Signal-on dual-potential electrochemiluminescence based on luminol-gold bifunctional nanoparticles for telomerase detection

Tungsten-based polyoxometalate nanoclusters with remarkable reactive oxygen species-scavenging activity efficiently quenched luminol-based electrochemiluminescence for sensitive detection of Her-2

This study aimed to develop a quenching-type electrochemiluminescence (ECL) immunosensor for human epidermal growth factor receptor (Her-2) detection. Firstly, Pd/NiFeOx nanoflowers decorated by in situ formation of gold nanoparticles (Au NPs) and 2D Ti3C2 MXene nanosheets were synthesized (AuPd/NiFeOx/Ti3C2) as carriers to load luminol and primary antibodies. Impressively, AuPd/NiFeOx/Ti3C2 with excellent peroxidase-like activity could accelerate the decomposition of the coreactant H2O2 generating more reactive oxygen species (ROSs) under the working potential from 0 to 0.8 V, resulting in highly efficient ECL emission at 435-nm wavelengths. The introduction of tungsten-based polyoxometalate nanoclusters (W-POM NCs) which exhibit remarkable ROSs-scavenging activity as secondary antibody labels could improve the sensitivity of immunosensors. The ZnO nanoflowers were employed to encapsulate minute-sized W-POM NCs, and polydopamine was self-polymerized on the surface of Zn(W-POM)O to anchor secondary antibodies. The mechanism of the quenching strategy was explored and it was found that W-POM NCs could consume ROSs by the redox reaction of W5+ resulting in W6+. The proposed ECL immunosensor displayed a wide linear response range of 0.1 pg·mL-1 to 50 ng·mL-1, and a low detection limit of 0.036 pg mL-1 (S/N = 3). The recoveries ranged from 93.9 to 99.4%, and the relative standard deviation (RSD) was lower than 10%. This finding is promising for the design of detecting new protein biomarkers.

Amplification-free detection of telomerase activity at the single-cell level via Cas12a-lighting-up single microbeads (Cas12a-LSMBs)

Telomerase overexpresses in almost all cancer cells and has been deemed a universal biomarker for cancer diagnosis and therapy. However, simple and ultrasensitive detection of telomerase activity in single-cells is still a huge challenge. Herein, we wish to report Cas12a-lighting up single microbeads (Cas12a-LSMBs) for ultrasensitive detection of telomerase activity without nucleic acid amplification. In this platform, single-strand DNA reporter (ssDNA reporter)-functionalized single-microbeads (functionalized-SMBs) are employed as a reactor for the trans-cleavage of telomerase-activated CRISPR/Cas12a as well as a reporting unit for fluorescence signal enrichment and visualization. Due to the space-confined effect and signal enrichment mechanism on the surface of the functionalized SMBs, the Cas12a-LSMBs can accurately detect telomerase activity in crude cell lysates with high specificity. Importantly, we have demonstrated that the Cas12a-LSMBs are a reliable and practical tool to detect telomerase activity in single cells and investigate cellular heterogeneity of telomerase activity from cell-to-cell variations.

Surface-tethered electrochemical biosensor for telomerase detection by integration of homogeneous extension and hybridization reactions

The general electrochemical biosensors for telomerase detection require the immobilization of primers on the electrode surface for telomeric extension and hybridization reactions. However, immobilization of primers may suffer from the challenges of hindrance effect and configuration freedom, thus reducing the extension and hybridization efficiency. Herein, we developed a sensitive electrochemical biosensor for telomerase detection by integration of homogeneous extension and hybridization reactions and surface-tethered detection. In the presence of telomerase, the biotinylated primer (bio-primer) was efficiently elongated with telomeric repeats of (TTAGGG)_n at the 3' end in solution. Then, the extension product (bio-DNA) was hybridized with the signal probe DNA modified on the surface of ferrocene (Fc)-capped gold nanoparticle (AuNP). The bio-DNA/DNA/Fc-AuNP hybrids were then tethered by streptavidin-modified electrodes through the specific avidin-biotin interactions, thus producing strong electrochemical signals from the oxidation of Fc tags. The biosensor was successfully used to determine telomerase in HeLa cells and monitor the inhibition efficiency of inhibitor. A wide linear range for the detection of telomerase extracted from HeLa cells was attained. This method has great potential in clinical diagnosis and anti-cancer drug development, and should be beneficial for the fabrication of novel biosensors by integration of homogeneous catalysis and hybridization reactions.

