Electrocatalytic CO2 reduction to formate by a cobalt phosphino-thiolate complex

Electrochemical conversion of CO2 to value-added products serves as an attractive method to store renewable energy as energy-dense fuels. Selectivity in this type of conversion can be limited, often leading to the formation of side products such as H2. The activity of a cobalt phosphino-thiolate complex ([Co(triphos)(bdt)]+) towards the selective reduction of CO2 to formate is explored in this report. In the presence of H2O, selective production of formate (as high as 94%) is observed at overpotentials of 750 mV, displaying negligible current degradation during long-term electrolysis experiments ranging as long as 24 hours. Chemical reduction studies of [Co(triphos)(bdt)]+ indicates deligation of the apical phosphine moiety is likely before catalysis. Computational and experimental results suggest a metal-hydride pathway, indicating an ECEC based mechanism.

Cobalt-Catalyzed Acceptorless Dehydrogenation of Primary Amines to Nitriles

The direct double dehydrogenation from primary amines to nitriles without an oxidant or hydrogen acceptor is both intriguing and challenging. In this paper, we describe a non-noble metal catalyst capable of realizing such a transformation with high efficiency. A cobalt-centered N,N-bidentate complex was designed and employed as a metal-ligand cooperative dehydrogenation catalyst. Detailed kinetic studies, control experiments, and DFT calculations revealed the crucial hydride transfer, proton transfer, and hydrogen evolution processes. Finally, a tandem outer-sphere/inner-sphere mechanism was proposed for the dehydrogenation of amines to nitriles through an imine intermediate.

In Situ UV-Vis-NIR Absorption Spectroscopy and Catalysis

This review highlights in situ UV-vis-NIR range absorption spectroscopy in catalysis. A variety of experimental techniques identifying reaction mechanisms, kinetics, and structural properties are discussed. Stopped flow techniques, use of laser pulses, and use of experimental perturbations are demonstrated for in situ studies of enzymatic, homogeneous, heterogeneous, and photocatalysis. They access different time scales and are applicable to different reaction systems and catalyst types. In photocatalysis, femto- and nanosecond resolved measurements through transient absorption are discussed for tracking excited states. UV-vis-NIR absorption spectroscopies for structural characterization are demonstrated especially for Cu and Fe exchanged zeolites and metalloenzymes. This requires combining different spectroscopies. Combining magnetic circular dichroism and resonance Raman spectroscopy is especially powerful. A multitude of phenomena can be tracked on transition metal catalysts on various supports, including changes in oxidation state, adsorptions, reactions, support interactions, surface plasmon resonances, and band gaps. Measurements of oxidation states, oxygen vacancies, and band gaps are shown on heterogeneous catalysts, especially for electrocatalysis. UV-vis-NIR absorption is burdened by broad absorption bands. Advanced analysis techniques enable the tracking of coking reactions on acid zeolites despite convoluted spectra. The value of UV-vis-NIR absorption spectroscopy to catalyst characterization and mechanistic investigation is clear but could be expanded.

Spatial Confinement of Pt Nanoparticles in Carbon Nanotubes for Efficient and Selective H2 Evolution from Methanol

H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of O─H bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.

Tandem effect at snowflake-like cuprous sulphide interfaces for highly selective conversion of carbon dioxide to formate by electrochemical reduction

Electrochemical carbon dioxide reduction (ECR) is a commercially promising technology to resolve the energy dilemma and accomplish carbon recycling. Herein, a novel electrocatalyst has been investigated to produce formate (HCOOH) highly selectively during ECR by loading SnO2@C onto cuprous sulphide (Cu2S) to form a triplet effect at the interface. Snowflake-like Cu2S significantly enhances the local concentration of carbon dioxide (CO2) and promotes the binding of CO2 with SnO2, and the addition of carbon spheres enhances the electron transport, which is beneficial to the conversion of CO2 to HCOOH products. The snowflake-like Cu2S loaded with 1 wt% SnO2@C had an HCOOH Faraday Efficiency of 88% at -1.0 V (vs. Reversible Hydrogen Electrode, RHE), and the current density for CO2 reduction was stabilized at 15.6 mA cm-2, which was much higher than the HCOOH Faraday efficiency (FE) of 31.0% for pure Cu2S accompanied by a CO2 reduction current density of 3.9 mA cm-2. Combined investigations using in-situ Fourier transform infrared spectroscopy (FT-IR) with in-situ Raman spectra reveal that the active species is Cu+. Cu2S/1%SnO2@C can effectively promote the adsorption and activation of carbonate and inhibit the production of CO intermediates. The corresponding density functional theory (DFT) demonstrates that Cu2S/1%SnO2@C can well stabilize the HCOO* intermediate during the ECR process. The interaction between Cu2S and SnO2@C adjusts the surface electronic distribution and accelerates electron transfer, which efficiently improves CO2-to-HCOOH conversion. The result obtained from this work provides a simple and efficient electrocatalyst to enhance the HCOOH selectivity of ECR.

