Rapid Formation of Metal-Organic Frameworks (MOFs) Based Nanocomposites in Microdroplets and Their Applications for CO2 Photoreduction

Challenging thermodynamics: combining immiscible elements in a single-phase nano-ceramic

The Hume-Rothery rules governing solid-state miscibility limit the compositional space for new inorganic material discovery. Here, we report a non-equilibrium, one-step, and scalable flame synthesis method to overcome thermodynamic limits and incorporate immiscible elements into single phase ceramic nanoshells. Starting from prototype examples including (NiMg)O, (NiAl)Ox, and (NiZr)Ox, we then extend this method to a broad range of Ni-containing ceramic solid solutions, and finally to general binary combinations of elements. Furthermore, we report an "encapsulated exsolution" phenomenon observed upon reducing the metastable porous (Ni0.07Al0.93)Ox to create ultra-stable Ni nanoparticles embedded within the walls of porous Al2O3 nanoshells. This nanoconfined structure demonstrated high sintering resistance during 640 h of catalysis of CO2 reforming of methane, maintaining constant 96% CH4 and CO2 conversion at 800 °C and dramatically outperforming conventional catalysts. Our findings could greatly expand opportunities to develop novel inorganic energy, structural, and functional materials.

Investigation of Tryptic Protein Digestion in Microdroplets and in Bulk Solution

Recent studies have shown that ultrafast enzymatic digestion of proteins can be achieved in microdroplet within 250 μs. Further investigation of peptides resulting from microdroplet digestion (MD) would be necessary to evaluate it as an alternative to the conventional bulk digestion for bottom-up and biotherapeutic protein characterization. Herein we examined and compared protein tryptic digestion in both MD and bulk solution. In the case of MD of β-lactoglobulin B, the preservation of long peptides was observed due to the short digestion time. In addition, MD is applicable to digest both high- and low-abundance proteins in mixture. In the case of digesting NIST 8671 mAb antibody containing a low level of commonly encountered host cell protein (HCP) PLBL2 (mAb:PLBL2 = 100:1 by weight), MD produced lower levels of digestion-induced chemical modifications of asparagine/glutamine deamidation, compared with overnight digestion. No significant difference between MD and bulk digestion was observed in terms of trypsin digestion specificity based on examination of semi- and unspecific-cleaved peptides. Our study suggests that MD, a fast digestion approach, could be adopted for bottom-up proteomics research and for peptide mapping of mAbs to characterize site-specific deamidation and glycosylation, for the purpose of development of biopharmaceuticals.

State-of-the-Art Advancements in Photocatalytic Hydrogenation: Reaction Mechanism and Recent Progress in Metal-Organic Framework (MOF)-Based Catalysts

Photocatalytic hydrogenation provides an effective alternative way for the synthesis of industrial chemicals to meet the economic and environment expectations. Especially, over the past few years, metal-organic frameworks (MOFs), featured with tunable structure, porosity, and crystallinity, have been significantly developed as many high-performance catalysts in the field of photocatalysis. In this review, the background and development of photocatalytic hydrogenation are systemically summarized. In particular, the comparison between photocatalysis and thermal catalysis, and the fundamental understanding of photohydrogenation, including reaction pathways, reducing species, regulation of selectivity, and critical parameters of light, are proposed. Moreover, this review highlights the advantages of MOFs-based photocatalysts in the area of photohydrogenation. Typical effective strategies for modifying MOFs-based composites to produce their advantages are concluded. The recent progress in the application of various types of MOFs-based photocatalysts for photohydrogenation of unsaturated organic chemicals and carbon dioxide (CO2 ) is summarized and discussed in detail. Finally, a brief conclusion and personal perspective on current challenges and future developments of photocatalytic hydrogenation processes and MOFs-based photocatalysts are also highlighted.

Application of Porous Materials for CO2 Reutilization: A Review

CO2 reutilization processes contribute to the mitigation of CO2 as a potent greenhouse gas (GHG) through reusing and converting it into economically valuable chemical products including methanol, dimethyl ether, and methane. Solar thermochemical conversion and photochemical and electrochemical CO2 reduction processes are emerging technologies in which solar energy is utilized to provide the energy required for the endothermic dissociation of CO2. Owing to the surface-dependent nature of these technologies, their performance is significantly reliant on the solid reactant/catalyst accessible surface area. Solid porous structures either entirely made from the catalyst or used as a support for coating the catalyst/solid reactants can increase the number of active reaction sites and, thus, the kinetics of CO2 reutilization reactions. This paper reviews the principles and application of porous materials for CO2 reutilization pathways in solar thermochemical, photochemical, and electrochemical reduction technologies. Then, the state of the development of each technology is critically reviewed and evaluated with the focus on the use of porous materials. Finally, the research needs and challenges are presented to further advance the implementation of porous materials in the CO2 reutilization processes and the commercialization of the aforementioned technologies.

