Strategy To Form Eutectic Molecular Liquids Based on Noncovalent Interactions

Porous acid-base hybrid polymers for enhanced NH3 uptake with assistance from cooperative hydrogen bonds

Carboxylic acid-modified materials are a common means of achieving efficient NH3 adsorption. In this study, we report that improved NH3 adsorption capacity and easier desorption can be achieved through the introduction of substances containing Lewis basic groups into carboxylic acid-modified materials. Easily synthesized mesoporous acid-base hybrid polymers were constructed with polymers rich in carboxylic acid and Lewis base moieties through cooperative hydrogen bonding interactions (CHBs). The hybrid polymer PAA-P4VP presented higher NH3 capacity (18.2 mmol g-1 at 298 K and 1 bar NH3 pressure) than PAA (6.0 mmol g-1) through the acid-base reaction and the assistance from CHBs with NH3, while the NH3 desorption from PAA-P4VP was easier for the reformation of CHBs. Based on the introduction of CHBs, a series of mesoporous acid-base hybrid polymers was synthesized with NH3 adsorption capacity of 15.8-19.3 mmol g-1 and high selectivity of NH3 over CO2 (SNH3/CO2 = 25.4-56.3) and N2 (SNH3/N2 = 254-1068), and the possible co-existing gases, such as SO2, had a lower effect on NH3 uptake by hybrid polymers. Overall, the hybrid polymers present efficient NH3 adsorption owing to the abundant acidic moieties and CHBs, while the concomitant Lewis bases promote NH3 desorption.

The Most Potent Natural Pharmaceuticals, Cosmetics, and Food Ingredients Isolated from Plants with Deep Eutectic Solvents

There is growing interest in reducing the number of synthetic products or additives and replacing them with natural ones. The pharmaceutical, cosmetic, and food industries are especially focused on natural and bioactive chemicals isolated from plants or microorganisms. The main challenge here is to develop efficient and ecological methods for their isolation. According to the strategies and rules of sustainable development and green chemistry, green solvents and environmentally friendly technologies must be used. The application of deep eutectic solvents as efficient and biodegradable solvents seems to be a promising alternative to traditional methods. They are classified as being green and ecological but, most importantly, very efficient extraction media compared to organic solvents. The aim of this review is to present the recent findings on green extraction, as well as the biological activities and the possible applications of natural plant ingredients, namely, phenolics, flavonoids, terpenes, saponins, and some others. This paper thoroughly reviews modern, ecological, and efficient extraction methods with the use of deep eutectic solvents (DESs). The newest findings, as well as the factors influencing the efficiency of extraction, such as water content, and hydrogen bond donor and acceptor types, as well as the extraction systems, are also discussed. New solutions to the major problem of separating DESs from the extract and for solvent recycling are also presented.

Yet another perspective on hole interactions, part II: lp-hole vs. lp-hole interactions

Most of the experimental and theoretical work in hole interactions (HIs) is mainly focused on exploiting the nature and characteristics of σ and π-holes. In this perspective, we focus our attention on understanding the origin and properties of lone-pair holes. These holes are present on an atom opposite to its lone-pair region. Utilizing some new and old examples, such as X₃N/P⋯F^- (X = F/Cl/Br/I), F-Cl/Br/I⋯H₃P⋯NCH and H₃B-NBr₃ along with other molecular systems, we explored to what extent these lp-holes participate in lp-hole interactions, if they participate at all.

An emerging deep eutectic solvent based on halogen-bond

A new deep eutectic solvents (DES) driven by halogen-bond was exploited. A family of eutectic mixtures in liquid state were obtained by combination of quaternary ammonium salts and dihalogens. The...

