Size and aspect ratio control of Pd₂Sn nanorods and their water denitration properties

Easy preparation of small crystalline Pd2Sn nanoparticles in solution at room temperature

We describe here a simple protocol yielding small (<2 nm) crystalline Pd₂Sn nanoparticles (NPs) along with Pd homologues for sake of comparison. These NPs were obtained via an organometallic approach using Pd₂(dba)₃·dba (dba = dibenzylideneacetone) in THF with 2 equivalents of tributyltin hydride under 4 bars of H₂ at room temperature. The Pd NP homologues were prepared similarly, using Pd₂(dba)₃·dba with 2 equivalents of n-octylsilane. These NPs were found to be crystalline and very small with a similar mean size (ca. 1.5 nm). These NPs were finally used as nanocatalysts in solution for a benchmark Suzuki-Miyaura cross-coupling reaction. The Pd₂Sn NPs were found to be more active than Pd NPs analogues, exhibiting remarkable performances with Pd loading as low as 13 ppb. This result demonstrates a beneficial effect of tin on palladium in catalysis.

Bimetallic Pd/Sn-based Nanoparticles and their Catalytic Properties in the Semihydrogenation of Diphenylacetylene

Multimetallic nanoparticles often enhance the catalytic performance of their monometallic counterparts by increasing reaction rates, catalyst selectivity, and/or stability. A prerequisite for understanding structure- and composition-associated properties, however, is the careful design of multimetallic nanoparticles with various structures and compositions. Here, bimetallic Pd/Sn-based nanoparticles are prepared with a tunable composition and structure exploiting ionic liquids (ILs) as reaction medium (i. e., methyltrioctylammonium bis(trifluoromethylsulfonyl)imide). The nanoparticles are obtained in a one-pot synthetic procedure by reducing the metal salt precursors with triethylborohydride in the IL. The results show that the reaction parameters, in particular the nature and ratio of the Pd2+ /Sn2+ precursors as well as the reaction temperature, influence NP formation and composition. X-ray diffraction with Rietveld analysis and transmission electron microscopy are employed to determine NP size and phase composition. Under optimized reaction conditions Pd2 Sn or PdSn nanocrystals are formed as single-phase products after introducing an additional annealing step at 200 °C. Nanocrystals with intermetallic composition reveal enhanced catalytic properties in the semihydrogenation of diphenylacetylene which was used as a model reaction.

Au-Doped intermetallic Pd3Pb wavy nanowires as highly efficient electrocatalysts toward the oxygen reduction reaction

Au-Doped intermetallic Pd₃Pb wavy nanowires were synthesized and exhibited substantially enhanced properties for the oxygen reduction reaction relative to commercial Pt/C.

Intermetallic Pd3Pb ultrathin nanoplate-constructed flowers with low-coordinated edge sites boost oxygen reduction performance

Although tremendous efforts have been devoted to exploring non-Pt based electrocatalysts toward the oxygen reduction reaction (ORR), achievements in both catalytic activity and durability are still far from satisfactory. Here, we report a facile approach for the synthesis of intermetallic Pd3Pb ultrathin nanoplate-constructed flowers. Such highly opened hierarchical nanostructures with an ordered phase and low-coordinated edge sites exhibited a substantially enhanced activity toward the ORR. Especially, the intermetallic Pd3Pb nanoflowers achieved a record-breaking mass activity (1.14 mA μgPd-1) in an alkaline solution at 0.9 V vs. a reversible hydrogen electrode among the reported Pd-based ORR electrocatalysts to date, which was 1.8, 3.9 and 11.4 times higher than those of intermetallic Pd3Pb nanocubes, Pd3Pb dendrites and commercial Pt/C, respectively. More importantly, the intermetallic Pd3Pb nanoflowers also showed a higher durability with only 23.7% loss in mass activity after 10 000 cycles compared to the commercial Pt/C (35% loss in mass activity) due to their chemically stable intermetallic structures.

Growth of Au-Pd2Sn Nanorods via Galvanic Replacement and Their Catalytic Performance on Hydrogenation and Sonogashira Coupling Reactions

Colloidal Pd₂Sn and Au-Pd₂Sn nanorods (NRs) with tuned size were produced by the reduction of Pd and Sn salts in the presence of size- and shape-controlling agents and the posterior growth of Au tips through a galvanic replacement reaction. Pd₂Sn and Au-Pd₂Sn NRs exhibited high catalytic activity toward quasi-homogeneous hydrogenation of alkenes (styrene and 1-octene) and alkynes (phenylacetylene and 1-octyne) in dichloromethane. Au-Pd₂Sn NRs showed higher activity than Pd₂Sn for 1-octene, 1-octyne, and phenylacetylene. In Au-Pd₂Sn heterostructures, X-ray photoelectron spectroscopy evidenced an electron donation from the Pd₂Sn NR to the Au tips. Such heterostructures showed distinct catalytic behavior in the hydrogenation of compounds containing a triple bond such as tolan. This can be explained by the aurophilicity of triple bonds. To further study this effect, Pd₂Sn and Au-Pd₂Sn NRs were also tested in the Sonogashira coupling reaction between iodobenzene and phenylacetylene in N, N-dimethylformamide. At low concentration, this reaction provided the expected product, tolan. However, at high concentration, more reduced products such as stilbene and 1,2-diphenylethane were also obtained, even without the addition of H₂. A mechanism for this unexpected reduction is proposed.

