Photocatalytic degradation of amoxicillin by carbon quantum dots modified K2Ti6O13 nanotubes: Effect of light wavelength

Decoration of 0D Bi3NbO7 nanoparticles onto 2D BiOIO3 nanosheets as visible-light responsive S-scheme photocatalyst for photo-oxidation of antibiotics in wastewater

In this work, a new S-type hybrid composed of 2D BiOIO3 and 0D Bi3NbO7 was proposed and hybridized by a facile self-assembly strategy. The developed nanomaterials were characterized and identified by a series of sophisticated analyses, like XRD, SEM, EIS, XPS, PL, UPS, EDS, BET, M-S, TEM, HRTEM, and DRS. The photocatalytic behavior of BiOIO3/Bi3NbO7 was examined and optimized against amoxicillin (AMX) and other types of antibiotics under a variety of environmental conditions, such as visible light (150 W LED), direct sunlight, pH (3-11), catalyst dosages (20-80 mg), humic acid (0-24 mg/L), AMX concentration (10-40 mg/L), and different inorganic ions (0.05 M). The optimized BiOIO3/Bi3NbO7 hybrid attained exceptional AMX degradation activity (96.5%) under visible light (60 min), with a reaction constant of up to 0.04559 min-1, exceeding bare BiOIO3 and Bi3NbO7 by 5.57 and 5.3 folds, respectively. The obtained BiOIO3/Bi3NbO7 hybrid unclosed expanded light utilization behavior compared with neat catalysts, which originates from the powerful incorporation between BiOIO3 and Bi3NbO7 in the S-type system. The radical investigations confirmed the superiority of BiOIO3/Bi3NbO7 in generating both •OH and •O2- during the photoreaction. The novel Bi3NbO7-based heterojunction afforded robust photostability in five treatment cycles and simple charge transfer activity in the S-type route, boosting the photo-mechanism for antibiotic degradation in an efficient manner. The building of the S-scheme heterojunction between BiOIO3 and Bi3NbO7 stimulates the utilization of holes by the recombination process and promotes the overall stability of the composite. Our study introduces a new class of semiconductor heterojunctions that may contribute to the development potential of the photocatalysis sector in wastewater treatment.

Amoxicillin degradation and high-value extracellular polymer recovery by algal-bacterial symbiosis systems

Algal-bacterial symbiosis systems have emerged as sustainable methods for the treatment of new pollutants and the recovery of resources. However, the bio-refinery of biomass derived from microalgae is inefficient and expensive. In order to simultaneously degrade antibiotic and recover resources efficiently, two algal-bacterial symbiosis systems were constructed using Pseudomonas aeruginosa (alginate overproduction) and Bacillus subtilis (poly-γ-glutamic acid overproduction) with amoxicillin-degrading-microalga Prototheca zopfii W1. The optimal conditions for W1 to degrade amoxicillin are 35 °C, pH 7, and 180 rpm. In the presence of 5-50 mg/L of amoxicillin, W1-P. aeruginosa and W1-B. subtilis exhibit higher amoxicillin degradation and produce more extracellular polymers than W1 or bacteria alone. The metabolomic analysis demonstrates that the algal-bacterial symbiosis enhances the tolerance of W1 to amoxicillin by altering carbohydrate metabolism and promotes the production of biopolymers by upregulating the precursors synthesis. Moreover, the removal of amoxicillin (10 mg/L) from livestock effluent by W1-P. aeruginosa and W1-B. subtilis is greater than 90 % in 3 days, and the maximum yields of alginate and poly-γ-glutamate are 446.1 and 254.3 mg/g dry cell weight, respectively. These outcomes provide theoretical support for the application of algal-bacterial symbiosis systems to treatment of amoxicillin wastewater and efficient production of biopolymers.

