Natural co-occurrence of aflatoxins and deoxynivalenol in poultry feed in Pakistan

Two hundred and fifteen broiler poultry feed samples were analysed over the time period of one year for the co-occurrence of aflatoxins and deoxynivalenol (DON). These were determined by GC-MS and ELISA, respectively. LOD values for aflatoxins and DON were 0.5 and 5 µg/kg, respectively. From all investigated 215 poultry feed samples, aflatoxins and DON co-occurred in 100 samples (46%). DON was detected in 114 samples while 100 samples also were positive for aflatoxins. Mean concentrations of positive samples for aflatoxins and DON were 18 and 807 µg/kg, respectively. Twenty-one DON-positive and 42 aflatoxin positive samples were contaminated above the EU maximum legal limits of 1000 µg/kg and 20 µg/kg, respectively. The present study provided useful data on aflatoxin and DON contamination, which may be helpful for future strategies to control contamination and to formulate standards in poultry feeds.

Assessment of pesticide residues in commonly used vegetables in Hyderabad, Pakistan

The aim of present study was to assess pesticide residues in vegetables in the Hyderabad region of Pakistan. The concentrations of six pesticides were determined by gas chromatography coupled with mass selective detector (GC-MSD) in locally produced vegetables purchased from wholesale markets. A total of 200 samples of eight vegetables viz. cauliflower, green chilli, eggplant, tomato, peas, bitter gourd, spinach and apple gourd were analyzed for pesticide residues. The results indicated that almost all samples were contained pesticides, only 39% contained pesticide residues at or below maximum residue limits (MRLs), and 61% contained pesticide residues above MRLs. From the six analyzed pesticides, carbofuran and chlorpyrifos were found above to MRLs with concentrations ranging from 0.01-0.39 and 0.05-0.96 mg/kg, respectively. The results provided important information on the current pesticide contamination status of some commonly used vegetables and pointed an urgent need to control the use of some excessively applied and potentially persistent pesticides, such as carbofuran and chlorpyrifos.

An excellent fluoride sorption behavior of modified amberlite resin

The article describes a convenient method for the modification of Amberlite XAD-4 resin by introducing thio-urea binding sites onto the aromatic rings. The modified (ATU) resin has been employed for the quantitative sorption of fluoride ions in batch as well as column experiments. The parameters (i.e. pH, contact time, etc.) were optimized and desorption of fluoride ions was fulfilled by using 0.01 M HCl solution. The equation isotherms such as Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin were also successfully applied to model the experimental data. The sorption capacity of the ATU resin was found as 3.286 mmol g(-1). From the D-R isotherm parameters, it has been calculated that the uptake of fluoride ion by ATU resin occurs through ion exchange sorption mechanism. The study will contribute toward the remediation of fluoride polluted areas as well as in the various fields of materials science.

Quantitative separation of oxytocin, norfloxacin and diclofenac sodium in milk samples using capillary electrophoresis

A simple, sensitive and rapid method has been developed for simultaneous separation and quantification of three different drugs: oxytocin (OT), norfloxacin (NOR) and diclofenac (DIC) sodium in milk samples using capillary electrophoresis (CE) with UV detection at 220 nm. Factors affecting the separation were pH, concentration of buffer and applied voltage. Separation was obtained in less than 9 min with sodium tetraborate buffer of pH 10.0 and applied voltage 30 kV. The separation was carried out from uncoated fused silica capillary with effective length of 50 cm with 75 microm i.d. The carrier electrolyte gave reproducible separation with calibration plots linear over 0.15-4.0 microg/mL for OT, 5-1000 microg/mL for NOR and 3-125 microg/mL for DIC. The lower limits of detection (LOD) were found to be 50 ng/mL for OT, and 1 microg/mL for NOR and DIC. The method was validated for the analysis of drugs in milk samples and pharmaceutical preparations with recovery of drugs within the range 96-100% with RSD 0.9-2.8%.

Removal of fluoride from aqueous environment by modified Amberlite resin

Fluoride in drinking water above permissible level is responsible for human being affected by skeletal fluorosis. In this study, Amberlite XAD-4 has been modified by introducing amino group onto the aromatic ring for its application in fluoride remediation. Characterization of the modified resin was made by, FT-IR and elemental analysis (CHNS) techniques. The pH 9 was optimum value for quantitative sorption of fluoride in both batch and column experiments. The desorption of fluoride was achieved by using 10% HCl. The batch and column sorption studies of fluoride with modified resin were carried out to evaluate sorption isotherms too. Thus equation isotherms such as Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) were successfully used to model the experimental data. The sorption capacity of modified Amberlite XAD-4 resin was found as 5.04 x 10(-3) mol g(-1). From the D-R isotherm parameters, it has been evaluated that the uptake of fluoride by modified resin occurs through ion exchange adsorption mechanism. The study will contribute toward the removal of fluoride from the aqueous environment as well as in the field of analytical and environmental chemistry.

