Three-dimensional printed pure-titanium implantation for chest wall reconstruction involving the sternum and ribs: a novel approach

Chest wall reconstruction is challenging due to the complex shape and large defect size. The three-dimensional printing technology enables the fabrication of customized implants, and 3D-printed pure-titanium could provide superior mechanical properties to conventional materials. The aim of this study was to evaluate long-term outcomes of patients undergoing chest wall reconstruction with a 3D-printed pure-titanium implant. Between August 2018 and May 2021, 5 patients underwent surgery due to sternal metastasis (n = 3), postoperative sternal wound infection (n = 1) and deformity (n = 1). The customized implant was designed and constructed based on the size and shape of the chest wall defect measured on computed tomography. All patients demonstrated uneventful recovery without complications during the hospital course. During the median follow-up of 20 months, 1 patient underwent revision surgery due to implant breakage, and 1 removed the implant due to trauma-related chest wall infection. One patient died from cancer progression, while 3 patients are alive without any implant-related complications. Chest wall reconstruction using a 3D-printed pure-titanium implant could be a novel alternative for patients with various conditions affecting the sternum and ribs.

Emergence of the isotropic Kitaev honeycomb latticeα-RuCl3and its magnetic properties

We present a comprehensive investigation of the crystal and magnetic structures of the van der Waals antiferromagnetα-RuCl3using single crystal x-ray and neutron diffraction. The crystal structure at room temperature is a monoclinic (C2/m). However, with decreasing temperature, a remarkable first-order structural phase transition is observed, leading to the emergence of a rhombohedral (R3-) structure characterized by three-fold rotational symmetry forming an isotropic honeycomb lattice. On further cooling, a zigzag-type antiferromagnetic order develops belowTN=6∼6.6K. The critical exponent of the magnetic order parameter was determined to beβ=0.11(1), which is close to the two-dimensional Ising model. Additionally, the angular dependence of the magnetic critical field of the zigzag antiferromagnetic order for the polarized ferromagnetic phase reveals a six-fold rotational symmetry within theab-plane. These findingsreflect the symmetry associated with the Ising-like bond-dependent Kitaev spin interactions and underscore the universality of the Kitaev interaction-dominated antiferromagnetic system.

Ribonanza: deep learning of RNA structure through dual crowdsourcing

Prediction of RNA structure from sequence remains an unsolved problem, and progress has been slowed by a paucity of experimental data. Here, we present Ribonanza, a dataset of chemical mapping measurements on two million diverse RNA sequences collected through Eterna and other crowdsourced initiatives. Ribonanza measurements enabled solicitation, training, and prospective evaluation of diverse deep neural networks through a Kaggle challenge, followed by distillation into a single, self-contained model called RibonanzaNet. When fine tuned on auxiliary datasets, RibonanzaNet achieves state-of-the-art performance in modeling experimental sequence dropout, RNA hydrolytic degradation, and RNA secondary structure, with implications for modeling RNA tertiary structure.

Recent progress of exciton transport in two-dimensional semiconductors

Spatial manipulation of excitonic quasiparticles, such as neutral excitons, charged excitons, and interlayer excitons, in two-dimensional semiconductors offers unique capabilities for a broad range of optoelectronic applications, encompassing photovoltaics, exciton-integrated circuits, and quantum light-emitting systems. Nonetheless, their practical implementation is significantly restricted by the absence of electrical controllability for neutral excitons, short lifetime of charged excitons, and low exciton funneling efficiency at room temperature, which remain a challenge in exciton transport. In this comprehensive review, we present the latest advancements in controlling exciton currents by harnessing the advanced techniques and the unique properties of various excitonic quasiparticles. We primarily focus on four distinct control parameters inducing the exciton current: electric fields, strain gradients, surface plasmon polaritons, and photonic cavities. For each approach, the underlying principles are introduced in conjunction with its progression through recent studies, gradually expanding their accessibility, efficiency, and functionality. Finally, we outline the prevailing challenges to fully harness the potential of excitonic quasiparticles and implement practical exciton-based optoelectronic devices.

