Multicompartmental pharmacokinetic model of tenofovir delivery by a vaginal gel

Development and verification of mechanistic vaginal absorption and metabolism model to predict systemic exposure after vaginal ring and gel application

AIMS

The current work describes the development of mechanistic vaginal absorption and metabolism model within Simcyp Simulator to predict systemic concentrations following vaginal application of ring and gel formulations.

METHODS

Vaginal and cervix physiology parameters were incorporated in the model development. The study highlights the model assumptions including simulation results comparing systemic concentrations of 5 different compounds, namely, dapivirine, tenofovir, lidocaine, ethinylestradiol and etonogestrel, administered as vaginal ring or gel. Due to lack of data, the vaginal absorption parameters were calculated based on assumptions or optimized. The model uses release rate/in vitro release profiles with formulation characteristics to predict drug mass transfer across vaginal tissue into the systemic circulation.

RESULTS

For lidocaine and tenofovir vaginal gel, the predicted to observed AUC0-t and Cmax ratios were well within 2-fold error limits. The average fold error (AFE) and absolute AFE indicating bias and precision of predictions range from 0.62 to 1.61. For dapivirine, the pharmacokinetic parameters are under and overpredicted in some studies due to lack of formulation composition details and relevance of release rate used in ring model. The predicted to observed AUC0-t and Cmax ratios were well within 2-fold error limits for etonogestrel and ethinylestradiol vaginal ring (AFEs and absolute AFEs from 0.84 to 1.83).

CONCLUSION

The current study provides first of its kind physiologically based pharmacokinetic framework integrating physiology, population and formulation data to carry out in silico mechanistic vaginal absorption studies, with the potential for virtual bioequivalence assessment in the future.

Computational Modeling of Probiotic Recovery from 3D-Bioprinted Scaffolds for Localized Vaginal Application

Lactobacilli, play a beneficial role in the female reproductive tract (FRT), regulating pH via lactic acid metabolism to help maintain a healthy environment. Bacterial vaginosis (BV) is characterized by a dysregulated flora in which anaerobes such as Gardnerella vaginalis (Gardnerella) create a less acidic environment. Current treatment focuses on antibiotic administration, including metronidazole, clindamycin, or tinidazole; however, lack of patient compliance as well as antibiotic resistance may contribute to 50% recurrence within a year. Recently, locally administered probiotics such as Lactobacillus crispatus (L. crispatus) have been evaluated as a prophylactic against recurrence. To mitigate the lack of patient compliance, sustained probiotic delivery has been proposed via 3D-bioprinted delivery vehicles. Successful delivery depends on a variety of vehicle fabrication parameters influencing timing and rate of probiotic recovery; detailed evaluation of these parameters would benefit from computational modeling complementary to experimental evaluation. This study implements a novel simulation platform to evaluate sustained delivery of probiotics from 3D-bioprinted scaffolds, taking into consideration bacterial lactic acid production and associated pH changes. The results show that the timing and rate of probiotic recovery can be realistically simulated based on fabrication parameters that affect scaffold degradation and probiotic survival. Longer term, the proposed approach could help personalize localized probiotic delivery to the FRT to advance women's health.

