Antibiotics degradation by advanced oxidation process (AOPs): Recent advances in ecotoxicity and antibiotic-resistance genes induction of degradation products

A review on the alternatives to antibiotics and the treatment of antibiotic pollution: Current development and future prospects

Antibiotics, widely used in the fields of medicine, animal husbandry, aquaculture, and agriculture, pose a serious threat to the ecological environment and human health. To prevent antibiotic pollution, efforts have been made in recent years to explore alternative options for antibiotics in animal feed, but the effectiveness of these alternatives in replacing antibiotics is not thoroughly understood due to the variation from case to case. Furthermore, a systematic summary of the specific applications and limitations of antibiotic removal techniques in the environment is crucial for developing effective strategies to address antibiotic contamination. This comprehensive review summarized the current development and potential issues on different types of antibiotic substitutes, such as enzyme preparations, probiotics, and plant extracts. Meanwhile, the existing technologies for antibiotic residue removal were discussed under the scope of application and limitation. The present work aims to highlight the strategy of controlling antibiotics from the source and provide valuable insights for green and efficient antibiotic treatment.

One-pot synthesis of NiCo-phyllosilicate supported on zeolite for enhanced degradation of antibiotic contaminants

The overuse of antibiotics currently results in the presence of various antibiotics being detected in water bodies, which poses potential risks to human health and the environment. Therefore, it is highly significant to remove antibiotics from water. In this study, we developed novel rod-like NiCo-phyllosilicate hybrid catalysts on calcined natural zeolite (NiCo@C-zeolite) via a facile one-pot process. The presence of the zeolite served as both a silicon source and a support, maintaining a high specific surface area of the NiCo@C-zeolite. Remarkably, NiCo@C-zeolite exhibited outstanding catalytic performance in antibiotic degradation under PMS activation. Within just 5 min, the degradation rate of metronidazole (MNZ) reached 96.14%, ultimately achieving a final degradation rate of 99.28%. Furthermore, we investigated the influence of catalyst dosage, PMS dosage, MNZ concentration, initial pH value, and various inorganic anions on the degradation efficiency of MNZ. The results demonstrated that NiCo@C-zeolite displayed outstanding efficacy in degrading MNZ under diverse conditions and maintained a degradation rate of 94.86% at 60 min after three consecutive cycles of degradation. Free radical quenching experiments revealed that SO•-4played a significant role in the presence of NiCo@C-zeolite-PMS system. These findings indicate that the novel rod-like NiCo-phyllosilicate hybrid catalysts had excellent performance in antibiotic degradation.

Machine learning-powered estimation of malachite green photocatalytic degradation with NML-BiFeO3 composites

This study explores the potential of photocatalytic degradation using novel NML-BiFeO3 (noble metal-incorporated bismuth ferrite) compounds for eliminating malachite green (MG) dye from wastewater. The effectiveness of various Gaussian process regression (GPR) models in predicting MG degradation is investigated. Four GPR models (Matern, Exponential, Squared Exponential, and Rational Quadratic) were employed to analyze a dataset of 1200 observations encompassing various experimental conditions. The models have considered ten input variables, including catalyst properties, solution characteristics, and operational parameters. The Exponential kernel-based GPR model achieved the best performance, with a near-perfect R2 value of 1.0, indicating exceptional accuracy in predicting MG degradation. Sensitivity analysis revealed process time as the most critical factor influencing MG degradation, followed by pore volume, catalyst loading, light intensity, catalyst type, pH, anion type, surface area, and humic acid concentration. This highlights the complex interplay between these factors in the degradation process. The reliability of the models was confirmed by outlier detection using William's plot, demonstrating a minimal number of outliers (66-71 data points depending on the model). This indicates the robustness of the data utilized for model development. This study suggests that NML-BiFeO3 composites hold promise for wastewater treatment and that GPR models, particularly Matern-GPR, offer a powerful tool for predicting MG degradation. Identifying fundamental catalyst properties can expedite the application of NML-BiFeO3, leading to optimized wastewater treatment processes. Overall, this study provides valuable insights into using NML-BiFeO3 compounds and machine learning for efficient MG removal from wastewater.

Nitrogen-doped metal-free granular activated carbons as economical and easily separable catalysts for peroxymonosulfate and hydrogen peroxide activation to degrade bisphenol A

The fabrication of low-cost, highly efficient, environmentally friendly, and easily separable metal-free heterogeneous catalysts for environmental remediation remains a challenge. In this study, granular nitrogen-doped highly developed porous carbons with a particle size of 0.25-0.30 mm were prepared by preoxidation and subsequent NH3 modification of a commercially available coconut-based activated carbon, and used to activate peroxymonosulphate (KHSO5) or hydrogen peroxide (H2O2) to degrade bisphenol A (BPA). The nitrogen-doped carbon (ACON-950) prepared by NH3 modification at 950 °C, with the addition of only 0.15 g/L could remove 100% of 50 mg/L BPA in 150 min, and more than 90% of the removed BPA was due to degradation. The removal rates of total organic carbon of ACON-950/KHSO5 and ACON-950/H2O2 systems reached 60.4% and 66.2% respectively, indicating the excellent catalytic activity of ACON-950. The reaction rate constant was significantly positively correlated with the absolute content of pyridinic N (N-6) and graphitic N (N-Q) and negatively and weakly positively correlated with pyrrolic N (N-5) and defects. Quenching experiments combined with electron paramagnetic resonance demonstrated that singlet oxygen was the dominant reactive oxidative species for BPA degradation. ACON-950 was characterized before and after the degradation reaction using N2 adsorption-desorption analyzer, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The results confirmed the prominent contribution of both the N-6 and N-Q to the catalytic performance of nitrogen-doped carbons. The reusability of ACON-950 and its application in actual water bodies further demonstrated its remarkable potential for the remediation of organic pollutants in wastewater.

