Synthesis of functional ionic liquid modified magnetic chitosan nanoparticles for porcine pancreatic lipase immobilization

Immobilization of pancreatin based on ultrasound-assisted polydopamine functionalized magnetic porous chitosan for the detoxification of ochratoxin A in wine

Ochratoxin A (OTA) is a mycotoxin that globally contaminates fruits and their products. Since OTA have a huge negative impact on health hazards and economic losses, it is imperative to establish an effective and safe strategy for detoxification. Here, pancreatin was immobilized on the surface of polydopamine functionalized magnetic porous chitosan (MPCTS@ PDA) for the degradation of OTA. Compared with free pancreatin, MPCTS@ PDA@ pancreatin displayed excellent thermal stability, acid resistance, storage stability and OTA detoxification in wine (>58%). Moreover, the MPCTS@ PDA@ pancreatin retained 43% initial activity after 8 reuse cycles. There was no significant change in the quality of wine after MPCTS@ PDA@ pancreatin treatment. Moreover, it did not exhibit cytotoxicity which facilitated its application in wine. These results demonstrated that MPCTS@ PDA@ pancreatin can be used as a highly effective biocatalysate for OTA detoxification in wine.

Comparative study on different immobilization sites of immobilized β-agarase based on the biotin/streptavidin system

β-Agarase was biotinylated and immobilized onto streptavidin-conjugated magnetic nanoparticles to provide insights into the effect of immobilization sites on β-agarase immobilization. Results showed that, compared with free enzyme, the stability of prepared immobilized β-agarases through amino or carboxyl activation were both significantly improved. However, the amino-activated immobilized β-agarase showed higher thermostability and catalytic efficiency than the carboxyl-activated immobilized β-agarase. The relative activity of the former was 65.00 % after incubation at 50 °C for 1 h, which was 1.77-fold higher than that of the latter. Additionally, amino-activated immobilization increased the affinity of the enzyme to the substrate, and its maximum reaction rate (0.68 μmol/min) was superior to that of carboxyl-activated immobilization (0.53 μmol/min). The visualization results showed that the catalytic site of β-agarase after carboxyl-activated immobilization was more susceptible to the immobilization process, and the orientation of the enzyme may also hinder substrate binding and product release. These results suggest that by pre-selecting appropriate activation sites and enzyme orientation, immobilized enzymes with higher catalytic activity and stability can be obtained, making them more suitable for the application of continuous production.

Fabrication of uniform Pd nanoparticles immobilized on crosslinked ionic chitosan support as a super-active catalyst toward regioselective synthesis of pyrazole-fused heterocycles

Selection of biodegradable chitosan as a raw material is a smart technique due to its easy modifiability and high renewability. Herein, taking advantage of these functional characteristics, an ionic biopolymer support is produced from copolymerization of allylated chitosan (with 48 % degree of substitution) and polymerizable ionic liquid ([MEVIm]Br). Next, palladium nanoparticles are successfully stabilized in this designed support through a facile manner based on interconnected porous network, ionic nature and rich functional groups. Then, the Pd@CS-PIL structure was utilized as a heterogeneous catalyst for regioselective synthesis of pyrazole-fused heterocycles. The as-synthesized Pd@CS-PIL was characterized by various techniques such as XRD, EDX, FESEM, elemental mapping, TEM, BET, ICP, TGA, and FT-IR to better determine the structure, morphology, purity and physical properties. The obtained results revealed that the proposed nanostructure provides favorable porosity with significant specific surface area (139.2 m2.g-1), Pd nanoparticles with high dispersion (mean diameter ∼ 22.8 nm) and crosslinked nature with good thermal stability (50 % weight loss about 600 °C). Therefore, Pd@CS-PIL nanostructure showed the key features of a super-active catalyst, and pharmaceutical pyrazole-fused scaffolds were produced in favorable yields (86-96 %) under ultrasound conditions.

