Synergistic activity of the ninth and tenth FIII domains of human fibronectin depends upon structural stability

Dynamics of integrin α5β1, fibronectin, and their complex reveal sites of interaction and conformational change

Integrin α5β1 mediates cell adhesion to the extracellular matrix by binding fibronectin (Fn). Selectivity for Fn by α5β1 is achieved through recognition of an RGD motif in the 10th type III Fn domain (Fn10) and the synergy site in the ninth type III Fn domain (Fn9). However, details of the interaction dynamics are unknown. Here, we compared synergy-site and Fn-truncation mutations for their α5β1-binding affinities and stabilities. We also interrogated binding of the α5β1 ectodomain headpiece fragment to Fn using hydrogen-deuterium exchange (HDX) mass spectrometry to probe binding sites and sites of integrin conformational change. Our results suggest the synergistic effect of Fn9 requires both specific residues and a folded domain. We found some residues considered important for synergy are required for stability. Additionally, we show decreases in fibronectin HDX are localized to a synergy peptide containing contacting residues in two β-strands, an intervening loop in Fn9, and the RGD-containing loop in Fn10, indicative of binding sites. We also identified binding sites in the α5-subunit β-propeller domain for the Fn9 synergy site and in the β1-subunit βI domain for Fn10 based on decreases in α5β1 HDX. Interestingly, the dominant effect of Fn binding was an increase in α5β1 deuterium exchange distributed over multiple sites that undergo changes in conformation or solvent accessibility and appear to be sites where energy is stored in the higher-energy, open-integrin conformation. Together, our results highlight regions important for α5β1 binding to Fn and dynamics associated with this interaction.

Solubilization and Purification of α5β1 Integrin from Rat Liver for Reconstitution into Nanodiscs

Transmembrane proteins (or integral membrane proteins) are synthesized in the endoplasmic reticulum where most of them are core glycosylated prior to folding and in some cases assembly into quaternary structures. Correctly glycosylated, folded, and assembled transmembrane proteins are then shuttled to the Golgi apparatus for additional posttranslational modifications such as complex-type glycosylations, sulfation or proteolytic clipping. At the plasma membrane, the glycosylated extracellular domains are key to communicate with the cellular environment for a variety of functions, such as binding to the extracellular matrix for cell adhesion and migration, to neighboring cells for cell-cell interaction, or to extracellular components for nutrient uptake and cell signaling. Intracellular domains are essential to mediate signaling cascades, or to connect to cytosolic adaptors for internalization and intracellular compartmentalization. Despite its importance for the understanding of molecular mechanisms of transmembrane protein function, the determination of their structures has remained a challenging task. In recent years, their reconstitution in lipid nanodiscs in combination with high resolution cryo-electron microscopy has provided novel avenues to render this process more accessible. Here, we describe detailed protocols for the solubilization of heavily glycosylated α₅β₁ integrin from rat livers, its purification and reconstitution into nanodiscs. At the plasma membrane of many cells, including tumor metastases, this essential heterodimeric transmembrane protein mediates the communication between extracellular matrix and cytosolic cytoskeleton in processes of cell adhesion and migration. We expect that the protocols that are described here will provide new opportunities for the determination of the full structure of α₅β₁ integrin, as well as for the understanding of how interacting partners can regulate function and activity of this transmembrane protein.

Site-specific N-glycan profiles of α5 β1 integrin from rat liver

BACKGROUND INFORMATION

Like most other cell surface proteins, α₅ β₁ integrin is glycosylated, which is required for its various activities in ways that mostly remain to be determined.

RESULTS

Here, we have established the first comprehensive site-specific glycan map of α₅ β₁ integrin that was purified from a natural source, i.e., rat liver. This analysis revealed striking site selective variations in glycan composition. Complex bi, tri or tetraantennary N-glycans were predominant at various proportions at most potential N-glycosylation sites. A few of these sites were non-glycosylated or contained high mannose or hybrid glycans, indicating that early N-glycan processing was hindered. Almost all complex N-glycans had fully galactosylated and sialylated antennae. Moderate levels of core fucosylation and high levels of O-acetylation of NeuAc residues were observed at certain sites. An O-linked HexNAc was found in an EGF-like domain of β₁ integrin. The extensive glycan information that results from our study was projected onto a map of α₅ β₁ integrin that was obtained by homology modeling. We have used this model for the discussion of how glycosylation might be used in the functional cycle of α₅ β₁ integrin. A striking example concerns the involvement of glycan-binding galectins in the regulation of the molecular homeostasis of glycoproteins at the cell surface through the formation of lattices or endocytic pits according to the glycolipid-lectin (GL-Lect) hypothesis.