High-precision measurement of the W boson mass with the CDF II detector

The mass of the W boson, a mediator of the weak force between elementary particles, is tightly constrained by the symmetries of the standard model of particle physics. The Higgs boson was the last missing component of the model. After observation of the Higgs boson, a measurement of the W boson mass provides a stringent test of the model. We measure the W boson mass, M_W, using data corresponding to 8.8 inverse femtobarns of integrated luminosity collected in proton-antiproton collisions at a 1.96 tera-electron volt center-of-mass energy with the CDF II detector at the Fermilab Tevatron collider. A sample of approximately 4 million W boson candidates is used to obtain [Formula: see text], the precision of which exceeds that of all previous measurements combined (stat, statistical uncertainty; syst, systematic uncertainty; MeV, mega-electron volts; c, speed of light in a vacuum). This measurement is in significant tension with the standard model expectation.

Suspected Metallic Embolization Distal to Coiled Intracranial Aneurysms Detectable by Susceptibility-Weighted MR Imaging

BACKGROUND AND PURPOSE

After endovascular coiling of intracranial aneurysms, round dark parenchymal lesions believed to be particulate metal are sometimes encountered in MR imaging studies of the brain. We used SWI to assess the frequency of such occurrences, in addition to exploring likely causes and clinical implications.

MATERIALS AND METHODS

We reviewed 700 MR imaging studies performed between September 2018 and March 2019 at our institution as follow-up monitoring of coiled intracranial aneurysms. Any sizeable (>5 mm) rounded dark-signal lesions encountered were presumed to be metallic. The magnitudes and locations of such lesions were recorded. In patients with these lesions, pertinent procedural documentation was screened for devices used, including coils, microcatheters, microguidewires, and stents. Medical records were also examined to determine whether any related symptoms ensued.

RESULTS

Twenty patients (2.8%) exhibited a total of 25 lesions on SWI. Diameters ranged from 5 to 11 mm (median, 8 mm). All except 2 lesions were located in brain regions downstream from aneurysms, but all lesions occupied vascular territories of vessels used to place guiding catheters. Other than the Synchro 14, which was routinely deployed, no device was regularly used in patients with SWI-detectable lesions; and none of the affected patients developed focal neurologic symptoms as a consequence.

CONCLUSIONS

Although the origins remain unclear, distal embolization of particulate metal distal to coiled cerebral aneurysms is occasionally observed on follow-up MR imaging studies. Such lesions, however, seem to have no apparent clinical impact.

Evolution from Ferromagnetism to Antiferromagnetism in Yb(Rh_{1-x}Co_{x})_{2}Si_{2}

Yb(Rh_{1-x}Co_{x})_{2}Si_{2} is a model system to address two challenging problems in the field of strongly correlated electron systems. The first is the intriguing competition between ferromagnetic (FM) and antiferromagnetic (AFM) order when approaching a magnetic quantum critical point (QCP). The second is the occurrence of magnetic order along a very hard crystalline electric field (CEF) direction, i.e., along the one with the smallest available magnetic moment. Here, we present a detailed study of the evolution of the magnetic order in this system from a FM state with moments along the very hard c direction at x=0.27 towards the yet unknown magnetic state at x=0. We first observe a transition towards an AFM canted state with decreasing x and then to a pure AFM state. This confirms that the QCP in YbRh_{2}Si_{2} is AFM, but the phase diagram is very similar to those observed in some inherently FM systems like NbFe_{2} and CeRuPO, which suggests that the basic underlying instability might be FM. Despite the huge CEF anisotropy the ordered moment retains a component along the c axis also in the AFM state. The huge CEF anisotropy in Yb(Rh_{1-x}Co_{x})_{2}Si_{2} excludes that this hard-axis ordering originates from a competing exchange anisotropy as often proposed for other heavy-fermion systems. Instead, it points to an order-by-disorder based mechanism.