Lead sorption by waste biomass of hazelnut and almond shell

The potential to remove Pb(2+) ion from aqueous solutions using the shells of hazelnut (HNS) (Corylus avellana) and almond (AS) (Prunus dulcis) through biosorption was investigated in batch experiments. The main parameters influencing Pb(2+) ion sorption on HNS and AS were: initial metal ion concentration, amount of adsorbent, contact time and pH value of solution. The influences of initial Pb(2+) ion concentration (0.1-1.0mM), pH (2-9), contact time (10-240 min) and adsorbent amount (0.1-1.0 g) have been investigated. Equilibrium isotherms have been measured and modelled. Adsorption of Pb(2+) ions was in all cases pH-dependent showing a maximum at equilibrium pH values between 6.0 and 7.0, depending on the biomaterial, that corresponded to equilibrium pH values of 6.0 for HNS and 7.0 for AS. The equilibrium sorption capacities of HNS and AS were 28.18 and 8.08 mg/g for lead, respectively after equilibrium time of 2h. The adsorption data fit well with the Langmuir isotherm model and the experimental result inferred that adsorption, chelation and ion exchange are major adsorption mechanisms for binding Pb(2+) ion to the sorbents.

Use of modified sorbent for the separation and preconcentration of chromium species from industrial waste water

A simple and sensitive method based on solid phase extraction (SPE) on acetyl acetone modified XAD-16 has been established for separation of Cr (III) and Cr (VI) from and industrial water samples. Two forms of chromium showed different exchange capacities at different pH values, viz. Cr (III) selectively retained at pH 5-7 whereas Cr (VI) retained at pH 1. Hence complete separation of the two forms of chromium is possible. Retained species were eluted with 5 mL of 2 mol L(-1) HNO(3) and 2 mol L(-1) NaOH. The detection limit of 0.02 and 0.014 microg mL(-1) was achieved for Cr (III) and Cr (VI), respectively, with an enrichment factor of 100 and 140. Various kinetic and thermodynamic parameters were also determined. The metal ion concentration was measured by atomic Absorption Spectroscopy. The possible retention mechanism is also discussed. The method was successfully applied for the speciation of chromium in industrial water samples.

Utilization of organic by-products for the removal of organophosphorous pesticide from aqueous media

Sorption potential of rice (Oryza sativa) bran and rice husk for the removal of triazophos (TAP), an organophosphate pesticide, has been studied. The specific surface area were found to be 19+/-0.7 m(2)g(-1) and 11+/-0.8m(2)g(-1) for rice bran and rice husk, respectively. Rice bran exhibited higher removal efficiency (98+/-1.3%) than rice husk (94+/-1.2%) by employing triazophos solution concentration of 3 x 10(-5) M onto 0.2 g of each sorbent for 120 min agitation time at pH 6 and 303 K. The concentration range (3.2-32) x 10(-5) M was screened and sorption capacities of rice bran and rice husk for triazophos were computed by different sorption isotherms. The energy of sorption for rice bran and rice husk was assessed as 14+/-0.1 and 11+/-0.2 kJ mol(-1) and kinetics of the sorption is estimated to be 0.016+/-0.002 and 0.013+/-0.002 min(-1), respectively. Intraparticle diffusion rate was computed to be 4+/-0.8 and 4+/-0.9 nmol g(-1)min(-1/2). Thermodynamic constants DeltaH, DeltaS and DeltaG at varying temperatures (283-323 K) were also calculated.

Synthesis, characterization and antioxidant activity copper-quercetin complex

Quercetin (3,3',4',5,7-pentahydroxyflavone) one of the most abundant dietary flavonoids, has been investigated in the presence of Cu(II) in methanol. The spectroscopic studies (UV-vis, (1)H NMR and IR) were useful to assess the relevant interaction of Quercetin with Cu(II) ions, the chelation sites and dependence of the complex structure from the metal/ligand ratio. A 1:2 (L:M) complex was indicated by Job's method of continuous variation, which was applied to ascertain the stoichiometric composition of the complex. The antioxidant activities of the compounds were evaluated by using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method. The complexed flavonoid was much more effective free radical scavengers than the free flavonoids.

Antioxidant potential of commercially available cumin (Cuminum cyminuml inn) in Pakistan

Owing to increased safety concerns about synthetic antioxidants, exploitation of safer antioxidants based on natural origin is the focus of research nowadays. Cumin is a common spice and is used as a routine supportive cooking agent. Extracts of cumin were prepared in methanol, ethanol, dichloromethane and hexane by employing Soxhlet extraction apparatus. Determination of the total phenolic content, chelating activity, reducing power and free radical scavenging activity were taken as parameters for the assessment of antioxidant properties. The findings of this study suggest cumin to be a potent source of antioxidants. Results from the different parameters were in agreement with one another.

