Vascular Ageing in Youth: A Call to Action

Extensive evidence shows that risk factors for cardiovascular disease (CVD) begin to develop early in life. Childhood obesity and elevated blood pressure (BP) have become overwhelmingly challenging, with 57% of today's children predicted to be obese by the age of 35 years, and global rates of hypertension in children and adolescents increasing by 75% from 2000 to 2015. Thus, there is an urgent need for tools that can assess early CVD risk in youth, which may lead to better risk stratification, preventative intervention, and personalised medicine. Vascular ageing (the deterioration in vascular structure and function) is a pivotal progenitor of health degeneration associated with elevated BP. Exposure to adverse environmental and genetic factors from fetal life promotes the development and accumulation of subclinical vascular changes that direct an individual towards a trajectory of early vascular ageing (EVA)-an independent predictor of target organ damage in the heart, brain, and kidneys. Therefore, characterising vascular ageing from youth may provide a window into cardiovascular risk later in life. However, vascular ageing measurements only have value when techniques are accurate/validated and when reliable thresholds are available for defining normal ranges and ranges that signal increased risk of disease. The aim of this paper is to summarise current evidence on the importance of vascular ageing assessment in youth and the impact of interventions to prevent or delay EVA, to highlight the need for standardisation and validation of measurement techniques in children and adolescents, and the importance of establishing reference values for vascular ageing measures in this population.

Antibiotic Prophylaxis in Surgery: An Observational Prospective Study Conducted in a Large Teaching Hospital in Naples

This was a 9-month observational prospective study conducted in two steps to evaluate surgical prophylaxis procedures used by surgeons in several departments of the Second University of Naples (SUN). In step 1 (4 months), we collected and analyzed data on surgical interventions and antibiotic prophylaxis. Surgeons were informed of the analysis outcome and were given an antibiotic prophylaxis protocol based on international guidelines. In step 2 (5 months), we collected data on surgical interventions and antibiotic prophylaxis, and compared them with step 1 data. The analysis of 354 forms (step 1) showed that third-generation cephalosporins were the preferred prophylactic antibiotics. The analysis of 369 forms (step 2) showed that ceftriaxone and ampicillin were the most frequently used antibiotics. Surgeons did not comply with guidelines for antibiotic prophylaxis as regards type of antibiotic and treatment duration but implementation of antibiotic prophylaxis protocols resulted in more appropriate and better timing of antibiotic prophylaxis.

Effect of bifurcation angle configuration and ratio of daughter diameters on hemodynamics of bifurcation aneurysms

BACKGROUND AND PURPOSE

EL associated with ruptured aneurysms is higher than that for unruptured aneurysms. In this study, the effect of arterial morphologic variation of bifurcation aneurysms on EL was investigated in idealized models of middle cerebral artery aneurysms.

MATERIALS AND METHODS

Bifurcation angle configuration and DA ratio were evaluated in 6 idealized numeric models. Type A and B bifurcation models were defined with symmetric and asymmetric bifurcation angles of 136°, and 57° and 79°, respectively. Three models with DA ratios of 1, 1.3, and 2 were constructed for each type. EL was calculated as the energy difference between aneurysm inflow and outflow at the aneurysm neck. Three growth paths (R1, R2, and R3) were proposed.

RESULTS

The highest EL and influx occurred in bifurcations with DA ratios of 1 for both types A and B. As the DA ratio increases, flow distribution between branches becomes more asymmetric, resulting in a reduction of EL and intra-aneurysmal flow. No strong relation was found between bifurcation angle configuration, inflow flux, and EL. EL decreased with an increase in the AR and DA ratio and increased with an increase in the AR and reduction of DA ratio.

CONCLUSIONS

EL determined in idealized models is less dependent on bifurcation angle configuration than on DA ratio, and the stability of the aneurysm strongly depends on variation of the daughter artery morphology after aneurysm growth.

Effect of inflow on computational fluid dynamic simulation of cerebral bifurcation aneurysms

Morphological characteristics associated with cerebral aneurysm formation can be used to assess aneurysm rupture. This study investigated hemodynamic effects resulting from change in the parent artery diameter of bifurcation type aneurysm. Computational fluid dynamic (CFD) analysis was performed on middle cerebral artery (MCA) models with various parent artery diameters. Calculations were performed with steady flow rate (125 ± 12.5 ml/min) at the parent artery inlet. Energy loss (EL) was calculated from pressure and kinetic energy obtained from flow velocity. The results indicate that the high wall shear stress (WSS) and EL occurs in model with the smallest parent vessel compared to the other models for all three inflows. Results also showed that 10% variation of inflow results in average of 23 ± 2.9% changes in WSS and 25.5 ± 0.5% changes in energy loss. These results demonstrated that for CFD analysis of MCA bifurcation type aneurysm, upstream parent vessel and inflow evaluation for individual patient is essential.

