Vibration reduction of human body biodynamic response in sitting posture under vibration environment by seat backrest support

Four-degree-of-freedom (4-DOF) human-chair coupling models are constructed to characterize the different contact modes between the head, chest back, waist back and backrest. The seat-to-head transfer ratio (STHT) is used as an evaluation metric for vibration reduction effectiveness. The simulated vibration reduction ratio of the model is close to the experimental results, which proves the validity of the model. The peak STHT is obviously reduced (P < 0.05, T-test) with seat-backrest support. The experiments show that supporting the head ( a 1 , P < 0.05, Wilcoxon matched-pairs signed ranks) has the best vibration reduction effect (21%), supporting the chest back ( a 2 , P < 0.05) has a reduced effect (11%), and supporting the waist back ( a 3 , P < 0.05) has the weakest effect (4%). When the upper torso is in full contact with the backrest, the peak STHT curve and resonance frequency are positively correlated with the contact stiffness of the seat surface and negatively correlated with the contact damping. In order to reduce the seat-to-head transfer ratio, the lowest STHT peak and lowest total energy judgments were proposed as the selection methods for the selection of the contact stiffness and damping of the backrest in two environments (periodic and non-periodic excitation), respectively.

Analysis of Output Performance of a Novel Symmetrical T-Shaped Trapezoidal Micro Piezoelectric Energy Harvester Using a PZT-5H

In recent years, low-power wireless sensors with high flexibility, portability and computing capability have been extensively applied in areas such as military, medicine and mechanical equipment condition monitoring. In this paper, a novel symmetrical T-shaped trapezoidal micro piezoelectric energy harvester (STTM-PEH) is proposed to supply energy for wireless sensors monitoring the vibrations of mechanical equipment. Firstly, the finite element model (FEM) of the STTM-PEH is established. Secondly, the modal analysis of the T-shaped trapezoidal piezoelectric cantilever beam is carried out by finite element software and its vibration modes are obtained. Additionally, the structural characteristics of the STTM-PEH and the composition of piezoelectric patches are described. Furthermore, the effects of resistance, acceleration coefficient, substrate materials and structural parameters of the output performance of the STTM-PEH are researched. The results indicate that the output power of the STTM-PEH rises first and then falls with a change in resistance, while the output voltage does not increase as resistance increases to a certain extent. Meanwhile, selecting copper as the piezoelectric material of the T-shaped trapezoidal piezoelectric cantilever beam can generate a higher energy output. Finally, how the structural parameters, including piezoelectric patch thickness, substrate thickness and cantilever head length, affect the output performance of the STTM-PEH is studied, which illustrates that the load range of the STTM-PEH can be appropriately broadened by adjusting the length of the cantilever beam head. This research is valuable for designing a novel high performance piezoelectric energy harvester.

Design and Test of a Spoke-like Piezoelectric Energy Harvester

With the development of industry IoT, microprocessors and sensors are widely used for autonomously transferring information to cyber-physics systems. Massive quantities and huge power consumption of the devices result in a severe increment of the chemical batteries, which is highly associated with problems, including environmental pollution, waste of human/financial resources, difficulty in replacement, etc. Driven by this issue, mechanical energy harvesting technology has been widely studied in the last few years as a great potential solution for battery substitution. Therefore, the piezoelectric generator is characterized as an efficient transformer from ambient vibration into electricity. In this paper, a spoke-like piezoelectric energy harvester is designed and fabricated with detailed introductions on the structure, materials, and fabrication. Focusing on improving the output efficiency and broadening the pulse width, on the one hand, the energy harvesting circuit is optimized by adding voltage monitoring and regulator modules. On the other hand, magnetic mass is adopted to employ the magnetic field of repulsive and upper repulsion–lower attraction mode. The spoke-like piezoelectric energy harvester suggests broadening the frequency domain and increasing the output performance, which is prepared for wireless sensors and portable electronics in remote areas and harsh environments.

