Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Formation of biologically influenced palladium microstructures by Desulfovibrio desulfuricans and Desulfovibrio ferrophilus IS5

A range of Desulfovibrio spp. can reduce metal ions to form metallic nanoparticles that remain attached to their surfaces. The bioreduction of palladium (Pd) has been given considerable attention due to its extensive use in areas of catalysis and electronics and other technological domains. In this study we report, for the first time, evidence for Pd(II) reduction by the highly corrosive Desulfovibrio ferrophilus IS5 strain to form surface attached Pd nanoparticles, as well as rapid formation of Pd(0) coated microbial nanowires. These filaments reached up to 8 µm in length and led to the formation of a tightly bound group of interconnected cells with enhanced ability to attach to a low carbon steel surface. Moreover, when supplied with high concentrations of Pd (≥ 100 mmol Pd(II) g^-1 dry cells), both Desulfovibrio desulfuricans and D. ferrophilus IS5 formed bacteria/Pd hybrid porous microstructures comprising millions of cells. These three-dimensional structures reached up to 3 mm in diameter with a dose of 1200 mmol Pd(II) g^-1 dry cells. Under suitable hydrodynamic conditions during reduction, two-dimensional nanosheets of Pd metal were formed that were up to several cm in length. Lower dosing of Pd(II) for promoting rapid synthesis of metal coated nanowires and enhanced attachment of cells onto metal surfaces could improve the efficiency of various biotechnological applications such as microbial fuel cells. Formation of biologically stimulated Pd microstructures could lead to a novel way to produce metal scaffolds or nanosheets for a wide variety of applications.

Inhibition of Sulfate Reduction and Cell Division by Desulfovibrio desulfuricans Coated in Palladium Metal

The growth of sulfate-reducing bacteria (SRB) and associated hydrogen sulfide production can be problematic in a range of industries such that inhibition strategies are needed. A range of SRB can reduce metal ions, a strategy that has been utilized for bioremediation, metal recovery, and synthesis of precious metal catalysts. In some instances, the metal remains bound to the cell surface, and the impact of this coating on bacterial cell division and metabolism has not previously been reported. In this study, Desulfovibrio desulfuricans cells (1g dry weight) enabled the reduction of up to 1500 mmol (157.5 g) palladium (Pd) ions, resulting in cells being coated in approximately 1 μm of metal. Thickly coated cells were no longer able to metabolize or divide, ultimately leading to the death of the population. Increasing Pd coating led to prolonged inhibition of sulfate reduction, which ceased completely after cells had been coated with 1200 mmol Pd g^-1dry cells. Less Pd nanoparticle coating permitted cells to carry out sulfate reduction and divide, allowing the population to recover over time as surface-associated Pd diminished. Overcoming inhibition in this way was more rapid using lactate as the electron donor, compared to formate. When using formate as an electron donor, preferential Pd(II) reduction took place in the presence of 100 mM sulfate. The inhibition of important metabolic pathways using a biologically enabled casing in metal highlights a new mechanism for the development of microbial control strategies. IMPORTANCE Microbial reduction of sulfate to hydrogen sulfide is highly undesirable in several industrial settings. Some sulfate-reducing bacteria are also able to transform metal ions in their environment into metal phases that remain attached to their outer cell surface. This study demonstrates the remarkable extent to which Desulfovibrio desulfuricans can be coated with locally generated metal nanoparticles, with individual cells carrying more than 100 times their mass of palladium metal. Moreover, it reveals the effect of metal coating on metabolism and replication for a wide range of metal loadings, with bacteria unable to reduce sulfate to sulfide beyond a specific threshold. These findings present a foundation for a novel means of modulating the activity of sulfate-reducing bacteria.