Effect of saccular aneurysm and parent artery morphology on hemodynamics of cerebral bifurcation aneurysms

Morphological descriptors of aneurysms have been used to assess aneurysm rupture. This study investigated the relation between the morphological parameters and the flow related parameter of energy loss (EL). Four size indices and one shape index were assessed in idealized middle cerebral artery models with various aneurysm morphologies. Four patient-specific aneurysms (2 ruptured, 2 unruptured) were virtually manipulated by removing the aneurysms from their parent arteries and merging them with the idealized bifurcation models. EL was calculated from the energy difference between inflow and outflow. The results indicate that among size indices, EL is mostly dependent on bottleneck factor and less dependent on the aspect ratio. Results also showed that there is a direct relationship between nonsphericity index (NSI) and EL in manipulated models. No specific correlation was found between EL and NSI in patient-specific models.

In vitro and in vivo tissue repair with laser-activated chitosan adhesive

BACKGROUND AND OBJECTIVES

Sutures are currently the gold standard for wound closure but they are still unable to seal tissue and may induce scarring or inflammation. Biocompatible glues, based on polysaccharides such as chitosan, are a possible alternative to conventional wound closure. In this study, the adhesion of laser-activated chitosan films is investigated in vitro and in vivo. In particular we examine the effect of varying the laser power, as well as adding a natural cross-linker (genipin) to the adhesive composition.

STUDY DESIGN/MATERIALS AND METHODS

Flexible and insoluble strips of chitosan films (surface area approximately 34 mm(2), thickness approximately 20 microm) were bonded to sheep intestine using several laser powers (0, 80, 120, and 160 mW) at 808-nm wavelength. The strength of repaired tissue was tested by a calibrated tensiometer to select the best power. A natural cross-linker (genipin) was also added to the film and the tissue repair strength compared with the strength of plain films. The adhesive was also bonded in vivo to the sciatic nerve of rats and the thermal damage induced by the laser assessed 4 days post-operatively.

RESULTS

Chitosan adhesives successfully repaired intestine tissue, attaining a maximum repair strength of 14.7+/-4.3 kPa (n = 30) at the laser power of 120 mW. The chitosan-genipin films achieved lower repair strength (9.1+/-2.9 kPa). The laser caused partial demyelination of axons at the site of operation, but the myelinated axons retained a normal morphology proximally and distally.

CONCLUSIONS

The chitosan adhesive effectively bonded to tissue causing only localized thermal damage in vivo, when the appropriate laser parameters were selected.

Chitosan adhesive for laser tissue repair: in vitro characterization

BACKGROUND AND OBJECTIVES

Laser tissue repair usually relies on hemoderivate protein solders, based on serum albumin. These solders have intrinsic limitations that impair their widespread use, such as limited tensile strength of repaired tissue, poor solder solubility, and brittleness prior to laser denaturation. Furthermore, the required activation temperature of albumin solders (between 65 and 70 degrees C) can induce significant thermal damage to tissue. In this study, we report on the design of a new polysaccharide adhesive for tissue repair that overcomes some of the shortcomings of traditional solders.

STUDY DESIGN/MATERIALS AND METHODS

Flexible and insoluble strips of chitosan adhesive (elastic modulus approximately 6.8 Mpa, surface area approximately 34 mm2, thickness approximately 20 microm) were bonded onto rectangular sections of sheep intestine using a diode laser (continuous mode, 120 +/- 10 mW, lambda = 808 nm) through a multimode optical fiber with an irradiance of approximately 15 W/cm2. The adhesive was based on chitosan and also included indocyanin green dye (IG). The temperature between tissue and adhesive was measured using a small thermocouple (diameter approximately 0.25 mm) during laser irradiation. The repaired tissue was tested for tensile strength by a calibrated tensiometer. Murine fibroblasts were cultured in extracted media from chitosan adhesive to assess cytotoxicity via cell growth inhibition in a 48 hours period.