CONCLUSION

We expect that the glycoproteomics data of the current study will serve as a resource for the exploration of structural mechanisms by which glycans control α₅ β₁ integrin activity and endocytic trafficking.

SIGNIFICANCE

Glycosylation of α₅ β₁ integrin has been implicated in multiple aspects of integrin function and structure. Yet, detailed knowledge of its glycosylation, notably the specific sites of glycosylation, is lacking. Furthermore, the α₅ β₁ integrin preparation that was analyzed here is from a natural source, which is of importance as there is not a lot of literature in the field about the glycosylation of 'native' glycoproteins. This article is protected by copyright. All rights reserved.

The Molecular Dance of Fibronectin: Conformational Flexibility Leads to Functional Versatility

Fibronectin, a large multimodular protein and one of the major fibrillar components of the extracellular matrix, has been the subject of study for many decades and plays critical roles in embryonic development and tissue homeostasis. Moreover, fibronectin has been implicated in the pathology of many diseases, including cancer, and abnormal depositions of fibronectin have been identified in a number of amyloid and nonamyloid lesions. The ability of fibronectin to carry all these diverse functionalities depends on interactions with a large number of molecules, including adhesive and signaling cell surface receptors, other components of the extracellular matrix, and growth factors and cytokines. The regulation and integration of such large number of interactions depends on the modular architecture of fibronectin, which allows a large number of conformations, exposing or destroying different binding sites. In this Review, we summarize the current knowledge regarding the conformational flexibility of fibronectin, with an emphasis on how it regulates the ability of fibronectin to interact with various signaling molecules and cell-surface receptors and to form supramolecular assemblies and fibrillar structures.

Dense Poly(ethylene glycol) Brushes Reduce Adsorption and Stabilize the Unfolded Conformation of Fibronectin

Polymer brushes, in which polymers are end-tethered densely to a grafting surface, are commonly proposed for use as stealth coatings for various biomaterials. However, although their use has received considerable attention, a mechanistic understanding of the impact of brush properties on protein adsorption and unfolding remains elusive. We investigated the effect of the grafting density of poly(ethylene glycol) (PEG) brushes on the interactions of the brush with fibronectin (FN) using high-throughput single-molecule tracking methods, which directly measure protein adsorption and unfolding within the brush. We observed that, as grafting density increased, the rate of FN adsorption decreased; however, surface-adsorbed FN unfolded more readily, and unfolded molecules were retained on the surface for longer residence times relative to those of folded molecules. These results, which are critical for the rational design of PEG brushes, suggest that there is a critical balance between protein adsorption and conformation that underlies the utility of such brushes in physiological environments.

Molecular Basis of Laminin-Integrin Interactions

Laminins are composed of three polypeptide chains, designated as α, β, and γ. The C-terminal region of laminin heterotrimers, containing coiled-coil regions, short tails, and laminin globular (LG) domains, is necessary and sufficient for binding to integrins, which are the major laminin receptor class. Laminin recognition by integrins critically requires the α chain LG domains and a glutamic acid residue of the γ chain at the third position from the C-terminus. Furthermore, the C-terminal region of the β chain contains a short amino acid sequence that modulates laminin affinity for integrins. Thus, all three of the laminin chains act cooperatively to facilitate integrin binding. Mammals possess 5 α (α1-5), 3 β (β1-3), and 3 γ (γ1-3) chains, combinations of which give rise to 16 distinct laminin isoforms. Each isoform is expressed in a tissue-specific and developmental stage-specific manner, exerting its functions through binding of integrins. In this review, we detail the current knowledge surrounding the molecular basis and physiological relevance of specific interactions between laminins and integrins, and describe the mechanisms underlying laminin action through integrins.

