New developments in sustained release drug delivery for the treatment of intraocular disease

In Situ Formation of Injectable Gelatin Methacryloyl (GelMA) Hydrogels for Effective Intraocular Delivery of Triamcinolone Acetonide

A novel drug delivery system designed for intraocular injection, gelatin methacryloyl (GelMA), has attracted much attention due to its sustained-release character and low cytotoxicity. We aimed to explore the sustained drug effect of GelMA hydrogels coupled with triamcinolone acetonide (TA) after injection into the vitreous cavity. The GelMA hydrogel formulations were characterized using scanning electron microscopy, swelling measurements, biodegradation, and release studies. The biological safety effect of GelMA on human retinal pigment epithelial cells and retinal conditions was verified by in vitro and in vivo experiments. The hydrogel exhibited a low swelling ratio, resistance to enzymatic degradation, and excellent biocompatibility. The swelling properties and in vitro biodegradation characteristics were related to the gel concentration. Rapid gel formation was observed after injection, and the in vitro release study confirmed that TA-hydrogels have slower and more prolonged release kinetics than TA suspensions. In vivo fundus imaging, optical coherence tomography measurements of retinal and choroid thickness, and immunohistochemistry did not reveal any apparent abnormalities of retinal or anterior chamber angle, and ERG indicated that the hydrogel had no impact on retinal function. The GelMA hydrogel implantable intraocular device exhibited an extended duration, in situ polymerization, and support cell viability, making it an attractive, safe, and well-controlled platform for treating the posterior segment diseases of the eye.

Evaluations of the Chuanqi Ophthalmic Microemulsion In Situ Gel on Dry Age-Related Macular Degeneration Treatment

Age-related macular degeneration (AMD) is the third largest eye disease. However, the eye has a variety of drug delivery barriers, which prevent the drug from reaching the lesions in the posterior segment of the eye, coupled with the pathogenesis of dry-AMD; these lead to the lack of effective treatment drugs for dry-AMD. Therefore, the developments of a suitable therapeutic drug and a novel ophthalmic preparation are of great significance for the treatment of dry-AMD. The purposes of this study were to construct a novel traditional Chinese medicine (Chuanqi Fang) anti-AMD microemulsion in situ gel for treating dry-AMD and investigate its characteristic, efficiency, irritation, and tissue distribution. In this study, the characteristic of the Chuanqi microemulsion in situ gel was measured by dynamic light scattering. The electroretinogram (ERG) indicators and the number of retinal pigment epithelial cells were measured to evaluate the therapeutic effect of the novel ophthalmic nanopreparations. Irritation was evaluated according to Technical Guideline Principles (ZGPT4-1). The analysis of tissue distribution was carried out with LC-MS. The research showed that the particle size of microemulsion was 38.56 ± 0.21 nm. The Chuanqi microemulsion in situ gel had certain roles in repairing retina damage of the dry-AMD animal model and showed no irritation. The tissue distribution study found that the microemulsion in situ gel could effectively deliver the drug to the posterior eye of the AMD model rat through the route of cornea-vitreous body-retina. In conclusion, this study provided a meaningful research strategy and research basis for the development of new dry-AMD therapeutic drugs.

Navigating albumin-based nanoparticles through various drug delivery routes

As a natural polymer, albumin is well-received for being nontoxic, nonimmunogenic, biodegradable and biocompatible. Together with its targeting potential on specific cells, albumin-based nanoparticles appear as an effective carrier for various therapeutics. In recent years, there has been an increasing number of studies investigating the use of albumin-based nanoparticles across different administration routes. Although each route and target tissue presents a distinct anatomical and physiological profile that demands specific consideration, pharmaceuticals could still be delivered effectively via albumin-based nanoparticles. Therefore, this review discusses the features that warrant such applications across various delivery routes and explores their possibilities in other administration routes. The challenges associated with its use will also be elaborated to provide a holistic consideration to realise their clinical potentials.

Laponite as carrier for controlled in vitro delivery of dexamethasone in vitreous humor models

Laponite clay is able to retain dexamethasone by simple physisorption, presumably accomplished by hydrogen bonding formation and/or complexation with sodium counterions, as shown by solid state NMR. The physisorption can be somehow modulated by changing the solvent in the adsorption process. This simple system is able to deliver dexamethasone in a controlled manner to solutions used as models for vitreous humor. The proven biocompatibility of laponite as well as its transparency in the gel state, together with the simplicity of the preparation method, makes this system suitable for future in vivo tests of ophthalmic treatment.

