Convergent synthesis of diversified reversible network leads to liquid metal-containing conductive hydrogel adhesives

A strong hydrogen bond bridging interface based on tannic acid for improving the performance of high-filled bamboo fibers/poly (butylene succinate-co-butylene adipate) (PBSA)biocomposites

Natural plant fiber-reinforced bio-based polymer composites are widely attracting attention because of their economical, readily available, low carbon, and biodegradable, and showing promise in gradually replacing petroleum-based composites. Nevertheless, the fragile interfacial bonding between fiber and substrate hinders the progression of low-cost and abundant sustainable high-performance biocomposites. In this paper, a novel high-performance sustainable biocomposite was built by introducing a high density strong hydrogen-bonded bridging interface based on tannic acid (TA) between bamboo fibers (BFs) and PBSA. Through comprehensive analysis, this strategy endowed the biocomposites with better mechanical properties, thermal stability, dynamic thermo-mechanical properties and water resistance. The optimum performance of the composites was achieved when the TA concentration was 2 g/L. Tensile strength as well as modulus, flexural strength as well as modulus, and impact strength improved by 22 %, 10 %, 15 %, 35 %, and 25 % respectively. Additionally, the initial degradation temperature(Tonset) and maximum degradation temperature(Tmax) increased by 12.07 °C and 14.8 °C respectively. The maximum storage modulus(E'), room temperature E', and loss modulus(E")elevated by 199 %, 75 %, and 181 % respectively. Moreover, the water absorption rate decreased by 59 %. The strong hydrogen-bonded bridging interface serves as a novel model and theory for biocomposite interface engineering. At the same time, it offers a promising future for the development of high performance sustainable biocomposites with low cost and abundant biomass resources and contributes to their wide application in aerospace, automotive, biomedical and other field.

Recent advances and progress on the design, fabrication and biomedical applications of Gallium liquid metals-based functional materials

Gallium (Ga) is a well-known liquid metals (LMs) that possesses the features, such as fluidity, low viscosity, high electrical and thermal conductivity, and relative low toxicity. Owing to the weak interactions between Ga atoms, Ga LMs can be adopted for fabrication of various Ga LMs-based functional materials via ultrasonic treatment and mechanical grinding. Moreover, many organic compounds/polymers can be coated on the surface of LMs-based materials through coordination between oxidized outlayers of Ga LMs and functional groups of organic components. Over the past decades, different strategies have been reported for synthesizing Ga LMs-based functional materials and their biomedical applications have been intensively investigated. Although some review articles have published over the past few years, a concise review is still needed to advance the latest developments in biomedical fields. The main context can be majorly divided into two parts. In the first section, various strategies for fabrication of Ga LMs-based functional materials via top-down strategies were introduced and discussed. Following that, biomedical applications of Ga LMs-based functional materials were summarized and design Ga LMs-based functional materials with enhanced performance for cancer photothermal therapy (PTT) and PTT combined therapy were highlighted. We trust this review article will be beneficial for scientists to comprehend this promising field and greatly advance future development for fabrication of other Ga LMs-based functional materials with better performance for biomedical applications.

Low-impedance tissue-device interface using homogeneously conductive hydrogels chemically bonded to stretchable bioelectronics

Stretchable bioelectronics has notably contributed to the advancement of continuous health monitoring and point-of-care type health care. However, microscale nonconformal contact and locally dehydrated interface limit performance, especially in dynamic environments. Therefore, hydrogels can be a promising interfacial material for the stretchable bioelectronics due to their unique advantages including tissue-like softness, water-rich property, and biocompatibility. However, there are still practical challenges in terms of their electrical performance, material homogeneity, and monolithic integration with stretchable devices. Here, we report the synthesis of a homogeneously conductive polyacrylamide hydrogel with an exceptionally low impedance (~21 ohms) and a reasonably high conductivity (~24 S/cm) by incorporating polyaniline-decorated poly(3,4-ethylenedioxythiophene:polystyrene). We also establish robust adhesion (interfacial toughness: ~296.7 J/m2) and reliable integration between the conductive hydrogel and the stretchable device through on-device polymerization as well as covalent and hydrogen bonding. These strategies enable the fabrication of a stretchable multichannel sensor array for the high-quality on-skin impedance and pH measurements under in vitro and in vivo circumstances.

Mussel-inspired resilient hydrogels with strong skin adhesion and high-sensitivity for wearable device

Stretchable and self-adhesive conductive hydrogels hold significant importance across a wide spectrum of applications, including human-machine interfaces, wearable devices, and soft robotics. However, integrating multiple properties, such as high stretchability, strong interfacial adhesion, self-healing capability, and sensitivity, into a single material poses significant technical challenges. Herein, we present a multifunctional conductive hydrogel based on poly(acrylic acid) (PAA), dopamine-functionalized pectin (PT-DA), polydopamine-coated reduction graphene oxide (rGO-PDA), and Fe3+ as an ionic cross-linker. This hydrogel exhibits a combination of high stretchability (2000%), rapid self-healing (~ 94% recovery in 5 s), and robust self-adhesion to various substrates. Notably, the hydrogel demonstrates a remarkable skin adhesion strength of 85 kPa, surpassing previous skin adhesive hydrogels. Furthermore, incorporating rGO within the hydrogel network creates electric pathways, ensuring excellent conductivity (0.56 S m-1). Consequently, these conductive hydrogels exhibit strain-sensing properties with a significant increase in gauge factor (GF) of 14.6, covering an extensive detection range of ~ 1000%, fast response (198 ms) and exceptional cycle stability. These multifunctional hydrogels can be seamlessly integrated into motion detection sensors capable of distinguishing between various strong or subtle movements of the human body.