Recent Developments in Reversible CO2 Hydrogenation and Formic Acid Dehydrogenation over Molecular Catalysts

Carbon dioxide (CO2), a valuable feedstock, can be reutilized as a hydrogen carrier by hydrogenating CO2 to formic acid (FA) and releasing hydrogen by FA dehydrogenation in a reversible manner. Notably, FA is liquid at room temperature and can be stored and transported considerably more safely than hydrogen gas. Herein, we extensively reviewed transition-metal-based molecular catalysts explored for reversible CO2 hydrogenation and FA dehydrogenation. This Review describes different approaches explored for carbon-neutral hydrogen storage and release by applying CO2 hydrogenation to FA/formate and the subsequent release of H2 by the dehydrogenation of FA over a wide range of molecular catalysts based on noble and non-noble metals. Emphasis is also placed on the specific catalyst-to-substrate interaction by highlighting the specific role of the catalyst in the CO2 hydrogenation-FA dehydrogenation pathway.

Recent advances of Cp*Ir complexes for transfer hydrogenation: focus on formic acid/formate as hydrogen donors

Transfer hydrogenation reactions offer synthetically powerful strategies to deliver various hydrogenated compounds with the advantages of efficiency, atom economy, and practicability. On one hand, formic acid/formate function as promising hydrogen sources owing to their readily obtainable, inexpensive, and easy to handle nature. On the other hand, Cp*Ir complexes show high activities in transfer hydrogenation. This review highlights progress achieved for transfer hydrogenation of CO, CC, and CN bonds of a variety of unsaturated substrates, as well as amides focusing on Cp*Ir complexes as catalysts and formic acid/formate as hydrogen sources.

Renewable Hydrogen Production and Storage Via Enzymatic Interconversion of CO2 and Formate with Electrochemical Cofactor Regeneration

The urgent need to reduce CO2 emissions has motivated the development of CO2 capture and utilization technologies. An emerging application is CO2 transformation into storage chemicals for clean energy carriers. Formic acid (FA), a valuable product of CO2 reduction, is an excellent hydrogen carrier. CO2 conversion to FA, followed by H2 release from FA, are conventionally chemically catalyzed. Biocatalysts offer a highly specific and less energy-intensive alternative. CO2 conversion to formate is catalyzed by formate dehydrogenase (FDH), which usually requires a cofactor to function. Several FDHs have been incorporated in bioelectrochemical systems where formate is produced by the biocathode and the cofactor is electrochemically regenerated. H2 production from formate is also catalyzed by several microorganisms possessing either formate hydrogenlyase or hydrogen-dependent CO2 reductase complexes. Combination of these two processes can lead to a CO2 -recycling cycle for H2 production, storage, and release with potentially lower environmental impact than conventional methods.

Nanoparticulate Perovskites for Photocatalytic Water Reduction

SrTiO₃ and BaTiO₃ nanoparticles (NPs) were activated using H₂O₂ or aqueous HNO₃, and pristine and activated NPs were functionalized with a 2,2'-bipyridine phosphonic acid anchoring ligand (1), followed by reaction with RuCl₃^.3H₂O and bpy, RhCl₃^.3H₂O and bpy, or RuCl₃^.3H₂O. The surface-bound metal complex functionalized NPs were used for the photogeneration of H₂ from water, and their activity was compared to related systems using TiO₂ NPs. The role of pH during surface complexation was found to be important. The NPs were characterized using Fourier transform infrared (FTIR) and solid-state absorption spectroscopies, thermogravimetric analysis mass spectrometry (TGA-MS), and matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), and the dihydrogen generation was analyzed using gas chromatography-mass spectrometry (GC-MS). Our findings indicate that extensively functionalized SrTiO₃ or BaTiO₃ NPs may perform better than TiO₂ NPs for water reduction.