Affecting factors and mechanism of removing antibiotics and antibiotic resistance genes by nano zero-valent iron (nZVI) and modified nZVI: A critical review

Antibiotics and antibiotic resistance genetic pollution have become a global environmental and health concern recently, with frequent detection in various environmental media. Therefore, finding ways to control antibiotics and antibiotic resistance genes (ARGs) is urgently needed. Nano zero-valent iron (nZVI) has shown a positive effect on antibiotics degradation and restraining ARGs, making it a promising solution for controlling antibiotics and ARGs. However, given the current increasingly fragmented research focus and results, a comprehensive review is still lacking. In this work, we first introduce the origin and transmission of antibiotics and ARGs in various environmental media, and then discuss the affecting factors during the degradation of antibiotics and the control of ARGs by nZVI and modified nZVI, including pH, nZVI dose, and oxidant concentration, etc. Then, the mechanisms of antibiotic and ARGs removal promoted by nZVI are also summarized. In general, the mechanism of antibiotic degradation by nZVI mainly includes adsorption and reduction, while promoting the biodegradation of antibiotics by affecting the microbial community. nZVI can also be combined with persulfates to degrade antibiotics through advanced oxidation processes. For the control of ARGs, nZVI not only changes the microbial community structure, but also affects the proliferation of ARGs through affecting the fate of mobile genetic elements (MGEs). Finally, some new ideas on the application of nZVI in the treatment of antibiotic resistance are proposed. This paper provides a reference for research and application in this field.

Mediated Peroxymonosulfate Activation at the Single Atom Fe-N3 O1 Sites: Synergistic Degradation of Antibiotics by Two Non-Radical Pathways

The activation of persulfates to degrade refractory organic pollutants is a hot issue in advanced oxidation right now. Here, it is reported that single-atom Fe-incorporated carbon nitride (Fe-CN-650) can effectively activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. Through some characterization techniques and DFT calculation, it is proved that Fe single atoms in Fe-CN-650 exist mainly in the form of Fe-N3 O1 coordination, and Fe-N3 O1 exhibited better affinity for PMS than the traditional Fe-N4 structure. The degradation rate constant of SMX in the Fe-CN-650/PMS system reached 0.472 min-1 , and 90.80% of SMX can still be effectively degraded within 10 min after five consecutive recovery cycles. The radical quenching experiment and electrochemical analysis confirm that the pollutants are mainly degraded by two non-radical pathways through 1 O2 and Fe(IV)═O induced at the Fe-N3 O1 sites. In addition, the intermediate products of SMX degradation in the Fe-CN-650/PMS system show toxicity attenuation or non-toxicity. This study offers valuable insights into the design of carbon-based single-atom catalysts and provides a potential remediation technology for the optimum activation of PMS to disintegrate organic pollutants.

Construction of p-n-p nano heterojunction through coupling La2O3, (BiO)2CO3 and Ag3PO4 for effective photocatalytic degradation of doxycycline: Insights into mechanism, pathway and intermediate toxicity evaluation

The present work is centred around the development of La2O3/(BiO)2CO3/Ag3PO4 (LBA), a p-n-p nano-heterojunction to photodegrade doxycycline under visible light irradiation. Here, ultrasonication assisted co-precipitation method was employed to synthesize the photocatalyst. The photocatalyst was characterized using different analysis such as SEM, TEM, elemental mapping, XRD, XPS, FTIR, Raman, BET, DRS, PL and EIS which confirmed the successful fabrication of LBA and their excellent ability to refrain the e-/h+ recombination owing to the construction of the heterojunction. LBA was found to degrade DOX by 91.75 % with the high mineralization of 87.23%. The impact of the reaction parameters influencing the photodegradation process including the concentration of the NCs and DOX, pH and the influence of the commonly present anions were studied. The stability and reusability of the LBA was assessed through subjecting it to four cycles of photodegradation of DOX. In addition, the recovered LBA was characterized through XPS and XRD analysis to confirm the particles stability and reusability. The active participation of the photogenerated charges and the reactive oxygen species were identified through the scavenging assay and ESR analysis. Further, GC-MS/MS analysis was performed to put forward a plausible photodegradation pathway. The toxicity of the end products as well as the intermediates was predicted through ECOSAR software.