Liquid Metal Nanoparticles Physically Hybridized with Cellulose Nanocrystals Initiate and Toughen Hydrogels with Piezoionic Properties

Liquid metal (LM) particles can serve as initiators, functional fillers, and cross-linkers for hydrogels. Herein, we show that cellulose nanocrystals (CNCs) stabilize LM particles in aqueous solutions, such as those used to produce hydrogels. The CNC-coated LM particles initiate free-radical polymerization to form poly(acrylic acid) (PAA) hydrogel with exceptional properties─stretchability ∼2000%, excellent toughness ∼1.8 MJ/m3, mechanical resilience, and efficient self-healing─relative to cross-linked PAA networks polymerized using conventional molecular initiators. FTIR spectroscopy, rheology, and mechanical measurements suggest that physical bonds between PAA and both Ga3+ and LM-CNC particles contribute to the excellent mechanical properties. The gels are used to sense a wide range of strains, such as those associated with human motion, via changes in resistance through the gel. The sensitivity at low strains enables monitoring subtle physiological signals, such as pulse. Without significantly compromising the toughness, soaking the gels in salt solution brings about high ionic conductivity (3.8 S/m), enabling them to detect touch via piezoionic principles; the anions in the gel have higher mobility than cations, resulting in significant charge separation (current ∼30 μA, ∼10 μA/cm2) through the gel in response to touch. These attractive properties are promising for wearable sensors, energy harvesters, and self-powered ionic touch panels.

High-Performance Hydrogel Sensors Enabled Multimodal and Accurate Human-Machine Interaction System for Active Rehabilitation

Human-machine interaction (HMI) technology shows an important application prospect in rehabilitation medicine, but it is greatly limited by the unsatisfactory recognition accuracy and wearing comfort. Here, this work develops a fully flexible, conformable, and functionalized multimodal HMI interface consisting of hydrogel-based sensors and a self-designed flexible printed circuit board. Thanks to the component regulation and structural design of the hydrogel, both electromyogram (EMG) and forcemyography (FMG) signals can be collected accurately and stably, so that they are later decoded with the assistance of artificial intelligence (AI). Compared with traditional multichannel EMG signals, the multimodal human-machine interaction method based on the combination of EMG and FMG signals significantly improves the efficiency of human-machine interaction by increasing the information entropy of the interaction signals. The decoding accuracy of the interaction signals from only two channels for different gestures reaches 91.28%. The resulting AI-powered active rehabilitation system can control a pneumatic robotic glove to assist stroke patients in completing movements according to the recognized human motion intention. Moreover, this HMI interface is further generalized and applied to other remote sensing platforms, such as manipulators, intelligent cars, and drones, paving the way for the design of future intelligent robot systems.

Recent Advances and Developments in Injectable Conductive Polymer Gels for Bioelectronics

Soft matter bioelectronics represents an emerging and interdisciplinary research frontier aiming to harness the synergy between biology and electronics for advanced diagnostic and healthcare applications. In this context, a whole family of soft gels have been recently developed with self-healing ability and tunable biological mimetic features to act as a tissue-like space bridging the interface between the electronic device and dynamic biological fluids and body tissues. This review article provides a comprehensive overview of electroactive polymer gels, formed by noncovalent intermolecular interactions and dynamic covalent bonds, as injectable electroactive gels, covering their synthesis, characterization, and applications. First, hydrogels crafted from conducting polymers (poly(3,4-ethylene-dioxythiophene) (PEDOT), polyaniline (PANi), and polypyrrole (PPy))-based networks which are connected through physical interactions (e.g., hydrogen bonding, π-π stacking, hydrophobic interactions) or dynamic covalent bonds (e.g., imine bonds, Schiff-base, borate ester bonds) are addressed. Injectable hydrogels involving hybrid networks of polymers with conductive nanomaterials (i.e., graphene oxide, carbon nanotubes, metallic nanoparticles, etc.) are also discussed. Besides, it also delves into recent advancements in injectable ionic liquid-integrated gels (iongels) and deep eutectic solvent-integrated gels (eutectogels), which present promising avenues for future research. Finally, the current applications and future prospects of injectable electroactive polymer gels in cutting-edge bioelectronic applications ranging from tissue engineering to biosensing are outlined.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Liquid metal-hydrogel composites for flexible electronics

As an emerging functional material, liquid metal-hydrogel composites exhibit excellent biosafety, high electrical conductivity, tunable mechanical properties and good adhesion, thus providing a unique platform for a wide range of flexible electronics applications such as wearable devices, medical devices, actuators, and energy conversion devices. Through different composite methods, liquid metals can be integrated into hydrogel matrices to form multifunctional composite material systems, which further expands the application range of hydrogels. In this paper, we provide a brief overview of the two materials: hydrogels and liquid metals, and discuss the synthesis method of liquid metal-hydrogel composites, focusing on the improvement of the performance of hydrogel materials by liquid metals. In addition, we summarize the research progress of liquid metal-hydrogel composites in the field of flexible electronics, pointing out the current challenges and future prospects of this material.