Modeling HIV Pre-Exposure Prophylaxis

Pre-exposure prophylaxis (PrEP) has emerged as a promising strategy for preventing the transmission of HIV. Although only one formulation is currently approved for PrEP, research into both new compounds and new delivery systems for PrEP regimens offer intriguing challenges from the perspective of pharmacokinetic and pharmacodynamic modeling. This review aims to provide an overview the current modeling landscape for HIV PrEP, focused on PK/PD and QSP models relating to antiretroviral agents. Both current PrEP treatments and new compounds that show promise as PrEP agents are highlighted, as well as models of uncommon administration routes, predictions based on models of mechanism of action and viral dynamics, and issues related to adherence to therapy. The spread of human immunodeficiency virus (HIV) remains one of the foremost global health concerns. In the absence of a vaccine, other prophylactic strategies have been developed to prevent HIV transmission. One approach, known as pre-exposure prophylaxis (PrEP), allows HIV-negative individuals who are at high risk of exposure to the virus, be it through an HIV-positive sexual partner or through the shared use of drug injection equipment, to substantially reduce the risk of developing an HIV infection. PrEP is a relatively recent approach to combating the HIV epidemic, with the only currently approved treatment being Truvada, a daily oral antiretroviral (ARV) therapy initially indicated in the treatment of active HIV-1 infections, but approved for HIV PrEP in 2012. Although PrEP therapy has consistently demonstrated high efficacy in preventing HIV infection, this efficacy is dependent on patient adherence to the prescribed treatment regimen. This can present a significant problem in low- and middle-income countries, which may lack the infrastructure to provide sufficient access to PrEP medication to maintain daily dosing regimens. Furthermore, while the conventional approach has generally been to advocate for continuous administration akin to regimens used for viral suppression in infected patients, there has been some discussion of whether a better treatment paradigm might be to push for PrEP therapy primarily during those known periods of heightened exposure risk, while relying on post-exposure prophylaxis regimens to prevent infection after unanticipated exposures during low-risk periods. These considerations have led to a push for the development of long-duration and on-demand PrEP formulations, including subdermal and subcutaneous implants, slow-release intramuscular depot injections, vaginal and rectal antimicrobial gels, and intravaginal rings and dissolving films. PrEP therapy is a quickly evolving field, with a variety of antiretroviral compounds and formulations under investigation. This review aims to report on notable drugs and formulations from a pharmacokinetic/pharmacodynamic (PK/PD) modeling perspective. Given the nature of PrEP as a preventive therapy designed for long-term use, clinical trials for PrEP therapies can last for months or even years, particularly in the case of long-duration formulations. Furthermore, in contrast to antiretroviral trials in infected patients, pharmacodynamic endpoints in PrEP therapies are difficult to quantify, as the primary endpoint for efficacy is generally the rate of seroconversion. Computational modeling approaches offer flexible and powerful tools to provide insight into drug behavior in clinical settings, and can ultimately reduce the time, expense, and patient burden incurred in the development of PrEP therapies.

Deducing Mucosal Pharmacokinetics and Pharmacodynamics of the Anti-HIV Molecule Tenofovir from Measurements in Blood

Microbicide pharmacokinetic (PK) studies typically sample drug in luminal fluid, mucosal tissue, and blood. Blood measurements can be conducted most frequently, serially within subjects. Antiretroviral drugs, however, act against HIV in mucosal tissue/cells. We computationally modeled the extent measurements in blood can predict concentrations in tissue, focusing on the antiretroviral drug tenofovir delivered by a vaginal gel. Deterministic PK models input host and product factors and output spatiotemporal drug concentrations in luminal fluid, epithelium, stroma/host cells, and blood. Pharmacodynamic (PD) analysis referenced stroma/host cell concentrations to prophylactic values; summary metrics were time from product insertion to protection (t_lag) and degree of protection (PP_max). Results incorporated host factors characteristic of population variability. Neural nets (NN) linked simulated blood PK metrics (C_max, t_max, AUC, C₂₄) to mucosal PK/PD metrics. The NNs delivered high-performance mapping of these multiparametric relationships. Given multi-log variability typical of biopsy data for tenofovir and other topical microbicides, results suggest downstream but higher fidelity measurements in blood could help improve determination of PK and create inferences about PD. Analysis here is for a tenofovir gel, but this approach offers promise for application to other microbicide modalities and to topical drug delivery to vaginal mucosa more generally.

Modeling of nanoparticle transport through the female reproductive tract for the treatment of infectious diseases

