Tracking Co(I) Intermediate in Operando in Photocatalytic Hydrogen Evolution by X-ray Transient Absorption Spectroscopy and DFT Calculation

Interfacial Charge Transfer Regulates Photoredox Catalysis

Photoredox catalytic processes offer the potential for precise chemical reactions using light and materials. The central determinant is identified as interfacial charge transfer, which simultaneously engenders distinctive behavior in the overall reaction. An in-depth elucidation of the main mechanism and highlighting of the complexity of interfacial charge transfer can occur through both diffusive and direct transfer models, revealing its potential for sophisticated design in complex transformations. The fundamental photophysics uncover these comprehensive applications and offer a clue for future development. This research contributes to the growing body of knowledge on interfacial charge transfer in photoredox catalysis and sets the stage for further exploration of this fascinating area of research.

Promoting Photocatalytic Activity of NH2-MIL-125(Ti) for H2 Evolution Reaction through Creation of TiIII- and CoI-Based Proton Reduction Sites

Titanium-based metal-organic framework, NH2-MIL-125(Ti), has been widely investigated for photocatalytic applications but has low activity in the hydrogen evolution reaction (HER). In this work, we show a one-step low-cost postmodification of NH2-MIL-125(Ti) via impregnation of Co(NO3)2. The resulting Co@NH2-MIL-125(Ti) with embedded single-site CoII species, confirmed by XPS and XAS measurements, shows enhanced activity under visible light exposure. The increased H2 production is likely triggered by the presence of active CoI transient sites detected upon collection of pump-flow-probe XANES spectra. Furthermore, both photocatalysts demonstrated a drastic increase in HER performance after consecutive reuse while maintaining their structural integrity and consistent H2 production. Via thorough characterization, we revealed two mechanisms for the formation of highly active proton reduction sites: nondestructive linker elimination resulting in coordinatively unsaturated Ti sites and restructuring of single CoII sites. Overall, this straightforward manner of confinement of CoII cocatalysts within NH2-MIL-125(Ti) offers a highly stable visible-light-responsive photocatalyst.

Mapping the Ultrafast Mechanistic Pathways of Co Photocatalysts in Pure Water through Time-Resolved X-ray Spectroscopy

Nanosecond time-resolved X-ray (tr-XAS) and optical transient absorption spectroscopy (OTA) are applied to study 3 multimolecular photocatalytic systems with [Ru(bpy)3 ]2+ photoabsorber, ascorbic acid electron donor and Co catalysts with methylene (1), hydroxomethylene (2) and methyl (3) amine substituents in pure water. OTA and tr-XAS of 1 and 2 show that the favored catalytic pathway involves reductive quenching of the excited photosensitizer and electron transfer to the catalyst to form a CoII square pyramidal intermediate with a bonded aqua molecule followed by a CoI square planar derivative that decays within ≈8 μs. By contrast, a CoI square pyramidal intermediate with a longer decay lifetime of ≈35 μs is formed from an analogous CoII geometry for 3 in H2 O. These results highlight the protonation of CoI to form the elusive hydride species to be the rate limiting step and show that the catalytic rate can be enhanced through hydrogen containing pendant amines that act as H-H bond formation proton relays.

Asynchronous x-ray multiprobe data acquisition for x-ray transient absorption spectroscopy