Large-area fabrication of microlens arrays by using self-pinning effects during the thermal reflow process

Generally, the fabrication of curved structures such as microlens arrays has been regarded as an expensive and complicated process. Here, we propose a facile method to form a microlens array with controlled lens curvature by combining residue-free nanoimprint lithography (NIL) with V-shaped molds and the successive thermal reflow procedure of the printed polymeric structures. The V-shaped molds used in this study enable the bottom substrate to be exposed after the NIL process when the initial thickness is controlled. Then, we use the thermal reflow to realize hemi-cylindrical curved lenses by applying heat. The polymers are self-pinned on the exposed substrate, which is strong enough to fix the boundary to not dewet or be flattened in the broad temperature range of the reflow process, which is essential for a large-area fabrication. Furthermore, we demonstrate the modulation of the focal lengths of the lenses by controlling the initial polymer thickness coated on a substrate.

Search for the Exotic Meson X(5568) with the Collider Detector at Fermilab

A search for the exotic meson X(5568) decaying into the B_{s}^{0}π^{±} final state is performed using data corresponding to 9.6  fb^{-1} from pp[over ¯] collisions at sqrt[s]=1960  GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7% at the 95% confidence level is set on the fraction of B_{s}^{0} produced through the X(5568)→B_{s}^{0}π^{±} process.

Combined Forward-Backward Asymmetry Measurements in Top-Antitop Quark Production at the Tevatron

The CDF and D0 experiments at the Fermilab Tevatron have measured the asymmetry between yields of forward- and backward-produced top and antitop quarks based on their rapidity difference and the asymmetry between their decay leptons. These measurements use the full data sets collected in proton-antiproton collisions at a center-of-mass energy of sqrt[s]=1.96  TeV. We report the results of combinations of the inclusive asymmetries and their differential dependencies on relevant kinematic quantities. The combined inclusive asymmetry is A_{FB}^{tt[over ¯]}=0.128±0.025. The combined inclusive and differential asymmetries are consistent with recent standard model predictions.

Tevatron Combination of Single-Top-Quark Cross Sections and Determination of the Magnitude of the Cabibbo-Kobayashi-Maskawa Matrix Element V_{tb}

We present the final combination of CDF and D0 measurements of cross sections for single-top-quark production in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb^{-1} per experiment. The t-channel cross section is measured to be σ_{t}=2.25_{-0.31}^{+0.29} pb. We also present the combinations of the two-dimensional measurements of the s- vs t-channel cross section. In addition, we give the combination of the s+t channel cross section measurement resulting in σ_{s+t}=3.30_{-0.40}^{+0.52} pb, without assuming the standard model value for the ratio σ_{s}/σ_{t}. The resulting value of the magnitude of the top-to-bottom quark coupling is |V_{tb}|=1.02_{-0.05}^{+0.06}, corresponding to |V_{tb}|>0.92 at the 95% C.L.

Search for Resonances Decaying to Top and Bottom Quarks with the CDF Experiment

We report on a search for charged massive resonances decaying to top (t) and bottom (b) quarks in the full data set of proton-antiproton collisions at a center-of-mass energy of √[s]=1.96  TeV collected by the CDF II detector at the Tevatron, corresponding to an integrated luminosity of 9.5  fb(-1). No significant excess above the standard model background prediction is observed. We set 95% Bayesian credibility mass-dependent upper limits on the heavy charged-particle production cross section times branching ratio to tb. Using a standard model extension with a W'→tb and left-right-symmetric couplings as a benchmark model, we constrain the W' mass and couplings in the 300-900  GeV/c(2) range. The limits presented here are the most stringent for a charged resonance with mass in the range 300-600  GeV/c(2) decaying to top and bottom quarks.

Tevatron constraints on models of the Higgs boson with exotic spin and parity using decays to bottom-antibottom quark pairs

Combined constraints from the CDF and D0 Collaborations on models of the Higgs boson with exotic spin J and parity P are presented and compared with results obtained assuming the standard model value JP=0+. Both collaborations analyzed approximately 10  fb(-) of proton-antiproton collisions with a center-of-mass energy of 1.96 TeV collected at the Fermilab Tevatron. Two models predicting exotic Higgs bosons with JP=0- and JP=2+ are tested. The kinematic properties of exotic Higgs boson production in association with a vector boson differ from those predicted for the standard model Higgs boson. Upper limits at the 95% credibility level on the production rates of the exotic Higgs bosons, expressed as fractions of the standard model Higgs boson production rate, are set at 0.36 for both the JP=0- hypothesis and the JP=2+ hypothesis. If the production rate times the branching ratio to a bottom-antibottom pair is the same as that predicted for the standard model Higgs boson, then the exotic bosons are excluded with significances of 5.0 standard deviations and 4.9 standard deviations for the JP=0- and JP=2+ hypotheses, respectively.