Unravelling the enhanced rifampicin photocatalytic degradation over green-synthesized SrO2@SnIn4S8 p-n heterojunction: Pathway, toxicity evaluation and mechanistic insights

In recent years, the discharge of pharmaceutical drugs into aquatic ecosystems has become a growing concern, posing a significant threat to aquatic life. In response to this environmental challenge, advanced oxidation processes have gained prominence in wastewater treatment due to their efficacy in eliminating pharmaceutical pollutants and their potential for reusability. In this study, we have fabricated SnIn4S8 coupled SrO2 nano-heterojunction (NH) using a greener co-precipitation approach using leaf extract derived from Acaphyla wilkesiana. The resulting NH exhibited exceptional photocatalytic activity against rifampicin (RIF), achieving a remarkable 97.4% degradation under visible light, surpassing the performance of its individual components. The morphological characteristics of the NH were thoroughly analyzed through SEM, TEM, XRD, and XPS techniques, while EIS, DRS, and BET techniques provided valuable insights into its photocatalytic and optical properties. Furthermore, radical scavenging assays and ESR analysis identified hydroxyl radicals (•OH) and superoxide radicals (O2•-) were the species contributing to the visible light-driven photocatalytic degradation. The study also elucidated the potential degradation pathways and intermediates of RIF through GC-MS analysis. Additionally, the toxicity of the produced intermediates was assessed using the ECOSAR model. The findings have significant implications for the treatment of pharmaceutical pollutants and underscore the importance of eco-friendly synthesis methods in addressing environmental challenges.

Decomposition of metal-organic complexes and metal recovery in wastewater: A systematic review and meta-synthesis

Metals are rarely found as free ions in natural and anthropogenic environments, but they are often associated with organic matter and minerals. Under the context of circular economy, metals should be recycled, yet they are difficult to extract for their complex forms in real situations. Based on the protocols of review methodology and the analysis of VOS viewer, there are few reviews on the properties of metal-organic complexes, decomplexation methods, the effect of coexisting ions, the pH influence, and metal recovery methods for the increasingly complicated metal-organic complexes wastewater. Conventional treatment methods such as flocculation, adsorption, biological degradation, and ion exchange fail to decompose metal-organic complexes completely without causing secondary pollution in wastewater. To enhance comprehension of the behavior and morphology exhibited by metal-organic complexes within aqueous solutions, we presented the molecular structure and properties of metal-organic complexes, the decomplexation mechanisms that encompassed both radical and non-radical oxidizing species, including hydroxyl radical (OH), sulfate radical (SO˙4-), superoxide radical (O˙2-), hydrogen peroxide (H2O2), ozone (O3), and singlet oxygen (1O2). More importantly, we reviewed novel aspects that have not been covered by previous reviews considering the impact of operational parameters and coexisting ions. Finally, the potential avenues and challenges were proposed for future research.

Efficacy of new generation biosorbents for the sustainable treatment of antibiotic residues and antibiotic resistance genes from polluted waste effluent

Antimicrobials are frequently used in both humans and animals for the treatment of bacterially-generated illnesses. Antibiotic usage has increased for more than 40% from last 15 years globally per day in both human populations and farm animals leading to the large-scale discharge of antibiotic residues into wastewater. Most antibiotics end up in sewer systems, either directly from industry or healthcare systems, or indirectly from humans and animals after being partially metabolized or broken down following consumption. To prevent additional antibiotic compound pollution, which eventually impacts on the spread of antibiotic resistance, it is crucial to remove antibiotic residues from wastewater. Antibiotic accumulation and antibiotic resistance genes cannot be effectively and efficiently eliminated by conventional sewage treatment plants. Because of their high energy requirements and operating costs, many of the available technologies are not feasible. However, the biosorption method, which uses low-cost biomass as the biosorbent, is an alternative technique to potentially address these problems. An extensive literature survey focusing on developments in the field was conducted using English language electronic databases, such as PubMed, Google Scholar, Pubag, Google books, and ResearchGate, to understand the relative value of the available antibiotic removal methods. The predominant techniques for eliminating antibiotic residues from wastewater were categorized and defined by example. The approaches were contrasted, and the benefits and drawbacks were highlighted. Additionally, we included a few antibiotics whose removal from aquatic environments has been the subject of extensive research. Lastly, a few representative publications were identified that provide specific information on the removal rates attained by each technique. This review provides evidence that biosorption of antibiotic residues from biological waste using natural biosorbent materials is an affordable and effective technique for eliminating antibiotic residues from wastewater.

Advanced oxidation and biological integrated processes for pharmaceutical wastewater treatment: A review

The stress of pharmaceutical and personal care products (PPCPs) discharging to water bodies and the environment due to increased industrialization has reduced the availability of clean water. This poses a potential health hazard to animals and human life because water contamination is a great issue to the climate, plants, humans, and aquatic habitats. Pharmaceutical compounds are quantified in concentrations ranging from ng/Lto μg/L in aquatic environments worldwide. According to (Alsubih et al., 2022), the concentrations of carbamazepine, sulfamethoxazole, Lutvastatin, ciprofloxacin, and lorazepam were 616-906 ng/L, 16,532-21635 ng/L, 694-2068 ng/L, 734-1178 ng/L, and 2742-3775 ng/L respectively. Protecting and preserving our environment must be well-driven by all sectors to sustain development. Various methods have been utilized to eliminate the emerging pollutants, such as adsorption and biological and advanced oxidation processes. These methods have their benefits and drawbacks in the removal of pharmaceuticals. Successful wastewater treatment can save the water bodies; integrating green initiatives into the main purposes of actor firms, combined with continually periodic awareness of the current and potential implications of environmental/water pollution, will play a major role in water conservation. This article reviews key publications on the adsorption, biological, and advanced oxidation processes used to remove pharmaceutical products from the aquatic environment. It also sheds light on the pharmaceutical adsorption capability of adsorption, biological and advanced oxidation methods, and their efficacy in pharmaceutical concentration removal. A research gap has been identified for researchers to explore in order to eliminate the problem associated with pharmaceutical wastes. Therefore, future study should focus on combining advanced oxidation and adsorption processes for an excellent way to eliminate pharmaceutical products, even at low concentrations. Biological processes should focus on ideal circumstances and microbial processes that enable the simultaneous removal of pharmaceutical compounds and the effects of diverse environments on removal efficiency.