Conversion of Biomass-Derived Levulinic Acid into γ-Valerolactone Using Methanesulfonic Acid: An Optimization Study Using Response Surface Methodology

γ-Valerolactone (GVL) is a platform chemical for the synthesis of both biofuels and biochemicals. The LA production from depithed sugarcane bagasse (DSB) resulted in a 55% LA yield, and the resulting LA was used to produce GVL. The effect of process parameters, namely, temperature (25–200 °C), time (2–10 h), and catalyst loading (0.5–5 g) were investigated for the GVL production from LA. Thereafter, the optimized conditions were used to produce GVL from LA derived from depithed sugarcane bagasse (DSB) yielded a GVL of 77.6%. The hydrogen required for the reduction of LA to GVL was formed in situ by formic acid and triethylamine in the presence of methanesulfonic acid (MsOH). Different solvents (including water and alcohols) were also tested to determine their effect on GVL yield, and water yielded the highest GVL of 78.6%. Different types of catalysts, which included mineral acids and ionic liquids, were used to determine their effect on GVL yield, and to provide a benchmark against MsOH. The GVL yield from DSB-derived LA is 1.0% lower than the GVL yield from a commercial sample of LA. LA generated from DSB has the potential to replace fossil fuel-derived LA.

Ligand Design and Preparation, Photophysical Properties, and Device Performance of an Encapsulated-Type Pseudo-Tris(heteroleptic) Iridium(III) Emitter

The organic molecule 2-(1-phenyl-1-(pyridin-2-yl)ethyl)-6-(3-(1-phenyl-1-(pyridin-2-yl)ethyl)phenyl)pyridine (H3L) has been designed, prepared, and employed to synthesize the encapsulated-type pseudo-tris(heteroleptic) iridium(III) derivative Ir(κ6-fac-C,C',C″-fac-N,N',N″-L). Its formation takes place as a result of the coordination of the heterocycles to the iridium center and the ortho-CH bond activation of the phenyl groups. Dimer [Ir(μ-Cl)(η4-COD)]2 is suitable for the preparation of this compound of class [Ir(9h)] (9h = 9-electron donor hexadentate ligand), but Ir(acac)3 is a more appropriate starting material. Reactions were carried out in 1-phenylethanol. In contrast to the latter, 2-ethoxyethanol promotes the metal carbonylation, inhibiting the full coordination of H3L. Complex Ir(κ6-fac-C,C',C″-fac-N,N',N″-L) is a phosphorescent emitter upon photoexcitation, which has been employed to fabricate four yellow emitting devices with 1931 CIE (x:y) ∼ (0.52:0.48) and a maximum wavelength at 576 nm. These devices display luminous efficacies, external quantum efficiencies, and power efficacies at 600 cd m-2, which lie in the ranges 21.4-31.3 cd A-1, 7.8-11.3%, and 10.2-14.1 lm W1-, respectively, depending on the device configuration.

Dynamic effects on ligand field from rapid hydride motion in an iron(ii) dimer with an S = 3 ground state

Hydride complexes are important in catalysis and in iron-sulfur enzymes like nitrogenase, but the impact of hydride mobility on local iron spin states has been underexplored. We describe studies of a dimeric diiron(ii) hydride complex using X-ray and neutron crystallography, Mössbauer spectroscopy, magnetism, DFT, and ab initio calculations, which give insight into the dynamics and the electronic structure brought about by the hydrides. The two iron sites in the dimer have differing square-planar (intermediate-spin) and tetrahedral (high-spin) iron geometries, which are distinguished only by the hydride positions. These are strongly coupled to give an S total = 3 ground state with substantial magnetic anisotropy, and the merits of both localized and delocalized spin models are discussed. The dynamic nature of the sites is dependent on crystal packing, as shown by changes during a phase transformation that occurs near 160 K. The change in dynamics of the hydride motion leads to insight into its influence on the electronic structure. The accumulated data indicate that the two sites can trade geometries by rotating the hydrides, at a rate that is rapid above the phase transition temperature but slow below it. This small movement of the hydrides causes large changes in the ligand field because they are strong-field ligands. This suggests that hydrides could be useful in catalysis not only due to their reactivity, but also due to their ability to rapidly modulate the local electronic structure and spin states at metal sites.

