Line defect Ce3+ induced Ag/CeO2/ZnO nanostructure for visible-light photocatalytic activity

Doped Ceria Nanomaterials: Preparation, Properties, and Uses

Doping is a powerful strategy for enhancing the performance of ceria (CeO2) nanomaterials in a range of catalytic, photocatalytic, biomedical, and energy applications. The present review summarizes recent developments in the doping of ceria nanomaterials with metal and non-metal dopants for selected applications. The most important metal dopants are grouped into s, p, d, and f block elements, and the relevant synthetic methods, novel properties, and key applications of metal doped ceria are collated and critically discussed. Non-metal dopants are similarly examined and compared with metal dopants using the same performance criteria. The review reveals that non-metal (N, S, P, F, and Cl) doped ceria has mainly been synthesized by calcination and hydrothermal methods, and it has found applications mostly in photocatalysis or as a cathode material for LiS batteries. In contrast, metal doped ceria nanomaterials have been prepared by a wider range of synthetic routes and evaluated for a larger number of applications, including as catalysts or photocatalysts, as antibacterial agents, and in devices such as fuel cells, gas sensors, and colorimetric detectors. Dual/co-doped ceria containing both metals and non-metals are also reviewed, and it is found that co-doping often leads to improved properties compared with single-element doping. The review concludes with a future outlook that identifies unaddressed issues in the synthesis and applications of doped ceria nanomaterials.

Fabrication of chitosan-MnO2‑iridium/nanoceria supported nanoparticles: Catalytic and anti-radical activities

Chitosan capped MnO₂‑iridium nanoparticles supported on nanoceria (Ch-MnO₂-Ir/CeO₂) were fabricated by using combination of colloidal solution and metal displacement galvanic methods. The oxidative degradation of acid orange 7 in aqueous solution by activated persulfate with the as-prepared nanoparticles was studied. The resulting Ch-MnO₂-Ir/CeO₂ with S₂O₈^2-, 80 % degraded 70.06 mg/L of acid orange 7 within 100 min, while at the same time, Ch-Ir, Ch-MnO₂, and Ch-Ir-MnO₂ remained inactive. CeO₂ increased the surface of the catalyst, and also improved the reactive oxygen species site of Ch-Ir-MnO₂ through the activation of S₂O₈^2- with CeO₂. The reversible redox cycle reaction, Ce (III) ↔ Ce (IV) and strong synergistic effect of MnO₂-Ir are responsible for the remarkable catalytic performance of Ch-MnO₂-Ir/CeO₂/S₂O₈^2- system. The degradation of acid orange 7 could be significantly retarded with inorganic (NO₃^- < Cl^- < SO₄^2- < H₂PO₄^- < HCO₃^-) and organic scavengers (ethanol < tertiary butanol < benzoquinone < phenol). Ch-MnO₂-Ir/CeO₂ exhibited excellent stability and reusability. Anti-radical activity of chitosan and Ch-MnO₂-Ir/CeO₂ was evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical. The free radical properties increase with concentration of chitosan and Ch-MnO₂-Ir/CeO₂.

Recent Progress in Metal Oxide-Based Photocatalysts for CO2 Reduction to Solar Fuels: A Review

One of the challenges in developing practical CO₂ photoconversion catalysts is the design of materials with a low cost, high activity and good stability. In this paper, excellent photocatalysts based on TiO₂, WO₃, ZnO, Cu₂O and CeO₂ metal oxide materials, which are cost-effective, long-lasting, and easy to fabricate, are evaluated. The characteristics of the nanohybrid catalysts depend greatly on their architecture and design. Thus, we focus on outstanding materials that offer effective and practical solutions. Strategies to improve CO₂ conversion efficiency are summarized, including heterojunction, ion doping, defects, sensitization and morphology control, which can inspire the future improvement in photochemistry. The capacity of CO₂ adsorption is also pivotal, which varies with the morphological and electronic structures. Forms of 0D, 1D, 2D and 3DOM (zero/one/two-dimensional- and three-dimensional-ordered macroporous, respectively) are involved. Particularly, the several advantages of the 3DOM material make it an excellent candidate material for CO₂ conversion. Hence, we explain its preparation method. Based on the discussion, new insights and prospects for designing high-efficient metallic oxide photocatalysts to reduce CO₂ emissions are presented.