A critical review of enzymes immobilized on chitosan composites: characterization and applications

Enzymes with industrial significance are typically used in biological processes. However, instability, high sensitivity, and impractical recovery are the major drawbacks of enzymes in practical applications. In recent years, the immobilization technology has attracted wide attention to overcoming these restrictions and improving the efficiency of enzyme applications. Chitosan (CS) is a unique functional substance with biocompatibility, biodegradability, non-toxicity, and antibacterial properties. Chitosan composites are anticipated to be widely used in the near future for a variety of purposes, including as supports for enzyme immobilization, because of their advantages. Therefor this review explores the effects of the chitosan's structure, molecular weight, degree of deacetylation on the enzyme immobilized, effect of key factors, and the enzymes immobilized on chitosan based composites for numerous applications, including the fields of biosensor, biomedical science, food industry, environmental protection, and industrial production. Moreover, this study carefully investigates the advantages and disadvantages of using these composites as well as their potential in the future.

Preparation of imidazole acids grafted chitosan with enhanced antioxidant, antibacterial and antitumor activities

Herein, imidazole acids grafted chitosan derivatives were synthesized, including HACC, HACC derivatives, TMC, TMC derivatives, amidated chitosan and amidated chitosan bearing imidazolium salts. The prepared chitosan derivatives were characterized by FT-IR and ¹H NMR. The tests evaluated the biological antioxidant, antibacterial, and cytotoxic activities of chitosan derivatives. The antioxidant capacity (DPPH radical, superoxide anion radical and hydroxyl radical) of chitosan derivatives was 2.4-8.3 times higher than that of chitosan. The antibacterial capacity against E. coli and S. aureus of cationic derivatives (HACC derivatives, TMC derivatives, and amidated chitosan bearing imidazolium salts) was more active than only imidazole-chitosan (amidated chitosan). In particular, the inhibition effect of HACC derivatives on E. coli was 15.625 μg/mL. Moreover, the series of chitosan derivatives bearing imidazole acids showed certain activity against MCF-7 and A549 cells. The present results suggest that the chitosan derivatives in this paper seem to be promising carrier materials for use in drug delivery systems.

Chitosan-Imidazolium Core-Shell Nanoparticles of Gd-Mn-Mo Polyoxometalate as Novel Potential MRI Nano-Agent for Breast Cancer Detection

Polyoxometalates (POMs) are mineral nanoclusters with many advantages in various diagnostic fields, in particular cancer detection. This study aimed to synthesize and evaluate the performance of gadolinium-manganese-molybdenum polyoxometalate (Gd-Mn-Mo; POM) nanoparticles coated with chitosan-imidazolium (POM@CSIm NPs) for detecting 4T1 breast cancer cells by magnetic resonance imaging in vitro and in vivo. The POM@Cs-Im NPs were fabricated and characterized by FTIR, ICP-OES, CHNS, UV-visible, XRD, VSM, DLS, Zeta potential, and SEM. Cytotoxicity, cellular uptake, and MR imaging in vivo and in vitro of L929 and 4T1 cells were also assessed. The efficacy of nanoclusters was demonstrated using MR images of BALB/C mice bearing a 4T1 tumor in vivo. The evaluation of the in vitro cytotoxicity of the designed NPs showed their high biocompatibility. In fluorescence imaging and flow cytometry, NPs had a higher uptake rate by 4T1 than L929 (p < 0.05). Furthermore, NPs significantly increased the signal strength of MR images, and its relaxivity (r1) was calculated as 4.71 mM^-1 s^-1. MR imaging also confirmed the attachment of nanoclusters to cancer cells and their selective accumulation in the tumor region. Overall, the results showed that fabricated POM@CSIm NPs have considerable potential as an MR imaging nano-agent for early 4T1 cancer detection.

