Ultrafast photoelectron spectroscopy of photoexcited aqueous ferrioxalate

The photochemistry of metal-organic compounds in solution is determined by both intra- and inter-molecular relaxation processes after photoexcitation. Understanding its prime mechanisms is crucial to optimise the reactive paths and control their outcome. Here we investigate the photoinduced dynamics of aqueous ferrioxalate ([Fe^III(C₂O₄)₃]^3-) upon 263 nm excitation using ultrafast liquid phase photoelectron spectroscopy (PES). The initial step is found to be a ligand-to-metal electron transfer, occuring on a time scale faster than our time resolution (≲30 fs). Furthermore, we observe that about 25% of the initially formed ferrous species population are lost in ∼2 ps. Cast in the contest of previous ultrafast infrared and X-ray spectroscopic studies, we suggest that upon prompt photoreduction of the metal centre, the excited molecules dissociate in <140 fs into the pair of CO₂ and [(CO₂)Fe^II(C₂O₄)₂]^3- fragments, with unity quantum yield. About 25% of these pairs geminately recombine in ∼2 ps, due to interaction with the solvent molecules, reforming the ground state of the parent ferric molecule.

Immunogenicity and safety of a quadrivalent meningococcal tetanus toxoid-conjugate vaccine administered concomitantly with other paediatric vaccines in toddlers: a phase III randomised study

Invasive meningococcal disease has high morbidity and mortality, with infants and young children among those at greatest risk. This phase III, open-label, randomised study in toddlers aged 12-23 months evaluated the immunogenicity and safety of meningococcal tetanus toxoid-conjugate vaccine (MenACYW-TT), a tetanus toxoid conjugated vaccine against meningococcal serogroups A, C, W and Y, when coadministered with paediatric vaccines (measles, mumps and rubella [MMR]; varicella [V]; 6-in-1 combination vaccine against diphtheria, tetanus, pertussis, polio, hepatitis B and Haemophilus influenzae type b [DTaP-IPV-HepB-Hib] and pneumococcal conjugate vaccine [PCV13])(NCT03205371). Immunogenicity to each meningococcal serogroup was assessed by serum bactericidal antibody assay using human complement (hSBA). Vaccine safety profiles were described up to 30 days post-vaccination. A total of 1183 participants were enrolled. The proportion with seroprotection (hSBA ≥1:8) to each meningococcal serogroup at Day 30 was comparable between the MenACYW-TT and MenACYW-TT + MMR + V groups (≥92 and ≥96%, respectively), between the MenACYW-TT and MenACYW-TT + DTaP-IPV-HepB-Hib groups (≥90% for both) and between the MenACYW-TT and MenACYW-TT + PCV13 groups (≥91 and ≥84%, respectively). The safety profiles of MenACYW-TT, and MMR + V, DTaP-IPV-HepB-Hib, and PCV13, with or without MenACYW-TT, were generally comparable. Coadministration of MenACYW-TT with paediatric vaccines in toddlers had no clinically relevant effect on the immunogenicity and safety of any of the vaccines.

Photoemission from non-polar aromatic molecules in the gas and liquid phase

The photoelectron spectra of both liquid and gas phase aromatic molecules are reported. The spectra were obtained using a 34.1 eV source produced by high harmonic generation and analysed with the help of high-level ab initio simulations using the reflection principle combined with path integral molecular dynamics simulations accounting for nuclear quantum effects for the gas phase. We demonstrate the suitability of three trimethylbenzenes (1,3,5-trimethylbenzene, 1,2,3-trimethylbenzene and 1,2,4-trimethylbenzene) as a solvent for liquid photoelectron spectroscopy of solute species. We also discuss the electrokinetic charging of a non-polar liquid jet.

Influence of musculotendon geometry variability in muscle forces and hip bone-on-bone forces during walking

Inverse dynamics problems are usually solved in the analysis of human gait to obtain reaction forces and moments at the joints. However, these actions are not the actual forces and moments supported by the joint structure, because they do not consider the forces of the muscles acting across the joint. Therefore, to analyse bone-on bone forces it is necessary to estimate those muscle forces. Usually, this problem is addressed by means of optimization algorithms. One of the parameters required to solve this problem is the musculotendon geometry. These data are usually taken from cadavers or MRI data from several subjects, different from the analysed subject. Then, the model is scaled to the subject morphology. This procedure constitutes a source of error. The goals of this work were two. First, to perform a sensitivity analysis of the influence of muscle insertion locations on the muscle forces acting on the hip joint and on the hip joint bone-on-bone forces. Second, to compare the hip joint bone-on-bone forces during gait cycle obtained through muscle insertion locations taken from a musculoskeletal model template and a scaling procedure to those obtained from a subject-specific model using an MRI of the subject. The problem was solved using OpenSim. Results showed that anatomical variability should be analysed from two perspectives. One the one hand, throughout the gait cycle, in a global way. On the other hand, at a characteristic instant of the gait cycle. Variations of ±1 cm in the position of the attachment points of certain muscles caused variations of up to 14.21% in averaged deviation of the muscle forces and 58.96% in the peak force in the modified muscle and variations up to 57.23% in the averaged deviation of the muscle force and up to 117.23% in the peak force in the rest of muscles. Then, the influence of that variability on muscle activity patterns and hip bone-on-bone forces could be described more precisely. A biomechanical analysis of a subject-specific musculoskeletal model was carried out. Using MRI data, variations up to 5 cm in the location of the insertion points were introduced. These modifications showed significant differences between the baseline model and the customized model: within the range [-12%, 10%] for muscle forces and around 35% of body weight for hip bone-on-bone forces.