Facile Synthesis of Poly(o-anisidine)/Graphitic Carbon Nitride/Zinc Oxide Composite for Photo-Catalytic Degradation of Congo Red Dye

Growing industry and its effluents create a serious environmental concern. Various industrial wastes such as toxic dyes and volatile organic compounds are posing a threat to a clean environment because of their non-biodegradable nature and high chemical stability. In recent years, the degradation of toxic dyes and drugs by photo-catalysts has gained much importance and proved a successful approach to capture light by hybrid photo-catalysts for decomposing toxic organic molecules. This work presents the synthesis of a poly(o-anisidine)-based composite with graphitic carbon nitride and zinc oxide (POA/g-C3N4/ZnO) and its utilization as a photo-catalyst. Various analytical techniques investigated the synthesized photo-catalysts’ chemical structure, crystallinity, and morphology. The degradation of Congo red dye evaluated the efficiency of the photo-catalyst in an aqueous medium under ultraviolet light. It was revealed that the photo-catalytic activity of the synthesized POA/g-C3N4/ZnO composites show 81.43%, 92.28%, and 87.05% degradation. This sustainable composite will be highly beneficial to treat industrial wastewater to make our environment clean.

Regeneration study of MB in recycling runs over nickel vanadium oxide by solvent extraction for photocatalytic performance for wastewater treatments

Recently, researchers are concentrating on the synthesis of composite materials to enhance the efficiency of the materials in various applications. In this work, nickel vanadium oxide (NiV₂O₆) nanocomposite material is prepared via two methods and the prepared samples have been characterized with basic studies to analyse the effect of preparation method and the reaction time. The XRD studies reveal a polycrystalline growth in both the methods. The broad XRD peaks obtained for samples prepared via hydrothermal method suggests the size reduction and 1D nanostructure formation. The SEM analysis shows the formation of 1D structures in hydrothermal and 3D microsphere structures in solvothermal methods. The possible formation mechanism behind this formation has been discussed in this manuscript. The FTIR peaks in the fingerprint region confirm the formation and vibration of metal-oxygen bonds. The large optical bandgap values obtained from Tauc plot again confirms the formation of nanostructures of the synthesized samples. The photocatalytic activity of nickel vanadium oxide on methylene blue dye under halogen light were performed and, the recyclability of the sample is investigated. It was found from the photocatalytic spectrum that, the samples prepared from both the methods shows a degradation efficiency of more than 80% within 150 min. It was confirmed that the prepared NiV₂O₆ photocatalyst samples does not lose their degradation ability even after five cycles of repeated usage.

Synthesis of the Porous ZnO Nanosheets and TiO2/ZnO/FTO Composite Films by a Low-Temperature Hydrothermal Method and Their Applications in Photocatalysis and Electrochromism

In this paper, porous zinc oxide (ZnO) nanosheets were successfully prepared by a simple low-temperature hydrothermal method. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) tests showed that the synthesized product was ZnO with porous sheet structure. The diameter of porous nanosheets was about 100 nm and the thickness was about 8 nm. As a photocatalyst, the degradation efficiencies of porous ZnO nanosheets for methyl orange (MO), methylene blue (MB) and Rhodamine B (RhB) were 97.5%, 99% and 96.8%, respectively. In addition, the degradation efficiency of ZnO for mixed dyes (Mo, MB and RhB) was satisfactory, reaching 97.7%. The photocatalytic stability of MB was further tested and remained at 99% after 20 cycles. In the experiment, ZnO/FTO (fluorine-doped tin oxide) composites were prepared by using ZnO as the conductive layer. Titanium dioxide (TiO2) was deposited on the surface of ZnO/FTO by electrodeposition, so as to obtain a TiO2/ZnO/FTO composite. By studying the electrochromic properties of this composite, it was found that the TiO2/ZnO/FTO composite shows a large light modulation range (55% at 1000 nm) and excellent cycle stability (96.6% at 200 cycles). The main reason for the excellent electrochromic properties may be the synergistic effect between the porous structure and the polymetallic oxides. This study is helpful to improve the photocatalytic efficiency and cycling stability of metal oxides, improve the transmittance of thin films and provide a new strategy for the preparation of ZnO composite materials with excellent photocatalytic and electrochromic properties.