Fabrication of a ratiometric electrochemiluminescence biosensor using single self-enhanced nanoluminophores for the detection of spermine

A ratiometric electrochemiluminescence strategy using a single luminophore for accurate and sensitive biomolecule detection could be immensely valuable in bioanalysis. Herein, an ultrasensitive ratiometric electrochemiluminescence sensing system was fabricated using a self-enhanced luminophore with dual-signal emission for the detection of spermine. A nanocomposite was synthesized by the covalent attachment of N, N-diisopropylethylenediamine onto glutathione-protected Au-Ag bimetallic nanoclusters (DPEA-GSH@Au/Ag BNCs). The nanocomposite exhibited efficient intra-cluster charge transfer to produce strong anodic self-enhanced electrochemiluminescence emission at 0.8 V without external co-reactants. Interestingly, the DPEA@GSH@Au-Ag BNCs exhibited cathodic electrochemiluminescence emission upon the addition of the co-reactant potassium persulfate at -1.6 V, exhibiting stable and efficient dual-signal electrochemiluminescence emission features at a continuous potential window of -1.75 to 1.2 V. Thus, they were used to fabricate a single-luminophore electrochemiluminescence sensor with dual emission. The cathodic emission of the biosensor gradually increased with increasing concentrations of spermine, whereas the anodic electrochemiluminescence intensity remained almost constant, enabling the ratiometric detection of spermine. The fabricated biosensor, with an internal standard, significantly improved the accuracy and reliability of spermine detection in a wide concentration range of 0.85 pM-100 μM, with a low limit of detection of 0.12 pM (S/N = 3) under optimum conditions. This single-luminophore electrochemiluminescence sensing system could be used for the detection of spermine and could guide the construction of ratiometric electrochemiluminescence sensors in the future.

Boosting the electrochemiluminescence of luminol-O2 system by high-intensity focused ultrasound

Electrochemiluminescence (ECL) of luminol is a well-established methodology in analytical chemistry and bioimaging. Developing novel strategies to enhance the ECL signal of this model emitter is a challenging but rewarding task. In this work, we introduced the high-intensity focused ultrasound (HIFU), as a pretreatment means and a non-invasive way to trigger and boost the ECL signal with a 40-fold significant enhancement in the luminol-O₂ system without the addition of exogenous co-reactants. The superoxide anion (O₂^-•) generated in situ by HIFU was the key initiator for boosting the ECL emission as demonstrated in this study for the first time. This promising co-reactant-free strategy could find potential applications for ultrasensitive ECL detection in the analysis of complex biological entities.

BODIPY-based metal-organic frameworks as efficient electrochemiluminescence emitters for telomerase detection

A boron dipyrromethene (BODIPY)-based metal-organic framework (MOF) nanoemitter was for the first time designed with enhanced electrochemiluminescence (ECL) intensity due to the suppression of non-radiative dissipation originating from the ordered arrangement of BODIPY molecules in the framework. Thus, an ECL biosensor was developed for telomerase detection with excellent performance in real samples.

MicroRNA-21 electrochemiluminescence biosensor based on Co-MOF-N-(4-aminobutyl)-N-ethylisoluminol/Ti3C2Tx composite and duplex-specific nuclease-assisted signal amplification

A novel electrochemiluminescence (ECL) biosensor for the determination of microRNA-21 (miRNA-21) was developed, based on a hybrid luminescent Co-MOF-ABEI/Ti₃C₂T_x composite as an ECL luminophore combined with a duplex-specific nuclease (DSN)-assisted signal amplification strategy. The synthesized Co-MOF-ABEI/Ti₃C₂T_x composite carrying N-(4-aminobutyl)-N-ethylisoluminol (ABEI) exhibited strong and stable ECL in the presence of reactive oxygen species (ROS). The ECL biosensor was fabricated by adsorbing Co-MOF-ABEI/Ti₃C₂T_x onto a glassy carbon electrode and covalently coupling the probe DNA onto the surface of the Co-MOF-ABEI/Ti₃C₂T_x-modified electrode. In the presence of the target miRNA-21, the DSN selectively cleaved the complementary DNA section (S1) to miRNA-21, resulting in the release of the transduction section (S2) and the reuse of miRNA-21 in the subsequent amplification cycle. The interaction of the stem-loop structure of the probe DNA with the Co-MOF-ABEI/Ti₃C₂T_x-modified glassy carbon electrode with S2 strands led to the opening of the annular part of the probe DNA. Then, the opened guanine (G)-rich sequences of probe DNA were exposed and folded into a hemin/G-quadruplex DNAzyme in the presence of hemin. The catalysis of H₂O₂ to ROS by the hemin/G-quadruplex DNAzyme significantly enhanced ECL intensity, and this intensity was logarithmically proportional to the concentration of target miRNA-21 between 0.00001 and 10 nM, having a limit of detection of 3.7 fM. The designed ECL biosensor can  detect miRNA-21 extracted from HeLa cells, indicating its promising application in clinical diagnosis and disease prognosis analysis.

