Anti-competitive adsorption of gaseous benzene on hydrophilic microporous carbon in humid conditions

The adsorption capture of ambient volatile organic compounds (VOCs) is of practical importance for air quality management. Herein, unique anti-competitive adsorption behavior of benzene on a hydrophilic activated carbon (Procarb-900 (P900)) is evidenced in the presence of competing components (e.g., formaldehyde (FA) and/or moisture). Contrary to general expectations, the adsorption capacity of 10 Pa benzene (QB) onto P900 (30 mg) at the 99 % breakthrough level improves from 144.8 to 187 mg g-1 as the relative humidity (RH) increases from 0 to 25 %. Such pattern is maintained at 183.9 mg g-1 even at the relatively high RH of 50 %. Furthermore, QB exhibits a remarkable increase of 56.1 % (to 226.0 mg g-1) in the binary phase (100 ppm benzene plus 50 ppm FA) relative to its single phase (144.8 mg g-1). The kinetic studies confirm the occurrence of anti-competitive adsorption of benzene under humid conditions with the unusual decrease in rate constants at the elevated RHs (i.e., 25 and 50 %). The thermodynamic studies suggest the exothermic nature of benzene adsorption onto P900. The hydrophilicity of P900's outer surface promotes the preferential adsorption of polar FA and water vapor over non-polar benzene, which deforms the activated carbon texture and lowers the pore size distribution (PSD). The narrow PSD enhances benzene uptake in the complex systems due to the confinement effect. Overall, this study offers insights into the unique anti-competitive adsorption of non-polar VOCs (e.g., benzene) on hydrophilic microporous adsorbents in the presence of potential interferences such as polar water vapor and FA. These findings offer a guideline for the practical implementation of adsorption techniques for gaseous VOCs in humid conditions.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

Record-high capture of volatile benzene and toluene enabled by activator implant-optimized banana peel-derived engineering carbonaceous adsorbents

This work developed a super-high performance of engineering carbonaceous adsorbents from waste banana-peel via an optimized KOH-impregnated approach, which affords outstanding structural property (S_BET = 3746.5 m² g^-1, V_total = 2.50 cm³ g^-1), far outperforming KOH-grinding method-induced counterpart and other known banana peel-derived those. Thereby, this triggers a record-high capture value of volatile organic compounds (VOCs) specific to benzene (27.55 mmol g^-1) and toluene (23.82 mmol g^-1) in the all known results. The structural expression characters were accurately correlated with excellent adsorption efficiency of VOCs by investigating the synthetic factor-controlling comparative samples. Ulteriorly, the adsorption selectivity prediction at different relative humidity was demonstrated through the DIH (difference of the isosteric heats), highlighting the good superiority in selective adsorption of toluene compared to benzene even under humid atmosphere. Our findings provide the possibility for the practical application and fabrication of waste biomass (banana peel)-derived functional biochar adsorbent in the environmental treatment of threatening VOCs pollutants.

An efficient tool for the continuous monitoring on adsorption of sub-ppm level gaseous benzene using an automated analytical system based on thermal desorption-gas chromatography/mass spectrometry approach

It became an important task to effectively adsorb volatile organic compounds (VOCs) at or near real-world levels for efficient control of airborne pollution in ambient environments. Nonetheless, most studies carried out previously for the control of VOCs are confined to significantly polluted conditions (e.g., >100 ppm) that are far different from real-world or ambient conditions. To help acquire the meaningful data for the adsorptive removal of VOCs at near real-world levels, a new approach was designed and implemented to measure adsorption of gaseous benzene (as a representative or model VOC) at trace-level quantities (as low as 0.14 ng (0.43 ppb) for a 100 mL sample) using activated carbon (sieved to 212 μm mesh size) as a model sorbent. With the aid of a thermal desorption-gas chromatography/mass spectrometry system, the key adsorption performance metrics (such as 10% breakthrough volume (10% BTV) points: 10% as the key reference) were determined: 1018 L atm g^-1 at 0.1 ppm benzene with the corresponding partition coefficient of 3.85 mol kg^-1 Pa^-1. If the adsorption capacity values (at 10% BTV) are compared across the varying concentration levels of benzene, the maximum value of 1.07 mg g^-1 was observed at 1 ppm benzene (within the concentration range selected in this work). As such, it was possible to quantitatively assess the sorbate-sorbent interactions at significantly low concentrations of VOCs that actually prevail under the near real-world conditions.

