Heterostructured Copper-Ceria and Iron-Ceria Nanorods: Role of Morphology, Redox, and Acid Properties in Catalytic Diesel Soot Combustion

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

Unveiling the Surface Chemical Reactions during Multi-Phase Catalytic Oxidation of Soot on Nanoengineering/Interfacing/Doping-Prepared Mn-CeO2 Catalysts Using TG-MS and Operando DRIFTS-MS

The aerosol pyrolysis method from nitrate precursors was used to prepare the Mn-CeO2 catalyst containing Mn2O3, CeO2, and Mn-doped CeO2 nanoparticles for catalyzing carbonous soot oxidation. The prepared Mn-CeO2 catalysts have high specific surface areas, Ce3+ ratio, and oxygen vacancy defects; these are a benefit for soot oxidation. The T50 for soot oxidation on the 0.57Mn-CeO2 catalyst is as low as 355 °C, which is 329 °C lower than that for soot oxidation without a catalyst. The catalysts were characterized using XRD, SEM-EDS, HRTEM, XPS, Raman spectroscopy, H2-TPR-MS, O2-TPD-MS, soot-TPR-MS, and operando DRIFTS-MS. The functions of Mn2O3, CeO2, and Mn-doped CeO2 in the 0.57Mn-CeO2 catalyst are unveiled. Mn-doped CeO2 plays a key role and CeO2 participates in soot oxidation, while Mn2O3 is used to enhance higher ratios of Ce3+, via the reaction of Mn3+ + Ce4+ = Mn4+ + Ce3+. The mechanism of soot oxidation on Mn-CeO2 was proposed.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Structure engineering of CeO2 for boosting the Au/CeO2 nanocatalyst in the green and selective hydrogenation of nitrobenzene

Exploring eco-friendly and cost-effective strategies for structure engineering at the nanoscale is important for boosting heterogeneous catalysis but still under a long-standing challenge. Herein, multifunctional polyphenol tannic acid, a low-cost natural biomass containing catechol and galloyl species, was employed as a green reducing agent, chelating agent, and stabilizer to prepare Au nanoparticles, which were dispersed on different-shaped CeO₂ supports (e.g., rod, flower, cube, and octahedral). Systematic characterizations revealed that Au/CeO₂-rod had the highest oxygen vacancy density and Ce(III) proportion, favoring the dispersion and stabilization of the metal active sites. Using isopropanol as a hydrogen-transfer reagent, deep insights into the structure-activity relationship of the Au/CeO₂ catalysts with various morphologies of CeO₂ in the catalytic nitrobenzene transfer hydrogenation reaction were gained. Notably, the catalytic performance followed the order: Au/CeO₂-rod (110), (100), (111) > Au/CeO₂-flower (100), (111) > Au/CeO₂-cube (100) > Au/CeO₂-octa (111). Au/CeO₂-rod displayed the highest conversion of 100% nitrobenzene and excellent stability under optimal conditions. Moreover, DFT calculations indicated that nitrobenzene molecules had a suitable adsorption energy and better isopropanol dehydrogenation capacity on the Au/CeO₂ (110) surface. A reaction pathway and the synergistic catalytic mechanism for catalytic nitrobenzene transfer hydrogenation are proposed based on the results. This work demonstrates that CeO₂ structure engineering is an efficient strategy for fabricating advanced and environmentally benign materials for nitrobenzene hydrogenation.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Copper–Cerium–Tin Oxide Catalysts for Preferential Oxidation of CO in Hydrogen: Effects of Synthesis Method and Copper Content

Copper was incorporated into the Ce-Sn and comparative Ce-Zr oxide supports by one-pot precipitation in the presence of CTAB template and by the impregnation of templated Ce-Sn and Ce-Zr oxides. The synthesized Cu-Ce-Sn and Cu-Ce-Zr catalysts were tested in the continuous-flow preferential oxidation of CO in hydrogen excess. The one-pot synthesized tin- and zirconium-doped catalysts demonstrated better CO conversion and CO2 selectivity than their impregnated counterparts. For the tin-modified ternary system that showed the best catalytic performance, the copper content was further optimized. The structure, reducibility, surface chemical state and textural properties of the catalysts were analyzed by SEM-EDX, XRD, H2-TPR, Raman spectroscopy, XPS and TEM. The nonmonotonic changes in the specific surface area, Cu+/Cu2+ ratio and ratio of lattice and non-lattice oxygen with increasing the Cu content are discussed in terms of copper distribution in the catalysts. The influence of the interaction between copper oxide species and the cerium–tin/cerium–zirconium oxide support on the performance of the ternary catalysts was thoroughly analyzed and discussed.

