Organoleptic characteristics and compositional profile of meat of growing Japanese quail fed different levels of poultry byproducts compost

The poultry industry generates a lot of waste, including dead birds, manure, and poultry litter. Poultry waste should never be disposed of improperly because it can seriously harm the environment. The waste can be recycled as a feedstock for use in poultry feed by composting the litter and deceased birds. The compositional profile and organoleptic properties of the meat of growing Japanese quail were examined over the course of a 4-week trial to ascertain the effect of adding compost to the diet. In a completely randomized design (CRD), 1200 newly hatched quail chicks (Coturnix coturnix japonica) were divided into five treatment groups (diets with 0, 2.5, 5, 7.5, and 10% compost), each consisting of 40 birds with six replicates. The addition of compost to the diet had no noticeable effects on the organoleptic qualities of appearance, color, aroma, taste, texture, juiciness, tenderness, and acceptability (P>0.05). The compositional profile characteristics for chicks given compost at any level compared to chicks fed the control diet showed no differences (P>0.05). These findings suggest that the sensory characteristics and compositional profile of growing meat quails can be maintained when fed diets including up to 10% compost.

Assessing effect of feeding poultry byproducts compost on organoleptic characteristics and compositional profile of meat of broiler chickens

Large amounts of waste, including dead birds, manure, and poultry litter, are produced by the poultry industry. Poultry waste should be disposed of properly to avoid major pollution and health risks. Composting litter and dead birds could be an option to recycle the waste and use in poultry feed. A study was conducted to investigate the effects of feeding composted poultry waste on the organoleptic qualities and compositional profile of the meat of broiler chickens. A total of 300 day-old broiler chicks (500-Cobb) were randomly allocated to five treatment groups replicated six times with 10 birds each, under a completely randomized design (CRD). Five iso-caloric and iso-nitrogenous diets including composted poultry byproducts at concentrations of 0, 2.5, 5, 7.5, and 10% were fed ad libitum to the birds from day 0 to day 35. The sensory grading and meat composition profile of 500 Cobb broiler chickens were tested at 35 days of age. The findings showed that there were no variations in the sensory profiles of the meat from birds given various diets (P>0.05). Although the results were somewhat lower for the chicks fed compost-containing diets than for the control group, this difference was deemed to be insignificant (P>0.05). Similarly, there were no variations in the compositional profile values of the meat between meat from birds fed various diets (P>0.05). These findings imply that broiler chickens may be raised on diets containing up to 10% poultry byproduct compost without any negative impacts on the meat's sensory quality or composition. Additionally, using compost into broiler diets may help to lower the cost of feed.

Design, synthesis and evaluation of inhibitors of the SARS-CoV-2 nsp3 macrodomain

A series of amino acid based 7H-pyrrolo[2,3-d]pyrimidines were designed and synthesized to discern the structure activity relationships against the SARS-CoV-2 nsp3 macrodomain (Mac1), an ADP-ribosylhydrolase that is critical for coronavirus replication and pathogenesis. Structure activity studies identified compound 15c as a low-micromolar inhibitor of Mac1 in two ADP-ribose binding assays. This compound also demonstrated inhibition in an enzymatic assay of Mac1 and displayed a thermal shift comparable to ADPr in the melting temperature of Mac1 supporting binding to the target protein. A structural model reproducibly predicted a binding mode where the pyrrolo pyrimidine forms a hydrogen bonding network with Asp22 and the amide backbone NH of Ile23 in the adenosine binding pocket and the carboxylate forms hydrogen bonds to the amide backbone of Phe157 and Asp156, part of the oxyanion subsite of Mac1. Compound 15c also demonstrated notable selectivity for coronavirus macrodomains when tested against a panel of ADP-ribose binding proteins. Together, this study identified several low MW, low µM Mac1 inhibitors to use as small molecule chemical probes for this potential anti-viral target and offers starting points for further optimization.

Design, Synthesis and Evaluation of Inhibitors of the SARS-CoV2 nsp3 Macrodomain

A series of amino acid based 7H -pyrrolo[2,3- d ]pyrimidines were designed and synthesized to discern the structure activity relationships against the SARS-CoV-2 nsp3 macrodomain (Mac1), an ADP-ribosylhydrolase that is critical for coronavirus replication and pathogenesis. Structure activity studies identified compound 15c as a low-micromolar inhibitor of Mac1 in two ADP-ribose binding assays. This compound also demonstrated inhibition in an enzymatic assay of Mac1 and displayed a thermal shift comparable to ADPr in the melting temperature of Mac1 supporting binding to the target protein. A structural model reproducibly predicted a binding mode where the pyrrolo pyrimidine forms a hydrogen bonding network with Asp ²² and the amide backbone NH of Ile ²³ in the adenosine binding pocket and the carboxylate forms hydrogen bonds to the amide backbone of Phe ¹⁵⁷ and Asp ¹⁵⁶ , part of the oxyanion subsite of Mac1. Compound 15c also demonstrated notable selectivity for coronavirus macrodomains when tested against a panel of ADP-ribose binding proteins. Together, this study identified several low MW, low μM Mac1 inhibitors to use as small molecule chemical probes for this potential anti-viral target and offers starting points for further optimization.