Enhanced Mechanical Strength of Metal Ion-Doped MXene-Based Double-Network Hydrogels for Highly Sensitive and Durable Flexible Sensors

Development of conductive hydrogels with high sensitivity and excellent mechanical properties remains a challenge for constructing flexible sensor devices. Herein, a universal strategy is presented for enhancing the mechanical strength of Mxene-based double-network hydrogels through metal ion coordination effects. Polyacrylamide (PAM)/sodium alginate (SA)/Mxene double-network (PSM-DN) hydrogels were prepared by metal ion impregnation of PAM/SA/Mxene (PSM) hydrogels. High electrical conductivity is achieved due to MXene nanosheets, while the strong coordination bond between metal ions and SA constructs a second network that increases the mechanical strength of the hydrogel by an order of magnitude. Mechanical tests demonstrated that the elastic modulus of hydrogels matches that of human tissues. Hence, they can be used as a highly sensitive electronic skin sensor to recognize the movement of different joints in humans and also as a pressure sensing interface to recognize characters for anticounterfeiting and information transfer. This work can promote the practical application of conductive hydrogels in high-tech fields, such as flexible electronic skin and interface interaction.

Recent advances in 3D printable conductive hydrogel inks for neural engineering

Recently, the 3D printing of conductive hydrogels has undergone remarkable advances in the fabrication of complex and functional structures. In the field of neural engineering, an increasing number of reports have been published on tissue engineering and bioelectronic approaches over the last few years. The convergence of 3D printing methods and electrically conducting hydrogels may create new clinical and therapeutic possibilities for precision regenerative medicine and implants. In this review, we summarize (i) advancements in preparation strategies for conductive materials, (ii) various printing techniques enabling the fabrication of electroconductive hydrogels, (iii) the required physicochemical properties of the printed constructs, (iv) their applications in bioelectronics and tissue regeneration for neural engineering, and (v) unconventional approaches and outlooks for the 3D printing of conductive hydrogels. This review provides technical insights into 3D printable conductive hydrogels and encompasses recent developments, specifically over the last few years of research in the neural engineering field.

Recent progress in liquid metal printing and its applications

This paper focuses on the latest research printing technology and broad application for flexible liquid metal (LM) materials. Through the newest template printing method, centrifugal force assisted method, pen lithography technology, and laser method, the precision of liquid metal printing on the devices was improved to 10 nm. The development of novel liquid metal inks, such as PVA-LM ink and ethanol/PDMS/LM double emulsion ink, have further enhanced the recovery, rapid printing, high conductivity, and strain resistance. At the same time, liquid metals also show promise in the application of biochemical sensors, photocatalysts, composite materials, driving machines, and electrode materials. Liquid metals have been applied to biomedical, pressure/gas, and electrochemical sensors. The sensitivity, biostability, and electrochemical performance of these LM sensors were improved rapidly. They could continue to be used in healthy respiratory, heartbeat monitoring, and dopamine detection. Meanwhile, the applications of liquid metal droplets in catalytic-assisted MoS2 deposition, catalytic growth of two-dimensional (2D) lamellar, catalytic free radical polymerization, catalytic hydrogen absorption/dehydrogenation, photo/electrocatalysis, and other fields were also summarized. Through improving liquid metal composites, magnetic, thermal, electrical, and tensile enhancement alloys, and shape memory alloys with excellent properties could also be prepared. Finally, the applications of liquid metal in micro-motors, intelligent robot feet, nanorobots, self-actuation, and electrode materials were also summarized. This paper comprehensively summarizes the practical application of liquid metals in different fields, which helps understand LMs development trends, and lays a foundation for subsequent research.

Ultra-robust, high-adhesive, self-healing, and photothermal zwitterionic hydrogels for multi-sensory applications and solar-driven evaporation

Zwitterionic hydrogels have received considerable attention owing to their characteristic structures and integrating multifunctionality. However, the superhydrophilicity-induced poor mechanical properties severely hinder their potential applications. Besides, from the perspective of wide applications, zwitterionic hydrogels with integrated high mechanical properties, conductivity and multifunctionalities including self-adhesive, self-healing, and photothermal properties are highly desirable yet challenging. Herein, a new class of high-performance and multifunctional zwitterionic hydrogels are designed based on the incorporation of polydopamine-coated liquid metal nanoparticles (LM@PDA). Due to the efficient energy dissipation endowed by the isotropically extensible deformation of LM@PDA and the multiple interactions within the hydrogel matrix, the resultant hydrogels exhibited ultrahigh robustness with tensile strength of up to 1.3 MPa, strain of up to 1555% and toughness of up to 7.3 MJ m-3, superior or comparable to those of most zwitterionic hydrogels. The introduced LM@PDA also endows the hydrogels with high conductivity, versatile adhesion, autonomous self-healing, excellent injectability, three-dimensional printability, degradability, and photothermal conversion performance. These preferable properties enable the hydrogels promising as wearable sensors with multiple sensory capabilities for a wide range of strain values (1-500%), pressures (0.5-200 kPa) and temperatures (20-80 °C) with an impressive temperature coefficient of resistance (up to 0.15 °C-1). Moreover, these hydrogels can be also applied as solar evaporators with a high water evaporation rate (up to 2.42 kg m-2 h-1) and solar-thermal conversion efficiency (up to 90.3%) for solar desalination and wastewater purification. The present work can pave the way for the future development of zwitterionic hydrogels and beyond.