A Motion Capturing and Energy Harvesting Hybridized Lower-Limb System for Rehabilitation and Sports Applications

Lower-limb motion monitoring is highly desired in various application scenarios ranging from rehabilitation to sports training. However, there still lacks a cost-effective, energy-saving, and computational complexity-reducing solution for this specific demand. Here, a motion capturing and energy harvesting hybridized lower-limb (MC-EH-HL) system with 3D printing is demonstrated. It enables low-frequency biomechanical energy harvesting with a sliding block-rail piezoelectric generator (S-PEG) and lower-limb motion sensing with a ratchet-based triboelectric nanogenerator (R-TENG). A unique S-PEG is proposed with particularly designed mechanical structures to convert lower-limb 3D motion into 1D linear sliding on the rail. On the one hand, high output power is achieved with the S-PEG working at a very low frequency, which realizes self-sustainable systems for wireless sensing under the Internet of Things framework. On the other hand, the R-TENG gives rise to digitalized triboelectric output, matching the rotation angles to the pulse numbers. Additional physical parameters can be estimated to enrich the sensory dimension. Accordingly, demonstrative rehabilitation, human-machine interfacing in virtual reality, and sports monitoring are presented. This developed hybridized system exhibits an economic and energy-efficient solution to support the need for lower-limb motion tracking in various scenarios, paving the way for self-sustainable multidimensional motion tracking systems in near future.

Piezoelectric Performance of a Symmetrical Ring-Shaped Piezoelectric Energy Harvester Using PZT-5H under a Temperature Gradient

With the rapid development of microelectronics technology, low-power electronic sensors have been widely applied in many fields, such as Internet of Things, aerospace, and so on. In this paper, a symmetrical ring-shaped piezoelectric energy harvester (SR-PEH) is designed to provide energy for the sensor to detect the ambient temperature. The finite element method is used by utilizing software COMSOL 5.4, and the electromechanical coupling model of the piezoelectric cantilever is established. The output performance equations are proposed; the microelectromechanical system (MEMS) integration process of the SR-PEH, circuit, and sensor is stated; and the changing trend of the output power density is explained from an energy perspective. In the logarithmic coordinate system, the results indicate that the output voltage and output power are approximately linear with the temperature when the resistance is constant. In addition, the growth rate of the output voltage and output power decreases with an increase of resistance under the condition of constant temperature. In addition, with an increase of temperature, the growth rate of the output power is faster than that of the output voltage. Furthermore, resistance has a more dramatic effect on the output voltage, whereas temperature has a more significant effect on the output power. More importantly, the comparison with the conventional cantilever-shaped piezoelectric energy harvester (CC-PEH) shows that the SR-PEH can improve the output performance and broaden the frequency band.

Morphological analysis and quantitative evaluation of myopic maculopathy by three-dimensional magnetic resonance imaging

PurposeTo study the characteristic morphology and quantitatively evaluate the eye shape in different types of myopic maculopathy.MethodsA total of 103 eyes from 65 patients with high myopic maculopathy were examined by spectral-domain optical coherence tomography (SD-OCT) and three-dimensional magnetic resonance imaging (3D MRI). The participants were classified into two groups, namely myopic traction maculopathy (MTM) eyes and non-MTM eyes, with SD-OCT imaging. Volume renderings and morphology analysis of the 3D MRI of the eyeball were obtained. Quantitative analysis was achieved in the calculation of vitreous volume and the three-dimensional diameters of the eyeball in three cardinal axes. The eye shape distribution and the diameters of the eyeball were compared between the two groups. Eye shape distribution, vitreous volume, and eyeball diameter were compared between MTM and non-MTM eyes.ResultsThe MTM and non-MTM groups had a total of 68 and 35 eyes, respectively. A significant difference was found in the eye shape distribution (P<0.0001) between MTM and non-MTM eyes. Most of the MTM eyes had undergone a non-uniform expansion of the eyeball, whereas the non-MTM eyes had expanded uniformly. There was no significant difference (P>0.05) in either vitreous volume or other diameters between the two groups.ConclusionsNon-uniform globe expansion and staphyloma formation might play an important role in the pathogenesis of MTM.

Molecular characterization and association analysis of FBXO40 with partial hematological indexes in pig