Magnetic Polyethyleneimine Nanoparticles Fabricated via Ionic Liquid as Bridging Agents for Laccase Immobilization and Its Application in Phenolic Pollutants Removal

In this study, polyethyleneimine was combined with magnetic Fe₃O₄ nanoparticles through the bridging of carboxyl-functionalized ionic liquid, and laccase was loaded onto the carrier by Cu²⁺ chelation to achieve laccase immobilization (MCIL-PEI-Cu-lac). The carrier was characterized by Fourier transform infrared spectroscopy, scanning electron microscope, thermogravimetric analysis, X-ray diffraction analysis, magnetic hysteresis loop and so on. MCIL-PEI-Cu-lac has good immobilization ability; its loading and activity retention could reach 52.19 mg/g and 91.65%, respectively. Compared with free laccase, its thermal stability and storage stability have been significantly improved, as well. After 6 h of storage at 60 °C, 51.45% of the laccase activity could still be retained, and 81.13% of the laccase activity remained after 1 month of storage at 3 °C. In the pollutants removal test, the removal rate of 2,4-dichlorophenol (10 mg/L) by MCIL-PEI-Cu-lac could reach 100% within 10 h, and the removal efficiency could still be maintained 60.21% after repeated use for 8 times. In addition, MCIL-PEI-Cu-lac also has a good removal effect on other phenolic pollutants (such as bisphenol A, phenol, 4-chlorophenol, etc.). Research results indicated that an efficient strategy for laccase immobilization to biodegrade phenolic pollutants was developed.

Co-immobilization of electron mediator and laccase onto dialdehyde starch cross-linked magnetic chitosan nanomaterials for organic pollutants’ removal

In this study, an amino-functionalized ionic liquid-modified magnetic chitosan (MACS-NIL) containing 2,2-diamine-di-3-ethylbenzothiazolin-6-sulfonic acid (ABTS) was used as a carrier, and dialdehyde starch (DAS) was used as a cross-linking agent to covalently immobilize laccase (MACS-NIL-DAS-lac), which realized the co-immobilization of laccase and ABTS. The carrier was characterized by Fourier infrared transform spectroscopy, scanning electron microscopy, thermogravimetric analysis, X-ray diffraction analysis, electron paramagnetic resonance, etc. The immobilization efficiency and activity retention of MACS-NIL-DAS-lac could reach 76.7% and 69.8%, respectively. At the same time, its pH stability, thermal stability, and storage stability had been significantly improved. In the organic pollutant removal performance test, the removal rate of 2,4-dichlorophenol (10 mg/L) by MACS-NIL-DAS-lac (1 U) could reach 100% within 6 h, and the removal efficiency could still reach 88.6% after six catalytic runs. In addition, MACS-NIL-DAS-lac also showed excellent degradation ability for other conventional phenolic pollutants and polycyclic aromatic hydrocarbons. The research results showed that MACS-NIL-DAS fabricated by the combination inorganic material, organic biomacromolecules, ionic liquid, and electron mediator could be used as a novel carrier for laccase immobilization and the immobilized laccase showed excellent removal efficiency for organic pollutants.

Immobilization of Interfacial Activated Candida rugosa Lipase Onto Magnetic Chitosan Using Dialdehyde Cellulose as Cross-Linking Agent

Candidarugosa lipase (CRL) was activated with surfactants (sodium dodecyl sulfate [SDS]) and covalently immobilized onto a nanocomposite (Fe₃O₄-CS-DAC) fabricated by combining magnetic nanoparticles Fe₃O₄ with chitosan (CS) using polysaccharide macromolecule dialdehyde cellulose (DAC) as the cross-linking agent. Fourier transform infrared spectroscopy, transmission electron microscope, thermogravimetric analysis, and X-ray diffraction characterizations confirmed that the organic–inorganic nanocomposite support modified by DAC was successfully prepared. Enzymology experiments confirmed that high enzyme loading (60.9 mg/g) and 1.7 times specific enzyme activity could be obtained under the optimal immobilization conditions. The stability and reusability of immobilized CRL (Fe₃O₄-CS-DAC-SDS-CRL) were significantly improved simultaneously. Circular dichroism analysis revealed that the active conformation of immobilized CRL was maintained well. Results demonstrated that the inorganic–organic nanocomposite modified by carbohydrate polymer derivatives could be used as an ideal support for enzyme immobilization.