An unusual presentation of a vesicouterine fistula

A 26-year-old female presented with a history of cyclical incontinence following a ventouse assisted delivery. Initial investigations revealed an endometrial deposit in her bladder, which following further investigations revealed a vesicouterine fistula necessitating formal open repair.

Determination of genetic variation among chickpea genotypes and their F₁ crosses with RAPD markers

The intensity of genetic diversity amongst chickpea genotypes and their crosses is unknown. The current study investigated the genetic diversity of chickpea genotypes and their F₁ crosses by using random amplified polymorphic DNA (RAPD) markers. We assessed the variation among six chickpea genotypes and 15 F₁ crosses with the RAPD markers. The six parents and their 21 hybrids were carefully studied based on the presence or absence of bands. The level of polymorphism varied with different primers. Out 28 primers used, 21 amplified the genomic DNA in all the varieties, 15 generated polymorphic bands among all the varieties, and six produced similar banding patterns.

Effect of inorganic nitrogenous fertilizer on productivity of recently reclaimed saline sodic soils with and without biofertilizer

Saline sodic soils after reclamation become infertile due to leaching of most of the nutrients along with salts from the rooting medium. Microbes can play a vital role in the productivity improvement of such soils. In this study a saline sodic field having EC, 6.5 dS m(-1), pH, 9.1 and gypsum requirement (GR) 3.5 tons acre(-1) was reclaimed by applying gypsum at the rate of 100% GR. Rice and wheat crops were transplanted/sown for three consecutive years. Inorganic nitrogenous fertilizer was used with and without biofertilizers i.e., Biopower (Azospirillum) for rice and diazotroph inoculums for wheat. Nitrogen was applied at the rate of 0, 75% of recommended dose (RD), RD, 125% of RD and 150% of RD. Recommended dose of P without K was applied to all the plots. Biopower significantly improved Paddy and straw yield of rice over inorganic nitrogenous fertilizer. In case of wheat diazotroph inoculum improved grain and straw yield significantly over inorganic nitrogenous fertilizer. Among N fertilizer rates, RD + 25% additional N fertilizer was found to be the best dose for rice and wheat production in recently reclaimed soils. Nitrogen concentration and its uptake by paddy, grain and straw were also increased by biopower and diazotroph inoculum over inorganic nitrogenous fertilizer. Among N fertilizer rates, RD + 25% additional N fertilizer was found to be the best dose for nitrogen concentration and its uptake by paddy, grain and straw. Total soil N, available P and extractable K were increased while salinity/sodicity parameters were decreased with the passage of time. The productivity of the soil was improved more by biofertilizers over inorganic N fertilizers.

Effectiveness of a self-adhesive resin luting system on fracture resistance of teeth restored with dentin-bonded crowns

Laboratory studies have demonstrated satisfactory fracture resistance of all-ceramic crowns placed using a conventional resin-composite luting material and a dentine bonding system. This study investigated the fracture resistance of teeth restored with dentine-bonded ceramic crowns luted with a self-etching luting material. Standardized preparations were carried out on two groups of ten sound, unrestored, maxillary premolar teeth. Ceramic crowns were constructed, their internal surfaces etched and placed using two luting system combinations. Compressive fracture resistance was determined for each group using a Universal Testing Machine. Mean compressive fracture resistance of 890 (222) N and 760 (271) N were recorded for the RelyX Unicem Aplicap and Mirage groups, respectively. There was no significant difference in the mean compressive fracture resistance of the restored teeth in both groups (P<0.05). The failure modes were different for each cements with more severe (Mode V)failures associated with the Mirage group compared with the consistent Mode II failures associated with RelyX Unicem Aplicap. We conclude that the fracture resistance of dentine-bonded crowns luted with a self-adhesive resin-based luting material was no different from that of a conventional resin-based luting system. The fracture resistance of dentine-bonded ceramic crowns may be clinically satisfactory when a self-adhesive resin-based luting material is utilised.