Activation of H-H, HO-H, C(sp2)-H, C(sp3)-H, and RO-H Bonds by Transition-Metal Frustrated Lewis Pairs Based on M/N (M = Rh, Ir) Couples

Reaction of the dimers [(Cp*MCl)₂(μ-Cl)₂] (Cp* = η⁵-C₅Me₅) with Ph₂PCH₂CH₂NC(NH(p-Tolyl))₂ (H₂L) in the presence of NaSbF₆ affords the chlorido complexes [Cp*MCl(κ²N,P-H₂L)][SbF₆] (M = Rh, 1; Ir, 2). Upon treatment with aqueous NaOH, solutions of 1 and 2 yield the corresponding complexes [Cp*M(κ³N,N′,P-HL)][SbF₆] (M = Rh, 3; Ir, 4) in which the ligand HL presents a fac κ³N,N′,P coordination mode. Treatment of THF solutions of complexes 3 and 4 with hydrogen gas, at room temperature, results in the formation of the metal hydrido-complexes [Cp*MH(κ²N,P-H₂L)][SbF₆] (M = Rh, 5; Ir, 6) in which the N(p-Tolyl) group has been protonated. Complexes 3 and 4 react with deuterated water in a reversible fashion resulting in the gradual deuteration of the Cp* group. Heating at 383 K THF/H₂O solutions of the complexes 3 and 4 affords the orthometalated complexes [Cp*M(κ³C,N,P-H₂L_-H)][SbF₆] [M = Rh, 7; Ir, 8, H₂L_-H = Ph₂PCH₂CH₂NC(NH(p-Tolyl))(NH(4-C₆H₃Me))], respectively. At 333 K, complexes 3 and 4 react in THF with methanol, primary alcohols, or 2-propanol giving the metal-hydrido complexes 5 and 6, respectively. The reaction involves the acceptorless dehydrogenation of the alcohols at a relatively low temperature, without the assistance of an external base. The new complexes have been characterized by the usual analytical and spectroscopic methods including the X-ray diffraction determination of the crystal structures of complexes 1–5, 7, and 8. Notably, the chlorido complexes 1 and 2 crystallize both as enantiopure conglomerates and as racemates. Reaction mechanisms are proposed based on stoichiometric reactions, nuclear magnetic resonance studies, and X-ray crystallography as well as density functional theory calculations.

In solution, masked transition-metal frustrated Lewis pairs (TMFLPs) give rise to the corresponding TMFLP species which activate dihydrogen, water, and alcohols following FLP reaction pathways. When D₂O or alcohols with deuterated OH groups were employed, H/D exchange at the Cp* ligand (involving C(sp³)−H activation) was observed. C(sp²)−H bond activation involving orthometalation of the p-Tolyl ring was also observed.

Iridium-Catalyzed Dehydrogenation in a Continuous Flow Reactor for Practical On-Board Hydrogen Generation From Liquid Organic Hydrogen Carriers

To enable the large-scale use of hydrogen fuel cells for mobility applications, convenient methods for on-board hydrogen storage and release are required. A promising approach is liquid organic hydrogen carriers (LOHCs), since these are safe, available on a large scale, and compatible with existing refueling infrastructure. Usually, LOHC dehydrogenation is carried out in batch-type reactors by transition metals and their complexes and suffers from slow H₂ release kinetics and/or inability to reach high energy density by weight, owing to low conversion or the need to dilute the reaction mixture. In this study, a continuous flow reactor is used in combination with a heterogenized iridium pincer complex, which enables a tremendous increase in LOHC dehydrogenation rates. Thus, dehydrogenation of isopropanol is performed in a regime that, in terms of gravimetric energy density, hydrogen generation rate, and precious metal content, is potentially compatible with applications in a fuel-cell powered car.