Overview of microbes based fabricated biogenic nanoparticles for water and wastewater treatment

Treatment of toxic and emerging pollutants (T&EPs) is increasing the threats to the survival of conventional wastewater treatment (WWTs) technologies. The high installation and operational costs of advanced treatment technologies have shifted the research interest to the development of economical and reliable technology for management of T&EPs. Thus, recently biogenic nanoparticles (BNPs) fabricated using microbes/microorganisms are getting tremendous research interest due to their unique properties (i.e. high specific surface area, desired morphology, catalytic reactivity) for the biodegradation and biosorption of T&EPs. In addition, BNPs can be manufactured using metal contaminated water which indicates a hidden potential for resource recovery and utilization. Therefore, the present study discusses the adsorptive and catalytic performance of BNPs in the removal of T&EPs from water (W) and wastewater (WW). In addition, inspired by the superior performance of BNPs in advance WWT, a model of BNPs based WWT resource recovery and utilization process is also proposed. Finally, main issues i.e. mass production, leaching, poisoning/toxicity, regeneration, reusability and fabrication costs and process optimization are discussed which are main hinders in the transfer of BNPs based WWT technologies from laboratory to commercial scale.

The role of sulfate-reducing prokaryotes in the coupling of element biogeochemical cycling

Sulfate-reducing prokaryotes (SRP) represent a diverse group of heterotrophic and autotrophic microorganisms that are ubiquitous in anoxic habitats. In addition to their important role in both sulfur and carbon cycles, SRP are important biotic and abiotic regulators of a variety of sulfur-driven coupled biogeochemical cycling of elements, including: oxygen, nitrogen, chlorine, bromine, iodine and metal(loid)s. SRP gain energy form most of the coupling of element transformation. Once sulfate-reducing conditions are established, sulfide precipitation becomes the predominant abiotic mechanism of metal(loid)s transformation, followed by co-precipitation between metal(loid)s. Anthropogenic contamination, since the industrial revolution, has dramatically disturbed sulfur-driven biogeochemical cycling; making sulfur coupled elements transformation complicated and unpredictable. We hypothesise that sulfur might be detoxication agent for the organic and inorganic toxic compounds, through the metabolic activity of SRP. This review synthesizes the recent advances in the role of SRP in coupled biogeochemical cycling of diverse elements.

Application of urea-agarose gel electrophoresis to select non-redundant 16S rRNAs for taxonomic studies: palladium(II) removal bacteria

The 16S ribosomal RNA (rRNA) gene has been the most commonly used sequence to characterize bacterial communities. The classical approach to obtain gene sequences to study bacterial diversity implies cloning amplicons, selecting clones, and Sanger sequencing cloned fragments. A more recent approach is direct sequencing of millions of genes using massive parallel technologies, allowing a large-scale biodiversity analysis of many samples simultaneously. However, currently, this technique is still expensive when applied to few samples; therefore, the classical approach is still used. Recently, we found a community able to remove 50 mg/L Pd(II). In this work, aiming to identify the bacteria potentially involved in Pd(II) removal, the separation of urea/heat-denatured DNA fragments by urea-agarose gel electrophoresis was applied for the first time to select 16S rRNA-cloned amplicons for taxonomic studies. The major raise in the percentage of bacteria belonging to genus Clostridium sensu stricto from undetected to 21 and 41 %, respectively, for cultures without, with 5 and 50 mg/L Pd(II) accompanying Pd(II) removal point to this taxa as a potential key agent for the bio-recovery of this metal. Despite sulfate-reducing bacteria were not detected, the hypothesis of Pd(II) removal by activity of these bacteria cannot be ruled out because a slight decrease of sulfate concentration of the medium was verified and the formation of PbS precipitates seems to occur. This work also contributes with knowledge about suitable partial 16S rRNA gene regions for taxonomic studies and shows that unidirectional sequencing is enough when Sanger sequencing cloned 16S rRNA genes for taxonomic studies to genus level.

