Impact of polypropylene prolapse mesh on vaginal smooth muscle in rhesus macaque

The use of animal models in preclinical investigations for the development of a surgical mesh for pelvic organ prolapse

INTRODUCTION AND HYPOTHESIS

Polypropylene (PP) mesh for the treatment of pelvic organ prolapse (POP) has raised substantial concerns over long-term complications, leading to its ban in multiple countries. In response, emerging materials are being explored as alternatives for prolapse surgery. Preclinical animal models have historically played a pivotal role in validating medical devices, prior to clinical trials. Successful translation of these materials necessitates the identification of suitable animal models that replicate the female human pelvis and its biomechanical properties. Preclinical in vivo testing assesses the safety of surgical mesh and treatment efficacy in preventing POP recurrence.

METHODS

The research critically reviews animal models used for preclinical pelvic mesh testing over the last decade and proposes a promising model for future preclinical studies.

RESULTS

Rats were the most common mammal used for toxicity and biocompatibility investigations through abdominal implantation. Although non-human primates serve as a gold standard for efficacy testing, ethical considerations limit their use owing to their close biological and cognitive resemblance to humans. Consequently, sheep were the most preferred large animal model owing to their reproductive system similarities and propensity for spontaneous POP following parity.

CONCLUSION

The study contributes valuable insights into the selection of appropriate animal models for preclinical pelvic mesh testing, offering guidance that is crucial for enhancing the safety and efficacy of novel surgical interventions in the treatment of POP.

Mesh Deformation: a mechanism underlying polypropylene prolapse mesh complications in vivo

Polypropylene meshes used in pelvic organ prolapse (POP) repair are hampered by complications. Most POP meshes are highly unstable after tensioning ex vivo, as evidenced by marked deformations (pore collapse and wrinkling) that result in altered structural properties and material burden. By intentionally introducing collapsed pores and wrinkles into a mesh that normally has open pores and remains relatively flat after implantation, we reproduce mesh complications in vivo. To do this, meshes were implanted onto the vagina of rhesus macaques in nondeformed (flat) vs deformed (pore collapse +/- wrinkles) configurations and placed on tension. Twelve weeks later, animals with deformed meshes had two complications, 1) mesh exposure through the vaginal epithelium, and 2) myofibroblast proliferation with fibrosis - a mechanism of pain. The overarching response to deformed mesh was vaginal thinning associated with accelerated apoptosis, reduced collagen content, increased proteolysis, deterioration of mechanical integrity, and loss of contractile function consistent with stress shielding - a precursor to mesh exposure. Regional differences were observed, however, with some areas demonstrating myofibroblast proliferation and matrix deposition. Variable mechanical cues imposed by deformed meshes likely induce these two disparate responses. Utilizing meshes associated with uniform stresses on the vagina by remaining flat with open pores after tensioning is critical to improving outcomes. STATEMENT OF SIGNIFICANCE: Pain and exposure are the two most reported complications associated with the use of polypropylene mesh in urogynecologic procedures. Most meshes have unstable geometries as evidenced by pore collapse and wrinkling after tensioning ex vivo, recapitulating what is observed in meshes excised from women with complications in vivo. We demonstrate that collapsed pores and wrinkling results in two distinct responses 1) mesh exposure associated with tissue degradation and atrophy and 2) myofibroblast proliferation and matrix deposition consistent with fibrosis, a tissue response associated with pain. In conclusion, mesh deformation leads to areas of tissue degradation and myofibroblast proliferation, the likely mechanisms of mesh exposure and pain, respectively. These data corroborate that mesh implantation in a flat configuration with open pores is a critical factor for reducing complications in mesh-augmented surgeries.