Phenol biodegradation by immobilized Rhodococcus qingshengii isolated from coking effluent on Na-alginate and magnetic chitosan-alginate nanocomposite

Phenol is a hazardous organic solvent to living organisms, even in its small amounts. In order to bioremediation of phenol from aqueous solution, a novel bacterial strain was isolated from coking wastewater, identified as Rhodococcus qingshengii based on 16S rRNA sequence analysis and named as strain Sahand110. The phenol-biodegrading capabilities of the free and immobilized cells of Sahand110 on the beads of Na-alginate (NA) and magnetic chitosan-alginate (MCA) nanocomposite were evaluated under different initial phenol concentrations (200, 400, 600, 800 and 1000 mg/L). Results illustrated that Sahand110 was able to grow and complete degrade phenol up to 600 mg/L, as the sole carbon and energy source. Immobilized cells of Sahand110 on NA and MCA were more competent than its free cells in degradation of high phenol concentrations, 100% of 1000 mg/L phenol within 96 h, indicating the improved tolerance and performance of the immobilized cells against phenol toxicity. Therefore, the immobilized Sahand110 on the studied beads, especially MCA bead regarding its suitable properties, has significant potential to enhanced bioremediation of phenol-rich wastewaters.

Biodiesel Production Using Homogeneous, Heterogeneous, and Enzyme Catalysts via Transesterification and Esterification Reactions: a Critical Review

The excessive utilization of petroleum resources leads to global warming, crude oil price fluctuations, and the fast depletion of petroleum reserves. Biodiesel has gained importance over the last few years as a clean, sustainable, and renewable energy source. This review provides knowledge of biodiesel production via transesterification/esterification using different catalysts, their prospects, and their challenges. The intensive research on homogeneous chemical catalysts points to the challenges in using high free fatty acids containing oils, such as waste cooking oils and animal fats. The problems faced are soap formation and the difficulty in product separation. On the other hand, heterogeneous catalysts are more preferable in biodiesel synthesis due to their ease of separation and reusability. However, in-depth studies show the limited activity and selectivity issues. Using biomass waste-based catalysts can reduce the biodiesel production cost as the materials are readily available and cheap. The use of an enzymatic approach has gained precedence in recent times. Additionally, immobilization of these enzymes has also improved the statistics because of their excellent functional properties like easy separation and reusability. However, free/liquid lipases are also growing faster due to better mass transfer with reactants. Biocatalysts are exceptional in good selectivity and mild operational conditions, but attractive features are veiled with the operational costs. Nanocatalysts play a vital role in heterogeneous catalysis and lipase immobilization due to their excellent selectivity, reactivity, faster reaction rates owing to their higher surface area, and easy recovery from the products and reuse for several cycles.

Magnetic Nanoparticle-Containing Supports as Carriers of Immobilized Enzymes: Key Factors Influencing the Biocatalyst Performance

In this short review (Perspective), we identify key features of the performance of biocatalysts developed by the immobilization of enzymes on the supports containing magnetic nanoparticles (NPs), analyzing the scientific literature for the last five years. A clear advantage of magnetic supports is their easy separation due to the magnetic attraction between magnetic NPs and an external magnetic field, facilitating the biocatalyst reuse. This allows for savings of materials and energy in the biocatalytic process. Commonly, magnetic NPs are isolated from enzymes either by polymers, silica, or some other protective layer. However, in those cases when iron oxide NPs are in close proximity to the enzyme, the biocatalyst may display a fascinating behavior, allowing for synergy of the performance due to the enzyme-like properties shown in iron oxides. Another important parameter which is discussed in this review is the magnetic support porosity, especially in hierarchical porous supports. In the case of comparatively large pores, which can freely accommodate enzyme molecules without jeopardizing their conformation, the enzyme surface ordering may create an optimal crowding on the support, enhancing the biocatalytic performance. Other factors such as surface-modifying agents or special enzyme reactor designs can be also influential in the performance of magnetic NP based immobilized enzymes.

