Defects in Carbon-Based Materials for Electrocatalysis: Synthesis, Recognition, and Advances

Biotemplated fabrication of N/O co-doped porous carbon confined spinel NiFe2O4 heterostructured mimetics for triple-mode sensing of antioxidants and ameliorating packaging properties

In this work, shrimp shell-derived magnetic NiFe2O4/N, O co-doped porous carbon nanozyme with superior oxidase (OXD)-like activity was prepared and used for colorimetric/photothermal/smartphone dual-signal triple-mode detection of antioxidants in fruits and beverages. The magnetic NiFe2O4/N, O co-doped porous carbon (MNPC) material was triumphantly fabricated using a combined in-situ surface chelation and pyrolysis method. The resultant MNPC composite exhibits a superior OXD-like activity, which can effectively oxidize 3,3',5,5'-tetramethylbenzidine (TMB) for yielding colorimetric/temperature dual-signal (CTDS) in absence of H2O2. This CTDS output sensor was successfully used for the determination of ascorbic acid and tannic acid. The proposed CTDS sensor with good specificity and high sensitivity can satisfy different on-site analysis requirements. Interestingly, the MNPC as a sustainable filler was further used for improving packaging properties of polyvinyl alcohol film. In short, this work offers a large-scale and cheap method to fabricate magnetic carbon-based nanozyme for monitoring antioxidants and ameliorating packaging properties.

Highly Curved Defect Sites: How Curvature Effect Influences Metal-Free Defective Carbon Electrocatalysts

Topological defects are widely recognized as effective active sites toward a variety of electrochemical reactions. However, the role of defect curvature is still not fully understood. Herein, carbon nanomaterials with rich topological defect sites of tunable curvature is reported. The curved defective surface is realized by controlling the high-temperature pyrolytic shrinkage process of precursors. Theoretical calculations demonstrate bending the defect sites can change the local electronic structure, promote the charge transfer to key intermediates, and lower the energy barrier for oxygen reduction reaction (ORR). Experimental results convince structural superiority of highly-curved defective sites, with a high kinetic current density of 22.5 mA cm-2 at 0.8 V versus RHE for high-curvature defective carbon (HCDC), ≈18 times that of low-curvature defective carbon (LCDC). Further raising the defect densities in HCDC leads to the dual-regulated products (HCHDC), which exhibit exceptionally outstanding ORR activity in both alkaline and acidic media (half-wave potentials: 0.88 and 0.74 V), outperforming most of the reported metal-free carbon catalysts. This work uncovers the curvature-activity relationship in carbon defect for ORR and provides new guidance to design advanced catalysts via curvature-engineering.

Enhanced Activity of Small Pt Nanoparticles Decorated with High-Loading Single Fe─N4 for Methanol Oxidation and Oxygen Reduction via the Assistive Active Sites Strategy

Decorating platinum (Pt) with a single atom offers a promising approach to tailoring their catalytic activity. In this study, for the first time, an innovative assistive active sites (AAS) strategy is proposed to construct high-loading (3.46wt.%) single Fe─N4 as AAS, which are further hybridized with small Pt nanoparticles to enhance both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) activities. For ORR, the target catalyst (Pt/HFeSA-HCS) exhibits a higher mass activity (MA) of 0.98 A mgPt -1 and specific activity (SA) of 1.39 mA cmPt -2 at 0.90 V versus RHE. As for MOR, Pt/HFeSA-HCS shows exceptional MA (3.21 A mgPt -1) and SA (4.27 mA cmPt -2) at peak values, surpassing commercial Pt/C by 15.3 and 11.5 times, respectively. The underlying mechanism behind this AAS strategy is to find that in MOR, Fe─N4 promotes water dissociation, generating more *OH to accelerate the conversion of *CO to CO2. Meanwhile, in ORR, Fe─N4 acts as a competitor to adsorb *OH, weakening Pt─OH bonding and facilitating desorption of *OH on the Pt surface. Constructing AAS that can enhance dual functionality simultaneously can be seen as a successful "kill two birds with one stone" strategy.

