Highly sensitive diagnostic assay for the detection of protein biomarkers using microresonators and multifunctional nanoparticles

COVID-19 cooling: Nanostrategies targeting cytokine storm for controlling severe and critical symptoms

As severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants continue to wreak havoc worldwide, the "Cytokine Storm" (CS, also known as the inflammatory storm) or Cytokine Release Syndrome has reemerged in the public consciousness. CS is a significant contributor to the deterioration of infected individuals. Therefore, CS control is of great significance for the treatment of critically ill patients and the reduction of mortality rates. With the occurrence of variants, concerns regarding the efficacy of vaccines and antiviral drugs with a broad spectrum have grown. We should make an effort to modernize treatment strategies to address the challenges posed by mutations. Thus, in addition to the requirement for additional clinical data to monitor the long-term effects of vaccines and broad-spectrum antiviral drugs, we can use CS as an entry point and therapeutic target to alleviate the severity of the disease in patients. To effectively combat the mutation, new technologies for neutralizing or controlling CS must be developed. In recent years, nanotechnology has been widely applied in the biomedical field, opening up a plethora of opportunities for CS. Here, we put forward the view of cytokine storm as a therapeutic target can be used to treat critically ill patients by expounding the relationship between coronavirus disease 2019 (COVID-19) and CS and the mechanisms associated with CS. We pay special attention to the representative strategies of nanomaterials in current neutral and CS research, as well as their potential chemical design and principles. We hope that the nanostrategies described in this review provide attractive treatment options for severe and critical COVID-19 caused by CS.

Design of a highly sensitive and versatile membrane-based immunosensor using a Cu-free click reaction

A highly sensitive immunosensor is developed using membrane pores as the recognition interface. In this sensor, a Cu-free click reaction is used to efficiently immobilize antibodies, and the sensor inhibits the adsorption of nonspecific proteins that degrade sensitivity. Furthermore, the sensor demonstrates rapid interleukin-6 detection in the picogram per milliliter range.

Relay-type sensing mode: A strategy to push the limit on nanomechanical sensor sensitivity based on the magneto lever

Ultrasensitive molecular detection and quantization are crucial for many applications including clinical diagnostics, functional proteomics, and drug discovery; however, conventional biochemical sensors cannot satisfy the stringent requirements, and this has resulted in a long-standing dilemma regarding sensitivity improvement. To this end, we have developed an ultrasensitive relay-type nanomechanical sensor based on a magneto lever. By establishing the link between very weak molecular interaction and five orders of magnitude larger magnetic force, analytes at ultratrace level can produce a clearly observable mechanical response. Initially, proof-of-concept studies showed an improved detection limit up to five orders of magnitude when employing the magneto lever, as compared with direct detection using probe alone. In this study, we subsequently demonstrated that the relay-type sensing mode was universal in application ranging from micromolecule to macromolecule detection, which can be easily extended to detect enzymes, DNA, proteins, cells, viruses, bacteria, chemicals, etc. Importantly, we found that, sensitivity was no longer subject to probe affinity when the magneto lever was sufficiently high, theoretically, even reaching single-molecule resolution.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (experimental section) is available in the online version of this article at 10.1007/s12274-022-5049-0.

Interferon-γ detection in point of care diagnostics: Short review

Interferon (IFN)-γ is a cytokine secreted by immune cells. The elevated levels of IFN-γ are an early indicator of multiple diseases such as tuberculosis and autoimmune diseases. This short review focuses on different sensing methods based on optical, electrochemical, and mechanical principles. We explain how specific biorecognition molecules such as antibodies and aptamers are employed in the sensing methods. We also compare different surface functionalization methods and their details. Although the review gives an overview of only IFN-γ sensing, the same strategies can be applied to sensing other analytes with appropriate modifications.