Highly selective removal and recovery of Ni(II) from aqueous solution using magnetic ion-imprinted chitosan nanoparticles

Nickel (Ni) is one of the most common heavy metals. In this study, nano-sized magnetic ion-imprinted polymers (MIIPs) were synthesized using chitosan as the functional monomer, and used for selective adsorption and recovery of Ni(II) from solutions. The results showed MIIPs possessed high sorption selectivity for Ni(II), and the change in pH (5.0-9.0) exerted insignificant influence on the ion adsorption, allowing almost complete elution and recovery of adsorbed Ni(II) ions by using 0.5% EDTA-Na solution. Moreover, the sorption capacity of the recycled MIIPs decreased by only about 10% after 15 adsorption-desorption cycles. The time required for establishing the adsorption equilibrium was less than 1 h. The sorption process was predominant and endothermic, and could be well described by both Langmuir isotherm model and pseudo-second-order kinetic model. Therefore, the synthesized MIIPs was a suitable adsorbent for highly selective, fast and efficient removal and recovery of low-concentration Ni(II) ions from wastewaters.

Enhancing bio-catalytic performance of lipase immobilized on ionic liquids modified magnetic polydopamine

In this study, imidazolium-based ionic liquid with [tf₂N]^- as the anion was successfully grafted to magnetic polydopamine nanoparticles (MPDA). The prepared materials were well characterized and used as supports for lipase immobilization. The immobilized lipase (PPL-ILs-MPDA) exhibited excellent activity and stability. The specific activity of PPL-ILs-MPDA was 2.15 and 1.49 folds higher than that of free PPL and PPL-MPDA. In addition, after 10 rounds of reuse, the residual activity of PPL-ILs-MPDA was 86.2 % higher than that of PPL-MPDA (75.4 %). Furthermore, the kinetic assay indicated that the affinity between PPL-ILs-MPDA and substrate had increased. Analysis of the secondary structure using circular dichroism was used to explain the mechanism underlying the improvement in the performance of PPL-ILs-MPDA. In addition, the immobilized lipase can be easily separated from the reaction system with a magnet. The observations regarding the development of new supports for lipase immobilization may provide new ideas regarding further studies in this field.

Biosynthesis of chitosan-coated iron oxide (Fe3O4) hybrid nanocomposites from leaf extracts of Brassica oleracea L. and study on their antibacterial potentials

In this study, we prepared chitosan (CS)-coated iron oxide (Fe₃O₄) nanocomposites (NCs) by employing the aqueous leaf extract of Brassica oleracea L. and evaluated its antimicrobial potential. The characterization of hybrid CS-Fe₃O₄ NCs was performed using Fourier-transform infrared spectroscopy (FTIR) analysis to evaluate the chemical bonding of chitosan to nanoparticles (NPs). X-ray photoelectron spectroscopy (XPS) studies revealed the presence of oxidation state elements Fe 2p, O 1s, N 1s, and C 1s, and the zeta potential analysis was found to have well-colloidal stability (+ 76.9 mV) of NCs. Transmission electron microscopy (TEM) analysis determined that CS-Fe₃O₄ NCs were spherical with an average particle size of 27 nm. The X-ray diffractometer (XRD) spectrum ascertained the crystallinity of the hybrid NCs and the vibrating sample magnetometer (VSM) inferred the ferromagnetic behavior of the synthesized NCs. Furthermore, the significant antibacterial efficacy of NPs was demonstrated against foodborne bacterial pathogens, such as Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), and the highest zone of inhibition was observed to be 11.5 mm and 13.5 mm in CS-Fe₃O₄ NCs, respectively. In comparison with Fe₃O₄ NPs, synergistic impacts of CS-Fe₃O₄ NCs displayed great antibacterial potential as exhibited by a clearly enlarged zone. Thus, CS-Fe₃O₄ NCs could be used as efficacious antimicrobial agents in food packaging and food preservation fields.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

