2D Piezoelectric BiVO4 Artificial Nanozyme with Adjustable Vanadium Vacancy for Ultrasound Enhanced Piezoelectric/Sonodynamic Therapy

Increasing the yield of reactive oxygen species (ROS) to enhance oxidative stress in cells is an eternal goal in cancer therapy. In this study, BiVO4 artificial nanozyme is developed with adjustable vanadium vacancy for ultrasound (US) enhanced piezoelectric/sonodynamic therapy. Under US excitation, the vanadium vacancy-rich BiVO4 nanosheets (abbreviated Vv -r BiVO4 NSs) facilitate the generation of a large number of electrons to improve the ROS yield. Meanwhile, the mechanical strain imposed by US irradiation makes the Vv -r BiVO4 NSs display a typical piezoelectric response, which tilts the conduction band to be more negative and the valance band more positive than the redox potentials of O2 /O2 •- and H2 O/·OH, boosting the efficiency of ROS generation. Both density functional theory calculations and experiments confirm that the introduction of cationic vacancy can improve the sonodynamic effect. As expected, Vv -r BiVO4 NSs have better peroxidase enzyme catalytic and glutathione depletion activities, resulting in increased intracellular oxidative stress. This triple amplification strategy of oxidative stress induced by US substantially inhibits the growth of cancer cells. The work may open an avenue to achieve a synergetic therapy by introducing cationic vacancy, broadening the biomedical use of piezoelectric materials.

Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO4 Photoanode

The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO₄ photoanode, while the PEC performance of most BiVO₄ photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO₄ photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO₄ photoanode results in a photocurrent density of 6.04 mA cm^-2 and a DHA production rate of 325.2 mmol m^-2 h^-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO₄ to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.

Boosting H2 Production from a BiVO4 Photoelectrochemical Biomass Fuel Cell by the Construction of a Bridge for Charge and Energy Transfer

Utilizing a photoelectrochemical (PEC) fuel cell to replace difficult water oxidation with facile oxidation of organic wastes is regarded as an effective method to improve the H₂ production efficiency. However, in most reported PEC fuel cells, their PEC activities are still low and the energy in organic fuels cannot be effectively utilized. Here, a unique BiVO₄ PEC fuel cell is successfully developed by utilizing the low-cost biomass, tartaric acid, as an organic fuel. Thanks to the strong complexation between BiVO₄ and tartaric acid, a bridge for the charge and energy transfer is successfully constructed, which not only improves the photoelectric conversion efficiency of BiVO₄ , but also effectively converts the chemical energy of biomass into H₂ . Remarkably, under AM1.5G illumination, the optimal nanoporous BiVO₄ photoanode exhibits a high current density of 13.54 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE) for H₂ production, which is higher than that of previously reported PEC water splitting systems or PEC fuel cell systems. This work opens a new path for solving the low PEC H₂ production efficiency and provides a new idea for improving the performances and energy conversion efficiency in traditional PEC fuel cells.

Flexoelectric Domain Walls Originated from Structural Phase Transition in Epitaxial BiVO4 Films

Polar domain walls in centrosymmetric ferroelastics induce inhomogeneity that is the origin of advantageous multifunctionality. In particular, polar domain walls promote charge-carrier separation and hence are promising for energy conversion applications that overcome the hurdles of the rate-limiting step in the traditional photoelectrochemical water splitting processes. Yet, while macroscopic studies investigate the materials at the device scale, the origin of this phenomenon in general and the emergence of polar domain walls during the structural phase transition in particular has remained elusive, encumbering the development of this attractive system. Here, it is demonstrated that twin domain walls arise in centrosymmetric BiVO₄ films and they exhibit localized piezoelectricity. It is also shown that during the structural phase transition from the tetragonal to monoclinic, the symmetry reduction is accompanied by an emergence of strain gradient, giving rise to flexoelectric effect and the polar domain walls. These results not only expose the emergence of polar domain walls at centrosymmetric systems by means of direct observation, but they also expand the realm of potential application of ferroelastics, especially in photoelectrochemistry and local piezoelectricity.

Boosting Charge Transport in BiVO4 Photoanode for Solar Water Oxidation

The ability to regulate charge separation is pivotal for obtaining high efficiency of any photoelectrode used for solar fuel production. Vacancy engineering for metal oxide semiconductor photoelectrode is a major strategy but has faced a formidable challenge in bulk charge transport because of the elusive charge self-trapping site. In this work, a new deep eutectic solvent to engineer bismuth vacancies (Bi_vac ) of BiVO₄ photoanode is reported; the novel Bi_vac can remarkably increase the charge diffusion coefficient by 5.8 times (from 1.82 × 10^-7 to 1.06 × 10^-6 cm² s^-1 ), which boosts the charge transport efficiency. Through further loading CoBi cocatalyst to enhance charge transfer efficiency, the photocurrent density of BiVO₄ photoanode with optimal Bi_vac concentration reaches 4.5 mA cm^-2 at 1.23 V vs reversible hydrogen electrode under AM 1.5 G illumination, which is higher than that of previously reported O_vac engineered BiVO₄ photoanode where the BiVO₄ photoanode is synthesized by a similar procedure. This work perfects a cation defect engineering that enables the potential capability to equate the charge transport properties in different types of semiconductor materials for solar fuel conversion.

Periodic Micropillar-Patterned FTO/BiVO4 with Superior Light Absorption and Separation Efficiency for Efficient PEC Performance

In this study, a high-performance photoanode based on 3D periodic, micropillar-structured fluorine-doped tin oxide (FTO-MP) deposited with BiVO₄ is fabricated using the patterned FTO by direct printing and spray pyrolysis, followed by the deposition of BiVO₄ by sputtering and V ion heat-treatment on the patterned FTO. The FTO-MP enables light scattering owing to its 3D periodic structure and increases the light absorption efficiency. In addition, the high electron mobility of FTO and enlarged surface area of FTO-MP enhance the separation efficiency. Due to the combination of these enhancing strategies, the photocurrent density of micropillar-patterned BiVO₄ at 1.23 V_RHE reached 2.97 mA cm^-2 , which is 67.8% higher than that of flat BiVO₄ . The results suggest that the efficiency can increase significantly using the patterned FTO fabricated by an inexpensive and simple process (i.e., direct printing and spray pyrolysis), thereby indicating a new strategy for the enhancement of efficiency in various energy fields.

Suppressing Water Dissociation via Control of Intrinsic Oxygen Defects for Awakening Solar H2 O-to-H2 O2 Generation

BiVO₄ theoretically has a thermodynamic activity trend toward highly selective water oxidative H₂ O₂ formation, but it is more inclined to generate O₂ in practical. The influence of intrinsic oxygen vacancy (O_vac ), especially, on surface reactivity, has never been considered as a possible activity loss mechanism in the synthetic BiVO₄ . In this work, it is theoretically and experimentally demonstrated that the intrinsic surface O_vac is responsible for lower H₂ O₂ evolution activity via promoting water dissociation to form intermediate. Through an annealing process under a V₂ O₅ rich atmosphere, the surface O_vac can be eliminated that awakens the photoelectrochemical (PEC) water oxidative H₂ O₂ activity in a NaHCO₃ electrolyte, which achieves an average of 58.4%, and increases by up to 4.28 times of the one annealed in air. This work offers a general understanding of catalytic activity loss and may be extended to other photo or electrocatalysts for catalytic selectivity regulation.