Autofluorescence-free chemo/biosensing in complex matrixes based on persistent luminescence nanoparticles

Photonic control of image-guided ferroptosis cancer nanomedicine

Photonic nanomaterials, characterized by their remarkable photonic tunability, empower a diverse range of applications, including cutting-edge advances in cancer nanomedicine. Recently, ferroptosis has emerged as a promising alternative strategy for effectively killing cancer cells with minimizing therapeutic resistance. Novel design of photonic nanomaterials that can integrate photoresponsive-ferroptosis inducers, -diagnostic imaging, and -synergistic components provide significant benefits to effectively trigger local ferroptosis. This review provides a comprehensive overview of recent advancements in photonic nanomaterials for image-guided ferroptosis cancer nanomedicine, offering insights into their strengths, constraints, and their potential as a future paradigm in cancer treatment.

Time-resolved fluorescence nanoprobe of acetylcholinesterase based on ZnGeO:Mn luminescence nanorod modified with metal ions

A novel time-resolved fluorescence nanoprobe (PBMO, PLNR-BSA-Mn2+-OPD) is fabricated for the label-free determination of acetylcholinesterase (AChE). The ZnGeO:Mn persistent luminescence nanorod (PLNR) and Mn(II) are, respectively, exploited as the signal molecule and quencher to construct the PBMO nanopobe using bovine serum albumin (BSA) as the surface-modified shell and o-phenylenediamine (OPD) as the reducing agent. In the presence of H2O2, the persistent luminescence of PBMO at 530 nm is enhanced remarkably within 30 s due to the oxidation of Mn(II). H2O2 can react with thiocholine (TCh), which is produced through the enzymatic degradation of acetylcholine (ATCh) by AChE. The PBMO nanoprobe is successfully applied to the determination of AChE in the linear range of 0.08-10 U L-1, with a detection limit of 0.03 U L-1 (3σ/s). The practicability of this PBMO nanoprobe is confirmed by accurately monitoring AChE contents in human serum samples, giving rise to satisfactory spiking recoveries of 96.2-103.6%.

Competitive ELISA based on pH-responsive persistent luminescence nanoparticles for autofluorescence-free biosensor determination of ochratoxin A in cereals

An accurate and sensitive competitive enzyme-linked immunosorbent assay (ELISA) based on persistent luminescence nanoparticles Zn₂GeO₄:Mn²⁺, Eu³⁺ (ZGME) was developed for detecting ochratoxin A (OTA), a powerfully toxic mycotoxin usually found in grains. As a signal output element of autofluorescence-free biosensors, ZGME can be integrated into ELISA with glucose oxidase (GOx)-binding OTA molecules due to its excellent pH-responsive persistent luminescence. In the absence of OTA, the OTA-GOx conjugate was captured by the anti-OTA monoclonal antibody (anti-OTA mAb) pre-coated on the 96-well plate. The results indicate a decrease in the pH value of the solution, which triggered the quenching of ZGME luminescence due to GOx-dependent gluconic acid production. The presence of OTA inhibited the binding of OTA-GOx on the plate, thus decreasing the production of gluconic acid and increasing the persistent luminous intensity of ZGME. Under the optimized concentrations of anti-OTA mAb and OTA-GOx, quantitative determination of OTA was achieved by plotting the increase or decrease in persistent luminescence intensity of ZGME at 535 nm. In this study, the linear range was from 0.1 μg L^-1 to 63 μg L^-1, and the limit of detection (LOD) was as low as 0.045 μg L^-1. In five food samples (corn grit, brown rice, soybean, rice, and wheat), the results exhibited good stability and repeatability, with a recovery range from 81.3% to 94.4% and a relative standard deviation (RSD) of less than 4.2%. Hence, the established method provides a sensitive, accurate, and autofluorescence-free approach for the determination of OTA in different grain samples.