Fe, N, S co-doped carbon network derived from acetate-modified Fe-ZIF-8 for oxygen reduction reaction

In this work, potassium acetate (KAc) was added during the synthesis of a Zn-Fe based metal-organic framework (Fe-ZIF-8) to increase the fixed amount of Fe while simultaneously enhancing the number of pores. Electrospinning was utilized to embed KAc-modified Fe-ZIF-8 (Fe-ZIF-8-Ac) into the polyacrylonitrile nanofiber mesh, to obtain a network composite (Fe@NC-Ac) with hierarchical porous structure. Fe@NC-Ac was co-pyrolyzed with thiourea, resulting in Fe, N, S co-doped carbon electrocatalyst. The electrochemical tests indicated that the prepared catalyst displayed relatively remarkable oxygen reduction reaction (ORR) catalytic activity, with an onset potential (Eonset) of 1.08 V (vs. reversible hydrogen electrode, RHE) and a half-wave potential (E1/2) of 0.94 V, both higher than those of the commercial Pt/C (Eonset = 0.95 V and E1/2 = 0.84 V), respectively. Assembled into Zn-air batteries, the optimized catalyst exhibited higher open circuit voltage (1.698 V) and peak power density (90 mW cm-2) than those of the commercial 20 wt% Pt/C (1.402 V and 80 mW cm-2), respectively. This work provided a straightforward manufacturing strategy for the design of hierarchical porous carbon-based ORR catalysts with desirable performance.

Inter-site structural heterogeneity induction of single atom Fe catalysts for robust oxygen reduction

Metal-nitrogen-carbon catalysts with hierarchically dispersed porosity are deemed as efficient geometry for oxygen reduction reaction (ORR). However, catalytic performance determined by individual and interacting sites originating from structural heterogeneity is particularly elusive and yet remains to be understood. Here, an efficient hierarchically porous Fe single atom catalyst (Fe SAs-HP) is prepared with Fe atoms densely resided at micropores and mesopores. Fe SAs-HP exhibits robust ORR performance with half-wave potential of 0.94 V and turnover frequency of 5.99 e-1s-1site-1 at 0.80 V. Theoretical simulations unravel a structural heterogeneity induced optimization, where mesoporous Fe-N4 acts as real active centers as a result of long-range electron regulation by adjacent microporous sites, facilitating O2 activation and desorption of key intermediate *OH. Multilevel operando characterization results identify active Fe sites undergo a dynamic evolution from basic Fe-N4 to active Fe-N3 under working conditions. Our findings reveal the structural origin of enhanced intrinsic activity for hierarchically porous Fe-N4 sites.

Biomass-Derived Catalytically Active Carbon Materials for the Air Electrode of Zn-air Batteries

Given the growing environmental and energy problems, developing clean, renewable electrochemical energy storage devices is of great interest. Zn-air batteries (ZABs) have broad prospects in energy storage because of their high specific capacity and environmental friendliness. The unavailability of cheap air electrode materials and effective and stable oxygen electrocatalysts to catalyze air electrodes are main barriers to large-scale implementation of ZABs. Due to the abundant biomass resources, self-doped heteroatoms, and unique pore structure, biomass-derived catalytically active carbon materials (CACs) have great potential to prepare carbon-based catalysts and porous electrodes with excellent performance for ZABs. This paper reviews the research progress of biomass-derived CACs applied to ZABs air electrodes. Specifically, the principle of ZABs and the source and preparation method of biomass-derived CACs are introduced. To prepare efficient biomass-based oxygen electrocatalysts, heteroatom doping and metal modification were introduced to improve the efficiency and stability of carbon materials. Finally, the effects of electron transfer number and H2 O2 yield in ORR on the performance of ZABs were evaluated. This review aims to deepen the understanding of the advantages and challenges of biomass-derived CACs in the air electrodes of ZABs, promote more comprehensive research on biomass resources, and accelerate the commercial application of ZABs.

Boosted hydrogen evolution kinetics of heteroatom-doped carbons with isolated Zn as an accelerant

Carbon-based single-atom catalysts, a promising candidate in electrocatalysis, offer insights into electron-donating effects of metal center on adjacent atoms. Herein, we present a practical strategy to rationally design a model catalyst with a single zinc (Zn) atom coordinated with nitrogen and sulfur atoms in a multilevel carbon matrix. The Zn site exhibits an atomic interface configuration of ZnN4S1, where Zn's electron injection effect enables thermal-neutral hydrogen adsorption on neighboring atoms, pushing the activity boundaries of carbon electrocatalysts toward electrochemical hydrogen evolution to an unprecedented level. Experimental and theoretical analyses confirm the low-barrier Volmer-Tafel mechanism of proton reduction, while the multishell hollow structures facilitate the hydrogen evolution even at high current intensities. This work provides insights for understanding the actual active species during hydrogen evolution reaction and paves the way for designing high-performance electrocatalysts.