From Enzyme Stability to Enzymatic Bioelectrode Stabilization Processes

Bioelectrocatalysis using redox enzymes appears as a sustainable way for biosensing, electricity production, or biosynthesis of fine products. Despite advances in the knowledge of parameters that drive the efficiency of enzymatic electrocatalysis, the weak stability of bioelectrodes prevents large scale development of bioelectrocatalysis. In this review, starting from the understanding of the parameters that drive protein instability, we will discuss the main strategies available to improve all enzyme stability, including use of chemicals, protein engineering and immobilization. Considering in a second step the additional requirements for use of redox enzymes, we will evaluate how far these general strategies can be applied to bioelectrocatalysis.

Different strategies for the lipase immobilization on the chitosan based supports and their applications

Immobilized enzymes have received incredible interests in industry, pharmaceuticals, chemistry and biochemistry sectors due to their various advantages such as ease of separation, multiple reusability, non-toxicity, biocompatibility, high activity and resistant to environmental changes. This review in between various immobilized enzymes focuses on lipase as one of the most practical enzyme and chitosan as a preferred biosupport for lipase immobilization and provides a broad range of studies of recent decade. We highlight several aspects of lipase immobilization on the surface of chitosan support containing various types of lipase and immobilization techniques from physical adsorption to covalent bonding and cross-linking with their benefits and drawbacks. The recent advances and future perspectives that can improve the present problems with lipase and chitosan such as high-price of lipase and low mechanical resistance of chitosan are also discussed. According to the literature, optimization of immobilization methods, combination of these methods with other techniques, physical and chemical modifications of chitosan, co-immobilization and protein engineering can be useful as a solution to overcome the mentioned limitations.

Co-immobilization of laccase and ABTS onto amino-functionalized ionic liquid-modified magnetic chitosan nanoparticles for pollutants removal

This work aims to achieve the co-immobilization of laccase and 2,2-binamine-di-3-ethylbenzothiazolin-6-sulfonic acid (ABTS) to improve removal capability of the biocatalyst for pollutants while avoiding potential pollution caused by ABTS. The laccase was immobilized on magnetic chitosan nanoparticles modified with amino-functionalized ionic liquid containing ABTS (MACS-NIL) based on Cu ion chelation (MACS-NIL-Cu-lac). The carrier was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, x-ray diffraction and etc., and electron paramagnetic resonance confirmed the mediator molecule ABTS on the carrier could also play the role of electron transmission. MACS-NIL-Cu-lac presented relatively high immobilization capacity, enhanced activity (1.7-fold that of free laccase), improved pH and temperature adaptability, and increased thermal and storage stability. The removal performance assay found that MACS-NIL-Cu-lac had a good removal efficiency with 100.0 % for 2,4-dichlorophenol in water at 25 °C, even when the concentration reached 50 mg/L. Reusability study showed that after six catalytic runs, the removal efficiency of 2,4-dichlorophenol by MACS-NIL-Cu-lac could still reach 93.2 %. Additionally, MACS-NIL-Cu-lac exhibited higher catalytic efficiencies with 100.0 %, 70.5 % and 93.3 % for bisphenol A, indole, and anthracene, respectively. The high catalytic performance in pure water system obtained by the novel biocatalyst co-immobilizing laccase and electron mediator ABTS showed greater practical application value.