ZIF-12/Fe-Cu LDH Composite as a High Performance Electrocatalyst for Water Oxidation

Layered double hydroxides (LDH) are being used as electrocatalysts for oxygen evolution reactions (OERs). However, low current densities limit their practical applications. Herein, we report a facile and economic synthesis of an iron-copper based LDH integrated with a cobalt-based metal-organic framework (ZIF-12) to form LDH-ZIF-12 composite (1) through a co-precipitation method. The as-synthesized composite 1 requires a low overpotential of 337 mV to achieve a catalytic current density of 10 mA cm-2 with a Tafel slope of 89 mV dec-1. Tafel analysis further demonstrates that 1 exhibits a slope of 89 mV dec-1 which is much lower than the slope of 284 mV dec-1 for LDH and 172 mV dec-1 for ZIF-12. The slope value of 1 is also lower than previously reported electrocatalysts, including Ni-Co LDH (113 mV dec-1) and Zn-Co LDH nanosheets (101 mV dec-1), under similar conditions. Controlled potential electrolysis and stability test experiments show the potential application of 1 as a heterogeneous electrocatalyst for water oxidation.

Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials and have attracted researchers due to their unique chemical and physical properties-design flexibility, tuneable pore channels, a high surface-to-volume ratio that allow their distinct application in diverse research fields-gas storage, gas separation, catalysis, adsorption, drug delivery, ion exchange, sensing, etc. The rapidly growing CO₂ in the atmosphere is a global concern due to the excessive use of fossil fuels in the current era. CO₂ is the prime cause of global warming and should be ameliorated either through adsorption or conversion into value-added products to protect the environment and mankind. Nowadays, MOFs are exploited as a photocatalyst for applications of CO₂ reduction. Since the use of semiconductors limits the use of visible light for photocatalytic reduction of CO₂, MOFs are promising options. The current review describes recent development in the application of MOFs as host, composites, and their derivatives in photocatalytic reduction of CO₂ to CO and different organic chemicals (HCOOH, CH₃OH, CH₄). Efficient charge separation and visible light absorption by incorporation of active sites for efficient photocatalysis have been discussed. The selection of material for high CO₂ uptake and potential strategies for the rational design and development of high-performance catalysts are outlined. Major challenges and future perspectives have also been discussed at the last of the review.

Self-assembly of TiO2/ZIF-8 nanocomposites for varied photocatalytic CO2 reduction with H2O vapor induced by different synthetic methods

Photoreduction of carbon dioxide (CO₂) provides an effective perspective for solving the energy crisis and environmental problems. Herein, two types of composite photocatalysts (TiO₂/ZIF-8) based on ZIF-8 and TiO₂ have been designed and synthesized with the help of the grinding method and the solid-synthesis method. Both composite photocatalysts are employed for the photocatalytic reduction of CO₂. In composite photocatalysts prepared by the grinding method, ZIF-8 particles are distributed on the surface of TiO₂, and provide extra available spaces for storing CO₂, which is beneficial for improving their photoreduction performances. As a result, an enhanced CO formation rate of 21.74 μmol g^-1 h^-1 with a high selectivity of 99% is obtained for this family of composite photocatalysts via the solid-gas mode without photosensitizers and sacrificial agents. For comparison, the other family of composite photocatalysts synthesized via the solid-synthesis method possesses structures similar to ZIF-8, where TiO₂ is encapsulated inside the framework of ZIF-8. This structural feature obstructs the contact between the active sites of TiO₂ and CO₂, and leads to lower activities. The best CO formation rate of this family is only 10.67 μmol g^-1 h^-1 with 90% selectivity. Both the structural features of the two families of photocatalysts are described to explain their differences in photoreduction performances. The experimental finding reveals that different synthetic approaches indeed result in diversified structures and varied photocatalytic performances. This work affords a new scalable and efficient approach for the rational design of efficient photocatalysts in the area of artificial photosynthesis.