F-box proteins are quite significant ubiquitin-proteasome pathway regulators in eukaryotic cells. FBXO40, a member of this large family, alters its expression pattern in muscle atrophy. Here we isolated most of the verified porcine FBXO40 coding sequence (CDS) (2258 bp) and assigned it to the porcine chromosome 13q4.1-4.6 by using the INRA-Minnesota porcine radiation hybrid panel, and we also explored the tissue expression distributions, which is relatively high in longissimus dorsi muscle, heart, low in kidney, small intestine, brain, hypophysis, lymphonode, thymus, spleen, large intestine, ovary, stomach, and undetectable in testis, liver, uterus and thyroid gland. Inferring phylogenetic tree was constructed to study the evolutionary implications. Moreover, a HindII (HincII)-RFLP (A/C) polymorphism in 3'-untranslated region (3'-UTR) of porcine FBXO40 gene was demonstrated by sequencing and PCR-restriction fragment length polymorphism (PCR-RFLP) analysis. Statistical analysis result of this polymorphism showed that the allele A was predominant in all detected indigenous breeds, but C in western introduced commercial breeds. The SNP was further analyzed in our experimental pig population including Tongcheng, Landrace, Large White, and crossbreds of Large White × (Landrace × Tongcheng) and Landrace × (Large White × Tongcheng). The association analysis results indicated that the A/C base substitution was associate with some hematological indexes, the hemoglobin concentration (P < 0.0001), mean corpuscular volume hemoglobin concentration (P = 0.0002) and mean corpuscular volume (P = 0.0138).

The chromosomal localization, expression pattern and polymorphism analysis of porcine FSCN1 gene differently expressed from LongSAGE library

Fascin homologue 1 (FSCN1) has established roles in cell adhesion, motility, and cell-cell interactions. Our LongSAGE analysis suggested that FSCN1 was potentially differentially expressed in prenatal pig skeletal muscle. We have cloned the genomic DNA and mRNA sequence of FSCN1 gene and mapped it to SSC3p16-p17. The FSCN1 gene was differently expressed during prenatal skeletal muscle development and exhibited different expression pattern between Tongcheng and Landrace pigs. In Tongcheng pigs, FSCN1 expression was similar at 33 and 65 days post conception (dpc), and then sharply increased to a peak at 90 dpc. In Landrace pigs, however, expression increased between 33 and 65 dpc, peaked at 65 dpc, and was down-regulated thereafter. Significantly different expression levels between Tongcheng and Landrace were observed at 65 and 90 dpc. In postnatal pigs, it was strongly expressed only in the brain, but weakly in skeletal muscle and other tissues. We initially identified 32 SNPs through genomic DNA of FSCN1 gene. Association analysis suggested that the 6840(C/T) mutation was significantly associated with the age at market weight (AGE) (p = 0.0004), average day gain from birth to market (ADG1) (p = 0.0002), and average day gain at testing period (ADG2) (p < 0.0001). Our study suggested that FSCN1 gene plays an in prenatal skeletal muscle development and was a candidate gene for meat production trait.

Role of peripheral hyperpolarization-activated cyclic nucleotide-modulated channel pacemaker channels in acute and chronic pain models in the rat

Hyperpolarization-activated, cyclic nucleotide-modulated (HCN) channels contribute to rhythmic spontaneous activity in the heart and CNS. Ectopic spontaneous neuronal activity has been implicated in the development and maintenance of acute and chronic hyperalgesia, allodynia and spontaneous pain. Previously, we documented that systemic administration of ZD7288, a specific blocker of pacemaker current (I(h)), decreased ectopic activity in dorsal root ganglion (DRG) and reversed tactile allodynia in spinal nerve ligated (SNL) rats [Chaplan SR, Guo HQ, Lee DH, Luo L, Liu C, Kuei C, Velumian AA, Butler MP, Brown SM, Dubin AE (2003) Neuronal hyperpolarization-activated pacemaker channels drive neuropathic pain. J Neurosci 23:1169-1178]. Spontaneous pain is the chief clinical manifestation of peripheral nerve injury; however, a role for I(h) in spontaneous pain has not been described. Here, in further rat studies, we report that systemic administration of ZD7288 reversed spontaneous pain induced by mild thermal injury (MTI) and tactile allodynia induced by SNL and MTI. In contrast, ZD7288 did not reduce thermal hyperalgesia. An important locus of action appears to be in the skin since intraplantar (local) administration of ZD7288 completely suppressed tactile allodynia arising from MTI and SNL and reduced spontaneous pain due to MTI. Immunohistochemical staining of plantar skin sections detected HCN1-HCN4 expression in mechanosensory structures (e.g., Meissner's corpuscles and Merkel cells). Collectively, these data suggest that expression and modulation of I(h) in the peripheral nervous system, including specialized sensory structures, may play a significant role in sensory processing and contribute to spontaneous pain and tactile allodynia.

Delayed platelet dysfunction in prolonged induced canine hypothermia

Mild to moderate hypothermia (33-32 degrees C) is recognized as beneficial for brain protection after brain trauma. However, there are few experimental reports on hemostatic changes during prolonged hypothermia. We compared hemostatic changes during 72 h of mild to moderate hypothermia with data in normothermic dogs.