The Synthesis of Protein-Encapsulated Ceria Nanorods for Visible-Light Driven Hydrogen Production and Carbon Dioxide Reduction

1D rare earth-based nanomaterials have attracted significant attention due to their excellent photo/electro-catalytic performance. The corresponding challenge is how to synthesize shape and size-controlled nanostructures in an easy scale-up way. Herein, the authors present a facile one-step strategy to design 1D multifunctional protein-encapsulated cerium oxide nanorods (PCNRs) by utilizing bovine serum albumin as an efficient biotemplate. Remarkably, the PCNRs exhibit high chemical and interfacial adhesion stability with intriguing properties, resulting in an exceptionally high activity towards H₂ evolution and CO₂ reduction. The photocatalytic activity of PCNRs to produce H₂ is about 10 times higher than conventional CeO₂ nanorods. The incorporation of rhodamine B into the PCNRs brings unprecedentedly high photocatalytic H₂ evolution rate being 123 times higher than that of conventional CeO₂ nanorods. Further the presence of the -NH₂ groups on the PCNRs facilitated the adsorption and activation of CO₂ and efficiently suppressed the proton reduction, and as a result, the PCNRs photocatalyst is highly active in converting CO₂ to CO and CH₄ , with the evolution rates being 50 and 83 times higher than those of conventional CeO₂ nanorods, respectively. Achieving such efficient photocatalyst is a critical step toward practical production of high-value renewable fuels using solar energy.

In Situ Generation of the Surface Oxygen Vacancies in a Copper-Ceria Catalyst for the Water-Gas Shift Reaction

The dissociation of H₂O is a crucial aspect for the water-gas shift reaction, which often occurs on the vacancies of a reducible oxide support. However, the vacancies sometimes run off, thus inhibiting H₂O dissociation. After high-temperature treatment, the ceria supports were lacking vacancies because of sintering. Unexpectedly, the in situ generation of surface oxygen vacancies was observed, ensuring the efficient dissociation of H₂O. Due to the surface reconstruction of ceria nanorods, the copper species sustained were highly dispersed on the sintered support, on which CO was adsorbed efficiently to react with hydroxyls from H₂O dissociation. In contrast, no surface reconstruction occurred in ceria nanoparticles, leading to the sintering of copper species. The sintered copper species were averse to adsorb CO, so the copper-ceria nanoparticle catalyst had poor reactivity even when surface oxygen vacancies could be generated in situ.

How the Morphology of NiOx-Decorated CeO2 Nanostructures Affects Catalytic Properties in CO2 Methanation

Effects of morphology and exposed crystal planes of NiO_x-decorated CeO₂ (NiCeO₂) nanostructured catalysts on activity during CO₂ methanation were examined, using nanorod (NR), nanocube (NC), and nanooctahedron (NO) structures. The NiCeO₂ nanorods (NiCeO₂-NR) showed superior activity to NiCeO₂-NC and NiCeO₂-NO along with excellent selectivity for CH₄. This material also demonstrated exceptional durability, with no significant loss of catalytic activity or structural change after use. Comprehensive physicochemical characterization as well as density functional theory calculations determined that the high performance of the NiCeO₂-NR was closely related to the large quantity of surface oxygen vacancies and the high degree of reversibility associated with the Ce⁴⁺ ↔ Ce³⁺ redox cycle of the support. These effects originate from the enhanced reactivity of oxygen atoms on the (110) surfaces of the oxide compared with the (100) and (111) surfaces. This information is expected to assist in the rational design of practical catalysts for the activation of CO₂ molecules and other important transformations.