The secreted mucus layer in the vaginal epithelium presents a formidable barrier to the transport of active agents for the prevention and treatment of female reproductive tract (FRT) infections. Nanoparticle-mediated drug delivery has been proposed to help facilitate the transport and release of active agents through the cervicovaginal mucus (CVM) and underlying mucosa. However, both nanoparticles (NPs) and free active agents face a variety of challenges, often requiring the administration of high localized doses to circumvent leakage and poor penetration to targeted intravaginal tissue compartments. To address these challenges, "stealth" NP modifications have been investigated, due to their favorable mucus-penetrating properties, resulting in improved intravaginal active agent retention and transport. A number of other NP characteristics including size, surface modification type, ligand density, and co-modification, as well as the complexity of the FRT tissue are involved in obtaining adequate tissue penetration and, if needed, cell internalization. Studies that systematically investigate variations of these characteristics have yet to be conducted, with the goal to obtain a better understanding of what properties most impact prophylactic and therapeutic benefit. To complement the progress made with experimental evaluation of active agent transport in in vitro and in vivo, mathematical modeling has recently been applied to analyze the transport performance of agents and delivery vehicles in the FRT. Here, we build upon this work to simulate NP transport through mucus gel, epithelial, and stromal compartments, with the goal to provide a platform that can systematically evaluate transport based on NP and tissue characteristics. Model parameters such as PEG density and NP release (decay) rate from mucus gel into the epithelium, are set from previous in vitro and in vivo experimental work that assessed the transport of poly(lactic-co-glycolic acid (PLGA) NPs. The modeling results show that while unmodified and 2% PEG-modified NPs were retained in mucus for ∼1-4 h, dependent upon decay constant values, and traverse to the epithelium, no NP penetration was observed in the stroma. In contrast, NPs modified with 3% PEG, exhibited prolonged retention in each compartment, remaining for ∼4-6 h. Moreover, a significant concentration of NPs is observed in the stroma, indicating a transition in transport behavior. For NPs modified with 5, 8, or 25% PEG, steady retention profiles were noted, which gradually decline over 24 h. To supplement this modeling study and to develop a more representative experimental system that may be useful in future work, we report on the feasibility of constructing single and multicellular layered (MCL) culture systems to represent the epithelial and stromal tissue of the FRT. We anticipate that a combined mathematical/experimental approach may longer term enable prediction and customization of patient tissue-specific approaches to attain effective NP-mediated drug delivery and release for the treatment of infectious disease.

Physiologically-based pharmacokinetic model of vaginally administered dapivirine ring and film formulations

AIMS

A physiologically-based pharmacokinetic (PBPK) model of the vaginal space was developed with the aim of predicting concentrations in the vaginal and cervical space. These predictions can be used to optimize the probability of success of vaginally administered dapivirine (DPV) for HIV prevention. We focus on vaginal delivery using either a ring or film.

METHODS

A PBPK model describing the physiological structure of the vaginal tissue and fluid was defined mathematically and implemented in MATLAB. Literature reviews provided estimates for relevant physiological and physiochemical parameters. Drug concentration-time profiles were simulated in luminal fluids, vaginal tissue and plasma after administration of ring or film. Patient data were extracted from published clinical trials and used to test model predictions.

RESULTS

The DPV ring simulations tested the two dosing regimens and predicted PK profiles and area under the curve of luminal fluids (29 079 and 33 067 mg h l-1 in groups A and B, respectively) and plasma (0.177 and 0.211 mg h l-1 ) closely matched those reported (within one standard deviation). While the DPV film study reported drug concentration at only one time point per patient, our simulated profiles pass through reported concentration range.

CONCLUSIONS

HIV is a major public health issue and vaginal microbicides have the potential to provide a crucial, female-controlled option for protection. The PBPK model successfully simulated realistic representations of drug PK. It provides a reliable, inexpensive and accessible platform where potential effectiveness of new compounds and the robustness of treatment modalities for pre-exposure prophylaxis can be evaluated.

Full depth measurement of tenofovir transport in rectal mucosa using confocal Raman spectroscopy and optical coherence tomography

The prophylactic activity of antiretroviral drugs applied as microbicides against sexually transmitted HIV is dependent upon their concentrations in infectable host cells. Within mucosal sites of infection (e.g., vaginal and rectal mucosa), those cells exist primarily in the stromal layer of the tissue. Traditional pharmacokinetic studies of these drugs have been challenged by poor temporal and spatial specificity. Newer techniques to measure drug concentrations, involving Raman spectroscopy, have been limited by laser penetration depth into tissue. Utilizing confocal Raman spectroscopy (RS) in conjunction with optical coherence tomography (OCT), a new lateral imaging assay enabled concentration distributions to be imaged with spatial and temporal specificity throughout the full depth of a tissue specimen. The new methodology was applied in rectal tissue using a clinical rectal gel formulation of 1% tenofovir (TFV). Confocal RS revealed diffusion-like behavior of TFV through the tissue specimen, with significant partitioning of the drug at the interface between the stromal and adipose tissue layers. This has implications for drug delivery to infectable tissue sites. The new assay can be applied to rigorously analyze microbicide transport and delineate fundamental transport parameters of the drugs (released from a variety of delivery vehicles) throughout the mucosa, thus informing microbicide product design.