Synthesis of highly fluorescent carbon quantum dots from rubber seed shells for the adsorption and photocatalytic degradation of dyes

The potentials of biomass-based carbon quantum dot (CQD) as an adsorbent for batch adsorption of dyes and its photocatalytic degradation capacity for dyes which are congo red (CR) and methylene blue (MB) have been conducted in this study. The CQDs properties, performance, behaviour, and photoluminescence characteristics were assessed using batch adsorption experiments which were carried out under operating conditions including, temperature, pH and dosage. The morphological analysis revealed that CQDs are highly porous, uniform, closely aligned and multi-layered. The presence of hydroxyl, carboxyl and carbonyl functional groups indicated the significance of the oxygenated functional groups. Spectral analysis of photoluminescence for CQDs confirmed their photoluminescent quality by exhibiting high excitation intensity and possessing greenish-blue fluorescence under UV radiation. The removal percentage of the dyes adsorbed for both CR and MB dyes was 77% and 75%. Langmuir isotherm and pseudo-second-order models closely fitted the adsorption results. Thermodynamics analysis indicated that the adsorption process was exothermic and spontaneous, with excellent reusability and stability. The degradation efficiency of CQDs on both dyes was more than 90% under sunlight irradiation and obeyed the first-order kinetic model. These results demonstrated CQDs to be an excellent adsorbent and outstanding photocatalyst for organic dye degradation.

Shaddock peels derived multilayer biochar with embedded CoO@Co nanoparticles for peroxymonosulfate based wastewater treatment

The utilization of bio-wastes, such as shaddock peels, is of great significance for sustainable development. Combined with the potential of peroxymonosulfate (PMS) based advanced oxidation process (AOP) in wastewater treatment, a highly efficient functional catalyst, derived from shaddock peels biochar (SPC) and embedded with CoO@Co nanoparticles, i.e. Co-SPC-x(y), was prepared using a facile impregnation-calcination method and used for refractory organics degradation with PMS. The decoration amount of Co and annealing temperature were optimized, and the effects of various reaction factors were investigated. The results indicated that the optimized sample of Co-SPC-10 (900) consisted of multilayer biochar with curly edges and highly dispersed CoO@Co nanoparticles in the range of 20-200 nm, which is in cubic metallic Co and CoO. Moreover, it also possessed a specific surface area of 248.6 m²/g, and exhibited excellent PMS activation ability with ∼100% chlortetracycline hydrochloride (CTC) removal ratio within only 12 min of operation. The Co-SPC-10 (900)/PMS system showed relatively high tolerance for HPO₄^2-, NO₃^- and SO₄^2-, while the Cl^- and HA had considerable effects on it. Mechanism exploration results revealed that both radical and non-radical pathways existed in the Co-SPC-10 (900)/PMS system, in which the multilayered biochar functioned as an electron transfer carrier to facilitate the continuous cycle of Co²⁺/Co³⁺ in the CoO@Co nanoparticles by reacting with the absorbed CTC and PMS, resulting in the production of •OH, SO₄^•-, O₂^•- and ¹O₂. Additionally, the Co-SPC-10 (900) also showed good stability and catalytic oxidation performance for various refractory organics.

Activity and mechanism of vanadium sulfide for organic contaminants oxidation with peroxymonosulfate

Transition metal sulfides have been demonstrated to be effective for peroxymonosulfate (PMS) activation towards wastewater treatment. However, the activity of vanadium sulfide (VS₄) and the role of the chemical state of V have not been revealed. Here, three types of VS₄ with various morphologies and chemical states of V were synthesized by using methanol (M-VS₄, nanosphere composed of nanosheets), ethanol (E-VS₄, sea urchin like nanosphere) and ultrapure water (U-VS₄, compact nanosphere) as hydrothermal solvent, respectively, and used as heterogeneous catalysts to activate PMS for the degradation of refractory organic pollutants. The effects of PMS concentration, temperature, pH, inorganic ions, and humic acid (HA) on the degradation efficiency of VS₄/PMS system were investigated systematically. The results indicated that the highest specific surface area and lowest ratio of V⁵⁺ enable E-VS₄/PMS system possessed the highest performance in degrading tetracycline hydrochloride (TCH), in which 100% TCH was removed after operating 10 min (0.805 min^-1) under a relatively low concentration of PMS (1 mM) and catalyst (100 mg/L). It also revealed that the system exhibited a typical radical process in TCH degradation, which could be attributed to the redox cycles between V⁵⁺, V⁴⁺ and V³⁺ in the presence of PMS to generate various radicals. This radical process enabled the E-VS₄/PMS system with a high activity in wide reaction conditions and high mineralization ratios in degrading various refractory organic pollutants within 10 min. In addition, the E-VS₄/PMS system exhibited favorable reusability and stability with very less V and S ions leaching, and showed excellent performance in real water purification.