Vacancy-induced catalytic mechanism for alcohol electrooxidation on nickel-based electrocatalyst

Owing to outstanding performances, nickel-based electrocatalysts are commonly used in electrochemical alcohol oxidation reactions (AORs), and the active phase is usually vacancy-rich nickel oxide/hydroxide (NiOx Hy ) species. However, researchers are not aware of the catalytic role of atom vacancy in AORs. Here, we study vacancy-induced catalytic mechanisms for AORs on NiOx Hy species. As to AORs on oxygen-vacancy-poor β-Ni(OH)2 , the only redox mediator is electrooxidation-induced electrophilic lattice oxygen species, which can only catalyze the dehydrogenation process (e.g., the electrooxidation of primary alcohol to carboxylic acid) instead of the C-C bond cleavage. Hence, vicinal diol electrooxidation reaction involving the C-C bond cleavage is not feasible with oxygen-vacancy-poor β-Ni(OH)2 . Only through oxygen vacancy-induced adsorbed oxygen-mediated mechanism, can oxygen-vacancy-rich NiOx Hy species catalyze the electrooxidation of vicinal diol to carboxylic acid and formic acid accompanied with the C-C bond cleavage. Crucially, we examine how vacancies and vacancy-induced catalytic mechanisms work during AORs on NiOx Hy species.

Engineering Non-precious Trifunctional Cobalt-Based Electrocatalysts for Industrial Water Splitting and Ultra-High-Temperature Flexible Zinc-Air Battery

Developing efficient, robust, and cost-effective trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) at high current density and high temperature is crucial for water splitting at industry-level conditions and ultra-high-temperature Zinc-air battery (ZAB). Herein, cobalt nanoparticles well-integrated with nitrogen-doped porous carbon leaves (Co@NPCL) by direct annealing of core-shell bimetallic zeolite imidazolate frameworks is synthesized. Benefiting from the homogeneous distribution of metallic Co nanoparticles, the conductive porous carbon, and the doped N species, the as-fabricated Co@NPCL catalysts exhibit outstanding trifunctional performances with low overpotentials at 10 mA cm-2 for HER (87 mV) and OER (276 mV), long-lasting lifetime of over 2000 h, and a high half-wave potential of 0.86 V versus RHE for ORR. Meanwhile, the Co@NPCL catalyst can serve as both cathode and anode for water splitting at industrial conduction, and exhibit a stable cell voltage of 1.87 V to deliver a constant catalytic current of 500 mA cm-2 over 60 h. Moreover, the excellent trifunctional activity of Co@NPCL enables the flexible ZAB to operate efficiently at ultra-high temperature of 70 °C, delivering 162 mW cm-2 peaks power density and an impressive stability for 4500 min at 2 mA cm-2 .

Accelerated removal of sulfadiazine by heterogeneous electro-Fenton system with Pt-FeOX/graphene single-atom alloy cathodes

Heterogeneous electro-Fenton (EF) process is emerging as an attractive treatment technology for removal of sulfadiazine (SDZ), in which in situ generation of H2O2 and Fe(II) are crucial steps. In this study, Pt-FeOX/G was synthesized as a heterogeneous EF catalyst by incorporating Pt single atoms into a FeOX nanocrystal. The optimized Pt1-FeOX/G cathode exhibited an SDZ conversion of >90% within 30 min over a broad pH range (3-11). The Pt1-FeOX/G cathode under a strong alkaline medium exhibited very prominent selectivity to H2O2 via 2e- oxygen reduction reaction with a maximum H2O2 concentration of 211.93 mg L-1. The hydroxyl radicals in the cathodic chamber were mainly derived from the in situ conversion of generated H2O2 in the heterogeneous EF system. The structure-activity results of Pt-FeOX/G suggested that the SDZ removal efficiency was closely related to the decentralized morphology and electronic configuration of the Pt-FeOX microcrystalline structure. Three possible SDZ degradation pathways, dominated by S-N bond cleavage, were proposed based on the stage products. The toxicity of the major products was determined using the ecological structure-activity relationship model in conjunction with trophic aquatic organisms. This study demonstrated the feasibility of enhancing heterogeneous EF catalysis for antibiotic-polluted water using multifunctional single-atom alloy cathodes.