Nanoparticle-mediated drug delivery to treat infections in the female reproductive tract: evaluation of experimental systems and the potential for mathematical modeling

A variety of drug-delivery platforms have been employed to deliver therapeutic agents across cervicovaginal mucus (CVM) and the vaginal mucosa, offering the capability to increase the longevity and retention of active agents to treat infections of the female reproductive tract (FRT). Nanoparticles (NPs) have been shown to improve retention, diffusion, and cell-specific targeting via specific surface modifications, relative to other delivery platforms. In particular, polymeric NPs represent a promising option that has shown improved distribution through the CVM. These NPs are typically fabricated from nontoxic, non-inflammatory, US Food and Drug Administration-approved polymers that improve biocompatibility. This review summarizes recent experimental studies that have evaluated NP transport in the FRT, and highlights research areas that more thoroughly and efficiently inform polymeric NP design, including mathematical modeling. An overview of the in vitro, ex vivo, and in vivo NP studies conducted to date – whereby transport parameters are determined, extrapolated, and validated – is presented first. The impact of different NP design features on transport through the FRT is summarized, and gaps that exist due to the limitations of iterative experimentation alone are identified. The potential of mathematical modeling to complement the characterization and evaluation of diffusion and transport of delivery vehicles and active agents through the CVM and mucosa is discussed. Lastly, potential advancements combining experimental and mathematical knowledge are suggested to inform next-generation NP designs, such that infections in the FRT may be more effectively treated.

Computational Modeling of Antiviral Drug Diffusion from Poly(lactic- co-glycolic-acid) Fibers and Multicompartment Pharmacokinetics for Application to the Female Reproductive Tract

The need for more versatile technologies to deliver antiviral agents to the female reproductive tract (FRT) has spurred the development of on-demand and sustained-release platforms. Electrospun fibers (EFs), in particular, have recently been applied to FRT delivery, resulting in an alternative dosage form with the potential to provide protection and therapeutic effect against a variety of infection types. However, a multitude of fabrication parameters, as well as the resulting complexities of solvent-drug, drug-polymer, and solvent-polymer interactions, are known to significantly impact the loading and release of incorporated agents. Numerous processing parameters, in addition to their combined interactions, can hinder the iterative development of fiber formulations to achieve optimal release for particular durations, doses, and polymer-drug types. The experimental effort to design and develop EFs could benefit from mathematical analysis and computational simulation that predictively evaluate combinations of parameters to meet product design needs. Here, existing modeling efforts are leveraged to develop a simulation platform that correlates and predicts the delivery of relevant small molecule antivirals from EFs that have been recently applied to target sexually transmitted infections (STIs). A pair of mathematical models is coupled to simulate the release of two structurally similar small molecule antiretroviral reverse transcriptase inhibitors, Tenofovir (TFV) and Tenofovir disoproxil fumarate (TDF), from poly(lactic- co-glycolic acid) (PLGA) EFs, and to evaluate how changes in the system parameters affect the distribution of encapsulated agent in a three-compartment model of the vaginal epithelium. The results indicate that factors such as fiber diameter, mesh thickness, antiviral diffusivity, and fiber geometry can be simulated to create an accurate model that distinguishes the different release patterns of TFV and TDF from EFs, and that enables detailed evaluation of the associated pharmacokinetics. This simulation platform offers a basis with which to further study EF parameters and their effect on antiviral release and pharmacokinetics in the FRT.