Nanomechanical sensor for rapid and ultrasensitive detection of tumor markers in serum using nanobody

Early cancer diagnosis requires ultrasensitive detection of tumor markers in blood. To this end, we develop a novel microcantilever immunosensor using nanobodies (Nbs) as receptors. As the smallest antibody (Ab) entity comprising an intact antigen-binding site, Nbs achieve dense receptor layers and short distances between antigen-binding regions and sensor surfaces, which significantly elevate the generation and transmission of surface stress. Owing to the inherent thiol group at the C-terminus, Nbs are covalently immobilized on microcantilever surfaces in directed orientation via one-step reaction, which further enhances the stress generation. For microcantilever-based nanomechanical sensor, these advantages dramatically increase the sensor sensitivity. Thus, Nb-functionalized microcantilevers can detect picomolar concentrations of tumor markers with three orders of magnitude higher sensitivity, when compared with conventional Ab-functionalized microcantilevers. This proof-of-concept study demonstrates an ultrasensitive, label-free, rapid, and low-cost method for tumor marker detection. Moreover, interestingly, we find Nb inactivation on sensor interfaces when using macromolecule blocking reagents. The adsorption-induced inactivation is presumably caused by the change of interfacial properties, due to binding site occlusion upon complex coimmobilization formations. Our findings are generalized to any coimmobilization methodology for Nbs and, thus, for the construction of high-performance immuno-surfaces.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (experimental section, HER2 detection using anti-HER2-mAb-functionalized microcantilevers) is available in the online version of this article at 10.1007/s12274-021-3588-4.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

A Portable Microfluidic System for Point-of-Care Detection of Multiple Protein Biomarkers

Protein biomarkers are indicators of many diseases and are commonly used for disease diagnosis and prognosis prediction in the clinic. The urgent need for point-of-care (POC) detection of protein biomarkers has promoted the development of automated and fully sealed immunoassay platforms. In this study, a portable microfluidic system was established for the POC detection of multiple protein biomarkers by combining a protein microarray for a multiplex immunoassay and a microfluidic cassette for reagent storage and liquid manipulation. The entire procedure for the immunoassay was automatically conducted, which included the antibody–antigen reaction, washing and detection. Alpha-fetoprotein (AFP), carcinoembryonic antigen (CEA) and carcinoma antigen 125 (CA125) were simultaneously detected in this system within 40 min with limits of detection of 0.303 ng/mL, 1.870 ng/mL, and 18.617 U/mL, respectively. Five clinical samples were collected and tested, and the results show good correlations compared to those measured by the commercial instrument in the hospital. The immunoassay cassette system can function as a versatile platform for the rapid and sensitive multiplexed detection of biomarkers; therefore, it has great potential for POC diagnostics.

Impedimetric Detection of Femtomolar Levels of Interleukin6, Interleukin 8, and Tumor Necrosis Factor Alpha Based on Thermally Modified Nanotubular Titanium Dioxide Arrays

An inexpensive, easy to prepare, and label-free electrochemical impedance spectroscopy-based biosensor has been developed for the selective detection of human interleukin 6 (IL-6), interleukin 8 (CXCL8, IL-8), and tumor necrosis factor (TNFα)-potential inflammatory cancer biomarkers. We describe a, so far, newly developed and unexplored method to immobilize antibodies onto a titanium dioxide nanotube (TNT) array by physical adsorption. Immobilization of anti-IL-6, anti-IL-8, and anti-TNFα on TNT and the detection of human IL-6, IL-8, and TNFα were examined using electrochemical impedance spectroscopy (EIS). The impedimetric immunosensor demonstrates good selectivity and high sensitivity against human biomarker analytes and can detect IL-6, IL-8, and TNFα at concentrations as low as 5 pg/mL, equivalent to the standard concentration of these proteins in human blood. The calibration curves evidenced that elaborated biosensors are sensitive to three cytokines within 5 ÷ 2500 pg/mL in the 0.01 M phosphate-buffered saline solution (pH 7.4).

Micro/Nano fabricated cantilever based biosensor platform: A review and recent progress

Recent trends in biosensing research have motivated scientists and research professionals to investigate the development of miniaturized bioanalytical devices to make them portable, label-free and smaller in size. The performance of the cantilever-based devices which is one of the very important domains of sensitive field level detection has improved significantly with the development of new micro/nanofabrication technologies and surface functionalization techniques. The cantilevers have scaled down to Nano from micro-level and have become exceptionally sensitive and also have some anomalous associated properties due to the scale. In this review we have discussed about fundamental principles of cantilever operation, detection methods, and previous, present and future approaches of study through cantilever-based sensing platform. Other than that, we have also discussed the past major bio-sensing efforts through micro/nano cantilevers and about recent progress in the field.