RESULTS

Chitosan adhesive successfully repaired intestine tissue, achieving a tensile strength of 14.7 +/- 4.7 kPa (mean +/- SD, n = 30) at a temperature of 60-65 degrees C. Media extracted from chitosan adhesive showed negligible toxicity to fibroblast cells under the culture conditions examined here.

CONCLUSION

A novel chitosan-based adhesive has been developed, which is insoluble, flexible, and adheres firmly to tissue upon infrared laser activation.

Albumin-genipin solder for laser tissue repair

BACKGROUND

Laser tissue soldering (LTS) is an alternative technique to suturing for tissue repair that avoids foreign body reaction and provides immediate sealing of the wound. One of the major drawbacks of LTS, however, is the weak tensile strength of the solder welds when compared to sutures. In this study, a crosslinking agent of low cytotoxicity was investigated for its ability to enhance the bond strength of albumin solders with sheep intestine.

STUDY DESIGN/MATERIALS AND METHODS

Solder strips were welded onto rectangular sections of sheep small intestine using a diode laser. The laser delivered in continuous mode a power of 170 +/- 10 mW at lambda = 808 nm, through a multimode optical fiber (core size = 200 microm) to achieve a dose of 10.8 +/- 0.5 J/mg. The solder thickness and surface area were kept constant throughout the experiment (thickness = 0.15 +/- 0.01 mm, area = 12 +/- 1.2 mm2). The solder was composed of 62% bovine serum albumin (BSA), 0.38% genipin, 0.25% indocyanin green dye (IG), and water. Tissue welding was also performed with a BSA solder without genipin, as a control group. The repaired tissue was tested for tensile strength by a calibrated tensiometer. Murine fibroblasts were also cultured in extracted media from heat-denatured genipin solder to assess cell growth inhibition in a 48 hours period.

RESULTS

The tensile strength of the genipin solder was doubled that of the BSA solder (0.21 +/- 0.04 N and 0.11 +/- 0.04 N, respectively; P = 10(-15) unpaired t-test, N = 30). Media extracted from crosslinked genipin solder showed negligible toxicity to fibroblast cells under the culture conditions examined here.

CONCLUSION

Addition of a chemical crosslinking agent, such as genipin, significantly increased the tensile strength of adhesive-tissue bonds. A proposed mechanism for this enhanced bond strength is the synergistic action of mechanical adhesion with chemical crosslinking by genipin.

Interferon-induced depression: prevalence and management

BACKGROUND

Interferon-induced depression ranges from 0 to 50%. Interferon schedule and a history of psychiatric illnesses are not enough to predict who will develop symptoms and who will not.

AIMS

To assess the prevalence of depression during interferon therapy; to test whether Minnesota Multiphasic Personality Inventory is useful in clinical practice for the early identification of patients at risk of depression; whether and how the depression can be cured.

PATIENTS

One hundred and eighty-five patients treated with interferon and ribavirin for chronic hepatitis C.

METHODS

Before therapy, all patients underwent a Minnesota Multiphasic Personality Inventory and a clinical examination, specifically for the identification of depressive symptoms.

RESULTS

Thirty-one patients developed a psychiatric disorder, 11 of them requiring treatment with anti-depressant drugs. Among the 18 patients with Minnesota Multiphasic Personality Inventory positive tests, 16 developed a psychiatric disorder, 8 of them a severe disorder (sensitivity of 0.58; 0.73 for severe disorders). Among the 154 who did not develop psychiatric side effects, 152 had a negative Minnesota Multiphasic Personality Inventory (specificity: 0.99). Severe psychiatric disorders were successfully treated with anti-depressant drugs.

CONCLUSIONS

Psychiatric side effects are easy to see during interferon therapy. A psychiatric evaluation should be considered on all patients before treatment. If depression develops, it should be treated aggressively, and selective serotonin re-uptake inhibitors are the anti-depressants of choice.