An Iron(III)-Based Metal-Organic Gel-Catalyzed Dual Electrochemiluminescence System for Cytosensing and In Situ Evaluation of the VEGF165 Subtype

The recent surge of interest in metal-organic gels (MOGs) has emerged for their soft porous structure, large surface area, and abundant active metal sites, making them a promising candidate for building catalyst matrices. In this work, facilely synthesized Fe(III)-organic gel was directly used as a robust electrode matrix. Detailed studies illustrated that their Fe(III) centers can speed up the electro-oxidation/reduction of the H₂O₂ coreactant to produce reactive oxygen species for enhancing a potential-resolved dual electrochemiluminescence (ECL) emission. Among them, the anodic signal of luminol varied with the cell concentration based on the impedance ECL mechanism, while the cathodic signal of CdS quantum dots traced the VEGF₁₆₅ subtype at cell surface by specific aptamer recognition. Based on this, a ratiometric strategy was proposed for accurate cytosensing by eliminating environmental interference. Moreover, by cooperating these two signals, a novel strategy was developed for direct evaluation of the VEGF₁₆₅ subtype, further realizing rapid drug screening and subtype assessment on different cell lines. This work not only opens up the promising application of MOGs as an effective catalyst matrix but also develops reliable cell assays and protein subtype identification for clinical diagnosis and research.

Sensitive electrochemiluminescence biosensing of polynucleotide kinase using the versatility of two-dimensional Ti3C2TX MXene nanomaterials

Electrochemiluminescence (ECL) is a powerful readout method for the development of (bio)sensors, whose performances depend on the electrode materials and the architecture of its surface. Herein, we demonstrate that the precise control of the sensing interface using the versatility of two-dimensional (2D) transition metal carbides (Ti₃C₂T_X MXene) leads to the enhancement of the ECL signal. This electrode material, which exhibits remarkable structural and electrochemical properties was decorated by the in situ formation of gold nanoparticles (AuNPs) owing to the Ti reducibility. Then, a large amount of the luminophore, Ru(bpy)₃²⁺, was immobilized on Ti₃C₂T_X MXene thanks to its unique negative charge and large specific surface area to obtain Ru-Ti₃C₂T_X-AuNPs. The presented approach exploits the high catalytic activity and excellent conductivity of this 2D nanomaterial as illustrated by the enhanced ECL emission performance of the Ru-Ti₃C₂T_X-AuNPs nanoprobes. Finally, DNA phosphorylated with polynucleotide kinase (PNK) was recognized efficiently by the chelation between Ti and phosphate group. A highly sensitive and selective ECL biosensor was developed for the detection of PNK and the screening of its inhibitors. A lower detection limit of 0.0002 U mL^-1 and wide linear relationship ranged from 0.002 to 10 U mL^-1 were obtained. Furthermore, the practicality of our method was tested in MCF-7 cell lysate, which opens enticing perspectives for future applications of Ti₃C₂T_X materials in the ECL bioanalysis field.

Ultrasensitive fluorescent detection of telomerase activity based on tetrahedral DNA nanostructures as carriers for DNA-templated silver nanoclusters

Precise evaluation of telomerase activity is essential for the clinical diagnosis of early tumors. Herein, we have ingeniously designed a tetrahedral DNA nanostructure, with hairpin-shaped DNA probes rich in cytosine bases at four vertices for telomerase detection. The DNA-templated silver nanoclusters can be formed after the addition of Ag. Then the introduction of telomerase adds the single-strand TTAGGG extension, which can "turn on" the fluorescence of silver nanoclusters quickly by the proximity of the resulting guanine-rich sequences to silver nanoclusters and realize accurate detection of telomerase activity. In this study, integration of high stability tetrahedral DNA nanostructure and fluorescence signal amplification of four DNA-templated silver nanoclusters offers the advantage of high sensitivity, with a low detection limit of 1 cell. More than that, this method is low-cost, facile, and feasible for practical clinical applications.

Ultrasensitive Dual-Signal Detection of Telomerase and MiR-21 Based on Boolean Logic Operations

Telomerase and micro-RNAs (miRNAs) are simultaneously upregulated in a variety of tumor cells and have emerged as promising tumor markers. However, sensitive detection of telomerase and miRNAs in situ remains a great challenge due to their low expression levels. Here, we designed a Boolean logic "AND" signal amplification strategy based on functionalized ordered mesoporous nanoparticles (FOMNs) to achieve ultrasensitive detection of telomerase and miR-21 in living tumor cells. Briefly, the strategy uses telomerase as an input to enable the release of DNA3-ROX-BHQ hairpins by making the wrapping DNA1 form a DNA-a hairpin with the joint participation of dNTPs. Subsequently, DNA2-Ag, DNA3-ROX-BHQ, and the second input miR-21 participated in hybridization chain reaction to amplify fluorescence and Raman signals. Experimental results showed the intensity of output dual signals relevant to the expression levels of telomerase and miR-21. The Ag nanoparticles (AgNPs) not only enhanced the fluorescence signals but also allowed to obtain more sensitive Raman signals. Therefore, even if expression of tumor markers is at a low level, the FOMN-based dual-signal logic operation strategy can still achieve sensitive detection of telomerase and miR-21 in situ. Furthermore, FOMNs can detect miR-21 expression levels in a short time. Consequently, this strategy has a potential clinical application value in detection of tumor markers and the assessment of tumor treatment efficacy.