Human epidermal keratinocyte cell response on integrin-specific artificial extracellular matrix proteins

Cell-matrix interactions play critical roles in regulating cellular behavior in wound repair and regeneration of the human skin. In particular, human skin keratinocytes express several key integrins such as alpha5beta1, alpha3beta1, and alpha2beta1 for binding to the extracellular matrix (ECM) present in the basement membrane in uninjured skin. To mimic these key integrin-ECM interactions, artificial ECM (aECM) proteins containing functional domains derived from laminin 5, type IV collagen, fibronectin, and elastin are prepared. Human skin keratinocyte cell responses on the aECM proteins are specific to the cell-binding domain present in each construct. Keratinocyte attachment to the aECM protein substrates is also mediated by specific integrin-material interactions. In addition, the aECM proteins are able to support the proliferation of keratinocyte stem cells, demonstrating their promise for use in skin tissue engineering.

Enhanced integrin mediated signaling and cell cycle progression on fibronectin mimetic peptide amphiphile monolayers

In recent years, a variety of biomimetic constructs have emerged which mimic the bioactive sequences found in the natural extracellular matrix (ECM) proteins such as fibronectin (FN) that promote cell adhesion as well as proliferation on artificially functionalized interfaces. Much interest lies in investigating the ability of the ECM mimetic materials in regulating a number of vital cell functions including differentiation, gene expression, migration, and proliferation. A peptide amphiphile PR_b containing both the cell adhesive GRGDSP and synergistic PHSRN peptide sequences was developed in our group that was shown to support enhanced cell proliferation and ECM FN secretion as compared to GRGDSP and FN functionalized interfaces. In this study, we have investigated the binding affinity of the PR_b peptide ligand with the FN cell surface receptor, the α(5)β(1) integrin. We compared PR_b functionalized surfaces with FN and BSA coated surfaces and GRGDSP functionalized surfaces in terms of promoting intracellular signaling cascades that are essential for enhanced cellular activity. Specifically, we studied the phosphorylation of focal adhesion kinase (FAK) at tyrosine residues Y397 and Y576 and the formation of cyclin D1, both of which are intracellular markers of integrin mediated attachment of cells, signaling pathways, and progression of cell cycle. FAK and cyclin D1 encourage enhanced cell proliferation, differentiation, and gene expression. Our results show that the PR_b peptide ligand has a specific and strong binding affinity for the α(5)β(1) integrin with a dissociation constant of 76.3 ± 6.3 nM. The PR_b peptide ligands supported enhanced FAK phosphorylation activity and increased cyclin D1 formation as compared to the widely used GRGDSP ligand, the native protein FN (positive control), and BSA nonadhesive surfaces (negative control). These results encourage the use of the FN mimetic PR_b peptide in functionalizing biomaterials for potential tissue engineering and therapeutic applications.

Interaction of β-sheet folds with a gold surface

The adsorption of proteins on inorganic surfaces is of fundamental biological importance. Further, biomedical and nanotechnological applications increasingly use interfaces between inorganic material and polypeptides. Yet, the underlying adsorption mechanism of polypeptides on surfaces is not well understood and experimentally difficult to analyze. Therefore, we investigate here the interactions of polypeptides with a gold(111) surface using computational molecular dynamics (MD) simulations with a polarizable gold model in explicit water. Our focus in this paper is the investigation of the interaction of polypeptides with β-sheet folds. First, we concentrate on a β-sheet forming model peptide. Second, we investigate the interactions of two domains with high β-sheet content of the biologically important extracellular matrix protein fibronectin (FN). We find that adsorption occurs in a stepwise mechanism both for the model peptide and the protein. The positively charged amino acid Arg facilitates the initial contact formation between protein and gold surface. Our results suggest that an effective gold-binding surface patch is overall uncharged, but contains Arg for contact initiation. The polypeptides do not unfold on the gold surface within the simulation time. However, for the two FN domains, the relative domain-domain orientation changes. The observation of a very fast and strong adsorption indicates that in a biological matrix, no bare gold surfaces will be present. Hence, the bioactivity of gold surfaces (like bare gold nanoparticles) will critically depend on the history of particle administration and the proteins present during initial contact between gold and biological material. Further, gold particles may act as seeds for protein aggregation. Structural re-organization and protein aggregation are potentially of immunological importance.

