Nanocomposite of CuInS/ZnS and Nitrogen-Doped Graphene Quantum Dots for Cholesterol Sensing

Transient N-GQDs/PVA nanocomposite thin film for memristor application

In recent years quantum dot (QDs) based resistive switching devices(memristors) have gained a lot of attention. Here we report the resistive switching behavior of nitrogen-doped graphene quantum dots/Polyvinyl alcohol (N-GQDs/PVA) degradable nanocomposite thin film with different weight percentages (wt.%) of N-GQDs. The memristor device was fabricated by a simple spin coating technique. It was found that 1 wt% N-GQDs/PVA device shows a prominent resistive switching phenomenon with good cyclic stability, high on/off ratio of ~102and retention time of ∼104s. From a detailed experimental study of band structure, we conclude that memristive behavior originates from the space charge controlled conduction (SCLC) mechanism. Further transient property of built memristive device was studied. Within three minutes of being submerged in distilled water, the fabricated memory device was destroyed. This phenomenon facilitates the usage of fabricated memristor devices to develop memory devices for military and security purposes.

Unveiling the multifaceted applications of magnetically responsive chitosan capped ZnS QDs for sensing and annihilation of pharmaceutical drugs

The persistence of active pharmaceutical ingredients in water bodies has lead to detrimental impacts on public health as well as deteriorated aquatic resources at breakneck pace. To address this, highly fluorescent chitosan capped ZnS QDs (CZS QDs) were integrated with nickel ferrite nanoparticles (NF NPs) through ultrasonic assisted method to yield a series of magnetically responsive CZS-xNF nanohybrids (x = 5, 10, 15 and 20 wt% of NF). The successful fabrication of nanohybrids were affirmed through various techniques such as Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), high resolution transmission electron microscopy (HRTEM), vibrating sample magnetometer (VSM) and diffused reflectance spectroscopy (DRS). The dual applicability of CZS-xNF nanohybrid was witnessed for the detection of pharmaceutical waste by fluorescence sensing and their concomitant annihilation via visible light driven photodegradation reactions. The developed nanohybrid showed exceptional selectivity towards tetracycline antibiotics, with ultra-low limit of detection of 0.53 μM for tetracycline (TC) and 0.30 μM for minocycline (MC), respectively. The fluorescent sensor was also analysed for trace level detection of tetracyclines in real water samples that showed satisfactory recoveries of 90-106%, depicting practical applicability of sensor. Additionally, the excellent photocatalytic features of synthesized nanohybrid prompted their use in photodegradation of TC and MC and a superior photocatalytic performance was achieved in comparison to CZS QDs. The enhanced photocatalytic performance of CZS-xNF nanohybrid can be attributed to type-I charge transfer mechanism, which resulted in efficient charge separation and reduced photo-induced recombination rate of charge carriers. The nanohybrids were recyclable up to four cycles after being utilized in sensing and photocatalysis, thus offering a promising strategy for environmental remediation through synchronized sensing and extirpation of pharmaceutical waste.

Probing interaction of atherogenic lysophosphatidylcholine with functionalized graphene nanosheets: theoretical modelling and experimental validation

CONTEXT

The potential of graphene derivatives for theranostic applications depends on their compatibility with cellular and biomolecular components. Lysophosphatidylcholine (LPC), a lipid component present in oxidized low-density lipoproteins, microvesicles and free circulation in blood, plays a critical role in the pathophysiology of various diseases. Using density functional theory-based methods, we systematically investigated the interaction of atherogenic LPC molecule with different derivatives of graphene, including pristine graphene, graphene with defect, N-doped graphene, amine-functionalized graphene, various graphene oxides and hydroxylated graphene oxides. We observed that the adsorption of LPC on graphene derivatives is highly selective based on the orientation of the functional groups of LPC interacting with the surface of the derivatives. Hydroxylated graphene oxide exhibited the strongest interaction with LPC with adsorption energy of - 2.1 eV due to the interaction between the hydroxyl group on graphene and the phosphate group of LPC. The presence of aqueous medium further enhanced this interaction indicating favourable adsorption of LPC and graphene oxide in biological systems. Such strong interaction leads to substantial change in the electronic structure of the LPC molecule, which results in the activation of this molecule. In contrast, amine-modified graphene showed the least interaction. These theoretical results are in line with our experimental fluorescence spectroscopic data of LPC/1-anilino-8-napthalene sulfonic acid complex. Our present comprehensive investigation employing both theoretical and experimental methods provides a deeper understanding of graphene-lipid interaction, which holds paramount importance in the design and fabrication of graphene-based nanomaterials for biomedical applications.