Smooth Muscle Organization and Nerves in the Rat Vagina: A First Look Using Tissue Clearing and Immunolabeling

Smooth muscle fibers within the vagina, as well as the nerve fibers that contribute to their control mechanisms, are important for the maintenance and alteration of vaginal length and tone. Vaginal smooth muscle (VaSM) is typically described as being arranged into two distinct concentric layers: an inner circular muscular layer and an outer longitudinal muscular layer. However, the distribution of VaSM oriented in the longitudinal direction (LD) and circumferential direction (CD) has never been quantified. In this study, tissue clearing and immunohistochemistry were performed so that the VaSM, and surrounding nerves, within whole rat vaginas ([Formula: see text]) could be imaged without tissue sectioning, preserving the three-dimensional architecture of the organs. Using these methods, the vagina was viewed through the full thickness of the muscularis layer, from the distal to the proximal regions. The VaSM orientation in the proximal and distal regions and the VaSM content along the LD and CD were quantified. Additionally, a qualitative assessment of vaginal nerves was performed. When compared using a permuted version of the Watson [Formula: see text] test, the orientation of VaSM in the proximal and distal regions were found to be significantly different in 4 of the 6 imaged rat vaginas ([Formula: see text]). While the distal vagina contained a similar amount of VaSM oriented within [Formula: see text] of the LD and within [Formula: see text] of the CD, the proximal vagina contained significantly more VaSM oriented towards the LD than towards the CD. Nerve fibers were found to be wavy, running both parallel and perpendicular to vascular and non-vascular smooth muscle within the vagina. Micro-structural analyses, like the one conducted here, are necessary to understand the physiological function and pathological changes of the vagina.

Endometrial SUSD2+ Mesenchymal Stem/Stromal Cells in Tissue Engineering: Advances in Novel Cellular Constructs for Pelvic Organ Prolapse

Cellular therapy is an emerging field in clinical and personalised medicine. Many adult mesenchymal stem/progenitor cells (MSC) or pluripotent derivatives are being assessed simultaneously in preclinical trials for their potential treatment applications in chronic and degenerative human diseases. Endometrial mesenchymal stem/progenitor cells (eMSC) have been identified as clonogenic cells that exist in unique perivascular niches within the uterine endometrium. Compared with MSC isolated from other tissue sources, such as bone marrow and adipose tissue, eMSC can be extracted through less invasive methods of tissue sampling, and they exhibit improvements in potency, proliferative capacity, and control of culture-induced differentiation. In this review, we summarize the potential cell therapy and tissue engineering applications of eMSC in pelvic organ prolapse (POP), emphasising their ability to exert angiogenic and strong immunomodulatory responses that improve tissue integration of novel surgical constructs for POP and promote vaginal tissue healing.

Strains induced in the vagina by smooth muscle contractions

The ability of the vagina to contract gives rise to a set of active mechanical properties that contribute to the complex function of this organ in-vivo. Regional differences in the morphology of the vagina have been long recognized, but the large heterogeneous deformations that the vagina experiences during contractions have never been quantified. Furthermore, there is no consensus regarding differences in contractility along the two primary anatomical directions of the vagina: the longitudinal direction (LD) and the circumferential direction (CD). In this study, square vaginal specimens from healthy virgin rats (n=15) were subjected to isometric planar biaxial tests at four equi-biaxial stretches of 1.0, 1.1, 1.2, and 1.3. Contractions were induced at each stretch by a high concentration potassium solution. The digital image correlation method was used to perform full-field strain measurements during contractions. The vagina was found to undergo significantly higher compressive strains, tensile strains, and contractile forces along the LD than along the CD during contractions. Specifically, when computed over all the applied equi-biaxial stretches, mean (± std. dev.) absolute maximum compressive strains were -(13.43 ± 1.56)% along the LD and -(3.19 ± 0.25)% along the CD, mean absolute maximum tensile strains were (10.92 ± 1.73)% along the LD and (3.62 ± 0.57)% along the CD, and mean maximum contractile forces were 6.24 ± 0.55 mN along the LD and 3.35 ± 0.56 mN along the CD. Moreover, the vaginal tissue appeared to undergo compression in the proximal region and tension in the distal region while kept at constant equi-biaxial stretches. The active mechanical properties of the healthy vagina need to be fully investigated so that detrimental alterations in vaginal contractility, such as those caused by pelvic floor disorders and current treatment strategies, can be prevented. STATEMENT OF SIGNIFICANCE: Contractile forces of the vagina have been measured by several investigators using uniaxial tensile testing methods. Unlike previous studies, in this study planar-biaxial tests of vaginal specimens were performed while the full-field strains of the vagina, as induced by smooth muscle contraction, were measured. The vagina was found to generate significantly larger contractile strains and forces in the longitudinal direction than in the circumferential direction. Knowledge of the contractile mechanics of the healthy vagina is essential to understand the detrimental effects that pelvic organ prolapse and the use of surgical meshes have on the functionality of smooth muscle in the vagina.

