Self-crosslinked fibrous collagen/chitosan blends: Processing, properties evaluation and monitoring of degradation by bi-fluorescence imaging

Wet-Spun Chitosan-Sodium Caseinate Fibers for Biomedicine: From Spinning Process to Physical Properties

We designed and characterized chitosan-caseinate fibers processed through wet spinning for biomedical applications such as drug delivery from knitted medical devices. Sodium caseinate was either incorporated directly into the chitosan dope or allowed to diffuse into the chitosan hydrogel from a coagulation bath containing sodium caseinate and sodium hydroxide (NaOH). The latter route, where caseinate was incorporated in the neutralization bath, produced fibers with better mechanical properties for textile applications than those formed by the chitosan-caseinate mixed collodion route. The latter processing method consists of enriching a pre-formed chitosan hydrogel with caseinate, preserving the structure of the semicrystalline hydrogel without drastically affecting interactions involved in the chitosan self-assembly. Thus, dried fibers, after coagulation in a NaOH/sodium caseinate aqueous bath, exhibited preserved ultimate mechanical properties. The crystallinity ratio of chitosan was not significantly impacted by the presence of caseinate. However, when caseinate was incorporated into the chitosan dope, chitosan-caseinate fibers exhibited lower ultimate mechanical properties, possibly due to a lower entanglement density in the amorphous phase of the chitosan matrix. A standpoint is to optimize the chitosan-caseinate composition ratio and processing route to find a good compromise between the preservation of fiber mechanical properties and appropriate fiber composition for potential application in drug release.

3D-Printed Osteoinductive Polymeric Scaffolds with Optimized Architecture to Repair a Sheep Metatarsal Critical-Size Bone Defect

The reconstruction of critical-size bone defects in long bones remains a challenge for clinicians. A new osteoinductive medical device is developed here for long bone repair by combining a 3D-printed architectured cylindrical scaffold made of clinical-grade polylactic acid (PLA) with a polyelectrolyte film coating delivering the osteogenic bone morphogenetic protein 2 (BMP-2). This film-coated scaffold is used to repair a sheep metatarsal 25-mm long critical-size bone defect. In vitro and in vivo biocompatibility of the film-coated PLA material is proved according to ISO standards. Scaffold geometry is found to influence BMP-2 incorporation. Bone regeneration is followed using X-ray scans, µCT scans, and histology. It is shown that scaffold internal geometry, notably pore shape, influenced bone regeneration, which is homogenous longitudinally. Scaffolds with cubic pores of ≈870 µm and a low BMP-2 dose of ≈120 µg cm-3 induce the best bone regeneration without any adverse effects. The visual score given by clinicians during animal follow-up is found to be an easy way to predict bone regeneration. This work opens perspectives for a clinical application in personalized bone regeneration.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Effect of Different Crosslinkers on Denatured Dentin Collagen's Biostability, MMP Inhibition and Mechanical Properties

OBJECTIVE

Sound, natural dentin collagen can be stabilized against enzymatic degradation through exogenous crosslinking treatment for durable bonding; however, the effect on denatured dentin (DD) collagen is unknown. Hence, the ability of different crosslinkers to enhance/restore the properties of DD collagen was assessed.

METHODS

Demineralized natural and DD collagen films (7 mm × 7 mm × 7 µm) and beams (0.8 mm × 0.8 mm × 7 mm) were prepared. DD collagen was experimentally produced by heat or acid exposure, which was then assessed by various techniques. All specimens were then treated with 1 wt% of chemical crosslinker 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/n-hydroxysuccinimide (EDC/NHS) and two structurally different flavonoids-theaflavins (TF) from black tea and type-A proanthocyanidins from cranberry juice (CR) for either 30 s or 1 h. The controls were untreated. Dentin films were assessed for chemical interaction and cross-linking effect by FTIR, biostability against exogenous collagenase by weight loss (WL) and hydroxyproline release (HYP), and endogenous matrix metalloproteinases (MMPs) activity by confocal laser microscopy. Dentin beams were evaluated for tensile properties. Data were analyzed using ANOVA and Tukey's test (α = 0.05).

RESULTS

Compared with natural collagen, DD collagen showed pronounced structural changes, altered biostability and decreased mechanical properties, which were then improved to various degrees that were dependent on the crosslinkers used, with EDC/NHS being the least effective. Surprisingly, the well-known MMP inhibitor EDC/NHS showed negligible effect on or even increased MMP activity in DD collagen. As compared with control, cross-linking induced by TF and CR significantly increased collagen biostability (reduced WL and HYP release, p < 0.05), MMP inhibition (p < 0.001) and mechanical properties (p < 0.05), regardless of denaturation.