Gallium Liquid Metal: Nanotoolbox for Antimicrobial Applications

The proliferation of drug resistance in microbial pathogens poses a significant threat to human health. Hence, treatment measures are essential to surmount this growing problem. In this context, liquid metal nanoparticles are promising. Gallium, a post-transition metal notable for being a liquid at physiological temperature, has drawn attention for its distinctive properties, high antimicrobial efficacy, and low toxicity. Moreover, gallium nanoparticles demonstrate anti-inflammatory properties in immune cells. Gallium can alloy with other metals and be prepared in various composites to modify and tailor its characteristics and functionality. More importantly, the bactericidal mechanism of gallium liquid metal could sidestep the threat of emerging drug resistance mechanisms. Building on this rationale, gallium-based liquid metal nanoparticles can enable impactful and innovative strategic pathways in the battle against antimicrobial resistance. This review outlines the characteristics of gallium-based liquid metals at the nanoscale and their corresponding antimicrobial mechanisms to provide a comprehensive yet succinct overview of their current antimicrobial applications. In addition, challenges and opportunities that require further research efforts have been identified and discussed.

Current Progress in Gallium-based Liquid Metals for Combinatory Phototherapeutic Anticancer Applications

A variety of therapeutic approaches using liquid metal (LM) have been intensively investigated, due to its unique physico-chemical properties that include high surface tension, fluidity, shape deformability, thermal conductivity, and electrical conductivity. Among a series of LMs, the relatively lower toxicity and minimal volatility of gallium (Ga)-based LMs (GaLMs) enables their usage in a series of potential biomedical applications, especially implantable platforms, to treat multiple diseases. In addition, the highly efficient conversion of light energy into thermal or chemical energy via GaLMs has led to recent developments in photothermal and photodynamic applications for anticancer treatments. As attractive photothermal agents or photosensitizers, a systematic interpretation of the structural characteristics and photo-responsive behaviors of GaLMs is necessary to develop effective anticancer engineering applications. Therefore, the aim of this review is to provide a comprehensive summary of currently suggested GaLM-mediated photo-therapeutic cancer treatments. In particular, the review summarizes (1) surface coating techniques to form stable and multifunctional GaLM particulates, (2) currently investigated GaLM-mediated photothermal and photodynamic anticancer therapies, (3) synergistic efficacies with the aid of additional interventions, and (4) 3D composite gels embedded with GaLMs particles, to convey the potential technological advances of LM in this field.

A self-assembled dynamic extracellular matrix-like hydrogel system with multi-scale structures for cell bioengineering applications

Extracellular matrix (ECM) provides various types of direct interactions with cells and a dynamic environment, which can be remodeled through different assembly/degradation mechanisms to adapt to different biological processes. Herein, through introducing polyphosphate-modified hyaluronic acid and bioactive glass (BG) nano-fibril into a self-assembled hydrogel system with peptide-polymer conjugate, we can realize many new ECM-like functions in a synthetic polymer network. The hydrogel network formation is mediated by coacervation, followed by a gradual transition of peptide structure from  α-helix to β-sheet. The ECM-like hydrogels can be degraded through a number of orthogonal mechanisms, including treatments with protease, hyaluronidase, alkaline phosphatase, and calcium ion. As 2D coating, the ECM-like hydrogels can be used to modify the planar surface to promote the adhesion of mesenchymal stromal cells, or to coat the cell surface in a layer-by-layer fashion to shield the interaction with the substrate. As ECM-like hydrogels for 3D cell culture, the system is compatible with injection and cell encapsulation. Upon incorporating fragmented electrospun bioactive glass nano-fibril into the hydrogels, the synergetic effects of soft hydrogel and stiff reinforcement nanofibers on recapitulating ECM functions result in reduced cell circularity in 3D. Finally, by injecting the ECM-like hydrogels into mice, gradual degradations over a time period of one month and high biocompatibility have been shown in vivo. The contribution of complex network dynamics and hierarchical structures to cell-biomatrix interaction can be investigated multi-dimensionally, as many mechanisms are orthogonal to each other and can be regulated individually. STATEMENT OF SIGNIFICANCE: A list of native ECM features has attracted the most interest and attention in the research of synthetic biomaterials. In this research, we have described a simple ECM-like hydrogel system in which the complex and elegant functions of native ECM can be recapitulated in a chemically defined synthetic system. The ECM-like hydrogel systems were developed to avoid undesired features of biological substances (e.g., ethical concerns, batch-to-batch variation, immunogenicity, and potential risk of contamination), as well as gaining new functions to facilitate bioengineering applications (e.g., 3D cell culture, injection, and high stability). To this end, we have developed an ECM-like hydrogel system and provide evidence that this purely synthetic biomaterial is a promising candidate for cell bioengineering applications.