Microcantilever Array Biosensor for Simultaneous Detection of Carcinoembryonic Antigens and α-Fetoprotein Based on Real-Time Monitoring of the Profile of Cantilever

A microcantilever array biosensor based on a sandwich structure has been developed for simultaneously measuring two biomarkers carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) via an optical readout technique-real-time monitoring of the profile of cantilever. First, the aptamers of CEA and AFP were self-assembled on their respective cantilevers. After the adsorption of the mixture of CEA and AFP, further specific interaction was performed via the addition of the antibodies specific to each target. The compressive stress on the cantilever was generated by the aptamer-antigen-antibody sandwich structure formed on the gold surface, resulting in cantilever bending. The profile of cantilever could be monitored in real time. The relationship between the deflection value at the 90% position of the cantilever and the target concentration served as a calibration curve, and the detection sensitivity was 1.3 ng/mL for CEA and 0.6 ng/mL for AFP, respectively. This work demonstrated the ability of simultaneously measuring two biomarkers via a microcantilever array biosensor, giving great potential for further application in detecting several targets simultaneously for early clinical diagnosis.

A supramolecular approach for versatile biofunctionalization of magnetic nanoparticles

A convenient and versatile approach for biofunctionalization of magnetic nanoparticles was developed based on supramolecular host–guest interaction.

Facile synthesis of thiazole-functionalized magnetic microspheres for highly specific separation of heme proteins

Thiazole-functionalized magnetic microspheres which exhibited high selectivity to capture hemoglobin with a binding capacity of 2.02 g g⁻¹ were successfully synthesized.

Emerging metrology for high-throughput nanomaterial genotoxicology

The rapid development of the engineered nanomaterial (ENM) manufacturing industry has accelerated the incorporation of ENMs into a wide variety of consumer products across the globe. Unintentionally or not, some of these ENMs may be introduced into the environment or come into contact with humans or other organisms resulting in unexpected biological effects. It is thus prudent to have rapid and robust analytical metrology in place that can be used to critically assess and/or predict the cytotoxicity, as well as the potential genotoxicity of these ENMs. Many of the traditional genotoxicity test methods [e.g. unscheduled DNA synthesis assay, bacterial reverse mutation (Ames) test, etc.,] for determining the DNA damaging potential of chemical and biological compounds are not suitable for the evaluation of ENMs, due to a variety of methodological issues ranging from potential assay interferences to problems centered on low sample throughput. Recently, a number of sensitive, high-throughput genotoxicity assays/platforms (CometChip assay, flow cytometry/micronucleus assay, flow cytometry/γ-H2AX assay, automated 'Fluorimetric Detection of Alkaline DNA Unwinding' (FADU) assay, ToxTracker reporter assay) have been developed, based on substantial modifications and enhancements of traditional genotoxicity assays. These new assays have been used for the rapid measurement of DNA damage (strand breaks), chromosomal damage (micronuclei) and for detecting upregulated DNA damage signalling pathways resulting from ENM exposures. In this critical review, we describe and discuss the fundamental measurement principles and measurement endpoints of these new assays, as well as the modes of operation, analytical metrics and potential interferences, as applicable to ENM exposures. An unbiased discussion of the major technical advantages and limitations of each assay for evaluating and predicting the genotoxic potential of ENMs is also provided.

Visible-light driven biofuel cell based on hierarchically branched titanium dioxide nanorods photoanode for tumor marker detection

In this work, a novel sensing platform based on visible light driven biofuel cell (BFC) has been facilely designed for sensitive detection of prostate-specific antigen (PSA) with the photo-response bioanode, realizing the dual route energy conversion of light energy and chemical energy to electricity. The hierarchical branched TiO2 nanorods (B-TiO2 NRs) decorated with CdS quantum dots (QDs) act as the substrate to confine glucose dehydrogenase (GDH) for the visible light driven glucose oxidation at the bioanode. Three dimensional flowers like hierarchical carbon/gold nanoparticles/bilirubin oxidase (3D FCM/AuNPs/BOD) bioconjugate served as biocatalyst for O2 reduction at the biocathode. With an increase in the concentration of PSA, the amount of BOD labels on biocathode increases, thus leading to the higher current output of the as-proposed visible light driven BFC. Based on this, this sensing platform provide great performance in sensitivity and specificity, increasing linear detection range from 0.3pgmL(-1) to 7μgmL(-1) with a detection limit of 0.1pgmL(-1). Most importantly, our new sensing strategy provided a simple and inexpensive sensing platform for tumor markers detection, suggesting its wide potential applications for clinical diagnostics.

