1
|
Subramaniam T, Ansari MNM, Krishnan SG, Khalid M. Kenaf-based activated carbon: A sustainable solution for high-performance aqueous symmetric supercapacitors. Chemosphere 2024; 354:141593. [PMID: 38460854 DOI: 10.1016/j.chemosphere.2024.141593] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/24/2023] [Revised: 02/25/2024] [Accepted: 02/29/2024] [Indexed: 03/11/2024]
Abstract
This study presents an innovative method for synthesizing activated carbon with an exceptionally high surface area (3359 m2 g-1) using kenaf fiber-based biochar through chemical activation. The achieved specific surface area surpasses activated carbon derived from other reported fiber-based precursors. The resulting activated carbon was investigated as electrodes for supercapacitors, revealing a remarkable maximum capacitance of 312 F g-1 at a current density of 0.5 A g-1. An aqueous symmetric supercapacitor employing these high-surface-area electrodes exhibited an outstanding energy density of 18.9 Wh kg-1 at a power density of 250 W kg-1. Notably, the supercapacitor retained exceptional capacitance, maintaining 93% of its initial capacitance even after 5000 charge-discharge cycles.
Collapse
Affiliation(s)
| | - M N M Ansari
- Mechanical Engineering Department, Universiti Tenaga Nasional (UNITEN), 43000, Kajang, Malaysia; Institute of Power Engineering, Universiti Tenaga Nasional, Kajang, 43000, Selangor, Malaysia.
| | - Syam G Krishnan
- Sunway Centre for Electrochemical Energy and Sustainable Technology (SCEEST), School of Engineering and Technology, Sunway University, No. 5 Jalan Universiti, Bandar Sunway, 47500, Petaling Jaya, Selangor, Malaysia; Department of Chemical Engineering, Faculty of Engineering and Information Technology, The University of Melbourne, Victoria, 3010, Australia.
| | - Mohammad Khalid
- Sunway Centre for Electrochemical Energy and Sustainable Technology (SCEEST), School of Engineering and Technology, Sunway University, No. 5 Jalan Universiti, Bandar Sunway, 47500, Petaling Jaya, Selangor, Malaysia; Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104, Karnataka, India; Centre of Research Impact and Outcome, Chitkara University, Punjab, 140401, India.
| |
Collapse
|
2
|
Hristea G, Iordoc M, Lungulescu EM, Bejenari I, Volf I. A sustainable bio-based char as emerging electrode material for energy storage applications. Sci Rep 2024; 14:1095. [PMID: 38212385 PMCID: PMC10784506 DOI: 10.1038/s41598-024-51350-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2023] [Accepted: 01/03/2024] [Indexed: 01/13/2024] Open
Abstract
In the last few years, extensive research efforts have been made to develop novel bio-char-based electrodes using different strategies starting from a variety of biomass precursors as well as applying different thermochemical conversion paths. In this regard, hydrothermal carbonization method is becoming a more prevalent option among conversion procedures even if pyrolysis remains crucial in converting biomass into carbonaceous materials. The main aim of this study is to develop an innovative supercapacitor electrode from spruce bark waste through a unique low-temperature technique approach, which proved to effectively eliminate the pyrolysis step. Consequently, a hybrid spruce-bark-graphene oxide compound (HySB) was obtained as electrode material for supercapacitors. When compared to a regularly used commercial electrode material, SLC1512P graphite (reference) with 150.3 µF cm-2 capacitance, the HySB has a substantially higher capacitive performance of 530.5 µF cm-2. In contrast to the reference, the HySB polarization resistance increases by two orders of magnitude at the stationary potential and by three orders of magnitude at the optimum potential, underlying that the superior performances of HySB extend beyond static conditions. The synthesis strategy provides an appropriate energy-efficient option for converting biomass into carbonaceous materials with meaningful properties suitable for energy storage applications.
