Dependence of the Second-order G'-band Profile on the Electronic Structure of Single-wal Nanotubes

We analyze the dependence of the second-order G'-band profile in terms of their (n,m) indices by measuring the resonance Raman spectra of several semiconducting and metalic isolated single wal carbon nanotubes. We show that this profile is very sensitive to the electronic structure, thus making it possible to get structural (n,m) information and to probe the splitting of the van Hove singularities in the electronic density of states due to the trigona warping effect.

Generation and detection of plasmonic nanobubbles in zebrafish

The zebrafish embryo has been evaluated as an in vivo model for plasmonic nanobubble (PNB) generation and detection at nanoscale. The embryo is easily observed and manipulated utilizing the same methodology as for application of PNBs in vitro. Injection and irradiation of gold nanoparticles with a short laser pulse resulted in generation of PNBs in zebrafish with similar parameters as for PNBs generated in water and cultured living cells. These PNBs do not result in systemic damage, thus we demonstrated an in vivo model for rapid and precise testing of plasmonic nanotechnologies.

Tunable plasmonic nanobubbles for cell theranostics

Combining diagnostic and therapeutic processes into one (theranostics) and improving their selectivity to the cellular level may offer significant benefits in various research and disease systems and currently is not supported with efficient methods and agents. We have developed a novel method based on the gold nanoparticle-generated transient photothermal vapor nanobubbles, that we refer to as plasmonic nanobubbles (PNB). After delivery and clusterization of the gold nanoparticles (NP) to the target cells the intracellular PNBs were optically generated and controlled through the laser fluence. The PNB action was tuned in individual living cells from non-invasive high-sensitive imaging at lower fluence to disruption of the cellular membrane at higher fluence. We have achieved non-invasive 50-fold amplification of the optical scattering amplitude with the PNBs (relative to that of NPs), selective mechanical and fast damage to specific cells with bigger PNBs, and optical guidance of the damage through the damage-specific signals of the bubbles. Thus the PNBs acted as tunable theranostic agents at the cellular level and in one process that have supported diagnosis, therapy and guidance of the therapy.

Direct imaging of human SWI/SNF-remodeled mono- and polynucleosomes by atomic force microscopy employing carbon nanotube tips

Chromatin-remodeling complexes alter chromatin structure to facilitate, or in some cases repress, gene expression. Recent studies have suggested two potential pathways by which such regulation might occur. In the first, the remodeling complex repositions nucleosomes along DNA to open or occlude regulatory sites. In the second, the remodeling complex creates an altered dimeric form of the nucleosome that has altered accessibility to transcription factors. The extent of translational repositioning, the structure of the remodeled dimer, and the presence of dimers on remodeled polynucleosomes have been difficult to gauge by biochemical assays. To address these questions, ultrahigh-resolution carbon nanotube tip atomic force microscopy was used to examine the products of remodeling reactions carried out by the human SWI/SNF (hSWI/SNF) complex. We found that mononucleosome remodeling by hSWI/SNF resulted in a dimer of mononucleosomes in which approximately 60 bp of DNA is more weakly bound than in control nucleosomes. Arrays of evenly spaced nucleosomes that were positioned by 5S rRNA gene sequences were disorganized by hSWI/SNF, and this resulted in long stretches of bare DNA, as well as clusters of nucleosomes. The formation of structurally altered nucleosomes on the array is suggested by a significant increase in the fraction of closely abutting nucleosome pairs and by a general destabilization of nucleosomes on the array. These results suggest that both the repositioning and structural alteration of nucleosomes are important aspects of hSWI/SNF action on polynucleosomes.

Structural and functional imaging with carbon nanotube AFM probes

Atomic force microscopy (AFM) has great potential as a tool for structural biology, a field in which there is increasing demand to characterize larger and more complex biomolecular systems. However, the poorly characterized silicon and silicon nitride probe tips currently employed in AFM limit its biological applications. Carbon nanotubes represent ideal AFM tip materials due to their small diameter, high aspect ratio, large Young's modulus, mechanical robustness, well-defined structure, and unique chemical properties. Nanotube probes were first fabricated by manual assembly, but more recent methods based on chemical vapor deposition provide higher resolution probes and are geared towards mass production, including recent developments that enable quantitative preparation of individual single-walled carbon nanotube tips [J. Phys. Chem. B 105 (2001) 743]. The high-resolution imaging capabilities of these nanotube AFM probes have been demonstrated on gold nanoparticles and well-characterized biomolecules such as IgG and GroES. Using the nanotube probes, new biological structures have been investigated in the areas of amyloid-beta protein aggregation and chromatin remodeling, and new biotechnologies have been developed such as AFM-based haplotyping. In addition to measuring topography, chemically functionalized AFM probes can measure the spatial arrangement of chemical functional groups in a sample. However, standard silicon and silicon nitride tips, once functionalized, do not yield sufficient resolution to allow combined structural and functional imaging of biomolecules. The unique end-group chemistry of carbon nanotubes, which can be arbitrarily modified by established chemical methods, has been exploited for chemical force microscopy, allowing single-molecule measurements with well-defined functionalized tips.