CONCLUSIONS

DD collagen cannot or can only minimally be stabilized via EDC/NHS crosslinking; however, the challenging substrate of DD collagen can be enhanced or restored using the promising flavonoids TF and CR.

Smart biomaterials and their potential applications in tissue engineering

Smart biomaterials have been rapidly advancing ever since the concept of tissue engineering was proposed. Interacting with human cells, smart biomaterials can play a key role in novel tissue morphogenesis. Various aspects of biomaterials utilized in or being sought for the goal of encouraging bone regeneration, skin graft engineering, and nerve conduits are discussed in this review. Beginning with bone, this study summarizes all the available bioceramics and materials along with their properties used singly or in conjunction with each other to create scaffolds for bone tissue engineering. A quick overview of the skin-based nanocomposite biomaterials possessing antibacterial properties for wound healing is outlined along with skin regeneration therapies using infrared radiation, electrospinning, and piezoelectricity, which aid in wound healing. Furthermore, a brief overview of bioengineered artificial skin grafts made of various natural and synthetic polymers has been presented. Finally, by examining the interactions between natural and synthetic-based biomaterials and the biological environment, their strengths and drawbacks for constructing peripheral nerve conduits are highlighted. The description of the preclinical outcome of nerve regeneration in injury healed with various natural-based conduits receives special attention. The organic and synthetic worlds collide at the interface of nanomaterials and biological systems, producing a new scientific field including nanomaterial design for tissue engineering.

Origin of critical nature and stability enhancement in collagen matrix based biomaterials: Comprehensive modification technologies

Collagen is the most abundant protein in animals and one of the most important extracellular matrices that chronically plays an important role in biomaterials. However, the major concern about native collagen is the lack of its thermal stability and weak resistance to proteolytic degradation. Currently, a series of modification technologies have been explored for critical nature and stability enhancement in collagen matrix-based biomaterials, and prosperously large-scale progress has been achieved. The establishment of covalent bonds among collagen noumenon has been verified assuringly to have pregnant influences on its physicochemical properties and biological properties, enlightening to discuss the disparate modification technologies on specific effects on the multihierarchical structures and pivotal performances of collagen. In this review, various existing modification methods were classified from a new perspective, scilicet whether to introduce exogenous substances, to reveal the basic scientific theories of collagen modification. Understanding the role of modification technologies in the enhancement of collagen performance is crucial for developing novel collagen-based biomaterials. Moreover, the different modification effects caused by the interaction sites between the modifier and collagen, and the structure-activity relationship between the structure of the modifier and the properties of collagen were reviewed.

Supply Chain Design for Blending Technologies

When optimizing blending technologies, the main objective is to determine the right mixing ratio of the raw materials, depending on the different qualities and costs of the raw materials available. It can be concluded that research is mainly focused on answering technological questions, and only very few studies take into account the logistics processes related to blending technologies, their design, cost-efficiency, utilization and sustainability including energy efficiency and environmental impact. Based on this fact, within the frame of this research the authors describe a new approach, extending the basic model of blending problems by adding new supply chain efficiency-related components that makes it possible to take logistics parameters related to the raw materials supply (available stocks, batch sizes, transport and storage costs, supply chain structure) into consideration. A mathematical model of this supply chain optimization problem for blending technologies is described including routing and assignment problems in the supply chain, while technological objectives are also taken into consideration as technological objective functions and constraints. The optimization problem described in the model is a problem with non-deterministic polynomial-time hardness (NP-hard), which means that there are no known efficient analytical methods to solve the logistics-related supply chain optimization of blending technologies. As a solution algorithm, the authors have used an evolutive solver and a new metrics, which improved the efficiency of the comparison of distances between solutions of routing problems represented by permutation arrays. The scenario analysis, which focuses on the integrated optimization of technological and logistics problems validates the model and evaluates the solution algorithm and the new metrics. Using the mentioned algorithm, the supply chain processes of the blending technologies can be improved from availability, efficiency, sustainability point of view.