A review of radical and non-radical degradation of amoxicillin by using different oxidation process systems

Pharmaceutical compounds have piqued the interest of researchers due to an increase in their demand, which increases the possibility of leakage into the environment. Amoxicillin (AMX) is a penicillin derivative used for the treatment of infections caused by gram-positive bacteria. AMX has a low metabolic rate in the human body, and around 80-90% is unmetabolized. As a result, AMX residuals should be treated immediately to avoid further accumulation in the environment. Advanced oxidation process techniques are an efficient way to degrade AMX. This review attempts to collect, organize, summarize, and analyze the most up to date research linked to the degradation of AMX by different advanced oxidation process systems including photocatalytic, ultrasonic, electro-oxidation, and advanced oxidation process-based on partials. The main topics investigated in this review are degradation mechanism, degradation efficiency, catalyst stability, the formation of AMX by-products and its toxicity, in addition, the influence of different experimental conditions was discussed such as pH, temperature, scavengers, the concentration of amoxicillin, oxidants, catalyst, and doping ratio. The degradation of AMX could be inhibited by very high values of pH, temperature, AMX concentration, oxidants concentration, catalyst concentration, and doping ratio. Several AMX by-products were discovered after oxidation treatment, and several of them had lower or same values of LC₅₀ (96 h) fathead minnow of AMX itself, such as m/z 384, 375, 349, 323, 324, 321, 318, with prediction values of 0.70, 1.10, 1.10 0.42, 0.42, 0.42, and 0.42 mg/L, respectively. We revealed that there is no silver bullet system to oxidize AMX from an aqueous medium. However, it is recommended to apply hybrid systems such as Photo-electro, Photo-Fenton, Electro-Fenton, etc. Hybrid systems are capable to cover the drawbacks of the single system. This review may provide important information, as well as future recommendations, for future researchers interested in treating AMX using various AOP systems, allowing them to improve the applicability of their systems and successfully oxidize AMX from an aqueous medium.

Contribution of filtration and photocatalysis to DOM removal and fouling mechanism during in-situ UV-LED photocatalytic ceramic membrane process

The use of ceramic membranes and ultraviolet light-emitting diodes (UV-LEDs) has advanced the application of photocatalytic membrane for water treatment. We systematically evaluated the contribution of filtration and photocatalysis to dissolved organic matter (DOM) removal and fouling mechanism during in-situ UV-LED photocatalytic ceramic membrane filtration. The results showed that physical rejection primarily led to removal of 4-15 kDa molecules and photocatalysis further increased the removal of 1-4 kDa molecules, causing small sized microbial humic-like or protein-like materials in the permeate. In-situ UV-LED photocatalysis had an excellent effect on membrane fouling mitigation regardless of DOM sources. The dominant fouling mechanism changed from partial blockage to gel layer formation with increasing Ca²⁺ concentration but did not change with UV treatment. Correlation analysis revealed that the removal of 1-4 kDa molecules contributed to the mitigation of both reversible and irreversible fouling resistance, and the small molecules were the major cause of irreversible fouling resistance. Removal of 1-4 kDa terrestrial humic acid-like contributed to the pore blockage mechanism for synthetic water. Removal of 4-15 kDa protein-like materials was closely correlated to the pore blockage mechanism for real water. Trihalomethanes (THMs) and haloacetic acids (HAAs) formation potential (FP) were both significantly reduced after photocatalytic ceramic membrane process, but precursors of nitrogenous disinfection by-products (N-DBPs) with high toxicity were not removed by filtration or by photocatalysis, which deserves attention. Membrane rejection made higher contribution to better DBPFP control than photocatalysis. This study provides novel insights into the impact of UV-LED on DOM removal, DBPFP control and fouling mitigation, promoting the development of photocatalytic ceramic membrane filtration.

