Occupational Co-exposures to Multiple Chemical Agents from Workplace Measurements by the US Occupational Safety and Health Administration

A messaging standard for environmental inspections: is it time?

Environmental health (EH) services in the United States lag behind other areas of public health and health care with respect to information system interoperability and data sharing. This is partly due to an absence of well-defined use cases, the lack of direct economic drivers and resources to improve, the multiple jurisdictional elements that govern EH services across the United States, and no central organization to drive modernization of EH data. We summarize the status of EH information systems; argue for greater interoperability, including use cases for a messaging standard for environmental inspections; and present recommendations to better align EH services and data modernization efforts currently underway in other areas of public health.

Prerequisite for Imputing Non-detects among Airborne Samples in OSHA's IMIS Databank: Prediction of Sample's Volume

INTRODUCTION

The US Integrated Management Information System (IMIS) contains workplace measurements collected by Occupational Safety and Health Administration (OSHA) inspectors. Its use for research is limited by the lack of record of a value for the limit of detection (LOD) associated with non-detected measurements, which should be used to set censoring point in statistical analysis. We aimed to remedy this by developing a predictive model of the volume of air sampled (V) for the non-detected results of airborne measurements, to then estimate the LOD using the instrument detection limit (IDL), as IDL/V.

METHODS

We obtained the Chemical Exposure Health Data from OSHA's central laboratory in Salt Lake City that partially overlaps IMIS and contains information on V. We used classification and regression trees (CART) to develop a predictive model of V for all measurements where the two datasets overlapped. The analysis was restricted to 69 chemical agents with at least 100 non-detected measurements, and calculated sampling air flow rates consistent with workplace measurement practices; undefined types of inspections were excluded, leaving 412,201/413,515 records. CART models were fitted on randomly selected 70% of the data using 10-fold cross-validation and validated on the remaining data. A separate CART model was fitted to styrene data.

RESULTS

Sampled air volume had a right-skewed distribution with a mean of 357 l, a median (M) of 318, and ranged from 0.040 to 1868 l. There were 173,131 measurements described as non-detects (42% of the data). For the non-detects, the V tended to be greater (M = 378 l) than measurements characterized as either 'short-term' (M = 218 l) or 'long-term' (M = 297 l). The CART models were complex and not easy to interpret, but substance, industry, and year were among the top three most important classifiers. They predicted V well overall (Pearson correlation (r) = 0.73, P < 0.0001; Lin's concordance correlation (rc) = 0.69) and among records captured as non-detects in IMIS (r = 0.66, P < 0.0001l; rc = 0.60). For styrene, CART built on measurements for all agents predicted V among 569 non-detects poorly (r = 0.15; rc = 0.04), but styrene-specific CART predicted it well (r = 0.87, P < 0.0001; rc = 0.86).

DISCUSSION

Among the limitations of our work is the fact that samples may have been collected on different workers and processes within each inspection, each with its own V. Furthermore, we lack measurement-level predictors because classifiers were captured at the inspection level. We did not study all substances that may be of interest and did not use the information that substances measured on the same sampling media should have the same V. We must note that CART models tend to over-fit data and their predictions depend on the selected data, as illustrated by contrasting predictions created using all data vs. limited to styrene.

CONCLUSIONS

We developed predictive models of sampled air volume that should enable the calculation of LOD for non-detects in IMIS. Our predictions may guide future work on handling non-detects in IMIS, although it is advisable to develop separate predictive models for each substance, industry, and year of interest, while also considering other factors, such as whether the measurement evaluated long-term or short-term exposure.

Risks of Leukemia in Various Industrial Groups in Korea: A Retrospective National Cohort Study

It is known that occupational exposure to specific agents is associated with leukemia. However, whether the occupational risks of leukemia differ among various industrial groups remains unclear. Therefore, the purpose of this study was to elucidate the occupational risks of leukemia among different worker groups by industry. Data for a total of 11,050,398 people from the National Health Insurance System's claim data from 2007 to 2015 were analyzed. By cohort inclusion of workers whose industry had not changed for three years and with total workers as a control group, the risk for a specific industry group was expressed as an age-standardized incidence ratio (SIR). Among groups by industry, 'Manufacture of motor vehicles and engines for motor vehicles', 'Sale of motor vehicle parts and accessories', and 'Personal care services' showed significantly higher SIRs. In division analysis, the 'Manufacture of other machinery and equipment' and 'Waste collection, treatment and disposal activities' divisions showed significantly higher SIRs than other divisions. We identified an increased risk of leukemia in workers of certain industries in Korea. Based on the results of this study, it is necessary to create a policy to protect workers at risk of leukemia. Various additional studies are needed to protect workers by revealing more precise relationships between individual hazardous substances, processes, and leukemia.