METHODS

In this study, we employed the density functional theory-based methods to investigate the electronic and structural properties of graphene derivatives and LPC molecule using the Quantum Espresso package. The exchange-correlation functional was described within generalized gradient approximation (GGA) as parameterized by Perdew, Burke and Ernzerhof (PBE). The valence electrons were represented using plane wave basis sets. `The Grimme's dispersion method was used to include the van der Waals dispersion correction.

A Review on Multiple I-III-VI Quantum Dots: Preparation and Enhanced Luminescence Properties

I-III-VI type QDs have unique optoelectronic properties such as low toxicity, tunable bandgaps, large Stokes shifts and a long photoluminescence lifetime, and their emission range can be continuously tuned in the visible to near-infrared light region by changing their chemical composition. Moreover, they can avoid the use of heavy metal elements such as Cd, Hg and Pb and highly toxic anions, i.e., Se, Te, P and As. These advantages make them promising candidates to replace traditional binary QDs in applications such as light-emitting diodes, solar cells, photodetectors, bioimaging fields, etc. Compared with binary QDs, multiple QDs contain many different types of metal ions. Therefore, the problem of different reaction rates between the metal ions arises, causing more defects inside the crystal and poor fluorescence properties of QDs, which can be effectively improved by doping metal ions (Zn²⁺, Mn²⁺ and Cu⁺) or surface coating. In this review, the luminous mechanism of I-III-VI type QDs based on their structure and composition is introduced. Meanwhile, we focus on the various synthesis methods and improvement strategies like metal ion doping and surface coating from recent years. The primary applications in the field of optoelectronics are also summarized. Finally, a perspective on the challenges and future perspectives of I-III-VI type QDs is proposed as well.

Capped ZnO quantum dots with a tunable photoluminescence for acetone detection

Acetone is a dangerous material that poses a major risk to human health. To protect against its harmful impacts, a fluorescent biosensor 3-aminopropyl triethoxysilane capped ZnO quantum dots (APTES/ZnO QDs) was investigated to detect low concentrations of acetone. Numerous techniques, including Fourier transform infrared (FTIR), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), zeta potential, UV-vis absorption, and photoluminescence (PL), are used to thoroughly verify the successful synthesis of pristine ZnO QDs and APTES/ZnO QDs. The HRTEM micrograph showed that the average size distributions of ZnO QDs and APTES/ZnO QDs were spherical forms of 2.6 and 1.2 nm, respectively. This fluorescent probe dramatically increased its sensitivity toward acetone with a wide linear response range of 0.1-18 mM and a correlation coefficient (R²) of 0.9987. The detection limit of this sensing system for acetone is as low as 42 μM. The superior selectivity of acetone across numerous interfering bioanalytics is confirmed. Reproducibility and repeatability experiments presented relative standard deviations (RSD) of 2.2% and 2.4%, respectively. Finally, this developed sensor was applied successfully for detecting acetone in a diabetic patient's urine samples with a recovery percentage ranging from 97 to 102.7%.

Glutathione-Capped ZnS Quantum Dots-Urease Conjugate as a Highly Sensitive Urea Probe