Recent advances in cytokine detection by immunosensing

The detection of cytokines in body fluids, cells, tissues and organisms continues to attract considerable attention due to the importance of these key cell signaling molecules in biology and medicine. In this review, we describe recent advances in cytokine detection in the course of ongoing pursuit of new analytical approaches for these trace analytes with specific focus on immunosensing. We discuss recent elegant designs of sensing interface with improved performance with respect to sensitivity, selectivity, stability, simplicity, and the absence of sample matrix effects. Various immunosensing approaches based on multifunctional nanomaterials open novel opportunities for ultrasensitive detection of cytokines in body fluids in vitro and in vivo. Methodologies such as suspension arrays also known as bead assays together with optical fiber-based sensors, on their own or in combination with microfluidic devices will continue to have an important role to address the grand challenge of real-time in vivo multiplex cytokine detection.

Au nanoparticle decorated graphene nanosheets for electrochemical immunosensing of p53 antibodies for cancer prognosis

Thiolated self-assembled reduced graphene oxide films were decorated with gold nanoparticles for development of a label-free p53-antibody immunosensor.

Nanosensors for early cancer detection and for therapeutic drug monitoring

The use of nanotechnology for drug delivery in cancer therapy has raised high expectations. Additionally, the use of nanomaterials in sensors to extract and detect tumor specific biomarkers, circulating tumor cells, or extracellular vesicles shed by the tumor holds the promise to detect cancer much earlier and hence improve long-term survival of the patients. Moreover, the monitoring of the anticancer drug concentration, which has a narrow therapeutic window, will allow for a personalized dosing of the drug and will lead to improved therapeutic outcome and life quality of the patient. This review will provide an overview on the use of nanosensors for the early diagnosis of cancer and for the therapeutic drug monitoring, giving some examples. We envision nanosensors to make significant improvements in the cancer management as easy-to-use point-of-care devices for a broad population of users.

Quantification of cell viability and rapid screening anti-cancer drug utilizing nanomechanical fluctuation

Cancer is a serious threat to human health. Although numerous anti-cancer drugs are available clinically, many have shown toxic side effects due to poor tumor-selectivity, and reduced effectiveness due to cancers rapid development of resistance to treatment. The development of new highly efficient and practical methods to quantify cell viability and its change under drug treatment is thus of significant importance in both understanding of anti-cancer mechanism and anti-cancer drug screening. Here, we present an approach of utilizing a nanomechanical fluctuation based highly sensitive microcantilever sensor, which is capable of characterizing the viability of cells and quantitatively screening (within tens of minutes) their responses to a drug with the obvious advantages of a rapid, label-free, quantitative, noninvasive, real-time and in-situ assay. The microcantilever sensor operated in fluctuation mode was used in evaluating the paclitaxel effectiveness on breast cancer cell line MCF-7. This study demonstrated that the nanomechanical fluctuations of the microcantilever sensor are sensitive enough to detect the dynamic variation in cellular force which is provided by the cytoskeleton, using cell metabolism as its energy source, and the dynamic instability of microtubules plays an important role in the generation of the force. We propose that cell viability consists of two parts: biological viability and mechanical viability. Our experimental results suggest that paclitaxel has little effect on biological viability, but has a significant effect on mechanical viability. This new method provides a new concept and strategy for the evaluation of cell viability and the screening of anti-cancer drugs.

Cancer biomarker detection: recent achievements and challenges

We provide an overview covering the existing challenges and latest developments in achieving high selectivity and sensitivity cancer-biomarker detection.