Kinetic constants and transformation products of ornidazole during ozonation

Ornidazole (ONZ), a nitroimidazole antibiotic detected in water bodies, may negatively impact the aquatic ecosystem. Its reaction kinetics during ozonation which is a feasible and applicable technology to control the contamination of emerging contaminants, however, has not been reported in literature. In this study, we measured the apparent second-order kinetic constant of ONZ with ozone molecules via the excessive ozone method and the competing method which led to an average value of 103.8 ± 2.7 M-1 s-1 at pH 7. The apparent second-order kinetic constant of ONZ with HO• was calculated to be 4.65 × 109 M-1 s-1 with the concept of Rct measured via para-chlorobenzoic acid as a probe. The transformation products (TPs) of ONZ during ozonation at pH 3 and pH 11 were separately analyzed with HPLC-MS/MS and some unique products were found at pH 11, reflecting the influence of HO•. The toxicity of individual TPs was predicted with the tool of T.E.S.T. It was found that 62% of 21 identified TPs could be more toxic than ONZ in terms of at least one acute toxicity endpoint, including chlorinated amines and N-oxides. The analysis with a respirometer further revealed that the toxicity of mixing TPs generated at HO• rich conditions was slightly lower than O3 dominated conditions. In general, this study provides the basic kinetic data for designing ozonation processes to eliminate ONZ and the important reference for understanding the toxicity evolution of ONZ during ozonation.

Facile Synthesis of Carbon-Based Inks to Develop Metal-Free ORR Electrocatalysts for Electro-Fenton Removal of Amoxicillin

The electro-Fenton process is based on the generation of hydroxyl radicals (OH•) from hydroxide peroxide (H2O2) generated in situ by an oxygen reduction reaction (ORR). Catalysts based on carbon gels have aroused the interest of researchers as ORR catalysts due to their textural, chemical and even electrical properties. In this work, we synthesized metal-free electrocatalysts based on carbon gels doped with graphene oxide, which were conformed to a working electrode. The catalysts were prepared from organic-gel-based inks using painted (brush) and screen-printed methods free of binders. These new methods of electrode preparation were compared with the conventional pasted method on graphite supports using a binder. All these materials were tested for the electro-Fenton degradation of amoxicillin using a homemade magnetite coated with carbon (Fe3O4/C) as a Fenton catalyst. All catalysts showed very good behavior, but the one prepared by ink painting (brush) was the best one. The degradation of amoxicillin was close to 90% under optimal conditions ([Fe3O4/C] = 100 mg L-1, -0.55 V) with the catalyst prepared using the painted method with a brush, which had 14.59 mA cm-2 as JK and a H2O2 electrogeneration close to 100% at the optimal voltage. These results show that carbon-gel-based electrocatalysts are not only very good at this type of application but can be adhered to graphite free of binders, thus enhancing all their catalytic properties.

Enhanced Degradation of Levofloxacin through Visible-Light-Driven Peroxymonosulfate Activation over CuInS2/g-C3N4 Heterojunctions

In this work, the heterojunctions of CuInS2 embedded in the g-C3N4 materials (xCuInS2/g-C3N4, abbreviated as xCIS/GCN) was successfully prepared for peroxymonosulfate (PMS) activation under visible light. The catalysts are characterized by different techniques, such as XRD, FTIR, SEM, TEM, and UV-vis. The unique heterojunction composites can suppress the recombination of photogenerated pairs. The catalytic results showed that the 3CIS/GCN exhibited excellent catalytic levofloxacin (LVF) degradation efficiency, while more than 98.9% of LVF was removed in 60 min over a wide pH range. SO4•-, O2•-, OH•, and 1O2 were verified as the main reactive species for LVF degradation via the quenching experiments and electron paramagnetic resonance technology (EPR). The synergetic effect of xCIS/GCN, PMS, and visible light irradiation was discussed. The possible LVF degradation pathway was proposed through byproducts analysis (LC-MS). Moreover, the 3CIS/GCN/vis-PMS system has very low metal leaching. Owing to xCIS/GCN having good properties for PMS activation, it has potential applications for LVF or other hazardous pollutants degradation.