The removal efficiency of chestnut shells for selected pesticides from aqueous solutions

The removal of selected pesticides such as carbofuran (CF) and methyl parathion (MP) using low-cost abundant sorbent chestnut shells from aqueous solutions has been investigated in the present study. The sorption parameters, i.e., contact time, pH, initial pesticide solution concentration and temperature have been studied. Maximum percent sorption (99+/-1%) was achieved for (0.38-3.80) x10(-4) and (0.45-4.5) x10(-4) mol dm(-3) of MP and CF pesticide solutions respectively, using 0.4 g of sorbent in 100 ml of solution for 30 min agitation time at pH 6. The Freundlich, Langmuir and Dubinin-Radushkevich (D-R) models have been applied, and their constants for methyl parathion and carbofuran, sorption intensity 1/n (0.55+/-0.02 and 0.54+/-0.04), multilayer sorption capacity C(m) (28.3+/-0.5 and 16.4+/-0.7) x10(-3) mol l(1-1/n)dm(3/n)g(-1), monolayer sorption capacity Q (22.5+/-0.5 and 10.8+/-0.3) x10(-6) mo lg(-1), binding energy, b (2.9+/-0.2 and 5.2+/-0.5) x10(4) dm(3)mol(-1), and sorption energy E (11.2+/-0.1 and 11.5+/-0.2 kJ mol(-1)) have been evaluated respectively. Lagergren, Morris-Weber and Reichenberg equations were employed to study kinetics of sorption process. Thermodynamic parameters DeltaH (-5.09+/-0.1 and 22.8+/-0.4 kJ mol(-1)), DeltaS (-4.33+/-0.0003 and 0.09+/-0.001 kJ mol(-1)K(-1)) and DeltaG((303K)) (-2.9 and -3.8 kJ mol(-1)) have been calculated for methyl parathion and carbofuran, respectively. The developed sorption procedure has been employed to environmental samples.

Rapid determination of free fatty acids in poultry feed lipid extracts by SB-ATR FTIR spectroscopy

A simple, rapid, and reproducible method has been developed for the quantitative determination of free fatty acid (FFA) content in lipids extracted from poultry feeds by Fourier transform infrared (FTIR) spectroscopy with the use of a single-bounce attenuated total reflectance (SB-ATR) accessory. An FTIR calibration curve was prepared by gravimetrically adding oleic acid (15-37%) to pure refined, bleached, and deodorized (RBD) canola oil and measuring the area of the COOH absorption band at 1710 cm-1. The oil from each of 12 poultry feed formulations was extracted using conventional Soxhlet extraction, and after evaporation of the solvent, the FFA content was determined by the conventional AOCS titrimetric procedure and by the SB-ATR/FTIR method. The SB-ATR/FTIR FFA predictions were related to those determined by the AOCS titrimetric method by linear regression, producing an R value of 0.999 and a SD of +/-0.28% FFA. Time-course spectra collected as lipids extracted into hexane indicated that a 15 min extraction was adequate to obtain a representative sample for FFA determination, with further extraction resulting in little, if any, change in the proportion of FFA in the lipid extract. Only a small volume of the hexane extract ( approximately 20 mL) yielded sufficient material for the SB-ATR/FTIR analysis. Thus, by shortening the extraction time and taking a small sample so as to reduce solvent removal time, the SB-ATR/FTIR procedure provides a very simple and rapid means of determining the FFA content of poultry feed lipids.

Sorption potential of Moringa oleifera pods for the removal of organic pollutants from aqueous solutions

Moringa oleifera pods Lamarck (Drumstick or Horseradish) is a multipurpose medium or small size tree from sub-Himalayan regions of north-west India and indigenous to many parts of Asia, Africa, South America, and in the Pacific and Caribbean Islands. Its pods (MOP) have been employed as an inexpensive and effective sorbent for the removal of organics, i.e., benzene, toluene, ethylbenzene and cumene (BTEC) from aqueous solutions using HPLC method. Effect of different parameters, i.e., sorbent dose 0.05-0.8g, 25cm(-3) agitation time 5-120min, pH 1-10, temperature 283-308K and concentration of sorbate (1.3-13)x10(-3), (1.1-11)x10(-3), (0.9-9)x10(-3), (0.8-8)x10(-3)moldm(-3), on the sorption potential of MOP for BTEC have been investigated. The pore area and average pore diameter of the MOP by BET method using nitrogen as a standard are calculated to be 28.06+/-0.8m(2)g(-1) and 86.2+/-1.3nm respectively. Freundlich, Langumir and Dubinin-Radushkevich (D-R) sorption isotherms were employed to evaluate the sorption capacity of MOP. Sorption capacities of BTEC onto MOP have been found to be 46+/-10, 84+/-9, 101+/-4, 106+/-32mmolg(-1) by Freundlich, 8+/-0.1, 9+/-0.1, 10+/-0.3, 9+/-0.1mmolg(-1) by Langumir and 15+/-1, 21+/-1, 23+/-2, 22+/-3mmolg(-1) by D-R isotherms respectively, from BTEC solutions at 303K. While the mean energy of sorption process 9.6+/-0.3, 9.2+/-0.2, 9.3+/-0.3, 9.5+/-0.4kJmol(-1) for BTEC is calculated by D-R isotherm only. Rate constant of BTEC onto MOP 0.033+/-0.003, 0.030+/-0.002, 0.029+/-0.002, 0.027+/-0.002min(-1) at solution concentration of 1.3x10(-3), 1.1x10(-3), 0.9x10(-3) and 0.8x10(-3)moldm(-3) and at 303K have been calculated by employing Lagergren equation. Thermodynamic parameters DeltaH -8+/-0.4, -10+/-0.6, -11+/-0.7, -11+/-0.7kJmol(-1), DeltaS -22+/-2, -26+/-2, -27+/-2, -29+/-3Jmol(-1)K(-1) and DeltaG(303K) -0.9+/-0.2, -1.9+/-0.2, -2.3+/-0.1 and -2.6+/-0.2kJmol(-1) were also estimated for BTEC respectively at temperatures 283-308K. The negative values of DeltaH, DeltaS and DeltaG suggest exothermic, stable (with no structural changes at solid-liquid interface) and spontaneous nature of sorption process under optimized conditions. MOP has been used extensively to accrue and then to preconcentrate benzene, toluene and ethylbenzene in wastewater sample.