A Post-Genomic View of the Ecophysiology, Catabolism and Biotechnological Relevance of Sulphate-Reducing Prokaryotes

Dissimilatory sulphate reduction is the unifying and defining trait of sulphate-reducing prokaryotes (SRP). In their predominant habitats, sulphate-rich marine sediments, SRP have long been recognized to be major players in the carbon and sulphur cycles. Other, more recently appreciated, ecophysiological roles include activity in the deep biosphere, symbiotic relations, syntrophic associations, human microbiome/health and long-distance electron transfer. SRP include a high diversity of organisms, with large nutritional versatility and broad metabolic capacities, including anaerobic degradation of aromatic compounds and hydrocarbons. Elucidation of novel catabolic capacities as well as progress in the understanding of metabolic and regulatory networks, energy metabolism, evolutionary processes and adaptation to changing environmental conditions has greatly benefited from genomics, functional OMICS approaches and advances in genetic accessibility and biochemical studies. Important biotechnological roles of SRP range from (i) wastewater and off gas treatment, (ii) bioremediation of metals and hydrocarbons and (iii) bioelectrochemistry, to undesired impacts such as (iv) souring in oil reservoirs and other environments, and (v) corrosion of iron and concrete. Here we review recent advances in our understanding of SRPs focusing mainly on works published after 2000. The wealth of publications in this period, covering many diverse areas, is a testimony to the large environmental, biogeochemical and technological relevance of these organisms and how much the field has progressed in these years, although many important questions and applications remain to be explored.

Nickel and platinum group metal nanoparticle production by Desulfovibrio alaskensis G20

Desulfovibrio alaskensis G20 is an anaerobic sulfate reducing bacteria. While Desulfovibrio species have previously been shown to reduce palladium and platinum to the zero-state, forming nanoparticles in the process; there have been no reports that D. alaskensis is able to form these nanoparticles. Metal nanoparticles have properties that make them ideal for use in many industrial and medical applications, such as their size and shape giving them higher catalytic activity than the bulk form of the same metal. Nanoparticles of the platinum group metals in particular are highly sought after for their catalytic ability and herein we report the formation of both palladium and platinum nanoparticles by D. alaskensis and the biotransformation of solvated nickel ions to nanoparticle form.

Microbial community in microbial fuel cell (MFC) medium and effluent enriched with purple photosynthetic bacterium (Rhodopseudomonas sp.)

High power densities have been obtained from MFC reactors having a purple color characteristic of Rhodopseudomonas. We investigated the microbial community structure and population in developed purple MFC medium (DPMM) and MFC effluent (DPME) using 16S rRNA pyrosequencing. In DPMM, dominant bacteria were Comamonas (44.6%), Rhodopseudomonas (19.5%) and Pseudomonas (17.2%). The bacterial community of DPME mainly consisted of bacteria related to Rhodopseudomonas (72.2%). Hydrogen oxidizing bacteria were identified in both purple-colored samples: Hydrogenophaga and Sphaerochaeta in the DPMM, and Arcobacter, unclassified Ignavibacteriaceae, Acinetobacter, Desulfovibrio and Wolinella in the DPME. The methanogenic community of both purple-colored samples was dominated by hydrogenotrophic methanogens including Methanobacterium, Methanobrevibacter and Methanocorpusculum with significantly lower numbers of Methanosarcina. These results suggeste that hydrogen is actively produced by Rhodopseudomonas that leads to the dominance of hydrogen consuming microorganisms in both purple-colored samples. The syntrophic relationship between Rhodopseudomonas and hydrogenotrophic microbes might be important for producing high power density in the acetate-fed MFC under light conditions.

Microbial production and environmental applications of Pd nanoparticles for treatment of halogenated compounds

New biological inspired methods were recently developed to recover precious metals from waste streams and to concomitantly produce palladium nanoparticles on bacteria, that is, bio-Pd. This technology offers a variety of opportunities, as the process can considered to be green, tunable, affordable and scalable. The nanoparticle formation and the specific role of the bacteria in the reclamation process are highlighted. The effective performance of bio-Pd as catalyst in dehalogenation reactions, as well as in hydrogenation, reduction and CC coupling reactions has been extensively described in literature. Especially dehalogenation of environmental contaminants represents a promising market for application of bio-Pd. Therefore, several treatment technologies based on bio-Pd in the different environmental compartments are considered and domains, in which bio-Pd can be used at full scale are described. Finally, the perspectives for implementation of the bio-Pd technology in the future are set forward.