Human microvascular endothelial cellular interaction with atomic N-doped DLC compared with Si-doped DLC thin films

This article reports results of endothelial cell interaction with atom beam source N-doped a-C:H (diamond-like carbon, DLC) as it compares with that of Si-doped DLC thin films. The RF plasma source exhibits up to 40% N-dissociation and N-atomic fluxes of approximately 0.85 x 10(18) atoms/s, which ensures better atomic nitrogen incorporation. Two different types of nitrogen species (with and without the use of sweep plates to remove charged ions) were employed for nitrogen doping. The number of attached endothelial cells is highest on Si-DLC, followed by the N-DLC (where the sweep plates were used to remove ions), the N-DLC (without the use of sweep plates), undoped DLC, and finally the uncoated sample. The contact angle values for these films suggest that water contact angle is higher in the atomic nitrogen neutral films and Si-DLC films compared to the ionized-nitrogen specie doped films and undoped DLC thin films, suggesting that the more hydrophobic films, semiconducting films, and film with relieved stress have better interaction with human microvascular endothelial cells. It seems evident that N-doping increases the Raman I(D)/I(G) ratios, whereas N-neutral doping decreases it slightly and Si-doping decreases it even further. In this study, lower Raman I(D)/I(G) ratios are associated with increased sp(3)/sp(2) ratio, an increased H concentration, photoluminescence intensity, and a higher endothelial cellular adhesion. These investigations could be relevant to biocompatibility assessment of nanostructured biomaterials and tissue engineering.

Macrophage responses to vascular stent coatings

Diamond-like carbon (DLC) films have been proposed as potential coatings for blood-contacting devices. In this study, tetrahedral amorphous carbon (ta-C) films deposited by filtered cathodic vacuum arc system (FCVA) were compared with commercially deposited polyurethane coatings (PU) and uncoated stainless steel samples. X-ray reflectivity (XRR) measurements were performed to check density and thickness of the ta-C coatings, and contact angles measurements were used to assess surface wettability. J774 macrophages were used to assess the cell responses to the materials. Cell number, metabolic activity, and hydrogen peroxide production were measured by using biochemical assays, and the cell attachment and morphology were determined by using scanning electron microscopy and confocal laser scanning microscopy. Wettability measurements showed that of the materials, the stainless steel was the most hydrophilic, and the ta-C coatings were the most hydrophobic. Although the initial attachment and morphology did not appear to be dependent on the wettability, the cell numbers did increase with increasing wettability. Macrophages on the stainless steel samples were the most active in producing hydrogen peroxide. These data show that ta-C samples performed as well as commercial PU-coated samples in blocking cell reactions to the substrate and may prove to be effective coatings for blood-contacting materials.

Cuspal movement and microleakage in premolar teeth restored with a packable composite cured in bulk or in increments

INTRODUCTION

The aim of this study was to investigate the effect of two novel curing systems (a plasma arc light, and a 'turbo-boosted' conventional curing light) on cuspal movement and gingival microleakage of 'packable' resin-based composite (RBC) restorations placed in extracted maxillary premolar teeth.

MATERIALS AND METHODS

Forty sound extracted upper premolar teeth were subjected to standardised preparation of a large mesio-occlusal-distal cavity before restoration with a RBC. Four curing regimens were used. Either the RBC was placed in bulk and light-cured in one increment using (a). the plasma arc light; (b). the 'turbo-boosted' curing light, or the RBC was placed in eight increments using (c). the plasma arc light; (d). the 'turbo-boosted' curing light. A deflection measuring gauge allowed a measurement of cuspal deflection at each stage of polymerisation. Restored teeth were thermocycled before immersion in a 0.2% basic fuchsin dye for 24 h. After sagittal sectioning of the restored teeth in a mesio-distal plane, the sectioned restorations were examined to assess cervical microleakage.

RESULTS

Cuspal deflection measurements were significantly increased when the 'turbo-boosted' halogen curing light was compared with the plasma arc light. Total mean cuspal deflection measurements obtained with incremental cure were significantly increased compared with bulk cure for both light sources. Gingival microleakage for bulk restored teeth was significantly increased compared with teeth restored incrementally. Incremental restoration with the plasma arc light had significantly increased gingival microleakage compared with the 'turbo-boosted' halogen curing light.

CONCLUSIONS

The packable composite tested could not be cured adequately to a depth of 5 mm with the plasma arc light within the specified irradiation time. Under the test conditions of the current investigation, bulk curing only appeared to be practical with the high intensity halogen light (40 s activation). Incremental build-up and polymerisation optimised marginal seal for the high intensity halogen light but led to greater cuspal deflection.