Plasma-micropatterning of albumin nanoparticles: Substrates for enhanced cell-interactive display of ligands

The authors demonstrate a novel, efficient, and widely applicable approach to direct the patterning of ligand-functionalized organic nanoparticles derived from albumin on nonconductive, biodegradable polymeric substrates. In contrast to traditional deposition methods for inorganic nanoparticles, the approach involves oxygen plasma treatment of spatially restricted regions on a nonbiopermissive polymer. Albumin nanoparticles conjugated with a truncated fragment of fibronectin containing the Arg-Gly-Asp domain were successfully patterned and used as templates to elicit adhesion and spreading of human mesenchymal stem cells and fibroblasts. Attachment and spreading of both cell types into the plasma-exposed polymer areas was considerably more pronounced than with the ligand alone. The authors hypothesize that the underlying mechanism is oxygen plasma treatment-induced selective enhancement of ligand exposure from the deposited functionalized nanoparticles, which facilitates ligand receptor clustering at the cell membrane. The results highlight a promising nanoscale approach to modulate ligand presentation and spatially direct cell attachment and phenotypic behaviors.

Nanomaterials can dynamically steer cell responses to biological ligands

Traditional tissue regeneration approaches to activate cell behaviors on biomaterials rely on the use of extracellular-matrix-based or soluble growth-factor cues. In this article, a novel approach is highlighted to dynamically steer cellular phenomena such as cell motility based on nanoscale substratum features of biological ligands. Albumin-derived nanocarriers (ANCs) with variable nanoscale-size features are functionalized with fibronectin III9-10 matrix ligands, and their effects on primary human keratinocyte activation are investigated. The presentation of fibronectin fragments from ANCs significantly enhances cell migration as compared to free ligands at equivalent concentrations. Notably, cell migration is influenced by the size of the underlying ANCs even for variably sized ANCs covered in comparable levels of fibronectin fragment. For equivalent ligand concentrations, cell migration on the smaller-sized ANCs (30 and 50 nm) is significantly enhanced as compared to that on larger-sized ANCs (75 and 100 nm). In contrast, the enhancement of cell migration on nanocarriers is abolished by the use of immobilized, biofunctionalized ANCs, indicating that "dynamic" nanocarrier internalization events underlie the role of nanocarrier geometry on the differential regulation of cell migration kinetics. Uptake studies using fluorescent ANCs indicate that larger-sized ANCs cause delayed endocytic kinetics and hence could present barriers for internalization during the cell adhesion and motility processes. Motile cells exhibit diminished migration upon exposure to clathrin inhibitors, but not caveolin inhibitors, suggesting the role of clathrin-mediated endocytosis in facilitating cell migratory responsiveness to the nanocarriers. Overall, a monotonic relationship is found between the nanocarrier cytointernalization rate and the cell migration rate, suggesting the possibility of designing biointerfacial features for the dynamic control of cell migration. Thus, the functionalization of a mobile nanocarrier by a biorelevant ligand can be used to sensitize cellular motility activation to the adhesion ligands, and such nanocarrier interfaces can dynamically attune cell migration kinetics by modulating the uptake of the ligand-nanocarrier complex via nanocarrier size.

Atomic force microscopy evidence for conformational changes of fibronectin adsorbed on unmodified and sulfonated polystyrene surfaces

The effect of polystyrene surface polarity on the conformation of adsorbed fibronectin (FN) has been studied with atomic force microscopy. We demonstrated that bare sulfonated and nonsulfonated polystyrene surfaces featured similar topographies. After the FN adsorption, direct comparison of both types of substrata revealed drastically different topographies, roughness values, and also cell-adhesive properties. This was interpreted in terms of FN conformational changes induced by the surface polarity. At high-solute FN concentrations the multilayer FN adsorption took place resulting, for the sulfonated substratum, in an increase of surface roughness, whereas for the nonsulfonated one the roughness was approximately stable. Conversely, the FN conformation characteristic for the first saturative layer tended to be conserved in the consecutive layers, as evidenced by height histograms. The height of individual FN molecules indicated, consonantly with the derived thickness of the adsorbed protein layer (the latter value being 1.4 nm and 0.6 nm, respectively, for an unmodified and sulfonated polystyrene surface), that molecules are flattened on polar surfaces and more compact on nonsulfonated ones. It was also demonstrated that the FN adsorption and conformation on polymeric substrata, and hence the resultant cell-adhesive properties, depended on the chemistry of the original surface rather than on its topography. Our results also demonstrated the ability of surface polarity to influence the protein conformation and its associated biological activity.