Bio-palladium: from metal recovery to catalytic applications

While precious metals are available to a very limited extent, there is an increasing demand to use them as catalyst. This is also true for palladium (Pd) catalysts and their sustainable recycling and production are required. Since Pd catalysts exist nowadays mostly under the form of nanoparticles, these particles need to be produced in an environment-friendly way. Biological synthesis of Pd nanoparticles ('bio-Pd') is an innovative method for both metal recovery and nanocatalyst synthesis. This review will discuss the different bio-Pd precipitating microorganisms, the applications of the catalyst (both for environmental purposes and in organic chemistry) and the state of the art of the reactors based on the bio-Pd concept. In addition, some main challenges are discussed, which need to be overcome in order to create a sustainable nanocatalyst. Finally, some outlooks for bio-Pd in environmental technology are presented.

Palladium nanoparticles produced by fermentatively cultivated bacteria as catalyst for diatrizoate removal with biogenic hydrogen

A new biological inspired method to produce nanopalladium is the precipitation of Pd on a bacterium, i.e., bio-Pd. This bio-Pd can be applied as catalyst in dehalogenation reactions. However, large amounts of hydrogen are required as electron donor in these reactions resulting in considerable costs. This study demonstrates how bacteria, cultivated under fermentative conditions, can be used to reductively precipitate bio-Pd catalysts and generate the electron donor hydrogen. In this way, one could avoid the costs coupled to hydrogen supply. The catalytic activities of Pd(0) nanoparticles produced by different strains of bacteria (bio-Pd) cultivated under fermentative conditions were compared in terms of their ability to dehalogenate the recalcitrant aqueous pollutants diatrizoate and trichloroethylene. While all of the fermentative bio-Pd preparations followed first order kinetics in the dehalogenation of diatrizoate, the catalytic activity differed systematically according to hydrogen production and starting Pd(II) concentration in solution. Batch reactors with nanoparticles formed by Citrobacter braakii showed the highest diatrizoate dehalogenation activity with first order constants of 0.45 ± 0.02 h⁻¹ and 5.58 ± 0.6 h⁻¹ in batches with initial concentrations of 10 and 50 mg L⁻¹ Pd, respectively. Nanoparticles on C. braakii, used in a membrane bioreactor treating influent containing 20 mg L⁻¹ diatrizoate, were capable of dehalogenating 22 mg diatrizoate mg⁻¹ Pd over a period of 19 days before bio-Pd catalytic activity was exhausted. This study demonstrates the possibility to use the combination of Pd(II), a carbon source and bacteria under fermentative conditions for the abatement of environmental halogenated contaminants.

Biorecovery of Precious Metals from Wastes and Conversion into Fuel Cell Catalyst for Electricity Production

Bio-manufacturing of nano-scale palladium was achieved using bacterial cells. Highly active Pd-catalyst (Bio-Pd) produced by an E. coli mutant gave power output in a fuel cell. Up to ~115% of the maximum power generation was achieved by electrodes of Bio-Pd catalysts from Escherichia coli, compared to that from a commercial-Pd electrode (~0.099 W). A bio-precious-metals (Bio-PM) catalyst made directly from an industrial reprocessing solution by the E. coli was also made into fuel cell electrodes and ~0.06W of maximum power generation was observed.