Facile and Green Synthesis of Silver Quantum Dots Immobilized onto a Polymeric CTS-PEO Blend for the Photocatalytic Degradation of p-Nitrophenol

Immobilization of inorganic metal quantum dots (especially, noble transition metals) onto organic polymers to synthesize nanometal-polymer composites (NMPCs) has attracted considerable attention because of their advanced optical, electrical, catalytic/photocatalytic, and biological properties. Herein, novel, highly efficient, stable, and visible light-active NMPC photocatalysts consisting of silver quantum dots (Ag QDs) immobilized onto polymeric chitosan-polyethylene oxide (CTS-PEO) blend sheets have been successfully prepared by an in situ self-assembly facile casting method as a facile and green approach. The CTS-PEO blend polymer acts as a reducing and a stabilizing agent for Ag QDs which does not generate any environmental chemical pollutant. The prepared x wt % Ag QDs/CTS-PEO composites were fully characterized through X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis, and UV/visible spectroscopy. The characterization results indicated the successful synthesis of the Ag QDs/CTS-PEO composites by the interactions and complexation between x wt % Ag QDs and CTS-PEO blend sheets. TEM images revealed small granules randomly distributed onto the CTS-PEO blend sheets, indicating the immobilization of Ag QDs onto CTS-PEO composites. The presence of a surface plasmon resonance (SPR) band and the shifting of the absorption edge toward higher wavelengths in the UV/vis spectra indicated the formation of x wt % Ag QDs/CTS-PEO composites. The Ag QDs in the polymeric blend matrix led to remarkable enhancement in the optical, thermal, electrical, and photocatalytic properties of x wt % Ag QDs/CTS-PEO composites. The photocatalytic efficiency of the prepared composites was evaluated by the photodegradation of p-nitrophenol (PNP) under simulated sunlight. The maximum photocatalytic degradation reached 91.1% efficiency within 3 h for the 12.0 wt % Ag QDs/CTS-PEO photocatalyst. Generally, the Ag QDs immobilized onto CTS-PEO blend composites significantly enhance the SPR effect and the synergistic effect and reduce the band gap, leading to a high photocatalytic activity.

Recent progress in green and biopolymer based photocatalysts for the abatement of aquatic pollutants

Enormous research studies on the abatement of anthropogenic aquatic pollutants including organic dyes, pesticides, cosmetics, antibiotics and inorganic species by using varieties of semiconductor photocatalysts have been reported in recent decades. Besides, many of these photocatalysts suffer in real applications owing to their high production cost and low stability. In many cases, the photocatalysts themselves are being considered as secondary pollutants. To eliminate these drawbacks, the green synthesized photocatalysts and the use of biopolymers as photocatalyst supports are considered in recent years. In this context, recent developments in green synthesized metals, metal oxides, other metal compounds, and carbon based photocatalysts in water purification are critically reviewed. Furthermore, the pivotal role of biopolymers including chitin, chitosan, cellulose, natural gum, hydroxyapatite, alginate in photocatalytic removal of aquatic pollutants is comprehensively reviewed. The presence of functional groups, electron trapping ability, biocompatibility, natural occurrence, and low production cost are the major reasons for using biopolymers in photocatalysis. Finally, the summary and conclusion are presented along with existing challenges in this research area.

Zinc oxide and zinc oxide-based nanostructures: biogenic and phytogenic synthesis, properties and applications

Zinc oxide nanoparticles (ZnO NPs) are considered as very significant and essential material due to its multifunctional properties, stability, low cost and wide usage. Many green and biogenic approaches for ZnO NPs synthesis have been reported using various sources such as plants and microorganisms. Plants contain biomolecules that can act as capping, oxidizing and reducing agents that increase the rate of reaction and stabilizes the NPs. This review emphasizes and compiles different types of plants and parts of plant used for the synthesis of ZnO and its potential applications at one place. The influence of biogenic and phytogenic synthesized ZnO on its properties and possible mechanisms for its fabrication has been discussed. This review also highlights the potential applications and future prospects of phytogenic synthesized ZnO in the field of energy production and storage, sun light harvesting, environmental remediation, and biological applications.