Abstract

Quantum dots (QDs) possess characteristic chemical and optical features. In this light, ZnS QDs capped with glutathione (GSH) were synthesized via an easy aqueous co-precipitation technique. Fabricated QDs were characterized in terms of X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), Fourier transform infrared (FTIR) and Zeta potential analyses. Optical properties were examined using photoluminescence (PL) and ultraviolet–visible (UV–visible) spectroscopies. Moreover, GSH-capped ZnS QDs were evaluated as an optical probe for non-enzymatic detection of urea depending on the quenching of PL intensity of ZnS QDs in the presence of urea from concentration range of 0.5–5 mM with a correlation coefficient (R2) of 0.995, sensitivity of 0.0875 mM−1 and LOD of 0.426 mM. Furthermore, GSH-capped ZnS QDs-urease conjugate was utilized as an optical probe for enzymatic detection of urea in the range from 1.0 µM to 5.0 mM. Interestingly, it was observed that urea has a good affinity towards ZnS QDs-urease conjugate with a linear relationship between the change of PL intensity and urea concentration. It was found that R2 is 0.997 with a sensitivity of 0.042 mM−1 for mM concentration (0.5–5 mM) and LOD of 0.401 mM. In case of µM concentration range (1–100 µM), R2 was 0.971 with a sensitivity of 0.0024 µM−1 and LOD of 0.687 µM. These data suggest that enzyme conjugation to capped QDs might improve their sensitivity and applicability.

Graphical Abstract

Garlic capped silver nanoparticles for rapid detection of cholesterol

A fluorescent biosensor based on garlic (Allium sativum L.) capped Ag nanoparticles (G-Ag NPs) has been synthesized for cholesterol detection. Pristine Ag NPs and G-Ag NPs were synthesized through the chemical reduction process. The effect of different capping agents such as 3-aminopropyltriethoxysilane (APTS), glutathione, 8-hydroxyquinoline, garlic/APTS, garlic/glutathione, and garlic/8-hydroxyquinoline on Ag NPs was evaluated. These NPs were characterized using Fourier transform infrared (FTIR), energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), X-Ray diffraction (XRD), UV-visible spectra, and Zeta potential. The HRTEM micrographs illustrated that Ag NPs with particles size ranging from 2.98 to 14.34 nm were aggregated. G-Ag NPs images showed uniformly distributed spherical particles with particles size from 4.52 to 12.8 nm. The reduction in the plasmonic bands of Ag NPs and G-Ag NPs occurred by 96.4% and 11.7%, respectively after 12 months. The developed sensor for cholesterol based on the fluorescence enhancement had a linear response in a concentration range of 0.4-5.17 mM with a sensitivity of 4.36 Mm^-1 and a limit of detection of 0.186 mM. The high selectivity toward cholesterol in presence of different interferes such as glucose, cysteine, glycine, urea, sucrose, nickel, and copper, and their mixture was evaluated. The applicability of this developed sensor for real serum samples was detected with a recovery percentage from 99.1 to 101.3%. Repeatability and reproducibility experiments displayed relative standard deviations (RSD) of 0.88% and 0.62%, respectively.

Innovations in the synthesis of graphene nanostructures for bio and gas sensors

Sensors play a significant role in modern technologies and devices used in industries, hospitals, healthcare, nanotechnology, astronomy, and meteorology. Sensors based upon nanostructured materials have gained special attention due to their high sensitivity, precision accuracy, and feasibility. This review discusses the fabrication of graphene-based biosensors and gas sensors, which have highly efficient performance. Significant developments in the synthesis routes to fabricate graphene-based materials with improved structural and surface properties have boosted their utilization in sensing applications. The higher surface area, better conductivity, tunable structure, and atom-thick morphology of these hybrid materials have made them highly desirable for the fabrication of flexible and stable sensors. Many publications have reported various modification approaches to improve the selectivity of these materials. In the current work, a compact and informative review focusing on the most recent developments in graphene-based biosensors and gas sensors has been designed and delivered. The research community has provided a complete critical analysis of the most robust case studies from the latest fabrication routes to the most complex challenges. Some significant ideas and solutions have been proposed to overcome the limitations regarding the field of biosensors and hazardous gas sensors.

Fluorescent garlic-capped Ag nanoparticles as dual sensors for the detection of acetone and acrylamide

In order to protect human health from the adverse impacts of acrylamide and acetone, simple analytical processes are required to detect low concentrations of acrylamide and acetone. Dual functional garlic-capped silver nanoparticles (G-Ag NPs) have been used as fluorescent sensors for acrylamide and acetone. This technique depends on the quenching of the photoluminescence (PL) intensity of G-Ag NPs with the interaction of either acrylamide or acetone. This fluorescent probe presented high selectivity toward acrylamide with a wide linear response of 0.01-6 mM with a limit of detection (LOD) of 2.9 μM. Moreover, this probe also acted as a selective and sensitive fluorescent sensor for the detection of acetone in the range of 0.1-17 mM with LOD of 55 μM. The applicability of G-Ag NPs as a proposed sensor for acrylamide was evaluated using a potato chips sample with a recovery percentage of 102.4%. Acetone concentration is also quantified in human urine samples and the recoveries ranged from 98.8 to 101.7%. Repeatability and reproducibility studies for acrylamide and acetone offered relative standard deviation (RSD) of 0.9% and 1.5%, and 0.77% and 1.1%, respectively.