Evidence of inter-species swing adsorption between aromatic hydrocarbons

In this research, the competitive adsorption characteristics between aromatic hydrocarbons were investigated. It is well-known that an industrial effluent may contain a mixture of pollutants. The composition of effluents is usually highly variable in nature to depend upon the feedstock. Hence, one of the pollutants that is present in larger amounts may have the potential to dominate the sorption processes. Although many studies have investigated the competitive adsorption of volatile organic compounds (VOCs) onto activated carbon (AC) in detail, little is known about how the overall process is influenced when a fresh incoming VOC molecule encounters a sorbent bed pre-loaded with other VOCs. Consequently, the objective of the present study was to investigate the stability of pre-adsorbed VOC molecules in the presence of other potentially competitive VOCs in the influent stream. In this regard, the sorbent bed of AC was first preloaded with benzene (50 ppm (0.16 mg L^-1)) and subsequently challenged by either high purity nitrogen or a stream of xylene (at 10, 50, or 100 ppm (0.043, 0.22, or 0.43 mg L^-1)). The desorption rate of preloaded benzene and uptake rate of challenger xylene were assessed simultaneously. The maximum desorption rates of benzene (R_b) against two challenge scenarios (e.g., 100 ppm (0.43 mg L^-1) xylene and pure N₂) were very different from each other, i.e., 663 vs. 257 g kg^-1 h^-1, and their final benzene recoveries were 84% and 42%, respectively. The initially high desorption rate for the former quickly decreased with decreasing benzene residual capacity (C, mg g^-1). Interestingly, the adsorption capacity of xylene increased considerably after the preloading of benzene (relative to no preloading). As such, 10% breakthrough volumes (BTV10) of 100, 50, and 10 ppm (0.43, 0.22, and 0.043 mg L^-1) xylene challenge scenarios increased significantly from 100 to 186, 43.4 to 694, and 600 to 1000 L atm g^-1, respectively. The prevalent mechanisms were analyzed using density functional theory (DFT)-based modelling approaches. The results demonstrated effective replacement of pre-adsorbed molecules with weaker affinity (e.g., benzene) when challenged by molecules with stronger affinity (e.g., xylene) toward the sorbent; this was accompanied by noticeable synergistic enhancement in the adsorption capacity of the latter.

Metal Organic Frameworks as Desulfurization Adsorbents of DBT and 4,6-DMDBT from Fuels

Ultradeep desulfurization of fuels is a method of enormous demand due to the generation of harmful compounds during the burning of sulfur-containing fuels, which are a major source of environmental pollution. Among the various desulfurization methods in application, adsorptive desulfurization (ADS) has low energy demand and is feasible to be employed at ambient conditions without the addition of chemicals. The most crucial factor for ADS application is the selection of the adsorbent, and, currently, a new family of porous materials, metal organic frameworks (MOFs), has proved to be very effective towards this direction. In the current review, applications of MOFs and their functionalized composites for ADS are presented and discussed, as well as the main desulfurization mechanisms reported for the removal of thiophenic compounds by various frameworks. Prospective methods regarding the further improvement of MOF's desulfurization capability are also suggested.

Adsorptive desulfurization of liquid hydrocarbons using zeolite-based sorbents: a comprehensive review

Adsorptive desulfurization using modified Y zeolite is an efficient process for the removal of sulfur from transportation fuels.

The effect of functional groups in the aqueous-phase selective sensing of Fe(iii) ions by thienothiophene-based zirconium metal–organic frameworks and the design of molecular logic gates

The effect of functional groups in the fluorescence sensing of Fe(iii) ions in aqueous medium by four thienothiophene-based Zr MOFs is discussed.