3D Printable Self-Adhesive and Self-Healing Ionotronic Hydrogels for Wearable Healthcare Devices

Ionotronic hydrogels have attracted significant attention in emerging fields such as wearable devices, flexible electronics, and energy devices. To date, the design of multifunctional ionotronic hydrogels with strong interfacial adhesion, rapid self-healing, three-dimensional (3D) printing processability, and high conductivity are key requirements for future wearable devices. Herein, we report the rational design and facile synthesis of 3D printable, self-adhesive, self-healing, and conductive ionotronic hydrogels based on the synergistic dual reversible interactions of poly(vinyl alcohol), borax, pectin, and tannic acid. Multifunctional ionotronic hydrogels exhibit strong adhesion to various substrates with different roughness and chemical components, including porcine skin, glass, nitrile gloves, and plastics (normal adhesion strength of 55 kPa on the skin). In addition, the ionotronic hydrogels exhibit intrinsic ionic conductivity imparting strain-sensing properties with a gauge factor of 2.5 up to a wide detection range of approximately 2000%, as well as improved self-healing behavior. Based on these multifunctional properties, we further demonstrate the use of ionotronic hydrogels in the 3D printing process for implementing complex patterns as wearable strain sensors for human motion detection. This study is expected to provide a new avenue for the design of multifunctional ionotronic hydrogels, enabling their potential applications in wearable healthcare devices.

Liquid metal enabled conformal electronics

The application of three-dimensional common electronics that can be directly pasted on arbitrary surfaces in the fields of human health monitoring, intelligent robots and wearable electronic devices has aroused people's interest, especially in achieving stable adhesion of electronic devices on biological dynamic three-dimensional interfaces and high-quality signal acquisition. In recent years, liquid metal (LM) materials have been widely used in the manufacture of flexible sensors and wearable electronic devices because of their excellent tensile properties and electrical conductivity at room temperature. In addition, LM has good biocompatibility and can be used in a variety of biomedical applications. Here, the recent development of LM flexible electronic printing methods for the fabrication of three-dimensional conformal electronic devices on the surface of human tissue is discussed. These printing methods attach LM to the deformable substrate in the form of bulk or micro-nano particles, so that electronic devices can adapt to the deformation of human tissue and other three-dimensional surfaces, and maintain stable electrical properties. Representative examples of applications such as self-healing devices, degradable devices, flexible hybrid electronic devices, variable stiffness devices and multi-layer large area circuits are reviewed. The current challenges and prospects for further development are also discussed.

Hyaluronic acid and chitosan-based injectable and self-healing hydrogel with inherent antibacterial and antioxidant bioactivities

Injectable dressings offering intrinsic antibacterial activity and antioxidation are required, because persistent bacterial infection and oxidative damage are common issues associated with chronic non-healing wounds. Herein, a versatile QCS-l-TA-l-OHA hydrogel is fabricated using ubiquitous nature derived biological macromolecules, quaternized chitosan (QCS), tannic acid (TA) and oxidant hyaluronic acid (OHA), driving by multiple dynamic interactions under physiological conditions. The hydrogel can serve as multiple functional wound dress with injectable and self-healing capabilities coupling with attractive antibacterial activity and antioxidation. The biocompatible and self-biodegradable hydrogel augments free radical scavenging capacity, antibacterial, angiogenesis, mature granulation tissue and collagen disposition, enabling fast wound healing of rat skin full-thickness incision model. This study highlights a wound dressing platform of hyaluronic acid and chitosan based injectable and self-healing hydrogel with inherent antibacterial and antioxidant bioactivities, thereby avoiding the use of antibiotics or antioxidant agents.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Natural Small Biological Molecule Based Supramolecular Bioadhesives with Innate Photothermal Antibacterial Capability for Nonpressing Hemostasis and Effective Wound Healing

Bioadhesives with immediate wound closure, efficient hemostasis, and antibacterial properties that can well integrate with tissue are urgently needed in wound management. Natural small biological molecule based bioadhesives hold great promise for manipulating wound healing by taking advantage of integrated functionalities, synthetic simplification, and accuracy, cost efficiency and biosafety. Herein, a natural small biological molecule based bioadhesive, composed of natural small biological molecules (α-lipoic acid and tannic acid) and a small amount of ferric chloride, was prepared via an extremely simple and green route for wound management. In this system, covalent and noncovalent interactions between each component resulted in the self-healing supramolecular bioadhesive. It possessed appropriate wet-tissue adhesion, efficient nonpressing hemostasis and free radical scavenging abilities. More importantly, the interaction between tannic acid and Fe³⁺ endowed the bioadhesive with innate and steady photothermal activity, which showed excellent photothermal bactericidal activity to both E. coli and S. aureus. The bioadhesive promoted wound healing for linear and circular wounds in vivo, especially for infectious wounds under near-infrared (NIR) irradiation. This bioadhesive will have promising value as a safe and effective antimicrobial adhesive for infectious wound management.