Collapse
Affiliation(s)
- Gabriela Hristea
- National Research and Development Institute for Electrical Engineering ICPE-CA, 313 Splaiul Unirii, Bucuresti, Romania.
| | - Mihai Iordoc
- National Research and Development Institute for Electrical Engineering ICPE-CA, 313 Splaiul Unirii, Bucuresti, Romania
| | - Eduard-Marius Lungulescu
- National Research and Development Institute for Electrical Engineering ICPE-CA, 313 Splaiul Unirii, Bucuresti, Romania
| | - Iuliana Bejenari
- Faculty of Chemical Engineering and Environmental Protection, Gheorghe Asachi Technical University of Iasi, 73 Prof. D. Mangeron Street, 700050, Iasi, Romania
| | - Irina Volf
- Faculty of Chemical Engineering and Environmental Protection, Gheorghe Asachi Technical University of Iasi, 73 Prof. D. Mangeron Street, 700050, Iasi, Romania.
| |
Collapse
|
3
|
Komal Zafar H, Zainab S, Masood M, Sohail M, Shoaib Ahmad Shah S, Karim MR, O'Mullane A, Ostrikov KK, Will G, Wahab MA. Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications. CHEM REC 2024; 24:e202300161. [PMID: 37582638 DOI: 10.1002/tcr.202300161] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2023] [Revised: 07/19/2023] [Indexed: 08/17/2023]
Abstract
Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities. After presenting the brief updates on porous carbons (PCs), then this review will focus on the nitrogen (N) doped porous carbon materials (NPC) for electrochemical supercapacitors as the NPCs play a vital role in supercapacitor applications in the field of energy storage. Therefore, this review highlights recent advances in NPCs, including developments in the synthesis of NPCs that have created new methods for controlling their morphology, composition, and pore structure, which can significantly enhance their electrochemical performance. The investigated N-doped materials a wide range of specific surface areas, ranging from 181.5 to 3709 m2 g-1 , signifies a substantial increase in the available electrochemically active surface area, which is crucial for efficient energy storage. Moreover, these materials display notable specific capacitance values, ranging from 58.7 to 754.4 F g-1 , highlighting their remarkable capability to effectively store electrical energy. The outstanding electrochemical performance of these materials is attributed to the synergy between heteroatoms, particularly N, and the carbon framework in N-doped porous carbons. This synergy brings about several beneficial effects including, enhanced pseudo-capacitance, improved electrical conductivity, and increased electrochemically active surface area. As a result, these materials emerge as promising candidates for high-performance supercapacitor electrodes. The challenges and outlook in NPCs for supercapacitor applications are also presented. Overall, this review will provide valuable insights for researchers in electrochemical energy storage and offers a basis for fabricating highly effective and feasible supercapacitor electrodes.
Collapse
Affiliation(s)
- Hafiza Komal Zafar
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, H-12, Islamabad, 44000, Pakistan
| | - Sara Zainab
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, H-12, Islamabad, 44000, Pakistan
| | - Maria Masood
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, H-12, Islamabad, 44000, Pakistan
| | - Manzar Sohail
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, H-12, Islamabad, 44000, Pakistan
| | - Syed Shoaib Ahmad Shah
- Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, H-12, Islamabad, 44000, Pakistan
| | - Mohammad R Karim
- Center of Excellence for Research in Engineering Materials (CEREM), Deanship of Scientific Research (DSR), College of Engineering, King Saud University, P. O. Box 800, Riyadh, 11421, Saudi Arabia
- K.A. CARE Energy Research and Innovation Center, King Saud University, Riyadh, 11451, Saudi Arabia
| | - Anthony O'Mullane
- School of Chemistry and Physics and Centre for Materials Science, Queensland University of Technology (QUT), Brisbane, QLD 4000, Australia
| | - Kostya Ken Ostrikov
- School of Chemistry and Physics and Centre for Materials Science, Queensland University of Technology (QUT), Brisbane, QLD 4000, Australia
| | - Geoffrey Will
- Energy and Process Engineering Laboratory, School of Mechanical, Medical and Process Engineering, Faculty of Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD 4000, Australia
| | - Md A Wahab
- Energy and Process Engineering Laboratory, School of Mechanical, Medical and Process Engineering, Faculty of Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD 4000, Australia
| |
Collapse
|
4
|
Jin XY, Ge Q, Cong H, Zhang YQ, Zhao JL, Jiang N. Recent Breakthroughs in Supercapacitors Boosted by Macrocycles. ChemSusChem 2023; 16:e202300027. [PMID: 36946375 DOI: 10.1002/cssc.202300027] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/07/2023] [Revised: 03/22/2023] [Indexed: 06/04/2023]
Abstract
Supercapacitors are essential for electrochemical energy storage because of their high-power density, good cycle stability, fast charging and discharging rates, and low maintenance cost. Macrocycles, including cucurbiturils, calixarene, and cyclodextrins, are cage-like organic compounds (with a nanocavity that contains O and N heteroatoms) with unique potential in supercapacitors. Here, we review the applications of macrocycles in supercapacitor systems, and we illustrate the merits of organic macrocycles in electrodes and electrolytes for improving the electrochemical double-layer capacitors and pseudocapacitance via supramolecular strategies. Then, the observed relationships between electrochemical performance and macrocyclic structures are introduced. This comprehensive review describes recent progress on macrocycle-block supercapacitors for researchers.