Biorecovery of Platinum Group Metals from Secondary Sources

Since 1998 demand for the platinum group metals (PGM) has exceeded supply resulting in large price increases. Undersupply, combined with rising costs prompts environmentally friendly recycling technologies. Leachates containing PGM were produced from secondary waste sources using microwave leaching technology with the aim of recovering precious metals using bacterial biomass. Previous studies showed that metallised biomass exhibits catalytic activity; hence metal is not only recovered but can be converted into a valuable product. Cells of Escherichia coli MC4100 that had been pre-metallised with Pt were more effective at reducing PGM from the leachates. The solid recovered from the leachate onto the bacteria was characterised using X-ray Powder Diffraction (XRD) and Energy Dispersive X-ray Microanalysis (EDX). Metallised biomass was tested for catalytic activity (reduction of Cr(VI) to Cr(III)) to compare the ‘quality’ of polymetallic bacterial-based catalysts versus counterparts made from single and mixed metal model solutions.

Electro-biosorptive accumulation for use in enhanced detection of fluorogenic tracers and the removal of toxic entities from dilute solutions

An accumulating process based on electric field-assisted biosorption is described to facilitate the accumulation and enhanced detection of organic fluorogenic marker species in aqueous solution. Fluorescein was detected at concentrations as low as 0.6 microg l(-1). Using a mammalian cell-based bioassay, we demonstrate the use of the system to remove the toxic effects of species such as ethidium bromide and doxorubicin from complex solutions such as tissue culture medium. The use of such a system for the detection and removal of trace contaminants is discussed.

Pt-based electro-catalytic materials derived from biosorption processes and their exploitation in fuel cell technology

Yeast-based biomass, immobilised in polyvinyl alcohol (PVA) cryogels, was used as a biosorbant material for the recovery of platinum (PtCl (6) (2-) ) from aqueous solutions. The resulting biomass-Pt matrices were then employed directly as an electro-catalytic anode in a fuel cell configuration to generate electrical energy from renewable sources such as glucose and ethanol. We suggest an integrated strategy incorporating the derivation of a high-value product from a bioremediative process with a view towards producing energy from renewable fuels such as glucose and ethanol.

Biorecovered precious metals from industrial wastes: single-step conversion of a mixed metal liquid waste to a bioinorganic catalyst with environmental application

The complete and continuous reduction of 1 mM Cr(VI) to Cr(III) was achieved in a flow-through reactor using a novel bioinorganic catalyst ("MM-bio-Pd(0)"), which was produced by single-step reduction of platinum group metals (PGM) from industrial waste solution onto biomass of Desulfovibrio desulfuricans ATCC 29577. Two flow-through reactor systems were compared using both "MM-bioPd(0)" and chemically reduced Pd(0). Reactors containing the latter removed Cr(VI) for 1 week only at the expense of formate as the electron donor, whereas the former gave complete Cr(VI) removal for 3 months of continuous operation. Mass balance analysis showed 100% reduction of Cr(VI) to soluble Cr(III) in the bioreactor exit solution. With the use of electron paramagnetic resonance (EPR) no intermediate Cr(V) species could be detected. Pd(0) was biodeposited similarly using Escherichia coliMC4100 and "bio-Pd(0)". The latter was used to recover Pd(II) from two acidic industrial waste leachates to generate two types of "MM-bio-Pd(0)": "SI-bio-Pd(0)" and "SII-bio-Pd(0)", respectively. The biomaterial composition was comparable in both cases, and the catalytic activity was related inversely to the amount of chloride in the waste leachate from which it was derived.

Microorganisms in inorganic chemical analysis

There are innumerable strains of microbes (bacteria, yeast and fungi) that degrade or transform chemicals and compounds into simpler, safer or less toxic substances. These bioprocesses have been used for centuries in the treatment of municipal wastes, in wine, cheese and bread making, and in bioleaching and metal recovery processes. Recent literature shows that microorganisms can be also used as effective sorbents for solid phase extraction procedures. This review reveals that fundamental nonanalytical studies on the parameters and conditions of biosorption processes and on metal-biomass interactions often result in efficient analytical procedures and biotechnological applications. Some selected examples illustrate the latest developments in the biosorption of metals by microbial biomass, which have opened the door to the application of microorganisms to analyte preconcentration, matrix separation and speciation analysis.