Novel S-scheme 2D/2D Bi4O5Br2 nanoplatelets/g-C3N5 heterojunctions with enhanced photocatalytic activity towards organic pollutants removal

Removal of organic pollutants and pharma products in waste water using semiconductor photocatalysts has gained huge interest among recent days. However, low visible light absorption, recombination rate of charge carriers and less availability of reaction sites are still major obstacles for the photocatalysis process. Herein, an in situ-forming Bi₄O₅Br₂ nanosheets decorated on the surface g-C₃N₅ were prepared via simple hydrothermal method under ambient temperature. The basic pH condition plays a vital role in growing for Bi₄O₅Br₂ nanosheets. Various characterization studies such as TEM, SEM, PL and UV-DRS studies confirmed the formation of close contact between the Bi₄O₅Br₂ and g-C₃N₅ nanosheets. The construction of Bi₄O₅Br₂ nanoplatelets/g-C₃N₅ nanocomposite increases the surface-active sites and improving the separation efficiencies of excitons, which is greatly influenced in the degradation of ciprofloxacin and bisphenol-A pollutants. Meanwhile, the flow of electrons from the layered structured graphite carbon of g-C₃N₅ which enables excellent electrical contact in the heterojunction. Besides, the main free radicals were determined as e^- and ^•O₂^-, and production level of free radicals were confirmed by radical trapping experiments. The possible degradation mechanism was proposed and discussed. Finally, this work provides a unique approach to in-situ preparation of heterojunction photocatalysts and demonstrates the prepared Bi₄O₅Br₂ nanoplatelets/g-C₃N₅ photocatalysts have great potential in the waste water management.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Synthesis of new hybrid composite based on TiO2 for photo-catalytic degradation of sulfamethoxazole and pharmaceutical wastewater, optimization, performance, and reaction mechanism studies

In this study photo-catalytic degradation of sulfamethoxazole (SMX) from aqueous solutions using carbon quantum dot (CQD)-decorated Cu-TiO₂ was investigated. The as-prepared photo-catalyst samples were characterized by various FTIR, XRD, FE-SEM, TEM, EDX, BET, and DRS techniques. The investigation of effective photo-catalytic operational parameters confirmed that the complete removal of SMX (20 mg/L) can be accomplished at pH: 6.0 and light intensity: 75 mW/cm² over a 30-min reaction time. DRS analysis demonstrated adding CQD to the Cu-TiO₂ reduced its bandgap energy from 2.97 to 2.90 eV. The photo-catalytic degradation kinetics of SMX fit well with the pseudo-first-order model. The radical trapping experiment indicates that HO^• and O₂^•- active species were more effective species for SMX degradation, and the higher inhibition effect on the SMX degradation efficiency was assigned to O₂^•- ions. The water matrix species-inhibited effect in SMX removal was as follows: SO₄^2- > Cl^- > NO₃^- > CO₃^- > no ions. The synthesized photo-catalyst could be recycled after six consecutive cycles of SMX degradation with an insignificant decrease in performance. The total organic carbon (TOC) analysis suggested the mineralization of SMZ by composite photo-catalysts. The minimum inhibitory concentration (MIC) for Escherichia coli remained at 12.5 mg L^-1 SMX. A possible mechanism and pathway of SMX degradation in the photo-catalytic system was presented.

Enhanced photocatalytic activity of Fe2O3@ZnO decorated CQD for inactivation of Escherichia coli under visible light irradiation

The present study, magnetically separable Fe₂O₃@ZnO/CQD nanocomposite was successfully prepared via hydrothermal process and characterized with SEM-EDX, XRD, FTIR, VSM and DRS analysis. The effect of operational parameters includes photocatalyst dosage, photocatalyst type, CQD content and Escherichia coli (E. coli) concentration were evaluated on the E. coli inactivation. The disinfecting ability of nanocomposite components was obtained as Fe₂O₃@ZnO/CQD> Fe₂O₃@ZnO> ZnO> Fe₂O₃> CQD which shows a synergetic effect among different components. The highest E. coli inactivation rate (K_max=0.7606 min^-1) was obtained at photocatalyst dosage of 0.2 g/L and 15% CQD content. The MIC and MBC values value for E. coli were determined 0.1172 mg/mL and 0.4948 respectively that the results tests proved the antibacterial functions of the Fe₂O₃@ZnO/CQD. Nanocomposite showed the high reusability after 4 consecutive cycles, K_max decreased from 0.7606 min^-1 to 0.6181 min^-1. Quenching experiments showed ^•OH and h⁺ are the main reactive oxygen species involved in the E. coli inactivation.