Cr3+-ZnGa2O4@Pt for Light-Triggered Dark Catalytic Regeneration of Nicotinamide Coenzymes without Other Electron Mediators

Photocatalysts for regeneration of reduced nicotinamide adenine dinucleotide (NADH) usually work with continuous lighting and electron mediators, which causes impracticability under dark conditions, risk of NADH reoxidation, and complex separation. To solve these problems, we present a new catalyst of tiny Pt nanoparticles photodeposited on chromium-doped zinc gallate (CZGO@Pt). Upon being light-triggered, the photogenerated electrons are stored in the traps of CZGO and then gradually released and transferred by Pt to directly reduce NAD⁺ after stoppage of illumination. Three lighting modes are compared to demonstrate the feasibility and advantage of this light-triggered dark catalysis. Within 4 h of reaction, the in-the-dark NADH yield reaches 75.0% under prelighting CZGO@5%Pt and it reaches 80.0% under prelighting CZGO@5%Pt and triethanolamine (TEOA). However, the NADH yield is only 53.5% under continuous lighting of CZGO@5%Pt, TEOA, and NAD⁺. Consequently, the light-triggered dark catalytic regeneration of NADH not only saves energy and operates easily but also significantly elevates the NADH yield. It thus would secure wide interests and applications in places where no light or only intermittent light is available.

Functional Micro-/Nanostructures in Agrofood Science: Precise Inspection, Hazard Elimination, and Potential Health Risks

Nanotechnology, biotechniques, and chemical engineering have arisen as new trends with significant impacts on agrofood science development. Advanced analytical techniques with high sensitivity, specificity, and automation based on micro-/nanomaterials for food hazard elimination have become leading research hotspots in agrofood science. Research progress in micro-/nanomaterials has provided a solid theoretical basis and technical support to solve problems in the industry. However, the rapid development of micro-/nanostructures has also raised concerns regarding potential risks to human health. This review presents the latest advances in the precise inspection and elimination of food hazards from micro-/nanomaterials and discusses the potential threats to human health posed by nanomaterials. The theoretical reference was provided for the application trend of micro-/nanomaterials in the field of agrofood science in the future.

Modulation of inner filter effect between persistent luminescent particles and 2, 3-diaminophenazine for ratiometric fluorescent assay of ascorbic acid and ascorbate oxidase activity

Ascorbate oxidase (AAO) and ascorbic acid (AA) play an important role in delaying lives senescence and metabolism. In this study, a sensitive ratiometric fluorescence sensing system based on the inner filter effect (IFE) between persistent luminescent particles (PLPs) and 2, 3-diaminophenazine (DAP), was designed for the detection of AA and AAO activity. Wherein, PLPs emit blue fluorescence at 475 nm with an excitation wavelength of 370 nm. CoOOH nanosheets with oxidase-like activity can oxidize o-phenylenediamine (OPD) to produce 2, 3-diaminophenazine (DAP) with orange fluorescence at 558 nm. The generated DAP quenched the fluorescence of PLPs by an inner filter effect (IFE). When AA was introduced to the system, CoOOH nanosheets were destroyed and reduced to Co²⁺, thereby inhibiting the oxidization of OPD and effectively preserving the blue fluorescence of PLPs at 475 nm. Besides, AAO can catalyse AA to produce the oxided dehydroascorbic acid (DHA). The dissipative AA can recover orange fluorescence of DAP with weakening the blue fluorescence of PLPs. Therefore, a sensitive ratio fluorescence sensing strategy was established by using PLPs as the reference signal and DAP as a reported signal for the detection of AA and AAO activity. Under optimal conditions, the obtained linear ranges were 1-45 μM and 1-20 mU/mL, and detection limits were 0.2 μM and 0.25 mU/mL, respectively. Finally, this proposed ratiometric fluorescent analytical strategy was used to detect AA in real samples (lemon, orange, tomato), which exhibited satisfactory results comparing with commercial kit.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Persistent Production of Reactive Oxygen Species with Zn2GeO4:Cu Nanorod-Loaded Microneedles for Methicillin-Resistant Staphylococcus Aureus Infectious Wound Healing