Electronic Metal-Support Interactions for Electrochemiluminescence Signal Amplification

Au nanoparticle-amplified electrochemiluminescence (ECL) signals are generally realized by nanoparticle morphology modification, functionalization, and nanoalloys formation. It remains a great challenge to utilize the intrinsic catalytic activity of spherical Au nanoparticles for ECL performance improvement. In this work, we prepared the oxygen vacancy-rich CoAl-layered double hydroxide (LDH-O_v)-supported spherical Au nanoparticles via alkali etching of LDH and electrodeposition of Au nanoparticles on the surface of LDH. It was found that the luminol ECL signals of the as-prepared system were significantly enhanced by forming the strong electronic metal-support interaction (EMSI) between Au nanoparticles and LDH-O_v. The further mechanism study demonstrated that EMSI can increase the electron density of interfacial Au atom (Au^δ-) due to a redistribution of charge and promote electron transfer between Au species and LDH-O_v. This study not only introduces EMSI to the ECL field but also paves a new way to the applications of the intrinsic activity of spherical Au nanoparticles in ECL signal amplification. We anticipate that EMSI would be applied to other metal nanocatalysts for the development of highly efficient ECL systems.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

Signal Amplification Strategy Using Atomically Gold-Supported VO2 Nanobelts as a Co-reaction Accelerator for Ultrasensitive Electrochemiluminescent Sensor Construction Based on the Resonance Energy Transfer Platform

Luminol, as a classical luminophore, plays a crucial role in electrochemiluminescence (ECL). However, the traditional luminol-H₂O₂ ECL system suffers from the self-decomposition of H₂O₂ at ambient temperature, which hinders its further application in quantitative analysis. In this work, for the first time, we developed atomically gold-supported two-dimensional VO₂ nanobelts (Au/VO₂) as an advanced co-reaction promoter to speed up the reduction of dissolved oxygen to superoxide radicals (O₂^•-), which react with the luminol anion radical and greatly promote the ECL emission. The ECL resonance energy transfer (ECL-RET) between the hollow manganese dioxide nanospheres and luminol results in a conspicuously decreased ECL signal response, and in the presence of glutathione (GSH), effective redox reaction between manganese dioxide and GSH restores the ECL signal. As a consequence, the designed sensor based on ECL-RET-assisted Au/VO₂ signal amplification showed outstanding performance for "signal-on" detection of GSH in the concentration range of 10^-3 to 10^-10 M, and the detection limit was as low as 0.03 nM. The ECL sensor displayed excellent specificity and was successfully utilized to target GSH in real human serum samples. Importantly, this work not only highlights a powerful avenue for constructing an ultrasensitive ECL sensor for GSH but also provides some inspiration for the further design of high-performance co-reaction accelerators using the ECL technique.

Spatially-resolved dual-potential sandwich electrochemiluminescence immunosensor for the simultaneous determination of carbohydrate antigen 19-9 and carbohydrate antigen 24-2

A new electrochemiluminescence (ECL) immunosensor based on spatially-resolved dual-potential technology was designed for the simultaneous determination of carbohydrate antigen 19-9 (CA 19-9) and carbohydrate antigen 24-2 (CA 242). Luminol-AgNPs@ZIF-67 was used as the anodic probe, and Pt nanoparticle-functionalized graphitic carbon nitride nanosheets (g-C₃N₄@PtNPs) were used as the cathodic probe. Two spatially-resolved areas on the dual-disk glassy carbon electrode (DDGCE) were modified with a AuNPs film by electrodeposition to improve the conductivity of the sensing interface. By recording the ECL responses at two different excitation potentials, the linear range for CA 19-9 was determined to be 0.0001-10 U/mL, with a limit of detection of 31 μU/mL. The linear range for CA 242 was 0.0005-10 U/mL, with a limit of detection of 0.16 mU/mL. Moreover, the ECL immunosensor possessed high selectivity and stability and successfully detected CA 19-9 and CA 242 in real samples. This immunosensor provides a new platform for clinical immunoassays.

A stepwise recognition strategy for the detection of telomerase activity via direct electrochemical analysis of metal-organic frameworks

The detection of telomerase is of great significance for monitoring cell canceration. The conventional methods depend on the extension of telomerase towards its primer to conduct signal transduction. Herein, a specific and reliable detection strategy based on stepwise recognition was developed for tandem detection of metal ions and enzymes. We first synthesized an electrically active metal-organic framework (MIL-101(Fe)), which can act directly as a signal reporter in phosphate buffered saline after being modified with capture DNA (cDNA). When the zinc ion is added as a coenzyme factor, the modified hairpin DNA on the electrode is cleaved by DNAzyme to yield the activated primer. After the addition of telomerase, the cleaved DNA strand would be extended, and the resulting sequence will be hybridized with the signal label of MIL-101(Fe)-cDNA. Therefore, a signal-on strategy for the detection of telomerase was achieved based on the direct electrochemical analysis of MIL-101(Fe). Moreover, this electrochemical biosensor can discriminate telomerase activity among different cell lines. The stepwise recognition ensured the advantages of an electrochemical biosensor such as high sensitivity and specificity during the detection process, providing a novel method for monitoring and diagnosis of diseases.