METHOD

Mongolian dogs in a hypothermic group (N=7, 33 degrees C core temperature) and normothermic group (N=6, 37.5 degrees C core temperature) were anesthetized and instrumented to control temperatures and record hemodynamic changes continuously. Hypothermia or normothermia was maintained for 72 h. Platelet count, platelet aggregation, and thromboelastograms (TEG) were measured in each group.

RESULTS

Heart rate, blood pressure, pulmonary pressure and blood gas were not significantly different between the two groups. Platelet counts, compared to baseline values, were significantly decreased in both groups (P<0.01). Platelet aggregation was significantly decreased in the hypothermic group after 24 h (P<0.04).

CONCLUSION

Long-term hypothermia induced platelet dysfunction, leading to decreased platelet aggregation and prolonged coagulation time (R and K times of TEG).

Experimental evaluation of the V-point heparin-bonding system applied to a dense-membrane artificial lung during 24-hour extracorporeal circulation in beagles

Heparin was covalently bonded to a hollow-fiber dense-membrane artificial lung and circuit using a silane coupling agent and polyethyleneimine as a spacer. This study investigated whether the novel artificial lung could sustain prolonged extracorporeal lung assist (ECLA) by venoarterial bypass in beagles using minimal anticoagulants. We maintained ECLA for 24 h in 3 groups of minimal systemic heparinization, heparinization with the new anticoagulant nafamostat mesilate, and without any systemic anticoagulant. The results were assessed from the functional performance of the artificial lung and by macroscopic and microscopic examination after the experiments. Artificial lung function, hemodynamics, hemogram, and platelet aggregation activity were well maintained in all groups. There was no plasma leakage from the artificial lung. Although several clots were observed in stagnant areas of the artificial lungs and circuits, there was no clot formation inside the artificial lung in any group. This highly biocompatible, heparin-bonded dense-membrane artificial lung performed well and safely during prolonged ECLA with blood clotting times less than 120 s.

[Production of transgenic lamb integrated with modified human anti-trypsin gene]

This experiment is to produce the human mAAT(modified anti-trypsin) which cures the emphysema specifically through mammalian galactophore of transgenic goat. 56 goats were selected as donor for superovulation by FSF + LH microinjection in this experiment. The pronucleic embryos were injected with human mAAT gene after fertilization in vivo, and transferred to the donors or receptors directly. The superovulation was better in March and May than in December with the number of ovulation of 19.50, 21.70 and 16.06, and number of fertilized embryos of 4.31, 6.48 and 3.57 per-animal respectively. The pregnant rates were 18.18% and 25% respectively after transferred to donors and receptors with natural estrus. The donors also can be used as the embryo receptor with no remarkable decrease of pregnant rate. 29 lamb were labored. 4 positive transgenic lamb were checked by PCR, PCR-Southern and Southern analysis. The integrated efficiency of foreign DNA was 13.79% with microinjection of high copy number of foreign DNA fragment.

Long-term mild hypothermia with extracorporeal lung and heart assist improves survival from prolonged cardiac arrest in dogs

BACKGROUND AND PURPOSE

although normothermic extracorporeal lung and heart assist (ECLHA) improves cardiac outcomes, patients can not benefit from hypothermia-mediated brain protection. The present study evaluated the effects of long-term ECLHA with mild to moderate hypothermia (33 degrees C) in a canine model of prolonged cardiac arrest.

METHODS

15 dogs were assigned to either the hypothermic (seven dogs, 33 degrees C) or normothermic group (eight dogs, 37.5 degrees C). All dogs were induced to normothermic ventricular fibrillation (VF) for 15 min, followed by 24 h of ECLHA and 72 h of intensive care. The hypothermia group maintained core (pulmonary artery) temperature at 33 degrees C for 20 h starting from resuscitation, then were rewarmed by 28 h. Outcome evaluations included: (1) mortality; (2) catecholamine dose; (3) time to extubation; (4) necrotic myocardial mass (g); and (5) neurological deficits score (NDS).