A Sm-doped Egeria-densa-like ZnO nanowires@PVDF nanofiber membrane for high-efficiency water clean

A biomimetic Egeria-densa-like hybrid composite nanofiber membrane was fabricated to degrade organic pollutants in water, with PVDF nanofibers as stems to provide support, and ZnO nanowires as leaves to provide active sites. The Sm-doped ZnO nanowires@PVDF nanofiber membranes were characterized by FE-SEM, X-ray photoelectron spectroscopy, Fourier transform infrared, X-ray diffraction, and UV-vis diffuse reflectance spectrometer. Compared with the pure ZnO nanowires@PVDF nanofiber membrane, the Sm-doped membrane showed higher photocatalytic performance. The excellent photocatalytic activity was attributed to the increased specific surface area and the decreased bandgap of ZnO nanowires after Sm doping, which inhibited the recombination rate of electrons and holes and improved the absorption of visible light. We found that the superoxide free radicals (O₂^-) played a critical role in photocatalytic degradation. The Sm-doped ZnO nanowires@PVDF nanofiber membrane exhibited good stability after 5 cycles of RhB degradation. We believe such Sm-doped hybrid membrane can work as an effective photocatalyst for wastewater treatment.

Preparation and Photocatalytic Properties of Heterostructured Ceria/Polyaniline Nanoparticles

Cerium dioxide (CeO2, ceria), a promising and abundant catalytic material with high-efficiency, nontoxicity, photochemical stability, and affordability, can be used as a photocatalyst to photocatalytically degrade organics and split water for hydrogen production under ultraviolet (UV) irradiation (about 5% of solar energy). However, the applications of the CeO2 photocatalyst are limited due to low photocatalytic efficiency under sunlight irradiation. In this study, a nanosized CeO2 powder was prepared by the precipitation method. Subsequently, various amounts of polyaniline (PANI) nanoparticles were deposited onto the surface of the CeO2 nanoparticles to form a heterostructure by the polymerization method. The crystal structure, morphology, surface and optical properties of the CeO2/PANI nanoparticles were investigated by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), ultraviolet-visible (UV-Vis) absorption spectroscopy, and photoluminescence (PL). Experimental results demonstrated that PANI deposition improved the light absorption of CeO2 nanoparticles in the visible light region. The heterostructured CeO2/PANI nanoparticle with 4 wt % PANI deposition exhibited optimal photocatalytic activities with a hydrogen production rate of 462 μmolg−1 within 6 h and a methyl orange (MO) degradation rate of 45% within 4 h under visible light irradiation. The photocatalytic mechanisms of the composite powder are also proposed in this report.

CeO2 for Water Remediation: Comparison of Various Advanced Oxidation Processes

Three different Advanced Oxidation Processes (AOPs) have been investigated for the degradation of the imidacloprid pesticide in water: photocatalysis, Fenton and photo-Fenton reactions. For these tests, we have compared the performance of two types of CeO2, employed as a non-conventional photocatalyst/Fenton-like material. The first one has been prepared by chemical precipitation with KOH, while the second one has been obtained by exposing the as-synthetized CeO2 to solar irradiation in H2 stream. This latter treatment led to obtain a more defective CeO2 (coded as “grey CeO2”) with the formation of Ce3+ sites on the surface of CeO2, as determined by Raman and X-ray Photoelectron Spectroscopy (XPS) characterizations. This peculiar feature has been demonstrated as beneficial for the solar photo–Fenton reaction, with the best performance exhibited by the grey CeO2. On the contrary, the bare CeO2 showed a photocatalytic activity higher with respect to the grey CeO2, due to the higher exposed surface area and the lower band-gap. The easy synthetic procedures of CeO2 reported here, allows to tune and modify the physico-chemical properties of CeO2, allowing a choice of different CeO2 samples on the basis of the specific AOPs for water remediation. Furthermore, neither of the samples have shown any critical toxicity.