Carbon Nanocage/Fe3O4/DNA-Based Magnetically Targeted Intracellular Imaging of Telomerase via Catalyzed Hairpin Assembly and Photodynamic-Photothermal Combination Therapy of Tumor Cells

Human telomerase has been identified as a potential tumor biomarker for early cancer diagnosis and cancer progression monitoring. We construct a novel magnetic targeting carbon nanocage/Fe₃O₄/DNA (CNC/Fe₃O₄/DNA) nanoprobe for intracellular imaging of telomerase via the signal amplification strategy catalyzed hairpin assembly (CHA) and for photodynamic-photothermal therapy of tumor cells. Telomerase primer DNA, trigger DNA, hairpin DNA1 (H1), and hairpin DNA2 (H2) were adsorbed to the surface of CNC/Fe₃O₄ nanoparticles (CNC/Fe₃O₄ NPs), and the fluorescence of (chlorin e6) Ce6 was quenched by CNC/Fe₃O₄ NPs. After entering the living cell through magnetic targeting, the telomerase primer DNA can be extended in the presence of highly activated telomerase, leading to the issue of trigger DNA, which can initiate the CHA cycling process followed by the amplification of the fluorescence intensity. The in vitro detection results justified that the proposed nanoprobe showed good sensitivity and selectivity for telomerase. Confocal microscopy studies indicated that such a nanoprobe can be used to detect the activity of telomerase in living cells and the fluorescence signal was stronger under the guidance of a magnetic field. We successfully employed this nanoprobe to monitor the dynamic activity of telomerase in various types of tumor cells and normal cells and to damage tumor cells by photodynamic-photothermal combination therapy, which evidenced that this is a promising biological method for early cancer diagnosis and tumor cell therapy.

Portable glucose meter-utilized label-free and washing-free telomerase assay

We herein describe a portable glucose meter (PGM)-utilized label-free and washing-free method for the facile determination of telomerase activity that relies on the kinase-catalyzed cascade enzymatic reaction (KCER) that transduces the telomerase activity to the glucose level. In the sensor, the telomerase that elongates telomere sequences ((TTAGGG)_n) from the 3'-terminus of telomerase substrate primer (TSP) consumes deoxynucleoside triphosphate (dNTP), which serves as a phosphate source for KCER promoted by hexokinase and pyruvate kinase. Thus, the presence of telomerase protects KCER from working effectively, resulting in the maintenance of an initial, high glucose level that is readily determined using hand-held PGM. With this strategy, the telomerase activities in various types of cell lines were successfully determined with high sensitivity. Furthermore, the ability of this method to screen candidate inhibitors for telomerase activity was also verified.

Dissociable photoelectrode materials boost ultrasensitive photoelectrochemical detection of organophosphorus pesticides

Generally, the photoactive materials are always tightly fixed on the photoelectrode of photoelectrochemical (PEC) sensors to produce excellent photocurrent response, while obvious and constant background currents will appear as well and then hamper the ultrasensitive sensing of target molecules. In this work, ultrasensitive detection of organophosphorus pesticides (OPs) is successfully fulfilled by using dissociable photoelectrode based on CdS nanocrystal-functionalized MnO₂ nanosheets. With the assistance of acetylcholinesterase (AChE), acetylthiocholine (ATCh) is hydrolyzed into thiocholine (TCh) which can effectively etch the ultrathin MnO₂ nanosheets, resulting in the dissociation of MnO₂-CdS from the photoelectrode. Benefiting from the dissociation of photoactive materials, the background photocurrent induced by semiconductor itself dramatically decreases. OPs, as a specific inhibitor for AChE activity, can prevent the generation of TCh and the dissociation of MnO₂ nanosheets, building a relationship between OPs concentration and photocurrent. Under the optimized test conditions, the PEC sensor for the detection of paraoxon displays a wide linear range from 0.05 to 10 ng/mL with a detection limit of 0.017 ng/mL. Furthermore, the PEC sensor shows good sensitivity, stability, and promising application in practical samples.

Recent Advances in Electrochemiluminescence-Based Systems for Mammalian Cell Analysis

Mammalian cell analysis is essential in the context of both fundamental studies and clinical applications. Among the various techniques available for cell analysis, electrochemiluminescence (ECL) has attracted significant attention due to its integration of both electrochemical and spectroscopic methods. In this review, we summarize recent advances in the ECL-based systems developed for mammalian cell analysis. The review begins with a summary of the developments in luminophores that opened the door to ECL applications for biological samples. Secondly, ECL-based imaging systems are introduced as an emerging technique to visualize single-cell morphologies and intracellular molecules. In the subsequent section, the ECL sensors developed in the past decade are summarized, the use of which made the highly sensitive detection of cell-derived molecules possible. Although ECL immunoassays are well developed in terms of commercial use, the sensing of biomolecules at a single-cell level remains a challenge. Emphasis is therefore placed on ECL sensors that directly detect cellular molecules from small portions of cells or even single cells. Finally, the development of bipolar electrode devices for ECL cell assays is introduced. To conclude, the direction of research in this field and its application prospects are described.