Design of fluorescent method for sensing toxic diazinon in water samples using PbS quantum dots-based gelatin

In this current article, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for toxic diazinon. The measure of toxic diazinon was performed using concentration 0.5 µM, PbS quantum dot-gelatin nanocomposites sensor, pH 6, and time 50 s, wavelength 300 nm, in phosphate buffer solution. Under the optimum conditions, the detection limit linear range was obtained (0.01-20.0 µg L^-1). The standard deviation of less than (1.0%), and detection limits (3S/m) of the method (0.01 µg L^-1) and quantification (LOQ) of (0.099 µg L^-1), for determination of toxic diazinon, was obtained. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the toxic diazinon. The Chemical PbS Quantum Dot-Gelatin nanocomposites sensor as excellent sensor was applied to measure and analyze residue toxic diazinon in water samples.

Graphene quantum dots: synthesis, properties, and applications to the development of optical and electrochemical sensors for chemical sensing

GQDs exhibits exceptional electrochemical activity owing to their active edge sites that make them very attractive for biosensing applications. However, their use in the design of new biosensing devices for application to the detection and quantification of toxins, pathogens, and clinical biomarkers has so far not investigated in detail. In this regard, herein we provide a detailed review on various methodologies employed for the synthesis of GQDs, including bottom-up and top-down approaches, with a special focus on their applications in biosensing via fluorescence, photoluminescence, chemiluminescence, electrochemiluminescence, fluorescence resonance energy transfer, and electrochemical techniques. We believe that this review will shed light on the critical issues and widen the applications of GQDs for the design of biosensors with improved analytical response for future applications. HIGHLIGHTS: • Properties of GQDs play a critical role in biosensing applications. • Synthesis of GQDs using top-down and bottom-up approaches is discussed comprehensively. • Overview of advancements in GQD-based sensors over the last decade. • Methods for the design of selective and sensitive GQD-based sensors. • Challenges and opportunities for future GQD-based sensors.

N, S-co-doped carbon/Co1-xS nanocomposite with dual-enzyme activities for a smartphone-based colorimetric assay of total cholesterol in human serum

We fabricated a novel N,S-co-doped carbon/Co_1-xS nanocomposite (NSC/Co_1-xS) using a facile sol-gel approach, which featured a multiporous structure, abundant S vacancies and Co-S nanoparticles filling the carbon-layer pores. When the Co_1-xS nanoparticles were anchored onto the surface of N,S-co-doped carbon, a synergistic catalysis action occurred. The NSC/Co_1-xS nanocomposites possessed both peroxidase-like and oxidase-mimetic dual-enzyme activities, in which the oxidase-mimetic activity dominated. By scavenger capture tests, the nanozyme was demonstrated to catalyze H₂O₂ to produce h⁺, •OH and •O₂^-, among which the strongest and weakest signals were h⁺ and •OH, respectively. The multi-valence states of Co atoms in the NSC/Co_1-xS structure facilitated electronic transfer that enhanced redox reactions, thereby improving the resultant color reaction. Based on the NSC/Co_1-xS's enzyme-mimetic catalytic reaction, a visual colorimetric assay and Android "Thing Identify" application (app), installed on a smartphone, offered detection limits of 1.93 and 2.51 mg/dl, respectively, in human serum samples. The selectivity/interference experiments, using fortified macromolecules and metal ions, demonstrated that this sensor had high selectivity and low interference potential for cholesterol analysis. Compared to standard assay kits and previously reported visual detection, the Android smartphone-based assays provided higher accuracy (recoveries up to 93.6-104.1%), feasibility for trace-level detection, and more convenient on-site application for cholesterol assay due to the superior enzymatic activity of NSC/Co_1-xS. These compelling performance metrics lead us to posit that the NSC/Co_1-xS-based nanozymic sensor offers a promising methodology for several practical applications, such as point-of-care diagnosis and workplace health evaluations.