Synthesis of CuO/ZnO Nanocomposites and Their Application in Photodegradation of Toxic Textile Dye

CuO/ZnO composites are synthesized using a simple mechanochemical combustion method. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FTIR) are used to characterize the prepared oxides. X-ray diffraction reveals that the prepared CuO/ZnO exhibit a wurtzite ZnO crystal structure and the composites are composed of CuO and ZnO. The strong peaks of the Cu, Zn, and O elements are exhibited in the EDX spectrum. The FTIR spectra appear at around 3385 cm−1 and 1637 cm−1, caused by O–H stretching, and 400 cm−1 to 590 cm−1, ascribable to Zn–O stretching. The photocatalytic performances of CuO/ZnO nanocomposites are investigated for the degradation of methylene blue (MB) aqueous solution in direct solar irradiation. The degradation value of MB with 5 wt % CuO/ZnO is measured to be 98%, after 2 h of solar irradiation. The reactive •O2− and •OH radicals play important roles in the photodegradation of MB. Mineralization of MB is around 91% under sunlight irradiation within 7 h. The photodegradation treatment for the textile wastewater using sunlight is an easy technique—simply handled, and economical. Therefore, the solar photodegradation technique may be a very effective method for the treatment of wastewater instead of photodegradation with the artificial and expensive Hg-Xe lamp.

Solar light active silver/iron oxide/zinc oxide heterostructure for photodegradation of ciprofloxacin, transformation products and antibacterial activity

This paper reports on the multitasking potential of a silver/iron oxide/zinc oxide (Ag/Fe₂O₃/ZnO) heterostructure, which was used for the photocatalytic decomposition of ciprofloxacin (CPX) and bacterial disinfection. The Ag/Fe₂O₃/ZnO heterostructure was successfully prepared using a facile precipitation method, and characterization results showed interesting structural, morphological, compositional and luminescent properties. The morphological results of the prepared heterostructure confirmed the deposition of Ag nanoparticles onto the surface of ZnO nanoplates and Fe₂O₃ nanorods. Treatment studies showed that the Ag/Fe₂O₃/ZnO heterostructure had superior solar light driven photocatalytic activity towards CPX degradation (76.4%) compared to bare Fe₂O₃ nanorods (43.2%) and ZnO nanoplates (63.1%), Ag/Fe₂O₃ (28.2%) and Ag/ZnO (64.5%) under optimized conditions (initial CPX concentration: 10 mg/L; pH 4; catalyst loading: 0.3 g/L). Reactive species study confirmed the roles of e^-, h⁺, OH and O₂^- in the photocatalytic degradation process. This photocatalytic behaviour of the Ag/Fe₂O₃/ZnO heterostructure could be attributed to the improved full solar spectrum harvesting capacity, separation of charge carriers and migration of e^-/h⁺ across the heterostructure interface. In addition, the Ag/Fe₂O₃/ZnO heterostructure also showed good antibacterial activity against Escherichia coli (E. coli) under both dark and visible light conditions. This might be due to generation of reactive oxygen species during the reaction. To the best of our knowledge, this is the first study till date on the utilization of Ag/Fe₂O₃/ZnO heterostructure for the photocatalytic degradation of CPX and E. coli bacteria disinfection. Therefore, this work offers an attractive path to design ZnO-based ternary heterostructures for solar-driven applications in wastewater remediation.

Facile synthesis of perovskite CeMnO3 nanofibers as an anode material for high performance lithium-ion batteries

A facile synthesis of perovskite-type CeMnO₃ nanofibers as a high performance anode material for lithium-ion batteries was demonstrated.

Ag/CeO2 Composites for Catalytic Abatement of CO, Soot and VOCs

Nowadays catalytic technologies are widely used to purify indoor and outdoor air from harmful compounds. Recently, Ag–CeO2 composites have found various applications in catalysis due to distinctive physical-chemical properties and relatively low costs as compared to those based on other noble metals. Currently, metal–support interaction is considered the key factor that determines high catalytic performance of silver–ceria composites. Despite thorough investigations, several questions remain debating. Among such issues, there are (1) morphology and size effects of both Ag and CeO2 particles, including their defective structure, (2) chemical and charge state of silver, (3) charge transfer between silver and ceria, (4) role of oxygen vacancies, (5) reducibility of support and the catalyst on the basis thereof. In this review, we consider recent advances and trends on the role of silver–ceria interactions in catalytic performance of Ag/CeO2 composites in low-temperature CO oxidation, soot oxidation, and volatile organic compounds (VOCs) abatement. Promising photo- and electrocatalytic applications of Ag/CeO2 composites are also discussed.