Electrochemiluminescence Biosensor for Nucleolin Imaging in a Single Tumor Cell Combined with Synergetic Therapy of Tumor

Nucleolin, a nuclear biological multifunctional protein, plays significant roles in modulating the proliferation, survival, and apoptosis of tumor cells. Different from the traditional electrochemiluminescence (ECL) method, a new ECL biosensor was built to perform ECL imaging of nucleolin in a single HeLa cell with high sensitivity and throughput. Briefly, mesoporous silica nanoparticles (MSN) loaded with doxorubicin (DOX) and phorbol 12-myristate 13-acetate (PMA) were used as drug carriers and could be specifically opened by nucleolin in a HeLa cell. PMA then induced the HeLa cell to produce reactive oxygen species (ROS) and realized ECL imaging of nucleolin. After that, ROS could damage DNA and proteins of the tumor cell and DOX could induce the apoptosis of HeLa cells by inhibiting genetic material, nucleic acid, synthesis. HeLa cells were then efficiently killed by DOX and ROS in a synergetic pathway. Herein, a new ECL biosensor for ECL imaging of nucleolin in a single HeLa cell and synergetic tumor therapy was built.

Design and application of proximity hybridization-based multiple stimuli-responsive immunosensing platform for ovarian cancer biomarker detection

The development of convenient and sensitive multi-readout immunoassay is crucial but highly challenged for meeting the demand of exactness and diversity in early clinical diagnosis. Herein, a split-type multiple stimuli-responsive biosensor was outlined combined with the outstanding superiority of luminol probe-based electrochemiluminescence (ECL) strategy, mimicking enzyme-mediated colorimetric system and portable photothermal effect-induced temperature sensing. Especially, versatile MoS₂ nanosheets (MoS₂ NSs) with distinguished property not only acted as dual-promoter to improve the cathodic ECL of luminol because of its good electrocatalytic activity for dissolved O₂ and favorable photothermal effect for elevating electrode temperature, but also used as nanozyme to regulate subsequent split-type visual colorimetric sensing due to its peroxidase-like activity for the generation of oxidized 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) in ABTS-H₂O₂ colorimetric system. More importantly, the green oxidized ABTS (ABTS^•+) also exhibited strong near-infrared (NIR) laser-triggered photothermal performance, which can be innovatively employed as sensitive photothermal agent for converting biological signals into temperature under the irradiation of NIR laser, accomplishing more simpler temperature quantitative detection by a portable thermometer. Furthermore, on account of the affinity discrepancy of MoS₂ NSs to single-stranded and double-stranded nucleic acids, a label-free proximity hybridization-based multifunctional assay platform was proposed for target detection with human epididymis-specific protein 4 (HE4) as model protein, demonstrating good analytical performances. Significantly, this innovative work not only enriches the foundational study of multi-model biosensing based on the unitary material but also provides an unambiguous guideline for exploring more accurate and simpler point-of-care diagnosis.

In Situ Formation of Gold Nanoparticles Decorated Ti3C2 MXenes Nanoprobe for Highly Sensitive Electrogenerated Chemiluminescence Detection of Exosomes and Their Surface Proteins

In this work, an ultrasensitive electrogenerated chemiluminescence (ECL) biosensor for exosomes and their surface proteins was developed by the in situ formation of gold nanoparticles (AuNPs) decorated Ti₃C₂ MXenes hybrid with aptamer modification (AuNPs-MXenes-Apt). In this strategy, the exosomes were efficiently captured on an exosome recognized CD63 aptamer modified electrode interface. Meanwhile, in situ formation of gold nanoparticles on single layer Ti₃C₂MXenes with aptamer (MXenes-Apt) modification was obtained, in which MXenes acted as both reductants and stabilizer, and no additional reductant and stabilizer involved. The in situ formed AuNPs-MXenes-Apt hybrid not only presented highly efficient recognition of exosomes specifically, but also provide naked catalytic surface with high electrocatalytic activity of gold nanoparticles with predominated (111) facets that significantly improved the ECL signal of luminol. In this way, a highly sensitive ECL biosensor for exosomes detection was constructed ascribing to the synergistic effects of large surface area, excellent conductivity, and catalytic effects of the AuNPs-MXenes-Apt. The detection limit is 30 particles μL^-1 for exosomes derived from HeLa cell line, which was over 1000 times lower than that of conventional ELISA method and the linear range was from 10² particles μL^-1 to 10⁵ particles μL^-1. This ECL sensing platform possessed high selectivity toward exosomes and their surface proteins derived different kinds of tumor cell lines (HeLa cells, OVCAR cells and HepG2 cells), and enabled sensitive and accurate detection of exosomes from human serum, which implied that the ECL biosensor provided a feasible, sensitive, and reliable tool for exosomes detection in exosomes-related clinical diagnostic.