Metal–organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents

Toxic gases can be captured or degraded by metal–organic frameworks.

Controlling Thermal Expansion: A Metal-Organic Frameworks Route

Controlling thermal expansion is an important, not yet resolved, and challenging problem in materials research. A conceptual design is introduced here, for the first time, for the use of metal-organic frameworks (MOFs) as platforms for controlling thermal expansion devices that can operate in the negative, zero, and positive expansion regimes. A detailed computer simulation study, based on molecular dynamics, is presented to support the targeted application. MOF-5 has been selected as model material, along with three molecules of similar size and known differences in terms of the nature of host-guest interactions. It has been shown that adsorbate molecules can control, in a colligative way, the thermal expansion of the solid, so that changing the adsorbate molecules induces the solid to display positive, zero, or negative thermal expansion. We analyze in depth the distortion mechanisms, beyond the ligand metal junction, to cover the ligand distortions, and the energetic and entropic effect on the thermo-structural behavior. We provide an unprecedented atomistic insight on the effect of adsorbates on the thermal expansion of MOFs as a basic tool toward controlling the thermal expansion.

Metal organic frameworks as sorption media for volatile and semi-volatile organic compounds at ambient conditions

In this research, we investigated the sorptive behavior of a mixture of 14 volatile and semi-volatile organic compounds (four aromatic hydrocarbons (benzene, toluene, p-xylene, and styrene), six C₂-C₅ volatile fatty acids (VFAs), two phenols, and two indoles) against three metal-organic frameworks (MOFs), i.e., MOF-5, Eu-MOF, and MOF-199 at 5 to 10 mPa VOC partial pressures (25 °C). The selected MOFs exhibited the strongest affinity for semi-volatile (polar) VOC molecules (skatole), whereas the weakest affinity toward was volatile (non-polar) VOC molecules (i.e., benzene). Our experimental results were also supported through simulation analysis in which polar molecules were bound most strongly to MOF-199, reflecting the presence of strong interactions of Cu²⁺ with polar VOCs. In addition, the performance of selected MOFs was compared to three well-known commercial sorbents (Tenax TA, Carbopack X, and Carboxen 1000) under the same conditions. The estimated equilibrium adsorption capacity (mg.g⁻¹) for the all target VOCs was in the order of; MOF-199 (71.7) >Carboxen-1000 (68.4) >Eu-MOF (27.9) >Carbopack X (24.3) >MOF-5 (12.7) >Tenax TA (10.6). Hopefully, outcome of this study are expected to open a new corridor to expand the practical application of MOFs for the treatment diverse VOC mixtures.

Adsorptive desulfurization and denitrogenation using metal-organic frameworks

With the increasing worldwide demand for energy, utilization of fossil fuels is increasing proportionally. Additionally, new and unconventional energy sources are also being utilized at an increasing rate day-by-day. These sources, along with some industrial processes, result in the exposal of several sulfur- and nitrogen-containing compounds (SCCs and NCCs, respectively) to the environment, and the exposure is one of the greatest environmental threats in the recent years. Although, several methods were established for the removal of these pollutants during the last few decades, recent advancements in adsorptive desulfurization and denitrogenation (ADS and ADN, respectively) with metal-organic frameworks (MOFs) make this the most promising and remarkable method. Therefore, many research groups are currently involved with ADS and ADN with MOFs, and the results are improving gradually by modifying the MOF adsorbents according to several specific adsorption mechanisms. In this review, ADS and ADN studies are thoroughly discussed for both liquid-phase and gas-phase adsorption. The MOF modification procedures, which are important for improved adsorption, are also described. To improve the knowledge among the scientific community, it is very important to understand the detailed chemistry and mechanism involved in a chemical process, which also creates the possibility and pathway for further developments in research and applications. Therefore, the mechanisms related to the adsorption procedures are also discussed in detail. From this review, it can be expected that the scientific community will obtain an understanding of the current state of ADS and ADN, their importance, and some encouragement and insight to take the research knowledge base to a higher level.