Heterogeneous photo-Fenton degradation toward sulfonamide matrix over magnetic Fe3S4 derived from MIL-100(Fe)

Magnetic Fe₃S₄ was facilely derived from MIL-100(Fe) as the precursor and thioacetamide (TAA) as the sulfur source under hydrothermal condition. The as-prepared Fe₃S₄ was adopted as catalyst to promote the photo-Fenton process, in which sulfamethoxazole (SMX) was used as representative pollutant sample to test the oxidative degradation performance of Fe₃S₄. The results showed that Fe₃S₄ exhibited excellent photo-Fenton-like oxidation decomposition performances toward sulfamethoxazole (SMX) under both UV and visible light. A possible degradation mechanism over Fe₃S₄ in the photo-Fenton reaction is put forward based on quenching experiments and electron spin resonance (ESR). About 41% total organic carbon (TOC) removal efficiency of sulfamethoxazole (SMX) over the as-prepared Fe₃S₄ can be accomplished within 40 min. As well, different sulfonamide antibiotics (SAs) like sulfamethoxazole (SMX), sulfisoxazole (SIM) and sulfadiazine (SDZ) were selected to further investigate the oxidative degradation activity of Fe₃S₄ in this photo-Fenton-like reaction system, in which the possible degradation pathways of SMX, SIM and SDZ were put forward based on UHPLC-MS analysis. This work provided a new strategy to prepare magnetic Fe₃S₄ as catalyst for advanced oxidation process, which can be easily separated from the treated water samples to accomplish facile recovery and recyclability.

Visible light photodegradation of organic dyes using electrochemically synthesized MoO3/ZnO

In this study, flake-like MoO₃-ZnO composite was prepared using a simple and robust electrochemical setup. The composite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, photoluminescence, zeta potential analysis, and electrochemical impedance study. The modified ZnO shows a remarkable catalytic activity towards the photodegradation of three potentially hazardous dyes, malachite green, crystal violet, and methylene blue. More than 95% of both malachite green and crystal violet degraded within 140 min under visible light irradiation. Scavenger studies reveal that OH· radicals produced by the photo-separated charges on MoO₃-ZnO are responsible for the degradation of all three dyes. The photoactive charge carriers show less recombination rate as evidenced by the photoluminescence spectrum due to the interparticle charge migration process. This work suggests a new versatile procedure for the synthesis of MoO₃-ZnO composites and establishes its photocatalytic efficacy under visible light with three common pollutant dyes found in wastewater.

Could co-substrate sodium acetate simultaneously promote Chlorella to degrade amoxicillin and produce bioresources?

Integrating microalgae culture and wastewater purification is a promising technology for sustainable bioresource production. However, the challenge is that toxins in wastewater usually limit risk elimination and cause poor bioresource production. Easy-to-biodegrade substrates could alleviate the resistant stress on a bacterial community but we know little about how they function with microalgae. In this study, we tested if Easy-to-biodegrade substrates could simultaneously promote Chlorella to degrade antibiotic amoxicillin (AMO) and produce bioresources. Sodium acetate (NaAC) was used as the representative co-substrate. The results showed NaAC could enhance AMO removal by 76%. The β-lactam structure was destroyed and detoxified to small molecules, due to the up-regulation of hydrolase, oxidoreductase, reductase, and transferase. Chlorella biomass production increased by 36%. The genes encoding the glutathione metabolism and peroxisome pathways were significantly up-regulated to alleviate the antibiotic stress, and the DNA replication pathway was activated. As a result, the production of lipid, carbohydrate, and protein was enhanced by 61%, 122%, and 34%, respectively. This study provides new insights for using microalgae to recover bioresources from toxic wastewater and reveals the critical underlying mechanisms.

Construction of visible-light driven Bi2MoO6-rGO-TiO2 photocatalyst for effective ofloxacin degradation

Photocatalytic removal is more appropriate for the destruction of organic contaminants. The ternary Bi₂MoO₆-reduced graphene oxide (rGO)-TiO₂ catalyst was synthesized using a simple hydrothermal method, and various surface analytical optical techniques were analyzed. The photocatalytic decomposition efficiency of the Bi₂MoO₆-rGO-TiO₂ composite was 92.3% higher than those of pure and binary photocatalysts. The effects of operational parameters, such as catalyst ratio, catalyst variation, rGO ratio variation, and pH value variation were also analyzed. The as-prepared ternary photocatalyst exhibited low photoluminescence and high photocurrent density, which suppressed photon-induced electron and hole (h⁺) recombination and effective charge separation. The study demonstrated that rGO has excellent electron transfer performance and enhanced photocatalytic reaction stability. The perfect cycling stability of Bi₂MoO₆-rGO-TiO₂ was retained even after five consecutive cycles on the photocatalytic degradation reaction performance. In this study, we propose a decomposition performance mechanism for ofloxacin degradation that underwent visible-light irradiation.