Single-Atom Iron Boosts Electrochemiluminescence

The traditional luminol-H₂ O₂ electrochemiluminescence (ECL) sensing platform suffers from self-decomposition of H₂ O₂ at room temperature, hampering its application for quantitative analysis. In this work, for the first time we employ iron single-atom catalysts (Fe-N-C SACs) as an advanced co-reactant accelerator to directly reduce the dissolved oxygen (O₂ ) to reactive oxygen species (ROS). Owing to the unique electronic structure and catalytic activity of Fe-N-C SACs, large amounts of ROS are efficiently produced, which then react with the luminol anion radical and significantly amplify the luminol ECL emission. Under the optimum conditions, a Fe-N-C SACs-luminol ECL sensor for antioxidant capacity measurement was developed with a good linear range from 0.8 μm to 1.0 mm of Trolox.

Recent advances in co-reaction accelerators for sensitive electrochemiluminescence analysis

In electrochemiluminescence sensing platforms, co-reaction accelerators are specific materials used to catalyze the dissociation of co-reactants into active radicals, which can significantly boost the ECL emission of luminophores.

Dual-Signal Readout of DNA Methylation Status Based on the Assembly of a Supersandwich Electrochemical Biosensor without Enzymatic Reaction

A highly sensitive and selective biosensing system was designed to analyze DNA methylation using a dual-signal readout technique in combination with the signal amplification of supersandwich DNA structure. Through the ingenious design of target-triggered cascade of hybridization chain reaction, one target DNA could initiate the formation of supersandwich structure with multiple signal probes. As a result, one-to-multiple amplification effect was achieved, which conferred high sensitivity to target molecular recognition. Based on probe 1 labeled with ferrocene and probe 2 modified with methylene blue, the target DNA was clearly recognized by two electrochemical signals at independent potentials, which was helpful for the acquisition of more accurate detection results. Taking advantage of bisulfite conversion, the methylation status of cytosine (C) was changed to nucleic acid sequence status, which facilitated the hybridization-based detection without enzymatic reaction. Consequently, the methylated DNA was detected at the femtomolar level with satisfactory analytical parameters. The proposed system was effectively used to assess methylated DNA in human blood serum samples, illuminating the possibility of the sensing platform for applications in disease diagnosis and biochemistry research.

Electrochemiluminescence-Microscopy for microRNA Imaging in Single Cancer Cell Combined with Chemotherapy-Photothermal Therapy

In this work, a new technology using ECL as a microscopy to parallel image miRNA-21 in single cancer cell was built. Phorbol-12-myristate-13-acetate (PMA) loaded gold nanocages (Au NCs) was closed with DNA gate which could be recognized and opened by miRNA-21 in HeLa cell. PMA was then released and further induced HeLa cells to produce reactive oxygen species (ROS; including O^2-•, •OH and H₂O₂ etc.). With H₂O₂ as coreactant and luminol as ECL active material, ECL imaging of intracellular miRNA-21 in single HeLa cell was obtained by EMCCD. Moreover, ROS therapy and photothermal therapy (PPT) of Au NCs@PMA probe were also motivated by in situ miRNA-21 marker instead of the external source. The combined therapy leads to dramatically enhanced ability for cancer cell killing. Au NCs@PMA probe alone could not only achieve a high sensitivity and high resolution ECL-microscopy for imaging of intracellular miRNA-21 for the first time, but also realize the integrated diagnosis like ROS induced tumor damage and photothermal-induced intelligent therapy. This multifunctional platform is believed to be capable of playing an important role in future oncotherapy by the synergistic effects between chemotherapy and photothermal therapy.

A label-free and signal-on electrochemiluminescence strategy for sensitive amyloid-beta assay

Development of a simple, cost-effective and sensitive biosensing strategy is highly desirable to advance the applications in Alzheimer's disease diagnosis. In this paper, we present a simple, label-free and signal-on electrochemiluminescence (ECL) aptasensor for the detection of amyloid-beta (Aβ) peptide using luminol as ECL emitter and in-situ generated reactive oxygen species (ROS) as coreactant via catalytic reaction between Cu²⁺-Aβ and the dissolved O₂ in the presence of ascorbic acid (AA). Aβ₁₆, the binding site of Cu²⁺ in the monomeric full-length Aβ, was used as a model in present study. As a result, this signal-on ECL aptasensor has exhibited favorable analytical performance for Aβ₁₆ monomer with a linear range of 1.0 × 10^-13 mol/L-1.0 × 10^-8 mol/L and a limit of detection of 3.5 × 10^-14 mol/L (S/N=3). Furthermore, the proposed biosensor was also able to detect the full length Aβ₄₀ not only in the phosphate buffer saline (PBS) solution but also in human serum. The presented biosensor represents a promising, simple, turn-on and label-free diagnostic tool for blood analysis.