Label-free detection of kanamycin using aptamer-based cantilever array sensor

A label-free detection method of kanamycin using aptamer-based cantilever array sensor was developed. The cantilever array was composed of sensing cantilevers and reference cantilevers. This configuration allowed direct detection of individual cantilever deflections and subsequent determination of differential deflection of sensing/reference cantilever pair. The sensing cantilevers were functionalized with kanamycin aptamer, which was used as receptor molecules while the reference cantilevers were modified with 6-mercapto-1-hexanol (MCH) to eliminate the influence of environmental disturbances. The kanamycin-aptamer interaction induced a change in cantilever surface stress, which caused a differential deflection between the sensing and reference cantilever pair. The surface stress change was linear with kanamycin concentration over the range of 100 μM-10mM with a correlation coefficient of 0.995. A detection limit of 50 μM was obtained, at a signal-to-noise ratio of 3. The sensor also showed good selectivity against other antibiotics such as neomycin, ribostamycin and chloramphenicol. The facile method for kanamycin detection may have great potential for investigating more other molecules.

Magnetic colloidal supraparticles: design, fabrication and biomedical applications

Magnetic nanoparticles (MNPs) bear many intriguing properties such as superparamagnetism, high specific surface area, remarkable colloidal stability and biocompatibility, which evoke great interest and desire of exploration in biomedical applications. For the use in the complicated physiological environment, MNPs are still being developed to have the enhanced performances and down-to-earth practicality. Engineering of MNPs into hierarchical structures is thus proposed to create a new family of magnetic materials, magnetic colloidal supraparticles (MCSPs), which exhibit collective properties and unique nanomaterial characters. From a biomedical point of view, applicability of MCSPs is somewhat more distinctive in contrast to their primary MNPs, because MCSPs are amenable to modulation of secondary structure, promotion of magnetic responsiveness and ease of function design. As a result, MCSPs have been subject to intense researches in recent years, with the aim to develop outstanding composite materials for biomedical applications. In this review, we embark on an overview of foundational topics that detail the design and fabrication of MCSPs by evaporation-induced emulsion and solvothermal techniques, and continue with a guideline for modification of MCSPs with inorganic oxides and organic polymers. Particular focus is then placed on the biomedical applications of modified MCSPs. Many examples illustrate the latest progress in design of MCSP-based microspheres for magnetic resonance imaging, targeted drug delivery, sensing, and harvesting of peptides/proteins. After these detailed accounts, the current challenges and future development of researches and applications are discussed as a conclusion to the review.

Highly sensitive nanomechanical assay for the stress transmission of carbon chain

Here, we report the first quantitative experimental study into the molecular basis of the transmission of mechanical signal that originates from biochemical reaction focusing on the length of carbon chain. We designed an experiment by using n-alkanethiols with a same carboxyl group and different chain lengths (n = 1, 5, 10 and 15) to immobilize a same receptor molecule on the gold surface of a microcantilever, and detected the nanomechanical response of biochemical reaction. The sensitivity of the microcantilever was found to be greatly influenced by the chain length of linker that is between the receptor molecule and the microcantilever surface. The efficiency of stress transmission increases significantly with decreasing length of carbon chain. At the same time, we develop a label-free microcantilever sensor for highly sensitive detection of Glycyrrhizic acid (GL). The detection limit of the microcantilever sensor for GL is found to be as low as 20 pg/mL for the shortest linker (n = 1), which is 500 times lower than the longest linker (n = 15) and 50 times lower than that of the corresponding icELISA. These findings will provide new insights into the fundamental mechanisms of stress transmission, which may be exploited for biochemical sensor and nanoactuation applications.

One-pot solvothermal synthesis of highly water-dispersible size-tunable functionalized magnetite nanocrystal clusters for lipase immobilization