Bio-macromolecular design roadmap towards tough bioadhesives

Emerging sutureless wound-closure techniques have led to paradigm shifts in wound management. State-of-the-art biomaterials offer biocompatible and biodegradable platforms enabling high cohesion (toughness) and adhesion for rapid bleeding control as well as robust attachment of implantable devices. Tough bioadhesion stems from the synergistic contributions of cohesive and adhesive interactions. This Review provides a biomacromolecular design roadmap for the development of tough adhesive surgical sealants. We discuss a library of materials and methods to introduce toughness and adhesion to biomaterials. Intrinsically tough and elastic polymers are leveraged primarily by introducing strong but dynamic inter- and intramolecular interactions either through polymer chain design or using crosslink regulating additives. In addition, many efforts have been made to promote underwater adhesion via covalent/noncovalent bonds, or through micro/macro-interlock mechanisms at the tissue interfaces. The materials settings and functional additives for this purpose and the related characterization methods are reviewed. Measurements and reporting needs for fair comparisons of different materials and their properties are discussed. Finally, future directions and further research opportunities for developing tough bioadhesive surgical sealants are highlighted.

Tannic acid-inspired star polymers for functional metal-phenolic networks with tunable pore sizes

Tannic acid (TA) is a structurally undefined natural dendritic polyphenol. Here, we introduce a series of TA-inspired polymers with different arm lengths, M_n, and phenolic groups that can be used to engineer metal-phenolic network (MPN) capsules with different properties including controlled permeability, high biocompatibility, and fluorescence.

Injectable Adhesive Hydrogels for Soft tissue Reconstruction: A Materials Chemistry Perspective

Injectable bioadhesives offer several advantages over conventional staples and sutures in surgery to seal and close incisions or wounds. Despite the growing research in recent years few injectable bioadhesives are available for clinical use. This review summarizes the key chemical features that enable the development and improvements in the use of polymeric injectable hydrogels as bioadhesives or sealants, their design requirements, the gelation mechanism, synthesis routes, and the role of adhesion mechanisms and strategies in different biomedical applications. It is envisaged that developing a deep understanding of the underlying materials chemistry principles will enable researchers to effectively translate bioadhesive technologies into clinically-relevant products.

Strong-Weak Response Network-Enabled Ionic Conductive Hydrogels with High Stretchability, Self-Healability, and Self-Adhesion for Ionic Sensors

The requirement of ionic conductive hydrogels with tailor-made superelasticity and high chain mobility is highly desired while meeting a challenge. Herein, ionic conductive hydrogels with the design of strong-weak response networks were synthesized via the free-radical copolymerization of monomers of 1-methyl-3-(4-vinylbenzyl)imidazolium chloride and sodium 2-acrylamino-2-methylpropanesulfonate in water. The as-formed strong-weak response networks in ionic conductive hydrogels included binary interactions of strong electrostatic forces and weak hydrogen bonds. The electrostatic forces imparted excellent mechanical elasticity, and the hydrogen-bonded interactions served as highly active and reversible networks to dissipate fracture energy during the deformation. Importantly, the resultant ionic conductive hydrogels exhibited high toughness of ∼2205 kJ m^-3, satisfying fatigue resistance, and excellent healing efficiency of >90%. Moreover, the tailoring of counterion concentrations in hydrogels by adding various concentrations of inorganic salts could regulate the electrostatic forces within hydrogels as well as the finally mechanical strengths. Ascribing to the combination of large stretchability and large chain mobility, the resultant ionic conductive hydrogels could directly act as a stretchable ionic conductor for the assembly of self-healable and self-adhesive capacitance-type ionic sensors which are capable of detecting large and tiny human activities. This study could offer a promising strategy for the design and manufacturing of emerging ionic conductors with high mechanical elasticity and large segment mobility.

Self-Standing, Photothermal-Actuating, and Motion-Monitoring Janus Films One-Pot Synthesized by Green Carboxymethyl Glucomannan/Liquid Metal Nanoinks

Downsizing bulk liquid metals (LM) at the nanometer scale with biocompatibility and multifunction is a key process for electronic or medical applications. Here, we report a stable and green LM aqueous colloidal ink by wrapping eutectic gallium-indium alloys (EGaIn) with carboxymethyl glucomannan (CGM) derived from radiata pine chip, which is capable of being prepared into a free-standing, photothermal-actuating, and motion-monitoring Janus film. With the assistance of CGM, the bulk EGaIn was ultrasonicated into stable nanodroplets (∼500 nm) with a typical "core-shell" structure, in which the colloidal inks can be stored for more than 1 week under room temperature. The stable CGM/EGaIn inks can be patterned on different substrates to form coating layers or self-assembled into free-standing Janus films with high mechanical strength and modulus (∼94 MPa and ∼3.8 GPa) by density deposition. Such a Janus film with anisotropic thermal conductivity made it a potential photothermal actuator. In addition, the biocompatible film demonstrated both high conductivity and large resistance variation in response to strain change (gauge factor >500), allowing for human motion monitoring. This work provides a new prospect for the development of biocompatible and high-performance nano-LM materials.