A review of the research status of CO2 photocatalytic conversion technology based on bibliometrics

In order to clarify the research status, hot spots and development trend in the field of conversion of carbon dioxide, a large amount of literature data set in the scientific network database was analyzed by bibliometrics.

Varied proton conductivity and photoreduction CO2 performance of isostructural heterometallic cluster based metal–organic frameworks

A family of isostructural heterometallic MOFs based on Fe2M clusters serve as potential proton conductors and photocatalysts for CO2 photoreduction.

Integrated nano-architectured photocatalysts for photochemical CO2 reduction

Recent advances in nanotechnology, especially the development of integrated nanostructured materials, have offered unprecedented opportunities for photocatalytic CO2 reduction. Compared to bulk semiconductor photocatalysts, most of these nanostructured photocatalysts offer at least one advantage in areas such as photogenerated carrier kinetics, light absorption, and active surface area, supporting improved photochemical reaction efficiencies. In this review, we briefly cover the cutting-edge research activities in the area of integrated nanostructured catalysts for photochemical CO2 reduction, including aqueous and gas-phase reactions. Primarily explored are the basic principles of tailor-made nanostructured composite photocatalysts and how nanostructuring influences photochemical performance. Specifically, we summarize the recent developments related to integrated nanostructured materials for photocatalytic CO2 reduction, mainly in the following five categories: carbon-based nano-architectures, metal-organic frameworks, covalent-organic frameworks, conjugated porous polymers, and layered double hydroxide-based inorganic hybrids. Besides the technical aspects of nanostructure-enhanced catalytic performance in photochemical CO2 reduction, some future research trends and promising strategies are addressed.

Synthesis of Copper(II) Trimesinate Coordination Polymer and Its Use as a Sorbent for Organic Dyes and a Precursor for Nanostructured Material

Several important synthesis pathways for metal-organic frameworks (MOFs) were applied to determine how the synthesis methods and conditions affect the structure and adsorption capacity of the resulting samples. In the present work, three different synthesis routes were used to obtain copper trimesinate coordination polymer: Slow evaporation (A), solvothermal synthesis using a polyethylene glycol (PEG-1500) modulator (B), and green synthesis in water (C). This MOF was characterized by elemental analysis, infrared spectrometry, X-ray diffraction, scanning electron microscopy, thermogravimetry and volumetric nitrogen adsorption/desorption. The samples have permanent porosity and a microporous structure with a large surface area corresponding to the adsorption type I. The obtained MOF was tested as a sorbent to remove organic dyes methylene blue (МВ), Congo red (CR) and methyl violet (MV) as examples. Dye adsorption followed pseudo-first-order kinetics. The equilibrium data were fitted to the Langmuir and Freundlich isotherm models, and the isotherm constants were determined. Thermodynamic parameters, such as changes in the free energy of adsorption (ΔG0), enthalpy (ΔH0), and entropy (ΔS0), were calculated. Thermolysis of copper trimesinate leads to the formation of carbon materials Cu@C with a high purity.

A Metal-Free Donor-Acceptor Covalent Organic Framework Photocatalyst for Visible-Light-Driven Reduction of CO2 with H2 O

Visible-light-driven CO₂ reduction to valuable chemicals without sacrificial agents and cocatalysts remains challenging, especially for metal-free photocatalytic systems. Herein, a novel donor-acceptor (D-A) covalent organic framework (CT-COF) was constructed by the Schiff-base reaction of carbazole-triazine based D-A monomers and possessed a suitable energy band structure, strong visible-light-harvesting, and abundant nitrogen sites. CT-COF as a metal-free photocatalyst could reduce CO₂ with gaseous H₂ O to CO as the main carbonaceous product with approximately stoichiometric O₂ evolution under visible-light irradiation and without cocatalyst. The CO evolution rate (102.7 μmol g^-1  h^-1 ) was 68.5 times that of g-C₃ N₄ under the same conditions. In situ Fourier-transform (FT)IR analysis indicated that CT-COF could adsorb and activate the CO₂ and H₂ O molecules and that COOH* species may be a key intermediate. DFT calculations suggested that nitrogen atoms in the triazine rings may be photocatalytically active sites.