Sawdust--a green and economical sorbent for the removal of cadmium (II) ions

The ability of sawdust (treated and untreated) waste, a waste material derived from the commercial processing of cedrus deodar wood for furniture production, to remove/preconcentrate Cd(II) ions from aqueous solution was determined. Sorption was found to be rapid (approximately 97% within 8 min). The binding of metal ions was found to be pH dependent, optimal sorption accruing at around pH 4-8. Potentiometric titrations of sawdust revealed two distinct pK(a) values, the first having the value similar to carboxylic groups (3.3-4.8) and second comparable with that of amines (8.53-10.2) with the densities 1.99 x 10(-4) and 7.94 x 10(-5), respectively. Retained Cd(II) ions were eluted with 5 ml of 0.1 mol l(-1) HCl. Detection limit of 0.016 microg ml(-1) was achieved with enrichment factors of 120. Recovery was quantitative using sample volume of 600 ml. The Langmuir and D-R isotherm equations were used to describe partitioning behavior for the system at different temperatures. Kinetic and thermodynamic behavior of sawdust for Cd(II) ions removal was also studied.

A Rapid Spectrophotometric Method for the Determination of Trace Level Lead Using 1,5-Diphenylthiocarbazone in Aqueous Micellar Solutions

A very simple, ultra-sensitive and fairly selective direct spectrophotmetric method is presented for the rapid determination of lead(II) at ultra-trace level using 1,5-diphenylthiocarbazone (dithizone) in micellar media. The presence of the micellar system avoids the previous steps of solvent extraction and reduces the cost and toxicity while enhancing the sensitivity, selectivity and the molar absorptivity. The molar absorptivities of the lead-dithizone complex formed in the presence of the cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost ten times the value observed in the standard method, resulting in an increase in the sensitivity of the method. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient was found to be 3.99 x 10(5) L mol(-1) cm(-1) and Sandell's sensitivity was 30 ng cm(-2) of Pb. Linear calibration graphs were obtained for 0.06-60 mg L(-1) of Pb(II); the stoichiometric composition of the chelate is 1:2 (Pb:dithizone). The interference from over 50 cations, anions and complexing agents has been studied at 1 mg L(-1) of Pb(II). The method was successfully used in the determination of lead in several standard reference materials (alloys and steels), environmental water samples (potable and polluted), biological samples (human blood and urine), soil samples and solutions containing both lead(II) and lead(IV) and complex synthetic mixtures. The method has high precision and accuracy (sigma = +/-0.01 for 0.5 mg L(-1)).

Fatty acid composition of Abies pindrow (West Himalayan fir)

The leaves of Abies pindrow, collected from Murree Hills, Punjab (Pakistan) revealed the presence of eleven fatty acids including eight saturated and three unsaturated fatty acids. They ranged from C(14) to C(24) and were detected as methyl esters by GC-MS technique. The saturated fatty acids were present in much greater proportion than unsaturated ones. Isopalmatic acid was found to be major saturated fatty acid and the oleic acid as predominant unsaturated acid. (+)-14-Methyl palmatic acid and (+)-Isosteric acid were the next higher saturated and unsaturated fatty acids respectively.

Low cost sorbents for the removal of methyl parathion pesticide from aqueous solutions

Sorptive potential of selected agricultural waste materials i.e. rice (Oryza sativa) bran (RB), bagasse fly ash (BFA) of sugarcane (Saccharum officinarum), Moringa oleifera pods (MOP) and rice husk (RH) for the removal of methyl parathion pesticide (MP) from surface and ground waters has been investigated. Optimization of operating parameters of sorption process, i.e. sorbent dose, agitation time, pH, initial concentration of sorbate, and temperature have been studied. The sorption data fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum capacities of RB, BFA, MOP and RH for MP were calculated to be 3.6+/-0.8, 5.3+/-1.4, 5.2+/-1.5 and 4.7+/-1.0 mmolg(-1) by Freundlich, 0.39+/-0.009, 0.39+/-0.005, 0.36+/-0.004 and 0.35+/-0.008 mmolg(-1) by Langmuir and 0.9+/-0.08, 1.0+/-0.10, 1.0+/-0.10 and 0.9+/-0.07 mmolg(-1) by D-R isotherms respectively, employing 0.1g of each sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity. Thermodynamic parameters of sorption process, i.e. DeltaH, DeltaS and DeltaG were computed and their negative values indicated the exothermic and spontaneous nature of sorption process. The pesticide may be stripped by sonication with methanol, making the regeneration and reutilization of sorbents promising. The sorbents investigated exhibited their potential applications in water decontamination, treatment of industrial and agricultural waste waters.

