210Po concentration in different size fractions of aerosol likely contribution from industrial sources

A Preliminary Assessment of Size-Fractionated Microplastics in Indoor Aerosol—Kuwait’s Baseline

The omnipresence of microplastic (MP) in various environmental samples, including aerosols, has raised public health concerns; however, there is presently very limited information on MPs in indoor aerosol. This paper presents a unique dataset where smaller MPs have been sampled using a six-stage cascade impactor from indoor environments in Kuwait. The MP concentration in the indoor air varied between 3.2 and 27.1 particles m⁻³, and the relative MP concentration decreased linearly from the lowest to the highest size fraction. A significant effect of location was observed for the total number of MPs (F_2,14 = 5.80, p = 0.02) and the inhalable fraction (F_2,14 = 8.38, p = 0.005), while location had no effect on the respirable fraction (F_2,14 = 0.54, p = 0.60). A significant effect of the type of air conditioning used was also observed for the total number of MPs (F_2,19 = 5.58, p = 0.01) and the inhalable fraction (F_2,19 = 6.45, p = 0.008), while location had no effect on the respirable fraction (F_2,19 = 1.30, p = 0.30). For the total number of MPs and the inhalable fraction, the concentration was significantly higher for the split unit air-conditioning as compared to the central air-conditioning plants. The presence/absence of carpets had no significant effect on the MP concentrations (total: F_1,19 = 4.08, p = 0.06; inhalable: F_1,19 = 3.03, p = 0.10; respirable: F_1,19 = 4.27, p = 0.05). The shape was dominantly fibers, with few fragments in lower size fractions. These datasets represent the first baseline information for Kuwait, and the smaller MPs in all the samples further underscore the need to develop standardized protocols of MP collection in the ≤2.5 µm fraction that can have more conspicuous health implications.

Enhanced Polonium Concentrations in Aerosols from the Gulf Oil Producing Region and the Role of Microorganisms

This study provides the first data set of 210Po and 210Pb activity concentrations in the organic and inorganic components of several particle size classes of aerosols collected at two sampling stations in Kuwait. The 210Po concentrations in the aerosols (Bq/g) were similar in all of the particle size classes, but as most (91%) of the aerosol load was made of fine fraction particles of PM0.39-2.5 µm, most of the 210Po activity was carried by this aerosol fraction. At the two sampling stations, the 210Po/210Pb activity concentration ratios in the aerosols were similar, stable around the year, and averaged 1.5 (range 1.2-1.9), much higher than the typical activity concentration ratios of these radionuclides in unmodified (background) aerosols, with Po/Pb < 0.1. The aerosol enrichment in 210Po was likely originated from the oil industry, specifically by gas flaring and oil refining in the Gulf region. Radionuclide analysis in the organic and inorganic components of aerosols showed that the 210Po concentration in the organic component was one order of magnitude higher than the 210Po concentration in the inorganic component, in contrast with 210Pb, which displayed similar concentrations in both organic and inorganic aerosol components. The 210Po carrying organic component of aerosols was investigated and it was found to be largely composed of microorganisms with high microbial and fungi diversity, with the phyla Proteobacteria, Ascomycota, and Basidiomycota being dominant among the bacteria and with Zygomycota being dominant among the fungi. Therefore, we are facing an active concentration process of the atmospheric 210Po carried out by microorganisms, which underlies the 210Po enrichment process in the organic component of aerosols. This bioconcentration of polonium in bioaerosols was unknown.

Petroleum hydrocarbon pollution in sediments from the Gulf and Omani waters: Status and review

This review presents the spatio-temporal distribution of petroleum hydrocarbons including total petroleum hydrocarbon (TPH), total organic carbon (TOC), total aliphatics, unresolved complex mixture (UCM), polycyclic aromatic hydrocarbons (PAHs), and total aromatic hydrocarbons in marine sediments of the Gulf (Iraq, Iran, Kuwait, Saudi Arabia, Bahrain, Qatar, United Arab Emirates and Oman). The TPH ranged between 0.134 and 48,018 μg g^-1 dw where 10-15 μg g^-1 dw was considered as a background concentration. The TOC levels were between 0.04 and 14.96% with a mean concentration of 1.154 ± 0.523%. Total aliphatic hydrocarbon levels were reported between 0.1 and 76 μg g^-1, the 2005 levels that had the largest spatial coverage were between 0.1 and 4.4 μg g^-1. The unresolved complex mixture was very variable post Gulf War but by 2005 most of the Gulf War artifacts had decreased and the levels were between 1.5 and 73.5 μg g^-1. The ƩPAHs in bottom sediments by 2005 were between 0.3 and 3450 ng g^-1. The total aromatics were limited in spatial extent and varied between 1.0 and 14,000 μg g^-1. Most of the locations with elevated contamination levels were near point sources, e.g. oil facilities and ports, and these sites could be categorized as chronically contaminated by oil. This review highlights the paucity of the data both in terms of the spatial extent and temporal coverage, and with several Gulf states undergoing large-scale coastal developments and offshore oil exploration, it will be prudent to undertake regular monitoring of the petroleum hydrocarbons to ensure effective ecosystem functioning as well as seafood and drinking water safety in the Gulf region. The spatial distribution also highlights the lack of uniformity in assessments and the need to support marine pollution assessments in the Gulf countries.