Estimation of pressure pulse amplification between aorta and brachial artery using stepwise multiple regression models

The pressure pulse is amplified between the aorta and peripheral sites. This study compares two methods to estimate pressure pulse amplification (PPA) between the aorta and the brachial artery. Method 1: PPA was determined from a multi-parameter linear regression of subject parameters (gender, age, height, weight, heart rate (HR), brachial systolic pressure (BSP), diastolic pressure (BDP), mean pressure (MP)). Method 2: PPA was calculated from central aortic pressure waveforms (CW) estimated from the same subject parameters. The sample population (1421 male, 992 female) was selected from a database where aortic pressure was estimated by mathematical transformation of a peripheral (radial) pulse calibrated to sphygmomanometric BSP and BDP. The two methods were consistent in showing HR and MP as the most important parameters to estimate PPA. Correlation coefficients (R2) of 0.48 (method 1) and 0.44 (method 2) were obtained using height, weight, HR, BSP, BDP and age. Inclusion of MP increased R2 to 0.77 (method 1) and 0.71 (method 2). This study shows that databases containing peripheral and central aortic pressure waveforms can be used to construct multiple regression models for PPA estimation. These models could be applied to studies of similar subject groups where peripheral waveforms may not be available.

Equipotential earthing study: equipotential wiring is unnecessary

This study was undertaken to determine the ongoing need for Equipotential (EP) earthing as required in AS/NZS 3003, section 4.4.2. A total of 2279 earth points were tested in four clinical institutions in Body Protected areas (as defined in AS/NZS 3003). Each earth point was tested for potentials existing in the earthing in order to assess whether any potentials exceeded the 100 mV requirement of AS/NZS 3003 for EP earthing. The voltage measured was 1.21 mV +/- 3.59 mV, (mean +/- standard deviation (SD)), with a of 99 % confidence interval between 1.0 mV and 1.4 mV. This study suggests that the requirements for EP earthing in section 4.4.2 of AS/NZS 3003 are unnecessary. It is further suggested that Standards Australia review these requirements with the view of withdrawing them from the Standard.

Peripheral "oscillatory" compliance is associated with aortic augmentation index

The augmentation index (AIx) and "oscillatory" compliance (C(2)) are wave contour analysis parameters for the central aorta (P(ao)) and radial artery pressure wave (P(rad)), respectively. Both are sensitive to cardiovascular risk factors such as aging, hypertension, and diabetes and have been proposed as prognostic markers for cardiovascular disease. In this work, we studied the relation between both. We first calculated P(rad) corresponding to a typical aortic A-type (AIx >0.15) and C-type wave (AIx <0), taken from the literature, by using a generalized aorta-radial pressure transfer function. P(rad) corresponding to C-type waves yielded the highest C(2) value. We further used simultaneously measured aortic and radial artery pressure in 45 human subjects age 34 to 84 years (63+/-12 [SD]) at baseline and after administration of nitroglycerin to calculate AIx(meas) and C(2), respectively. Transfer function was used to calculate reconstructed aortic pressure and AIx(rec). AIx(rec) underestimates AIx(meas) by 0.03+/-0.16, but both values correlate well (r=0.64; P<0.001). C(2) and AIx were inversely correlated (r=-0.36; P<0.001 for AIx(meas); r=-0.30; P<0.01 for AIx(rec)). Both AIx(meas) (0.06+/-0.17 versus 0.20+/-0.21; P<0.01) and AIx(rec) (0.04+/-0.12 versus 0.16+/-0.16; P<0.001) were lower after nitroglycerin, whereas C(2) increased only nonsignificantly (0.080+/-0.036 versus 0.071+/-0.042). C(2) is related to AIx and reflects, at least in part, hemodynamic changes affecting central aortic pressure. Nevertheless, given the model assumptions and computational steps associated with calculating C(2), AIx could be a more appropriate parameter to use in the clinical setting because it is determined directly from the pressure wave contour.

Quantification of alterations in structure and function of elastin in the arterial media

The structure of medial elastin determines arterial function and affects wall mechanical properties. The aim of this study was to (1) characterize the structure of elastin in terms of textural features, (2) relate structural parameters to total number of cardiac cycles (TC), and (3) determine the contribution of medial elastin to lumen mechanical stress. Images of pressure-fixed aortic sections stained for elastin were obtained from specimens collected postmortem from 35 animals of different species with a wide range of age, heart rate, and TC and divided into 2 groups: TClow=3.69+/-0.38x10(8) (n=17) and TChigh=15.8+/-2.38x10(8) (n=18) (P<0.001). A directional fractal curve was generated for each image, and image texture was characterized by directional fractal curve parameters. Elastin volume fraction and interlamellar distance were obtained by image analysis. Wall stress distribution was determined from a finite element model of the arterial wall with multiple layers simulating elastin lamellae. DFC amplitude was related to elastin volume fraction. Increased TC (TClow versus TChigh) was associated with lower directional fractal curve amplitude (0.23+/-0.02 versus 0.14+/-0.02; P<0.001), reduced elastin volume fraction (36.5+2.6% versus 25.7+2.1%; P<0.01), and increased interlamellar distance (8.5+/-0.5 versus 11.5+/-1.0 microm; P<0.05). Loss of medial elastic function increased pressure-dependent maximal circumferential stress. Structural alterations of medial elastin, quantified by fractal parameters, are associated with cumulative effects of repeated pulsations due to the combined contribution of age and heart rate. Loss of medial functional elasticity increases luminal wall stress, increasing the possibility of endothelial damage and predisposition to atherosclerosis.