FeVO4 Nanopolyhedron Photoelectrodes for Stable and Efficient Water Splitting

Crystalline FeVO₄ nanopolyhedron (FVO NPH) photoelectrodes are successfully prepared by using an in situ solid-state transformation from hydrothermal FeOOH films via adding vanadium precursor and following thermal treatments. The FVO NPH photoelectrodes possess uniformly dispersed polyhedral nanocrystals that directly grow on the conductive substrate with tunable film thicknesses. The unique morphology enables an outstanding photo-electrocatalytic performance, and the optimized FVO NPH photoelectrode, which was annealed at 550 °C for 4 h with a film thickness of ∼560 nm, exhibits excellent photocurrent densities of ∼0.47 and ∼0.68 mA cm^-2 at 1.0 and 1.2 V vs. Ag/AgCl, respectively. After decorating CoPi co-catalyst, FVO/CoPi shows a highly efficient water splitting performance with O₂ and H₂ evolution rates of 7.53 and 15.32 μmol cm^-2  h^-1 , respectively, which are ∼1.88 and ∼1.80 times, respectively, of these of the FVO NPH. The proposed photoelectrodes also show excellently chemical and physical stabilities in solar water splitting. This is the first time reported the preparation of well-organized nanostructured FeVO₄ films, which warrants further optimization studies on morphologies and compositions of FeVO₄ -based photoelectrodes.

The degradation pathways of carbamazepine in advanced oxidation process: A mini review coupled with DFT calculation

Degradation pathway is important for the study of carbamazepine (CBZ) removal in advanced oxidation processes (AOPs). Generally, degradation pathways are speculated based on intermediate identification and basic chemical rules. However, this semiempirical strategy is sometimes time-consuming and baseless. To improve the situation, a mini meta-analysis was first conducted for the degradation pathways of CBZ in AOPs. Then, the rationality of the pathways was analyzed by Density Functional Theory (DFT) calculation. Results show that the degradation pathways of CBZ in various AOPs has high similarity, and the reactive sites predicted by Fukui function fitted well with the data retrieved from literatures. In addition, molecule configuration of degradation intermediates was found to play a very important roles on degradation pathway. The study reveals that computational chemistry is a useful tool for degradation pathway speculation in AOPs.

Removal of Pharmaceuticals from Water by Adsorption and Advanced Oxidation Processes: State of the Art and Trends

Pharmaceutical products have become a necessary part of life. Several studies have demonstrated that indirect exposure of humans to pharmaceuticals through the water could cause negative effects. Raw sewage and wastewater effluents are the major sources of pharmaceuticals found in surface waters and drinking water. Therefore, it is important to consider and characterize the efficiency of pharmaceutical removal during wastewater and drinking-water treatment processes. Various treatment options have been investigated for the removal/reduction of drugs (e.g., antibiotics, NSAIDs, analgesics) using conventional or biological treatments, such as activated sludge processes or bio-filtration, respectively. The efficiency of these processes ranges from 20–90%. Comparatively, advanced wastewater treatment processes, such as reverse osmosis, ozonation and advanced oxidation technologies, can achieve higher removal rates for drugs. Pharmaceuticals and their metabolites undergo natural attenuation by adsorption and solar oxidation. Therefore, pharmaceuticals in water sources even at trace concentrations would have undergone removal through biological processes and, if applicable, combined adsorption and photocatalytic degradation wastewater treatment processes. This review provides an overview of the conventional and advanced technologies for the removal of pharmaceutical compounds from water sources. It also sheds light on the key points behind adsorption and photocatalysis.