A safe and effective sample collection method for assessment of SARS-CoV-2 in aerosol samples

The role of airborne particles in spread of remains largely unexplored. It has been speculated that the novel corona virus can survive for extended periods in aerosols and its interaction with other viral communities is responsible for additional virulence and infectivity. Therefore, investigations on adsorption, survival, and behavior of the COVID-19 virus within the aerosol community are needed to help understand its spread. In order to explore its spread via aerosols an immediate need is to develop efficient cost-effective sampling methodology for viral aerosols. In view of this we performed the aerosol sample collection through a simplified protocol adapted for its use in laboratory research with minimal biosafety regulations level 1 biosafety level precautions and facilities. In this setup, the air was passed through three gas glass bottles filled with TRIzol @ 30 L⁻¹. The latter served the purpose of collecting and lysing the viral particles trapped in the air. The collected lysate can be transported safely to biosafety regulations level 1 class biosafety level laboratories for downstream processing of ribonucleic acid purification and further analysis such as quantitative polymerase chain reaction or next generation sequencing-based applications. We tested the viability status of the collected aerosols in TRIzol and discovered 90%–100% of the microbial load to be lysed. We expect to recover approximately 1 µg of total ribonucleic acid from 3.6 m³ of aerosols that was successfully amplified using bacterial, fungal, and viral primers. Hence, this technique is safe for use in laboratories that are not complying with the stringent requirements of a virology laboratory.

A review of radioactivity in the Gulf region

The region around the Gulf is moving toward a nuclear energy option with the first nuclear power plant now operational in Bushehr, Iran. Others are soon to be commissioned in Abu Dhabi and in Saudi Arabia. For this reason, radiological safety is becoming a prime concern in the region. This review compiles published data on radionuclide concentrations in seawater, sediment, and biota that have been analyzed in the Gulf countries, along with spatial distribution patterns to enable a synoptic view of the available datasets. The seawater concentrations of ³H, ²¹⁰Po, ²¹⁰Pb, ¹³⁷Cs, and ⁹⁰Sr varied between 130 and 146, 0.48-0.68, 0.75-0.89, 1.25-1.38, 0.57-0.78 mBq L^-1, respectively. The ²²⁶Ra concentration in seawater varied between 0.26 and 3.82 Bq L^-1. Extremely high ⁴⁰K concentrations between 132 and 149 Bq L^-1 have been reported from the Iranian coast compared to 8.9-9.3 Bq L^-1 from the western side of the Gulf. Concentrations of ⁴⁰K, total ²¹⁰Pb, ¹³⁷Cs, ⁹⁰Sr, ²²⁶Ra, ²²⁸Ra, ²³⁸U, ²³⁵U, ²³⁴U, ^239+240Pu, and ²³⁸Pu were determined in sediment and ranged between 353 and 445, 23.6-44.3, 1.0-3.1, 4.8-5.29, 17.3-20.5, 15-16.4, 28.7-31.4, 1.26-1.30, 29.7-30.0, 0.045-0.21 and 0.028-0.03 Bq kg^-1 dry weight, respectively. Significantly higher ¹³⁷Cs values have been reported from the Iranian coast compared to the western coast of the Gulf. Whole fish concentrations of ⁴⁰K, ²²⁶Ra, ²²⁴Ra, ²²⁸Ra, ¹³⁷Cs, ²¹⁰Po and ⁹⁰Sr ranged between 230 and 447, 0.7-7.3, <0.5-6.6, <0.5-15.80, <0.17, 0.88-4.26 and 1.86-5.34 Bq kg^-1 dry weight, respectively. ²¹⁰Po was found to be highly concentrated in several marine organisms with the highest ²¹⁰Po concentration found in the clam Marcia marmorata (193.5-215.6 Bq kg^-1 dry weight). The review highlights the overall paucity of data and inconsistencies in the measurement of radionuclides throughout the Gulf region. Further, since the region is moving toward nuclear energy to meet its increasing energy demand, and coupled with the environmental effects from offshore oil exploration and the heavy impact of climate change, there is a pressing need to undertake a comprehensive marine radioactivity monitoring and assessment effort by conducting a joint cruise in the Gulf with participation of all the adjoining countries. Several recommendations on sampling marine matrixes in the Gulf are given with the aim of improving comparability of radionuclide data from the various studies undertaken in the Gulf region.