Dehalogenation of chlorinated aromatic compounds using a hybrid bioinorganic catalyst on cells of Desulfovibrio desulfuricans

A novel bioinorganic catalyst was obtained via reduction of Pd(II) to Pd0 on to the surface of cells of Desulfovibrio desulfuricans at the expense of H2. Palladised biomass, supplied with formate or H2 as an electron donor, catalysed the dehalogenation of 2-chlorophenol and polychlorinated biphenyls. In the example of 2,3,4,5-tetrachlorobiphenyl, the bioinorganic catalyst promoted a rate of chloride release of 9.33 +/- 0.17 nmol min(-1) mg (-1) and only approximately 5% of this value was obtained using chemically reduced or commercially available Pd0. In the case of 2,2',4,4',6,6'-hexachlorobiphenyl the rate was more than four orders of magnitude faster than the degradation reported using a sulfidogenic culture. Negligible chloride release occurred from any of the chloroaromatic compounds using biomass alone, or from palladised biomass challenged with hexane carrier solvent only. Analysis of the spent solution showed that in addition to catalysis of reductive dehalogenation the new material was able to remove very effectively the organic residua, with neither any PCB nor any breakdown products identifiable by GC/MS.

Reduction of Cr(VI) by ?palladized? biomass ofDesulfovibrio desulfuricans ATCC 29577

A novel catalytic activity of palladium [Pd(0)]-coated cells of Desulfovibrio desulfuricans ATCC 29577 ["bio-Pd(0)"] is demonstrated. Reduction of 700 microM Cr(VI) occurred within 24 h using formate (25 mM) or hydrogen (1 atm) as the electron donor, under conditions whereby cells lacking bound Pd(0), or palladium metal manufactured via chemical reduction of soluble Pd(II), did not reduce Cr(VI). The biomass-bound Pd(0) also functioned in the continuous removal of 400 microM Cr(VI) from a 1 mM solution under H(2) (flow residence time approximately 5 h), where chemically prepared Pd(0) was ineffective. This demonstrates a new type of active bioinorganic catalysis, whereby the presence of biomass bound to Pd(0) confers a novel catalytic capability not seen with Pd base metal or biomass alone.

Microbial reduction of metals and radionuclides

The microbial reduction of metals has attracted recent interest as these transformations can play crucial roles in the cycling of both inorganic and organic species in a range of environments and, if harnessed, may offer the basis for a wide range of innovative biotechnological processes. Under certain conditions, however, microbial metal reduction can also mobilise toxic metals with potentially calamitous effects on human health. This review focuses on recent research on the reduction of a wide range of metals including Fe(III), Mn(IV) and other more toxic metals such as Cr(VI), Hg(II), Co(III), Pd(II), Au(III), Ag(I), Mo(VI) and V(V). The reduction of metalloids including As(V) and Se(VI) and radionuclides including U(VI), Np(V) and Tc(VII) is also reviewed. Rapid advances over the last decade have resulted in a detailed understanding of some of these transformations at a molecular level. Where known, the mechanisms of metal reduction are discussed, alongside the environmental impact of such transformations and possible biotechnological applications that could utilise these activities.

A novel electrobiotechnology for the recovery of precious metals from spent automotive catalysts

Platinum group metals are routinely used in automotive catalysts but recycle technology lags behind demand. There is no available 'dean technology' and leach solutions (e.g. aqua regia) to solubilise the metals from scrap are highly aggressive. A microwave-assisted leaching method was developed which gave 80% metals recovery, with the leach time reduced from 2 h to 15 min using 50% (aq.) diluted aqua regia to give potentially a more biocompatible leachate. Desulfovibrio desulfuricans reduces soluble platinum group metals to cell-bound insoluble base metals (e.g. Pd(II) --> Pd(0)). For use, biofilm was immobilised on a Pd-23% Ag solid alloy membrane which delivered H. to the cells via an electrochemical chamber at the back-side. The biomass-coated Pd-Ag alloy electrode was used in a flow-through reactor for recovery of Pd, Pt and Rh from aqua regia leachates (pH 2.5) of spent automotive catalysts with up to 90% efficiency at a flow residence time of 15 minutes. Free cells did not reduce platinum group metals from the leachates but the electrobioreactor did so using biofilm-cells pre-loaded with Pd(0). Reactors lacking biomass or reactors with heat-killed biofilm removed less platinum group metals, via electrochemically-synthesised H. reductant alone. The use of an active biofilm layer in a flow-through electrobioreactor provides a simple, dean and rapid potential recycle technology.