Distribution of Triamcinolone Acetonide after Intravitreal Injection into Silicone Oil-Filled Eye

There is increasing use of the vitreous cavity as a reservoir for drug delivery. We study the intraocular migration and distribution of triamcinolone acetonide (TA) after injection into silicone oil tamponade agent during and after vitrectomy surgery ex vivo (pig eye) and in vitro (glass bottle). For ex vivo assessment, intraocular migration of TA was imaged using real-time FLASH MRI scans and high-resolution T2W imaging and the in vitro model was monitored continuously with a video camera. Results of the ex vivo experiment showed that the TA droplet sank to the interface of silicone oil and aqueous almost immediately after injection and remained inside the silicone oil bubble for as long as 16 minutes. The in vitro results showed that, after the shrinkage of the droplet, TA gradually precipitated leaving only a lump of whitish crystalline residue inside the droplet for about 100 minutes. TA then quickly broke the interface and dispersed into the underlying aqueous within 15 seconds, which may result in a momentary increase of local TA concentration in the aqueous portion and potentially toxic to the retina. Our study suggests that silicone oil may not be a good candidate as a drug reservoir for drugs like TA.

Sustained intravitreal delivery of dexamethasone using an injectable and biodegradable thermogel

Delivery of therapeutic agents to posterior segment of the eyes is challenging due to the anatomy and physiology of ocular barriers and thus long-acting implantable formulations are much desired. In this study, a thermogelling system composed of two poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock copolymers was developed as an injectable matrix for intravitreal drug delivery. The thermogel was prepared by mixing a sol and a precipitate of PLGA-PEG-PLGA triblock copolymers with different block ratios, among which a hydrophobic glucocorticoid, dexamethasone (DEX), was incorporated. The DEX-loaded thermogel was a low-viscous liquid at low temperature and formed a non-flowing gel at body temperature. The in vitro release rate of DEX from the thermogel could be conveniently modulated by varying the mixing ratio of the two copolymers. The long-lasting intraocular residence of the thermogel was demonstrated by intravitreal injection of a fluorescence-labeled thermogel to rabbits. Compared with a DEX suspension, the intravitreal retention time of DEX increased from a dozen hours to over 1week when being loaded in the thermogel. Additionally, intravitreal administration of the thermogel did not impair the morphology of retina and cornea. This study reveals that the injectable PLGA-PEG-PLGA thermogel is a biocompatible carrier for sustained delivery of bioactive agents into the eyes, and provides an alternative approach for treatment of posterior segment diseases.

Electroforming of implantable tubular magnetic microrobots for wireless ophthalmologic applications

Magnetic tubular implantable micro-robots are batch fabricated by electroforming. These microdevices can be used in targeted drug delivery and minimally invasive surgery for ophthalmologic applications. These tubular shapes are fitted into a 23-gauge needle enabling sutureless injections. Using a 5-degree-of-freedom magnetic manipulation system, the microimplants are conveniently maneuvered in biological environments. To increase their functionality, the tubes are coated with biocompatible films and can be successfully filled with drugs.

An overview of clinical and commercial impact of drug delivery systems

Drug delivery systems are widely researched and developed to improve the delivery of pharmaceutical compounds and molecules. The last few decades have seen a marked growth of the field fueled by increased number of researchers, research funding, venture capital and the number of start-ups. Collectively, the growth has led to novel systems that make use of micro/nano-particles, transdermal patches, inhalers, drug reservoir implants and antibody-drug conjugates. While the increased research activity is clearly an indication of proliferation of the field, clinical and commercial translation of early-stage research ideas is critically important for future growth and interest in the field. Here, we will highlight some of the examples of novel drug delivery systems that have undergone such translation. Specifically, we will discuss the developments, advantages, limitations and lessons learned from: (i) microparticle-based depot formulations, (ii) nanoparticle-based cancer drugs, (iii) transdermal systems, (iv) oral drug delivery systems, (v) pulmonary drug delivery, (vi) implants and (vii) antibody-drug conjugates. These systems have impacted treatment of many prevalent diseases including diabetes, cancer and cardiovascular diseases, among others. At the same time, these systems are integral and enabling components of products that collectively generate annual revenues exceeding US $100 billion. These examples provide strong evidence of the clinical and commercial impact of drug delivery systems.

Polymeric nanoparticle system to target activated microglia/macrophages in spinal cord injury

The possibility to control the fate of the cells responsible for secondary mechanisms following spinal cord injury (SCI) is one of the most relevant challenges to reduce the post traumatic degeneration of the spinal cord. In particular, microglia/macrophages associated inflammation appears to be a self-propelling mechanism which leads to progressive neurodegeneration and development of persisting pain state. In this study we analyzed the interactions between poly(methyl methacrylate) nanoparticles (PMMA-NPs) and microglia/macrophages in vitro and in vivo, characterizing the features that influence their internalization and ability to deliver drugs. The uptake mechanisms of PMMA-NPs were in-depth investigated, together with their possible toxic effects on microglia/macrophages. In addition, the possibility to deliver a mimetic drug within microglia/macrophages was characterized in vitro and in vivo. Drug-loaded polymeric NPs resulted to be a promising tool for the selective administration of pharmacological compounds in activated microglia/macrophages and thus potentially able to counteract relevant secondary inflammatory events in SCI.