Facet-Dependent Reactivity of Ceria Nanoparticles Exemplified by CeO2-Based Transition Metal Catalysts: A Critical Review

The rational design and fabrication of highly-active and cost-efficient catalytic materials constitutes the main research pillar in catalysis field. In this context, the fine-tuning of size and shape at the nanometer scale can exert an intense impact not only on the inherent reactivity of catalyst’s counterparts but also on their interfacial interactions; it can also opening up new horizons for the development of highly active and robust materials. The present critical review, focusing mainly on our recent advances on the topic, aims to highlight the pivotal role of shape engineering in catalysis, exemplified by noble metal-free, CeO2-based transition metal catalysts (TMs/CeO2). The underlying mechanism of facet-dependent reactivity is initially discussed. The main implications of ceria nanoparticles’ shape engineering (rods, cubes, and polyhedra) in catalysis are next discussed, on the ground of some of the most pertinent heterogeneous reactions, such as CO2 hydrogenation, CO oxidation, and N2O decomposition. It is clearly revealed that shape functionalization can remarkably affect the intrinsic features and in turn the reactivity of ceria nanoparticles. More importantly, by combining ceria nanoparticles (CeO2 NPs) of specific architecture with various transition metals (e.g., Cu, Fe, Co, and Ni) remarkably active multifunctional composites can be obtained due mainly to the synergistic metalceria interactions. From the practical point of view, novel catalyst formulations with similar or even superior reactivity to that of noble metals can be obtained by co-adjusting the shape and composition of mixed oxides, such as Cu/ceria nanorods for CO oxidation and Ni/ceria nanorods for CO2 hydrogenation. The conclusions derived could provide the design principles of earth-abundant metal oxide catalysts for various real-life environmental and energy applications.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Surface oxygen species essential for the catalytic activity of Ce–M–Sn (M = Mn or Fe) in soot oxidation

Herein, transition metal (Mn and Fe)-doped Ce–Sn nanorod catalysts were successfully synthesized via a hydrothermal method.

Nickel and cobalt transfigured natural clay: a green catalyst for low-temperature catalytic soot oxidation

Modified 'natural clay' with Ni and Co nanoparticles explored as efficient catalyst for low-temperature soot oxidation activity studies.

Elucidating the Role of Oxide-Oxide/Carbon Interfaces of CuOx-CeO2/C in Boosting Electrocatalytic Performance

Herein, we report the synthesis and bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities of a CuO_x-CeO₂/C electrocatalyst (EC) with rich oxide-oxide and oxide-carbon interfaces. It not only demonstrates a smaller Tafel slope (65 mV dec^-1) and higher limiting current density (-5.03 mA cm^-2) but also exhibits an onset potential (-0.10 V vs Ag/AgCl) comparable to that of benchmark Pt/C. Besides undergoing the favorable direct four-electron ORR pathway, it unveils a loss of 23% of its initial current after 6 h of a stability test and a negative shift of 4 mV in the half-wave potential after the accelerated durability test compared to the corresponding current loss of 28% and negative shift of 20 mV for Pt/C. It also reveals remarkable OER activity in an alkaline medium with a low onset potential (0.20 V) and a smaller Tafel slope (177 mV dec^-1). The bifunctional ORR/OER activity of CuO_x-CeO₂/C EC can be ascribed to the synergistic effects, its unique structure with enriched oxygen vacancies owing to the presence of Ce⁴⁺/Ce³⁺, robust oxide-oxide and oxide-carbon heterointerfaces, and homogeneous dispersion of oxides over the carbon bed, which facilitates faster electronic conduction.