Collapse
Affiliation(s)
- Xian-Yi Jin
- Collaborative Innovation Center of Guizhou Province for Efficient Utilization of Phosphorus and Fluorine Resources, Guizhou University, Guiyang, 550025, Guizhou, P. R. China
| | - Qingmei Ge
- Collaborative Innovation Center of Guizhou Province for Efficient Utilization of Phosphorus and Fluorine Resources, Guizhou University, Guiyang, 550025, Guizhou, P. R. China
| | - Hang Cong
- Collaborative Innovation Center of Guizhou Province for Efficient Utilization of Phosphorus and Fluorine Resources, Guizhou University, Guiyang, 550025, Guizhou, P. R. China
| | - Yun-Qian Zhang
- Key Laboratory of Macrocyclic and Supramolecular Chemistry of Guizhou Province, Guizhou University, Guiyang, 550025, P. R. China
| | - Jiang-Lin Zhao
- Precision Medicine R&D Center, Zhuhai Institute of Advanced Technology, Chinese Academy of Sciences, Zhuhai, 519080, Guangdong, P. R. China
| | - Nan Jiang
- Collaborative Innovation Center of Guizhou Province for Efficient Utilization of Phosphorus and Fluorine Resources, Guizhou University, Guiyang, 550025, Guizhou, P. R. China
| |
Collapse
|
5
|
Park J, Kim T. Biomass-Derived Sustainable Electrode Material for Low-Grade Heat Harvesting. Nanomaterials (Basel) 2023; 13:nano13091488. [PMID: 37177032 PMCID: PMC10180141 DOI: 10.3390/nano13091488] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2023] [Revised: 04/24/2023] [Accepted: 04/25/2023] [Indexed: 05/15/2023]
Abstract
The ever-increasing energy demand and global warming caused by fossil fuels push for the exploration of sustainable and eco-friendly energy sources. Waste thermal energy has been considered as one of the promising candidates for sustainable power generation as it is abundantly available everywhere in our daily lives. Recently, thermo-electrochemical cells based on the temperature-dependent redox potential have been intensely studied for efficiently harnessing low-grade waste heat. Despite considerable progress in improving thermocell performance, no attempt was made to develop electrode materials from renewable precursors. In this work, we report the synthesis of a porous carbon electrode from mandarin peel waste through carbonization and activation processes. The influence of carbonization temperature and activating agent/carbon precursor ratio on the performance of thermocell was studied to optimize the microstructure and elemental composition of electrode materials. Due to its well-developed pore structure and nitrogen doping, the mandarin peel-derived electrodes carbonized at 800 °C delivered the maximum power density. The areal power density (P) of 193.4 mW m-2 and P/(ΔT)2 of 0.236 mW m-2 K-2 were achieved at ΔT of 28.6 K. However, KOH-activated electrodes showed no performance enhancement regardless of activating agent/carbon precursor ratio. The electrode material developed here worked well under different temperature differences, proving its feasibility in harvesting electrical energy from various types of waste heat sources.
Collapse
Affiliation(s)
- Jonghak Park
- Department of Mechanical Engineering, Incheon National University, Incheon 22012, Republic of Korea
| | - Taewoo Kim
- Department of Mechanical Engineering, Incheon National University, Incheon 22012, Republic of Korea
| |
Collapse
|
6
|
Kim DY, Ma CH, Jang Y, Radhakrishnan S, Ko TH, Kim BS. A simple and green approach to develop porous carbons from biomass lignin for advanced asymmetric supercapacitors. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.129785] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
7
|
Taslim R, Apriwandi A, Taer E. Novel Moringa oleifera Leaves 3D Porous Carbon-Based Electrode Material as a High-Performance EDLC Supercapacitor. ACS Omega 2022; 7:36489-36502. [PMID: 36278080 PMCID: PMC9583089 DOI: 10.1021/acsomega.2c04301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/08/2022] [Accepted: 09/29/2022] [Indexed: 06/16/2023]
Abstract
Biomass-based activated carbon has great potential in the use of its versatile 3D porous structures as an excellent electrode material in presenting high conductivity, large porosity, and outstanding stability for electrochemical energy storage devices. In this study, the electrode material develops through a novel consolidated carbon disc binder-free design, which was derived from Moringa oleifera leaves (MOLs) for electrochemical double-layer capacitor applications. The carbon discs are prepared in a series of treatments of precarbonized, chemical impregnation of zinc chloride, integrated pyrolysis of N2 carbonization, and CO2 physical activation. The physical activation temperatures applied at 650, 750, and 850 °C optimize the precursor potential. By optimizing the 3D hierarchical pore properties of the MOL750, the carbon disc binder-free design demonstrates optimal symmetric supercapacitor performance with a high specific capacitance of 307 F g-1 at a current density of 1 A g-1 in an aqueous electrolyte solution of 1 M H2SO4. Furthermore, the extremely low internal resistance (0.006Ω) of the carbon disc initiated excellent electrical conductivity. The supercapacitors also maintain their high capacitive properties in aqueous electrolyte solutions of 6 M KOH and 1 M Na2SO4, respectively. The results show that a novel consolidated carbon disc binder-free design can be obtained from biomass MOLs through a reasonable approach to develop superior electrode materials to enhance high-performance electrochemical energy storage devices.