Local chemotherapeutic agents for the treatment of ocular malignancies

We critically analyze available peer-reviewed literature, including clinical trials and case reports, on local ocular cancer treatments. Recent innovations in many areas of ocular oncology have introduced promising new therapies, but, for the most part, the optimal treatment of ocular malignancies remains elusive.

Chitosan electrodeposition for microrobotic drug delivery

A method to functionalize steerable magnetic microdevices through the co-electrodeposition of drug loaded chitosan hydrogels is presented. The characteristics of the polymer matrix have been investigated in terms of fabrication, morphology, drug release and response to different environmental conditions. Modifications of the matrix behavior could be achieved by simple chemical post processing. The system is able to load and deliver 40-80 μg cm(-2) of a model drug (Brilliant Green) in a sustained manner with different profiles. Chitosan allows a pH responsive behavior with faster and more efficient release under slightly acidic conditions as can be present in tumor or inflamed tissue. A prototype of a microrobot functionalized with the hydrogel is presented and proposed for the treatment of posterior eye diseases.

Novel engineered systems for oral, mucosal and transdermal drug delivery

Technological advances in drug discovery have resulted in increasing number of molecules including proteins and peptides as drug candidates. However, how to deliver drugs with satisfactory therapeutic effect, minimal side effects and increased patient compliance is a question posted before researchers, especially for those drugs with poor solubility, large molecular weight or instability. Microfabrication technology, polymer science and bioconjugate chemistry combine to address these problems and generate a number of novel engineered drug delivery systems. Injection routes usually have poor patient compliance due to their invasive nature and potential safety concerns over needle reuse. The alternative non-invasive routes, such as oral, mucosal (pulmonary, nasal, ocular, buccal, rectal, vaginal), and transdermal drug delivery have thus attracted many attentions. Here, we review the applications of the novel engineered systems for oral, mucosal and transdermal drug delivery.

PDMS embedded microneedles as a controlled release system for the eye

Purpose:

To demonstrate intraocular drug delivery using a novel device fabricated by embedding hollow glass microneedles within a soft and flexible poly (dimethylsiloxane) (PDMS) substrate for ease of device insertion into the eye.

Methods:

Hollow glass microneedles (5 µm ID tips), fabricated using standard glass drawing techniques, were assembled into a photolithographically micropatterned PDMS substrate. The microneedles were fluidically coupled to a drug reservoir through a 300 µm microchannel to test for in vitro release of 6-aminoquinolone (144 Da) and Rose Bengal (1044 Da). Intravitreal delivery in ex vivo bovine eyes was also studied.

Results:

The microneedles penetrated UV-crosslinked collagen and excised bovine sclera without breaking or delaminating from the PDMS matrix. A total of 45 ng of 6-aminoquinolone and 16 µg of Rose Bengal was released into buffered saline over a 20-min infusion at a delivery rate of 50 µL/min. Microinjection of Rose Bengal for 8 h into ex vivo bovine vitreous resulted in a total mass accumulation of 0.0202 mg into both phases of the vitreous humor and to the uveal face of the sclera without clogging of the internal needle microchannel.

Conclusions:

PDMS-embedded microneedles offer an integrated method of drug targeting to the intraocular tissues using a less invasive and less painful approach when compared with macroscale hypodermic needles. The release rates from the microneedles were controllable on demand using a syringe pump and were independent of the properties of the drugs tested. The device demonstrated a new hybrid approach of coupling rigid microneedles strong enough to penetrate the tough, fibrous sclera with a soft and pliable PDMS substrate that could conform to the contours of the eye.

A review of implantable intravitreal drug delivery technologies for the treatment of posterior segment eye diseases

Intravitreal implantable device technology utilizes engineered materials or devices that could revolutionize the treatment of posterior segment eye diseases by affording localized drug delivery, responding to and interacting with target sites to induce physiological responses while minimizing side-effects. Conventional ophthalmic drug delivery systems such as topical eye-drops, systemic drug administration or direct intravitreal injections do not provide adequate therapeutic drug concentrations that are essential for efficient recovery in posterior segment eye disease, due to limitations posed by the restrictive blood-ocular barriers. This review focuses on various aspects of intravitreal drug delivery such as the impediment of the blood-ocular barriers, the potential sites or intraocular drug delivery device implantation, the various approaches employed for ophthalmic drug delivery and includes a concise critical incursion into specialized intravitreal implantable technologies for the treatment of anterior and posterior segment eye disease. In addition, pertinent future challenges and opportunities in the development of intravitreal implantable devices is discussed and explores their application in clinical ophthalmic science to develop innovative therapeutic modalities for the treatment of various posterior segment eye diseases. The inherent structural and functional properties, the potential for providing rate-modulated drug delivery to the posterior segment of the eye and specific development issues relating to various intravitreal implantable drug delivery devices are also expressed in this review.