Boosting the Removal of Diesel Soot Particles by the Optimal Exposed Crystal Facet of CeO2 in Au/CeO2 Catalysts

Optimized surface facet of the catalysts is an efficient strategy to boost catalytic purification of diesel soot as important components of atmospheric fine particles. Herein, we have elaborately constructed the nanocatalysts of Au nanoparticles supported on the well-defined CeO₂ (rod, cube, and polyhedron) with predominantly exposed facets of {110}, {100}, and {111}, respectively. The strong interaction between Au and CeO₂ with the optimal crystal facet is crucial to adjust the active site density for activated O₂, and the synergy effect of Au and the CeO₂{110} facet possesses the largest density of active sites compared with other crystal facets of {100} and {111}. The catalytic activity for soot combustion was tuned by exposed crystal facets of CeO₂. The Au/CeO₂-rod catalyst exhibits the highest catalytic activity (T₅₀ = 350 °C, TOF = 0.18 h^-1) and the lowest apparent activation energy (72 kJ mol^-1) during soot combustion. Based on the results of in situ Raman spectra, the formation and stability of oxygen vacancy located at the interface of the Au-O-Ce bond, boosting the key step of NO oxidation to NO₂, are dependent on the exposed crystal facets of CeO₂. It highlights a new strategy for the fabrication of high-efficient CeO₂-based catalysts for the removal of soot particles or other pollution.

Recent Advances on the Rational Design of Non-Precious Metal Oxide Catalysts Exemplified by CuOx/CeO2 Binary System: Implications of Size, Shape and Electronic Effects on Intrinsic Reactivity and Metal-Support Interactions

Catalysis is an indispensable part of our society, massively involved in numerous energy and environmental applications. Although, noble metals (NMs)-based catalysts are routinely employed in catalysis, their limited resources and high cost hinder the widespread practical application. In this regard, the development of NMs-free metal oxides (MOs) with improved catalytic activity, selectivity and durability is currently one of the main research pillars in the area of heterogeneous catalysis. The present review, involving our recent efforts in the field, aims to provide the latest advances—mainly in the last 10 years—on the rational design of MOs, i.e., the general optimization framework followed to fine-tune non-precious metal oxide sites and their surrounding environment by means of appropriate synthetic and promotional/modification routes, exemplified by CuOx/CeO2 binary system. The fine-tuning of size, shape and electronic/chemical state (e.g., through advanced synthetic routes, special pretreatment protocols, alkali promotion, chemical/structural modification by reduced graphene oxide (rGO)) can exert a profound influence not only to the reactivity of metal sites in its own right, but also to metal-support interfacial activity, offering highly active and stable materials for real-life energy and environmental applications. The main implications of size-, shape- and electronic/chemical-adjustment on the catalytic performance of CuOx/CeO2 binary system during some of the most relevant applications in heterogeneous catalysis, such as CO oxidation, N2O decomposition, preferential oxidation of CO (CO-PROX), water gas shift reaction (WGSR), and CO2 hydrogenation to value-added products, are thoroughly discussed. It is clearly revealed that the rational design and tailoring of NMs-free metal oxides can lead to extremely active composites, with comparable or even superior reactivity than that of NMs-based catalysts. The obtained conclusions could provide rationales and design principles towards the development of cost-effective, highly active NMs-free MOs, paving also the way for the decrease of noble metals content in NMs-based catalysts.

CoOx-decorated CeO2 heterostructures: effects of morphology on their catalytic properties in diesel soot combustion

The effect of the morphology, which exposes different crystal planes, on the physicochemical properties and catalytic activity in diesel carbon soot oxidation was studied using CoOx-decorated CeO2 (CoCeO2) heterostructured catalysts, such as nanorods (NRs), nanocubes (NCs), and nanoparticles (NPs). The CoOx/CeO2 nanorods (CoCeO2-NR) showed superior carbon soot combustion activity at lower temperatures to CoCeO2-NCs and CoCeO2-NPs under both tight and loose contact modes with soot combustion temperatures (T50) of 321 and 494 °C, respectively. A comprehensive analysis by means of X-ray diffraction, Raman spectroscopy, high-angle annular dark-field scanning transmission electron microscopy, in situ X-ray absorption fine structure, temperature-programmed reduction, oxygen storage/release measurements, and density functional theory calculations revealed that the improved activity of CoCeO2-NRs is mainly ascribed to the high oxygen release rate and strong redox capability of the supported Co species, with complete reversibility. This originates from the high reactivity of oxygen atoms on (110) surfaces, compared to (100) and (111) surfaces over CeO2. Additionally, CoCeO2-NRs displayed durability and recyclability without any significant loss of catalytic activity or structural change. These insights will aid in the rational design of practical catalysts for the purification of diesel exhaust and other important transformations.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr_0.19Rh_0.06CeO_z) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O₂ at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr_0.19Rh_0.06CeO_z: dispersed Rh^3+δ species (<1 nm) and Cr^6-γO_3-x nanoparticles (∼1 nm) supported on CeO₂ in Cr_0.19Rh_0.06CeO_z were transformed to Rh nanoclusters, Cr(OH)₃ species and CeO_2-x with two Ce³⁺-oxide layers at the surface in a concerted activation manner of the three metal species with H₂.