Collapse
Affiliation(s)
- Rika Taslim
- Department
of Industrial Engineering, State Islamic
University of Sultan Syarif Kasim, Riau, Simpang Baru-Tampan, Pekanbaru 28293 Indonesia
| | - Apriwandi Apriwandi
- Department
of Physics, Faculty of Mathematics and Natural Sciences, University of Riau, Panam, Pekanbaru 28293 Indonesia
| | - Erman Taer
- Department
of Physics, Faculty of Mathematics and Natural Sciences, University of Riau, Panam, Pekanbaru 28293 Indonesia
| |
Collapse
|
8
|
Shetty Ajay KM, Dinesh MN, Yashaswini M, Gopalakrishna B, Kathyayini N, Sundarayya Y, Vijeth H. Natural Biomass Derived Microporous Activated Carbon Electrodes for Highly Efficient Supercapacitor Applications. ChemistrySelect 2022. [DOI: 10.1002/slct.202201301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
| | | | - Manjappa Yashaswini
- Department of Physics Mangalore University, Mangalagangothri Mangalore 574199 India
| | - Byatarayappa Gopalakrishna
- Centre for Incubation Innovation Research and Consultancy Jyothy Institute of Technology Kanakapura Road Bengaluru 560082 Karnataka India
| | - Nagaraju Kathyayini
- Centre for Incubation Innovation Research and Consultancy Jyothy Institute of Technology Kanakapura Road Bengaluru 560082 Karnataka India
| | - Yanamandra Sundarayya
- Department of Physics School of Sciences Nagaland University Lumami Zunheboto 798627 Nagaland India
| | - Hebri Vijeth
- Department of Physics School of Sciences Nagaland University Lumami Zunheboto 798627 Nagaland India
| |
Collapse
|
9
|
Nandi D, Pulikkalparambil H, Radoor S, Jayakumar A, Kiatisereekul N, Siengchin S. Solvothermal synthesis of nickel titanate nanosphere: crystal structure determination and high-rate supercapacitor performance. Chem Pap 2022. [DOI: 10.1007/s11696-022-02451-2] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
10
|
Tang J, Zhao Y, Sunarso J, Wong NH, Zhou J, Zhuo S. Sustainable Polyurethane‐Derived Heteroatom‐Doped Electrode Materials for Advanced Supercapacitors. ChemElectroChem 2022. [DOI: 10.1002/celc.202200731] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Jianguo Tang
- School of Chemistry and Chemical Engineering Analytical Testing Center Shandong University of Technology Zibo 255049 China
| | - Yi Zhao
- School of Chemistry and Chemical Engineering Analytical Testing Center Shandong University of Technology Zibo 255049 China
| | - Jaka Sunarso
- Research Centre for Sustainable Technologies Faculty of Engineering, Computing and Science Swinburne University of Technology Kuching 93350 Malaysia
| | - Ngie Hing Wong
- Research Centre for Sustainable Technologies Faculty of Engineering, Computing and Science Swinburne University of Technology Kuching 93350 Malaysia
| | - Jin Zhou
- School of Chemistry and Chemical Engineering Analytical Testing Center Shandong University of Technology Zibo 255049 China
| | - Shuping Zhuo
- School of Chemistry and Chemical Engineering Analytical Testing Center Shandong University of Technology Zibo 255049 China
| |
Collapse
|
11
|
Wang C, Yuan X, Guo G, Liang H, Ma Z, Li P. Salt template tuning morphology and porosity of biomass-derived N-doped porous carbon with high redox-activation for efficient energy storage. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.129552] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
12
|
Yu W, Zhang H, Liu C, Meng K, Wu X, Min X, Huang Z, Fang M, Liu Y, Mi R. Effects of Preparation and Activation Manner on Surface Area of Hierarchical Porous Carbons Derived from Nut (Euryale ferox) Shell. ChemistrySelect 2022. [DOI: 10.1002/slct.202200100] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Wenhe Yu
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Haiyan Zhang
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Chenqi Liu
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Kaiyue Meng
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Xiaowen Wu
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Xin Min