Activation of Peracetic Acid by CoFe2O4 for Efficient Degradation of Ofloxacin: Reactive Species and Mechanism

Peroxyacetic acid (PAA)-based advanced oxidation processes (AOPs) have attracted much attention in wastewater treatment by reason of high selectivity, long half-life reactive oxygen species (ROS), and wider applicability. In this study, cobalt ferrite (CoFe2O4) was applied to activate PAA for the removal of ofloxacin (OFX). The degradation of OFX could reach 83.0% via the CoFe2O4/PAA system under neutral conditions. The low concentration of co-existing anions and organic matter displayed negligible influence on OFX removal. The contributions of hydroxyl radicals (·OH), organic radicals (R-O·), and other reactive species to OFX degradation in CoFe2O4/PAA were systematically evaluated. Organic radicals (especially CH3C(O)OO·) and singlet oxygen (1O2) were verified to be the main reactive species leading to OFX destruction. The Co(II)/Co(III) redox cycle occurring on the surface of CoFe2O4 played a significant role in PAA activation. The catalytic performance of CoFe2O4 remained above 80% after five cycles. Furthermore, the ecotoxicity of OFX was reduced after treatment with the CoFe2O4/PAA system. This study will facilitate further research and development of the CoFe2O4/PAA system as a new strategy for wastewater treatment.

Sustainable production of Fe-doped MnO2 nanoparticles for accelerated tetracycline antibiotic detoxification

Manganese dioxide (MnO2) has been recognized as one of the natural systems' most active mineral oxidants. However, when it comes to catalytic oxidation of antibiotic applications, pure MnO2 falls short in delivering satisfactory performance. Hence, a set of Fe3+-doped porous MnO2 (0.02Fe-MnO2, 0.1Fe-MnO2, and 0.14Fe-MnO2) nanoparticles were synthesized here via a convenient and energy-efficient one-step reaction method. A series of experiments revealed that Fe-doping strategy enhances the properties of MnO2 host by suppressing the crystalline structure, increasing the amount of surface oxygen defects, and modifying the Mn3+/Mn4+ ratio. Specifically, the tetracycline (TC) removal efficiency of 0.14Fe-MnO2 reaches 92% without the need for any additional co-oxidant, representing a 20% improvement over pristine MnO2 nanoparticles. Moreover, this process shows a fast dynamic (achieving 70% of TC removal in just 5 min) and demonstrates pH-resistance, maintaining high TC removal efficiency (≥90%) over a wide pH range of 3.0-9.0. Mechanical studies reveal that the degradation of TC can be attributed to the oxidation by reactive oxygen radicals and Mn3+, with 1O2 being the primary radical involved in the reaction, accounting for 55% of TC removal. Importantly, cytotoxicity testing indicates that the biotoxicity of TC toward organisms can be effectively mitigated using 0.14Fe-MnO2 nanomaterial. This study presents a readily applicable candidate for economically and conveniently eliminating of environmental TC pollution, thereby reducing the threat posed by TC pollution to the ecosystem.

Recent advances in sulfidized nanoscale zero-valent iron materials for environmental remediation and challenges

Over the past decade, sulfidized nanoscale zero-valent iron (S-nZVI) has been developed as a promising tool for the remediation of contaminated soil, sediment, and water. Although most studies have focused on applying S-nZVI for clean-up purposes, there is still a lack of systematic summary and discussion from its synthesis, application, to toxicity assessment. This review firstly summarized and compared the properties of S-nZVI synthesized from one-step and two-step synthesis methods, and the modification protocols for obtaining better stability and reactivity. In the context of environmental remediation, this review outlined an update on the latest development of S-nZVI for removal of heavy metals, organic pollutants, antibiotic resistance genes (ARGs), and antibiotic resistant bacteria (ARB) and also discussed the underlying removal mechanisms. Environmental factors affecting the remediation performance of S-nZVI (e.g., humic acid, coexisting ions, S/Fe molar ratio, pH, and oxygen condition) were highlighted. Besides, the application potential of S-nZVI in advanced oxidation processes (AOP), especially in activating persulfate, was also evaluated. The toxicity impacts of S-nZVI on the environmental microorganism were described. Finally, the future challenges and remaining restrains to be resolved for better applicability of S-nZVI are also proposed. This review could provide guidance for the environmental remediation with S-nZVI-based technology from theoretical basis and practical perspectives.

A Review on Pulsed Laser Fabrication of Nanomaterials in Liquids for (Photo)catalytic Degradation of Organic Pollutants in the Water System

The water pollution caused by the release of organic pollutants has attracted remarkable attention, and solutions for wastewater treatment are being developed. In particular, the photocatalytic removal of organic pollutants in water systems is a promising strategy to realize the self-cleaning of ecosystems under solar light irradiation. However, at present the semiconductor-based nanocatalysts can barely satisfy the industrial requirements because their wide bandgaps restrict the effective absorption of solar light, which needs an energy band modification to boost the visible light harvesting via surface engineering. As an innovative approach, pulsed laser heating in liquids has been utilized to fabricate the nanomaterials in catalysis; it demonstrates multi-controllable features, such as size, morphology, crystal structure, and even optical or electrical properties, with which photocatalytic performances can be precisely optimized. In this review, focusing on the powerful heating effect of pulsed laser irradiation in liquids, the functional nanomaterials fabricated by laser technology and their applications in the catalytic degradation of various organic pollutants are summarized. This review not only highlights the innovative works of pulsed laser-prepared nanomaterials for organic pollutant removal in water systems, such as the photocatalytic degradation of organic dyes and the catalytic reduction of toxic nitrophenol and nitrobenzene, it also critically discusses the specific challenges and outlooks of this field, including the weakness of the produced yields and the relevant automatic strategies for massive production.