Laser pump X-ray Transient Absorption (XTA) spectroscopy offers unique insights into photochemical and photophysical phenomena. X-ray Multiprobe data acquisition (XMP DAQ) is a technique that acquires XTA spectra at thousands of pump-probe time delays in a single measurement, producing highly self-consistent XTA spectral dynamics. In this work, we report two new XTA data acquisition techniques that leverage the high performance of XMP DAQ in combination with High Repetition Rate (HRR) laser excitation: HRR-XMP and Asynchronous X-ray Multiprobe (AXMP). HRR-XMP uses a laser repetition rate up to 200 times higher than previous implementations of XMP DAQ and proportionally increases the data collection efficiency at each time delay. This allows HRR-XMP to acquire more high-quality XTA data in less time. AXMP uses a frequency mismatch between the laser and x-ray pulses to acquire XTA data at a flexibly defined set of pump-probe time delays with a spacing down to a few picoseconds. AXMP introduces a novel pump-probe synchronization concept that acquires data in clusters of time delays. The temporally inhomogeneous distribution of acquired data improves the attainable signal statistics at early times, making the AXMP synchronization concept useful for measuring sub-nanosecond dynamics with photon-starved techniques like XTA. In this paper, we demonstrate HRR-XMP and AXMP by measuring the laser-induced spectral dynamics of dilute aqueous solutions of Fe(CN)₆ ^4- and [Fe^II(bpy)₃]²⁺ (bpy: 2,2'-bipyridine), respectively.

Time-Resolved Spectroscopy and High-Efficiency Light-Driven Hydrogen Evolution of a {Mo3 S4 }-Containing Polyoxometalate-Based System

Polyoxothiometalate ions (ThioPOM) are active hydrogen-evolution reaction (HER) catalysts based on modular assembly built from electrophilic clusters {MoS_x } and vacant polyoxotungstates. Herein, the dumbbell-like anion [{(PW₁₁ O₃₉ )Mo₃ S₄ (H₂ O)₃ (OH)}₂ ]^8- exhibits very high light-driven HER activity, while the active cores {Mo₃ S₄ } do not contain any exposed disulfido ligands, which were suspected to be the origin of the HER activity. Moreover, in the catalyst architecture, the two central {Mo₃ S₄ } cores are sandwiched by two {PW₁₁ O₃₉ }^7- subunits that act as oxidant-resistant protecting groups and behave as electron-collecting units. A detailed photophysical study was carried out confirming the reductive quenching mechanism of the photosensitizer [Ir(ppy)₂ (dtbbpy)]⁺ by the sacrificial donor triethanolamine (TEOA) and highlighting the very high rate constant of the electron transfer from the reduced photosensitizer to the ThioPOM catalyst. Such results provide new insights into the field of molecular catalytic systems able to promote high HER activity.

Mechanistic Insights Into Iron(II) Bis(pyridyl)amine-Bipyridine Skeleton for Selective CO2 Photoreduction

A bis(pyridyl)amine-bipyridine-iron(II) framework (Fe(BPAbipy)) of complexes 1-3 is reported to shed light on the multistep nature of CO₂ reduction. Herein, photocatalytic conversion of CO₂ to CO even at low CO₂ concentration (1 %), together with detailed mechanistic study and DFT calculations, reveal that 1 first undergoes two sequential one-electron transfer affording an intermediate with electron density on both Fe and ligand for CO₂ binding over proton. The following 2 H⁺ -assisted Fe-CO formation is rate-determining for selective CO₂ -to-CO reduction. A pendant, proton-shuttling α-OH group (2) initiates PCET for predominant H₂ evolution, while an α-OMe group (3) cancels the selectivity control for either CO or H₂ . The near-unity selectivity of 1 and 2 enables self-sorting syngas production at flexible CO/H₂ ratios. The unprecedented results from one kind of molecular catalyst skeleton encourage insight into the beauty of advanced multi-electron and multi-proton transfer processes for robust CO₂ RR by photocatalysis.

Structural and Electronic Influences on Rates of Tertpyridine-Amine CoIII -H Formation During Catalytic H2 Evolution in an Aqueous Environment

In this work, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co^II -Cl]⁺ species results in the formation of [Co^II (κ⁴ -L)(OH₂ )]²⁺ . Further reduction produces [Co^I (κ⁴ -L)(OH₂ )]⁺ , which undergoes a rate-limiting structural rearrangement to [Co^I (κ⁵ -L)]⁺ before being protonated to form [Co^III -H]²⁺ . The rate of [Co^III -H]²⁺ formation is similar for all complexes in the series. Using E_1/2 values of various Co species and pK_a values of [Co^III -H]²⁺ estimated from PR experiments, we found that while the protonation of [Co^III -H]²⁺ is unfavorable, [Co^II -H]⁺ reacts with protons to produce H₂ . The catalytic activity for H₂ evolution tracks the hydricity of the [Co^II -H]⁺ intermediate.