MTX-Loaded Dual Thermoresponsive and pH-Responsive Magnetic Hydrogel Nanocomposite Particles for Combined Controlled Drug Delivery and Hyperthermia Therapy of Cancer

In recent years, the exploitation of magnetic nanoparticles in smart polymeric matrices have received increased attention in several fields as site-specific drug delivery systems. Here, ultrasonic-assisted emulsion copolymerization of N-isopropylacrylamide (NIPAM) and 2-(N,N-diethylaminoethyl) methacrylate (DEAEMA) in the presence of Fe₃O₄ nanoparticles was employed to prepare pH- and temperature-responsive magnetite nanocomposite particles (MNCPs). The obtained MNCPs were fully characterized by TEM, DSC, FT-IR, VSM, and XRD techniques. They had an average particle size of 70 nm with a lower critical solution temperature of 42 °C and superparamagnetic properties. In addition, MNCPs were loaded with methotrexate (MTX) as an anticancer drug, and their in vitro drug release was studied in different pH values and temperatures and in the presence of an alternating magnetic field. Noteworthy that the highest rate of MTX release was observed at pH 5.5 and 42 °C. Cell viability of the treated MCF-7 human breast cancer cell line with free MTX, MNCPs, and MTX-loaded MNCPs or in combination with magnetic hyperthermia (MHT) and water-based hyperthermia was comparatively studied. The obtained results showed about 17% higher antiproliferative activity for the MTX-loaded MNCPs accompanied by MHT relative to that of free MTX.

Application of magnetic nanoparticles in nucleic acid detection

Nucleic acid is the main material for storing, copying, and transmitting genetic information. Gene sequencing is of great significance in DNA damage research, gene therapy, mutation analysis, bacterial infection, drug development, and clinical diagnosis. Gene detection has a wide range of applications, such as environmental, biomedical, pharmaceutical, agriculture and forensic medicine to name a few. Compared with Sanger sequencing, high-throughput sequencing technology has the advantages of larger output, high resolution, and low cost which greatly promotes the application of sequencing technology in life science research. Magnetic nanoparticles, as an important part of nanomaterials, have been widely used in various applications because of their good dispersion, high surface area, low cost, easy separation in buffer systems and signal detection. Based on the above, the application of magnetic nanoparticles in nucleic acid detection was reviewed.

Ionic liquids-modified cellulose coated magnetic nanoparticles for enzyme immobilization: Improvement of catalytic performance

In this work, ionic liquids-modified magnetic carboxymethyl cellulose nanoparticles (IL-MCMC) were prepared and used as supports for enzyme immobilization. The specific activity of immobilized lipase PPL-IL-MCMC was 1.43 and 2.81 folds higher than that of free PPL and PPL-MCMC, respectively. Water contact angle analysis indicated that the introduction of ionic liquids increased the hydrophobicity of supports, which in tune induced the lid-opening of lipase, allowing its active sites to become more accessible. In addition, the affinity between lipase and substrate immobilized on the prepared supports was enhanced. The same method was also applied to analyze immobilize penicillin G acylase (PGA) to further investigate the general applicability of the method. The results showed that the immobilized PGA exhibited higher stability than many other reported PGAs. The developed composites may be utilized as excellent supports for enzyme immobilization in industrial application.

Gold nanomaterials as key suppliers in biological and chemical sensing, catalysis, and medicine

BACKGROUND

Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.

SCOPE OF REVIEW

The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed.

MAJOR CONCLUSIONS

AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods.

GENERAL SIGNIFICANCE

This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.

Proteins in Ionic Liquids: Reactions, Applications, and Futures

Biopolymer processing and handling is greatly facilitated by the use of ionic liquids, given the increased solubility, and in some cases, structural stability imparted to these molecules. Focussing on proteins, we highlight here not just the key drivers behind protein-ionic liquid interactions that facilitate these functionalities, but address relevant current and potential applications of protein-ionic liquid interactions, including areas of future interest.