Capillary gas chromatographic determination of phenylpropanolamine in pharmaceutical preparation

Analytical procedure has been developed for the gas chromatographic determination of phenylpropanolamine (PPA) using trifluoroacetylacetone (FAA) as derivatizing reagent. Elution is carried out from the column HP-5 (30 mx0.32 mm i.d.) with film thickness 0.25 microm at initial column temperature 70 degrees C for 5 min, followed by heating rate 10 degrees C/min up to 120 degrees C. Injection port temperature was maintained at 270 degrees C. Nitrogen flow rate was 2 ml/min and detection was by FID. The linear calibration curve was obtained with 30-150 microg/ml PPA with detection limit of 6.0 microg/ml. The method was used for the determination of PPA from Sinutab and Tavegyl-D tablets. The relative standard deviation (R.S.D.) for the analysis of pharmaceutical preparation was obtained within 0.4-0.9%.

Antioxidant Properties of Methanolic Extracts from Leaves of Rhazya stricta

Because of increased safety concerns about synthetic antioxidants, exploitation of cheaper and safer sources of antioxidants based on natural origin is the focus of research nowadays. Rhazya stricta is a medicinally important plant native to South Asia. Extraction of antioxidants was carried out in different solvent systems, i.e., water, 80% methanol, 70% ethanol, and diethyl ether. The methanolic extract exhibited the highest total phenolic content among the extracts; therefore for further studies the methanolic extract was employed. Antioxidant activity measurement in the linoleic acid system, metal chelating activity, reducing power, scavenging effect on 1,1-diphenyl-2-picrylhydrazyl free radical, and superoxide anion radical scavenging activity were taken as the parameters for assessment of antioxidant potential of methanolic extracts. Results were compared with alpha-tocopherol and the synthetic antioxidant butylated hydroxyanisole. The antioxidant potential of methanolic extracts of R. stricta leaves was comparable with previously exploited potent antioxidants and is strongly concentration dependent.

Sorption potential of rice husk for the removal of 2,4-dichlorophenol from aqueous solutions: kinetic and thermodynamic investigations

The sorption potential of chemically and thermally treated rice husk (RHT) for the removal of 2,4-dichlorophenol (DCP) from aqueous solutions has been investigated. Sorption of DCP by rice husk was observed over a wide pH range of 1-10. The effect of contact time between liquid and solid phases, sorbent dose, pH, concentration of sorbate and temperature on the sorption of DCP onto rice husk has been studied. The pore area and average pore diameter of RHT by BET method are calculated to be 17+/-0.6 m2g-1 and 51.3+/-1.5 nm, respectively. Maximum sorption (98+/-1.2%) was achieved for RHT from 6.1x10(-5) moldm(-3) of sorbate solution using 0.1g of rice husk for 10 min agitation time at pH 6 and 303K, which is comparable to activated carbon commercial (ACC) 96.6+/-1.2%, but significantly higher than chemically treated rice husk (RHCT) 65+/-1.6% and rice husk untreated (RHUT) 41+/-2.3%. The sorption data obtained at optimized conditions was subjected to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. Sorption intensity 1/n (0.31+/-0.01) and sorption capacity multilayer C(m) (12.0+/-1.6 mmolg(-1)) have been evaluated using Freundlich sorption isotherm, whereas the values of sorption capacity monolayer Q (0.96+/-0.03 mmolg(-1)) and binding energy, b, (4.5+/-1.0)x10(4)dm(3)mol(-1) have been estimated by Langmuir isotherm. The Langmuir constant, b, was also used to calculate the dimensionless factor, R(L), in the concentration range (0.6-6.1)x10(-4) moldm(-3), suggesting greater sorption at low concentration. D-R sorption isotherm was employed to calculate sorption capacity X(m) (2.5+/-0.07 mmolg(-1)) and sorption energy E (14.7+/-0.13 kJmol(-1)). Lagergren and Morris-Weber equations were employed to study kinetics of sorption process using 0.2g of RHT, 25 cm(3) of 0.61x10(-4)moldm(-3) sorbate concentration at pH 6, giving values of first-order rate constant, k, and rate constant of intraparticle transport, R(id), (0.48+/-0.04 min(-1) and 6.8+/-0.8 nmolg(-1)min(-1/2), respectively) at 0.61x10(-4)moldm(-3) solution concentration of DCP, 0.1g RHT, pH 6 and 2-10min of agitation time. For thermodynamic studies, sorption potential was examined over temperature range 283-323 K by employing 6.1x10(-4)moldm(-3) solution concentration of DCP, 0.1g RHT at pH 6 and 10 min of agitation time and values of DeltaH (-25+/-1 kJmol(-1)), DeltaS (-61+/-4 Jmol(-1)K(-1)) and DeltaG(303K) (-7.1+/-0.09 kJmol(-1)) were computed. The negative values of enthalpy, entropy, and free energy suggest that the sorption is exothermic, stable, and spontaneous in nature.