Skin wound infection caused by methicillin-resistant Staphylococcus aureus (MRSA) is an urgent concern. Photodynamic therapy has emerged as a promising means of combating bacterial infection. However, continuous or repeated in situ light excitation is required for photosensitizers to produce reactive oxygen species (ROS), and most photosensitizers need sufficient oxygen to produce singlet oxygen (¹O₂), which greatly limits their clinical application. In this work, we report the preparation of Zn₂GeO₄:Cu²⁺ (ZGC) persistent luminescence nanorods with excellent ability for persistent ROS production after stopping excitation for MRSA infectious wound healing. The prepared ZGC nanorods were loaded into dissolvable microneedles (MNs) (ZGC@MNs) to penetrate biofilms and treat MRSA-infected wounds in a minimally invasive manner. ZGC showed a long-persistent photocatalytic effect to constantly produce multiple ROS (¹O₂, hydroxyl radical, and superoxide radical) accompanied by persistent luminescence after a pre-illumination. The MN tips of ZGC@MNs were rapidly dissolved to release ZGC for the continuous production of multiple ROS for at least 48 h with no need for in situ excitation and no special requirement on the amount of oxygen for eliminating MRSA biofilms. The developed ZGC@MN patches exhibited excellent antibacterial activity and biocompatibility for effectively reducing inflammation and promoting wound healing in vivo.

Time-resolved fluorescence determination of albumin using ZnGeO:Mn luminescence nanorods modified with polydopamine nanoparticles

A novel time-resolved fluorescence (TRF) pobe is constructed to detect human serum albumin (HSA) by exploiting ZnGeO:Mn persistent luminescence nanorods (ZnGeO:Mn PLNRs) and polydopamine nanoparticles (PDA NPs). HSA-induced dynamic quenching leads to the fluorescence decrease of ZnGeO:Mn PLNRs, providing the basis for quantitative analysis of HSA. The excellent photo-thermal conversion performance of PDA NPs is helpful to the collision process between ZnGeO:Mn PLNRs and HSA, inducing significant improvement of sensitivity. HSA is quantified by measuring time-resolved fluorescence at 540 nm under excitation of 250-nm light. Under optimal conditions, HSA in the linear range 0.1-100 ng mL^-1 are detected by this PDA-mediated ZnGeO:Mn probe with high sensitivity and selectivity, and the detection limit is 36 pg mL^-1 (3σ/s). The RSD for the quantification of HSA (5 ng mL^-1, n = 11) is 5.2%. The practicability of this TRF probe is confirmed by accurate monitoring HSA contents in urine samples, giving rise to satisfactory spiking recoveries of 96.2-106.0%.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Persistent luminescence nanorods-based autofluorescence-free biosensor for prostate-specific antigen detection

Persistent luminescent nanoparticles (PLNPs) are a class of materials with excellent optical properties, which can continue to emit light for a long time after removing the excitation light source. This feature enables PLNPs to be used for development of biological detection modes without autofluorescence background. In this study, we prepared Zn₂GeO₄: Mn²⁺, Pr³⁺ (ZGOMP) nanorods through a one-pot hydrothermal method. Using the pH-responsive luminescence behavior of ZGOMP, we developed an autofluorescence-free biosensor using ZGOMP as a probe and gluconic acid as a quencher to detect prostate-specific antigen (PSA). Hybridization chain reaction (HCR) and magnetic separation system were introduced in the design to achieve efficient signal amplification. Under the optimal conditions, the as-designed autofluorescence-free sensing platform showed high selectivity, and showed a good luminescence response to PSA within the linear range of 0.001-10 ng/mL at a detection limit of 0.64 pg/mL. The excellent analytical performance shows that the current strategy provides an effective platform for clinical sample analysis.

Functionalized Persistent Luminescence Nanoparticle-Based Aptasensor for Autofluorescence-free Determination of Kanamycin in Food Samples