Glibenclamide Nanocrystal-Loaded Bioactive Polymeric Scaffolds for Skin Regeneration: In Vitro Characterization and Preclinical Evaluation

Skin restoration following full-thickness injury poses significant clinical challenges including inflammation and scarring. Medicated scaffolds formulated from natural bioactive polymers present an attractive platform for promoting wound healing. Glibenclamide was formulated in collagen/chitosan composite scaffolds to fulfill this aim. Glibenclamide was forged into nanocrystals with optimized colloidal properties (particle size of 352.2 nm, and polydispersity index of 0.29) using Kolliphor as a stabilizer to allow loading into the hydrophilic polymeric matrix. Scaffolds were prepared by the freeze drying method using different total polymer contents (3-6%) and collagen/chitosan ratios (0.25-2). A total polymer content of 3% at a collagen/chitosan ratio of 2:1 (SCGL3-2) was selected based on the results of in vitro characterization including the swelling index (1095.21), porosity (94.08%), mechanical strength, rate of degradation and in vitro drug release. SCGL3-2 was shown to be hemocompatible based on the results of protein binding, blood clotting and percentage hemolysis assays. In vitro cell culture studies on HSF cells demonstrated the biocompatibility of nanocrystals and SCGL3-2. In vivo studies on a rat model of a full-thickness wound presented rapid closure with enhanced histological and immunohistochemical parameters, revealing the success of the scaffold in reducing inflammation and promoting wound healing without scar formation. Hence, SCGL3-2 could be considered a potential dermal substitute for skin regeneration.

Recent Applications of Biopolymers Derived from Fish Industry Waste in Food Packaging

Fish waste is attracting growing interest as a new raw material for biopolymer production in different application fields, mainly in food packaging, with significant economic and environmental advantages. This review paper summarizes the recent advances in the valorization of fish waste for the preparation of biopolymers for food packaging applications. The issues related to fishery industry waste and fish by-catch and the potential for re-using these by-products in a circular economy approach have been presented in detail. Then, all the biopolymer typologies derived from fish waste with potential applications in food packaging, such as muscle proteins, collagen, gelatin, chitin/chitosan, have been described. For each of them, the recent applications in food packaging, in the last five years, have been overviewed with an emphasis on smart packaging applications. Despite the huge industrial potential of fish industry by-products, most of the reviewed applications are still at lab-scale. Therefore, the technological challenges for a reliable exploitation and recovery of several potentially valuable molecules and the strategies to improve the barrier, mechanical and thermal performance of each kind of biopolymer have been analyzed.

Cranberry Juice Extract Rapidly Protects Demineralized Dentin against Digestion and Inhibits Its Gelatinolytic Activity

Improving the longevity of composite restorations has proven to be difficult when they are bonded to dentin. Dentin demineralization leaves collagen fibrils susceptible to enzymatic digestion, which causes breakdown of the resin-dentin interface. Therefore, measures for counteracting the enzymatic environment by enhancing dentin collagen's resistance to degradation have the potential to improve the durability of dental composite restorations. This study aimed to evaluate the effects of polyphenol-rich extracts and a chemical cross-linker on the cross-linking interaction, resistance to digestion, and endogenous matrix metalloproteinase (MMP) activities of dentin collagen under clinically relevant conditions. Ten-µm-thick films were cut from dentin slabs of non-carious extracted human third molars. Following demineralization, polyphenol-rich extracts-including grape seed (GSE), green tea (GTE), and cranberry juice (CJE)-or chemical cross-linker carbodiimide with n-hydroxysuccinimide (EDC/NHS) were applied to the demineralized dentin surfaces for 30 s. The collagen cross-linking, bio-stabilization, and gelatinolytic activities of MMPs 2 and 9 were studied by using Fourier-transform infrared spectroscopy, weight loss, hydroxyproline release, scanning/transmission electron microscopy, and in situ zymography. All treatments significantly increased resistance to collagenase degradation and reduced the gelatinolytic MMP activity of dentin collagen compared to the untreated control. The CJE- and GSE-treated groups were more resistant to digestion than the GTE- or EDC/NHS-treated ones (p < 0.05), which was consistent with the cross-linking interaction found with FTIR and the in situ performance on the acid-etched dentin surface found with SEM/TEM. The collagen films treated with CJE showed the lowest MMP activity, followed by GSE, GTE, and, finally, EDC/NHS. The CJE-treated dentin collagen rapidly increased its resistance to digestion and MMP inhibition. An application of CJE as short as 30 s may be a clinically feasible approach to improving the longevity of dentin bonding in composite restorations.