Mesenchymal stem cell-based bioengineered constructs enhance vaginal repair in ovariectomized rhesus monkeys

Transvaginal meshes repair for treating pelvic organ prolapse (POP) was halted by the U. S. Food and Drug Administration (FDA) because they can lead to severe complications. Therefore, investigations of new therapeutic strategies are urgently needed. Cell-based regenerative therapy holds great promise for the repair and restoration of damaged tissue. Here, we generated a bioengineered graft by seeding human umbilical cord mesenchymal stem cells (HUMSCs) on bioscaffolds to reconstruct the damaged vagina. In the in vitro study, HUMSCs proliferated well and the density was appropriate after 5 days of culture. Besides, we demonstrated that the differentiation potential of HUMSCs was maintained with external growth factor stimulation. The complete transcriptomic profile of HUMSCs revealed that HUMSCs cultured on grafts produced significantly higher levels of proangiogenic cytokines than cells cultured in tissue culture plates (TCPs). Three months after implantation of the bioengineered grafts into ovariectomized (OVX) rhesus monkeys via sacrocolpopexy, extracellular matrix reorganization, large muscle bundle formation, angiogenesis and, mechanical properties of the vagina were enhanced. To our knowledge, this is the first demonstration of the utility of stem cell-based bioengineered grafts for repairing damaged vaginal tissue in rhesus monkeys. These results elucidate a new approach for vagina repair and provide new ideas for treating POP.

Genital Prolapse Surgery: What Options Do We Have in the Age of Mesh Issues?

Here, we describe the current laparoscopic procedures for prolapse surgery and report data based on the application of these procedures. We also evaluate current approaches in vaginal prolapse surgery. Debates concerning the use of meshes have seriously affected vaginal surgery and threaten to influence reconstructive laparoscopic surgery as well. We describe the option of using autologous tissue in combination with the laparoscopic approach. Study data and problematic issues concerning the existing techniques are highlighted, and future options addressed.

Comparison of 2 single incision slings on the vagina in an ovine model

BACKGROUND

Stress urinary incontinence carries a significant healthcare burden for women worldwide. Single incision slings are minimally invasive mesh devices designed to treat stress urinary incontinence. For prolapse repair, meshes with higher porosity and lower structural stiffness have been associated with improved outcomes.

OBJECTIVE

In this study, we compared the higher stiffness, lower porosity Altis sling with the lower stiffness, higher porosity Solyx sling in an ovine model. We hypothesized that SIS-B would have a negative impact on the host response.

STUDY DESIGN

A total of Altis and Solyx single incision slings were implanted suburethrally into sheep according to the manufacturer's instructions on minimal tension. The mesh-urethral-vaginal complex and adjacent ungrafted vagina (no mesh control) were harvested en bloc at 3 months. Masson's trichrome and picrosirius red staining of 6 μm thin sections was performed to measure interfiber distance and tissue integration. Smooth muscle contractility to a 120 mM KCl stimulus was performed in an organ bath to measure myofiber-driven contractions. Standard biochemical assays were used to quantify glycosaminoglycan, total collagen, and elastin content, and collagen subtypes. Bending stiffness was performed in response to a uniaxial force to define susceptibility to folding/buckling. Statistical analysis was performed using Mann-Whitney, Gabriel's pairwise post hoc, Wilcoxon matched-pairs, and chi-square tests.