Constraints on models of the Higgs boson with exotic spin and parity using decays to bottom-antibottom quarks in the full CDF data set

A search for particles with the same mass and couplings as those of the standard model Higgs boson but different spin and parity quantum numbers is presented. We test two specific alternative Higgs boson hypotheses: a pseudoscalar Higgs boson with spin-parity J^{P}=0^{-} and a gravitonlike Higgs boson with J^{P}=2^{+}, assuming for both a mass of 125  GeV/c^{2}. We search for these exotic states produced in association with a vector boson and decaying into a bottom-antibottom quark pair. The vector boson is reconstructed through its decay into an electron or muon pair, or an electron or muon and a neutrino, or it is inferred from an imbalance in total transverse momentum. We use expected kinematic differences between events containing exotic Higgs bosons and those containing standard model Higgs bosons. The data were collected by the CDF experiment at the Tevatron proton-antiproton collider, operating at a center-of-mass energy of sqrt[s]=1.96  TeV, and correspond to an integrated luminosity of 9.45  fb^{-1}. We exclude deviations from the predictions of the standard model with a Higgs boson of mass 125  GeV/c^{2} at the level of 5 standard deviations, assuming signal strengths for exotic boson production equal to the prediction for the standard model Higgs boson, and set upper limits of approximately 30% relative to the standard model rate on the possible rate of production of each exotic state.

Measurement of the single top quark production cross section and |Vtb| in events with one charged lepton, large missing transverse energy, and jets at CDF

We report a measurement of single top quark production in proton-antiproton collisions at a center-of-mass energy of sqrt[s]=1.96  TeV using a data set corresponding to 7.5  fb(-1) of integrated luminosity collected by the Collider Detector at Fermilab. We select events consistent with the single top quark decay process t→Wb→ℓνb by requiring the presence of an electron or muon, a large imbalance of transverse momentum indicating the presence of a neutrino, and two or three jets including at least one originating from a bottom quark. An artificial neural network is used to discriminate the signal from backgrounds. We measure a single top quark production cross section of 3.04(-0.53)(+0.57)  pb and set a lower limit on the magnitude of the coupling between the top quark and bottom quark |Vtb|>0.78 at the 95% credibility level.

Measurements of direct CP-violating asymmetries in charmless decays of bottom baryons

We report final measurements of direct CP-violating asymmetries in charmless decays of neutral bottom hadrons to pairs of charged hadrons with the upgraded Collider Detector at the Fermilab Tevatron. Using the complete √s=1.96  TeV proton-antiproton collisions data set, corresponding to 9.3  fb⁻¹ of integrated luminosity, we measure A(Λ(b)⁰→pπ⁻)=+0.06±0.07(stat)±0.03(syst) and A(Λ(b)⁰→pK⁻)=-0.10±0.08(stat)±0.04(syst), compatible with no asymmetry. In addition we measure the CP-violating asymmetries in B(s)⁰→K⁻π⁺ and B⁰→K⁺π⁻ decays to be A(B(s)⁰→K⁻π⁺)=+0.22±0.07(stat)±0.02(syst) and A(B⁰→K⁺π⁻)=-0.083±0.013(stat)±0.004(syst), respectively, which are significantly different from zero and consistent with current world averages.

Unusual weak magnetic exchange in two different structure types: YbPt2Sn and YbPt2In

We present the structural, magnetic, thermodynamic and transport properties of the two new compounds YbPt(2)Sn and YbPt(2)In. X-ray powder diffraction shows that they crystallize in different structure types, the hexagonal ZrPt(2)Al and the cubic Heusler type, respectively. Despite quite different lattice types, both compounds present very similar magnetic properties: a stable trivalent Yb(3+), no evidence for a sizeable Kondo interaction and very weak exchange interactions with a strength below 1 K as deduced from specific heat C(T). Broad anomalies in C(T) suggest short range magnetic ordering at about 250 mK and 180 mK for YbPt(2)Sn and YbPt(2)In, respectively. The weak exchange and the low ordering temperature result in a large magnetocaloric effect as deduced from the magnetic field dependence of C(T), making these compounds interesting candidates for magnetic cooling. In addition we found in YbPt(2)In evidences for a charge density wave transition at about 290 K. The occurrence of such transitions within several RET2X compound series (RE = rare earth, T = noble metal, X = In, Sn) is analyzed.