High Photoluminescence Polyindole/CuInS Quantum Dots for Pb Ions Sensor

Polyindole is considered an excellent conducting polymer with interested properties for different applications. A novel polyindole (PIn)/CuInS (CIS)/ZnS quantum dots (QDs) nanocomposite was synthesized via in situ polymerization of PIn in presence of CIS/ZnS QDs. By investigating the effect of CIS/ZnS QDs on optical properties of PIn, it was found that the optical band gaps of PIn, CIS/ZnS QDs, and PIn/CIS/ZnS QDs nanocomposite were 3.24 eV, 4.68 eV and 3.44 eV, respectively. From the luminance spectra, it was observed that emission peaks of PIn at 442 and 468 nm are independent of the excitation wavelength with the highest intensity at excitation wavelength of 380 nm. However, the luminance spectrum of PIn/CIS/ZnS QDs nanocomposite exhibited a quenching peak for CIS/ZnS QDs while the intensity of PIn peak was enhanced. High resolution of transmission electron microscope image of CIS/ZnS QDs revealed nanocrystals with a size of 3–4.5 nm and lattice space of 0.2 nm. PIn/CIS/ZnS QDs nanocomposite as the fluorescent probe was employed for sensing different concentrations of Pb2+ from 5 to 50 ppb. The reaction between PIn/CIS/ZnS QDs and Pb2+ was slightly quenched and fixed after 90 min. The emission peak was reduced gradually with increasing concentration of lead via photo-induced electron transfer or ion exchange mechanism. The value of correlation coefficient (R2) was 0.99, the sensitivity was 0.0041 ppb−1 and limit of detection value was 4.48 ppb.

Ratiometric Fluorescence Probe of Vesicle-like Carbon Dots and Gold Clusters for Quantitation of Cholesterol

We report a facile method for the preparation of vesicle-like carbon dots (VCDs) via dry-heating of surfactant solutions. Like most reported CDs, the VCDs possess interesting fluorescence properties. Entrapment of enzymes and gold nanoclusters (AuNCs) inside the VCDs allows for the development of fluorescent probes for the quantitation of various substrates, with the advantages of high sensitivity and selectivity. The AuNCs act as a probe, and the VCDs as an internal standard confine the AuNCs, enzyme, and analyte to provide high local concentrations to enhance the assay sensitivity. In this study, we employed cholesterol oxidase (ChOX) as a model enzyme for the quantitation of cholesterol. The as-formed hydrogen peroxide through the enzyme reaction inside the VCDs causes fluorescence quenching of AuNCs (excitation/emission wavelengths of 320/670 nm), but not that of the VCDs (excitation/emission wavelengths of 320/400 nm). To improve the sensitivity and linearity, the fluorescence ratios of AuNCs/VCDs are plotted against analyte concentration. The present ratiometric fluorescent method allows for the detection of hydrogen peroxide over the concentration range of 1–100 μM, with a detection limit of 0.673 μM, and cholesterol concentrations ranging from 5 to 100 μM, with a detection limit of 2.8 μM. The practicality of this fluorescent method has been further validated by evaluating cholesterol levels in human serum samples with sufficient accuracy and recovery, revealing its great prospective in diagnosis and biomedical applications.

A novel NiVP/Pi-based flexible sensor for direct electrochemical ultrasensitive detection of cholesterol

A novel non-enzymatic electrochemical sensor was constructed to achieve a highly selective and ultrasensitive detection of cholesterol to address the problems related to serious coronary heart disease. The NiVP/Pi-based sensor exhibited ultra-high sensitivity of 5510.18 μA μM^-1 cm^-2 and 36.8 μA μM^-1 cm^-2 for 1 nM to 10 μM and 100 μM to 10 mM of cholesterol, respectively, with an ultra-low detection limit of 1 aM, along with superior selectivity for cholesterol when exposed to various interferents such as ascorbic acid, glucose and uric acid. Also, a novel NiVP/Pi-based flexible sensor coated onto Whatman filter paper was developed and displayed superior sensitivity, even with a human blood serum sample at physiological pH.