EARLY-ESLI study: Long-term experience with eslicarbazepine acetate after first monotherapy failure

PURPOSE

Evaluate real-life experience with eslicarbazepine acetate (ESL) after first monotherapy failure in a large series of patients with focal epilepsy.

METHOD

Multicentre, retrospective, 1-year, observational study in patients older than 18 years, with focal epilepsy, who had failed first antiepileptic drug monotherapy and who received ESL. Data from clinical records were analysed at baseline, 3, 6 and 12 months to assess effectiveness and tolerability.

RESULTS

Eslicarbazepine acetate was initiated in 253 patients. The 1-year retention rate was 92.9%, and the final median dose of ESL was 800 mg. At 12 months, 62.3% of patients had been seizure free for 6 months; 37.3% had been seizure free for 1 year. During follow-up, 31.6% of the patients reported ESL-related adverse events (AEs), most commonly somnolence (8.7%) and dizziness (5.1%), and 3.6% discontinued due to AEs. Hyponatraemia was observed in seven patients (2.8%). After starting ESL, 137 patients (54.2%) withdrew the prior monotherapy and converted to ESL monotherapy; 75.9% were seizure free, 87.6% were responders, 4.4% worsened, and 23.4% reported ESL-related AEs.

CONCLUSION

Use of ESL after first monotherapy failure was associated with an optimal seizure control and tolerability profile. Over half of patients were converted to ESL monotherapy during follow-up.

Removal of sulfur-containing organic molecules adsorbed on inorganic supports by Rhodococcus Rhodochrous spp

OBJECTIVE

To remove dibenzothiophene (DBT) and 4,6-dimethyl-dibenzothiophene (4,6-DMDBT) adsorbed on alumina, silica and sepiolite through biodesulfurization (BDS) using Rhodococcus Rhodochrous spp., that selectively reduce sulfur molecules without generating of gaseous pollutants.

RESULTS

The adsorption of DBT and 4,6-DMDBT was affected by the properties of the supports, including particle size and the presence of surface acidic groups. The highest adsorption of both sulfur-containing organic molecules used particle sizes of 0.43-0.063 mm. The highest percentage removal was with sepiolite (80 % for DBT and 56 % for 4,6-DMDBT) and silica (71 % for DBT and 37 % for 4,6-DMDBT). This is attributed to the close interaction between these supports and the bacteria.

CONCLUSIONS

Biodesulfurization is effective for removing the sulfur-containing organic molecules adsorbed on inorganic materials and avoids the generation of gaseous pollutants.

Laser-Assisted Photoelectric Effect from Liquids

The laser-assisted photoelectric effect from liquid surfaces is reported for the first time. Photoelectrons generated by 35.6 eV radiation from a liquid microjet of water under vacuum are dressed with a ℏω=1.55  eV laser field. The subsequent redistribution of the photoelectron energies consists in the appearance of sidebands shifted by energies equivalent to ℏω, 2ℏω, and 3ℏω. The response has been modeled to the third order and combined with energy-resolved measurements. This result opens the possibility to investigate the dynamics at surfaces of liquid solutions and provide information about the electron emission process from a liquid.

Harmonium: A pulse preserving source of monochromatic extreme ultraviolet (30-110 eV) radiation for ultrafast photoelectron spectroscopy of liquids

A tuneable repetition rate extreme ultraviolet source (Harmonium) for time resolved photoelectron spectroscopy of liquids is presented. High harmonic generation produces 30-110 eV photons, with fluxes ranging from ∼2 × 10(11) photons/s at 36 eV to ∼2 × 10(8) photons/s at 100 eV. Four different gratings in a time-preserving grating monochromator provide either high energy resolution (0.2 eV) or high temporal resolution (40 fs) between 30 and 110 eV. Laser assisted photoemission was used to measure the temporal response of the system. Vibrational progressions in gas phase water were measured demonstrating the ∼0.2 eV energy resolution.