Measurement of the inclusive leptonic asymmetry in top-quark pairs that decay to two charged leptons at CDF

We measure the inclusive forward-backward asymmetry of the charged-lepton pseudorapidities from top-quark pairs produced in proton-antiproton collisions and decaying to final states that contain two charged leptons (electrons or muons). The data are collected with the Collider Detector at Fermilab and correspond to an integrated luminosity of 9.1 fb(-1). We measure the leptonic forward-backward asymmetry, A(FB)(ℓ), to be 0.072 ± 0.060 and the leptonic pair forward-backward asymmetry, A(FB)(ℓℓ), to be 0.076 ± 0.082. The measured values can be compared with the standard model predictions of A(FB)(ℓ) = 0.038 ± 0.003 and A(FB)(ℓℓ) = 0.048 ± 0.004, respectively. Additionally, we combine the A(FB)(ℓ) result with a previous determination from a final state with a single lepton and hadronic jets and obtain A(FB)(ℓ) = 0.090(-0.026)(+0.028).

Evidence for s-channel single-top-quark production in events with one charged lepton and two jets at CDF

We report evidence for s-channel single-top-quark production in proton-antiproton collisions at center-of-mass energy sqrt[s] = 1.96 TeV using a data set that corresponds to an integrated luminosity of 9.4 fb(-1) collected by the Collider Detector at Fermilab. We select events consistent with the s-channel process including two jets and one leptonically decaying W boson. The observed significance is 3.8 standard deviations with respect to the background-only prediction. Assuming a top-quark mass of 172.5 GeV/c(2), we measure the s-channel cross section to be 1.41(-0.42)(+0.44) pb.

Search for s-channel single-top-quark production in events with missing energy plus jets in pp collisions at sqrt[s] = 1.96 TeV

The first search for single-top-quark production from the exchange of an s-channel virtual W boson using events with an imbalance in the total transverse energy, b-tagged jets, and no identified leptons is presented. Assuming the electroweak production of top quarks of mass 172.5 GeV/c(2) in the s channel, a cross section of 1.12(-0.57)(+0.61) (stat+syst) pb with a significance of 1.9 standard deviations is measured. This measurement is combined with the result obtained from events with an imbalance in total transverse momentum, b-tagged jets, and exactly one identified lepton, yielding a cross section of 1.36(-0.32)(+0.37) (stat+syst) pb, with a significance of 4.2 standard deviations.

Observation of s-channel production of single top quarks at the Tevatron

We report the first observation of single-top-quark production in the s channel through the combination of the CDF and D0 measurements of the cross section in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb(-1) per experiment. The measured cross section is σ(s) = 1.29(-0.24)(+0.26) pb. The probability of observing a statistical fluctuation of the background to a cross section of the observed size or larger is 1.8 × 10(-10), corresponding to a significance of 6.3 standard deviations for the presence of an s-channel contribution to the production of single-top quarks.

Measurement of B(t→Wb)/B(t→Wq) in top-quark-pair decays using dilepton events and the full CDF Run II data set

We present a measurement of the ratio of the top-quark branching fractions R=B(t→Wb)/B(t→Wq), where q represents any quark flavor, in events with two charged leptons, imbalance in total transverse energy, and at least two jets. The measurement uses proton-antiproton collision data at center-of-mass energy 1.96 TeV, corresponding to an integrated luminosity of 8.7  fb^{-1} collected with the Collider Detector at Fermilab during Run II of the Tevatron. We measure R to be 0.87±0.07, and extract the magnitude of the top-bottom quark coupling to be |V_{tb}|=0.93±0.04, assuming three generations of quarks. Under these assumptions, a lower limit of |V_{tb}|>0.85(0.87) at 95% (90%) credibility level is set.