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Zhaohui Huang
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Minghao Fang
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Yangai Liu
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| | - Ruiyu Mi
- Beijing Key Laboratory of Materials Utilization of Nonmetallic Minerals and Solid Wastes National Laboratory of Mineral Materials School of Materials Science and Technology China University of Geosciences Beijing 100083 China
| |
Collapse
|
13
|
Liu L, Zheng H, Wu W, Zhang Y, Wang Q, Yang L, Yin H, Lu W, Wang S, Yang X. Three‐Dimensional Porous Carbon Materials from
Coix lacryma‐jobi L
. Shells for High‐Performance Supercapacitor. ChemistrySelect 2022. [DOI: 10.1002/slct.202104189] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Lian Liu
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Hong Zheng
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Engineering Research Center for Biotechnology of Active Substances Ministry of Education Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Wenjie Wu
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Yurun Zhang
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Qin Wang
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Liu Yang
- College of Chemistry Chongqing Normal University Chongqing 401331 China
| | - Haiyan Yin
- College of Chemistry Chongqing Normal University Chongqing 401331 China
| | - Wei Lu
- College of Chemistry Chongqing Normal University Chongqing 401331 China
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
| | - Shuya Wang
- The School of Environmental Engineering Xuzhou Engineering College: Xuzhou University of Technology Xuzhou 221018 China
| | - Xian Yang
- Key Laboratory of Plant-based Functional Materials Development and Application Chongqing Normal University Chongqing 401331 China
- College of Life Sciences Chongqing Normal University Chongqing 401331 China
| |
Collapse
|
14
|
Liu X, Wang X, Miao R, Sun Y, Chen Y, Tang Y, Wan P, Pan J. Al-MOF-derived spindle-like hierarchical porous activated carbon for advanced supercapacitors. Dalton Trans 2022; 51:2538-2546. [PMID: 35075467 DOI: 10.1039/d1dt03395f] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Metal organic frameworks (MOFs) and their derivatives have been widely used in electrochemistry due to their adjustable pore size and high specific surface area (SSA). Herein, a spindle-like hierarchical porous activated carbon (SPC) was synthesized through carbonizing the Al-BTEC precursor and then alkaline washing with NaOH. The fabricated SPC has a uniform shuttle-shaped structure, showing a large BET surface area of 1895 m2 g-1 and an average pore size of 2.4 nm. The SPC product displays a high specific capacitance (SC) of 337 F g-1 at 1 mV s-1 and 334 F g-1 at 1 A g-1. The retention of SC is about 95% after 100 000 cycles when the current density is 50 A g-1, indicating its excellent stability. Furthermore, the assembled symmetrical capacitor with a two-electrode system exhibits a high SC of 173 F g-1 at 1 A g-1 and an energy density of 15.3 W h kg-1 at a power density of 336 W kg-1. This work would provide a new pathway to design and synthesize carbon materials for supercapacitors with excellent properties in the future.
Collapse
Affiliation(s)
- Xingyu Liu
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Xiaoyue Wang
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Rui Miao
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Yanzhi Sun
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Yongmei Chen
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Yang Tang
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Pingyu Wan
- National Fundamental Research Laboratory of New Hazardous Chemicals Assessment and Accident Analysis, Institute of Applied Electrochemistry, Beijing University of Chemical Technology, Beijing 100029, China.