Safety and Pharmacokinetics of an Intravitreal Biodegradable Implant of Dexamethasone Acetate in Rabbit Eyes

The treatment of vitreoretinal diseases is limited and, nowadays, new drug delivery approaches have been reported in order to increase drug bioavailability. The objective of the current study was to determine the pharmacokinetic profile of a biodegradable dexamethasone acetate implant inserted into the vitreous of rabbits and to evaluate its potential signs of toxicity to the rabbits' eyes. The results showed that the intravitreous drug concentration remained within the therapeutic range along the 8-week period of evaluation. The system under study was not toxic to the normal rabbit retina, and no significant increase in intraocular pressure was observed.

Downregulation of endotoxin-induced uveitis by intravitreal injection of polylactic-glycolic acid (PLGA) microspheres loaded with dexamethasone

We tested the short- and long-term ability of polylactic-glycolic acid (PLGA) microspheres loaded with dexamethasone to reduce ocular inflammation in rabbits elicited by intravitreal lipopolysaccharide (LPS) injection. PLGA microspheres loaded with dexamethasone were prepared by the solvent evaporation technique from an oil/water emulsion and sterilized by gamma irradiation (25 kGy). The microsphere fraction selected was 2:10 (dexamethasone:PLGA) and contained 141 +/- 0.38 microg dexamethasone/mg PLGA. Microsphere diameters were 20-53 microm, and the mean encapsulation efficiency was 92.97 +/- 0.75%. Seven days prior to the induction of panuveitis, 10 mg of dexamethasone-free or dexamethasone-loaded microspheres were injected into the vitreous. Control animals received no injection. Panuveitis was induced in male New Zealand rabbits (2.5-3.0 kg) by intravitreal injection of Escherichia coli LPS. Clinical evaluation, electroretinography and histopathologic studies were performed in short-term studies of 15 days and in long-term studies of 33 days. Efficacy in reducing inflammation was also studied in vitrectomized eyes. In short-term studies eyes injected with dexamethasone-loaded microspheres had less inflammation than control eyes and eyes injected with blank microspheres. Inflammation reverted in all groups by 15 days after LPS injection. A second LPS dose given on Day 30 provoked a high peak of inflammation in control eyes and in those injected with blank microspheres. In contrast, only slight inflammation occurred in eyes injected with dexamethasone-loaded microspheres. Histopathology and electroretinography supported these results. Dexamethasone-loaded microspheres effectively reduced intraocular inflammation caused by LPS in both short- and long-term studies.

Transorbital endoscopic image guidance

Endoscopic orbital procedures are hindered by the difficulty in differentiating between orbital structures during those procedures. Image guidance during endoscopic orbital procedures may improve the outcome of orbital endoscopic procedures because real time image and physical space tracking information can be provided to the surgeons to help in the delivery of therapy to the orbit. The research plan proposes to study the feasibility of image guided endoscopic orbital procedures. Specifically this research will characterize both the random and spatial fiducial localization error of the magnetic tracker. We will also determine and optimal fiducial placement that will minimize the TRE at the optic nerve junction and also demonstrate and validate the use of the magnetic tracker for transorbital endoscopic image guidance.

Novel approaches to retinal drug delivery

Research into treatment modalities affecting vision is rapidly progressing due to the high incidence of diseases such as diabetic macular edema, proliferative vitreoretinopathy, wet and dry age-related macular degeneration and cytomegalovirus retinitis. The unique anatomy and physiology of eye offers many challenges to developing effective retinal drug delivery systems. Historically, drugs have been administered to the eye as liquid drops instilled in the cul-de-sac. However retinal drug delivery is a challenging area. The transport of molecules between the vitreous/retina and systemic circulation is restricted by the blood-retinal barrier, which is made up of retinal pigment epithelium and endothelial cells of the retinal blood vessels. An increase in the understanding of drug absorption mechanisms into the retina from local and systemic administration has led to the development of various drug delivery systems, such as biodegradable and non-biodegradable implants, microspheres, nanoparticles and liposomes, gels and transporter-targeted prodrugs. Such diversity in approaches is an indication that there is still a need for an optimized noninvasive or minimally invasive drug delivery system to the eye. A number of large molecular weight compounds (i.e., oligonucleotides, RNA aptamers, peptides and monoclonal antibodies) have been and continue to be introduced as new therapeutic entities. However, for high molecular weight polar compounds the mechanism of epithelial transport is primarily through the tight junctions in the retinal pigment epithelium, as these agents undergo limited transcellular diffusion. Delivery and administration of these new drugs in a safe and effective manner is still a major challenge facing pharmaceutical scientists. In this review article, the authors discuss various drug delivery strategies, devices and challenges associated with drug delivery to the retina.