Metal Ion-Directed Functional Metal-Phenolic Materials

Metal ions are ubiquitous in nature and play significant roles in assembling functional materials in fields spanning chemistry, biology, and materials science. Metal-phenolic materials are assembled from phenolic components in the presence of metal ions through the formation of metal-organic complexes. Alkali, alkali-earth, transition, and noble metal ions as well as metalloids interacting with phenolic building blocks have been widely exploited to generate diverse hybrid materials. Despite extensive studies on the synthesis of metal-phenolic materials, a comprehensive summary of how metal ions guide the assembly of phenolic compounds is lacking. A fundamental understanding of the roles of metal ions in metal-phenolic materials engineering will facilitate the assembly of materials with specific and functional properties. In this review, we focus on the diversity and function of metal ions in metal-phenolic material engineering and emerging applications. Specifically, we discuss the range of underlying interactions, including (i) cation-π, (ii) coordination, (iii) redox, and (iv) dynamic covalent interactions, and highlight the wide range of material properties resulting from these interactions. Applications (e.g., biological, catalytic, and environmental) and perspectives of metal-phenolic materials are also highlighted.

Kneading-Inspired Versatile Design for Biomimetic Skins with a Wide Scope of Customizable Features

Biomimetic skins featuring customizable functions and human tissue-compatible mechanical properties have garnered tremendous interest for potential applications in human-machine interfaces, flexible wearable devices, and soft robotics. However, most existing skin-like materials require complex molecular design or multistep functionalization to achieve various functionalities that match or even surpass the performance of human skin. Thus, simultaneously minimizing production costs and achieving customizable features are still highly desirable yet challenging. Herein, inspired by a well-known kneading technique that renders a homogeneous mixture of all the ingredients, a versatile method involving two steps of kneading and resting is employed to prepare biomimetic skins with a wide scope of customizable features. Commonly used one-dimensional (1D), two-dimensional (2D), three-dimensional (3D) nanofillers and even solvents are demonstrated to be homogeneously dispersed in the viscoelastic hydrogel matrices by hand kneading, which not only contributes to improved mechanical properties and new functionalities, but also makes full use of raw materials without waste. Furthermore, similar to the combination of "condiments" in kneading dough, the flexible integration of functional fillers offers exciting and versatile platforms for the design of biomimetic skins with tunable application-specific properties, such as mechanical compliance, sensory capabilities, freezing resistance, 3D printability, fluorescence tunability, etc.

A silk fibroin based bioadhesive with synergistic photothermal-reinforced antibacterial activity

Bioadhesives have gained considerable popularity for application in wound closure. However, applying bioadhesives incurs risks associated with bacterial infection during wound healing. Hence, in this study, a silk fibroin based bioadhesive was constructed via employing natural macromolecule, silk fibroin (SF), to spontaneously coassemble with natural plant polyphenol, tannic acid (TA), and iron oxide nanoparticles (Fe₃O₄ NPs). In the system, the natural macromolecule SF plays a key role in fabricating the macromolecular network matrix due to the change of the secondary structure of SF (from random coil to β-sheet) under the trigger of TA. Importantly, the strong hydrogen bonding interactions between SF and TA, and the coordination bonds between TA and Fe₃O₄ NPs endow the bioadhesive with high extensibility, self-healing properties, and considerable wet adhesion. Meanwhile, the synergy between the inherent photothermal properties of Fe₃O₄ NPs and TA/Fe³⁺ complexes under near-infrared (NIR) radiation enables the bioadhesive superior photothermal-reinforced antibacterial activity. The multifunctional natural macromolecule bioadhesive is a potential candidate in clinical wound management for improved outcomes, especially in infected wounds.

Degradable Hydrogel Adhesives with Enhanced Tissue Adhesion, Superior Self-Healing, Cytocompatibility, and Antibacterial Property

Degradable hydrogel adhesives with multifunctional advantages are promising to be candidates as hemostatic agents, surgical sutures, and wound dressings. In this study, hydrogel adhesives are constructed by catechol-conjugated gelatin from natural resource, iron ions (Fe³⁺ ), and a synthetic polymer. Specifically, the latter is prepared by the radical ring-opening copolymerization of a cyclic ketene acetal monomer 5,6-benzo-2-methylene-1,3-dioxepane and N-(2-ethyl p-toluenesulfonate) maleimide. By the incorporation of ester bonds in the backbone and the combination with quaternary ammonium salt pendants in the polymer, it exhibits excellent degradability and antibacterial property. Remarkably, doping the synthetic polymer into the 3,4-dihydroxyphenylacetic acid-modified gelatin network forms a semi-interpenetrating polymer network which can effectively improve the rigidity, tissue adhesion, and antibacterial property of fabricated hydrogel adhesives. Moreover, non-covalent bonds from coordination interaction between catechol and Fe³⁺ contribute to the fast self-healing of the developed hydrogel adhesives. These hydrogel adhesives with the multiple merits including the degradability, enhanced tissue adhesion, superior self-healing, good cytocompatibility, and antibacterial property show the great potential to be used as tissue adhesives in biomedical fields.