Highly sensitive fluorescence biosensor for intracellular telomerase detection based on a single patchy gold/carbon nanosphere via the combination of nanoflare and hybridization chain reaction

How to in situ detect intracellular telomerase activity with high sensitivity still faces many challenges. This paper constructs a new fluorescence biosensing platform for the sensitive detection of intracellular telomerase activity via the combination of nanoflare and hybridization chain reaction (HCR)-based signal amplification on a single patchy gold/carbon nanosphere (PG/CNS), which has two or more distinct parts and allows hybridized-DNA (HS-DNA/Primer-DNA/Flare-DNA) and H1/H2-DNA (a pair of cross complementary DNA hairpins) to bind onto their surfaces via Au-S bond and electrostatic interaction, respectively. In the presence of telomerase, Primer-DNA (telomerase primer) extends at its 3' end to produce a telomeric repeated sequence, resulting in the release of Flare-DNA followed by the recovery of the fluorescence. Subsequently, the released Flare-DNA further initiates cross hybridization of H1 and H2 DNA from mimic-HCR system to amplify the fluorescence signal. The in vivo confocal microscopy studies demonstrate that resulting sensor can enter into the cancer cells such as A549 cells, and lead to the increase in luminescence, which is stronger than the sensor without the HCR-based signal amplification system. A linear relationship between the fluorescence intensity and the amount of A549 cells is observed, and the limit of detection of the sensor reaches about 280 A549 cells.

Advances in DNA/RNA detection using nanotechnology

Specific nucleic acid detection in vitro or in vivo has become increasingly important in the discovery of genetic diseases, diagnosing pathogen infection and monitoring disease treatment. One challenge, however, is that the amount of target nucleic acid in specimens is limited. Furthermore, direct sensing methods are also unable to provide sufficient sensitivity and specificity. Fortunately, due to advances in nanotechnology and nanomaterials, nanotechnology-based bioassays have emerged as powerful and promising approaches providing ultra-high sensitivity and specificity in nucleic acid detection. This chapter presents an overview of strategies used in the development and integration of nanotechnology for nucleic acid detection, including optical and electrical detection methods, and nucleic acid assistant recycling amplification strategies. Recent 5 years representative examples are reviewed to demonstrate the proof-of-concept with promising applications for DNA/RNA detection and the underlying mechanism for detection of DNA/RNA with the higher sensitivity and selectivity. Furthermore, a brief discussion of common unresolved issues and future trends in this field is provided both from fundamental and practical point of view.

An ultrasensitive electrochemiluminescence biosensor for MicroRNA detection based on luminol-functionalized Au NPs@ZnO nanomaterials as signal probe and dissolved O2 as coreactant

In this work, the ZnO nanostars with excellent catalytic performance were firstly used as the coreaction accelerator of luminol-O₂ system to construct a biosensor for ultrasensitively detecting microRNA-21 (miRNA-21) in cancer cells. Specifically, ZnO nanostars could expedite the reduction of dissolved O₂, generating more reactive oxygen species (ROSs) to extremely promote electrochemiluminescence (ECL) luminous efficiency of luminol. Thus luminol-functionalized Au NPs@ZnO (L-Au NPs@ZnO) nanomaterials were employed as signal probe to fabricate sensing nano-platform for achieving significant ECL emission as "signal on" state. Moreover, upon the addition of a tiny minority of target miRNA-21, massive ferrocene (Fc) could be immobilized on the sensing interface through hybridization chain reaction (HCR) triggered-DNA dendrimers self-assembly, in which Fc consumed dissolved O₂ for prominently quenching the ECL emission of signal probe and then reached a "signal off" state. As a result, the biosensor performed a good linearity in 100 aM - 100 pM and a low limit of detection (LOD) down to 18.6 aM. In general, this work utilized a new coreaction accelerator as an efficient amplification approach for ultrasensitively detecting target analyses, providing a promising approach in luminol-centric ECL bioanalysis fields.

All-in-One Synchronized DNA Nanodevices Facilitating Multiplexed Cell Imaging

Multifunctional DNA nanodevices perform ever more tasks with applications ranging from in vitro biomarker detection to in situ cell imaging. However, most developed ones consist of a series of split building blocks, which suffer from asynchronous behaviors in complicated cellular microenvironments (endocytosis pathway, diffusion-limited cytoplasm, etc.), causing the loss of stoichiometric information and additional postassembly processes. Herein, we constructed all-in-one DNA nanodevices to achieve synchronous multiplexed imaging. All DNA components, including two sets of probe modules (each containing target-specific walkers, i.e., hairpin tracks with chemically damaged bases), are modified on individual gold nanoparticles. This design not only enables their integrated internalization into cells, circumventing inhomogeneous distribution of different building blocks and increasing the local concentrations of the interacting modules, but also avoids the impact of stochastic diffusion in viscous cytoplasm. A couple of intracellular enzymes in situ actuate the synchronized motion of the modules, all on-particle, after specific recognition of intracellular targets (such as RNAs and proteins), thus facilitating synchronized, multiplexed cell imaging. Finally, the proposed all-in-one nanodevices were successfully applied to monitor intracellular microRNA-21 and telomerase expression levels. The flexible design can be extended to detect other cytoplasmic molecules and monitor related pathways by simply changing the sequences.