The ocular effects of intravitreal triamcinolone acetonide in dogs

The aim of the study was to determine the ocular safety of a single intravitreal dose of triamcinolone acetonide (IVTA) in dogs. Eleven healthy dogs received a single IVTA injection (8 mg) through the mid-temporal pars-plana of the left eye (OS) using a 27G needle. The dogs were re-evaluated immediately post-IVTA, every 5 min until pre-IVTA values had returned, then daily for 3 days, weekly for 1 month and monthly for 3 months. Immediately post-IVTA, all the treated eyes showed a rise in intraocular pressure (IOP) with a mean value of 41.8+/-8.9 mm Hg. The IOP values then decreased progressively to 14.5+/-2.1 mm Hg at 12.2+/-3.8 min post-IVTA. From then on, normal IOP values were maintained throughout the 3-month monitoring period. The most frequently observed clinical sign post-IVTA was conjunctival hyperaemia. The presence of triamcinolone acetonide in the vitreous was observed in all subsequent examinations of 10/11 eyes and there were still triamcinolone crystals in 5/11 eyes after 90 days. It was concluded that intravitreal injection of triamcinolone acetonide in dogs is feasible under sedation. The immediate increase in IOP post-IVTA is short-lived and pressure quickly returns to pre-IVTA levels.

P-Glycoprotein expression in human retinal pigment epithelium cell lines

P-Glycoprotein (P-gp), an active efflux transporter encoded by the MDR1 gene, has recently been identified in the human and pig retinal pigment epithelium (RPE) in situ. Efflux pumps such as P-gp are major barriers to drug delivery in several tissues. We wished to establish whether human RPE cell lines express P-gp under the culture conditions recommended for each cell line so as to determine their suitability as in vitro models for predicting drug transport across the outer blood-retinal barrier. Three human RPE cell lines, ARPE19, D407 and h1RPE were investigated. Reverse transcriptase-polymerase chain reaction (RT-PCR) was carried out to determine the expression of MDR1 mRNA. Immunocytochemistry using the P-gp-specific antibody C219 was undertaken to investigate the presence of P-gp protein in each cell type. Uptake of rhodamine 123, a P-gp substrate, in the presence or absence of pre-treatment with a P-gp inhibitor, verapamil, was measured in each cell line to determine functional expression of P-gp. For all experiments, MDCK cells stably transfected with the human MDR1 gene (MDCK-MDR1) were used as a positive control. ARPE19 cells were consistently negative for P-gp as assessed by RT-PCR and immunocytochemistry. By contrast, RT-PCR of D407 and h1RPE samples yielded weak bands corresponding to MDR1; P-gp protein expression, as demonstrated by C219 immunoreactivity, was also present. Rhodamine uptake after treatment with verapamil was significantly greater in D407 and MDCK-MDR1, indicating functional expression of P-gp in these two cell lines. No evidence of functional P-gp was found in ARPE19 and h1RPE. In conclusion, D407 and h1RPE cells express P-gp, though functional activity was demonstrable only in D407 cells. ARPE19 cells do not express P-gp. Of these human RPE cells lines D407 could be considered as a suitable model for in vitro drug transport studies, particularly those involving P-gp substrates, without modification of their usual culture conditions.

Biocompatibility of elastin-like polymer poly(VPAVG) microparticles:in vitro andin vivo studies

Poly(L-valine-L-proline-L-alanine-L-valine-L-glycine) (VPAVG) is a new kind of proteinaceous polymer belonging to the Elastin-like family. These polymers are based on the recurrence of certain short peptide monomers that are considered as "building blocks" in the natural elastin. This smart thermoresponsive polymer has the ability to self-associate at physiological temperature to form aggregates with about 60% in water. This ability can be harnessed to prepare microparticles loaded with an active substance. The aim of this report is to evaluate, from the results of the experiment conducted, the biocompatibility of microparticles prepared from poly(VPAVG). We have studied the cytotoxic effects of microparticles, edema formation after subcutaneous injection (1 and 2.5 mg) in rats (n = 6), and also intraocular tolerance after the intravitreal injection of 2.5 mg of poly(VPAVG) microparticles into pigmented rabbits (n = 12). The polymer did not induce any cytotoxicity or nonspecific depression of cellular respiration on macrophages under the range of polymer concentrations investigated in this study (20, 30, 40, and 60 mg/mL). We observed no inflammatory response to microparticles after subcutaneous injection in the hind-paw of rats, with no significant differences between the control group (PBS) and experimental groups. Anterior and posterior segment signs were evaluated after intraocular injection of poly(VPAVG) microparticles. Only a few eyes (2/11) of the experimental group presented inflammation signs at day 28 postinjection. Nevertheless, 45% (5/11) of the eyes receiving microparticles showed tractional retinal detachment. The results observed in this work suggested certain fibroblastic activity induced by poly(VPAVG) microparticles after their intraocular injection.