Fabry - Perot interference in a nanotube electron waveguide

The behaviour of traditional electronic devices can be understood in terms of the classical diffusive motion of electrons. As the size of a device becomes comparable to the electron coherence length, however, quantum interference between electron waves becomes increasingly important, leading to dramatic changes in device properties. This classical-to-quantum transition in device behaviour suggests the possibility for nanometer-sized electronic elements that make use of quantum coherence. Molecular electronic devices are promising candidates for realizing such device elements because the electronic motion in molecules is inherently quantum mechanical and it can be modified by well defined chemistry. Here we describe an example of a coherent molecular electronic device whose behaviour is explicitly dependent on quantum interference between propagating electron waves-a Fabry-Perot electron resonator based on individual single-walled carbon nanotubes with near-perfect ohmic contacts to electrodes. In these devices, the nanotubes act as coherent electron waveguides, with the resonant cavity formed between the two nanotube-electrode interfaces. We use a theoretical model based on the multichannel Landauer-Büttiker formalism to analyse the device characteristics and find that coupling between the two propagating modes of the nanotubes caused by electron scattering at the nanotube-electrode interfaces is important.

Structural ( n, m) determination of isolated single-wall carbon nanotubes by resonant Raman scattering

We show that the Raman scattering technique can give complete structural information for one-dimensional systems, such as carbon nanotubes. Resonant confocal micro-Raman spectroscopy of an (n,m) individual single-wall nanotube makes it possible to assign its chirality uniquely by measuring one radial breathing mode frequency omega(RBM) and using the theory of resonant transitions. A unique chirality assignment can be made for both metallic and semiconducting nanotubes of diameter d(t), using the parameters gamma(0) = 2.9 eV and omega(RBM) = 248/d(t). For example, the strong RBM intensity observed at 156 cm(-1) for 785 nm laser excitation is assigned to the (13,10) metallic chiral nanotube on a Si/SiO2 surface.

Resonant electron scattering by defects in single-walled carbon nanotubes

We report the characterization of defects in individual metallic single-walled carbon nanotubes by transport measurements and scanned gate microscopy. A sizable fraction of metallic nanotubes grown by chemical vapor deposition exhibits strongly gate voltage-dependent resistance at room temperature. Scanned gate measurements reveal that this behavior originates from resonant electron scattering by defects in the nanotube as the Fermi level is varied by the gate voltage. The reflection coefficient at the peak of a scattering resonance was determined to be about 0.5 at room temperature. An intratube quantum dot device formed by two defects is demonstrated by low-temperature transport measurements.

Structural biology with carbon nanotube AFM probes

Carbon nanotubes represent ideal probes for high-resolution structural and chemical imaging of biomolecules with atomic force microscopy. Recent advances in fabrication of carbon nanotube probes with sub-nanometer radii promise to yield unique insights into the structure, dynamics and function of biological macromolecules and complexes.

Carbon nanotube atomic force microscopy tips: direct growth by chemical vapor deposition and application to high-resolution imaging

Carbon nanotubes are potentially ideal atomic force microscopy probes because they can have diameters as small as one nanometer, have robust mechanical properties, and can be specifically functionalized with chemical and biological probes at the tip ends. This communication describes methods for the direct growth of carbon nanotube tips by chemical vapor deposition (CVD) using ethylene and iron catalysts deposited on commercial silicon-cantilever-tip assemblies. Scanning electron microscopy and transmission electron microscopy measurements demonstrate that multiwalled nanotube and single-walled nanotube tips can be grown by predictable variations in the CVD growth conditions. Force-displacement measurements made on the tips show that they buckle elastically and have very small (</= 100 pN) nonspecific adhesion on mica surfaces in air. Analysis of images recorded on gold nanoparticle standards shows that these multi- and single-walled carbon nanotube tips have radii of curvature of 3-6 and 2-4 nm, respectively. Moreover, the nanotube tip radii determined from the nanoparticle images are consistent with those determined directly by transmission electron microscopy imaging of the nanotube ends. These molecular-scale CVD nanotube probes have been used to image isolated IgG and GroES proteins at high-resolution.

Fullerene pipes

Single-wall fullerene nanotubes were converted from nearly endless, highly tangled ropes into short, open-ended pipes that behave as individual macromolecules. Raw nanotube material was purified in large batches, and the ropes were cut into 100- to 300-nanometer lengths. The resulting pieces formed a stable colloidal suspension in water with the help of surfactants. These suspensions permit a variety of manipulations, such as sorting by length, derivatization, and tethering to gold surfaces.

Unraveling Nanotubes: Field Emission from an Atomic Wire

Field emission of electrons from individually mounted carbon nanotubes has been found to be dramatically enhanced when the nanotube tips are opened by laser evaporation or oxidative etching. Emission currents of 0.1 to 1 microampere were readily obtained at room temperature with bias voltages of less than 80 volts. The emitting structures are concluded to be linear chains of carbon atoms, Cn, (n = 10 to 100), pulled out from the open edges of the graphene wall layers of the nanotube by the force of the electric field, in a process that resembles unraveling the sleeve of a sweater.

Growth and Sintering of Fullerene Nanotubes

Carbon nanotubes produced in arcs have been found to have the form of multiwalled fullerenes, at least over short lengths. Sintering of the tubes to each other is the predominant source of defects that limit the utility of these otherwise perfect fullerene structures. The use of a water-cooled copper cathode minimized such defects, permitting nanotubes longer than 40 micrometers to be attached to macroscopic electrodes and extracted from the bulk deposit. A detailed mechanism that features the high electric field at (and field-emission from) open nanotube tips exposed to the arc plasma, and consequent positive feedback effects from the neutral gas and plasma, is proposed for tube growth in such arcs.