Boron nitride nanosheets supported highly homogeneous bimetallic AuPd alloy nanoparticles catalyst for hydrogen production from formic acid

Formic acid (FA) has been recently regarded as a safe and stable source of hydrogen (H₂). Selective and efficient dehydrogenation of FA by an effective catalyst under mild conditions is still a challenge. So, different molar ratios of bimetallic Pd-Au alloy nanoparticles were effectively stabilized and uniformly distributed on boron nitride nanosheets (BNSSs) surface via the precipitation process. Obtained catalysts were employed in FA decomposition for H₂production. Pd-Au@BNNS containing 3% Au and 5% Pd (Au_.03Pd_.05@BNNS) exhibited high activity and 100% H₂selectivity for H₂production from FA at 50 °C. In order to optimize the reaction conditions, various factors including, time, temperature, solvent, base type, and amount of catalyst, were examined.

Formic Acid Dehydrogenation Using Noble-Metal Nanoheterogeneous Catalysts: Towards Sustainable Hydrogen-Based Energy

The need for sustainable energy sources is now more urgent than ever, and hydrogen is significant in the future of energy. However, several obstacles remain in the way of widespread hydrogen use, most of which are related to transport and storage. Dilute formic acid (FA) is recognized asa a safe fuel for low-temperature fuel cells. This review examines FA as a potential hydrogen storage molecule that can be dehydrogenated to yield highly pure hydrogen (H2) and carbon dioxide (CO2) with very little carbon monoxide (CO) gas produced via nanoheterogeneous catalysts. It also present the use of Au and Pd as nanoheterogeneous catalysts for formic acid liquid phase decomposition, focusing on the influence of noble metals in monometallic, bimetallic, and trimetallic compositions on the catalytic dehydrogenation of FA under mild temperatures (20–50 °C). The review shows that FA production from CO2 without a base by direct catalytic carbon dioxide hydrogenation is far more sustainable than existing techniques. Finally, using FA as an energy carrier to selectively release hydrogen for fuel cell power generation appears to be a potential technique.

Hydrogenation of CO2 or CO2 Derivatives to Methanol under Molecular Catalysis: A Review

The atmospheric CO2 concentration has been continuously increasing due to fossil fuel combustion. The transformations of CO2 and CO2 derivatives into high value-added chemicals such as alcohols are ideal routes to mitigate greenhouse gas emissions. Among alcohol products, methanol is very promising as it fulfills the carbon neutral cycle and can be used for direct methanol fuel cells. Herein, we summarize the recent progress in the hydrogenation of CO2 or CO2 derivatives to methanol, and focus on those systems with homogeneous catalysts and molecular hydrogen as the reductant. Discussions on the catalytic systems, efficiencies, and future outlooks will be given.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Attraction in Action: Reduction of Water to Dihydrogen Using Surface-Functionalized TiO2 Nanoparticles

The reactivity of a heterogeneous rhodium(III) and ruthenium(II) complex-functionalized TiO₂ nanoparticle (NP) system is reported. The ruthenium and rhodium metal complexes work in tandem on the TiO₂ NPs surface to generate H₂ through water reduction under simulated and normal sunlight irradiation. The functionalized TiO₂ NPs outperformed previously reported homogeneous systems in turnover number (TON) and frequency (TOF). The influence of individual components within the system, such as pH, additive, and catalyst, were tested. The NP material was characterized using TGA-MS, ¹H NMR spectroscopy, FTIR spectroscopy, solid absorption spectroscopy, and ICP-MS. Gas chromatography was used to determine the reaction kinetics and recyclability of the NP-supported photocatalyst.

Selective desaturation of amides: a direct approach to enamides

C(sp³)–H bond desaturation has been an attractive strategy in organic synthesis. Enamides are important structural fragments in pharmaceuticals and versatile synthons in organic synthesis. However, the dehydrogenation of amides usually occurs on the acyl side benefitting from enolate chemistry like the desaturation of ketones and esters. Herein, we demonstrate an Fe-assisted regioselective oxidative desaturation of amides, which provides an efficient approach to enamides and β-halogenated enamides.

A novel and regioselective N-α,β-desaturation and dehydrogenative N-β-halogenation of amides was developed. This chemistry with high selectivity and broad substrate scope provides an efficient approach to enamides from simple amides.