Efficiency of rice bran for the removal of selected organics from water: kinetic and thermodynamic investigations

The sorption efficiency of indigenous rice (Oryza sativa) bran for the removal of organics, that is, benzene, toluene, ethylbenzene, and cumene (BTEC), from aqueous solutions has been studied. The sorption of BTEC by rice bran is observed over a wide pH range of 1-10, indicating its high applicability to remove these organics from various industrial effluents. Rice bran effectively adsorbs BTEC of 10 microg mL(-1) sorbate concentration from water at temperatures of 283-323 +/- 2 K. The effect of pH, agitation time between solid and liquid phases, sorbent dose, its particle size, and temperature on the sorption of BTEC onto rice bran has been studied. The pore area and average pore diameter of rice bran by BET method are found to be 19 +/- 0.7 m(2) g(-1) and 52.8 +/- 1.3 nm. The rice bran exhibits appreciable sorption of the order of 85 +/- 3.5, 91 +/- 1.8, 94 +/- 1.4, and 96 +/- 1.2% for 10 microg mL(-1) concentration of benzene, toluene, ethylbenzene, and cumene, respectively, in 60 min of agitation time using 0.1 g of rice bran at pH 6 and 303 K. The sorption data follow Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) models. Sorption capacities have been computed for BTEC by Freundlich (32 +/- 3, 61 +/- 14, 123 +/- 28, and 142 +/- 37 m mol g(-1)), Langmuir (6.6 +/- 0.1, 7.5 +/- 0.13, 9.5 +/- 0.22, and 9.4 +/- 0.18 m mol g(-1)), and D-R isotherms (11 +/- 0.5, 16 +/- 1.3, 30 +/- 2.2, and 33 +/- 2.5 m mol g(-1)), respectively. The Lagergren equation is employed for the kinetics of the sorption of BTEC onto rice bran and first-order rate constants (0.03 +/- 0.002, 0.04 +/- 0.003, 0.04 +/- 0.003, and 0.05 +/- 0.004 min(-1)) have been computed for BTEC at their concentration of 100 mug mL(-1) at 303 K. Studies on the variation of sorption with temperatures (283-323 K) at 100 mug mL(-1) sorbate concentration gave thermodynamic constants DeltaH (kJ mol(-1)), DeltaG (kJ mol(-1)), and DeltaS (J mol(-1) K(-1)). The results indicate that the sorption of organics onto rice bran is exothermic and spontaneous in nature under the optimized experimental conditions selected. This sorbent has been used successfully to accumulate and then to determine benzene, toluene, and ethylbenzene in wastewater sample.

Enrichment of Pb(II) ions using phthalic acid functionalized XAD-16 resin as a sorbent

A simple and reliable method has been developed using polymeric material containing phthalic acid as a chelating agent to concentrate ultratrace amounts of lead ions in aqueous solutions. After characterization by CHN, IR, and thermal studies, the static and dynamic sorption behavior of Pb(II) ions onto new synthetic resin has been investigated. The sorption has been optimized with respect to pH, shaking speed, and contact time between the two phases. Maximum sorption is achieved from solution of pH 5-8 after 10 min agitation time. The lowest concentration for quantitative recovery is 5.8 ng cm(-3) with a preconcentration factor of approximately 850. The kinetics of sorption follows the first-order rate equation with the rate constant k=0.58+/-0.04 min(-1). The variation of the equilibrium constant K(c) with temperature between 10 and 50 degrees C yields values of DeltaH, 52.4+/-1.65 kJmol(-1), DeltaS, 186+/-5.21 Jmol(-1)K(-1), and DeltaG(303K), -4.15+/-0.002 kJmol(-1). The sorption data of Pb(II) ions in the concentration range from 2.41x10(-6) to 1.44x10(-4) molL(-1) follows the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms at all temperatures investigated. The sorption of Pb(II) ions onto synthesized resin in the presence of common anions and cations has also been measured. The possible sorption mechanism of Pb(II) ions onto phthalic acid modified XAD-16 is also discussed. The sorption procedure is utilized to preconcentrate Pb(II) ions prior to their determination in automobile exhaust particulates by atomic absorption spectrometry using direct and standard addition methods.