Label-free analysis of tenofovir delivery to vaginal tissue using co-registered confocal Raman spectroscopy and optical coherence tomography

Vaginally applied microbicide products offer a female-controlled strategy for preventing sexual transmission of HIV. Microbicide transport processes are central to their functioning, and there is a clear need for a better understanding of them. To contribute to that end, we developed an assay to analyze mass transport rates of microbicide molecules within the epithelial and stromal layers of polarized vaginal mucosal tissue during contact with a gel vehicle. The assay utilizes a new diffusion chamber mounted in a custom instrument that combines confocal Raman spectroscopy and optical coherence tomography. This measures depth-resolved microbicide concentration distributions within epithelium and stroma. Data for a tenofovir gel were fitted with a compartmental diffusion model to obtain fundamental transport properties: the molecular diffusion and partition coefficients in different compartments. Diffusion coefficients in epithelium and stroma were computed to be 6.10 ± 2.12 x 10-8 and 4.52 ± 1.86 x 10-7 cm2/sec, respectively. The partition coefficients between epithelium and gel and between stroma and epithelium were found to be 0.53 ± 0.15 and 1.17 ± 0.16, respectively. These drug transport parameters are salient in governing the drug delivery performance of different drug and gel vehicle systems. They can be used to contrast drugs and vehicles during product design, development and screening. They are critical inputs to deterministic transport models that predict the gels' pharmacokinetic performance, which can guide improved design of products and optimization of their dosing regimens.

Multicompartmental Pharmacokinetic Model of Tenofovir Delivery to the Rectal Mucosa by an Enema

Rectal enemas that contain prophylactic levels of anti-HIV microbicides such as tenofovir have emerged as a promising dosage form to prevent sexually transmitted HIV infections. The enema vehicle is promising due to its likely ability to deliver a large amount of drug along the length of the rectal canal. Computational models of microbicide drug delivery by enemas can help their design process by determining key factors governing drug transport and, more specifically, the time history and degree of protection. They can also inform interpretations of experimental pharmacokinetic measures such as drug concentrations in biopsies. The present work begins rectal microbicide PK modeling, for enema vehicles. Results here show that a paramount factor in drug transport is the time of enema retention; direct connectivity between enema fluid and the fluid within rectal crypts is also important. Computations of the percentage of stromal volume protected by a single enema dose indicate that even with only a minute of enema retention, protection of 100% can be achieved after around 14 minutes post dose. Concentrations in biopsies are dependent on biopsy thickness; and control and/or knowledge of thickness could improve accuracy and decrease variability in biopsy measurements. Results here provide evidence that enemas are a promising dosage form for rectal microbicide delivery, and offer insights into their rational design.

Label-Free Measurements of Tenofovir Diffusion Coefficients in a Microbicide Gel Using Raman Spectroscopy

Confocal Raman spectroscopy was implemented in a new label-free technique to quantify molecular diffusion coefficients within gels. A leading anti-HIV drug, tenofovir, was analyzed in a clinical microbicide gel. The gel was tested undiluted, and in 10%-50% wt/wt dilutions with vaginal fluid simulant to capture the range of conditions likely occurring in vivo. The concentration distributions of tenofovir in gel over time and space were measured and input to a mathematical diffusion model to deduce diffusion coefficients. These were 3.16 ± 0.11 × 10^-6 cm²/s in undiluted gel, and increased by 11%-46% depending on the extent of dilution. Results were interpreted with respect to traditional release rate measurements in devices such as Franz cells. This comparison highlighted an advantage of our assay in that it characterizes the diffusive barrier within the gel material itself; in contrast, release rate in the traditional assay is affected by external conditions, such as drug partitioning at the gel/liquid sink interface. This new assay is relevant to diffusion in polymeric hydrogels over pharmacologically relevant length scales, for example, those characteristic of topical drug delivery. Resulting transport parameters are salient measures of drug delivery potential, and serve as inputs to computational models of drug delivery performance.

Pre-exposure prophylaxis: a useful tool to prevent human immunodeficiency virus infection?