Bimetallic PdCo Nanoparticles Loaded in Amine Modified Polyacrylonitrile Hollow Spheres as Efficient Catalysts for Formic Acid Dehydrogenation

Polyacrylonitrile hollow nanospheres (HPAN), derived from the polymerization of acrylonitrile in the presence of polystyrene emulsion (as template), were modified by surface amination with ethylenediamine (EDA), and then used as support for loading Pd or PdCo nanoparticles (NPs). The resultant bimetallic catalyst (named PdCo0.2/EDA-HPAN) can efficiently catalyze the additive-free dehydrogenation of formic acid with very high activity, selectivity and recyclability, showing turnover frequencies (TOF) of 4990 h−1 at 333 K and 915 h−1 at 303 K, respectively. The abundant surface amino groups and cyano group as well as the hollow structure of the support offer a suitable environment for achieving high dispersion of the Pd-based NPs on the surface of EDA-HPAN, thus generating ultra-small bimetallic NPs (bellow 1.0 nm) with high stability. The addition of a small portion of Co may adjust the electronic state of Pd species to a certain extent, which can further improve their capability for the dehydrogenation of formic acid. In addition, the surface amino groups may also play an important role in synergistically activating formic acid to generate formate, thus leading to efficient conversion of formic acid to hydrogen at mild conditions.

Metal-Ligand Cooperation in Cp*Ir-Pyridylpyrrole Complexes: Rational Design and Catalytic Activity in Formic Acid Dehydrogenation and CO2 Hydrogenation under Ambient Conditions

Interconversion between CO₂ + H₂ and FA/formate is the most promising strategy for the fixation of carbon dioxide and reversible hydrogen storage; however, FA dehydrogenation and CO₂ hydrogenation are usually studied separately using different catalysts for each reaction. This report describes of the catalysis of [Cp*Ir(N∧N)(X)]ⁿ⁺ (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; X = Cl, n = 0; X = H₂O, n = 1) bearing a proton-responsive N∧N pyridylpyrrole ligand for both reactions. Complex 2-H₂O catalyzes FA dehydrogenation at 90 °C with a TOF_max of 45 900 h^-1. Its catalysis is more active in aqueous solution than in neat solution under base-free conditions. These complexes also catalyze CO₂ hydrogenation in the presence of base to formate under atmospheric pressure (CO₂/H₂ = 0.05 MPa/0.05 MPa) at 25 °C with a TOF value of 4.5 h^-1 in aqueous solution and with a TOF value of 29 h^-1 in a methanol/H₂O mixture solvent. The possible mechanism is proposed by intermediate characterization and KIE experiments. The extraordinary activity of these complexes are mainly attributed to the metal-ligand cooperative effect of the the pyrrole group to accept a proton in the dehydrogenation of formic acid and assist cooperative heterolytic H-H bond cleavage in CO₂ hydrogenation.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Density functional study on formic acid decomposition on Pd(111) surface: a revisit and comparison with other density functional methods

The mechanism of formic acid decomposition on the Pd(111) surface has been investigated by several theoretical methods in previous studies, including PBE and PW91. These results indicated that the mechanism is different from different methods, and even by using the same method (i.e., PBE), the mechanism is also different. In this study, we have revisited the formic acid decomposition on Pd(111) surface by using another density functional RPBE and by including van der Waals interaction which is neglected in the previous studies. Our results showed that the formic acid is decomposed via O-H bond cleavage to form bi-HCOO^*, and the most favorable pathway is HCOOH^* → bi-HCOO^* + H^* → CO₂^* + 2H^*. The energy barrier is 0.55 eV at the rate-determining step. This conclusion is consistent with one of the PBE study. This demonstrated that computational methods have a great influence on the reaction mechanism, and care should be taken in selecting the appropriate computational methods.

Pseudo-Tris(heteroleptic) Red Phosphorescent Iridium(III) Complexes Bearing a Dianionic C,N,C',N'-Tetradentate Ligand