Set-up for broadband Fourier-transform multidimensional electronic spectroscopy

We present a compact passively phase-stabilized ultra-broadband 2D Fourier transform setup. A gas (argon)-filled hollow core fiber pumped by an amplified Ti:Al2O3 laser is used as a light source providing spectral range spanning from 420 to 900 nm. Sub-10-fs pulses were obtained using a deformable mirror-based pulse shaper. We probe the nonlinear response of Rhodamine 101 using 90 nm bandwidth and resolve vibrational coherences of 150 fs period in the ground state.

A simple electron time-of-flight spectrometer for ultrafast vacuum ultraviolet photoelectron spectroscopy of liquid solutions

We present a simple electron time of flight spectrometer for time resolved photoelectron spectroscopy of liquid samples using a vacuum ultraviolet (VUV) source produced by high-harmonic generation. The field free spectrometer coupled with the time-preserving monochromator for the VUV at the Artemis facility of the Rutherford Appleton Laboratory achieves an energy resolution of 0.65 eV at 40 eV with a sub 100 fs temporal resolution. A key feature of the design is a differentially pumped drift tube allowing a microliquid jet to be aligned and started at ambient atmosphere while preserving a pressure of 10(-1) mbar at the micro channel plate detector. The pumping requirements for photoelectron (PE) spectroscopy in vacuum are presented, while the instrument performance is demonstrated with PE spectra of salt solutions in water. The capability of the instrument for time resolved measurements is demonstrated by observing the ultrafast (50 fs) vibrational excitation of water leading to temporary proton transfer.

The hydrocarbon-degrading marine bacterium Cobetia sp. strain MM1IDA2H-1 produces a biosurfactant that interferes with quorum sensing of fish pathogens by signal hijacking

Biosurfactants are produced by hydrocarbon-degrading marine bacteria in response to the presence of water-insoluble hydrocarbons. This is believed to facilitate the uptake of hydrocarbons by bacteria. However, these diffusible amphiphilic surface-active molecules are involved in several other biological functions such as microbial competition and intra-or inter-species communication. We report the isolation and characterization of a marine bacterial strain identified as Cobetia sp. MM1IDA2H-1, which can grow using the sulfur-containing heterocyclic aromatic hydrocarbon dibenzothiophene (DBT). As with DBT, when the isolated strain is grown in the presence of a microbial competitor, it produces a biosurfactant. Because the obtained biosurfactant was formed by hydroxy fatty acids and extracellular lipidic structures were observed during bacterial growth, we investigated whether the biosurfactant at its critical micelle concentration can interfere with bacterial communication systems such as quorum sensing. We focused on Aeromonas salmonicida subsp. salmonicida, a fish pathogen whose virulence relies on quorum sensing signals. Using biosensors for quorum sensing based on Chromobacterium violaceum and Vibrio anguillarum, we showed that when the purified biosurfactant was mixed with N-acyl homoserine lactones produced by A. salmonicida, quorum sensing was inhibited, although bacterial growth was not affected. In addition, the transcriptional activities of A. salmonicida virulence genes that are controlled by quorum sensing were repressed by both the purified biosurfactant and the growth in the presence of Cobetia sp. MM1IDA2H-1. We propose that the biosurfactant, or the lipid structures interact with the N-acyl homoserine lactones, inhibiting their function. This could be used as a strategy to interfere with the quorum sensing systems of bacterial fish pathogens, which represents an attractive alternative to classical antimicrobial therapies in fish aquaculture.

Numerical simulation of bone remodelling around dental implants

Crestal bone loss can result in the failure of dental implants and can be caused, by among other factors, the development of non-physiological mechanical conditions. Bone remodelling (BR) is the physiological process through which bone adapts itself to the mechanical environment. A previously published mathematical model of BR is used in this work to study the homogenized structural evolution of peri-implant bone. This model is used to study the influence of the diameter and length of a dental implant of pure titanium on its long-term stability. The temporal evolution of porosity and microstructural damage of the peri-implant bone are the variables analysed in this study. The results show that damage and porosity increase as the implant length decreases and, more pronouncedly, as its diameter decreases. The increase in damage and porosity levels is localized, as many other studies confirm, at the implant neck due to the stress concentration that is created in that area. The main conclusion of this study is that in implants with a diameter equal to or greater than 3 mm the damage is under control and there is no mechanical failure of the peri-implant bone in the long term.