Controlled Polyelectrolyte Association of Chitosan and Carboxylated Nano-Fibrillated Cellulose by Desalting

We prepared chitosan (CHI) hydrogels reinforced with highly charged cellulose nanofibrils (CNF) by the desalting method. To this end, the screening of electrostatic interactions between CHI polycation and CNF polyanion was performed by adding NaCl at 0.4 mol/L to the chitosan acetate solution and to the cellulose nanofibrils suspension. The polyelectrolyte complexation between CHI polycation and CNF polyanion was then triggered by desalting the CHI/CNF aqueous mixture by multistep dialysis, in large excess of chitosan. Further gelation of non-complexed CHI was performed by alkaline neutralization of the polymer, yielding high reinforcement effects as probed by the viscoelastic properties of the final hydrogel. The results showed that polyelectrolyte association by desalting can be achieved with a polyanionic nanoparticle partner. Beyond obtaining hydrogel with improved mechanical performance, these composite hydrogels may serve as precursor for dried solid forms with high mechanical properties.

Chitosan based antibacterial composite materials for leather industry: a review

Abstract

Chitosan is an amorphous translucent substance with a structural unit similar to the polysaccharide structure of the extracellular matrix, It has good antibacterial, biocompatible, and degradable properties. It has important application value in leather, water treatment, medicine, food and other fields, so chitosan and its modified products have received widespread attention. This article reviewed the preparation methods of chitosan-based antibacterial composites in recent years, including chitosan/collagen, chitosan/graphene, chitosan/tannic acid, and chitosan/polyethylene glycol composite materials, elaborates their modification methods and antibacterial mechanism were reviewed in detail, and its applications in the leather industry as antibacterial auxiliaries and water treatment antibacterial adsorption materials were discussed. Finally, the future development and challenges of chitosan-based composite materials in the leather industry were forecasted.

Graphical abstract

3D bioprinting of a biomimetic meniscal scaffold for application in tissue engineering

Appropriate biomimetic scaffolds created via 3D bioprinting are promising methods for treating damaged menisci. However, given the unique anatomical structure and complex stress environment of the meniscus, many studies have adopted various techniques to take full advantage of different materials, such as the printing combined with infusion, or electrospining, to chase the biomimetic meniscus, which makes the process complicated to some extent. Some researchers have tried to tackle the challenges only by 3D biopringting, while its alternative materials and models have been constrained. In this study, based on a multilayer biomimetic strategy, we optimized the preparation of meniscus-derived bioink, gelatin methacrylate (GelMA)/meniscal extracellular matrix (MECM), to take printability and cytocompatibility into account together. Subsequently, a customized 3D bioprinting system featuring a dual nozzle + multitemperature printing was used to integrate the advantages of polycaprolactone (PCL) and meniscal fibrocartilage chondrocytes (MFCs)-laden GelMA/MECM bioink to complete the biomimetic meniscal scaffold, which had the best biomimetic features in terms of morphology and components. Furthermore, cell viability, mechanics, biodegradation and tissue formation in vivo were performed to ensure that the scaffold had sufficient feasibility and functionality, thereby providing a reliable basis for its application in tissue engineering.

•

We have optimized the preparation of meniscus-derived bioink with good printability and cytocompatibility.

•

A customized printing system for biomimetic meniscus, the dual-nozzle + multitemperature printing system was developed.

•

We have achieved multilayer meniscal biomimetic strategy, especially the best biomimetics of morphology and components.

•

Focusing on application prospect, we designed a few experiments to verity the feasibility and functionality of the scaffold.

Nanostructured Biomaterials for Bone Regeneration

This review article addresses the various aspects of nano-biomaterials used in or being pursued for the purpose of promoting bone regeneration. In the last decade, significant growth in the fields of polymer sciences, nanotechnology, and biotechnology has resulted in the development of new nano-biomaterials. These are extensively explored as drug delivery carriers and as implantable devices. At the interface of nanomaterials and biological systems, the organic and synthetic worlds have merged over the past two decades, forming a new scientific field incorporating nano-material design for biological applications. For this field to evolve, there is a need to understand the dynamic forces and molecular components that shape these interactions and influence function, while also considering safety. While there is still much to learn about the bio-physicochemical interactions at the interface, we are at a point where pockets of accumulated knowledge can provide a conceptual framework to guide further exploration and inform future product development. This review is intended as a resource for academics, scientists, and physicians working in the field of orthopedics and bone repair.