The aim of preventive measures against human immunodeficiency virus (HIV) is to reduce the incidence of HIV infection in the general population and in high-risk groups, such as men having sex with men (MSM), and to reduce the risk that a given individual will contract or spread the virus. Male and female condoms, post-exposure prophylaxis and circumcision are preventive methods currently recognized or promoted worldwide. Although modest success has been reported in a phase-III vaccine trial, other methods are being evaluated, such as vaginal and rectal microbicides, and pre-exposure prophylaxis (PrEP). Herein, we discuss results from prevention trials, especially those focusing on PrEP and particularly on recent results from 'on-demand' PrEP regimens. The efficacy of PrEP (rates of 0%-86%) is strongly correlated with adherence and plasma concentrations of antiretrovirals. Adverse events are rare. Selection of emtricitabine-resistant strains is mainly reported in individuals with an undiagnosed HIV infection using PrEP. PrEP is now strongly recommended in WHO prevention programmes for individuals at substantial risk for HIV with a view to controlling this epidemic by 2030.

Coupled gel spreading and diffusive transport models describing microbicidal drug delivery

Gels are a drug delivery platform that is being evaluated for application of active pharmaceutical ingredients, termed microbicides, that act topically against vaginal and rectal mucosal infection by sexually transmitted HIV. Despite success in one Phase IIb trial of a vaginal gel delivering tenofovir, problems of user adherence to designed gel application scheduling have compromised results in two other trials. The microbicides field is responding to this dilemma by expanding behavioral analysis of the determinants of adherence while simultaneously improving the pharmacological, biochemical, and biophysical analyses of the determinants of microbicide drug delivery. The intent is to combine results of these two complementary perspectives on microbicide performance and epidemiological success to create an improved product design paradigm. Central to both user sensory perceptions and preferences, key factors that underlie adherence, and to vaginal gel mucosal drug delivery, that underlies anti-HIV efficacy, are gel properties (e.g. rheology) and volume. The specific engineering problem to be solved here is to develop a model for how gel rheology and volume, interacting with loaded drug concentration, govern the transport of the microbicide drug tenofovir into the vaginal mucosa to its stromal layer. These are factors that can be controlled in microbicide gel design. The analysis here builds upon our current understanding of vaginal gel deployment and drug delivery, incorporating key features of the gel's environment, the vaginal canal, fluid production and subsequent gel dilution, and vaginal wall elasticity. These have not previously been included in the modeling of drug delivery. We consider the microbicide drug tenofovir, which is the drug most completely studied for gels: in vitro, in animal studies in vivo, and in human clinical trials with both vaginal or rectal gel application. Our goal is to contribute to improved biophysical and pharmacological understanding of gel functionality, providing a computational tool that can be used in future vaginal microbicide gel design.

Vaginal drug distribution modeling

This review presents and applies fundamental mass transport theory describing the diffusion and convection driven mass transport of drugs to the vaginal environment. It considers sources of variability in the predictions of the models. It illustrates use of model predictions of microbicide drug concentration distribution (pharmacokinetics) to gain insights about drug effectiveness in preventing HIV infection (pharmacodynamics). The modeling compares vaginal drug distributions after different gel dosage regimens, and it evaluates consequences of changes in gel viscosity due to aging. It compares vaginal mucosal concentration distributions of drugs delivered by gels vs. intravaginal rings. Finally, the modeling approach is used to compare vaginal drug distributions across species with differing vaginal dimensions. Deterministic models of drug mass transport into and throughout the vaginal environment can provide critical insights about the mechanisms and determinants of such transport. This knowledge, and the methodology that obtains it, can be applied and translated to multiple applications, involving the scientific underpinnings of vaginal drug distribution and the performance evaluation and design of products, and their dosage regimens, that achieve it.

Vaginal deployment and tenofovir delivery by microbicide gels

Gels are one of the soft material platforms being evaluated to deliver topically acting anti-HIV drugs (microbicides) to the vaginal environment. For each drug, its loaded concentration, gel properties and applied volume, and frequency of dosing can be designed to optimize PK and, thence, PD. These factors also impact user sensory perceptions and acceptability. Deterministic compartmental modeling of vaginal deployment and drug delivery achieved by test gels can help delineate how multiple parameters characterizing drug, vehicle, vaginal environment, and dosing govern details of PK and PD and also gel leakage from the canal. Such microbicide delivery is a transport process combining convection, e.g., from gel spreading along the vaginal canal, with drug diffusion in multiple compartments, including gel, mucosal epithelium, and stroma. The present work builds upon prior models of gel coating flows and drug diffusion (without convection) in the vaginal environment. It combines and extends these initial approaches in several key ways, including: (1) linking convective drug transport due to gel spreading with drug diffusion and (2) accounting for natural variations in dimensions of the canal and the site of gel placement therein. Results are obtained for a leading microbicide drug, tenofovir, delivered by three prototype microbicide gels, with a range of rheological properties. The model includes phosphorylation of tenofovir to tenofovir diphosphate (which manifests reverse transcriptase activity in host cells), the stromal concentration distributions of which are related to reference prophylactic values against HIV. This yields a computed summary measure related to gel protection ("percent protected"). Analyses illustrate tradeoffs amongst gel properties, drug loading, volume and site of placement, and vaginal dimensions, in the time and space history of gel distribution and tenofovir transport to sites of its anti-HIV action and concentrations and potential prophylactic actions of tenofovir diphosphate therein.