Using self-assembled monolayers to model cell adhesion to the 9th and 10th type III domains of fibronectin

Most mammalian cells must adhere to the extracellular matrix (ECM) to maintain proper growth and development. Fibronectin is a predominant ECM protein that engages integrin cell receptors through its Arg-Gly-Asp (RGD) and Pro-His-Ser-Arg-Asn (PHSRN) peptide binding sites. To study the roles these motifs play in cell adhesion, proteins derived from the 9th (containing PHSRN) and 10th (containing RGD) type III fibronectin domains were engineered to be in frame with cutinase, a serine esterase that forms a site-specific, covalent adduct with phosphonate ligands. Self-assembled monolayers (SAMs) that present phosphonate ligands against an inert background of tri(ethylene glycol) groups were used as model substrates to immobilize the cutinase-fibronectin fusion proteins. Baby hamster kidney cells attached efficiently to all protein surfaces, but only spread efficiently on protein monolayers containing the RGD peptide. Cells on RGD-containing protein surfaces also displayed defined focal adhesions and organized cytoskeletal structures compared to cells on PHSRN-presenting surfaces. Cell attachment and spreading were shown to be unaffected by the presence of PHSRN when compared to RGD alone on SAMs presenting higher densities of protein, but PHSRN supported an increased efficiency in cell attachment when presented at low protein densities with RGD. Treatment of suspended cells with soluble RGD or PHSRN peptides revealed that both peptides were able to inhibit the attachment of FN10 surfaces. These results support a model wherein PHSRN and RGD bind competitively to integrins--rather than a two-point synergistic interaction--and the presence of PHSRN serves to increase the density of ligand on the substrate and therefore enhance the sticking probability of cells during attachment.

The C-terminal region of laminin beta chains modulates the integrin binding affinities of laminins

Laminins are major cell-adhesive proteins in basement membranes that are capable of binding to integrins. Laminins consist of three chains (alpha, beta, and gamma), in which three laminin globular modules in the alpha chain and the Glu residue in the C-terminal tail of the gamma chain have been shown to be prerequisites for binding to integrins. However, it remains unknown whether any part of the beta chain is involved in laminin-integrin interactions. We compared the binding affinities of pairs of laminin isoforms containing the beta1 or beta2 chain toward a panel of laminin-binding integrins, and we found that beta2 chain-containing laminins (beta2-laminins) bound more avidly to alpha3beta1 and alpha7X2beta1 integrins than beta1 chain-containing laminins (beta1-laminins), whereas alpha6beta1, alpha6beta4, and alpha7X1beta1 integrins did not show any preference toward beta2-laminins. Because alpha3beta1 contains the "X2-type" variable region in the alpha3 subunit and alpha6beta1 and alpha6beta4 contain the "X1-type" region in the alpha6 subunit, we hypothesized that only integrins containing the X2-type region were capable of discriminating between beta1-laminins and beta2-laminins. In support of this possibility, a putative X2-type variant of alpha6beta1 was produced and found to bind preferentially to beta2-laminins. Production of a series of swap mutants between the beta1 and beta2 chains revealed that the C-terminal 20 amino acids in the coiled-coil domain were responsible for the enhanced integrin binding by beta2-laminins. Taken together, the results provide evidence that the C-terminal region of beta chains is involved in laminin recognition by integrins and modulates the binding affinities of laminins toward X2-type integrins.

Assay to mechanically tune and optically probe fibrillar fibronectin conformations from fully relaxed to breakage

In response to growing needs for quantitative biochemical and cellular assays that address whether the extracellular matrix (ECM) acts as a mechanochemical signal converter to co-regulate cellular mechanotransduction processes, a new assay is presented where plasma fibronectin fibers are manually deposited onto elastic sheets, while force-induced changes in protein conformation are monitored by fluorescence resonance energy transfer (FRET). Fully relaxed assay fibers can be stretched at least 5-6 fold, which involves Fn domain unfolding, before the fibers break. In native fibroblast ECM, this full range of stretch-regulated conformations coexists in every field of view confirming that the assay fibers are physiologically relevant model systems. Since alterations of protein function will directly correlate with their extension in response to force, the FRET vs. strain curves presented herein enable the mapping of fibronectin strain distributions in 2D and 3D cell cultures with high spatial resolution. Finally, cryptic sites for fibronectin's N-terminal 70-kD fragment were found to be exposed at relatively low strain, demonstrating the assay's potential to analyze stretch-regulated protein-protein interactions.