Photo-catalytic degradation of bisphenol-a from aqueous solutions using GF/Fe-TiO2-CQD hybrid composite

In this photocatalytic study, removal of bisphenol-A from aqueous solution was studied using the GF/Fe-TiO2-CQD composite. Due to its health and environmental effects, this compound should be disposed of sources that are mainly industrial wastewater. The phis-chemical properties of the composite were determined by traditional analyzes of EF-SEM, EDX, BET, XRD, FTIR and DRS. In this study, different ratios of CQD in the composite (1.5, 4.5 and 7.5 wt%), pH, and bisphenol-A concentration as variable parameters were investigated. All analyzes, EF-SEM, EDX, BET, XRD, FTIR, show that the GF/Fe-TiO2-CQD composite is well coated on glass fibers (GF) and all the elements in the catalyst are present. On the other hand, DRS analysis showed that CQD reduces the band gap of Fe-TiO2 from 2.96 eV to 2.91 eV, it was 3.10 eV for TiO2. Among different catalysts, GF/Fe-TiO2-CQD4.5wt% has the best performance. The results showed that for GF/Fe-TiO2-CQD4.5wt%, optimum for the process was at pH = 6 in low concentration of bisphenol-A. The first order model for the photocatalytic degradation process were well studied. In addition, GF/Fe-TiO2-CQD4.5wt% showed that it can be used many times with a minimal reduction in performance. As a result, the GF/Fe-TiO2-CQD4.5wt% composite can successfully remove bisphenol-A form in synthetic aqueous solution. However, it is necessary to further studies to applied that for real water source in water and wastewater treatment plants.

Improving the charge properties of the WO3 photoanode using a BiFeO3 ferroelectric nanolayer

Tungstic oxide (WO₃) is a promising visible-light-responsive photoanode material, but it has poor charge transport and collection properties. In this study, a WO₃/BiFeO₃ core/shell photoanode (WO₃/BFO) with enhanced photoelectrochemical (PEC) performance was successfully prepared using a facile spin-coating method. The optimal WO₃/BFO shows an excellently enhanced and stable photocurrent density of ∼2.83 mA cm^-2 at 0.6 V vs. Ag/AgCl, which is ∼244% more than WO₃ under AM 1.5 illumination. The results of Mott-Schottky tests, intensity modulated photoelectrochemical spectroscopy and transient photocurrent decay indicated that the BFO ferroelectric nanolayer significantly enhances the charge density of the WO₃/BFO, and improves its charge transport and separation property and charge lifetime, which could be the reason for the enhanced PEC activity of WO₃/BFO.

You Don't Learn That in School: An Updated Practical Guide to Carbon Quantum Dots

Carbon quantum dots (CQDs) have started to emerge as candidates for application in cell imaging, biosensing, and targeted drug delivery, amongst other research fields, due to their unique properties. Those applications are possible as the CQDs exhibit tunable fluorescence, biocompatibility, and a versatile surface. This review aims to summarize the recent development in the field of CQDs research, namely the latest synthesis progress concerning materials/methods, surface modifications, characterization methods, and purification techniques. Furthermore, this work will systematically explore the several applications CQDs have been subjected to, such as bioimaging, fluorescence sensing, and cancer/gene therapy. Finally, we will briefly discuss in the concluding section the present and future challenges, as well as future perspectives and views regarding the emerging paradigm that is the CQDs research field.

Pre-accumulation and in-situ destruction of diclofenac by a photo-regenerable activated carbon fiber supported titanate nanotubes composite material: Intermediates, DFT calculation, and ecotoxicity

Pharmaceuticals and personal care products (PPCPs) have been widely detected in ecosystems. However, effective water purification technologies for PPCPs degradation are lacking. In this work, an active activated carbon fiber supported titanate nanotubes (TNTs@ACF) composite was synthesized via one-step hydrothermal process, which was applied for adsorption and photocatalytic degradation of PPCPs under simulated solar light. Characterizations indicated that the successful grafting of TNTs onto ACF was achieved and surface modification occurred. Diclofenac (DCF, a model PPCPs) was rapidly adsorbed onto TNTs@ACF, and subsequently photodegraded (98.8 %) under solar light within 2 h. TNTs@ACF also performed well over a wide range of pH, and was resistant to humic acid. The good adsorption and photocatalytic activity of TNTs@ACF was attributed to the well-defined hybrid structure, enabling corporative adsorption of DCF by TNTs and ACF, and extending the light absorbance to visible region. Furthermore, the description of degradation pathway and evaluation of ecotoxicity for DCF and its intermediates/byproduct were proposed based on experimental analysis, density functional theory (DFT) calculation and quantitative structure-activity relationship (QSAR) analysis, respectively, indicating the photocatalytic degradation of DCF can offer the step-by-step de-toxicity. Our study is expected to offer new strategy as "pre-accumulation and in-situ destruction" for environmental application.