Preconcentration and separation of Cr(III) and Cr(VI) using sawdust as a sorbent

A simple, inexpensive method based on solid-phase extraction (SPE) on sawdust from Cedrus deodera has been developed for speciation of Cr(III) and Cr(VI) in environmental water samples. Because different exchange capacities were observed for the two forms of chromium at different pH-Cr(III) was selectively retained at pH 3 to 4 whereas Cr(VI) was retained at pH 1-complete separation of the two forms of chromium is possible. Retained species were eluted with 2.5 mL 0.1 mol L(-1) HCl and 0.1 mol L(-1) NaOH. Detection limits of 0.05 and 0.04 microg mL(-1) were achieved for Cr(III) and Cr(VI), respectively, with enrichment factors of 100 and 80. Recovery was quantitative using 250 mL sample volume for Cr(III) and 200 mL for Cr(VI). Different kinetic and thermodynamic properties that affect sorption of the chromium species on the sawdust were also determined. Metal ion concentration was measured as the Cr(VI)-diphenylcarbazide complex by UV-visible spectroscopy. The method was successfully applied for speciation of chromium in environmental and industrial water samples.

Determination of preservatives in cosmetics and food samples by micellar liquid chromatography

An analytical procedure has been developed for the analysis of benzoic acid, p-hydroxybenzoic acid, methyl-, ethyl-, propyl-, isopropyl-, and butyl esters of p-hydroxybenzoic acid by micellar liquid chromatography. After dilution in n-propanol the sample was directly injected onto a Lichrosorb ODS, 5 microm (250 x 4.6 mm ID) column and eluted with aqueous 2% Brij-35 adjusted to pH 3.0 with phosphoric acid:propanol (80:20 v/v) at a flow rate of 1 mL min(-1) and UV detection at 254 nm. A linear calibration curve was obtained simultaneously for each component in the range of 50-500 microg mL(-1) for benzoic acid and 5-150 microg mL(-1) for the other components; detection limits were within 25-250 ng mL(-1) corresponding to 125-1250 pg per injection (5 microL). The reproducibility in terms of average peak area and average retention time was obtained with coefficients of variation (CV) of 1.2% and 0.5%. The method was applied to analysis of these compounds in cosmetics (shampoos, hand lotions, creams, and bath foam) and food samples.

A Simple Spectrophotometric Determination of Trace Level Mercury Using 1,5-Diphenylthiocarbazone Solubilized in Micelle

A very simple, ultra-sensitive and fairly selective non-extractive spectrophotmetric method is presented for the rapid determination of mercury(II) at ultra-trace level using 1,5-diphenylthiocarbazone (dithizone) as a new micellar spectrophotometric reagent (lambdamax = 490 nm) in a slightly acidic (0.07 - 0.17 M H2SO4) aqueous solution. The presence of a micellar system avoids the previous steps of solvent extraction and reduces the cost, toxicity while enhancing the sensitivity, selectivity and the molar absorptivity. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 5.02 x 10(4) L mol(-1) cm(-1) and 10 ng cm(-2) of Hg, respectively. Linear calibration graphs were obtained for 0.05 - 10 mg L(-1) of Hg; the stoichiometric composition of the chelate is 1:2 (Hg:dithizone). The method is characterized by a detection limit of 1 microg L(-1) of Hg. Large excesses of over 60 cations, anions and complexing agents (e.g. EDTA, tartrate, oxalate, citrate, phosphate, thiourea, azide, SCN-) do not interfere in the determination. The method was successfully applied to a number of environmental water samples (potable and polluted), biological samples (human blood and urine; milk and fish) and soils; solutions contained both mercury(I) and mercury(II) as well as complex synthetic mixtures. The method has high precision and accuracy (s = +/-0.01 for 0.1 mg L(-1)).

Analytical characterization of Moringa oleifera seed oil grown in temperate regions of Pakistan

The hexane-extracted oil content of Moringa oleifera seeds ranged from 38.00 to 42.00%. Protein, fiber, and ash contents were found to be 26.50-32.00, 5.80-9.29, and, 5.60-7.50%, respectively. Results of physical and chemical parameters of the extracted oil were as follows: iodine value, 68.00-71.80; refractive index (40 degrees C), 1.4590-1.4625; density (24 degrees C), 0.9036-0.9080 mg/mL; saponification value, 180.60-190.50; unsaponifiable matter, 0.70-1.10%; and color (1 in. cell), 0.95-1.10 R + 20.00-35.30 Y. Tocopherols (alpha, gamma, and delta) in the oil were up to 123.50-161.30, 84.07-104.00, and 41.00-56.00 mg/kg, respectively. The oil was found to contain high levels of oleic acid (up to 78.59%) followed by palmitic, stearic, behenic, and arachidic acid up to levels of 7.00, 7.50, 5.99, and 4.21%, respectively. The induction period (Rancimat, 20 L/h, 120 degrees C) of the crude oil was 9.99 h and reduced to 8.63 h after degumming. Specific extinctions at 232 and 270 nm were 1.70 and 0.31, respectively. Many parameters of M. oleifera oil indigenous to Pakistan were comparable to those of typical Moringa seed oils reported in the literature. The results of the present analytical study were also compared with those of different vegetable oils.

