Microwaved-Assisted Synthesis of Starch-Based Biopolymer Membranes for Novel Green Electrochemical Energy Storage Devices

The investigated starch biopolymer membrane was found to be a sustainable alternative to currently reported and used separators due to its properties, which were evaluated using physicochemical characterization. The molecular dynamics of the biomembrane were analyzed using low-field nuclear magnetic resonance (LF NMR) as well as Raman and infrared spectroscopy, which proved that the chemical composition of the obtained membrane did not degrade during microwave-assisted polymerization. Easily and cheaply prepared through microwave-assisted polymerization, the starch membrane was successfully used as a biodegradable membrane separating the positive and negative electrodes in electric double-layer capacitors (EDLCs). The obtained results for the electrochemical characterization via cyclic voltammetry (CV), galvanostatic charge with potential limitation (GCPL), and electrochemical impedance spectroscopy (EIS) show a capacitance of 30 F g-1 and a resistance of 2 Ohms; moreover, the longevity of the EDLC during electrochemical floating exceeded more than 200 h or a cyclic ability of 50,000 cycles. Furthermore, due to the flexibility of the membrane, it can be easily used in novel, flexible energy storage systems. This proves that this novel biomembrane can be a significant step toward ecologically friendly energy storage devices and could be considered a cheaper alternative to currently used materials, which cannot easily biodegrade over time in comparison to biopolymers.

Chemical Characteristics and Thermal Oxidative Stability of Novel Cold-Pressed Oil Blends: GC, LF NMR, and DSC Studies

Plant oils contain a high content of unsaturated fatty acids. Studies of food products have revealed a considerable disproportion in the ratio of ω6 to ω3. This article presents information on the healthful qualities of eight new oil blends that contain a beneficial proportion of ω6 to ω3 fatty acids (5:1), as well as their degradation during heating at 170 and 200 °C. The fatty acid profile was analyzed by gas chromatography (GC), content of polar compounds and polymers of triacylglycerols by liquid chromatography (LC), water content was measured by the Karl Fischer method, and oxidative stability was measured by differential scanning calorimetry (DSC) and low-field nuclear magnetic resonance (LF NMR) methods. The results showed that during heating, the polar fraction content increased in samples heated at both analyzed temperatures compared to unheated oils. This was mainly due to the polymerization of triacylglycerols forming dimers. In some samples that were heated, particularly those heated to 200 °C, trimers were detected, however, even with the changes that were observed, the polar fraction content of the blends did not go beyond the limit. Despite the high content of unsaturated fatty acids, the analyzed blends of oils are characterized by high oxidative stability, confirmed by thermoanalytical and nuclear magnetic resonance methods. The high nutritional value as well as the oxidative stability of the developed oil blends allow them to be used in the production of food, in particular products that ensure an adequate supply of ω3 fatty acids.

Effect of Flaxseed Oil Cake Extract on the Microbial Quality, Texture and Shelf Life of Gluten-Free Bread

Extending the shelf life of gluten-free bread (GFB) is a challenge. Mainly due to the ingredients used and their characteristics, GFB has numerous drawbacks such as unsatisfactory texture and rapid staling beyond a low nutritional value. In the present study, flaxseed oil cake extract (FOCE) was used to replace water (25-100%) in GFB formulations in order to test FOCE's potential to reduce GFB staling and extend microbial stability. Texture (TPA test), water activity (LF NMR), acidity (pH measurements) and microbiological quality of GFBs were tested. Moreover, the content of a lignan with broad health-promoting potential, secoisolariciresinol diglucoside (SDG), in GFB with FOCE was analyzed. The results showed that the use of FOCE enriched experimental GFB in valuable SDG (217-525 µg/100 g DM) while not causing adverse microbiological changes. A moderate level (25-50%) of FOCE did not change the main texture parameters of GFB stored for 72 h, the quality of which was comparable to control bread without FOCE. Meanwhile, higher proportions of FOCE (75-100% of water replacement) shortened GFB shelf life as determined by water activity and texture profile, suggesting that GFB with FOCE should be consumed fresh. To summarize, FOCE at moderate levels can add value to GFBs without causing a drop in quality, while still fitting in with the idea of zero waste and the circular economy.