A concentrate-and-destroy technique for degradation of perfluorooctanoic acid in water using a new adsorptive photocatalyst

Per- and polyfluoroalkyl substances (PFAS) have emerged as a major concern in aquatic systems worldwide due to their widespread applications and health concerns. Perfluorooctanoic acid (PFOA) is one of the most-detected PFAS. Yet, a cost-effective technology has been lacking for the degradation of PFAS due to their resistance to conventional treatment processes. To address this challenge, we prepared a novel adsorptive photocatalyst, referred to Fe/TNTs@AC, based on low-cost commercial activated carbon (AC) and TiO₂. The composite material exhibited synergistic adsorption and photocatalytic activity and enabled a novel "concentrate-&-destroy" strategy for rapid and complete degradation of PFOA in water. Fe/TNTs@AC was able to adsorb PFOA within a few minutes, thereby effectively concentrating the target contaminant on the photoactive sites. Subsequently, Fe/TNTs@AC was able to degrade >90% of PFOA that was preconcentrated on the solid in 4 h under UV irradiation (254 nm, 21 mW cm^‒2), of which 62% was completely mineralized to F^-. The efficient photodegradation also regenerated Fe/TNTs@AC, eliminating the need for expensive chemical regenerants, and after six cycles of adsorption/photodegradation, the material showed no significant drop in adsorption capacity or photocatalytic activity. Simulations based on the density functional theory (DFT) revealed that Fe/TNTs@AC adsorbs PFOA in the side-on parallel mode, facilitating the subsequent photocatalytic degradation of PFOA. According to the DFT analysis, scavenger tests, and analysis of degradation intermediates, PFOA decomposition is initiated by direct hole oxidation, which activates the molecule and leads to a series of decarboxylation, C-F bond cleavage, and chain shortening reactions. The innovative "concentrate-&-destroy" strategy may significantly advance conventional adsorption or photochemical treatment of PFAS-contaminated water and holds the potential to degrade PFOA, and potentially other PFAS, more cost-effectively.

Degradation of atrazine in aqueous solution through peroxymonosulfate activated by Co-modified nano-titanium dioxide

Peroxymonosulfate (PMS) heterogeneous activation by Co₃ O₄ -modified catalyst has shown significant implications to generate free radicals for organic pollutants degradation in water. In this study, PMS heterogeneous activation was applied to degrade atrazine (ATZ) using Co₃ O₄ -mediated titanium dioxide nanoparticles (Co₃ O₄ /TiO₂ NPs), which were synthesized by sol-gel method. Firstly, characteristics of the fresh and used Co₃ O₄ /TiO₂ NPs were analyzed via SEM, TEM, XRD, EDS, and XPS techniques. Then, the influences of several key parameters (i.e., Co₃ O₄ /TiO₂ NPs dose (0.02-0.3 g/L), PMS dose (0-0.6 mM), initial pH (3.0-11.0), and co-existing anions) on the ATZ degradation were investigated systematically. Besides, control systems were set up to verify the high efficiency of Co₃ O₄ /TiO₂ NPs. In addition, the radical scavenging experiments revealed that sulfate and hydroxyl radicals were generated in the Co₃ O₄ /TiO₂ -PMS system, while sulfate radicals were the dominant reactive species responsible for ATZ degradation. Furthermore, the stability and reusability of the Co₃ O₄ /TiO₂ NPs were investigated after four consecutive experiments. Based on the identified products, possible degradation pathways of ATZ in the Co₃ O₄ /TiO₂ -PMS system were proposed. Finally, the possible reaction mechanism of Co₃ O₄ /TiO₂ -PMS system was proposed according to the comprehensive analysis. Findings of this study provided useful information for the application of Co₃ O₄ /TiO₂ NPs in recalcitrant organic contaminants degradation. PRACTITIONER POINTS: Co₃ O₄ /TiO₂ NPs were synthesized via the simple sol-gel method. Co₃ O₄ /TiO₂ NPs possessed excellent catalytic performance for PMS to eliminate ATZ. Sulfate radicals play a dominant role in the degradation of ATZ. ATZ degradation pathways and reaction mechanism in the system were proposed.