RESULTS

The animals had similar ages (3-5 years), parity (multiparous), and weights (45-72 kg). Trichrome cross sections showed that the Altis sling buckled in a "C" or "S" shape in most samples (8 of 11), whereas buckling after Solyx sling implantation was observed in only a single sample (1 of 13; P=.004). Tissue integration, as measured by the presence of collagen or smooth muscle between the mesh fibers on trichrome 4× imaging, was increased in samples implanted with the Solyx sling compared with the Altis sling (P<.05). Total collagen content decreased significantly with both products when compared with the ungrafted vagina consistent with stress shielding. There was no difference in the 2 groups with regard to glycosaminoglycan or elastin content. The Altis sling mesh tissue complex demonstrated significantly higher amounts of both collagen types I and III than the Solyx sling-implanted tissue and the ungrafted control. Smooth muscle contractility in response to 120 mM KCl was decreased after implantation of both slings compared with the sham (P=.011 and P<.01), with no difference between mesh types (P=.099). Bending stiffness in the Altis sling was more than 4 times lower than in the Solyx, indicating an increased propensity to buckle (0.0186 vs 0.0883).

CONCLUSION

The structurally stiffer Altis sling had decreased tissue integration and increased propensity to buckle after implantation. Increased collagen types I and III after the implantation of this device suggests that these changes may be associated with a fibrotic response. In contrast, the Solyx sling largely maintained a flat configuration and had improved tissue integration. The deformation of the Altis sling is not an intended effect and is likely caused by its lower bending stiffness. Both meshes induced a decrease in collagen content and smooth muscle contractility similar to previous findings for prolapse meshes and consistent with stress shielding. The long-term impact of buckling warrants further investigation.

A novel tropoelastin-based resorbable surgical mesh for pelvic organ prolapse repair

Pelvic organ prolapse is a common condition that affects 1 in 4 women across all age groups. It is mainly caused by vaginal birth injury and can be exacerbated by obesity and increased age. Until recently, treatment strategies often used non-degradable synthetic meshes for reconstructive surgery. However, owing to their frequent, unacceptable rate of adverse events such as mesh erosion, transvaginal meshes have been banned in many countries. Recent reports have highlighted the urgent need for biocompatible design of meshes for a safe and effective treatment in the long term. This study reports the design and evaluation of a novel, elastin based degradable mesh using an ovine model of POP as a potential surgical treatment. Elastin is a protein component of the ECM and provides elasticity to tissues throughout the body. Tropoelastin, the monomer subunit of elastin, has been used with success in electrospun constructs as it is a naturally cell interactive polymer. Biomaterials that incorporate tropoelastin support cell attachment and proliferation, and have been proven to encourage elastogenesis and angiogenesis in vitro and in vivo. The biological properties of tropoelastin were combined with the physical properties of PCL, a degradable synthetic polymer, with the aim of producing, characterizing and assessing the performance of continuous tropoelastin:PCL electrospun yarns. Using a modified spinneret electrospinning system and adjusting settings based on relative humidity, four blends of tropoelastin:PCL yarns were fabricated with concentration ratios of 75:25, 50:50, 25:75 and 0:100. Yarns were assessed for ease of manufacture, fibrous architecture, protein/polymer content, yarn stability - including initial tropoelastin release, mechanical strength, and ability to support cell growth. Based on overall favorable properties, a mesh woven from the 50:50 tropoelastin:PCL yarn was implanted into the vagina of a parous ewe with vaginal wall weakness as a model of pelvic organ prolapse. This mesh showed excellent integration with new collagen deposition by SEM and a predominant M2 macrophage response with few pro-inflammatory M1 macrophages after 30 days. The woven tropoelastin:PCL electrospun mesh shows potential as an alternative to non-degradable, synthetic pelvic organ prolapse mesh products.