Biodesulfurization of gas oil using inorganic supports biomodified with metabolically active cells immobilized by adsorption

The immobilization of Pseudomonas stutzeri using adsorption on different inorganic supports was studied in relation to the number of adsorbed cells, metabolic activity and biodesulfurization (BDS). The electrophoretic migration (EM) measurements and Tetrazolioum (TTC) method were used to evaluate adsorption and metabolic activity. Results indicate that maximal immobilization was obtained with an initial load of 14 x 10(8) cells mL(-1) for Al and Sep, whereas Ti requires 20 x 10(8) cells mL(-1). The highest interaction was observed in the P. stutzeri/Si and P. stutzeri/Sep biocatalysts. The IEP values and metabolic activities indicate that P. stutzeri change the surface of supports and maintains metabolic activity. A direct relation between BDS activity and the adsorption capacity of the bacterial cells was observed at the adsorption/desorption equilibrium level. The biomodification of inorganic supports by the adsorption process increases the bioavailability of sulphur substrates for bacterial cells, improving BDS activity.

New irradiation facility for biomedical applications at the RA-3 reactor thermal column

A new irradiation facility has been developed in the RA-3 reactor in order to perform trials for the treatment of liver metastases using boron neutron capture therapy (BNCT). RA-3 is a production research reactor that works continuously five days a week. It had a thermal column with a small cross section access tunnel that was not accessible during operation. The objective of the work was to perform the necessary modifications to obtain a facility for irradiating a portion of the human liver. This irradiation facility must be operated without disrupting the normal reactor schedule and requires a highly thermalized neutron spectrum, a thermal flux of around 10(10) n cm(-2)s(-1) that is as isotropic and uniform as possible, as well as on-line instrumentation. The main modifications consist of enlarging the access tunnel inside the thermal column to the suitable dimensions, reducing the gamma dose rate at the irradiation position, and constructing properly shielded entrance gates enabled by logical control to safely irradiate and withdraw samples with the reactor at full power. Activation foils and a neutron shielded graphite ionization chamber were used for a preliminary in-air characterization of the irradiation site. The constructed facility is very practical and easy to use. Operational authorization was obtained from radioprotection personnel after confirming radiation levels did not significantly increase after the modification. A highly thermalized and homogenous irradiation field was obtained. Measurements in the empty cavity showed a thermal flux near 10(10) n cm(-2)s(-1), a cadmium ratio of 4100 for gold foils and a gamma dose rate of approximately 5 Gy h(-1).

Absorption spectra of dye solutions measured using a white light thermal lens spectrophotometer

We describe a two-beam thermal lens spectrophotometer that uses a xenon lamp as the excitation source and a low power diode pumped Nd-YAG laser as the probe light. The white light from the xenon source is filtered using a variable interference filter producing a partial monochromatic light within the spectral range 400-700 nm and with a spectral resolution of 10 nm. We measure the thermal lens spectrum of a nonfluorescent dye (Malachite Green) and show that this spectrum reproduces its absorbance spectra measured by the usual transmission method. A comparison of the thermal lens and the absorbance spectra of a fluorescent dye (Rhodamine B) reveals substantial differences. These differences can yield important applications of the device for the characterization of fluorescent materials.

[Epizootic outbreaks of trichinosis in 2 pig farms from the Metropolitan Region of Chile]

In Chile swine trichinosis has presented a progressive decreasing in the last two decades of XX century. T. spiralis pig infection descended from an average of 0.683 per 1000 in 1980-1984 to 0.315 in 1985-1989 and to 0.115 in 1990-1996. In the particular case of Metropolitan Region this decreasing has been more marked: from an average of 0.058 per 1000 in 1990-1994 to 0.003 in 1995-1999. Between the end of June 1999 and middle January 2000 in Metropolitan Region abattoirs T. spiralis was detected in 15 (4.9%) out of 306 swine from two pigsties located in El Monte (E.M.) and Padre Hurtado (P.H.) 45 and 30 km south-west from Santiago. In the same period another four pigs from the same premises were found infected in abattoirs of other regions. During inspection visits it was stated that both pig farms had deficient sanitary conditions. Phototrichinoscopy was positive in three out of five Rattus norvegicus collected in E.M. In pigsty PH the examination of diaphragm samples of 25 dogs and 17 cats resulted negative. In the premises originating T. spirali infected swine the Metropolitan Environmental Health Service Abattoirs Program carries out an epidemiological vigilance consisting in the follow-up of animals destined for slaughtering in order to initiate prophylactic actions oriented to eliminate eventual sources of trichinosis infection for human and rearing pigs.

Biocarbon device for cutaneous ureterostomy

The surgical technique for a new alternative to urinary diversion is described. The biocarbon conduit is an inert device implanted in the abdominal wall. Its inner end is anastomosed to the distal ureter, and the outlet is over the abdominal skin and connected to a collector tube into a urinary bag. Twenty implants were performed between March, 1980, and July, 1981. Seventeen patients had carcinoma of the uterine cervix, and 3 had carcinoma of the urinary bladder (age range 34 to 79 years). All had severe urinary tract infection, retrodilation, and were in poor general physical condition. Eight fistulas developed in the 20 implants.