Interdomain mobility and conformational stability of type III fibronectin domain pairs control surface adsorption, desorption and unfolding

The 9th-10th type III fibronectin domain pair (9-10FNIII) has found widespread use as a biomimetic surface for cell adhesion. However, the effect of mutations to 9-10FNIII on its surface adsorption characteristics have not been investigated. Here we address this issue using total internal reflection fluorescence (TIRF) and circular dichroism spectroscopy, comparing two conformationally stable 9-10FNIII mutants against the wild type. Desorption of the 9-10FNIII mutants from the silica surface was minimal in comparison to desorption of 9-10FNIII. The extent and rate of protein desorption from silica was empirically matched by loss of secondary structure upon adsorption, with only the spectrum for 9-10FNIII showing extensive loss of the beta-sandwich fold. For the proteins adsorbed to hydrophobic surfaces, only the CD spectra for the 9-10FNIII mutant constrained via an interdomain disulphide bridge showed similarity with the corresponding solution structure. Since the binding of 9-10FNIII to integrin alpha5beta1 is highly dependent on the relative spatial arrangement of the two domains, we suggest that the observed differences in cell adhesion and spreading on wild type 9-10FNIII and mutants may in part be attributed to the extent of protein desorption and unfolding at the surface.

αVβ6 Is a Novel Receptor for Human Fibrillin-1

Human fibrillin-1, the major structural protein of connective tissue 10-12 nm microfibrils, contains multiple calcium binding epidermal growth factor-like domains interspersed with transforming growth factor beta-binding protein-like (TB) domains. TB4 contains a flexible RGD loop that mediates cell adhesion via alphaVbeta3 and alpha5beta1 integrins. This study identifies integrin alphaVbeta6 as a novel cellular receptor for fibrillin-1 with a K(d) of approximately 0.45 mum. Analyses of this interaction by surface plasmon resonance and immunocytochemistry reveal different module requirements for alphaVbeta6 activation compared with those of alphaVbeta3, suggesting that a covalent linkage of an N-terminal calcium binding epidermal growth factor-like domain to TB4 can modulate alphaV integrin binding specificity. Furthermore, our data suggest alpha5beta1 is a low affinity fibrillin-1 receptor (K(d) > 1 mum), thus providing a molecular explanation for the different alpha5beta1 distribution patterns seen when human keratinocytes and fibroblasts are plated on recombinant fibrillin fragments versus those derived from the physiological ligand fibronectin. Non-focal contact distribution of alpha5beta1 suggests that its engagement by fibrillin-1 may elicit a lesser degree and/or different type of intracellular signaling compared with that seen with a high affinity ligand.

The “Linker” Region (Amino Acids 38-47) of the Disintegrin Elegantin Is a Novel Inhibitory Domain of Integrin α5β1-Dependent Cell Adhesion on Fibronectin

Disintegrins are a family of potent inhibitors of cell-cell and cell-matrix adhesion. In this study we have identified a region of the disintegrin elegantin, termed the "linker domain" (amino acids 38-47), with inhibitory activity toward alpha(5)beta(1)-mediated cell adhesion on fibronectin (Fn). Using a chimeric structure-function approach in which sequences of the functionally distinct disintegrin kistrin were introduced into the elegantin template at targeted sites, a loss of inhibitory function toward alpha(5)beta(1)-mediated adhesion on Fn was observed when the elegantin linker domain was substituted. Subsequent analysis comparing the inhibitory efficacies of the panel of elegantin-kistrin chimeras toward CHO alpha(5) cell adhesion on recombinant Fn III(6-10) fragments showed that the loss of inhibitory activity associated with the disruption of the elegantin linker domain was dependent upon the presence of a functional Fn III(9) synergy site within the Fn III(6-10) substrate. This suggested that the elegantin linker domain inhibits primarily the activity of the Fn synergy domain in promoting alpha(5)beta(1) integrin-mediated cell adhesion. Construction of a cyclic peptide corresponding to the entire region of the elegantin linker domain showed that this domain has intrinsic alpha(5)beta(1) inhibitory activity comparable with the activity of the RGDS peptide. These data demonstrate a novel biological function for a disintegrin domain that antagonizes integrin-mediated cell adhesion.