Gas and liquid chromatography of metal chelates of pentamethylene dithiocarbamate

Capillary GC and HPLC of metal chelates of pentamethylene dithiocarbamate were examined. Copper(II), nickel(II), cobalt(III), iron(III), manganese(II) and chromium(III) chelates formed in slightly acidic media (pH 5) were extracted in methyl isobutyl ketone or chloroform. Capillary GC elution and separation was carried out on methylsilicone DB-1 column (25 m x 0.2 mm I.D.) with film thickness 0.25 microm. Electron-capture detection was used. Elution was carried at initial column temperature 200 degrees C with an increment at a rate of 5 degrees C/min up to 250 degrees C and maximum temperature was maintained for 10 min. Symmetrical peaks with baseline separation were obtained with the metal chelates investigated with linear calibration range between 5 and 25 microg/ml for each metal ion and detection limits in the range of 0.5-6.0 microg/ml corresponding to 27-333 pg of metal ion reaching to the detector. HPLC separation was carried out from LiChrosorb ODS, 5 microm column and complexes eluted with methanol-water-1 mM sodium acetate (70:28:2, v/v) with a flow-rate of 1.2 ml/ml. UV detection was at 260 nm. The detection limits obtained were in the range 2-6 microg/ml. The methods were applied to the determination of metal ions in canal water and coal samples with RSD values within 4.15%. The results when compared with a standard flame atomic absorption spectrophotometric method and revealed no significant difference.

Analytical characterization of Salicornia bigelovii seed oil cultivated in Pakistan

Seeds of Salicornia bigelovii (hybrid variety sos-10) were collected from five coastal areas of Pakistan on the Arabian Sea. Hexane-extracted oil content was 27.2-32.0%. Results of other physical and chemical parameters of the extracted oil were as follows: iodine value, 128.0-130.5; refractive index (40 degrees C), 1.4680-1.4695; unsaponifiable matter, 1.63-2.00%; saponification value, 178.6-189.0; density (30 degrees C), 0.9036-0.9074. Tocopherols (alpha, gamma, and delta) in the oil ranged up to 200 mg/kg. The S. bigelovii seed oil was found to contain high levels of linoleic acid (74.66-79.49%) and less oleic acid (12.33-16.83%). Saturated fatty acids, palmitic and stearic acids, ranged from 7 to 8.50% and from 1.24 to 1.69%, respectively. Linolenic acid (C(18:3) omega-3) was found within the range of 1.50-2.31%. The induction period (Rancimat, 20 L/h, 120 degrees C) of the crude oil was 1.40-1.70 h. Specific extinctions at 232 and 270 nm were 1.90-2.40 and 0.40-0.62, respectively. Many parameters of S. bigelovii seed oil were quite compatible with those of safflower oil.

Capillary gas chromatographic determination of putrescine and cadaverine in serum of cancer patients using trifluoroacetylacetone as derivatizing reagent

Trifluoroacetylacetone (FAA) derivatives of 1,4-diaminobutane (putrescine) (Pu) and 1,5-diaminopentane (cadaverine) (CA) were prepared and characterized by elemental microanalysis, IR, and mass spectrometry. Diamine derivatives were eluted from capillary gas chromatographic (CGC) column BP1 (12 m x 0.22 mm I.D.) or BP5 (50 m x 0.22 mm) with layer thickness 0.25 microm, using nitrogen as a carrier gas and flame ionization detection (FID). A solvent extraction procedure was developed for the extraction of Pu and CA from aqueous solution with a linear calibration range 0-20 microg/0.2 ml of extract with a detection limit of 0.5-0.6 ng/injection. The method was applied for the determination of Pu and CA in the serum of five cancer patients before and after radiotherapy. The serum of two healthy persons was also analyzed for Pu and CA contents. Pu and CA concentrations were found within the range 1.16-3.96 microg/ml and 0.88-1.46 microg/ml in cancer patients as compared to 0.11-0.16 microg/ml and 0.06-0.075 microg/ml respectively in healthy persons with a coefficient of variation (CV) within 0.62-5.47%. Pu and CA concentrations decreased on radiotherapy in cancer patients, but were much higher than in healthy persons.

Simultaneous determination of oxalic and citric acids in urine by high-performance liquid chromatography

A simple method for the simultaneous determination of oxalic and citric acids had been developed using reversed-phase HPLC. An aqueous solution containing potassium dihydrogen phosphate (0.25%) and tetrabutylammonium hydrogen sulphate (2.5 mmol) at pH 2.0 was used as mobile phase. Under these conditions both the components were well resolved and detected at 210 nm. The recovery for oxalic and citric acids was 97% and 102%, respectively. The method presented here was applied to urine specimens of a large number of urolithic patients and control subjects. Because of the simplicity of the method its application provides better means of monitoring the concentration of oxalic and citric acids in the formation of renal calculi.

Communication : A SIMPLE METHOD FOR THE DETERMINATIONOF CHLORPROMAZINE IN PHARMACEUTICALPREPARATIONS AND BLOOD SERUM

A simple rapid and accurate method is described for the analysis of chlorpromazine. The method utilises reverse phase HPLC with a methanol: water system 50:50 as mobile phase and UV detection. The same has been successfully applied on locally available pharmaceutical preparations and in blood serum after drug administration.