Polypyridyl Co complex-based water reduction catalysts: why replace a pyridine group with isoquinoline rather than quinoline?

The electronic effect of the substituent has been fully leveraged to improve the activity of molecular water reduction catalysts (WRCs). However, the steric effect of the substituents has received less attention. In this work, a steric hindrance effect was observed in a quinoline-involved polypyridyl Co complex-based water reduction catalyst (WRC), which impedes the formation of Co(iii)-H from Co(i), two pivotal intermediates for H₂ evolution, leading to significantly impaired electrocatalytic and photocatalytic activity with respect to its parent complex, [Co(TPA)Cl]Cl (TPA = tris(2-pyridinylmethyl)-amine). In sharp contrast, two isoquinoline-involved polypyridyl Co complexes exhibited significantly improved H₂ evolution efficiencies compared to [Co(TPA)Cl]Cl, benefitting mainly from the more basic and conjugated features of isoquinoline over pyridine. The dramatically different influences caused by the replacement of a pyridine group in the TPA ligand by quinoline and isoquinoline fully demonstrates the important roles of both the electronic and steric effects of a substituent. Our results may provide novel insights for designing more efficient WRCs.

Electronic effects on polypyridyl Co complex-based water reduction catalysts

Three new isomeric cobalt complexes of TPA (tris(2-pyridylmethyl)amine) based on methoxy substitution at the ortho, meta and para positions, respectively, were constructed and their photocatalytic proton reduction efficiencies were compared. It was found that there are good linear correlations with the Hammett constants of the substituents for the computed Co–N bond lengths, redox potentials of Co^II/I and Co^I/0 events, and the photocatalytic activities of the complexes. The ortho-substituted Co complex distinguished itself from the others remarkably in all these comparisons, demonstrating the presence of a steric effect besides the electronic effect. For other examined complexes, a stronger electron-donating substituent may lead to a higher hydrogen evolution efficiency, suggesting that the formation of a Co(iii) hydride intermediate is the rate-limiting step.

Three isomeric Co complexes showed a significant substituent electronic effect in photocatalytic hydrogen production.

Characterizing photocatalysts for water splitting: from atoms to bulk and from slow to ultrafast processes

This review provides a comprehensive overview on characterisation techniques for light-driven redox-catalysts highlighting spectroscopic, microscopic, electrochemical and spectroelectrochemical approaches.

Tailored self-assembled photocatalytic nanofibres for visible-light-driven hydrogen production

The creation of efficient artificial systems that mimic natural photosynthesis represents a key current challenge. Here, we describe a high-performance recyclable photocatalytic core-shell nanofibre system that integrates a cobalt catalyst and a photosensitizer in close proximity for hydrogen production from water using visible light. The composition, microstructure and dimensions-and thereby the catalytic activity-of the nanofibres were controlled through living crystallization-driven self-assembly. In this seeded growth strategy, block copolymers with crystallizable core-forming blocks and functional coronal segments were coassembled into low-dispersity, one-dimensional architectures. Under optimized conditions, the nanofibres promote the photocatalytic production of hydrogen from water with an overall quantum yield for solar energy conversion to hydrogen gas of ~4.0% (with a turnover number of >7,000 over 5 h, a frequency of >1,400 h^-1 and a H₂ production rate of >0.327 μmol h^-1 with 1.34 μg of catalytic polymer (that is, >244,300 μmol h^-1 g^-1 of catalytic polymer)).