Co-localized confocal Raman spectroscopy and optical coherence tomography (CRS-OCT) for depth-resolved analyte detection in tissue

We report the development of a combined confocal Raman spectroscopy (CRS) and optical coherence tomography (OCT) instrument (CRS-OCT) capable of measuring analytes in targeted biological tissues with sub-100-micron spatial resolution. The OCT subsystem was used to measure depth-resolved tissue morphology and guide the acquisition of chemically-specific Raman spectra. To demonstrate its utility, the instrument was used to accurately measure depth-resolved, physiologically-relevant concentrations of Tenofovir, a microbicide drug used to prevent the sexual transmission of HIV, in ex vivo tissue samples.

Comprehensive review on additives of topical dosage forms for drug delivery

Skin is the largest organ of the human body and plays the most important role in protecting against pathogen and foreign matter. Three important modes such as topical, regional and transdermal are widely used for delivery of various dosage forms. Among these modes, the topical dosage forms are preferred because it provides local therapeutic activity when applied to the skin or mucous membranes. Additives or pharmaceutical excipients (non-drug component of dosage form) are used as inactive ingredients in dosage form or tools for structuring dosage forms. The main use of topical dosage form additives are controling the extent of absorption, maintaining the viscosity, improving the stability as well as organoleptic property and increasing the bulk of the formulation. The overall goal of this article is to provide the clinician with information related to the topical dosage form additives and their current major applications against various diseases.

Quantitative analysis of microbicide concentrations in fluids, gels and tissues using confocal Raman spectroscopy

Topical vaginal anti-HIV microbicides are an important focus in female-based strategies to prevent the sexual transmission of HIV. Understanding microbicide pharmacokinetics is essential to development, characterization and implementation of efficacious microbicide drug delivery formulations. Current methods to measure drug concentrations in tissue (e.g., LC-MS/MS, liquid chromatography coupled with tandem mass spectrometry) are highly sensitive, but destructive and complex. This project explored the use of confocal Raman spectroscopy to detect microbicide drugs and to measure their local concentrations in fluids, drug delivery gels, and tissues. We evaluated three candidate microbicide drugs: tenofovir, Dapivirine and IQP-0528. Measurements were performed in freshly excised porcine buccal tissue specimens, gel vehicles and fluids using two Horiba Raman microscopes, one of which is confocal. Characteristic spectral peak calibrations for each drug were obtained using serial dilutions in the three matrices. These specific Raman bands demonstrated strong linear concentration dependences in the matrices and were characterized with respect to their unique vibrational signatures. At least one specific Raman feature was identified for each drug as a marker band for detection in tissue. Sensitivity of detection was evaluated in the three matrices. A specific peak was also identified for tenofovir diphosphate, the anti-HIV bioactive product of tenofovir after phosphorylation in host cells. Z-scans of drug concentrations vs. depth in excised tissue specimens, incubated under layers of tenofovir solution in a Transwell assay, showed decreasing concentration with depth from the surface into the tissue. Time-dependent concentration profiles were obtained from tissue samples incubated in the Transwell assay, for times ranging 30 minutes - 6 hours. Calibrations and measurements from tissue permeation studies for tenofovir showed good correlation with gold standard LC-MS/MS data. These results demonstrate that confocal Raman spectroscopy holds promise as a tool for practical, minimally invasive, label-free measurement of microbicide drug concentrations in fluids, gels and tissues.