| | - Junqing Pan
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
| |
Collapse
|
15
|
Deng BW, Yang Y, Yin B, Yang MB. Fabrication of a NiO@NF supported free-standing porous carbon supercapacitor electrode using temperature-controlled phase separation method. J Colloid Interface Sci 2021; 594:770-780. [DOI: 10.1016/j.jcis.2021.03.089] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Revised: 03/10/2021] [Accepted: 03/14/2021] [Indexed: 10/21/2022]
|
16
|
Zhao X, Zhang M, Pan W, Yang R, Sun X. Self-Template Synthesis of Nitrogen-Doped Hollow Carbon Nanospheres with Rational Mesoporosity for Efficient Supercapacitors. Materials (Basel) 2021; 14:ma14133619. [PMID: 34209521 PMCID: PMC8269615 DOI: 10.3390/ma14133619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 06/16/2021] [Accepted: 06/16/2021] [Indexed: 11/16/2022]
Abstract
Rational design and economic fabrication are essential to develop carbonic electrode materials with optimized porosity for high-performance supercapacitors. Herein, nitrogen-doped hollow carbon nanospheres (NHCSs) derived from resorcinol and formaldehyde resin are successfully prepared via a self-template strategy. The porosity and heteroatoms in the carbon shell can be adjusted by purposefully introducing various dosages of ammonium ferric citrate (AFC). Under the optimum AFC dosage (30 mg), the as-prepared NHCS-30 possesses hierarchical architecture, high specific surface area up to 1987 m2·g-1, an ultrahigh mesopore proportion of 98%, and moderate contents of heteroatoms, and these features endow it with a high specific capacitance of 206.5 F·g-1 at 0.2 A·g-1, with a good rate capability of 125 F·g-1 at 20 A·g-1 as well as outstanding electrochemical stability after 5000 cycles in a 6 M KOH electrolyte. Furthermore, the assembled NHCS-30 based symmetric supercapacitor delivers an energy density of 14.1 W·h·kg-1 at a power density of 200 W·kg-1 in a 6 M KOH electrolyte. This work provides not only an appealing model to study the effect of structural and component change on capacitance, but also general guidance to expand functionality electrode materials by the self-template method.
Collapse
Affiliation(s)
- Xiang Zhao
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Mu Zhang
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
- Correspondence: (M.Z.); (X.S.)
| | - Wei Pan
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Rui Yang
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Xudong Sun
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
- Correspondence: (M.Z.); (X.S.)
| |
Collapse
|
17
|
Chen A, Pang J, Wei X, Chen B, Xie Y. Fast one-step preparation of porous carbon with hierarchical oxygen-enriched structure from waste lignin for chloramphenicol removal. Environ Sci Pollut Res Int 2021; 28:27398-27410. [PMID: 33506419 DOI: 10.1007/s11356-021-12640-3] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2020] [Accepted: 01/20/2021] [Indexed: 05/24/2023]
Abstract
This work explored the use of porous carbon (PC) materials converted from waste lignin as raw materials for the removal of chloramphenicol (CAP) in water. The PC with controllable pores was prepared through a facile, cost-effective one-step method. The physical and chemical properties of the material were characterized by BET, SEM, FT-IR, and XRD, and the best conditions for preparation were selected based on the results of adsorption experiments. The PC, which was prepared at reaction temperature of 800 °C and the K2CO3/sodium lignosulfonate mass ratio of 4, namely PC-800-4, had a high specific surface area (1305.5 m2 g-1) and pore volume (0.758 cm3 g-1). At a lower initial concentration of CAP (C0 = 120 mg L-1), the maximum adsorption capacity of this adsorbent was 534.0 mg g-1 at 303 K. In addition, PC-800-4 maintained good adsorption performance in a wide pH range and strongly resisted the interference of ions and humic acid. The results showed that the adsorption removal CAP was based on physical adsorption and chemical adsorption as a process supplement. The advantages of wide sources, high efficiency and speed, wide application, and rich oxygen-containing functional groups made the adsorbent have great application potential for removal chloramphenicol from water.
Collapse
Affiliation(s)
- Aixia Chen
- School of Water and Environment, Chang'an University, Xi'an, 710054, China.
- Key Laboratory of Subsurface Hydrology and Ecological Effects in Arid Region, Ministry of Education, Chang'an University, Xi'an, 710054, China.
| | - Jiaju Pang
- School of Water and Environment, Chang'an University, Xi'an, 710054, China
- Key Laboratory of Subsurface Hydrology and Ecological Effects in Arid Region, Ministry of Education, Chang'an University, Xi'an, 710054, China
| | - Xiao Wei
- School of Water and Environment, Chang'an University, Xi'an, 710054, China.