Survey of the year 2003 commercial optical biosensor literature

In the year 2003 there was a 17% increase in the number of publications citing work performed using optical biosensor technology compared with the previous year. We collated the 962 total papers for 2003, identified the geographical regions where the work was performed, highlighted the instrument types on which it was carried out, and segregated the papers by biological system. In this overview, we spotlight 13 papers that should be on everyone's 'must read' list for 2003 and provide examples of how to identify and interpret high-quality biosensor data. Although we still find that the literature is replete with poorly performed experiments, over-interpreted results and a general lack of understanding of data analysis, we are optimistic that these shortcomings will be addressed as biosensor technology continues to mature.

Interdomain tilt angle determines integrin-dependent function of the ninth and tenth FIII domains of human fibronectin

Integrins are an important family of signaling receptors that mediate diverse cellular processes. The binding of the abundant extracellular matrix ligand fibronectin to integrins alpha(5)beta(1) and alpha(v)beta(3) is known to depend upon the Arg-Gly-Asp (RGD) motif on the tenth fibronectin FIII domain. The adjacent ninth FIII domain provides a synergistic effect on RGD-mediated integrin alpha(5)beta(1) binding and downstream function. The precise molecular basis of this synergy remains elusive. Here we have dissected further the function of FIII9 in integrin binding by analyzing the biological activity of the FIII9-10 interdomain interface variants and by determining their structural and dynamic properties in solution. We demonstrate that the contribution of FIII9 to both alpha(5)beta(1) and alpha(v)beta(3) binding and downstream function critically depends upon the interdomain tilt between the FIII9 and FIII10 domains. Our data suggest that modulation of integrin binding by FIII9 may arise in part from its steric properties that determine accessibility of the RGD motif. These findings have wider implications for mechanisms of integrin-ligand binding in the physiological context.

Structure of the integrin binding fragment from fibrillin-1 gives new insights into microfibril organization

Human fibrillin-1, the major structural protein of extracellular matrix (ECM) 10-12 nm microfibrils, is dominated by 43 calcium binding epidermal growth factor-like (cbEGF) and 7 transforming growth factor beta binding protein-like (TB) domains. Crystal structures reveal the integrin binding cbEGF22-TB4-cbEGF23 fragment of human fibrillin-1 to be a Ca(2+)-rigidified tetragonal pyramid. We suggest that other cbEGF-TB pairs within the fibrillins may adopt a similar orientation to cbEGF22-TB4. In addition, we have located a flexible RGD integrin binding loop within TB4. Modeling, cell attachment and spreading assays, immunocytochemistry, and surface plasmon resonance indicate that cbEGF22 bound to TB4 is a requirement for integrin activation and provide insight into the molecular basis of the fibrillin-1 interaction with alphaVbeta3. In light of our data, we propose a novel model for the assembly of the fibrillin microfibril and a mechanism to explain its extensibility.

Controlled release of the fibronectin central cell binding domain from polymeric microspheres

Non-ionic surfactants have been employed as alternatives to PVA for the emulsification-encapsulation of a conformationally labile protein (FIII9'-10) into PLGA microspheres. FIII9'-10 was encapsulated using a w/o/w double emulsification-evaporation technique and the microspheres fabricated were characterized by SEM and CLSM. The peptide backbone integrity of FIII9'-10 was assayed by SDS-PAGE and the degree of unfolding of FIII9'-10 following emulsification-encapsulation was assessed using a fibroblast cell-attachment assay. The encapsulation efficiency for FIII9'-10 was 25% when using PVA, compared to 50-60% when using Igepal CA-630 or Triton-X100, with values below for the other surfactants. FIII9'-10 released from microspheres promoted cell attachment in a concentration-dependent manner, only Igepal CA-630 and Triton X-100 maintaining near-maximal cell attachment, indicating that the conformation of the relatively unstable FIII9' domain was preserved. All non-ionic surfactants reduced microsphere surface porosity, compared to PVA, and an increasing surface rugosity (leading to minor 'ridges') could be correlated with decreasing surfactant HLB. Low surface porosities did not effect the diffusion of FIII9'-10 from the microspheres' internal pores in a 'burst release', as may have been imagined. In summary, non-ionic surfactants should be considered over PVA for the maintenance of biological activity of conformationally labile proteins during encapsulation.