1-Phenyl-3-(1-phenyl-1-(pyridin-2-yl)ethyl)isoquinoline (H₂MeL) has been prepared by Pd(N-XantPhos)-catalyzed “deprotonative cross-coupling processes” to synthesize new phosphorescent red iridium(III) emitters (601–732 nm), including the carbonyl derivative Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)Cl(CO) and the acetylacetonate compound Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)(acac). The tetradentate 6e-donor ligand (6tt′) of these complexes is formed by two different bidentate units, namely, an orthometalated 2-phenylisoquinoline and an orthometalated 2-benzylpyridine. The link between the bidentate units reduces the number of possible stereoisomers of the structures [6tt′ + 3b] (3b = bidentate 3e-donor ligand), with respect to a [3b + 3b′ + 3b″] emitter containing three free bidentate units, and it permits a noticeable stereocontrol. Thus, the isomers fac-Ir(κ⁴-cis-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆H₄-py)}, mer-Ir(κ⁴-cis-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆H₃R-py)}, and mer-Ir(κ⁴-trans-C,C′-cis-N,N′-MeL){κ²-C,N-(C₆HR-py)} (R = H, Me) have also been selectively obtained. The new emitters display short lifetimes (0.7–4.6 μs) and quantum yields in a doped poly(methyl methacrylate) film at 5 wt % and 2-methyltetrahydrofuran at room temperature between 0.08 and 0.58. The acetylacetonate complex Ir(κ⁴-cis-C,C′-cis-N,N′-MeL)(acac) has been used as a dopant for a red PhOLED device with an electroluminescence λ_max of 672 nm and an external quantum efficiency of 3.4% at 10 mA/cm².

The proligand 1-phenyl-3-(1-phenyl-1-(pyridine-2-yl)ethyl)isoquinoline is used to generate a new family of neutral phosphorescent red iridium(III) emitters containing a tetradentate ligand, formed by two different bidentate units, and a third bidentate ligand with a good stereocontrol of the resulting [6tt′ + 3b] products. One of the new emitters has been used in the fabrication of an OLED device.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Oxy-tethered Cp*Ir(III) complex as a competent catalyst for selective dehydrogenation from formic acid

A bifunctional tethered iridium catalyst containing a 1,2-diphenylethylenediamine framework was synthesised for the first time. The ethereal tether chain was easily constructed via the intramolecular oxydefluorination of a perfluorophenylsulfonyl substituent by using a modified 1,2,3,4,5-pentamethylcyclopentadienyl ligand with a hydroxyalkyl chain. The conformationally constrained structure could hamper deactivation pathways in the catalytic hydrogen generation from formic acid, leading to advanced durability and complete conversion.

Copper(I) Complexes Containing PCP Ligand Catalyzed Hydrogenation of Carbon Dioxide to Formate under Ambient Conditions

The five new copper(I) complexes [Cu₂(μ-Cl)₂(κ¹-PCP^t-Bu)] (1), [Cu₂(μ-Br)₂(κ¹-PCP^t-Bu)] (2), [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3), [Cu₂(μ-CN)₂(κ¹-PCP^t-Bu)] (4), and [Cu₄(μ₃-SCN)₄(κ¹-PCP^t-Bu)₂]·CH₂Cl₂ (5) bearing a 1,3-bis[(di-tert-butylphosphino)methyl]benzene ligand were synthesized and characterized spectroscopically, and the molecular structures of 1, 3, and 5 were determined by single-crystal X-ray diffraction techniques. Structural studies for 1 and 3 revealed their binuclear structures with Cu···Cu separations of 2.609(3) and 2.6359(19) Å, respectively. However, 5 has a tetranuclear cubane structure with an 18-electron configuration at each copper without any metal-metal bonds. The two copper centers in 1 and 3 are bonded to one bridging PCP^t-Bu ligand in a κ¹-manner and two bridging (pseudo)halido ligands in a μ₂-bonding mode to generate a nonplanar Cu₂(μ-X)₂ framework. The four copper centers in 5 are at the vertices of a tetrahedron. Each copper center has pseudo-tetrahedral coordination provided by two bridging PCP^t-Bu ligands in a κ¹-manner and the four bridging thiocyanate groups in a μ₃-manner. These complexes were used as catalysts for the hydrogenation of CO₂ to formate in the presence of DBU as a base to produce valuable energy-rich chemicals, and therefore it is a promising, safe, and simple strategy to conduct reactions under ambient pressure at room temperature. Among all of the five copper(I) complex based catalysts, 3 displayed the best catalytic performance with turnover number (TON) values of 38-8700 in 12-48 h of reaction at 25-80 °C. The outstanding catalytic performance of [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3) makes it a potential candidate for realizing the large-scale production of formate by CO₂ hydrogenation.