Facet-Dependent Reactivity of Fe2O3/CeO2 Nanocomposites: Effect of Ceria Morphology on CO Oxidation

Ceria has been widely studied either as catalyst itself or support of various active phases in many catalytic reactions, due to its unique redox and surface properties in conjunction to its lower cost, compared to noble metal-based catalytic systems. The rational design of catalytic materials, through appropriate tailoring of the particles’ shape and size, in order to acquire highly efficient nanocatalysts, is of major significance. Iron is considered to be one of the cheapest transition metals while its interaction with ceria support and their shape-dependent catalytic activity has not been fully investigated. In this work, we report on ceria nanostructures morphological effects (cubes, polyhedra, rods) on the textural, structural, surface, redox properties and, consequently, on the CO oxidation performance of the iron-ceria mixed oxides (Fe2O3/CeO2). A full characterization study involving N2 adsorption at –196 °C, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS) was performed. The results clearly revealed the key role of support morphology on the physicochemical properties and the catalytic behavior of the iron-ceria binary system, with the rod-shaped sample exhibiting the highest catalytic performance, both in terms of conversion and specific activity, due to its improved reducibility and oxygen mobility, along with its abundance in Fe2+ species.

Combustion Synthesis of Non-Precious CuO-CeO₂ Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

In this study, xCuO-CeO₂ mixed oxide catalysts (Cu weight ratio x = 1.5, 3, 4.5, 6 and 15 wt.%) were prepared using solution combustion synthesis (SCS) and their catalytic activities towards the methane (CH₄) oxidation reaction were studied. The combustion synthesis of the pure CeO₂ and the CuO-CeO₂ solid solution catalysts was performed using copper and/or cerium nitrate salt as an oxidizer and citric acid as a fuel. A variety of standard techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to reveal the microstructural, crystal, thermal and electronic properties that may affect the performance of CH₄ oxidation. The CuO subphase was detected in the prepared solid solution and confirmed with XRD and Raman spectroscopy, as indicated by the XRD peaks at diffraction angles of 35.3° and 38.5° and the Ag Raman mode at 289 cm-1, which are characteristics of tenorite CuO. A profound influence of Cu content was evident, not only affecting the structural and electronic properties of the catalysts, but also the performance of catalysts in the CH₄ oxidation. The presence of Cu in the CeO₂ lattice obviously promoted its catalytic activity for CH₄ catalytic oxidation. Among the prepared catalysts, the 6% CuO-CeO₂ catalyst demonstrated the highest performance, with T50 = 502 °C and T80 = 556 °C, an activity that is associated with the availability of a fine porous structure and the enhanced surface area of this catalyst. The results demonstrate that nanocrystalline copper-ceria mixed oxide catalysts could serve as an inexpensive and active material for CH₄ combustion.

Advances in porous and nanoscale catalysts for viable biomass conversion

Solid catalysts with unique porosity and nanoscale properties play a promising role for efficient valorization of biomass into sustainable advanced fuels and chemicals.

Catalytic performance of a Bi2O3–Fe2O3 system in soot combustion

The transport ability of oxygen ions of Bi₂O₃ on the Bi₂O₃/Fe₂O₃ catalyst promotes soot combustion.