RESULTS

in the normothermic group five dogs died of cardiogenic shock and one dog succumbed to poor oxygenation. The two surviving dogs remained comatose (NDS 60.5 +/- 4.9%) with necrotic myocardial mass of 14.5 +/- 3.5 g. In the hypothermic group, one dog died from pulmonary dysfunction, the other six dogs survived. The surviving dogs showed brain damage (29.8 +/- 2.5%), but there was evidence of some brain-protective effect. The mass of necrotic myocardium was 4.2 +/- 1.3 g in the hypothermic group or 3.4 times smaller than in the normothermic group. The survival rate was significantly higher in the hypothermic than in the normothermic group (P < 0.05). The catecholamine requirement was also lower in the hypothermic than in the normothermic dogs (P < 0.05).

CONCLUSIONS

Long-term mild to moderate hypothermia with ECLHA induced immediately after cardiac arrest improved survival as well as cerebral and cardiac outcomes.

Heparin bonding of the extracorporeal circuit reduces thrombosis during prolonged lung assist in goats

This study investigated whether an artificial membrane lung of nonmicroporous polyolefin hollow fibers bonded with heparin could prolong venoarterial extracorporeal lung assist (ECLA) with low dose systemic heparin in goats. We compared heparin bonded circuits (Carmeda Bioactive Surface, "HB" group, n = 5) with non heparin bonded circuits ("NHB" group, n = 5) in venoarterial ECLA (V-A ECLA) for 7 days. Activated coagulation time (ACT) was maintained at approximately 130 sec by systemic infusion of small doses of heparin in the HB group, and at 200-230 sec in the NHB group. Thrombus formation was assessed by visual examination of the circuit, and possible cerebral embolization of thrombi was observed from behavioral abnormalities of the animals. The mean heparin dose given during ECLA was 20.4 +/- 3.6 U/kg per hr in HB, and 50.9 +/- 14.2 U/kg per hr in NHB, significantly less in HB than NHB (p < 0.01). Blood gas changes across the oxygenator, bypass flow rate, platelet aggregation activity, platelet counts, fibrin monomer (FM) test, and antithrombin-III (AT-III) activity did not differ between the two groups. In HB, thrombi were fewer and no abnormal neurologic symptoms were observed during ECLA. Numerous thrombi were observed in all oxygenators with NHB. One NHB goat developed convulsions and cerebral hemorrhage on the 6th day of ECLA. Nonmicroporous polyolefin hollow fibers can be bonded with heparin. An artificial membrane lung constructed of these fibers showed good anticoagulation by decreased thrombus formation with a small dose of infused heparin.

Total and prolonged filling of the lungs with Ringer's solution under extracorporeal lung assist (ECLA) in dogs

BACKGROUND

Massive alveolar lavage has been used clinically to remove materials accumulated in the alveoli. Recently, filling the lungs with oxygenated perfluorochemical (total liquid ventilation) has been investigated. However, effects of complete and prolonged filling of bilateral lungs with aqueous fluid, such as saline or Ringer's solution, has not been evaluated, although it is possible to sustain gas exchange without the natural lung by using extracorporeal circulation and an artificial lung (extracorporeal lung assist: ECLA). It is also not known whether the lung can recover gas exchange ability after prolonged fluid filling.

METHODS

Normal mongrel dogs were endotracheally intubated under general anesthesia and mechanically ventilated. After initiation of venoarterial ECLA, warmed lactated Ringer's solution was instilled into the lungs through the endotracheal tube, and the lungs were completely filled at a hydrostatic pressure of 15 cmH2O (fluid-filled group: group F). After the lungs were filled for 4 h, the fluid was drained and ventilation was re-instituted. ECLA, then mechanical ventilation was gradually weaned within 24 h after fluid drainage. In control group (group C), dogs were kept apneic for 4 h with their lungs inflated at an airway pressure of 15 cmH2O with air.

RESULTS

Transient hypoxemia occurred during fluid filling but every dog could be weaned from ECLA and mechanical ventilation to spontaneous respiration. The average rate of fluid absorption from the lung during fluid filling was 4.2+/-1.8 ml kg(-1) h(-1). After fluid drainage and restart of mechanical ventilation, bilateral lungs were expanded and well aerated. Total static respiratory system compliance (static compliance) remained unchanged even after fluid filling, and the weight of the lung water did not increase significantly compared to that in group C. Total urine volume was significantly increased in group E Histologically, alveolar structures were preserved and no interstitial edema or bleeding was seen in either group.

CONCLUSION

Complete filling of the bilateral lungs for 4 h with lactated Ringer's solution under ECLA causes no deterioration in gas exchange or static compliance in normal dogs, although transient hypoxemia occurs during fluid filling.