Robust superbase-based emerging solvents for highly efficient dissolution of cellulose

The development of robust solvent systems for cellulose dissolution is of significant importance for cellulose utilization and transformation. Herein, six kinds of novel superbase-based solvents were designed by a combination of 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) with pyridine N-oxide (PyO) or 2-picoline-N-oxide (PiO) for dissolution of cellulose. It was observed that the prepared superbase-based solvents (denoted as DBN-PyO-x and DBN-PiO-4) could efficiently dissolve cellulose at mild temperatures (<80 °C). The chemical structure of the prepared superbase-based solvents and the molar ratio of the components significantly affected the solubility of cellulose, and DBN-PyO-4 showed the best performance with a cellulose solubility of 14.1 wt% 70 °C. The systematic study revealed that the good performance of the prepared superbase-based solvents on cellulose dissolution resulted from the synergistic effect of their ability to form hydrogen bonds and their polarizability.

Preparation of a novel environmentally friendly hydrophobic deep eutectic solvent ChCl-THY and its application in removal of hexavalent chromium from aqueous solution

A liquid-liquid extraction methodology was developed for the removal of Cr(VI) from contaminated water using a novel green hydrophobic deep eutectic solvent (DES) as an efficient sole extracting agent. The hydrophobic DES was obtained by mixing choline chloride and thymol in 1:4 molar ratio at 70°C for 10 min and was denoted as ChCl-THY(1:4). The ChCl-THY(1:4) works efficiently for removal of high (20 mg/L) and low (500 µg/L) concentration of Cr(VI) from artificially contaminated natural water with >95% extraction efficiency (E%) at optimized reaction conditions (pH 2-6, 40°C). The DES was characterized by ¹ H NMR and FTIR spectroscopy, and the data suggest that interaction occurs between Cl^- ion of choline chloride and H atoms of thymol molecules. Physicochemical properties such as density, melting point, moisture, and solubility were studied and discussed. Herein, no sharp melting point was observed for ChCl-THY(1:4) in DSC curve. DES was regenerated using 0.1 M NaOH as stripping agent, and 50%-60% extraction efficiency could be attained in the next cycle. A plausible mechanism of interaction between Cr(VI) species and DES was also explored with the help of FTIR spectroscopy. PRACTITIONER POINTS: A novel hydrophobic DES (ChCl-THY) is prepared by mixing choline chloride and thymol at 1:4 molar ratio. ChCl-THY(1:4) is employed for the first time as sole extracting agent to remove the Cr(VI) from contaminated aqueous solution. >95% extraction efficiency was achieved by ChCl-THY(1:4) in natural water conditions at µg/L and mg/L level of contamination. Both the component used to prepare the DES are naturally abundant; hence, DES is not toxic for biota. The element present in natural water did not show any interference with extraction of Cr(VI).

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

Current Progress in Natural Deep Eutectic Solvents for the Extraction of Active Components from Plants

In the last decade, natural deep eutectic solvents (NADESs) have gained more and more attention due to their green, convenient preparation, low toxicity and biodegradability. It is widely used in various fields, especially in the extraction of active components from plants, formed by the combination of hydrogen bond donors (HBDs) and hydrogen bond acceptors (HBAs) at a certain condition. In this article, six preparation methods of NADESs were summarized and the interactions that occur in the eutectic behavior of NADES including hydrogen bonding, electrostatic interaction and van der Waals force were also reviewed. What is more, its significant extraction capacity on flavonoids, phenols, alkaloids and plant pigments endows its extensive applications in the extraction of active components from medicinal plants. Extraction factors including solvents properties (viscosity, carbon chain length, number of hydroxyl groups), extraction condition (water content, extraction temperature, extraction time, solid-liquid ratio), extraction method and recycling method were discussed. In addition, NADESs can also be combined with other technologies, like molecular imprinting, monolithic column, to achieve efficient and specific extraction of active ingredients. Further systematic studies on the biodegradability and biotoxicity are put forward to be urgent.