Bioreduction and biocrystallization of palladium by Desulfovibrio desulfuricans NCIMB 8307

The reduction of Pd(II) to Pd(0) was accelerated by using the sulfate-reducing bacterium Desulfovibrio desulfuricans NCIMB 8307 at the expense of formate or H(2) as electron donors at pH 2-7. With formate no reduction occurred at pH 2, but with H(2) 50% of the activity was retained at pH 2, with the maximum rate (1.3-1.4 micromol min(-1) mg dry cells(-1)) seen at pH 3-7, which was similar to the rate with formate at neutral pH. Excess nitrate was inhibitory to Pd(II) reduction using formate, but not H(2). Chloride ion was inhibitory as low as 100 mM using formate but with H(2) only ca. 25% inhibition was observed at 500 mM Cl(-) and H(2) was concluded to be the electron donor of choice for the potential remediation of industrial wastes. Deposited Pd was visible on the cells using transmission and scanning electron microscopy and analysis by energy dispersive X-ray microanalysis (EDAX) identified the deposit as Pd, confirmed as Pd(0) by X-ray powder diffraction analysis (XRD). The crystal size of the biodeposited Pd(0) was determined to be only 50% of the size of Pd(0) crystals manufactured chemically from Pd(II) at the expense of H(2) and, unlike the chemically manufactured material, the biocrystal size was independent of the pH. The "biological" Pd(0) functioned as a superior chemical catalyst in a test reaction which liberated hydrogen from hypophosphite. Pd, and also Pt and Rh, could be recovered by resting cell suspensions under H(2) from an industrial processing wastewater, suggesting a possible future application of bioprocessing technology for precious metals.

Bioreduction and biocrystallization of palladium by Desulfovibrio desulfuricans NCIMB 8307

The reduction of Pd(II) to Pd(0) was accelerated by using the sulfate-reducing bacterium Desulfovibrio desulfuricans NCIMB 8307 at the expense of formate or H(2) as electron donors at pH 2-7. With formate no reduction occurred at pH 2, but with H(2) 50% of the activity was retained at pH 2, with the maximum rate (1.3-1.4 micromol min(-1) mg dry cells(-1)) seen at pH 3-7, which was similar to the rate with formate at neutral pH. Excess nitrate was inhibitory to Pd(II) reduction using formate, but not H(2). Chloride ion was inhibitory as low as 100 mM using formate but with H(2) only ca. 25% inhibition was observed at 500 mM Cl(-) and H(2) was concluded to be the electron donor of choice for the potential remediation of industrial wastes. Deposited Pd was visible on the cells using transmission and scanning electron microscopy and analysis by energy dispersive X-ray microanalysis (EDAX) identified the deposit as Pd, confirmed as Pd(0) by X-ray powder diffraction analysis (XRD). The crystal size of the biodeposited Pd(0) was determined to be only 50% of the size of Pd(0) crystals manufactured chemically from Pd(II) at the expense of H(2) and, unlike the chemically manufactured material, the biocrystal size was independent of the pH. The "biological" Pd(0) functioned as a superior chemical catalyst in a test reaction which liberated hydrogen from hypophosphite. Pd, and also Pt and Rh, could be recovered by resting cell suspensions under H(2) from an industrial processing wastewater, suggesting a possible future application of bioprocessing technology for precious metals.