- Key Laboratory of Subsurface Hydrology and Ecological Effects in Arid Region, Ministry of Education, Chang'an University, Xi'an, 710054, China.
| | - Bei Chen
- Haiwei Environmental Technology Company, Chang'an University, Xi'an, 710054, China
| | - Yaping Xie
- School of Water and Environment, Chang'an University, Xi'an, 710054, China
- Key Laboratory of Subsurface Hydrology and Ecological Effects in Arid Region, Ministry of Education, Chang'an University, Xi'an, 710054, China
| |
Collapse
|
18
|
Luo X, Wang Y, Shen Z, Cui L, Wang Y, Li X. Construction of hierarchically porous biomass carbon using iodine as pore-making agent for energy storage. J Colloid Interface Sci 2021; 599:351-9. [PMID: 33962196 DOI: 10.1016/j.jcis.2021.04.108] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2021] [Revised: 04/06/2021] [Accepted: 04/20/2021] [Indexed: 11/20/2022]
Abstract
High specific surface area, hierarchical porosity, high conductivity and heteroatoms doping have been considered as the dominating factors of high-performance carbon-based supercapacitors. Inspired by the blue phenomenon of combination of starch and iodine, iodine is employed firstly as pore-making agent to create micropores for the starch-derived carbon in this study. Based on this mechanism, the hierarchically porous carbon is synthesized through simple solvent heating and high-temperature (1000 °C) carbonization, which achieves high specific surface area of 2989 m2 g-1 (an increase of 39.7% compared to that without iodine) and low electrical resistivity of 0.21 Ω·cm. The assembled symmetric supercapacitors, combined with dual redox-active electrolyte (Bi3+ and Br-), deliver the specific capacitance of 1216 F g-1, energy density of 65.4 Wh kg-1, as well as power density of 787.3 W kg-1 at 2 A g-1. In brief, the abundant biomass resource starch is exploited as carbon source, and the iodine sublimation reaction is conducted to provide more micropores to develop high-performance electrodes of supercapacitors.
Collapse
|
19
|
Nasser R, Zhang GF, Liang H, Zhou NN, Song JM. Lamellar hierarchically porous carbon derived from discarded Barbary figs husk: Preparation, characterization, and its excellent capacitive properties. J Electroanal Chem (Lausanne) 2021. [DOI: 10.1016/j.jelechem.2020.114930] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
20
|
Arjunan A, Subbiah M, Sekar M, VS. AP, Balasubramanian V, Sundara R. Biomass derived hierarchically porous carbon inherent structure as an effective metal free cathode for Li‐O
2
/air battery. Electrochemical Science Adv 2021. [DOI: 10.1002/elsa.202000037] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023] Open
Affiliation(s)
- Ariharan Arjunan
- National Centre for Catalysis Research (NCCR), Department of Chemistry Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
- Alternative Energy and Nanotechnology Laboratory (AENL), Nano Functional Materials Technology Centre (NFMTC), Department of Physics Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| | - Maheswari Subbiah
- Alternative Energy and Nanotechnology Laboratory (AENL), Nano Functional Materials Technology Centre (NFMTC), Department of Physics Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| | - Mahendran Sekar
- National Centre for Catalysis Research (NCCR), Department of Chemistry Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| | - Ajay Piriya VS.
- Alternative Energy and Nanotechnology Laboratory (AENL), Nano Functional Materials Technology Centre (NFMTC), Department of Physics Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| | - Viswanathan Balasubramanian
- National Centre for Catalysis Research (NCCR), Department of Chemistry Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| | - Ramaprabhu Sundara
- Alternative Energy and Nanotechnology Laboratory (AENL), Nano Functional Materials Technology Centre (NFMTC), Department of Physics Indian Institute of Technology Madras Chennai Tamilnadu 600036 India
| |
Collapse
|
21
|
Wu Z, Huang H, Xiong W, Yang S, Huang H, Zou Y, Zhou W, Cheng Z, Wang J, Luo G. One-Pot Synthesis of Glucose-Derived Carbon Coated Ni 3S 2 Nanowires as a Battery-Type Electrode for High Performance Supercapacitors. Nanomaterials (Basel) 2021; 11:nano11030678. [PMID: 33803278 PMCID: PMC7999301 DOI: 10.3390/nano11030678] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/14/2021] [Revised: 03/01/2021] [Accepted: 03/05/2021] [Indexed: 11/29/2022]
Abstract
We report a novel Ni3S2 carbon coated (denoted as NCC) rod-like structure prepared by a facile one-pot hydrothermal method and employ it as a binder free electrode in supercapacitor. We coated carbon with glucose as carbon source on the surface of samples and investigated the suitable glucose concentration. The as-obtained NCC rod-like structure demonstrated great performance with a huge specific capacity of 657 C g−1 at 1 A g−1, preeminent rate capability of 87.7% retention, the current density varying to 10 A g−1, and great cycling stability of 76.7% of its original value through 3500 cycles, which is superior to the properties of bare Ni3S2. The result presents a facile, general, viable strategy to constructing a high-performance material for the supercapacitor applications.