Pb2+ Responsive Cu-In-Zn-S Quantum Dots With Low Cytotoxicity

Water-soluble Cu-In-Zn-S quantum dots (CIZS QDs) with orange fluorescence have been synthesized with a glutathione (GSH) as stabilizer via facile a one-step hydrothermal method. The optimal reaction conditions of CIZS QDs including temperature, time, pH, and the molar ratios of precursors were studied. TEM results indicate that the aqueous-dispersible CIZS QDs are quasi-spherical, and the average diameters are 3.76 nm with excellent fluorescent stability. Furthermore, the cytotoxicity of CIZS QDs was investigated by the microcalorimetry combining with TEM and the IC50 was 10.2 μM. CIZS QDs showed a promising perspective in applications such as a fluorescent probe for bioimaging and biolabeling due to the low cytotoxicity and good biocompatibility. Moreover, the CIZS QDs can distinguish Pb2+ ion from other ions, offering great potentials in lead ion determination in drinking water. According to the results of UV, XRD, FL, PL, and ITC methods, the mechanism of CIZS QDs-Pb2+ assay is due to hydrogen bonding or van der Waals forces in the formation of Pb2+ and CIZS QDs.

Detection of Hg2+ by a Dual-Fluorescence Ratio Probe Constructed with Rare-Earth-Element-Doped Cadmium Telluride Quantum Dots and Fluorescent Carbon Dots

Quantum dots (QDs) and carbon quantum dots (CDs) are classes of zero-dimensional materials whose sizes can be ≤10 nm. They exhibit excellent optical properties and are widely used to prepare fluorescent probes for qualitative and quantitative detection of test objects. In this article, we used cerium chloride as the cerium source and used the in situ doped cerium (rare-earth element) to develop cadmium telluride (CdTe) quantum dots following the aqueous phase method. CdTe: Ce quantum dots were successfully synthesized. The solution of CdTe:Ce QDs was mixed with the CD solution prepared following the green microwave method to form a ratio fluorescence sensor that can be potentially used for the selective detection of mercury ions (Hg²⁺). We used transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and other microscopy and spectral characterization techniques to validate that Ce had been successfully doped. The test results on the fluorescence performance revealed that Ce doping enhances the predoped fluorescence performance of the CdTe QDs. We have quantitatively detected Hg²⁺ using a ratiometric fluorescence sensor to show that in the range of 10-60 nM, the fluorescence quenching efficiency increases linearly with the increase in Hg²⁺ concentration. The linear correlation coefficient R ² = 0.9978, and its detection limit was found to be 2.63 nM L^-1. It was observed that other interfering ions do not significantly affect the fluorescence intensity of the probe. According to the results of the blank addition experiment, the developed proportional fluorescence probe can be used for the detection of Hg²⁺ in actual samples.

Acute toxicity assessment of polyaniline/Ag nanoparticles/graphene oxide quantum dots on Cypridopsis vidua and Artemia salina

Nanotoxicology is argued and considered one of the emerging topics. In this study, polyaniline (PANI)/2-acrylamido-2-methylpropanesulfonic acid (AMPSA) capped silver nanoparticles (NPs)/graphene oxide (GO) quantum dots (QDs) nanocomposite (PANI/Ag (AMPSA)/GO QDs NC) as a nanoadsorbent has a potential for removal of toxic hexavalent chromium (Cr(VI)) ions from water. The acute toxicity of this NC was evaluated on Artemia salina and freshwater Ostracods (Cypridopsis vidua) larvae for 48 h. The measurements were made at 24 and 48 h with 3 repetitions. The 50% effective concentration (EC50) values of the NC were determined after the exposure of these organisms. According to the results of the optical microscope, it was found that both experimental organisms intake the NC. In the toxicity results of Ostracods, the NC had a highly toxic effect only at 250 mg/L after 48 h and the EC50 value was 157.6 ± 6.4 mg/L. For Artemia salina individuals, it was noted that they were less sensitive than the Ostracods and EC50 value was 476 ± 25.1 mg/L after 48 h. These results indicated that PANI/Ag (AMPSA)/GO QDs NC has low toxicity towards both investigated organisms.