Pore-Functionalized Nanoporous Materials Derived from Block Copolymers

Diblock and Triblock Copolymers as Nanostructured Precursors to Functional Nanoporous Materials: From Design to Application

Block copolymers have gained tremendous interest from the scientific community in the last two decades. These macromolecular architectures indeed constitute ideal nanostructured precursors for the generation of nanoporous materials meant for various high added value applications. The parallel emergence of controlled polymerization techniques has notably enabled to finely control their molecular features to confer them with unique structural and physicochemical properties, such as low dispersity values (Đ), well-defined volume fractions, and controlled functionality. The nanostructuration and ordering of diblock or triblock copolymers, which can be achieved through various experimental techniques, including channel die processing, solvent vapor or thermal annealing, nonsolvent-induced phase separation or concomitant self-assembly, and nonsolvent-induced phase separation, allows for the preparation of orientated microphase-separated copolymers whose morphology is dictated by three main factors, i.e., Flory-Huggins interaction parameter between constitutive blocks, volume fraction of the blocks, and polymerization degree. This review article provides an overview of the actual state of the art regarding the preparation of functional nanoporous materials from either diblock or triblock copolymers. It will also highlight the major applications of such peculiar materials.

Metallic Nanoparticles Adsorbed at the Pore Surface of Polymers with Various Porous Morphologies: Toward Hybrid Materials Meant for Heterogeneous Supported Catalysis

Hybrid materials consisting of metallic nanoparticles (NPs) adsorbed on porous polymeric supports have been the subject of intense research for many years. Such materials indeed gain from intrinsic properties, e.g., high specific surface area, catalytic properties, porous features, etc., of both components. Rational design of such materials is fundamental regarding the functionalization of the support surface and thus the interactions required for the metallic NPs to be strongly immobilized at the pore surface. Herein are presented some significant scientific contributions to this rapidly expanding research field. This contribution will notably focus on various examples of such hybrid systems prepared from porous polymers, whatever the morphology and size of the pores. Such porous polymeric supports can display pores with sizes ranging from a few nanometers to hundreds of microns while pore morphologies, such as spherical, tubular, etc., and/or open or closed, can be obtained. These systems have allowed some catalytic molecular reactions to be successfully undertaken, such as the reduction of nitroaromatic compounds or dyes, e.g., methylene blue and Eosin Y, boronic acid-based C–C homocoupling reactions, but also cascade reactions consisting of two catalytic reactions achieved in a row.

Functional Nanoporous Materials From Boronate-Containing Stimuli-Responsive Diblock Copolymers

Functional nanoporous polymeric materials have been prepared from novel polystyrene-block-poly(ethylene oxide) (PS-b-PEO) diblock copolymer precursors containing a reversible boronate ester junction between both blocks. To this purpose, homopolymers presenting either...

Porous Gold Nanoparticle-Decorated Nanoreactors Prepared from Smartly Designed Functional Polystyrene-block-Poly(d,l-Lactide) Diblock Copolymers: Toward Efficient Systems for Catalytic Cascade Reaction Processes

Original porous catalytic supports can be engineered via an effective and straightforward synthetic route to polystyrene-block-poly(d,l-lactide) diblock copolymer precursors displaying an acid-cleavable acetal junction between both blocks. To this purpose, we synthesized an acetal-containing heterodifunctional initiator, thus enabling to combine two different polymerization methods, i.e., first atom transfer radical polymerization (ATRP) of styrene, and then ring-opening polymerization (ROP) of d,l-lactide. Thanks to the labile nature of the acetal junction, oriented porous frameworks could be obtained upon trifluoroacetic acid-mediated cleavage of the latter, after orientation of the block copolymer nanodomains by solvent vapor annealing. The resulting porous materials bearing a reactive aldehyde function at the pore surface allowed for further chemical modification via reductive amination with amino-containing compounds, such as tetraethylenepentamine, thus leading to amine-functionalized porous polystyrene. In situ generated gold nanoparticles could then be immobilized within such functionalized porous nanoreactors, and these hybrid materials could find interesting applications in heterogeneous supported catalysis. In this regard, model catalytic reactions, including C-C homocoupling of benzeneboronic acid derivatives, hydride-mediated reduction of nitroaromatic compounds, and especially unprecedented "one-pot" cascade reactions consisting of the latter consecutive reactions from 3-nitrobenzeneboronic acid, were successfully monitored by different chromatographic and spectroscopic techniques.