The incidence of carcinoma in cytologically benign thyroid cysts

BACKGROUND

The management of cytologically benign thyroid cysts is controversial. Treatment options include observation, chemical sclerosis, and surgery. This study was undertaken to determine the incidence of carcinoma in cytologically benign thyroid cysts that recur after complete aspiration and to determine the indications for surgery in these patients.

METHODS

The medical records of 1189 consecutive patients undergoing thyroid surgery between July 1995 and November 2000 were reviewed. In 34 patients the indication for surgery was a thyroid cyst with benign cytologic findings that refilled at least once after complete aspiration. These patients were selected for further study.

RESULTS

The 26 women and 8 men had a median age of 42 years. Fine-needle aspiration cytology was consistent with a benign cyst in all these cases. Final pathologic findings revealed the nodule to be a papillary carcinoma in 4 patients (12%). In another 4 patients (12%) an incidental microscopic papillary carcinoma, separate from the cyst, was identified on final pathologic findings. In all 4 patients with papillary carcinoma the cyst size was greater than 3 cm (range, 3.4 to 5.0 cm).

CONCLUSIONS

The incidence of malignancy in cytologically benign thyroid cysts that recur after aspiration is high enough to warrant surgical excision, especially if the cyst is greater than 3 cm in size.

Utility of PCR in diagnosis of problematic cases of typhoid

Typhoid is a global problem. Conventional diagnostic methods have limitations. The Widal test gives a high proportion of false positive results, and indiscriminate use of antibiotics has reduced the utility of blood culture. Consequently, these procedures are inadequate for diagnosing suspected cases of typhoid that do not present clear-cut symptoms. We previously showed that PCR-based diagnosis of typhoid targeting the flagellin gene has unparalleled specificity. We assessed the utility of this method for diagnosis of problematic cases of typhoid. A comparative study of PCR, blood culture, and Widal test was carried out on 55 cases of suspected typhoid with fever for 3-30 days and possessing an ambiguous clinical picture. A control group comprised of 20 healthy persons was also included. The respective positive results by PCR, blood culture, and Widal test for these groups were 58.2 and 0%, 14.5 and 0%, and 52.7 and 45%. Sensitivity of PCR as compared with that of blood culture was significantly better. We concluded that PCR is much superior to conventional methods and, due to its high sensitivity and specificity, can be of great use for rapid and definitive diagnosis of problematic cases of typhoid.

Re-operation for bleeding after thyroidectomy and parathyroidectomy

BACKGROUND

This study was undertaken to determine the frequency and timing of re-operation for bleeding following thyroidectomy (THY) and parathyroidectomy (PARA) as well as the implications of this concerning the safety of ambulatory surgery.

METHODS

Patients requiring re-operation after THY and PARA were identified from a computerized database of patients undergoing surgery between 3/l/95 and 12/31/99. The medical records of these patients were reviewed in detail.

RESULTS

Six of 918 THY (0.7%) and 4 of 350 PARA (1.1%) required re-operation for bleeding. In two cases the wounds were opened emergently at the bedside due to worsening airway obstruction. One patient required an emergency tracheostomy. There were no deaths. Excluding one patient who bled five days post-operatively, the time interval from the completion of surgery to the identification of postoperative hematoma ranged from 2 to 48 hours, the median being 16 hours.

CONCLUSIONS

Postoperative bleeding is an uncommon but unavoidable complication of THY and PARA. If treated promptly, serious consequences can be avoided. The relatively long interval between the initial operation and the development of the hematoma needs to be considered when recommending the performance of these procedures on an ambulatory basis.

Repair of chronic tympanic membrane perforations with long-term epidermal growth factor

Chronic tympanic membrane (TM) perforation is a common problem worldwide. Recent reports have shown epidermal growth factor (EGF) to stimulate healing in approximately 80% of chronic TM perforations in chinchillas when applied in three doses over 1 week. The objective of this controlled study is to evaluate the efficacy of long-term EGF in the closure of TM perforations. Chronic chinchilla TM perforations were treated with EGF for up to 6 weeks. One hundred percent (17 of 17) of treatment group perforations completely healed. However, two new findings with this long dosing scheme were reperforation on long-term follow-up and three TMs with cholesteatomas. It is likely that reperforation was due to a progressive thinning seen with prolonged EGF application. Long-term EGF use is not recommended for the treatment of TM perforations because of possible wound healing impairment and possible cholesteatoma induction.