Contractile Properties of Vaginal Tissue

The vagina is an important organ of the female reproductive system that has been largely understudied in the field of biomechanics. In recent years, some research has been conducted to evaluate the mechanical properties of the vagina, but much has focused on characterizing the passive mechanical properties. Because vaginal contractions play a central role in sexual function, childbirth, and development and treatment of pelvic floor disorders, the active mechanical properties of the vagina must be also quantified. This review surveys and summarizes published experimental studies on the active properties of the vagina including the differences in such properties determined by anatomic regions and orientations, neural pathways, life events such as pregnancy and menopause, pelvic floor disorders such as prolapse, and surgical mesh treatment. Conflicting experimental findings are presented, illustrating the need for further research on the active properties of the vagina. However, consensus currently exists regarding the negative impact of surgical mesh on vaginal contractility. This review also identifies knowledge gaps and future research opportunities, thus proving a firm foundation for novice and experienced researchers in this emerging area of biomechanics and encouraging more activity on women's sexual and reproductive health research.

Emerging Nano/Micro-Structured Degradable Polymeric Meshes for Pelvic Floor Reconstruction

Pelvic organ prolapse (POP) is a hidden women's health disorder that impacts 1 in 4 women across all age groups. Surgical intervention has been the only treatment option, often involving non-degradable meshes, with variable results. However, recent reports have highlighted the adverse effects of meshes in the long term, which involve unacceptable rates of erosion, chronic infection and severe pain related to mesh shrinkage. Therefore, there is an urgent unmet need to fabricate of new class of biocompatible meshes for the treatment of POP. This review focuses on the causes for the downfall of commercial meshes, and discusses the use of emerging technologies such as electrospinning and 3D printing to design new meshes. Furthermore, we discuss the impact and advantage of nano-/microstructured alternative meshes over commercial meshes with respect to their tissue integration performance. Considering the key challenges of current meshes, we discuss the potential of cell-based tissue engineering strategies to augment the new class of meshes to improve biocompatibility and immunomodulation. Finally, this review highlights the future direction in designing the new class of mesh to overcome the hurdles of foreign body rejection faced by the traditional meshes, in order to have safe and effective treatment for women in the long term.

A Meshless Practical Laparoscopic Sacrohysteropexy Modification and Long-term Outcomes

STUDY OBJECTIVE

To describe a new modification of laparoscopic sacrohysteropexy without using a mesh and report the 3-year outcomes.

DESIGN

A prospective cohort study.

SETTING

Minimally Invasive Gynecology Unit, Bursa Uludag University Hospital, Turkey.

PATIENTS

Women who were diagnosed with ≥ stage 2 uterine prolapse.

INTERVENTIONS

A laparoscopic sacrohysteropexy modification using a polyester fiber suture instead of a standard polypropylene mesh.

MEASUREMENTS AND MAIN RESULTS

The primary outcome was the anatomic success of the repair, with success defined as objective parameters using the pelvic organ prolapse quantification system. The secondary outcomes were subjective outcomes, which were assessed using the quality-of-life scales. Forty-seven women who underwent the procedure were followed up for a minimum of 3 years. Forty-four of the 47 patients had stage 0 or 1 prolapse at the end of the second year, according to the primary outcomes. The anatomic success rate was 93.6%. In the secondary outcomes, 2 patients were not satisfied with their pelvic floor after the second year. The subjective cure rate was 95.7%. There was a statistically significant improvement in both pelvic organ prolapse quantification and quality-of-life scores in the third postoperative year. The mean operating time was 84.6 minutes, and the mean estimated blood loss was 21.3 mL. There were no bladder or bowel complications in the perioperative or postoperative period.

CONCLUSION

Laparoscopic sacrohysteropexy can be performed safely with this meshless modification in uterine prolapse as an alternative.