[Effects of PGE1 (alprostadil alpha-cyclodestrin) in a case of probable paraneoplastic thrombocytopenic purpura]

The authors report the case of a severely vasculopathic patient with pulmonary mediastinal tumour who presented, probably on a paraneoplastic basis, the onset of severe thrombocytopenic purpura persisting for several months. The syndrome was not classifiable in any of the forms known to the authors and was completely resolved by treatment with PGE1 (alprostadil-alpha-cyclodextrine (Prostavasin, Schwarz Pharma).

Genetic and environmental factors in the function and structure of the arterial wall

In large arteries the structure of the arterial wall determines pulsatile hemodynamics of pressure and flow. Mechanical wall stiffness, wall thickness, and elastin and collagen content vary along the arterial tree. The contribution of genetic and environmental factors to such structural properties is not yet known, but some data are available on possible functional correlates. In hypertensive rats diastolic and pulse pressure have been shown to be linked to two different genes on separate chromosomes. Although a genetic component contributes to intimal calcification, medial hypertrophy is not associated with genetic factors. A study of French West Indies families showed a preferential genetic determinant for pulse pressure in contrast to systolic or diastolic pressure. Environmental and geographic factors are associated with markedly different prevalences of hypertension and age-related increases in arterial stiffening in urban and rural communities in China. Salt consumption has also been implicated in modifications of pulse wave velocity. Recent data on structural parameters of the aortic trunk in oriental (Chinese) and occidental (American and Australian) subjects have shown that the ascending aorta in oriental subjects is of a relatively large diameter and thinner media. This suggests that in this population a relatively higher primary pressure pulse would be generated because of increased stiffness of the proximal aorta. This suggests that factors other than arterial pressure are responsible for structural differences in the aortic wall and that oriental populations may have a predisposition to increased arterial pressure based on structural factors that affect the interaction between ventricular ejection and arterial load.

Acetabular osteolysis in total hip arthroplasty: prevention and treatment

Osteolysis can occur around loose, as well as well fixed, cemented or cementless acetabular components in total hip arthroplasty. Histologic studies of tissues biopsied from osteolytic regions suggest an adverse foreign body response to polyethylene and other particulate debris from prosthetic materials. Phagocytosis of these particles by macrophages and giant cells stimulate the production of proteolytic enzymes and inflammatory mediators, all leading to tissue destruction. The importance of polyethylene wear debris is now fully appreciated, and it is clear that this is the major contributor to particulate debris. The authors strongly recommend the avoidance of 32 mm femoral heads, thin acetabular component liners, titanium heads, and acetabular screws when absolutely necessary. We strongly advise 26 mm to 28 mm femoral heads, polyethylene thickness of at least 8 mm, precise liner shell contact, rigid fixation of the acetabular metal shell, intimate bone-acetabular shell contact, and circumferential porous coating of femoral components to decrease the amount of and migration potential of polyethylene debris (Table). Based on our current knowledge, these measures will minimize the problem of acetabular osteolysis.

Enzymatic determinations in acute rejection after liver transplantation: preliminary report on necrosis index

The catalytic activities of some mitochondrial and cytoplasmic enzymes were measured in plasma from 19 patients after orthotopic liver transplantation, in order to detect and monitor the evolution of hepatocellular damage and to predict liver rejection. The enzymatic activities determined were: mitochondrial isoenzyme of aspartate aminotransferase, glutamate dehydrogenase, alanine aminotransferase, aspartate aminotransferase, gamma-glutamyltranspeptidase and alkaline phosphatase. The results of all enzymatic activities were normalized by expressing them as multiples of the upper limit of the relevant reference range and then the necrosis index (NI) has been calculated. The proposed NI consists of percent ratio of the normalized mitochondrial enzymatic activities over the sum of cytoplasmic and mitochondrial normalized activities. We observed that NI values higher than 30% correctly identified all but two acute rejection events which were documented by liver biopsies showing a diagnostic sensitivity of 90%, specificity of 78% and a predictive value of 90%.