Identifying a Real Catalyst of [NiFe]-Hydrogenase Mimic for Exceptional H2 Photogeneration

Inspired by the natural [NiFe]-H₂ ase, we designed mimic 1, (dppe)Ni(μ-pdt)(μ-Cl)Ru(CO)₂ Cl to realize effective H₂ evolution under photocatalytic conditions. However, a new species 2 was captured in the course of photo-, electro-, and chemo- one-electron reduction. Experimental studies of in situ IR spectroscopy, EPR, NMR, X-ray absorption spectroscopy, and DFT calculations corroborated a dimeric structure of 2 as a closed-shell, symmetric structure with a Ru^I center. The isolated dimer 2 showed the real catalytic role in photocatalysis with a benchmark turnover frequency (TOF) of 1936 h^-1 for H₂ evolution, while mimic 1 worked as a pre-catalyst and evolved H₂ only after being reduced to 2. The remarkably catalytic activity and unique dimer structure of 2 operated in photocatalysis unveiled a broad research prospect in hydrogenases mimics for advanced H₂ evolution.

Qualitative Approaches Towards Useful Photocatalytic Materials

The long-standing crusade searching for efficient photocatalytic materials has resulted in a vast landscape of promising photocatalysts, as reflected by the number of reviews reported in the last decade. Virtually all of these reviews have focused on quantitative approaches aiming at developing an understanding of the underlying mechanisms behind photocatalytic behavior and the parameters that influence structure–function correlation. Less attention has been paid, however, to qualitative measures around the development and assessment of photocatalysts. These measures will contribute toward narrowing the range of potential photocatalytic materials for widespread applications. The current report provides a critical perspective over some of the main factors affecting the assessment of photocatalytic materials as a code of good practice. A case of study is also provided, where this qualitative analysis is applied to one of the most prolific materials of the last-decade, disorder-engineered, black titanium dioxide (TiO₂).

Enhanced Hydrogen Evolution in Neutral Water Catalyzed by a Cobalt Complex with a Softer Polypyridyl Ligand

To explore the structure-function relationships of cobalt complexes in the catalytic hydrogen evolution reaction (HER), we studied the substitution of a tertiary amine with a softer pyridine group and the inclusion of a conjugated bpy unit in a Co complex with a new pentadentate ligand, 6-[6-(1,1-di-pyridin-2-yl-ethyl)-pyridin-2-ylmethyl]-[2,2']bipyridinyl (Py3Me-Bpy). These modifications resulted in significantly improved stability and activity in both electro- and photocatalytic HER in neutral water. [Co(Py3Me-Bpy)(OH₂ )](PF₆ )₂ catalyzes the electrolytic HER at -1.3 V (vs. SHE) for 20 hours with a turnover number (TON) of 266 300, and photolytic HER for two days with a TON of 15 000 in pH 7 aqueous solutions. The softer ligand scaffold possibly provides increased stability towards the intermediate Co^I species. DFT calculations demonstrate that HER occurs through a general electron transfer/proton transfer/electron transfer/proton transfer pathway, with H₂ released from the protonation of Co^II -H species.

Tracking Mechanistic Pathway of Photocatalytic CO2 Reaction at Ni Sites Using Operando, Time-Resolved Spectroscopy

Harvesting solar energy for catalytic conversion of CO₂ into valuable chemical fuels/feedstocks is an attractive yet challenging strategy to realize a sustainable carbon-cycle utilization. Homogeneous catalysts typically exhibit higher activity and selectivity as compared with heterogeneous counterparts, benefiting from their atomically dispersed catalytic sites and versatile coordination structures. However, it is still a "black box" how the coordination and electronic structures of catalysts dynamically evolve during the reaction, forming the bottleneck for understanding their reaction pathways. Herein, we demonstrate to track the mechanistic pathway of photocatalytic CO₂ reduction using a terpyridine nickel(II) complex as a catalyst model. Integrated with a typical homogeneous photosensitizer, the catalytic system offers a high selectivity of 99% for CO₂-to-CO conversion with turnover number and turnover frequency as high as 2.36 × 10⁷ and 385.6 s^-1, respectively. We employ operando and time-resolved X-ray absorption spectroscopy, in combination with other in situ spectroscopic techniques and theoretical computations, to track the intermediate species of Ni catalyst in the photocatalytic CO₂ reduction reaction for the first time. Taken together with the charge dynamics resolved by optical transient absorption spectroscopy, the investigation elucidates the full mechanistic reaction pathway including some key factors that have been often overlooked. This work opens the "black box" for CO₂ reduction in the system of homogeneous catalysts and provides key information for developing efficient catalysts toward artificial photosynthesis.