Jugular vein temperature reflects brain temperature during hypothermia

PURPOSE

The neuroprotective properties of mild to moderate hypothermia are well recognized but may not be employed correctly because brain temperature cannot usually be measured directly. This study investigated the jugular vein as a more accessible site that accurately reflects the actual brain temperature during mild, induced hypothermia.

METHODS

We selected ten mongrel dogs (mean weight 12 +/- 2 kg) and measured temperatures of the brain, jugular vein, cisterna magna, pulmonary artery and rectum during hypothermia, including cooling and rewarming. The brain temperature needle probe was inserted 2.0 cm into the parenchyma. A temperature probe was placed in the cisterna magna with an epidural needle. Swan-Ganz thermistor probes measured the jugular venous and pulmonary artery blood temperatures.

RESULT

The brain temperature decreased from 37.5 +/- 0.3 to 33.0 +/- 0.3 degrees C over an average 150 +/- 45 min cooling period. Stable cool was maintained for 245 +/- 32 min, followed by 165 +/- 50 min for rewarming from 33.5 +/- 0.3 to 37.5 +/- 0.3 degrees C. Jugular, cisterna magna and pulmonary arterial blood (PAB), but not rectal temperature, were close to brain temperature during stable cool. The mean jugular and cisterna magna temperatures were near the brain temperature at 0.1 degrees C higher and 0.1 degrees C lower, respectively. No significant effects of hypothermia were noted on hemodynamics in any phase.

CONCLUSION

Jugular vein temperature, along with cisterna magna and pulmonary artery blood and rectal temperature, reflected brain temperature during hypothermia. The jugular vein and cisterna magna sites more sensitively reflected brain temperature than other sites.

Sero- and molecular typing of Duffy blood group in Southeast Asians and Oceanians

Duffy blood group was studied among malaria-endemic Thai and Indonesian populations: Hmong (n = 103), Akha (n = 218), Lisu (n = 44), Bugis (n = 95), Toraja (n = 77), Dani (n = 44), Mee (n = 80) and Irianese (n = 81). Phenotypes were studied by the ordinal indirect Coombs' test and genotypes were determined by the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) test. DNA analysis was used to type the Duffy blood group system. Deduced allele frequencies of Fya (0.958-1.0) based on the phenotypes were similar to those in other populations in Southeast Asia and Oceania. The study revealed the presence of Fya-antigens showing weak reactivity to antisera as well as a discrepancy between the genotype shown by the PCR-RFLP study and that predicted by the phenotype. The PCR-RFLP study also suggested the presence of an alternative genetic basis for the Fy(a- b-) phenotype, which differs from the African type.

Molecular cloning of the Lon protease gene from Thermus thermophilus HB8 and characterization of its gene product

The gene encoding Lon protease was isolated from an extreme thermophile, Thermus thermophilus HB8. Sequence analysis demonstrated that the T. thermophilus Lon protease gene (TT-lon) contains a protein-coding sequence consisting of 2385 bp which is approximately 56% homologous to the Escherichia coli counterpart. As expected, the G/C content of TT-lon was 68%, which is significantly higher than that of the E. coli lon gene (52% G/C). The amino acid sequence of T. thermophilus Lon protease (TT-Lon) predicted from the nucleotide sequence contained several unique sequences conserved in other Lon proteases: (a) a cysteine residue at the position just before the putative ATP-binding domain; (b) motif A and B sequences required for composition of the ATP-binding domain; and (c) a serine residue at the proteolytic active site. Expression of TT-lon under the control of the T7 promoter in E. coli produced an 89-kDa protein with a yield of approximately 5 mg.L-1. Recombinant TT-Lon (rTT-Lon) was purified to homogeneity by sequential column chromatography. The peptidase activity of rTT-Lon was activated by ATP and alpha-casein. rTT-Lon cleaved succinyl-phenylalanyl-leucyl-phenylalanyl-methoxynaphthylamide much more efficiently than succinyl-alanyl-alanyl-phenylalanyl-methoxynaphthylamide, whereas both peptides were cleaved with comparable efficiencies by E. coli Lon. These results suggest that there is a difference between TT-Lon and E. coli Lon in substrate specificity. rTT-Lon most effectively cleaved substrate peptides at 70 degrees C, which was significantly higher than the optimal temperature (37 degrees C) for E. coli Lon. Together, these results indicate that the TT-lon gene isolated from T. thermophilus HB8 actually encodes an ATP-dependent thermostable protease Lon.