Insights into the carbon nanotubes-mediated activation of permanganate for decontamination under high salinity

Radical-based advanced oxidation process (AOPs) has attracted great interests in wastewater treatment field. However, by the traditional radical-based method, the degradation of organic pollution is greatly suppressed when radicals react with the co-existing anions in the solution. Herein, an efficient method for degrading of contaminant under high salinity conditions is discussed through a non-radical pathway. Carbon nanotubes (CNTs) was employed as an electron transfer medium to facilitate the electron conversion from contaminants to potassium permanganate (PM). Based the results of quenching experiments, probe experiments, and galvanic oxidation process experiments, the degradation mechanism of CNTs/PM process was demonstrated to be electron transfer, rather than reactive intermediate Mn species. As a result, typical influencing factors including salt concentration, cations, and humic acid have less of an impact on degradation during CNTs/PM processes. In addition, the CNTs/PM system exhibits superior reusability and universality of pollutants, which has the potential to be applied as a non-radical pathway for the purification of contaminant in the large-scale high salinity wastewater treatment.

The enhance mechanism of DOM on tetracyclines degradation by electrochemical technology: A improvement of treatment processes

Tetracyclines (TC) is a typical broad-spectrum antimicrobial agent, and excessive use of TC can lead to a large accumulation of residual tetracycline in water. DOM is organic substances that can pass through the 0.45 μm filter. While dissolved organic matter (DOM) is one of the most significant substances in water, which has an important effect on water treatment. In this study, ultraviolet and visible spectrophotometry (UV-Vis) is applied to explore DOM to the effect of the electrochemical degradation. Three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) is used to identify the component variation of DOM after the electrochemical oxidation (EO). Liquid chromatograph mass spectrometer (LC-MS) is used to confirm the degradation pathway of TC whether spontaneous or electrochemical oxidation. High performance liquid chromatography (HPLC) suggests the ROS production by DOM in the electrochemical oxidation under different conditions. Results show that DOM can promote the degradation of TC in the electrochemical oxidation. Tailwater DOM containssubstances can produce persistent free radicals, which can promote the degradation under light and dark conditions, natural source DOM can produce more free radicals under light. Therefore, TC wastewater should be added tailwater to promote the degradation of TC before the further water treatment. Otherwise, TC can be degraded to differentpathways (light, electricity, and degrade spontaneously). This study provides a significant idea for practical water treatment of tetracyclines, and promotes the practical application of electrochemical technology.

Singlet oxygen generation in light-assisted peroxymonosulfate activation by carbon nitride: Role of elevated crystallinity

Carbon nitride (CN) is an emerging 2D non-metal semiconductor material that could be used in photocatalysis and advanced oxidation processes (AOPs) for pollutants degradation. The radical-induced degradation by CN in photocatalysis or photo-assisted AOPs was widely reported in previous studies. Nevertheless, how the non-radical degradation by CN materials could be achieved under irradiation is neither well understood nor controlled. In this work, crystalline carbon nitride (CCN) was synthesized via a facile molten-salt method, and used to activate peroxymonosulfate (PMS) under visible light (>420 nm) to selectively and efficiently degrade tetracycline (TC). Compared to the traditional polymeric carbon nitride (PCN), CCN was found to be a superior PMS activator with the assistance of visible light, which was ascribed to the increased crystallinity of CN tri-s-triazine units and the increased number of catalytic sites, thereby optimizing the photoelectric properties. The activation performance could be further improved by copper loading, with TC degradation rate nearly six times more than that of PCN. EPR trapping and quenching tests showed that singlet oxygen (¹O₂) was the dominant reactive oxygen species in the CCN/PMS/visible light system, attributing to the increased graphitic N sites and formation of electron-deficient C in C-N bonding between neighboring tri-s-triazine units upon crystallinity elevation in CCN. In contrast to the conventional radical-based photocatalysis and AOP processes, the visible light-assisted non-radical AOP degradation was highlighted for the selectivity and the remarkable resistance to the impacts of background inorganic anions or natural organic matter (up to 10 mg/L) in the actual water matrix. This work revealed the ¹O₂ generation mechanism by CN-based materials under the joint assistance of visible light illumination and crystallinity elevation, and its excellent removal performance demonstrates the great potential of CCN-based materials in the practical wastewater treatment.