Periocular routes for retinal drug delivery

Despite numerous scientific efforts, delivery of therapeutic amounts of a drug to the retina remains a challenge. This challenge is compounded if chronic therapy is desired. The inability or inefficiency of topical and systemic routes for retinal delivery of existing drugs is now widely accepted. Although the intravitreal route offers high local concentrations in the vitreous and, hence, retina, these advantages are offset by side effects, such as cataracts, endophthalmitis and retinal detachment, following repeated intravitreal injections, or intravitreal placement of sustained-release implants. As discussed in this review, periocular routes, including subconjunctival, sub-tenon, retrobulbar, peribulbar and posterior juxtascleral routes, potentially offer a more promising alternative for enhanced drug delivery to the retina compared with topical and systemic routes. Periocular routes exploit the permeability of sclera for retinal drug delivery, and they are particularly useful for administering sustained-release systems of potent drugs. This review discusses the various periocular routes with respect to their anatomical location, pharmacokinetics, safety and mechanisms of drug delivery. In the coming years, several innovations in absorption enhancement, drug delivery systems and drug administration devices are anticipated for improving retinal drug delivery via periocular routes.

Gellan-based scleral implants of indomethacin: in vitro and in vivo evaluation

Film-type scleral implants of indomethacin with gellan gum were prepared by solvent casting and evaluated for uniformities of thickness, weight, drug content, and surface pH. The effect of plasticizers like glycerol, propylene glycol (PG), and polyethylene glycol 200, and 400 on the void volume of free gellan films (placebo) was calculated from the water content of the films. The drug release from the prepared implants was determined using a static dissolution set-up developed and optimized in our laboratory. Based on the results of the void volume and initial drug release studies, glycerol and PG were selected as the plasticizers for the gellan-based implants. The morphology of the drug-free films (containing 10% and 40% of PG) and the drug-loaded films (before and after dissolution and crosslinked) was studied using scanning electron microscopy. Further, the effect of plasticizer concentration, gellan concentration, effect of crosslinking technique, and duration of crosslinking using calcium chloride on in vitro drug release characteristics were evaluated. Selected batches of the implants were subjected to pharmacodynamic studies, after scleral placement, in uveitis-induced (intravitreal injection of bovine serum albumin 50 microg/ml) rabbit eyes. The release of indomethacin from the prepared implants followed matrix diffusion kinetics with diffusion co-efficient (n) values ranging between 0.358 to 0.708 and seemed to depend on both gellan and plasticizer concentration. Surface crosslinking with 10% calcium chloride for 8 hr retarded drug release (1.42 times less than noncrosslinked implant) and was optimum. The pharmacodynamic studies showed a marked improvement in the various clinical parameters (congestion, keratitis, flare, clot, aqueous cells, and synechias) in the implanted eye compared with the control eye in the rabbits. The scleral implants survived up to 3 weeks in vivo.

Study of Ocular Transport of Drugs Released from an Intravitreal Implant Using Magnetic Resonance Imaging

Ensuring optimum delivery of therapeutic agents in the eye requires detailed information about the transport mechanisms and elimination pathways available. This knowledge can guide the development of new drug delivery devices. In this study, we investigated the movement of a drug surrogate, Gd-DTPA (Magnevist) released from a polymer-based implant in rabbit vitreous using T1-weighted magnetic resonance imaging (MRI). Intensity values in the MRI data were converted to concentration by comparison with calibration samples. Concentration profiles approaching pseudosteady state showed gradients from the implant toward the retinal surface, suggesting that diffusion was occurring into the retinal-choroidal-scleral (RCS) membrane. Gd-DTPA concentration varied from high values near the implant to lower values distal to the implant. Such regional concentration differences throughout the vitreous may have clinical significance when attempting to treat ubiquitous eye diseases using a single positional implant. We developed a finite element mathematical model of the rabbit eye and compared the MRI experimental concentration data with simulation concentration profiles. The model utilized a diffusion coefficient of Gd-DTPA in the vitreous of 2.8 x 10(-6) cm2 s(-1) and yielded a diffusion coefficient for Gd-DTPA through the simulated composite posterior membrane (representing the retina-choroidsclera membrane) of 6.0 x 10(-8) cm2 s(-1). Since the model membrane was 0.03-cm thick, this resulted in an effective membrane permeability of 2.0 x 10(-6) cm s(-1). Convective movement of Gd-DTPA was shown to have minimal effect on the concentration profiles since the Peclet number was 0.09 for this system.