Urea-Induced Sequential Unfolding of Fibronectin: A Fluorescence Spectroscopy and Circular Dichroism Study

Fibronectin (FN) is an extracellular matrix (ECM) protein found soluble in corporal fluids or as an insoluble fibrillar component incorporated in the ECM. This phenomenon implicates structural changes that expose FN binding sites and activate the protein to promote intermolecular interactions with other FN. We have investigated, using fluorescence and circular dichroism spectroscopy, the unfolding process of human fibronectin induced by urea in different ionic strength conditions. At any ionic strength, the equilibrium unfolding data are well described by a four-state equilibrium model N <= => I(1) <= =>I(2) <= => U. Fitting this model to experimental values, we have determined the free energy change for the different steps. We found that the N <= => I(1) transition corresponds to a free energy of 10.5 +/- 0.4 kcal/mol. Comparable values of free energy change are generally associated with a partial unfolding of the type III domain. For the I(1) <= => I(2) transition, the free energy change is 7.6 +/- 0.4 kcal/mol at low ionic strength but is twice as low at high ionic strength. This result is consistent with observations indicating that the complete unfolding of the type III domain from partially unfolded forms necessitates about 5 kcal/mol. The third step, I(2) <= => U, which leads to the complete unfolding of fibronectin, corresponds to a free energy change of 14.4 +/- 0.9 kcal/mol at low ionic strength whereas this energy is again twice as low under high ionic strength conditions. This hierarchical unfolding of fibronectin, as well as the stability of the different intermediates controlled by ionic strength demonstrated here, could be important for the understanding of activation of the matrix assembly.

Structure of an integrin-ligand complex deduced from solution x-ray scattering and site-directed mutagenesis

The structural basis of the interaction of integrin heterodimers with their physiological ligands is poorly understood. We have used solution x-ray scattering to visualize the head region of integrin alpha 5 beta 1 in an inactive (Ca2+-occupied) state, and in complex with a fragment of fibronectin containing the RGD and synergy recognition sequences. Shape reconstructions of the data have been interpreted in terms of appropriate molecular models. The scattering data suggest that the head region undergoes no gross conformational changes upon ligand binding but do lend support to a proposed outward movement of the hybrid domain in the beta subunit. Fibronectin is observed to bind across the top of the head region, which contains an alpha subunit beta-propeller and a beta subunit vWF type A domain. The model of the complex indicates that the synergy region binds on the side of the beta-propeller domain. In support of this suggestion, mutagenesis of a prominent loop region on the side of the propeller identifies two residues (Tyr208 and Ile210) involved in recognition of the synergy region. Our data provide the first view of a complex between an integrin and a macromolecular ligand in solution, at a nominal resolution of approximately 10 A.

Structure of integrin alpha5beta1 in complex with fibronectin

The membrane-distal headpiece of integrins has evolved to specifically bind large extracellular protein ligands, but the molecular architecture of the resulting complexes has not been determined. We used molecular electron microscopy to determine the three-dimensional structure of the ligand-binding headpiece of integrin alpha5beta1 complexed with fragments of its physiological ligand fibronectin. The density map for the unliganded alpha5beta1 headpiece shows a 'closed' conformation similar to that seen in the alphaVbeta3 crystal structure. By contrast, binding to fibronectin induces an 'open' conformation with a dramatic, approximately 80 degrees change in the angle of the hybrid domain of the beta subunit relative to its I-like domain. The fibronectin fragment binds to the interface between the beta-propeller and I-like domains in the integrin headpiece through the RGD-containing module 10, but direct contact of the synergy-region-containing module 9 to integrin is not evident. This finding is corroborated by kinetic analysis of real-time binding data, which shows that the synergy site greatly enhances k(on) but has little effect on the stability or k(off) of the complex.