Application of Deep Eutectic Solvents (DES) for the Synthesis of Iron Heterogeneous Catalyst: Application to Sulfamethoxazole Degradation by Advanced Oxidation Processes

The development of novel approaches to the remotion of pharmaceuticals in wastewater is a subject of concern due to their effect on living beings and the environment. Advanced oxidation processes and the use of relevant catalysts are feasible treatment alternatives that require further development. The development of suitable heterogeneous catalysts is a necessity. This work proposes the synthesis of an iron catalyst in a deep eutectic solvent (Fe-DES) composed of choline chloride and citric acid, which was physically and chemically characterized using SEM-EDS and TEM, FTIR, RAMAN, XRD and XPS. The characterisation confirmed the presence of iron in the form of hematite. Fe-DES was shown to be a multipurpose catalyst that can be applied in the removal of sulfamethoxazole as a reagent in the Fenton and electro-Fenton processes and as an activator of peroxymonosulfate (PMS) processes. After testing the catalyst with the aforementioned techniques, the best result was achieved by combining these processes in an electro-PMS, with great efficiency achieved by dual activation of the PMS with the catalyst and electric field, attaining total elimination at natural pH in 90 min. Furthermore, the degradation was confirmed by the detection of short-chain carboxylic acids (oxalic, succinic, and acetic) and reduction in toxicity values. These results confirm the suitability of Fe-DES to degrade high-priority pharmaceutical compounds.

FeMoS2 micoroparticles as an excellent catalyst for the activation of peroxymonosulfate toward organic contaminant degradation

The FeMoS₂ catalyst for activating peroxymonosulfate (PMS) is a promising pathway for removing organic pollutants in wastewater, however, the dominant FeS₂ phases and sulfur (S) vacancies in it are little involved. Herein, for the first time, novel bimetallic FeMoS₂ microparticles were synthesized by a simple method and then applied for PMS activation for degrading organic pollutants. The catalysts were characterized by several techniques, including X-ray diffraction and X-ray photoelectron spectroscopies. The results revealed that new FeMoS₂ microparticles containing S vacancies in the main FeS₂ phases were obtained. FeS₂ and S vacancies were found to play important roles for activating PMS by radical and nonradical pathways. More Fe²⁺ and Mo⁴⁺ were formed in the presence of S vacancies, which offered a new strategy for exploring novel heterogeneous catalysts in the activation of PMS for environmental remediation.

The influence of ferrocene anchoring method on the reactivity and stability of SBA-15-based catalysts in the degradation of ciprofloxacin via photo-Fenton process

The study is aimed at evaluation of the impact of ferrocene (Fc) anchoring method on the efficiency of its incorporation on the surface of mesoporous silica SBA-15, as well as the reactivity and stability of these hybrid organic-inorganic materials in degradation of ciprofloxacin (CIP) via photocatalytic, Fenton and photo-Fenton processes. For this purpose, Fc was anchored on SBA-15 supports via three different methods: (i) Schiff base formation, (ii) Friedel-Crafts alkylation, and (iii) click reaction (azide-alkyne cycloaddition). The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, infrared spectroscopy and inductively coupled plasma optical emission spectrometry, as well as UV-visible and X-ray photoelectron spectroscopies. The highest efficiency of Fc anchoring was obtained when applying the Friedel-Crafts alkylation, while the least effective was the Schiff base formation. As concerns the catalysts activity, all materials exhibited negligible reactivity in the photocatalytic process, but were capable of degrading CIP in the presence of H₂O₂ (Fenton process). For all materials, the highest efficiency of CIP removal was observed for the photo-Fenton reaction. When expressed as the activity of a single Fc site, the most reactive were Fc species from the catalyst prepared by the click reaction. All materials, irrespectively of the ferrocene anchoring method, were deactivating over the reaction time because of Fc leaching. The highest stability in three subsequent reaction cycles was observed for the catalyst prepared by the azide-alkyne cycloaddition. Thus, the click reaction was found to be the best method for the preparation of Fc-containing catalysts for CIP degradation.

Antimicrobial and the Resistances in the Environment: Ecological and Health Risks, Influencing Factors, and Mitigation Strategies

Antimicrobial contamination and antimicrobial resistance have become global environmental and health problems. A large number of antimicrobials are used in medical and animal husbandry, leading to the continuous release of residual antimicrobials into the environment. It not only causes ecological harm, but also promotes the occurrence and spread of antimicrobial resistance. The role of environmental factors in antimicrobial contamination and the spread of antimicrobial resistance is often overlooked. There are a large number of antimicrobial-resistant bacteria and antimicrobial resistance genes in human beings, which increases the likelihood that pathogenic bacteria acquire resistance, and also adds opportunities for human contact with antimicrobial-resistant pathogens. In this paper, we review the fate of antimicrobials and antimicrobial resistance in the environment, including the occurrence, spread, and impact on ecological and human health. More importantly, this review emphasizes a number of environmental factors that can exacerbate antimicrobial contamination and the spread of antimicrobial resistance. In the future, the timely removal of antimicrobials and antimicrobial resistance genes in the environment will be more effective in alleviating antimicrobial contamination and antimicrobial resistance.

Treatment Trends and Combined Methods in Removing Pharmaceuticals and Personal Care Products from Wastewater-A Review

When discharged into wastewater, pharmaceuticals and personal care products (PPCPs) become microorganic contaminants and are among the largest groups of emerging pollutants. Human, animal, and aquatic organisms' exposures to PPCPs have linked them to an array of carcinogenic, mutagenic, and reproductive toxicity risks. For this reason, various methods are being implemented to remove them from water bodies. This report critically reviews these methods and suggests improvements to removal strategies. Biological, physical, and chemical methods such as biological degradation, adsorption, membrane filtration, and advanced electrical and chemical oxidation are the common methods used. However, these processes were not integrated into most studies to take advantage of the different mechanisms specific to each process and are synergistic in the removal of the PPCPs that differ in their physical and chemical characteristics (charge, molecular weight, hydrophobicity, hydrogen bonding, structure). In the review articles published to date, very little information is available on the use of such integrated methods for removing PPCPs. This report attempts to fill this gap with our knowledge.