Chemical Modifications of Normal and Waxy Potato Starches Affect Functional Properties of Aerogels

Aerogels are of increasing interest because of their exceptionally large surface area, porous structure, and low weight. Despite the significant increase in interest in the subject of starch-based aerogels, the number of detailed studies is rather scarce, which is especially evident in the case of chemically modified derivatives. Therefore, the study aims to evaluate the physicochemical properties of aerogels from chemically modified potato starch preparations (E 1422 and E 1450) obtained both from normal and waxy starches. Aerogels were prepared through the retrogradation of starch pastes followed by the gradual replacement of water with ethyl alcohol. The obtained preparations were characterized in terms of their bulk density, oil-binding capacity, as well as the texture and rheological properties of the formed pastes. Moreover, their usefulness was evaluated in an emulsion system employing rheological and low-field NMR methods. The obtained aerogels were characterized by a lower bulk density of 0.18-0.59 g/cm³ and 5.4-6.6 times higher oil-binding capacity compared to native potato starch. The chemical modification of starch helped to further alter the functional properties of the obtained aerogels, making them more effective oil binders, emulsifiers, and stabilizers (increasing the stability from 55 to 90%), which was especially evident for E 1450 preparation. Amylose content improved the aerogel properties, as waxy preparations were characterized by worse functional properties with the only exception of improved thickening ability. The most beneficial properties for the preparation of emulsions were observed for the aerogel obtained based on E 1450 normal potato starch.

The Effect of Packaging Methods, Storage Time and the Fortification of Poultry Sausages with Fish Oil and Microencapsulated Fish Oil on Their Rheological and Water-Binding Properties

The aim of the study was to investigate how liquid fish oil and microencapsulated oil additives influenced the rheological characteristics and the dynamics of water binding in vacuum-packed (VP) and modified-atmosphere-packed (MAP) poultry sausages during 21-day storage. In contrast to the control sample, the sausages enriched with microencapsulated fish oil (MC) were characterised by the greatest ability to accumulate deformation energy. The elastic properties of all sausage variants increased significantly in the subsequent storage periods, whereas the dynamic viscosity of the samples tended to decrease. This phenomenon was confirmed by the gradual reduction of water activity (Aw) in all sausages in the subsequent storage periods. The packaging method influenced the dynamics of water binding in an oil-additive-form-dependent manner. During the storage of the VP and MAP sausages, in samples with the fish oil additive the T1 value tended to increase while the Aw decreased. The T1 value in the MAP MC sample was similar. The FO additive resulted in greater mobility of both proton fractions in the MAP samples than in the VP samples. There were inverse relationships observed in the MC samples. The NMR tests showed that the VP samples with the MC additive were slightly better quality than the other samples.

Polymer-Solvent Interactions in Modified Starches Pastes-Electrokinetic, Dynamic Light Scattering, Rheological and Low Field Nuclear Magnetic Resonance Approach

Starch paste is a very complex dispersion that cannot be clearly classified as a solution, colloid or suspension and many factors affects its properties. As these ambiguities constitute a barrier to technological development, the aim of this study was to investigate the interaction of starch macromolecules with water by analysing the results of rheological properties, low field nuclear magnetic resonance (LF NMR), dynamic light scattering (DLS) and ζ potential analyses. Starch pastes with a concentration of 1%, prepared with distilled water and buffered to pH values of 2.5, 7.0 and 9.5 were analysed. It was proved that the pH buffering substantially decreased the values of consistency index but the pH value itself was not significant. LF NMR studies indicated that the dissolution of starch in water resulted in a reduction in spin-lattice as well as spin-spin relaxation times. Moreover, changes in relaxation times followed the patterns observed in rheological studies. Electrokinetic and DLS analyses showed that potential values are primarily influenced by the properties of the starches themselves and, to a lesser extent, by the environmental conditions. The conducted research also showed complementarity and, to some extent, substitutability of the applied research methods as well as exclusion chromatography (a method not used in this work).