Bone Regeneration Using Duck's Feet-Derived Collagen Scaffold as an Alternative Collagen Source

Collagen is an important component that makes 25-35% of our body proteins. Over the past decades, tissue engineers have been designing collagen-based biocompatible materials and studying their applications in different fields. Collagen obtained from cattle and pigs has been mainly used until now, but collagen derived from fish and other livestock has attracted more attention since the outbreak of mad cow disease, and they are also used as a raw material for cosmetics and foods. Due to the zoonotic infection using collagen derived from pigs and cattle, their application in developing biomaterials is limited; hence, the development of new animal-derived collagen is required. In addition, there is a religion (Islam, Hinduism, and Judaism) limited to export raw materials and products derived from cattle and pig. Hence, high-value collagen that is universally accessible in the world market is required. Therefore, in this review, we have dealt with the use of duck's feet-derived collagen (DC) as an emerging alternative to solve this problem and also presenting few original investigated bone regeneration results performed using DC.

Seafood Waste as Attractive Source of Chitin and Chitosan Production and Their Applications

Chitosan is a cationic polymer obtained by deacetylation of chitin, found abundantly in crustacean, insect, arthropod exoskeletons, and molluscs. The process of obtaining chitin by the chemical extraction method comprises the steps of deproteinization, demineralization, and discoloration. To obtain chitosan, the deacetylation of chitin is necessary. These polymers can also be extracted through the biological extraction method involving the use of microorganisms. Chitosan has biodegradable and biocompatible properties, being applied in the pharmaceutical, cosmetic, food, biomedical, chemical, and textile industries. Chitosan and its derivatives may be used in the form of gels, beads, membranes, films, and sponges, depending on their application. Polymer blending can also be performed to improve the mechanical properties of the bioproduct. This review aims to provide the latest information on existing methods for chitin and chitosan recovery from marine waste as well as their applications.

Dimeric Proanthocyanidins on the Stability of Dentin and Adhesive Biointerfaces

A dentin biomodification strategy with selective proanthocyanidin (PAC)-enriched extracts reinforces dentin and dentin-resin interfaces. Enrichment of the extracts according to the degree of polymerization allows exploration of bioactive principles of PACs and structure-activity relationships. This study investigated the sustained dentin matrix biomodification and dentin-resin bioadhesion of 2 fractions consisting exclusively of B-type PAC dimers with or without a single galloyl motif (specifically, DIMER_G and DIMER_NG) and their precursor material, enriched grape seed extract (e-GSE; Vitis vinifera). The biomodification potential was determined by long-term evaluation of the apparent modulus of elasticity and collagen solubility (hydroxyproline release). Chemical characterization of the dentin matrix was performed by attenuated total reflectance-Fourier-transform infrared spectroscopy. The bioadhesive properties were assessed by a microtensile bond strength test at different time points, and macro-hybrid layers were produced to verify the degree of conversion of the adhesive resin. Fractions consisting of DIMER_G, DIMER_NG, and their precursor, e-GSE, increased the modulus of elasticity at all time points and reduced collagen degradation. Specimens treated with DIMER_NG remained stable throughout 12 mo of storage, whereas a significant drop in the modulus of elasticity was observed for the DIMER_G and e-GSE groups at 6 mo. The fractions and precursor did not affect the degree of resin conversion at the hybrid layer. Changes in infrared resonances corresponding to collagen cross-links in the dentin matrix occurred for all treatments. Higher bond strength was observed for dentin treated with e-GSE as compared with DIMER_G and DIMER_NG; all biointerfaces remained stable after 12 mo. Nongalloylated PACs mediate stable dentin biomodification, which includes protective activity against collagen degradation and reinforcement of the anchoring dentin matrix. Collectively, PACs with a higher degree of oligomerization offer a robust bioadhesion between the hydrophilic dentin matrix and the hydrophobic adhesive.

Crosslinking of hybrid scaffolds produced from collagen and chitosan

The development of biodegradable scaffolds able to support cell growth has recently become of great importance. Therefore, the main objective of this work was the development of hybrid scaffolds made from the mixture of two biopolymers (collagen and chitosan) and the comparison of the effect of glutaraldehyde as crosslinking agent with three different crosslinking methods (chemical: genipin; physical: temperature and enzymatic: transglutaminase) in order to look for a promising candidate to substitute it. To achieve this purpose, the mechanical properties, structure, porosity, degree of crosslinking and swelling of the different scaffolds were assessed. The best ratio of biopolymers (collagen:chitosan) to form hybrid scaffolds was 1:1, which improve their mechanical and morphological properties compared to unitary scaffolds (only collagen or chitosan). In addition, the incorporation of 10% w/w transglutaminase (crosslinking agent) with respect to the mass of biopolymers made these scaffolds a good structure for the growth and proliferation of cells.