Semiconductor nanocrystals for small molecule activation via artificial photosynthesis

The protocol of artificial photosynthesis using semiconductor nanocrystals shines light on green, facile and low-cost small molecule activation to produce solar fuels and value-added chemicals.

Two-dimensional-related catalytic materials for solar-driven conversion of COx into valuable chemical feedstocks

The discovery of improved chemical processes for CO and CO2 hydrogenation to valuable hydrocarbon fuels and alcohols is of paramount importance for the chemical industry. Such technologies have the potential to reduce anthropogenic CO2 emissions by adding value to a waste stream, whilst also reducing our consumption of fossil fuels. Current thermal catalytic technologies available for CO and CO2 hydrogenation are demanding in terms of energy input. Various alternative technologies are now being developed for COx hydrogenation, with solar-driven processes over two-dimensional (2D) and 2D-related composite materials being particularly attractive due to the abundance of solar energy on Earth and also the high selectivity of defect-engineered 2D materials towards specific valuable products under very mild reaction conditions. This review showcases recent advances in the solar-driven COx reduction to hydrocarbons over 2D-based materials. Optimization of 2D catalyst performance demands interdisciplinary research that embraces catalyst electronic structure manipulation and morphology control, surface/interface engineering, reactor engineering and density functional theory modelling studies. Through improved understanding of the structure-performance relationships in 2D-related catalysts which is achievable through the application of modern in situ characterization techniques, practical photo/photothermal/photoelectrochemical technologies for CO and CO2 reduction to high-valuable products such as olefins could be realized in the not-too-distant future.

Photocatalytic Activation of Less Reactive Bonds and Their Functionalization via Hydrogen-Evolution Cross-Couplings

Cross-coupling reactions have been established as potential tools for manufacture of complex molecular frameworks of diversified interests by connecting two simple molecules through the formation of a carbon-carbon (C-C) or a carbon-heteroatom (C-X) bond. Conventional cross-couplings are transition metal-catalyzed reactions between electrophiles and nucleophiles. Generally, the electrophilic partner is an aryl or alkenyl halide, the nucleophile is an organometallic reagent, and both are obtained from prefunctionalization of their corresponding hydrocarbons. During the past decade, transition metal-catalyzed dehydrogenative cross-couplings between two carbon-hydrogen (C-H) bonds and between one C-H bond and one heteroatom-hydrogen (X-H) bond, which build a C-C and a C-X linkage respectively, have emerged as an attractive strategy in synthetic chemistry. Such straightforward couplings allow use of less functionalized reagents, thus reducing the number of steps to the target molecule and minimizing waste production. However, such reactions involve the use of stoichiometric amounts of sacrificial oxidants such as peroxides, high-valent metals, and iodine(III) oxidants. This leads to low atom economy and possible generation of toxic wastes. Recently, visible light photocatalytic dehydrogenative cross-coupling reactions have received much attention due to their potential in utilizing sunlight as a source of energy making the process appealing. In this approach, metal complexes, organic dyes, or semiconductor quantum dots that absorb visible light are employed as photocatalysts. Upon irradiation, photocatalyst initiates single electron transfer with substrate(s) to generate a radical cation or radical anion of the substrate, which undergoes the desired reaction of interest. In this case, molecular oxygen is utilized as the oxidant with the formation of hydrogen peroxide as the only byproduct. These aspects make the process much greener than the corresponding transition metal-catalyzed dehydrogenative cross-coupling reactions. Research efforts from our group have led to the development of an environmentally benign strategy to construct a C-C bond from two different C-H bonds and to construct a C-X bond from one C-H bond and one X-H bond by visible light photocatalysis. Our approach, photocatalytic hydrogen-evolution cross-coupling reactions, combines a photocatalyst with a proton reduction cocatalyst to create a dual catalyst system. The former catalyst uses light energy as the driving force for the cross-coupling, while the latter catalyst may capture electrons from the substrates or reaction intermediates to reduce the protons eliminated from the reactive scaffolds (C-H/C-H or C-H/X-H bonds) into molecular hydrogen (H₂). Thus, without use of any sacrificial oxidant and under mild conditions, our dual catalyst system affords cross-coupling products with excellent yields with generation of an equimolar amount of H₂ as the sole byproduct. The photocatalytic hydrogen-evolution cross-coupling is highly step and atom economical and particularly useful for reactions that involve species sensitive to oxidative conditions. This Account highlights the findings from our laboratories on photocatalytic hydrogen-evolution cross-coupling reactions featuring activation and functionalization of C(sp³)-H bonds adjacent to amino groups and to oxygen atoms in ethers, aromatic C(sp²)-H bonds, and several types of X-H bonds. We expect that this strategy for combining photocatalytic activation of C-H and X-H bonds with proton reduction holds significant potential for development of atom economical and environmentally benign transformations.