Ageing and wave reflection

AIM

To determine the effects of wave reflection on the increase in arterial pressure that occurs with age and its association with concomitant changes in both the magnitude and contour of the arterial pressure pulse.

RESULTS OF DATA SURVEY

While age-related changes in mean pressure are similar in central and peripheral arteries, changes in pulse pressure and pulse waveform features are different. Because of the specific architectural, geometrical and elastic properties of the arterial vasculature, wave reflection plays an important role in determining peak pressure, the value usually specified as systolic pressure. While the late systolic increase usually determines peak systolic pressure in the central aorta, it is not necessarily related to the peak pressure in the periphery. Peak pressure depends on the timing and intensity of wave reflection, which is a function of the state of the peripheral microvasculature and the elastic properties of the large conduit arteries. Ageing causes changes in both the terminal and central vasculature, so that the intensity of the wave reflection and the transmission properties of arteries affect the arterial pulse to different degrees. Therefore, age-related changes that are observed in the central pressure pulse are different from those observed in the pulse when measured in a limb. Thus the contribution of wave reflection to the determination of peak arterial pressure is not the same at all locations.

CONCLUSIONS

These findings have profound implications for therapeutic strategies aimed at altering systolic pressure and for a proper assessment of the alteration in cardiac load that occurs with age or with antihypertensive therapy, when measurements are taken in a limb.

Factors influencing long-term results in high tibial osteotomy

Recorded here is a comprehensive review of the current literature on high tibial osteotomy with emphasis on postponing an inevitable total knee arthroplasty (TKA). Accompanying this review is a confirmatory, retrospective study of 35 patients with 39 high tibial osteotomies with an average follow-up study of 8.5 years (range, 3.8-15.1 years). Twenty-two of the patients (57%) had good results, seven (18%) fair, and ten (25%) poor at final follow-up examination. Nine of the 35 patients required TKA at an average of 4.7 years post-osteotomy. The percentage of good results diminished with time of follow-up study, starting at two years with 87% good results and ending at 15 years with only 57% of the patients remaining in that category. Patients lost an average of 8 degrees of flexion post-osteotomy, regardless of good, fair, or poor result. Patients with favorable results were usually younger than 60 years of age, and had less than 12 degrees of angular deformity, pure unicompartmental disease, ligamentous stability, and a preoperative range of motion are of at least 90 degrees.

Echocardiographic and electrocardiographic study of the normal kangaroo heart

Healthy kangaroos are prone to sudden death. To investigate possible causes of this phenomenon, echocardiographic and electrocardiographic studies were conducted in seven healthy sedated (intramuscular ketamine 20 mg/kg, xylazine 2 mg/kg) kangaroos aged 1.5-5 years weighing 5.5-48 kg. As in human hypertrophic cardiomyopathy, kangaroos showed relative left ventricular hypertrophy measured as a ratio of (internal left ventricular end-diastolic diameter)/(septal + posterior wall thickness): 1.7 (SD 0.2) in kangaroos and 1.3 (SD 0.4) in hypertrophic cardiomyopathy cf 2.6 (SD 0.6) in normal man (p less than 0.001 respectively). Peak left ventricular diastolic filling velocity was smaller in kangaroos (2.6 (SD 0.3)/sec) and hypertrophic cardiomyopathy (3.3 (SD 0.7)/sec) than in normal man (4.1 (SD 1.0)/sec) (p less than 0.01, p less than 0.05). The end of T wave occurred earlier than the closing of aortic valve. Corrected QT interval (0.20 (SD 0.02) sec) was shorter than the normal value for man (0.34-0.40 sec). In conclusion, kangaroos have cardiac hypertrophy of unknown aetiology, with impaired diastolic function, as in non-obstructive hypertrophic cardiomyopathy patients. Corrected QT interval was short. These echocardiographic and electrocardiographic findings may explain the mechanism of sudden death in kangaroos, a species which may be used as an experimental model of non-obstructive hypertrophic cardiomyopathy in man.