Capture of Acidic Gases from Flue Gas by Deep Eutectic Solvents

Up to now, many kinds of deep eutectic solvents (DESs) were investigated for the capture of acidic gases from flue gases. In this review, non-functionalized and functionalized DESs, including binary and ternary DESs, for SO2, CO2 and NO capture, are summarized based on the mechanism of absorption, physical interaction or chemical reaction. New strategies for improving the absorption capacity are introduced in this review. For example, a third component can be introduced to form a ternary DES to suppress the increase in viscosity and improve the CO2 absorption capacity. DESs, synthesized with halogen salt hydrogen bond acceptors (HBAs) and functionalized hydrogen bond donors (HBDs), can be used for the absorption of SO2 and NO with high absorption capacities and low viscosities after absorption, due to physicochemical interaction between gases and DESs. Emphasis is given to introducing the absorption capacities of acidic gases in these DESs, the mechanism of the absorption, and the ways to enhance the absorption capacity.

High volatility of superbase-derived eutectic solvents used for CO2 capture

High volatility would lead to a highly flammable hazard, explosion danger, low regeneration efficiency and air pollution. Eutectic solvents (ESs) are assumed to be nonvolatile; however, the assumption is not correct. Here, we, for the first time, find that superbase-derived ESs are highly volatile. Even at room temperature (i.e., 25 °C) and atmospheric pressure, the mass loss of ESs could reach as high as 43.5% after 20 h of exposure. Superbase-derived ESs are promising solvents for CO2 capture, and they are also highly volatile after CO2 capture. We found that typical ethylene glycol : 1,8-diazabicyclo[5.4.0]undec-7-ene (EG : DBU (4 : 1)) has a three-stage volatilizing mechanism. EG and DBU volatilize first by breaking weak hydrogen-bonding interactions (1st stage), followed by the destruction of strong hydrogen-bonding interactions (2nd stage), and finally by destroying much stronger hydrogen-bonding interactions (3rd stage). This work presents a new horizon that ESs and their mixture with CO2 are highly volatile, which is helpful for mitigating laboratory explosion, combustion hazards, air pollution and designing new types of ESs with negligible volatility.

Vaporization enthalpy, long-term evaporation and evaporation mechanism of polyethylene glycol-based deep eutectic solvents

PEG-based deep eutectic solvents are found to be highly volatile even at room temperature and atmospheric pressure.

Ionicity of deep eutectic solvents by Walden plot and pulsed field gradient nuclear magnetic resonance (PFG-NMR)

The transport properties and ionicity of DESs were investigated by using Walden plot and the pulsed field gradient NMR method.

Recent Developments on 1,3-Dipolar Cycloaddition Reactions by Catalysis in Green Solvents

The use of eco-compatible synthetic procedures in organic reactions and, in particular, in 1,3-dipolar cycloaddition reactions, has recently received a great deal of attention and considerable progress has been achieved in this area in the last years. This review summarizes the approaches currently employed to synthesize heterocyclic compounds by catalyzed 1,3-dipolar cycloadditions in green solvents in the last six years. Our choice to do a selection of the literature from 2014 to 2019 was made considering the absence of a recent review about this period, to our knowledge. Several examples to construct heterocycles by 1,3-dipolar cycloadditions will be discussed in this work subdivided in function of the most important class of non-conventional and green solvents, i.e., ionic liquids (ILs), deep eutectic solvents (DES), and water.

Sustainable wastewater treatment by deep eutectic solvents and natural silk for radioactive iodine capture

The pollution from nuclear leaks and nuclear disasters (e.g. radioactive iodine) would cause serious harm to human beings and ecosystems for many years. Cocoon silk and deep eutectic solvents (DESs) are both green substances. DESs are easily synthesized, cheap, highly biocompatible and highly biodegradable. Here, we combine the removal of organic dyes and the capture of radioactive iodine by using green DES-pretreated cocoon silk. It is the first time organic dyes have been removed from wastewater by DES-disrupted silk for the purpose of favourably removing iodine. Organic dyes-captured DES-pretreated cocoon silk could be used to capture iodine efficiently. It opens a new route to dispose of one waste from nuclear energy with organic dyes from wastewater captured by green solvents-pretreated natural silk.