Formation of CX Bonds in CO2 Chemical Fixation Catalyzed by Metal-Organic Frameworks

Transformation of CO₂ based on metal-organic framework (MOF) catalysts is becoming a hot research topic, not only because it will help to reduce greenhouse gas emission, but also because it will allow for the production of valuable chemicals. In addition, a large number of impressive products have been synthesized by utilizing CO₂ . In fact, it is the formation of new covalent bonds between CO₂ and substrate molecules that successfully result in CO₂ solidly inserting into the products, and only four types of new CX bonds, including CH, CC, CN, and CO bonds, are observed in this exploration. An overview of recent progress in constructing CX bonds for CO₂ conversion catalyzed by various MOF catalysts is provided. The catalytic mechanism of generating different CX bonds is further discussed according to both structural features of MOFs and the interactions among CO₂ , substrates, as well as MOFs. The future opportunities and challenges in this field are also tentatively covered.

Recent Advances in MOF-based Nanocatalysts for Photo-Promoted CO2 Reduction Applications

The conversion of CO2 to valuable substances (methane, methanol, formic acid, etc.) by photocatalytic reduction has important significance for both the sustainable energy supply and clean environment technologies. This review systematically summarized recent progress in this field and pointed out the current challenges of photocatalytic CO2 reduction while using metal-organic frameworks (MOFs)-based materials. Firstly, we described the unique advantages of MOFs based materials for photocatalytic reduction of CO2 and its capacity to solve the existing problems. Subsequently, the latest research progress in photocatalytic CO2 reduction has been documented in detail. The catalytic reaction process, conversion efficiency, as well as the product selectivity of photocatalytic CO2 reduction while using MOFs based materials are thoroughly discussed. Specifically, in this review paper, we provide the catalytic mechanism of CO2 reduction with the aid of electronic structure investigations. Finally, the future development trend and prospect of photocatalytic CO2 reduction are anticipated.

Mechanistic Insight into Photocatalytic Pathways of MIL-100(Fe)/TiO2 Composites

The integration of metal-organic frameworks (MOFs) with semiconductors has attracted mounting attention for photocatalytic applications. However, more efforts are needed to unravel the interface structure in MOF/semiconductor composites and its role in charge transfer. Herein, a MIL-100(Fe)/TiO₂ composite was synthesized as a prototypical photocatalyst and studied systematically to explore the interface structure and unravel the charge transfer pathways during the photocatalytic processes. The composite was fabricated by growing MIL-100(Fe) crystals on TiO₂ using surface-coated FeOOH as the precursor. The as-prepared MIL-100(Fe)/TiO₂ exhibited significantly improved photocatalytic performance over pristine TiO₂, which was mainly because of the enhanced charge separation as confirmed by transient absorption spectroscopy analysis. This enhancement partially arose from the special chemical structure at the interface, where the Fe-O-Ti bond was formed. As verified by the density functional theory calculation, this distinct structure would create defect energy levels adjacent to the valence band maximum of TiO₂. During the photocatalytic processes, the defect energy levels serve as sinks to capture excited charge carriers and retard the recombination, which subsequently leads to the increased charge density and promoted photocatalytic efficiency. Meanwhile, the intimate interactions between MIL-100(Fe) and TiO₂ would also help to improve the charge separation by transferring photo-induced holes through the ligands to Fe-O clusters. These findings would advance the fundamental understanding of the interface structure and the charge transfer pathways in MOF/semiconductor composite photocatalysts.

Black Phosphorus, a Rising Star 2D Nanomaterial in the Post-Graphene Era: Synthesis, Properties, Modifications, and Photocatalysis Applications

Semiconductor photocatalysis, a sustainable and renewable technology, is deemed to be a new path to resolve environmental pollution and energy shortage. The development of effective photocatalysts, especially the metal-free photocatalysts, is a critical determinant of this technique. The recently emerged 2D material of black phosphorus with distinctive properties of tunable direct bandgap, ultrahigh charge mobility, fortified optical absorption, large specific surface area, and anisotropic structure has captured enormous attention since the first exfoliation of bulk black phosphorus into mono- or few layered phosphorene in 2014. In this article, the state-of-the-art preparation methods are first summarized for bulk black phosphorus, phosphorene, and black phosphorus quantum dot and then the fundamental structure and electronic and optical properties are analyzed to evaluate its feasibility as a metal-free photocatalyst. Various modifications on black phosphorus are also summarized to enhance its photocatalytic performance. Furthermore, the multifarious applications such as solar to energy conversion, organic removal, disinfection, nitrogen fixation, and photodynamic therapy are discussed and some of the future challenges and opportunities for black phosphorus research are proposed. This review reveals that the rising star of black phosphorus will be a multifunctional material in the postgraphene era.