The Many "Facets" of Halide Ions in the Chemistry of Colloidal Inorganic Nanocrystals

Over the years, scientists have identified various synthetic "handles" while developing wet chemical protocols for achieving a high level of shape and compositional complexity in colloidal nanomaterials. Halide ions have emerged as one such handle which serve as important surface active species that regulate nanocrystal (NC) growth and concomitant physicochemical properties. Halide ions affect the NC growth kinetics through several means, including selective binding on crystal facets, complexation with the precursors, and oxidative etching. On the other hand, their presence on the surfaces of semiconducting NCs stimulates interesting changes in the intrinsic electronic structure and interparticle communication in the NC solids eventually assembled from them. Then again, halide ions also induce optoelectronic tunability in NCs where they form part of the core, through sheer composition variation. In this review, we describe these roles of halide ions in the growth of nanostructures and the physical changes introduced by them and thereafter demonstrate the commonality of these effects across different classes of nanomaterials.

Tin-palladium supported on alumina as a highly active and selective catalyst for hydrogenation of nitrate in actual groundwater polluted with nitrate

We developed SnPd/Al₂O₃ showing high catalytic performance for the hydrogenation of NO₃⁻ in actual groundwater polluted with NO₃⁻.

Intermetallic Nanocrystals: Syntheses and Catalytic Applications

At the forefront of nanochemistry, there exists a research endeavor centered around intermetallic nanocrystals, which are unique in terms of long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure. In contrast to alloy nanocrystals with no elemental ordering, it is challenging to synthesize intermetallic nanocrystals with a tight control over their size and shape. Here, recent progress in the synthesis of intermetallic nanocrystals with controllable sizes and well-defined shapes is highlighted. A simple analysis and some insights key to the selection of experimental conditions for generating intermetallic nanocrystals are presented, followed by examples to highlight the viable use of intermetallic nanocrystals as electrocatalysts or catalysts for various reactions, with a focus on the enhanced performance relative to their alloy counterparts that lack elemental ordering. Within the conclusion, perspectives on future developments in the context of synthetic control, structure-property relationships, and applications are discussed.

A novel sandwich-type immunosensor based on three-dimensional graphene–Au aerogels and quaternary chalcogenide nanocrystals for the detection of carcino embryonic antigen

Cu₂ZnSnS₄ nanocrystals were firstly used as electrocatalysts in H₂O₂ reduction for ultrasensitive detection of carcino embryonic antigen.

An ultrasensitive electrochemical immunosensor based on the synergistic effect of quaternary Cu2SnZnS4 NCs and cyclodextrin-functionalized graphene

Cu₂ZnSnS₄ nanocrystals were first used as electrocatalysts for H₂O₂ reduction for the ultrasensitive detection of alpha-fetoprotein.

Fe3O4@NiFexOy Nanoparticles with Enhanced Electrocatalytic Properties for Oxygen Evolution in Carbonate Electrolyte

The design and engineering of earth-abundant catalysts that are both cost-effective and highly active for water splitting are crucial challenges in a number of energy conversion and storage technologies. In this direction, herein we report the synthesis of Fe₃O₄@NiFe_xO_y core-shell nanoheterostructures and the characterization of their electrocatalytic performance toward the oxygen evolution reaction (OER). Such nanoparticles (NPs) were produced by a two-step synthesis procedure involving the colloidal synthesis of Fe₃O₄ nanocubes with a defective shell and the posterior diffusion of nickel cations within this defective shell. Fe₃O₄@NiFe_xO_y NPs were subsequently spin-coated over ITO-covered glass and their electrocatalytic activity toward water oxidation in carbonate electrolyte was characterized. Fe₃O₄@NiFe_xO_y catalysts reached current densities above 1 mA/cm² with a 410 mV overpotential and Tafel slopes of 48 mV/dec, which is among the best electrocatalytic performances reported in carbonate electrolyte.

Co-Cu Nanoparticles: Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation

The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-Co3O4 nanoparticles with randomly distributed CuO and Co3O4 crystallites. During a posterior reduction treatment in H2 atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO2 hydrogenation in real working conditions.

Rational design of nanomaterials for water treatment

The ever-increasing human demand for safe and clean water is gradually pushing conventional water treatment technologies to their limits. It is now a popular perception that the solutions to the existing and future water challenges will hinge upon further developments in nanomaterial sciences. The concept of rational design emphasizes on 'design-for-purpose' and it necessitates a scientifically clear problem definition to initiate the nanomaterial design. The field of rational design of nanomaterials for water treatment has experienced a significant growth in the past decade and is poised to make its contribution in creating advanced next-generation water treatment technologies in the years to come. Within the water treatment context, this review offers a comprehensive and in-depth overview of the latest progress in rational design, synthesis and applications of nanomaterials in adsorption, chemical oxidation and reduction reactions, membrane-based separation, oil-water separation, and synergistic multifunctional all-in-one nanomaterials/nanodevices. Special attention is paid to the chemical concepts related to nanomaterial design throughout the review.