Structure of the CoI Intermediate of a Cobalt Pentapyridyl Catalyst for Hydrogen Evolution Revealed by Time-Resolved X-ray Spectroscopy

Cobalt polypyridyls are highly efficient water-stable molecular catalysts for hydrogen evolution. The catalytic mechanism explaining their activity is under debate and the main question is the nature of the involvement of pyridyls in the proton transfer: the pentapyridyl ligand, acting as a pentadentate ligand, can provide stability to the catalyst or one of the pyridines can be involved in the proton transfer. Time-resolved Co K-edge X-ray absorption spectroscopy in the microsecond time range indicates that, for the [Co^II (aPPy)] catalyst (aPPy=di([2,2'-bipyridin]-6-yl)(pyridin-2-yl)methanol), the pendant pyridine dissociates from the cobalt in the intermediate Co^I state. This opens the possibility for pyridinium to act as an intramolecular proton donor. In the resting state, the catalyst returns to the original six-coordinate high-spin Co^II state with a pentapyridyl and one water molecule coordinating to the metal center. Such a bifunctional role of the polypyridyl ligands can be exploited during further optimization of the catalyst.

Shedding Light on the Nature of Photoinduced States Formed in a Hydrogen-Generating Supramolecular RuPt Photocatalyst by Ultrafast Spectroscopy

Photoinduced electronic and structural changes of a hydrogen-generating supramolecular RuPt photocatalyst are studied by a combination of time-resolved photoluminescence, optical transient absorption, and X-ray absorption spectroscopy. This work uses the element specificity of X-ray techniques to focus on the interplay between the photophysical and -chemical processes and the associated time scales at the catalytic Pt moiety. We observe very fast (<30 ps) photoreduction of the Pt catalytic site, followed by an ∼600 ps step into a strongly oxidized Pt center. The latter process is likely induced by oxidative addition of reactive iodine species. The oxidized Pt species is long-lived and fully recovers to the original ground state complex on a >10 μs time scale. However, the photosensitizing Ru moiety is fully restored on a much shorter ∼300 ns time scale. This reaction scheme implies that we may withdraw two electrons from a catalyst that is activated by a single photon.

Nonstoichiometric Cux Iny S Quantum Dots for Efficient Photocatalytic Hydrogen Evolution

Unlike their bulk counterpart, Cu_x In_y S quantum dots (QDs) prepared by an aqueous synthetic approach, show promising activity for photocatalytic hydrogen evolution, which is competitive with the state-of-the-art Cd chalcogen QDs. Moreover, the as-prepared Cu_x In_y S QDs with In-rich composition show much better efficiency than the stoichiometric ones (Cu/In=1:1).