Cyclosporine A delivery to the eye: a pharmaceutical challenge

Systemic administration of cyclosporine A (CsA) is commonly used in the treatment of local ophthalmic conditions involving cytokines, such as corneal graft rejection, autoimmune uveitis and dry eye syndrome. Local administration is expected to avoid the various side effects associated with systemic delivery. However, the currently available systems using oils to deliver CsA topically are poorly tolerated and provide a low bioavailability. These difficulties may be overcome through formulations aimed at improving CsA water solubility (e.g. cyclodextrins), or those designed to facilitate tissue drug penetration using penetration enhancers. The use of colloidal carriers (micelles, emulsions, liposomes and nanoparticles) as well as the approach using hydrosoluble prodrugs of CsA have shown promising results. Solid devices such as shields and particles of collagen have been investigated to enhance retention time on the eye surface. Some of these topical formulations have shown efficacy in the treatment of extraocular diseases but were inefficient at reaching intraocular targets. Microspheres, implants and liposomes have been developed to be directly administered subconjunctivally or intravitreally in order to enhance CsA concentration in the vitreous. Although progress has been made, there is still room for improvement in CsA ocular application, as none of these formulations is ideal.

In vitro and in vivo characterization of scleral implant of indomethacin: role of plasticizer and cross-linking time

Film-type scleral implants of indomethacin using sodium alginate and PEG 400 and 600 (3, 5, 8, and 10% w/w w.r.t. sodium alginate) as plasticizers were fabricated by solvent casting. The prepared implants were cross-linked by treatment with calcium chloride 10, 20, and 30% w/v solution, for periods between 1 to 24 hr. Uniformity of thickness, weight, and drug content and surface pH of the implants were evaluated. The influence of plasticizer type/concentration and crosslinking time/concentration of calcium chloride on indomethacin release was studied on a static dissolution setup developed by us. Selected batches of the implants were subjected to pharmacodynamic studies, after scleral placement, in uveitis-induced (intravitreal injection of bovine serum albumin 50 microg/ml) rabbit eyes. The release of indomethacin from the implants was influenced by the concentration and nature of plasticizers used. Chemical cross-linking with calcium chloride was successful in retarding the drug release. The pharmacodynamic studies showed a marked improvement in the various clinical parameters (congestion, keratitis, flare, clot, aqueous cells, and synechias) in the implanted eye when compared with the control eye in the rabbits. The implants survived for 2 weeks in vivo.

Topical cyclosporine in pediatric keratoplasty

PURPOSE

To evaluate the efficacy and safety of combined treatment with 2% topical cyclosporine (CsA) and topical corticosteroid compared to treatment with topical corticosteroids only after pediatric keratoplasty.

METHODS

Twenty-two grafts in 16 pediatric patients were evaluated retrospectively. The eyes were divided into a CsA group (9 eyes) and a control group (13 eyes) based on the postoperative treatment regimen. Information reviewed included patient age and sex, clinical diagnosis; preoperative and postoperative intraocular pressure and lens status; previous, concurrent, and subsequent surgical procedures; operative and postoperative complications; number of graft rejections, timing of suture removal, and length of follow-up. The clinical outcome of penetrating keratoplasty (PK) was evaluated by the rate of rejection-free graft survival and graft survival evaluation by the Kaplan-Meier log-rank test.

RESULTS

The rejection-free graft survival rate was 88.9% in the CsA group and 38.5% in the control group. This difference in rejection-free graft survival rate between the groups was statistically significant (P =.0465). The graft survival rate was 88.9% in the CsA group and 46.2% in the control group. The difference in the graft survival rate was not statistically significant between the groups (P =.6). No clinical signs of systemic or local toxicity were seen with the topical CsA treatment.

CONCLUSIONS

Two percent topical CsA is safe and effective in reducing the risk of allograft rejection in pediatric recipients.

A biodegradable injectable implant sustains systemic and ocular delivery of an aldose reductase inhibitor and ameliorates biochemical changes in a galactose-fed rat model for diabetic complications

PURPOSE

To fabricate and characterize in vitro and in vivo performance of a sustained release biodegradable implant for N-4-(benzoylaminophenylsulfonyl glycine) (BAPSG), a novel aldose reductase inhibitor.