Supramolecular Adhesive Hydrogels for Tissue Engineering Applications

Tissue engineering is a promising and revolutionary strategy to treat patients who suffer the loss or failure of an organ or tissue, with the aim to restore the dysfunctional tissues and enhance life expectancy. Supramolecular adhesive hydrogels are emerging as appealing materials for tissue engineering applications owing to their favorable attributes such as tailorable structure, inherent flexibility, excellent biocompatibility, near-physiological environment, dynamic mechanical strength, and particularly attractive self-adhesiveness. In this review, the key design principles and various supramolecular strategies to construct adhesive hydrogels are comprehensively summarized. Thereafter, the recent research progress regarding their tissue engineering applications, including primarily dermal tissue repair, muscle tissue repair, bone tissue repair, neural tissue repair, vascular tissue repair, oral tissue repair, corneal tissue repair, cardiac tissue repair, fetal membrane repair, hepatic tissue repair, and gastric tissue repair, is systematically highlighted. Finally, the scientific challenges and the remaining opportunities are underlined to show a full picture of the supramolecular adhesive hydrogels. This review is expected to offer comparative views and critical insights to inspire more advanced studies on supramolecular adhesive hydrogels and pave the way for different fields even beyond tissue engineering applications.

Injectable and Self-Healing Hydrogels with Double-Dynamic Bond Tunable Mechanical, Gel-Sol Transition and Drug Delivery Properties for Promoting Periodontium Regeneration in Periodontitis

Injection of a hydrogel loaded with drugs with simultaneous anti-inflammatory and tissue regenerating properties can be an effective treatment for promoting periodontal regeneration in periodontitis. Nevertheless, the design and preparation of an injectable hydrogel with self-healing properties for tunable sustained drug release is still highly desired. In this work, polysaccharide-based hydrogels were formed by a dynamic cross-linked network of dynamic Schiff base bonds and dynamic coordination bonds. The hydrogels showed a quick gelation process, injectability, and excellent self-healing properties. In particular, the hydrogels formed by a double-dynamic network would undergo a gel-sol transition process without external stimuli. And the gel-sol transition time could be tuned by the double-dynamic network structure for in situ stimuli involving a change in its own molecular structure. Moreover, the drug delivery properties were also tunable owing to the gel-sol transition process. Sustained drug release characteristics, which were ascribed to a diffusion process, were observed during the first stage of drug release, and complete drug release owing to the gel-sol transition process was achieved. The sustained drug release time could be tuned according to the double-dynamic bonds in the hydrogel. The CCK-8 assay was used to evaluate the cytotoxicity, and the result showed no cytotoxicity, indicating that the injectable and self-healing hydrogels with double-dynamic bond tunable gel-sol transition could be safely used in controlled drug delivery for periodontal disease therapy. Finally, the promotion of periodontal regeneration in periodontitis in vivo was investigated using hydrogels loaded with ginsenoside Rg1 and amelogenin. Micro-CT and histological analyses indicated that the hydrogels were promising candidates for addressing the practical needs of a tunable drug delivery method for promoting periodontal regeneration in periodontitis.

Atmospheric Hygroscopic Ionogels with Dynamically Stable Cooling Interfaces Enable a Durable Thermoelectric Performance Enhancement

In thermoelectric generator (TEG) systems, heat dissipation from their cold sides is an accessible, low-cost, and effective way to increase the temperature gap for their thermoelectric performance enhancement. Although significant efforts have been dedicated mediated by hygroscopic hydrogel coolers as self-sustained alternatives for effective heat removal, it still remains a challenge for overcoming instabilities in their cooling process. The inevitable mechanical deformation of these conventional hydrogels induced by excessive water desorption may cause a detached cooling interface with the targeted substrates, leading to undesirable cooling failure. Herein, a self-sustained and durable evaporative cooling approach for TEG enabled by atmospheric hygroscopic ionogels (RIGs) with stable interfaces to efficiently improve its thermoelectric performance is proposed. Owing to its superior hygroscopicity, the RIGs can achieve higher heat dissipation for TEG through water evaporation than that of common commercial metal heat sinks. Moreover, its favorable adhesion enables the RIG closely interact with the TEG surface either in static or dynamic conditions for a durable thermoelectric performance enhancement. It is believed that such a self-sustained evaporative cooling strategy based on the RIG will have great implications for the enhancement of TEG's efficiency, demonstrating a great promise in intermittent thermal-energy utilizations.

Fluorescent, electrically responsive and ultratough self-healing hydrogels via bioinspired all-in-one hierarchical micelles

Intelligent hydrogels that simultaneously exhibit excellent toughness, self-healing ability and photoelectronic responsiveness are in high demand but are greatly challenging to prepare. Inspired by the hierarchical structure of fluorescent proteins in jellyfish and biomembranes in nature, herein, a facile and universal all-in-one strategy is demonstrated to construct fluorescent, electrically responsive and ultratough self-healing hydrogels via aqueous self-assembly of polyelectrolyte-surfactant micelles with hierarchical structures and functionality. The self-assembled 2-ureido-4-[1H]-pyrimidone (UPy) hydrophobic core containing reversible physical crosslinks embedded in micelles leads to a durable network structure with excellent toughness and self-healing ability. Moreover, dramatically enhanced fluorescence emission is obtained due to the formation of nanoclusters with electron-rich moieties that show restricted intramolecular motion induced by hydrogen bonding networks from UPy dimer aggregation. The micelle-incorporated sulfonic acid groups mimic the function of biological membrane proteins that deftly control the micelle size, leading to electro-responsiveness, enhanced toughness and fluorescence emission.