Noninvasive determination of age-related changes in the human arterial pulse

Arterial pressure waves were recorded noninvasively from the carotid, radial, femoral, or all three of these arteries of 1,005 normal subjects, aged 2-91 years, using a new transcutaneous tonometer containing a high fidelity Millar micromanometer. Waves were ensemble-averaged into age-decade groups. Characteristic changes were noted with increasing age. In all sites, pulse amplitude increased with advancing age (carotid, 91.3%; radial 67.5%; femoral, 50.1% from first to eighth decade), diastolic decay steepened, and diastolic waves became less prominent. In the carotid pulse, there was, in youth, a second peak on the downstroke of the waves in late systole. After the third decade, this second peak rose with age to merge with and dominate the initial rise. In the radial pulse, a late systolic wave was also apparent, but this occurred later; with age, this second peak rose but not above the initial rise in early systole, even at the eighth decade. In the femoral artery, there was a single systolic wave at all ages. Aging changes in the arterial pulse are explicable on the basis of both an increase in arterial stiffness with increased pulse-wave velocity and progressively earlier wave reflection. These two factors may be separated and effects of the latter measured from pressure wave-contour analysis using an "augmentation index," determined by a computer algorithm developed from invasive pressure and flow data. Changes in peak pressure in the central (carotid) artery show increasing cardiac afterload with increasing age in a normal population; this can account for the cardiac hypertrophy that occurs with advancing age (even as other organs atrophy) and the predisposition to cardiac failure in the elderly. Identification of mechanisms responsible offers a new approach to reduction of left ventricular afterload.

Arterial dilation and reduced wave reflection. Benefit of dilevalol in hypertension

We compared dilevalol (an isomer of labetalol), 200-400 mg daily, against atenolol, 50-100 mg daily, in a double-blind, crossover, placebo-controlled trial with respect to effects on arterial distensibility (measured as pulse wave velocity [PWV]) and wave reflection (assessed from carotid pressure wave contour). Twelve patients of mean age 58 years (range 44-73 years) with essential hypertension (supine diastolic blood pressure 95-114 mm Hg) took active therapy for 12 weeks, separated by a 2-4 week placebo period. Carotid pressure waveforms were recorded noninvasively by applanation tonometry with a Millar micromanometer-tipped probe. PWV was measured between carotid and femoral arteries (aortic PWV), carotid and radial arteries (arm PWV), and femoral and pedal arteries (leg PWV). Early wave reflection was calculated from the ratio of the height of the peak of the carotid wave above its shoulder to the pulse pressure and was expressed as an augmentation index. Both drugs were equally effective in reducing brachial sphygmomanometric pressure and PWV in all three regions (active vs. placebo, p less than 0.001), but there was no significant difference between the two active therapies. However, the augmentation index (averaged during the treatment period) was significantly lower with dilevalol (19%) than with atenolol (28%, p less than 0.01), corresponding to a greater decrease of 5-8 mm Hg in carotid systolic pressure compared with the brachial artery. Although both drugs were equally effective in reducing arterial distensibility, the vasodilating action of dilevalol gave added benefit in reducing wave reflection, presumably through its vasodilatory effect on peripheral conduit arteries.

Effect of glyceryl trinitrate on peripheral arteries alters left ventricular hydraulic load in man

Effects of sublingual glyceryl trinitrate (GTN) were studied in ten patients without heart failure during diagnostic cardiac catheterisation following angiography. GTN caused substantial reduction in peak left ventricular and aortic pressure (19 mmHg) with lesser reduction in mean aortic pressure (9 mmHg) and no change in diastolic aortic pressure. Reduction in stroke volume (by 15%), associated with fall in left ventricular end diastolic pressure (by 4 mmHg) was insufficient to explain the marked (17 mmHg - 34%) reduction in pulse pressure. Decrease in pulse pressure was associated with loss of the late systolic peak on both the aortic and left ventricular pressure wave. This peak is caused by pulse wave reflection. GTN caused no change in peripheral resistance or in indices of aortic compliance (characteristic impedance, total arterial compliance) but was associated with reduction in fluctuations of both modulus and phase of aortic impedance. All these changes in pressure waves and in impedance spectra are explicable on the basis of decreased peripheral wave reflection. This can be attributed to the known vasodilatory effect of GTN on the peripheral arteries. Simulation of arterial vasodilatation in a multi-branched model of the systemic arterial system confirmed this interpretation. Dilatation of peripheral arteries explains in part the beneficial effects of GTN in adult man.