A facile one-pot synthesis of highly water-dispersible size-tunable magnetite (Fe3O4) nanocrystal clusters (MNCs) end-functionalized with amino or carboxyl groups by a modified solvothermal reduction reaction has been developed. Dopamine and 3,4-dihydroxyhydroxycinnamic acid were used for the first time as both a surfactant and interparticle linker in a polylol process for economical and environment-friendly purposes. Morphology, chemical composition, and magnetic properties of the prepared particles were investigated by several methods, including FESEM, TEM, XRD, XPS, Raman, FTIR, TGA, zeta potential, and VSM. The sizes of the particles could be easily tuned over a wide range from 175 to 500 nm by varying the surfactant concentration. Moreover, ethylene glycol/diethylene glycol (EG/DEG) solvent mixtures with different ratios could be used as reductants to obtain the particles with smaller sizes. The XRD data demonstrated that the surfactants restrained the crystal growth of the grains. The nanoparticles showed superior magnetic properties and high colloidal stability in water. The cytotoxicity results indicated the feasibility of using the synthesized nanocrystals in biology-related fields. To estimate the applicability of the obtained MNCs in biotechnology, Candida rugosa lipase was selected for the enzyme immobilization process. The immobilized lipase exhibited excellent thermal stability and reusability in comparison with the free enzyme. This novel strategy would simplify the reaction protocol and improve the efficiency of materials functionalization, thus offering new potential applications in biotechnology and organocatalysis.

Tackling reproducibility in microcantilever biosensors: a statistical approach for sensitive and specific end-point detection of immunoreactions

In the last decade, microcantilever biosensors have shown enormous potential for highly sensitive label-free detection of nucleic acid and proteins. Despite the enormous advances, the promise of applications of this technology in the biomedical field has been frustrated because of its low reproducibility. Here we tackle the reproducibility issue in microcantilever biosensors and provide the guidelines to minimize the deviations in the biosensor response between different assays. We use as a model system the label-free end-point detection of horseradish peroxidase. We choose the end-point detection mode because of its suitability for implementation in the clinical field that requires simplicity and point-of-care capability. Our study comprises the analysis of 1012 cantilevers with different antibody surface densities, two blocking strategies based on polyethylene-glycol (PEG) and bovine serum albumin (BSA) and stringent controls. The study reveals that the performance of the assay critically depends on both antibody surface density and blocking strategies. We find that the optimal conditions involve antibody surface densities near but below saturation and blocking with PEG. We find that the surface stress induced by the antibody-antigen binding is significantly correlated with the surface stress generated during the antibody attachment and blocking steps. The statistical correlation is harnessed to identify immobilization failure or success, and thus enhancing the specificity and sensitivity of the assay. This procedure enables achieving rates of true positives and true negatives of 90% and 91% respectively. The detection limit is of 10 ng mL(-1) (250 pM) that is similar to the detection limit obtained in our enzyme-linked immunosorbent assay (ELISA) and at least two orders of magnitude smaller than that achieved with well-established label-free biosensors such as a quartz crystal microbalance (QCM) and surface plasmon resonance (SPR) sensor.

Sandwich-type immunosensors and immunoassays exploiting nanostructure labels: A review

Methods based on sandwich-type immunosensors and immunoassays have been developed for detection of multivalent antigens/analytes with more than one eptiope due to the use of two matched antibodies. High-affinity antibodies and appropriate labels are usually employed for the amplification of detectable signal. Recent research has looked to develop innovative and powerful novel nanoparticle labels, controlling and tailoring their properties in a very predictable manner to meet the requirements of specific applications. This articles reviews recent advances, exploiting nanoparticle labels, in the sandwich-type immunosensors and immunoassays. Routine approaches involve noble metal nanoparticles, carbon nanomaterials, semiconductor nanoparticles, metal oxide nanostructures, and hybrid nanostructures. The enormous signal enhancement associated with the use of nanoparticle labels and with the formation of nanoparticle-antibody-antigen assemblies provides the basis for sensitive detection of disease-related proteins or biomolecules. Techniques commonly rely on the use of biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tag-doped nanoparticles. Rather than being exhaustive, this review focuses on selected examples to illustrate novel concepts and promising applications. Approaches described include the biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tage-doped nanoparticles. Further, promising application in electrochemical, mass-sensitive, optical and multianalyte detection are discussed in detail.

Challenges for nanomechanical sensors in biological detection

Nanomechanical biosensing relies on changes in the movement and deformation of micro- and nanoscale objects when they interact with biomolecules and other biological targets. This field of research has provided ever-increasing records in the sensitivity of label-free detection but it has not yet been established as a practical alternative for biological detection. We analyze here the latest advancements in the field, along with the challenges remaining for nanomechanical biosensors to become a commonly used tool in biology and biochemistry laboratories.