METHODS

The ability of BAPSG to inhibit aldose reductase activity and glucose-induced vascular endothelial growth factor (VEGF) expression was assessed in a retinal pigment epithelial cell line (ARPE-19). A poly (DL-lactic-co-glycolic acid) implant containing 50% w/w BAPSG was fabricated and characterized for drug loading, in vitro drug release, and the thermal behavior of the drug and the polymer. Implants were injected subcutaneously into a galactose-fed diabetic rat model and cataract scores, plasma and tissue drug levels, galactitol levels in the lens and the retina, glutathione levels in the plasma, lens, cornea and retina and VEGF expression in the retina were determined on or until 18 days.

RESULTS

BAPSG inhibited aldose reductase activity and reduced VEGF expression in ARPE-19 cells. Implants (1 x 4 mm), with a loading efficiency of 106 +/- 7% for BAPSG, were fabricated. Upon implant fabrication, while the glass transition temperature of the polymer decreased, the melting point of the drug was not affected. In vivo drug release correlated well with in vitro release, with approximately 44% drug release occurring in vivo by the end of 18 days. The implant reduced galactitol accumulation, glutathione depletion, cataract scores, and VEGF expression in galactose-fed rats.

CONCLUSIONS

An injectable biodegradable implant of BAPSG sustained drug release in vitro and in vivo, and reduced galactitol accumulation, glutathione depletion, cataract scores, and VEGF expression in galactose-fed rats.

Biodegradable microspheres for vitreoretinal drug delivery

Vitreoretinal disorders are one of the major causes of blindness in the developed world. Treatments of these pathologies often include repeated intravitreous injections to achieve intraocular drug levels within the therapeutical range. However, the risks of complications increase with the frequency of intravitreous injections. Controlled drug delivery formulations, offer an excellent alternative to multiple administrations. These systems are capable of delivering drugs over longer time periods than conventional formulations. Currently, several kinds of polymer devices for drug delivery to the posterior segment of the eye are under clinical use, or under investigation. Among these devices, microparticulates, such as microspheres, provide an alternative to multiple injections to obtain sustained release of the drug with a single administration. Among the polymers used to make the injectable microparticles, the most commonly used are poly(lactic acid), poly(glycolic acid) and copolymers of lactic and glycolic acids because they are biocompatible and degrade to metabolic products that are easily eliminated from the body. This article reviews the literature of biodegradable polymeric microspheres loaded with drugs, that have been investigated for delivery by intravitreous injection to treat diverse vitreoretinal diseases.

Contact dermatitis from topical antiviral drugs

The literature has been reviewed for contact dermatitis from topical antiviral drugs. 15 agents have been identified including acyclovir, imiquimod, podophyllin, podofilox, cidofovir, penciclovir, vidarabine, idoxuridine, trifluridine, tromantadine, lamivudine, interferon intralesional injections and ophthalmic solution, fomivirsen and foscarnet intravitreal injections and ganciclovir intraocular implants. Patch testing has been documented in certain individuals and cross-sensitization has been observed to contribute significantly to some allergic reactions.

Enhancement of scleral macromolecular permeability with prostaglandins

PURPOSE

It is proposed that the sclera is a metabolically active and pharmacologically responsive tissue. These studies were undertaken to determine whether prostaglandin exposure can enhance scleral permeability to high-molecular-weight substances.

METHODS

Topical prostaglandin F2 alpha (PGF2 alpha) was administered to monkeys to determine if this altered the amount of scleral matrix metalloproteinases (MMPs). Experiments also were performed to determine whether the prostaglandin F (FP) receptor and gene transcripts are expressed in normal human sclera. Permeability of organ-cultured human sclera following prostaglandin exposure then was studied and the amount of MMP released into the medium measured. Finally, the permeability of human sclera to basic fibroblast growth factor (FGF-2) was determined following prostaglandin exposure.

RESULTS

Topical prostaglandin administration that reduced scleral collagen also increased scleral MMP-1, MMP-2, and MMP-3 by 63 +/- 35%, 267 +/- 210%, and 729 +/- 500%, respectively. FP receptor protein was localized in scleral fibroblasts, and FP receptor gene transcript was identified in sclera. Exposure to prostaglandin F2 alpha, 17-phenyltrinor, PGF2 alpha, or latanoprost acid increased scleral permeability by up to 124%, 183%, or 213%, respectively. In these cultures, MMP-1, MMP-2, and MMP-3 were increased by up to 37%, 267%, and 96%, respectively. Finally, transscleral absorption of FGF-2 was increased by up to 126% with scleral exposure to latanoprost.

CONCLUSIONS

These studies demonstrate that the sclera is metabolically active and pharmacologically responsive to prostaglandins. Further, they demonstrate the feasibility of cotreatment with prostaglandin to enhance transscleral delivery of peptides, such as growth factors and high-molecular-weight substances, to the posterior segment of the eye.