The Process of Pasting and Gelling Modified Potato Starch with LF-NMR

Currently, society expects convenience food, which is healthy, safe, and easy to prepare and eat in all conditions. On account of the increasing popularity of modified potato starch in food industry and its increasing scope of use, this study focused on improving the physical modification of native starch with temperature changes. As a result, it was found that the suggested method of starch modification with the use of microwave power of 150 W/h had an impact on the change in starch granules. The LF-NMR method determined the whole range of temperatures in which the creation of a starch polymer network occurs. Therefore, the applied LF-NMR technique is a highly promising, noninvasive physical method, which allows obtaining a better-quality structure of potato starch gels.

Water Behavior of Aerogels Obtained from Chemically Modified Potato Starches during Hydration

Aerogels are highly porous materials that are prepared by removing water held within a hydrogel in a manner that maintains the three-dimensional structure of the gel. Recently, there has been much interest in the preparation of aerogels from biopolymers, including starch. The applicability of native starches in the food industry is partially limited; therefore, the functional properties of starch are often improved by means of physical and/or chemical modification. The aim of the work was the analysis of molecular dynamics and the transport of water in aerogels obtained from native and chemically modified potato starches of the normal and waxy variety. Chemical modification with OSA (E 1450) as well as cross-linking with adipic anhydrite and acetylation (E 1422) had no significant impact on the hydration of potato starch aerogels as well as equilibrium water activity. The introduction of chemical moieties into starch macromolecules led to the improved binding of water by the biopolymer matrix; this was especially evident in the case of waxy starch derivatives. A increase in the amylopectin-to-amylose ratio of starch used for production of aerogels resulted in a decrease of equilibrium water activity along with spin-lattice relaxation time.

Whey Proteins as a Potential Co-Surfactant with Aesculus hippocastanum L. as a Stabilizer in Nanoemulsions Derived from Hempseed Oil

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box-Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.

Low-Field NMR Study of Shortcake Biscuits with Cricket Powder, and Their Nutritional and Physical Characteristics

The growing human population renders challenges for the future supply of food products with high nutritional value. Here, we enhanced the functional and nutritional value of biscuits, a popular sweet snack, by replacing the wheat flour with 2%, 6%, or 10% (w/w) cricket powder. Consumer acceptance ratings for reference and 2% augmented cookies were comparable, whereas the higher levels of enhancement received inferior consumer scores. This relatively small change in biscuit recipe provided significant and nutritionally desirable enhancements in the biscuits, observed in a series of analyses. An increase in the protein content was observed, including essential amino acids, as well as minerals and fat. This conversion also affected the physical properties of the biscuits, including hardness, and water molecular dynamics measured by 1H NMR. Cricket powder-augmented biscuits join the line of enhanced, functionally superior food products. This and similar food augmentation provide a viable scenario to meet the human food demands in the future.

Multidisciplinary Studies of Folk Medicine "Five Thieves' Oil" (Olejek Pięciu Złodziei) Components

To meet the growing interest in natural antibacterial agents, we evaluated the physicochemical and biological properties of the folk medicine known as “five thieves’ oil” (Polish name: olejek pięciu złodziei). Five thieves’ oil consists of a mixture of five oils: rosemary, lemon, clove, eucalyptus, and cinnamon. In this study, we performed gas chromatography, FTIR, and UV–vis spectroscopic analysis, as well as L-a-b color tests, contact angle determination, and surface tension determination. To verify its antibacterial activity, the metabolic activity and changes in cell membrane permeability of bacteria of the genus Pseudomonas were studied. As a result, it was found that among the constituent oils, the oils of clove and cinnamon were the least volatile and, at the same time, had the strongest antibacterial activity. However, a mix of all the oils also showed comparable activity, which was even more pronounced for the oils after 4 weeks of aging. This effect can be linked to the high content of terpene derivatives such as eugenol and cinnamaldehyde, which can cause changes in bacterial membrane permeability, affecting cell activity and survival. This study is the first to characterize the constituents of the popular folk medicine five thieves’ oil, confirming and explaining its strong antibacterial activity, thus constituting a significant contribution to contemporary health education.