Selective and sensitive determination of trace kanamycin in complex food samples is of great importance for food safety because of its high toxicity. Here, we report a sensitive and autofluorescence-free persistent luminescence (PL) aptasensor for selective, sensitive, and autofluorescence-free determination of kanamycin in food samples. The aptamer for kanamycin was first conjugated onto the surface of magnetic nanoparticles Fe₃O₄ to serve as the recognition unit as well as the separation element, while the PL nanoparticles ZnGa₂O₄:Cr (PLNPs) were functionalized with the aptamer complementary DNA (cDNA) as the PL signal. The PL aptasensor consisted of the aptamer-conjugated MNPs (MNPs-apt) and cDNA-functionalized PLNPs (PLNPs-cDNA) and combined the merits of the long-lasting luminescence of PLNPs, the magnetic separation ability of MNPs as well as the selectivity of the aptamer, offering a promising approach for autofluorescence-free determination of kanamycin in food samples. The proposed aptasensor showed excellent linearity in the range from 1 pg mL^-1 to 5 ng mL^-1 with a limit of detection of 0.32 pg mL^-1. The precision for 11 replicate determinations of 100 pg mL^-1 kanamycin was 3.1% (relative standard deviation). The developed aptasensor was applied for the determination of kanamycin in milk and honey samples with the recoveries of 95.4-106.3%. The proposed aptasensor is easily extendable to other analytes by simply replacing the aptamer, showing great potential as a universal aptasensor platform for selective, sensitive, and autofluorescence-free detection of hazardous analytes in food samples.

Coloring Afterglow Nanoparticles for High-Contrast Time-Gating-Free Multiplex Luminescence Imaging

Afterglow nanoparticles (AGNPs) possessing inherently long lifetime with tailorable emission colors and uniform size have long been sought due to their time-gating-free high-contrast multiplexing imaging. Herein, via a straightforward template method, it is reported that such multicolor AGNPs can be accomplished. The resultant AGNPs exhibit a series of tunable afterglow emissions, including blue, yellow, green, and white. These multicolor AGNPs are found to be highly bright, enabling them to perform high-contrast multichannel afterglow imaging in vitro and in vivo without the use of any complicated time-gating algorithms or systems, which existing tools are unable to do.

Recent Advances of Persistent Luminescence Nanoparticles in Bioapplications

Persistent luminescence phosphors are a novel group of promising luminescent materials with afterglow properties after the stoppage of excitation. In the past decade, persistent luminescence nanoparticles (PLNPs) with intriguing optical properties have attracted a wide range of attention in various areas. Especially in recent years, the development and applications in biomedical fields have been widely explored. Owing to the efficient elimination of the autofluorescence interferences from biotissues and the ultra-long near-infrared afterglow emission, many researches have focused on the manipulation of PLNPs in biosensing, cell tracking, bioimaging and cancer therapy. These achievements stimulated the growing interest in designing new types of PLNPs with desired superior characteristics and multiple functions. In this review, we summarize the works on synthesis methods, bioapplications, biomembrane modification and biosafety of PLNPs and highlight the recent advances in biosensing, imaging and imaging-guided therapy. We further discuss the new types of PLNPs as a newly emerged class of functional biomaterials for multiple applications. Finally, the remaining problems and challenges are discussed with suggestions and prospects for potential future directions in the biomedical applications.

An ionophore-based persistent luminescent ‘Glow Sensor’ for sodium detection

Optical sensors have numerous positive attributes such as low invasiveness, miniaturizability, biocompatibility, and ease of signal transduction. Recently, there has been a strong research focus on using phosphorescent readout mechanisms, specifically from long-lifetime phosphorescent or ‘persistent luminescence’ particles, for in vitro and in vivo sensors. Persistent luminescence readouts can avoid cellular autofluorescence during biological monitoring, leading to an improved signal-to-noise ratio over a more traditional fluorescence readout. In this study, we show for the first time an ionophore-based optical bulk optode sensor that utilizes persistent luminescence microparticles for ion detection. To achieve this, we combined long-lifetime strontium aluminate-based ‘glow-in-the-dark’ microparticles with a non-fluorescent pH-responsive dye in a hydrophobic plasticized polymer membrane along with traditional ionophore-based optical sensor components to create a phosphorescent ‘Glow Sensor’. The non-fluorescent pH indicator dye gates the strontium aluminate luminescence signal so that it decreases in magnitude with increasing sodium concentration. We characterized the Glow Sensor in terms of emission lifetime, dynamic range, response time, reversibility, selectivity, and stability.

A sodium-selective bulk-optode sensor is created by coupling persistent luminescence microparticles with a pH-sensitive dye through an ionophore-based detection mechanism.