La2CoO4+δ perovskite-mediated peroxymonosulfate activation for the efficient degradation of bisphenol A

Sulfate radical-based technology has been considered as an efficient technology to remove pharmaceuticals and personal care products (PPCPs) with heterogeneous metal-mediated catalysts for the activation of peroxymonosulfate (PMS). In this study, La₂CoO_4+δ perovskite with Ruddlesden-Popper type structure was synthesised by the sol-gel method, which was employed in PMS activation. Different characteriazation technologies were applied for the characterization of La₂CoO_4+δ , such as SEM-EDX, XRD, and XPS technologies. A common organic compound, bisphenol A (BPA), is used as a target contaminant, and the effect impactors were fully investigated and explained. The results showed that when the dosage of La₂CoO_4+δ was 0.5 g L^-1 and the concentration of PMS was 1.0 mM in neutral pH solution, about 91.1% degradation efficiency was achieved within 25 minutes. Quenching experiments were introduced in the system to verify the catalytic mechanism of PMS for the BPA degradation, proving the existence of superoxide, hydroxyl radicals and sulfate radicals, which are responsible for the catalytic degradation of BPA. Moreover, the reusability and stability of the catalyst were also conducted which showed good stability during the reaction. This work would improve the applications of A₂BO₄-type perovskites for activating PMS to degrade BPA.

Fabrication of a magnetic Mn(ii) cross-linked chitosan-amine/glutaraldehyde nanocomposite for the rapid degradation of dyes and aerobic selective oxidation of ethylbenzene†

Owing to the great demand for using sustainable, renewable, and widely available materials in catalytic systems for the conversion of waste/toxic material to high value-added and harmless products, biopolymers derived from natural sources have demonstrated great promise as an alternative to state-of-the-art materials that suffer from high costs and limitations. These have encouraged us to design and fabricate a new super magnetization of Mn–Fe₃O₄–SiO₂/amine-glutaraldehyde/chitosan bio-composite (MIOSC-N-et-NH₂@CS-Mn) for advanced/aerobic oxidation process. The morphological and chemical characterization of the as-prepared magnetic bio-composite was assessed using ICP-OES, DR UV-vis, BET, FT-IR, XRD, FE-SEM, HR-TEM, EDS, and XPS techniques. The PMS + MIOSC-N-et-NH₂@CS-Mn system was capable of degrading methylene orange (98.9% of removal efficiency) and selectively oxidizing ethylbenzene to acetophenone (conversion 93.70%, selectivity 95.10% and TOF 214.1 (10³ h⁻¹) within 8.0 min and 5.0 h, respectively. Moreover, MO was efficiently mineralized (TOC removal of ∼56.61) by MIOSC-N-et-NH₂@CS-Mn with 60.4%, 5.20, 0.03 and 86.02% of the synergistic index, reaction stoichiometric efficiency, specific oxidant efficiency, and oxidant utilization ratio in wide pH ranges, respectively. An understanding of its vital parameters and relationship of catalytic activity with structural, environmental factors, leaching/heterogenicity test, long-term stability, inhibitory effect of anions in water matrix, economic study and response surface method (RSM) were evaluated in detail. Overall, the prepared catalyst could be employed as an environmentally friendly and low-cost candidate for the enhanced activation of PMS/O₂ as an oxidant. Additionally, MIOSC-N-et-NH₂@CS-Mn exhibited great stability, high recovery efficiency, and low metal leaching, which eliminated the harsh condition reaction and supplied practical application performance for water purification and selective aerobic oxidation of organic compounds.

Optimization of the catalytic degradation of dyes and aerobic oxidation of ethylbenzene by Mn@Cross-linked Magnetic Chitosan-Amin-Glutaraldehyde.

A Review on Pulsed Laser Preparation of Nanocomposites in Liquids and Their Applications in Photocatalysis

The purpose of photocatalysis is to realize the conversion between solar energy and chemical energy, and it is essential to develop a high-performance photocatalyst under visible-light irradiation. The conventional methods for photocatalyst preparation are mainly wet chemical routes, and abundant yields can be obtained. However, the products are not neat and accompanied by chemical groups and impurities, which are not beneficial for the enhancement of photocatalytic performance. In recent years, as a powerful tool for nanomaterial fabrication, pulsed laser heating in a liquid medium has been utilized to prepare a variety of nanocomposites. Products with synergistic effects and high crystallinity can be rapidly prepared under pulsed laser selective heating, which is beneficial for obtaining more effective photocatalytic performance. In this review, the typical characteristics of pulsed laser heating in liquids and their prepared nanocomposites for photocatalytic applications are summarized. This review not only highlights the innovative works of pulsed-laser-prepared nanocomposites in liquids for photocatalysis but also briefly introduces the specific challenges and prospects of this field.