LF NMR spectroscopy analysis of water dynamics and texture of Gluten-Free bread with cricket powder during storage

The paper presents the effect of replacing starch (at 2%, 6% and 10%) with cricket powder (CP) on the water behavior studied by the ¹H NMR method, as well as the texture of gluten-free bread during 6-day storage. It was noticed that the bread crumb containing CP has lower water transport rate than the control bread crumb, while concluding that 2% CP stabilizes water transport throughout the entire staling time range. The NMR analyzes showed that the initial T₂₁ values are the higher, the more starch has been replaced with the CP, however, after 6 days of storage, all tested samples are characterized by similar values of the T₂₁ parameter. A decrease in long component of spin-spin relaxation time T₂₂ during storage was also observed. It has been noted that the replacement of starch to 2% and 6% CP causes an increase in the molecular dynamics of water. The less starch present, the greater the potential for bulk molecules to move. The observed changes at the molecular level resulted in macroscopic changes in the texture of the bread. After analyzing the hardness parameter of the tested breads, it was found that on the day of baking, bread without the addition of CP had significantly higher values of this parameter than breads with CP. For the sample without CP, the highest increase in total hardness change (123.93%) was noted during storage, which indicates the fastest texture change process. Based on the results obtained, it can be concluded that the use of cricket powder to enrich gluten-free bread can not only improve the nutritional value, but also effectively delay the process of bread staling.

Wheat bread enriched with raspberry and strawberry oilcakes: effects on proximate composition, texture and water properties

Oilcakes from the oilseed industry are rich in dietary fibre and protein by-products. We assessed the impact of wheat flour replacement with raspberry and strawberry oilcakes on the proximate composition of bread, colour, texture and water behaviour. The substitution influenced the ash, fat and protein content causing an increase in the content of each of the analysed macronutrients. The crumb colour components (CIE L*a*b*) were shifted toward red while the saturation of yellow decreased. Texture analysis showed that the hardness and chewiness of crumb with oilcakes increased as well as springiness decreased. It was found that flour substitution with oilcakes limited significantly water transport and also influenced the molecular dynamics of water in the bread crumb. 1H NMR measurement results of relaxation times demonstrated that the free water in relation to the bound water in the examined systems depended on the amount of the flour replaced by the oilcake, as well as on the botanical origin of the oilcakes.

Gluten-Free Bread with Cricket Powder-Mechanical Properties and Molecular Water Dynamics in Dough and Ready Product

Published data indicate that cricket powder (CP) is a good source of not only protein, fat and fiber, but also minerals. Due to the fact that this product naturally does not contain gluten, it is an interesting addition to the enrichment of gluten-free foods. This paper is a report on the results of starch substitution with CP (at 2%, 6% and 10%) on the properties of dough and bread. The rheology of dough and the texture of the final product were studied. While the changes caused in the dough by the introduction of CP were not pronounced, the bread obtained from it was characterized by significantly increased hardness and improved consistency. Analyses of water behavior at the molecular level with the use of 1H Nuclear Magnetic Resonance (NMR) indicated that CP altered both the bound and bulk water fractions. Moreover, examination of water activity revealed a decreased rate of water transport in samples of bread that contained CP. These results indicate improved availability of water to the biopolymers of bread, which likely plays a role in shaping the textural properties of the product.

Kinetic models of quality parameters of spreadable processed Gouda cheese during storage

The aim of the study was to prepare mathematical models based on the Arrhenius equation as predictive tools for the assessment of changes in quality parameters during the storage of spreadable Gouda cheese at temperatures of 8, 20 and 30 °C. The activation energy value and the chemical reaction rate constant enabled the construction of kinetic models, which helped to estimate the direction and rate of changes. Moreover, the activation energy (E_a) of the quality parameters was used to determine the sequence of their vulnerability during storage. The value of activation energy corresponding to temperature changes resulted in the following order of susceptibility of the quality parameters: ΔC > ΔE ≈ water activity > texture parameters > pH > colour > sensory parameters > rheological parameters. The research showed limited applicability of the mathematical models for estimation of quality parameters referring to spreadable processed Gouda cheese.

The hydration of proteins in solutions by self-diffusion coefficients. NMR study

The hydration of the globular (lysozyme, albumin) and fibrillar (fibrinogen) proteins in solution has been determined from the measurements of the self-diffusion coefficient by NMR pulsed gradient method. It has been concluded that the concentration dependencies of the self-diffusion coefficient of water molecules in protein solution are controlled by two additive factors: obstruction effect correlated with the protein dimension and direct hydration effect proportional to the number of the adsorption sites on the protein surface.