Bifunctional Palladium Hydride Nanodendrite Electrocatalysts for Hydrogen Evolution Integrated with Formate Oxidation

The rational design of advanced electrocatalysts and energy-saving electrolysis strategies is highly desirable for achieving high-efficiency electrochemical H₂ generation yet challenging. In this work, we report highly branched Pd hydride nanodendrites (PdH-NDs) formed by a very facial solvothermal method and a succedent chemical H intercalation method in N,N-dimethylformamide. The electrocatalytic performance of PdH-NDs is experimentally and theoretically correlated with the morphology and composition, which has demonstrated substantially enhanced electrochemical activity and stability for formate oxidation reaction and hydrogen evolution reaction in alkaline electrolyte compared with Pd nanodendrites. Density functional theory calculations suggest a downshift of the Pd d-band center of PdH-NDs due to the dominant Pd-H ligand effects that weaken the binding energies of the intermediate catalytic species and toxic carbon monoxide. The asymmetric formate electrolyzer based on bifunctional PdH-ND electrocatalysts is first constructed, which only requires a low voltage of 0.54 V at 10 mA cm^-2 for continuous H₂ generation. This study reveals significant insights about the morphology/composition-performance relationship for palladium hydrides with bifunctional electroactivity.

Light-Driven Alcohol Splitting by Heterogeneous Photocatalysis: Recent Advances, Mechanism and Prospects

Splitting of alcohols into hydrogen and corresponding carbonyl compounds, also called acceptorless alcohol dehydrogenation, is of great significance for both synthetic chemistry and hydrogen production. Light-Driven Alcohol Splitting (LDAS) by heterogeneous photocatalysis is a promising route to achieve such transformations, and it possesses advantages including high selectivity of the carbonyl compounds, extremely mild reaction conditions (room temperature and irradiation of visible light) and easy separation of the photocatalysts from the reaction mixtures. Because a variety of alcohols can be derived from biomass, LDAS can also be regarded as one of the most sustainable approaches for hydrogen production. In this Review, recent advances in the LDAS catalyzed by the heterogeneous photocatalysts are summarized, focusing on the mechanistic insights for the LDAS and aspects that influence the performance of the photocatalysts from viewpoints of metallic co-catalysts, semiconductors, and metal/semiconductor interfaces. In addition, challenges and prospects have been discussed in order to present a complete picture of this field.

Synthesis of Hydrophilic Phosphorus Ligands and Their Application in Aqueous-Phase Metal-Catalyzed Reactions

Transition metal-catalyzed reactions in aqueous media are experiencing a constant increase in interest. In homogenous catalysis the use of water as a solvent offers advantages in cost, safety, the possibility of two-phase catalysis and simplified separation strategies. In the life sciences, transition metal catalysis in aqueous systems enables the ligation or modification of biopolymers in buffer systems or even in their cellular environment. In biocatalysis, aqueous systems allow the simultaneous use of enzymes and transition metal catalysts in cascade reactions. The use of water-soluble phosphine ligands still represents the most reliable and popular strategy for transferring metal catalysts into the aqueous phase. This review summarizes the recent advancements in this field since 2009 and describes current synthetic strategies for the preparation of hydrophilic phosphines and phosphites. In addition, recent applications of transition metal catalysis in aqueous solvents using these hydrophilic ligands are presented.

Recent catalytic routes for the preparation and the upgrading of biomass derived furfural and 5-hydroxymethylfurfural

Furans represent one of the most important classes of intermediates in the conversion of non-edible lignocellulosic biomass into bio-based chemicals and fuels. At present, bio-furan derivatives are generally obtained from cellulose and hemicellulose fractions of biomass via the acid-catalyzed dehydration of their relative C6-C5 sugars and then converted into a wide range of products. Furfural (FUR) and 5-hydroxymethylfurfural (HMF) are surely the most used furan-based feedstocks since their chemical structure allows the preparation of various high-value-added chemicals. Among several well-established catalytic approaches, hydrogenation and oxygenation processes have been efficiently adopted for upgrading furans; however, harsh reaction conditions are generally required. In this review, we aim to discuss the conversion of biomass derived FUR and HMF through unconventional (transfer hydrogenation, photocatalytic and electrocatalytic) catalytic processes promoted by heterogeneous catalytic systems. The reaction conditions adopted, the chemical nature and the physico-chemical properties of the most employed heterogeneous systems in enhancing the catalytic activity and in driving the selectivity to desired products are presented and compared. At the same time, the latest results in the production of FUR and HMF through novel environmental friendly processes starting from lignocellulose as well as from wastes and by-products obtained in the processing of biomass are also overviewed.