First search for exotic Z Boson decays into photons and neutral pions in hadron collisions

A search for forbidden and exotic Z boson decays in the diphoton mass spectrum is presented for the first time in hadron collisions, based on data corresponding to 10.0 fb(-1) of integrated luminosity from proton-antiproton collisions at √s = 1.96 TeV collected by the CDF experiment. No evidence of signal is observed, and 95% credibility level Bayesian upper limits are set on the branching ratios of decays of the Z boson to a photon and neutral pion (which is detected as a photon), a pair of photons, and a pair of neutral pions. The observed branching ratio limits are 2.01 × 10(-5) for Z → π(0)γ, 1.46 × 10(-5) for Z → γγ, and 1.52 × 10(-5) for Z → π(0)π(0). The Z → π(0)γ and Z → γγ limits improve the most stringent results from other experiments by factors of 2.6 and 3.6, respectively. The Z → π(0)π(0) branching ratio limit is the first experimental result on this decay.

Observation of D⁰-D¯⁰ mixing using the CDF II detector

We measure the time dependence of the ratio of decay rates for D0→K(+)π(-) to the Cabibbo-favored decay D(0)→K(-)π(+). The charge conjugate decays are included. A signal of 3.3×10(4) D(*+)→π(+)D(0), D(0)→K(+)π(-) decays is obtained with D0 proper decay times between 0.75 and 10 mean D0 lifetimes. The data were recorded with the CDF II detector at the Fermilab Tevatron and correspond to an integrated luminosity of 9.6  fb(-1) for pp¯ collisions at √s=1.96  TeV. Assuming CP conservation, we search for D0-D¯0 mixing and measure the mixing parameters to be R(D)=(3.51±0.35)×10(-3), y'=(4.3±4.3)×10(-3), and x'2=(0.08±0.18)×10(-3). We report Bayesian probability intervals in the x'2-y' plane and find that the significance of excluding the no-mixing hypothesis is equivalent to 6.1 Gaussian standard deviations, providing the second observation of D0-D¯0 mixing from a single experiment.

Direct measurement of the total decay width of the top quark

We present a measurement of the total decay width of the top quark using events with top-antitop quark pair candidates reconstructed in the final state with one charged lepton and four or more hadronic jets. We use the full Tevatron run II data set of sqrt[s]=1.96  TeV proton-antiproton collisions recorded by the CDF II detector. The top quark mass and the mass of the hadronically decaying W boson are reconstructed for each event and compared with distributions derived from simulated signal and background samples to extract the top quark width (Γtop) and the energy scale of the calorimeter jets with in situ calibration. For a top quark mass Mtop=172.5  GeV/c2, we find 1.10<Γtop<4.05  GeV at 68% confidence level, which is in agreement with the standard model expectation of 1.3 GeV and is the most precise direct measurement of the top quark width to date.

Measurement of the differential cross section dσ/d(cosθ(t)) for Top-Quark Pair Production in pp Collisions at sqrt[s] = 1.96 TeV

We report a measurement of the differential cross section dσ/d(cosθ(t)) for top-quark pair production as a function of the top-quark production angle in proton-antiproton collisions at sqrt[s] = 1.96 TeV. This measurement is performed using data collected with the CDF II detector at the Tevatron, corresponding to an integrated luminosity of 9.4 fb(-1). We employ the Legendre polynomials to characterize the shape of the differential cross section at the parton level. The observed Legendre coefficients are in good agreement with the prediction of the next-to-leading-order standard-model calculation, with the exception of an excess linear-term coefficient a(1) = 0.40 ± 0.12, compared to the standard-model prediction of a(1)=0.15(-0.03)(+0.07).

Nanometallic glasses: size reduction brings ductility, surface state drives its extent

We report tensile experiments on Ni80P20 metallic glass samples fabricated via a templated electroplating process and via focused ion beam milling, which differed only in their surface energy states: Ga-ion-irradiated and as-electroplated. Molecular dynamics simulations on similar Ni80Al20 systems corroborate the experimental results, which suggest that the transition from brittle to ductile behavior is driven by sample size, while the extent of ductility is driven by surface state.