Application of Pattern Mining Methods to Assess Exposures to Multiple Airborne Chemical Agents in Two Large Occupational Exposure Databases from France

Surveys of the French working population estimate that approximately 15% of all workers may be exposed to at least three different chemical agents, but the most prevalent coexposure situations and their associated health risks remain relatively understudied. To characterize occupational coexposure situations in France, we extracted personal measurement data from COLCHIC and SCOLA, two large administrative occupation exposure databases. We selected 118 chemical agents that had ≥100 measurements with detected concentrations over the period 2010-2019, including 31 carcinogens (IARC groups 1, 2A, and 2B). We grouped measurements by work situations (WS, combination of sector, occupation, task, and year). We characterized the mixtures across WS using frequent itemset mining and association rules mining. The 275,213 measurements extracted came from 32,670 WS and encompassing 4692 unique mixtures. Workers in 32% of all WS were exposed to ≥2 agents (median 3 agents/WS) and 13% of all WS contained ≥2 carcinogens (median 2 carcinogens/WS). The most frequent coexposures were ethylbenzene-xylene (1550 WS), quartz-cristobalite (1417 WS), and toluene-xylene (1305 WS). Prevalent combinations of carcinogens also included hexavalent chromium-lead (368 WS) and benzene-ethylbenzene (314 WS). Wood dust (6% of WS exposed to at least one other agent) and asbestos (8%) had the least amount of WS coexposed with other agents. Tasks with the highest proportions of coexposure to carcinogens include electric arc welding (37% of WS with coexposure), polymerization and distillation (34%), and construction drilling and excavating (34%). Overall, the coexposure to multiple chemical agents, including carcinogens, was highly prevalent in the databases, and should be taken into account when assessing exposure risks in the workplace.

MiXie, an Online Tool for Better Health Assessment of Workers Exposed to Multiple Chemicals

There is increasing concern for workers facing multiple chemical exposure. The accumulation of information on occupational conditions indicates the need to incorporate the concept of multiple exposures in the risk assessment process and to develop tools for assessing the potential impacts of multiple exposures on workers’ health. Our objective is to describe the MiXie online decision-making tool that can be used to assess the risk of exposure to multiple chemicals. The description includes the development of MiXie, the structure of its toxicological database according to the target organ or the mode of action, and the algorithm for quantitative analysis of a mixture. Two case studies of its use in evaluating the risks of multiple exposures in real workplace situations are presented. The case study in the printing industry showed increased risk for four toxicological classes (central nervous system damage, ocular damage, skin damage, and ototoxicity) associated with co-exposure to four chemicals during maintenance operations. The MiXie analysis also showed the presence of carcinogenic substances in the mixture and a risk to the development of the foetus. The case study in nail salons showed the presence of carcinogenic and sensitizing chemicals and an increased risk to upper airways. MiXie helps preventers evaluate the possible additive effects of mixtures, providing an easy-to-read diagnosis to identify risks incurred by co-exposed employees. In addition, MiXie identifies risky occupational situations that would go unnoticed without a multiple substance approach.

The impact of vinyl chloride exposure on the health of Italian workers: an evaluation from SIREP compliance data

The aim of the study is to investigate exposures to vinyl chloride monomer (VCM) at workplace in Italy and the related burden of diseases. Measurements data was collected from a nation-wide occupational exposure registry (SIREP, 1996-2016). Potentially exposed workers were estimated for some industrial sectors. Concurrent exposures were investigated using cluster analysis. Proportionate mortality ratios were calculated linking data to national mortality statistics (2005-2015). Overall 8,460 measurements were analyzed. Most exposures occurred in the manufacture of chemicals and plastic products. A total of 12,148 workers potentially exposed was estimated (64% male). Concurrent exposures were detected frequently (83%). An elevated proportion of deaths for liver cancer was found in male exposed workers. Although VCM is a known carcinogen for humans, there are still many exposure situations, albeit at low doses, in the chemical and plastic industries.