A novel nitrogen heterocyclic ligand-based MOF: synthesis, characterization and photocatalytic properties

The synthesis of novel coordination polymers that are highly efficient, stable and reusable photocatalysts for the degradation of MB dye.

Carbon capture and conversion using metal–organic frameworks and MOF-based materials

This review summarizes recent advances and highlights the structure–property relationship on metal–organic framework-based materials for carbon dioxide capture and conversion.

Colloid-assisted growth of metal–organic framework nanoparticles

A new colloid-assisted approach is introduced to synthesize metal–organic framework (MOF) nanoparticles.

Pressure-regulated synthesis of Cu(TPA)·(DMF) in microdroplets for selective CO2 adsorption

A pressure-regulated microdroplet-based spray process is developed and investigated for the systematic synthesis of metal–organic frameworks.

Step-by-Step Growth of HKUST-1 on Functionalized TiO2 Surface: An Efficient Material for CO2 Capture and Solar Photoreduction

The present study reports on a simple preparation strategy of a hybrid catalyst, TiO2/HKUST-1, containing TiO2 anatase nanoparticles (NPs) with tailored morphology and photocatalytic activity coupled with a porous metal-organic framework (MOF), namely HKUST-1, as an advanced material for the CO2 photocatalytic reduction. In detail, TiO2/HKUST-1 catalyst was prepared via an easy slow-diffusion method combined with a step-by-step self-assembly at room temperature. The growth of crystalline HKUST-1 onto titania surface was achieved by functionalizing TiO2 nanocrystals, with phosphoesanoic acid (PHA), namely TiO2-PHA, which provides an intimate contact between MOF and TiO2. The presence of a crystalline and porous shell of HKUST-1 on the TiO2 surfaces was assessed by a combination of analytical and spectroscopic techniques. TiO2/HKUST-1 nanocomposite showed a significant efficiency in reducing CO2 to CH4 under solar light irradiation, much higher than those of the single components. The role of MOF to improve the photoreduction process under visible light was evidenced and attributed either to the relevant amount of CO2 captured into the HKUST-1 porous architecture or to the hybrid structure of the material, which affords enhanced visible light absorption and allows an effective electron injection from TiO2-PHA to HKUST-1, responsible for the photochemical reduction of CO2.

Metal-Organic-Framework-Based Catalysts for Photoreduction of CO2

Photoreduction of CO₂ into reusable carbon forms is considered as a promising approach to address the crisis of energy from fossil fuels and reduce excessive CO₂ emission. Recently, metal-organic frameworks (MOFs) have attracted much attention as CO₂ photoreduction-related catalysts, owing to their unique electronic band structures, excellent CO₂ adsorption capacities, and tailorable light-absorption abilities. Recent advances on the design, synthesis, and CO₂ reduction applications of MOF-based photocatalysts are discussed here, beginning with the introduction of the characteristics of high-efficiency photocatalysts and structural advantages of MOFs. The roles of MOFs in CO₂ photoreduction systems as photocatalysts, photocatalytic hosts, and cocatalysts are analyzed. Detailed discussions focus on two constituents of pure MOFs (metal clusters such as Ti-O, Zr-O, and Fe-O clusters and functional organic linkers such as amino-modified, photosensitizer-functionalized, and electron-rich conjugated linkers) and three types of MOF-based composites (metal-MOF, semiconductor-MOF, and photosensitizer-MOF composites). The constituents, CO₂ adsorption capacities, absorption edges, and photocatalytic activities of these photocatalysts are highlighted to provide fundamental guidance to rational design of efficient MOF-based photocatalyst materials for CO₂ reduction. A perspective of future research directions, critical challenges to be met, and potential solutions in this research field concludes the discussion.

Highly-oriented one-dimensional MOF-semiconductor nanoarrays for efficient photodegradation of antibiotics

Highly-oriented one-dimensional MOF-semiconductor nanoarrays were developed for the efficient photodegradation of antibiotics.

A mechanistic approach towards the photocatalytic organic transformations over functionalised metal organic frameworks: a review

This review focuses on the possible mechanisms involved in the organic transformations occurring through photocatalysis over functionalised metal–organic frameworks.

Metal–organic frameworks (MOFs) for photocatalytic CO2 reduction

This review summarized the recent progress, limitations and challenges in using MOFs for photocatalytic CO₂ reduction, a green and sustainable strategy for CO₂ utilization.