Proactive Effect of Algae-Based Graphene Support on the Oxygen Evolution Reaction Electrocatalytic Activity of NiFe

The preparation of graphene materials from biomass resources is still a challenge, even more so if they are going to be employed as supports for electrocatalysts for water splitting. Herein, we describe the preparation and characterization of graphene oxides (GOs) from solid macroalgae waste obtained after processing an agar-agar residue. The structural and morphological characterization of the obtained GO confirm the presence of a lamellar material that is composed of few layers with an increased number of heteroatoms (including nitrogen) if compared with those observed in a GO obtained from graphite (reference). Three-dimensional electrodes were prepared from these GOs by depositing them onto a fibrous carbon paper, followed by electrodeposition of the catalyst, NiFe. The electrocatalytic performance of these hybrid systems for the oxygen evolution reaction (OER) showed a proactive effect of both graphene materials toward catalysis. Moreover, the electrode prepared from the algae-based graphene showed the highest electrocatalytic activity. This fact could be explained by the different structure of the algae-based graphene which, due to differences in the nucleation growth patterns and electroactive sites developed during the electrodeposition process, produced more reactive NiFe species (higher oxidation state).

Boosting Oxygen Reduction Reaction Kinetics by Designing Rich Vacancy Coupling Pentagons in the Defective Carbon

In the energy conversion context, the design and synthesis of high-performance metal-free carbon nanomaterials with topological defects for the oxygen reduction reaction (ORR) are essential. Herein, we first report a template-assisted strategy to fabricate carbon defect electrocatalysts with rich vacancy coupling pentagons (VP) as active sites in two-dimensional (2D) carbon nanosheets (VP/CNs). Experimental characterizations verify the presence of abundant VP active sites in the VP/CNs electrocatalyst, and the ORR activity is linearly related to the amounts of VP active sites. In situ spectroscopic results identify that the VP/CNs can catalyze direct O-O bond cleavage, bypassing the formation of traditional *OOH intermediates, resulting in the fast kinetics of ORR via a dissociative pathway. The as-prepared VP/CNs show outstanding intrinsic activity for alkaline ORR (half-wave potential of 0.86 V vs reversible hydrogen electrode) with an almost 99% efficiency for four-electron selectivity, outperforming that using the benchmark of Pt/C. Density functional theory calculations further reveal that the cooperative effect between carbon vacancy and adjacent pentagons significantly increases the charge transfer and achieves a lower ORR reaction energy barrier compared with the counterpart of adjacent pentagons or single pentagon. The well-designed carbon defects pave a new avenue for the rational design of metal-free electrocatalysts with high efficiency.

Fullerene Fragment Restructuring: How Spatial Proximity Shapes Defect-Rich Carbon Electrocatalysts

Fullerene transformation emerges as a powerful route to construct defect-rich carbon electrocatalysts, but the carbon bond breakage and reformation that determine the defect states remain poorly understood. Here, we explicitly reveal that the spatial proximity of disintegrated fullerene imposes a crucial impact on the bond reformation and electrocatalytic properties. A counterintuitive hard-template strategy is adopted to enable the space-tuned fullerene restructuring by calcining impregnated C60 not only before but also after the removal of rigid silica spheres (∼300 nm). When confined in the SiO2 nanovoids, the adjacent C60 fragments form sp3 bonding with adverse electron transfer and active site exposure. In contrast, the unrestricted fragments without SiO2 confinement reconnect at the edges to form sp2-hybridized nanosheets while retaining high-density intrinsic defects. The optimized catalyst exhibits robust alkaline oxygen reduction performance with a half-wave potential of 0.82 V via the 4e- pathway. Copper poisoning affirms the intrinsic defects as the authentic active sites. Density functional theory calculations further substantiate that pentagons in the basal plane lead to localized structural distortion and thus exhibit significantly reduced energy barriers for the first O2 dissociation step. Such space-regulated fullerene restructuring is also verified by heating C60 crystals confined in gallium liquid and a quartz tube.