water Splitting on Nickel-Doped Cobalt Phosphate by Modulating both Charge Transfer and Oxygen Evolution Efficiencies

Detrimental charge recombination at photoanode/electrolyte junctions severely impedes photoelectrochemical (PEC) performance. The deposition of cobalt phosphate (CoPi) onto photoanodes is an efficient approach to achieve high PEC efficiency. However, achieving performances at the required remains a huge challenge, owing to the passivation effect of CoPi. In this study, function-tunable strategy, whereby the passivation role is switched with the activation role, is exploited to modulate PEC performance through simultaneous activation of interface charge transfer and surface catalysis. By depositing nickel-doped CoPi onto a BiVO₄ (BV) substrate, the integrated system (BV/Ni₁ Co₇ Pi) exhibits a remarkable photocurrent density (4.15 mA cm^-2 ), which is a 4.6-fold increase relative to BV (0.90 mA cm^-2 ). Moreover, the satisfactory performance can be also achieved on α-Fe₂ O₃ photoanode. These findings provide guidance for improving the efficiency of CoPi on photoanodes for PEC water oxidation.

Plasmon-enhanced unidirectional charge transfer for efficient solar water oxidation

Precise modulation and nano-engineering of photoelectrochemical (PEC) materials, with high-speed charge separation efficiency and broad spectral response, are of significant importance in improving the PEC catalytic activities. Herein, by rational design of material structures, 3D-coaxial plasmonic hetero-nanostructures (carbon cloth@TiO2@SrTiO3-Au, CC@TiO2@SrTiO3-Au) are tactfully fabricated, which exhibit superior solar energy conversion efficiency in PEC water splitting with a current density reaching up to 23.56 mA cm-2 (1.23 V vs. RHE). More specific research and in-depth simulations reveal that the enhanced PEC performance should be attributed to the high-speed charge transfer channels of CC@TiO2@SrTiO3 and excellent light utilization ability stemming from the surface plasmon resonance and strong light-scattering of the 3D-coaxial frameworks. This study provides new strategies for the design of plasmon-enhanced PEC nanocatalysts and will benefit the development of photoelectric energy conversion.

Kinetically Controlled, Scalable Synthesis of γ-FeOOH Nanosheet Arrays on Nickel Foam toward Efficient Oxygen Evolution: The Key Role of In-Situ-Generated γ-NiOOH

Layered γ-type iron oxyhydroxide (γ-FeOOH) is a promising material for various applications; however, its sheet-shaped structure often suffers from instability that results in aggregation and leads to inferior performance. Herein, a kinetically controlled hydrolysis strategy is proposed for the scalable synthesis of γ-FeOOH nanosheets arrays (NAs) with enhanced structural stability on diverse substrates at ambient conditions. The underlying mechanisms for the growth of γ-FeOOH NAs associated with their structural evolution are systematically elucidated by alkalinity-controlled synthesis and time-dependent experiments. As a proof-of-concept application, γ-FeOOH NAs are developed as electrocatalysts for the oxygen evolution reaction (OER), where the sample grown on nickel foam (NF) exhibits superior performance of high catalytic current density, small Tafel slope, and exceptional durability, which is among the top level of FeOOH-based electrocatalysts. Density functional theory calculations suggest that γ-NiOOH in situ generated from the electrooxidation of NF would induce charge accumulation on the Fe sites of γ-FeOOH NAs, leading to enhanced OER intermediates adsorption for water splitting. This work affords a new technique to rationally design and synthesize γ-FeOOH NAs for various applications.

Insight into the Transition-Metal Hydroxide Cover Layer for Enhancing Photoelectrochemical Water Oxidation

Depositing a transition-metal hydroxide (TMH) layer on a photoanode has been demonstrated to enhance photoelectrochemical (PEC) water oxidation. However, the controversial understanding for the improvement origin remains a key challenge to unlock the PEC performance. Herein, by taking BiVO₄ /iron-nickel hydroxide (BVO/F_x N_4-x -H) as a prototype, we decoupled the PEC process into two processes including charge transfer and surface catalytic reaction. The kinetic information at the BVO/F_x N_4-x -H and F_x N_4-x -H/electrolyte interfaces was systematically evaluated by employing scanning photoelectrochemical microscopy (SPECM), intensity modulated photocurrent spectroscopy (IMPS) and oxygen evolution reaction (OER) model. It was found that F_x N_4-x -H acts as a charge transporter rather than a sole electrocatalyst. PEC performance improvement is mainly ascribed to the efficient suppression of charge recombination by fast hole transfer kinetics at BVO/F_x N_4-x -H interface.