Collapse
Affiliation(s)
- Zhongkai Wu
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
- Nanjing National Laboratory of Solid State Microstructures, School of Physics, Nanjing University, Nanjing 210093, China
- School of Resource, Environmental and Chemical Engineering, Nanchang University, Nanchang 330031, China
| | - Haifu Huang
- Guangxi Novel Battery Materials Research Center of Engineering Technology, Center on Nanoenergy Research, School of Physics Science and Technology, Guangxi University, Nanning 530004, China; (H.H.); (J.W.)
| | - Wenhui Xiong
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
- Nanjing National Laboratory of Solid State Microstructures, School of Physics, Nanjing University, Nanjing 210093, China
| | - Shiming Yang
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
| | - Huanhuan Huang
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
| | - Yaohui Zou
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
| | - Weiping Zhou
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
- Nanjing National Laboratory of Solid State Microstructures, School of Physics, Nanjing University, Nanjing 210093, China
| | - Zhenzhi Cheng
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
- Nanjing National Laboratory of Solid State Microstructures, School of Physics, Nanjing University, Nanjing 210093, China
| | - Jun Wang
- Guangxi Novel Battery Materials Research Center of Engineering Technology, Center on Nanoenergy Research, School of Physics Science and Technology, Guangxi University, Nanning 530004, China; (H.H.); (J.W.)
| | - Guangsheng Luo
- School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China; (Z.W.); (W.X.); (S.Y.); (H.H.); (Y.Z.); (W.Z.); (Z.C.)
- Nanjing National Laboratory of Solid State Microstructures, School of Physics, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100, China
- Correspondence:
| |
Collapse
|
22
|
Zhang C, Kong F, Qiao Y, Zhao Q, Kong A, Shan Y. 3D Graphene-Carbon Nanotube Hybrid Supported Coupled Co-MnO Nanoparticles as Highly Efficient Bifunctional Electrocatalyst for Rechargeable Zn-Air Batteries. Chem Asian J 2020; 15:3535-3541. [PMID: 32929889 DOI: 10.1002/asia.202000913] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 09/14/2020] [Indexed: 10/23/2022]
Abstract
The development of high-efficiency and low-cost catalysts is one of the core and important issues to improve the efficiency of electrochemical reactions on electrodes, and it is also the goal we ultimately pursue in the commercialization of large-scale clean energy technologies, such as metal-air batteries. Herein, a nitrogen-doped graphene oxide (GO)-carbon nanotube (CNT) hybrid network supported coupled Co/MnO nanoparticles (Co/MnO@N-C) catalyst was prepared with a hydrothermal-pyrolysis method. The unique three-dimensional network structure of substrate allowed for the uniform dispersion of Co-MnO nanoparticles in the carbon skeleton. These characters enable the Co/MnO@N-C to possess the excellent bifunctional electrocatalysts. In alkaline electrolyte, the Co/MnO@N-C presents the outstanding oxygen evolution reaction (OER) performance comparable to the commercial RuO2 catalyst and the exceedingly good oxygen reduction reaction (ORR) activity with positive half-wave potential of 0.90 V vs. RHE outperforming commercial Pt/C (0.84 V vs. RHE) and the recently reported analogous electrocatalysts. When it is applied to homemade Zn-air batteries, such a non-noble metal electrocatalyst can deliver a better power density, specific capacity and cycling stability than mixed Pt/C and RuO2 catalyst, and exhibits a wide application prospect and great practical value.
Collapse
Affiliation(s)
- Chaoqi Zhang
- School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200241, P. R. China
| | - Fantao Kong
- School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200241, P. R. China
| | - Yu Qiao
- School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200241, P. R. China
| | - Qingbiao Zhao
- Department of electronic Science, East China Normal University, Shanghai, 200241, P. R. China
| | - Aiguo Kong
- School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200241, P. R. China
| | - Yongkui Shan
- School of Chemistry and Molecular Engineering, East China Normal University, Shanghai, 200241, P. R. China
| |
Collapse
|