Photoinitiated Polymerization-Induced Microphase Separation for the Preparation of Nanoporous Polymer Films

We report on the use of photoinitiated reversible addition-fragmentation chain transfer (RAFT) polymerization for the facile fabrication of cross-linked nanoporous polymer films with three-dimensionally (3D) continuous pore structure. The photoinitiated polymerization of isobornyl acrylate (IBA) in the presence of 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (CTA) and 2,2-dimethoxy-2-phenylacetophenone as a photoinitiator proceeded in a controlled manner, yet more rapidly compared to thermally initiated polymerization. When polylactide-macroCTA (PLA-CTA) was used, PLA-b-PIBA with high molar mass was obtained after several minutes of irradiation at room temperature. We confirmed that microphase separation occurs in the PLA-b-PIBA and that nanoporous PIBA can be derived from the PLA-b-PIBA precursor by selective PLA etching. To fabricate the cross-linked nanoporous polymer, IBA was copolymerized with ethylene glycol diacrylate (EGDA) in the presence of PLA-CTA to produce a cross-linked block polymer precursor consisting of bicontinuous PLA and P(IBA-co-EGDA) microdomains, via polymerization-induced microphase separation. We demonstrated that nanoporous P(IBA-co-EGDA) monoliths and films with 3D continuous pores can be readily obtained via this approach.

Isoporous block copolymer membranes

The developments in membranes based on tailored block copolymers are reported with an emphasis on isoporous membranes. These membranes can be prepared in different geometries, namely flat sheets and hollow fibers. They display narrow pore size distributions due to their formation by self-assembly. The preparation of these membranes and possibilities to further functionalize such membranes will be discussed. Different ways to control the pore size will be addressed, and the potential of block copolymer blends to fabricate membranes with tailored pore sizes will be shown.

Self-assembly of an interacting binary blend of diblock copolymers in thin films: a potential route to porous materials with reactive nanochannel chemistry

Self-assembly of a binary mixture of poly(styrene)336-block-poly(4-vinyl pyridine)25 (PS336-b-P4VP25) and poly(ethylene glycol)113-block-poly(4-hydroxy styrene)25 (PEG113-b-P4HS25) is shown to give rise to a cylindrical morphology in thin films through pyridine/phenol-based hetero-complementary hydrogen bonding interactions between the P4VP and P4HS copolymer segments. Removal of the cylindrical phase (PEG-b-P4HS) allowed access to porous materials having a pore surface decorated with P4VP polymer blocks. These segments could be transformed into cationic polyelectrolytes through quaternization of the pyridine nitrogen atom. The resulting positively charged nanopore surface could recognize negatively charged gold nanoparticles through electrostatic interactions. This work, therefore, outlines the utility of the supramolecular AB/CD type of block copolymer towards preparation of ordered porous thin films carrying a chemically defined channel surface with a large number of reactive sites.

Asymmetric organic-inorganic hybrid membrane formation via block copolymer-nanoparticle co-assembly

A facile method for forming asymmetric organic-inorganic hybrid membranes for selective separation applications is developed. This approach combines co-assembly of block copolymer (BCP) and inorganic nanoparticles (NPs) with non-solvent induced phase separation. The method is successfully applied to two distinct molar mass BCPs with different fractions of titanium dioxide (TiO2) NPs. The resulting hybrid membranes exhibit structural asymmetry with a thin nanoporous surface layer on top of a macroporous fingerlike support layer. Key parameters that dictate membrane surface morphology include the fraction of inorganics used and the length of time allowed for surface layer development. The resulting membranes exhibit both good selectivity and high permeability (3200 ± 500 Lm(-2) h(-1) bar(-1)). This fast and straightforward synthesis method for asymmetric hybrid membranes provides a new self-assembly platform upon which multifunctional and high-performance organic-inorganic hybrid membranes can be formed.